ZH
RU
ES

pO243

pO243, Total:96 items.

In the international standard classification, pO243 involves: Installations in buildings, Electrical accessories, Protection against fire, Printed circuits and boards, Iron and steel products, Valves, Medical equipment, Components for electrical equipment, Compressors and pneumatic machines, Products of the chemical industry, Rubber and plastics products, Beverages, Insulation, Protective equipment, Resistors, Lubricants, industrial oils and related products, Insulating materials, Geology. Meteorology. Hydrology, Fluid storage devices.

British Standards Institution (BSI), pO243

20/30427095 DC BS EN 60364-4-43. Low-voltage electrical installations. Part 4-43. Protection for safety. Protection against overcurrent
18/30347399 DC BS EN 60364-4-43. Low-voltage electrical installations. Part 4-43. Protection for safety. Protection against overcurrent

Lithuanian Standards Office , pO243

LST HD 60364-4-43-2010 Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent (IEC 60364-4-43:2008, modified + corrigendum Oct. 2008)
LST EN 125200-2001 Sectional specification. Magnetic oxide cores for linear transformers
LST 1983-2-2005 Beer. Determination of carbon dioxide content. Part 2: Pressure method
LST EN 60601-3-1-2001 Medical electrical equipment. Part 3-1: Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment (IEC 60601-3-1:1996)

German Institute for Standardization, pO243

DIN VDE 0100-430:2010 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent (IEC 60364-4-43:2008, modified + corrigendum Oct. 2008); German implementation HD 60364-4-43:2010
DIN EN 61249-2-43:2017 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), co
DIN EN 125200:1993-02 Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991
DIN EN 125200:1993 Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991
DIN 13256-4:2002 Pressure vessels for human occupancy - Part 4: One human pressure vessels for hyperbaric therapy; Safety requirements and testing
DIN 3174-1:2000 Respiratory equipment - Cylinder valves - Part 1: Cylinder valves for compressed oxygen
DIN 13256-6:2002 Pressure vessels for human occupancy - Part 6: Connecting flange for rescue chambers
DIN 3171-1:2000 Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 1: Seamless steel cylinders, for 300 bar and 450 bar test pressure
DIN 3171-2:2000 Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 2: Composite cylinders for 300 bar and 450 bar test pressure
DIN 58651-2:1997-10 Respiratory protective devices - Self-contained closed-circuit breathing apparatus, compressed oxygen type - Part 2: Short duration-compressed oxygen type for moderate work rates; requirements, testing, marking

Japanese Industrial Standards Committee (JISC), pO243

JIS C 60364-4-43:2011 Low-voltage electrical installations -- Part 4-43: Protection for safety -- Protection against overcurrent
JIS K 2514-3:2013 Lubricating oils.Determination of oxidation stability.Part 3: Oxidation stability by rotating pressure vessel

ES-UNE, pO243

HD 60364-4-43:2023 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
UNE-EN 61249-2-43:2016 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test),...

Korean Agency for Technology and Standards (KATS), pO243

KS C IEC 60364-4-43:2012 Low-voltage electrical installations－Part 4-43：Protection for safety－Protection against overcurrent
KS C IEC 60364-4-43:2022 Low-voltage electrical installations — Part 4-43: Protection for safety — Protection against overcurrent
KS C IEC 60364-4-43-2012(2017) Low-voltage electrical installations－Part 4-43：Protection for safety－Protection against overcurrent
KS C IEC 60601-3-1:2008 Medical electrical equipment-Part 3-1:Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
KS C IEC 60601-3-1:2014 Medical electrical equipment－Part 3－1：Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
KS C IEC 60601-2-23:2002 Medical electrical equipment－Part 2－23： Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment
KS C IEC 61643-331-A:2014 Component for low-voltage surge protective devices — Part 331: Specification for metal oxide varistors(MOV)
KS C IEC 61643-331-2006(2019) Components for low－voltage surge protective devices－Part 331：Specification for metal oxide varistors(MOV)
KS C IEC 61643-331-A:2015 Component for low-voltage surge protective devices — Part 331: Specification for metal oxide varistors(MOV)
KS C IEC 61643-331:2006 Components for low－voltage surge protective devices－Part 331：Specification for metal oxide varistors(MOV)
KS C IEC 60601-3-1-2008(2013) Medical electrical equipment－Part 3－1：Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment

VN-TCVN, pO243

TCVN 7447-4-43-2010 Low-voltage electrical installations.Part 4-43: Protection for safety.Protection against overcurrent

PH-BPS, pO243

PNS IEC 60364-4-43:2021 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent

International Electrotechnical Commission (IEC), pO243

IEC 60364-4-43:2008/COR1:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 60364-4-43:2023 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 60601-3-1:1996 Medical electrical equipment - Part 3-1: Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
IEC 61249-2-43:2016 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate she
IEC 61643-331:2003 Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV)

RU-GOST R, pO243

GOST R 50571.4.43-2012 Low-voltage electrical installations. Part 4-43. Protection for safety. Protection against overcurrent

AENOR, pO243

UNE-HD 60364-4-43:2013 Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent
UNE-EN 60601-3-1:1997 MEDICAL ELECTRICAL EQUIPMENT. PART 3-1: ESSENTIAL PERFORMANCE REQUIREMENT FOR TRANSCUTANEOUS OXYGEN AND CARBON DIOXIDE PARTIAL PRESSURE MONITORING EQUIPMENT.

European Committee for Electrotechnical Standardization（CENELEC）, pO243

HD 60364-4-43:2010 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
EN 125200:1991 Sectional Specification: Magnetic Oxide Cores for Linear Transformers
EN 61249-2-43:2016 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), co

Danish Standards Foundation, pO243

DS/HD 60364-4-43:2010 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
DS/EN 60601-3-1:1998 Medical electrical equipment - Part 3-1: Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
DS/IEC 723-3:1987 Inductor and transformer cores for telecommunications - Part 3: Sectional specification: Magnetic oxide cores for broad-band transformers
DS/IEC 723-3-1:1987 Inductor and transformer cores for telecommunications. Part 3: Blank detail specification: Magnetic oxide cores for broad-band transformers. Assessment levele A and B

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pO243

GB/T 16895.5-2012 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
GB 16895.5-2012 Low-voltage electrical installations.Part 4-43 Protection for safety.Protection against overcurrent
GB/T 18802.331-2007 Components for low-voltage surge protective devices.Part 331:Specifiecation for metal oxide varistors(MOV)
GB/T 9626-1988 Inductor and transformer cores for telecommunications--Part 3:Sectional specification: Magnetic oxide cores for broad-band transformers
GB/T 1303.4-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 4:Requirements for rigid laminated sheets based on epoxy resins

KR-KS, pO243

KS C IEC 60364-4-43-2022 Low-voltage electrical installations — Part 4-43: Protection for safety — Protection against overcurrent
KS C IEC 61643-331-A-2014 Component for low-voltage surge protective devices — Part 331: Specification for metal oxide varistors(MOV)

国家能源局, pO243

NB/T 20006.43-2018 Alloy steel for pressurized water reactor nuclear power plants Part 43: Alloy steel plates for safety grade equipment

未注明发布机构, pO243

NB 20006.43-2018 Alloy steel for pressurized water reactor nuclear power plants Part 43: Alloy steel plates for safety grade equipment
BS EN 60601-3-1:1997 Medical electrical equipment — Part 3 : Particular requirements for performance — Section 3.1 : Specification for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment

(U.S.) Ford Automotive Standards, pO243

FORD M3D112-A-1989 EPOXY LAMINATING RESIN, TWO COMPONENT

Defense Logistics Agency, pO243

DLA AN6015 REV 6 NOTICE 2-1999 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
DLA AN6015 REV 6 NOTICE 1-1999 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
DLA AN6015 REV 6-1972 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B

Association Francaise de Normalisation, pO243

NF EN 61249-2-43:2016 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-43 : matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées renforcées en verre de type E tissé/papier cellulose époxyde non halogéné, pl...
NF EN 60601-3-1:2002 Appareils électromédicaux - Partie 3-1 : prescriptions essentielles de performances pour les appareils de surveillance de la pression partielle transcutanée de l'oxygène et du dioxyde de carbone
NF C74-031*NF EN 60601-3-1:2002 Medical electrical equipment - Part 3-1 : essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
NF C52-320*NF EN 125200:1991 Sectional Specification : magnetic oxide cores for linear transformers
NF C93-780-2-43*NF EN 61249-2-43:2016 Materials for printed boards and other interconnecting structures - Part 2-43 : reinforced base materials clad and unclad - Non halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), c
NF EN IEC 61643-331:2020 Composants pour parafoudres basse tension - Partie 331 : exigences de performance et méthodes d'essai pour les varistances à oxyde métallique (MOV)

Professional Standard - Machinery, pO243

JB/T 50016-1999 Reciprocating Piston Medium Pressure Oxygen Compressor Product Quality Grading
JB/T 56073.25-1999 Epoxy laminated glass cloth pipe product quality classification
JB/T 11848-2014 Oxygen centrifugal compressor used in air separation plants
JB/T 53148-1999 Product quality classification of non-lubricated reciprocating piston high-pressure oxygen compressors

Standard Association of Australia （SAA）, pO243

AS/NZS 4774.2:2019 Work in compressed air and hyperbaric facilities, Part 2: Hyperbaric Oxygen facilities

Professional Standard - Chemical Industry, pO243

HG/T 2779-2009 Sulfur-tolerant carbon monoxide shift catalysts(low pressure part)
HG/T 2780-2009 Test method of activity for sulfur-tolerant carbon monoxide shift catalysts(low pressure part)

Professional Standard - Energy, pO243

NB/T 20007.43-2016 Stainless steel for pressurized water reactor nuclear power plants.Part 43: 022Cr17Ni12Mo2N austenitic stainless steel forgings used for nozzles for reactor coolant piping

American Society for Testing and Materials (ASTM), pO243

ASTM D6778-06 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials

CENELEC - European Committee for Electrotechnical Standardization, pO243

EN 60601-3-1:1996 Medical Electrical Equipment Part 3-1: Essential Performance Requirements for Transcutaneous Oxygen and Carbon Dioxide Partial Pressure Monitoring Equipment

IN-BIS, pO243

IS 13674 Pt.3-1993 Dimensions of ferrite components for CTV. Part 3: Cores for smps transformer
IS 10810 Pt.16-1986
IS 8198 Pt.9-1988
IS 10245 Pt.1-1982
IS 13901 Pt.2-1993 Dimensions of ferrite components for CTV. Part 2: Cores for line output transformers

CZ-CSN, pO243

CSN IEC 723-3:1994 Inductor and transformer cores for telecommunications.Part 3:Sectional specification:Magnetic oxide cores for broad-band transformers
CSN IEC 723-4:1994 Inductor and transformer cores for telecommunications.Part 4:Sectional specification:Magnetic oxide cores for transformers and chokes for power applications
CSN IEC 723-2:1993 Inductor and transformer cores for telecommunications

TH-TISI, pO243

TIS 1717-1998 Inductor and transformer cores for telecommunications.part 3: sectional specification: magnetic oxide cores for broad.band transformers
TIS 1719-1998 Inductor and transformer cores for telecommunications.part 4: sectional.Specification: magnetic oxide cores for transformers and chokes for power applications

Professional Standard - Ocean, pO243

HY/T 0343.7-2022 Technical Regulations for Monitoring and Evaluation of Sea-Air Carbon Dioxide Exchange Flux Part 7: On-site Monitoring of Carbon Dioxide Partial Pressure Data Processing

European Committee for Standardization (CEN), pO243

EN 12373-17:2001 Aluminium and Aluminium Alloys - Anodizing - Part 17: Determination of Electric Breakdown Potential

SAE - SAE International, pO243

SAE AMS3733C-2015 Potting Compound@ Epoxy Two Part@ Highly Filled@ Heat Cure@ High Compressive Strength

IECQ - IEC: Quality Assessment System for Electronic Components, pO243

QC 250200-1985 Inductor and Transformer Cores for Telecommunications Part 3: Sectional Specification: Magnetic Oxide Cores for Broad-Band Transformers (IEC 723-3 ED 1)

Society of Automotive Engineers (SAE), pO243

SAE AMS3733A-2011 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
SAE AMS3733-1987 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength

NZ-SNZ, pO243

AS/NZS 3200.3.1:1998 Approval and Test Specification - Medical Electrical Equipment Part 3.1: Essential Performance Requirements for Transcutaneous Oxygen and Carbon Dioxide Partial Pressure Monitoring Equipment