ZH
RU
ES

Fracture toughness linear

Fracture toughness linear, Total:418 items.

In the international standard classification, Fracture toughness linear involves: Plastics, Testing of metals, Conducting materials, Ceramics, Materials for the reinforcement of composites, Lifting equipment, Powder metallurgy, Textile fibres, Non-ferrous metals, Fishing and fish breeding, Glass, Materials for aerospace construction, Welding, brazing and soldering, Pipeline components and pipelines, Cutting tools, Nuclear energy engineering, Reinforced plastics, Paper and board, Products of non-ferrous metals, Electrical wires and cables, Products of the textile industry, Waxes, bituminous materials and other petroleum products, Construction materials, Rubber and plastics products, Sports equipment and facilities, Test conditions and procedures in general, Clothes.

WRC - Welding Research Council, Fracture toughness linear

BULLETIN 457-2000 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: FRACTURE TOUGHNESS OF FERRITIC STEELS AND ASTM REFERENCE TEMPERATURE (TA)
BULLETIN 458-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: APPLICATION OF MASTERCURVE FRACTURE TOUGHNESS METHODOLOGY FOR FERRITIC STEELS
BULLETIN 486-2003 INDEXING FRACTURE TOUGHNESS DATA
BULLETIN 459-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: MASTER CURVE STRATEGIES FOR RPV ASSESSMENT
BULLETIN 345-1989 ASSESSING FRACTURE TOUGHNESS AND CRACKING SUSCEPTIBILITY OF STEEL WELDMENTS - A REVIEW
BULLETIN 205-1975 FRACTURE TOUGHNESS AND RELATED CHARACTERISTICS OF THE CRYOGENIC NICKEL STEELS
BULLETIN 358-1990 THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTURE TOUGHNESS OF A HIGH-STRENGTH LOW-STRAIN HARDENING STEEL
BULLETIN 351-1990 AN ANALYTICAL COMPARISON OF SHORT CRACK AND DEEP CRACK CTOD FRACTURE SPECIMENS OF AN A36 STEEL ; THE EFFECTS OF CRACK DEPTH ON ELASTIC-PLASTIC CTOD FRACTURE TOUGHNESS; A COMPARISON OF THE J-INTEGRAL A
BULLETIN 375-1992 THE SIGNIFICANCE OF THE A/W RATIO ON FRACTURE TOUGHNESS OF A-36 STEEL
BULLETIN 418-1997 CONSTRAINT EFFECTS ON FRACTURE BEHAVIOR: I) THE EFFECT OF CRACK DEPTH (A) AND CRACK-DEPTH TO WIDTH RATIO (A/W) ON THE FRACTURE TOUGHNESS OF A533-B STEEL ; II) AN ANALYTICAL INVESTIGATION OF THE EFFECT
BULLETIN 140-1969 FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL ALUMINUM ALLOYS
BULLETIN 266-1981 WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 1: WELD SIMULATION TESTING ; WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 2: WIDE PLATE TESTING
BULLETIN 403-1995 METALLURGICAL AND FRACTURE TOUGHNESS STUDIES OF A516-70 STEEL: )METALLURGICAL CHARACTERIZATION OF THE HAZ IN A516-70 AND EVALUATION OF FRACTURE TOUGHNESS SPECIMENS ; II)COMPARISON OF THE CTOD FRACTURE
BULLETIN 130-1968 ADVANCES IN FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND IN QUANTITATIVE INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL STEELS
BULLETIN 261-1980 EFFECTS OF POROSITY ON THE FACTURE TOUGHNESS OF 5083@ 5456@ AND 6061 ALUMINUM ALLOY WELDMENTS
BULLETIN 413-1996 DEVELOPMENT OF CRITERIA FOR ASSESSMENT OF REACTOR VESSELS WITH LOW UPPER SHELF FRACTURE TOUGHNESS
BULLETIN 528- DEVELOPMENT OF MATERIAL FRACTURE TOUGHNESS RULES FOR ASME B&PV CODE SECTION VIII DIVISION 2
BULLETIN 134-1968 PROCEDURES FOR FRACTURE TOUGHNESS CHARACTERIZATION AND INTERPRETATIONS TO FAILURE-SAFE DESIGN FOR STRUCTURAL TITANIUM ALLOYS
BULLETIN 120-1967 THE PROPERTIES AND MICROSTRUCTURE OF SPRAY-QUENCHED THICK-SECTION STEELS;DETERMINATION OF FRACTURE TOUGHNESS OF HEAVY-SECTION PRESSURE VESSEL STEELS USING A FRACTURE MECHANICS APPROACH; NOTCH PROPERT
BULLETIN 157-1970 SIGNIFICANCE OF FRACTURE EXTENSION RESISTANCE (R CURVE) FACTORS IN FRACTURE-SAFE DESIGN FOR NONFRANGIBLE METALS
BULLETIN 328-1987 SPECIMEN THICKNESS EFFECTS FOR ELASTIC-PLASTIC CTOD TOUGHNESS OF AN A36 STEEL ; AN ANALYTICAL AND EXPERIMENTAL COMPARISON OF RECTANGULAR AND SQUARE CTOD FRACTURE SPECIMENS OF AN A36 STEEL

American Welding Society (AWS), Fracture toughness linear

WRC 457:2000 Fracture Toughness Master Curve Development: Fracture Toughness Of Ferritic Steels And ASTM Reference Temperature (To)
WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels
WRC 459:2001 Fracture Toughness Master Curve Development: Strategies For RPV Assessment
WRC 577:2020 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region
WRC 540:2014 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region
WRC 535:2009 Toughness, Fracture and Fitness for Hydrogen Service
WRC 345:1989 Assessing Fracture Toughness And Cracking Susceptibility Of Steel Weldments - A Review
WRC 205:1975 Fracture Toughness and Related Characteristics of the Cryogenic Nickel Steels
WRC 358:1990 The Effect Of Crack Depth To Specimen Width Ratio On The Elastic-Plastic Fracture Toughness Of A High-Strength Low-Strain Hardening Steel
WRC 375:1992 The Significance Of The a/W Ratio On Fracture Toughness Of A-36 Steel
WRC 140:1969 Fracture Toughness Characterization Procedures and Interpretations to Fracture-Safe Design for Structural Aluminum Alloys
WRC 130:1968(1976) Advances in Fracture Toughness characterization Procedures and in Quantitative Interpretations to Fracture-Safe Design for Structural Steels
WRC 261:1980 Effects of Porosity on the Facture Toughness of 5083, 5456, and 6061 Aluminum Alloy Weldments
WRC 279:1982 Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation Testing
WRC 134:1968 Procedures For Fracture Toughness Characterization and Interpretations to Failure-Safe Design for Structural Titanium Alloys
WRC 528:2010 Development Of Material Fracture Toughness Rules For ASME B&PV Code Section VIII, Division 2
WRC 266:1981 Part 1: Weldability and Fracture Toughness of 5% Ni Steel-Part 1: Weld Simulation Testing
WRC 157:1970 Significance of Fracture Extension Resistance (R Curve) Factors in Fracture-Safe Design for Nonfrangible Metals

British Standards Institution (BSI), Fracture toughness linear

PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS 7448-4:1997 Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
BS ISO 23524:2022 Plastics. Determination of fracture toughness of films and thin sheets. Essential work of fracture (EWF) method
BS ISO 13586:2000 Plastics - Determination of fracture toughness (Gic and Kic) - Linear elastic fracture mechanics (LEFM) approach
BS ISO 13586:2018 Plastics. Determination of fracture toughness (GIC and KIC). Linear elastic fracture mechanics (LEFM) approach
BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
BS ISO 27306:2010 Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
22/30389141 DC BS ISO 23524. Plastics. Determination of fracture toughness of films and thin sheets: the essential work of fracture (EWF) method
BS EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
BS EN ISO 12737:2011 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2006 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
BS ISO 17281:2002 Plastics - Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s)
BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
BS ISO 27306:2016 Tracked Changes. Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
BS ISO 26843:2015 Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
17/30290146 DC BS ISO 18485. Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
15/30293838 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
20/30394397 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2018 Tracked Changes. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS 7448-1:1991 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
BS EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
BS DD CEN/TS 14425-3:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3:Chevron notched beam (CNB) method
BS DD CEN/TS 14425-3:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fracture toughness linear

GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach
GB/T 2038-1991 Metallic materials--Standard test method for JIC,a measure of ductile fracture toughness
GB/T 42914-2023 Test method for fracture toughness of aluminum alloy products
GB/T 7732-1987 Standard test method for surface-crack fracture toughness Kle of metallie plates
GB/T 7732-2008 Metallic materials.Fracture toughness testing method with surface crack tension specimens
GB/T 23806-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam(SEPB)method
GB/T 4161-1984 Standard test method for plane-strain fracture toughness of metallic materials
GB/T 21143-2014 Metallic materials.Unified method of test for determination of quasistatic fracture toughness
GB/T 21143-2007 Metallic materials-Unified method of test for determination of quasistatic fracture toughness
GB/T 30064-2013 Metallic materials.Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
GB/T 4161-2007 Metallic materials.Determination of plane-strain fracture toughness
GB/T 41738-2022 Test method for mode I interlaminar fracture toughness(GIC) of fibre metal laminates
GB/T 31967.2-2015 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness
GB/T 28896-2023 Test method for quasi-static fracture toughness of welded joints of metallic materials
GB/T 28896-2012 Metallic materials.Method of test for the determination of quasistatic fracture toughness of welds
GB/T 41933-2022 Plastics—Determination of tension-tension fatigue crack propagation—Linear elastic fracture mechanics (LEFM) approach
GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials

International Organization for Standardization (ISO), Fracture toughness linear

ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness
ISO 13586:2018 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach
ISO 13586:2000 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) - Linear elastic fracture mechanics (LEFM) approach
ISO 23524:2022 Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
ISO 27306:2016 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
ISO 12737:1996 Metallic materials - Determination of the plane-strain fracture toughness
ISO 12737:2010 Metallic materials — Determination of plane-strain fracture toughness
ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes - Determination of the fracture toughness properties
ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO/TS 17958:2013 Paper and board - Determination of fracture toughness - Constant rate of elongation method (1,7 mm/s)
ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 26843:2015 Metallic materials - Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
ISO 17281:2002 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) at moderately high loading rates (1 m/s)
ISO 17281:2018 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
ISO 13586:2000/Amd 1:2003 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>); Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinous reinforcing fibres
ISO 15850:2014 Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach
ISO 12135:2002/Cor 1:2008 Metallic materials — Unified method of test for the determination of quasistatic fracture toughness TECHNICAL CORRIGENDUM 1
ISO 6939:1982 Textiles — Yarns from packages — Method of test for breaking strength of yarn — Skein method
ISO 6939:1988 Textiles; yarns from packages; method of test for breaking strength of yarn by the skein method

Korean Agency for Technology and Standards (KATS), Fracture toughness linear

KS M ISO 13586-2012(2022) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS M ISO 13586:2007 Plastics--Determination of fracture toughness (GIC and KIC)--Linear elastic fracture mechanics(LEFM) approach
KS L 1600-2010 Testing methods for fracture toughness of high performance ceramics
KS L 1608-2009 Testing method for fracture toughness of fine ceramics at elevated temperature
KS L 1608-2014(2019) Testing method for fracture toughness of fines ceramics at elevated temperature
KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
KS B ISO 12737-2002(2012) Metallic materials－Determination of plane－strain fracture toughness
KS M ISO 13586:2012 Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS B ISO 12737:2002 Metallic materials-Determination of plane-strain fracture toughness
KS B ISO 12737:2015 Metallic materials－Determination of plane－strain fracture toughness
KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
KS M ISO 11673:2005 Unplasticized polyvinylchloride(PVC-U) pressure pipes-Determination of the fracture toughness properties
KS M ISO 17958:2014 Paper and board — Determination of fracture toughness — Constant rate of elongation method(1.7 mm/s)
KS M ISO 11673-2005(2020) Unplasticized polyvinylchloride(PVC－U) pressure pipes－Determination of the fracture toughness properties
KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS M ISO 17281-2007(2017) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS M ISO 17281:2007 Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS M ISO 17281-2007(2022) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS K ISO 6939:2019 Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method
KS K ISO 6939:2014 Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method
KS M ISO TS 17958:2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
KS K 0410-2022 Test method for breaking strength and elongation of cords
KS L ISO 18756-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method
KS M ISO 15850-2017(2022) Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach

Professional Standard - Aviation, Fracture toughness linear

HB 5487-1991 Test method for fracture toughness of aluminum alloy
HB 5279-1984 Test method for surface crack fracture toughness of sheet metal
HB 5268-1983 Test method for fracture toughness of plexiglass sheets
HB 5142-1980 KIC test method for plane strain fracture toughness of metallic materials
HB 5142-1996 KIC test method for plane strain fracture toughness of metallic materials
HB 7718.1-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 1:Test method of mode Ⅰ interlaminar fracture toughness
HB 7718.2-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 2:Test method of mode Ⅱ interlaminar fracture toughness
HB 7572-1997 Test method for plane strain fracture toughness of metallic materials (herringbone notch)
HB 7402-1996 GIC test method for mode I interlaminar fracture toughness of carbon fiber composite laminates
HB 7403-1996 GⅡC test method for mode Ⅱ interlaminar fracture toughness of carbon fiber composite laminates

ESDU - Engineering Sciences Data Unit, Fracture toughness linear

ESDU 02016-2013 Fracture toughness (KIc) values of some cast irons
ESDU 96013-1996 Fracture toughness (KIc) values for some aluminium alloys.
ESDU 02016-2003 Fracture toughness (K sub Ic) values of some cast irons
ESDU 83023 A-1995 Fracture toughness (K sub I sub c) values of some steels.
ESDU 80036 B-1996 Introduction to the use of linear elastic fracture mechanics in estimating fatigue crack growth rates and residual strength of components.

European Committee for Standardization (CEN), Fracture toughness linear

CWA 18011:2023 Guidelines for the evaluation of the plane stress fracture toughness of advanced high strength steel sheets in the frame of fracture mechanics
EN ISO 12737:1999 Metallic Materials - Determination of Plane-Strain Fracture Toughness
EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method

American Society for Testing and Materials (ASTM), Fracture toughness linear

ASTM E399-06e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_Ic of Metallic Materials
ASTM E399-09e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-09e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness_Ic of Metallic Materials
ASTM E1820-15a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13 Standard Test Method for Measurement of Fracture Toughness
ASTM E399-05 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_IC of Metallic Materials
ASTM E399-12e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E399-12e3 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
ASTM B771-87(1997) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM B771-11(2017) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM E399-20a Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-23 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B645-21 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B645-10(2015) Standard Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B645-10 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B646-97 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-12 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B771-11e1 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM E1290-07 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM B646-04 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-03 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-06 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-17 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-19 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B771-11 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM C1421-15 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E399-06 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_Ic of Metallic Materials
ASTM E399-17 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E399-20 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_IC of Metallic Materials
ASTM E399-19 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_IC of Metallic Materials
ASTM B771-87(2001) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM E2818-11(2019) Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
ASTM B771-11(2021) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM E1290-08e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM D7779-11(2015) Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E1221-10 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E399-90(1997) Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-08 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-09 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-06e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
ASTM E1221-96 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1221-96(2002) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM C1421-16 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-18 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM B645-98 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E1221-12 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM D1294-22 Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4 mm) Gage Length
ASTM B645-02 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM E1304-97(2014) Standard Test Method for Plane-Strain &40;Chevron-Notch&41; Fracture Toughness of Metallic Materials
ASTM D1578-93(2006)e1 Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM E1221-06 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1304-97(2008) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1304-97 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1304-97(2014)e1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1304-97(2020) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM B909-17 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM D2524-22 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18 in. (3.2 mm) Gage Length
ASTM E1922-04 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E1922-04(2010)e1 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E1922-97 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
ASTM B909-21a Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM E1304-97(2002) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM F780-93a(2018) Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
ASTM D3217-01 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM D3217-95 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM D3217-01a Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM D3217/D3217M-20 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM E1922/E1922M-22 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D5045-14(2022) Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D7779-11 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM D1578-93 Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM D1578-93(2000) Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM D1578-93(2022) Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E399-12 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM D1578-93(2016) Standard Test Method for Breaking Strength of Yarn in Skein Form

国家市场监督管理总局、中国国家标准化管理委员会, Fracture toughness linear

GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method
GB/T 38769-2020 Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach

IPC - Association Connecting Electronics Industries, Fracture toughness linear

IPC TM-650 2.4.52-2013 Fracture Toughness of Resin Systmes for Base Materials

Association Francaise de Normalisation, Fracture toughness linear

NF ISO 3060:2017 Fibres de coton- Détermination de la ténacité de rupture des faisceaux plats
NF A03-180:2011 Metallic materials - Determination of plane-strain fracture toughness.
NF G07-080:1972 Method for determination of breaking tenacity of flat bundles of cotton fibers.
NF A03-183:1987 Iron and steel - Mechanics of fracture - Determination from curve J-△a of the conventional characteristic values J and dJ/da of the ductile tear strength
NF A03-180:2006 Metallic materials - Determination of plane-strain fracture toughness.
NF EN ISO 1805:2007 Filets de pêche - Détermination de la force de rupture et de la force de rupture au noeud des fils pour filets
NF EN ISO 20501:2022 Céramiques techniques - Analyse statistique de Weibull des données de résistance à la rupture
NF G07-307:1987 Textiles - Essais des fibres - Détermination de la ténacité de rupture des faisceaux de fibres de laine.
NF B38-110*NF ISO 3341:2002 Textile glass - Yarns - Determination of breaking force and breaking elongation
NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
NF EN ISO 18756:2005 Céramiques techniques - Détermination de la ténacité à la rupture des céramiques monolithiques à température ambiante par fissuration superficielle en flexion
NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF G07-002:1981 Textiles. Yarn tests. Determination of the breaking load and elongation at breaking load (tests on individual strands) Simplified method.
NF EN ISO 15732:2005 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette préfissurée sur une seule face (méthode SEPB)
NF EN ISO 2062:2010 Textiles - Fils sur enroulements - Détermination de la force de rupture et de l'allongement à la rupture des fils individuels à l'aide d'un appareil d'essai à vitesse constante d'allongement
NF ISO 6939:2016 Textiles - Fils sur enroulements - Détermination de la résistance de rupture d'un fil par la méthode de l'échevette

Military Standard of the People's Republic of China-General Armament Department, Fracture toughness linear

GJB 1483-1992 Kie test method for surface crack fracture toughness of ultra-high strength steel plates
GJB 2030A-2021 Test method for high temperature fracture toughness of metallic materials
GJB 2030-1994 JIC test method for fracture toughness of metal materials at high temperatures
GJB 586-1988 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates
GJB 586A-2021 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates

未注明发布机构, Fracture toughness linear

BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1
BS 7448-4:1997(2001) Fracture mechanics toughness tests — Part 4 : Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
DIN EN ISO 12737:1999 Metallic materials – Determination of plane-strain fracture toughness
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

American Society of Mechanical Engineers (ASME), Fracture toughness linear

ASME SEC XI D1 NMA APP G-2002 Appendix G Fracture Toughness Criteria for Protection Against Failure
ASME N-640-2001 Alternative Reference Fracture Toughness for Development of P-T Limit Curves Section XI, Division 1

Society of Automotive Engineers (SAE), Fracture toughness linear

SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
SAE AMS5867B-2015 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
SAE AMS5867C-2021 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
SAE AMS5867B-2010 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
SAE AMS5867A-2006 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed
SAE AMS5867-2000 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed
SAE AMS5867A-2001 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed UNS S41000
SAE AMS6474A-2008 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
SAE AMS6474-1996 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
SAE AMS6474-2002 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
SAE AMS6474A-2012 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
SAE AMS4931-1992 TITANIUM ALLOY BARS, FORGINGS, AND RINGS 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
SAE AMS4931F-2019 Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
SAE AMS4931G-2019 Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
SAE AMS4931C-2007 Titanium Alloy Bars, Forgings, and Rings 6Al 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
SAE AMS4335-2011 Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
SAE AMS4931E-2015 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)
SAE AMS4931D-2011 Titanium Alloy Bars, Forgings, and Rings 6Al 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
SAE AMS4335-2001 Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
SAE AMS4938A-2009 Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Transverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
SAE AMS4931B-2002 Titanium Alloy Bars, Forgings, and Rings 6Al 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness

SAE - SAE International, Fracture toughness linear

SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF
SAE AMS6474B-2018 Forgings@ Hardenable Steels and Corrosion-Resistant Steels Heat-Treated@ Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
SAE AMS5867-1992 Steel@ Corrosion and Heat Resistant@ Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness@ Annealed (UNS S41000)
SAE AMS4335A-2017 Forgings@ Aluminum Alloys 2xxx and 7xxx@ Heat-Treated@ Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
SAE AMS4931-1987 TITANIUM ALLOY BARS@ FORGINGS@ AND RINGS 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)
SAE AMS4931A-1993 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)

American National Standards Institute （ANSI), Fracture toughness linear

ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

PL-PKN, Fracture toughness linear

PN H04335-1987 Metals Test method for piane — strain fracture toughness
PN H04336-1988 Metals Test method of fracture toughness by measurement critic value J integral, Jlc

IN-BIS, Fracture toughness linear

IS 10180-1982

Japanese Industrial Standards Committee (JISC), Fracture toughness linear

JIS R 1617:1994 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS R 1617:2002 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS Z 2284:1998 Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium
JIS K 7086:1993 Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics

CZ-CSN, Fracture toughness linear

CSN 64 0623-1989 Method of testing fracture toughness f plastics Kic by plane strain
CSN 42 0347-1974 Metallic materials. Method for plane strain fracture toughness (Kic) testing.

German Institute for Standardization, Fracture toughness linear

DIN EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006); English version of DIN EN ISO 1805:2007-02
DIN EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); English version of DIN EN ISO 12737
DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
DIN VDE 0472-626:1983 Testing of cables, wires and flexible cords; breaking lenght [VDE Specification]
DIN EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
DIN 57472-626:1983 Testing of cables, wires and flexible cords; breaking lenght [VDE Specification]
DIN EN ISO 12737:2011 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010); German version EN ISO 12737:2010

CEN - European Committee for Standardization, Fracture toughness linear

EN ISO 12737:2010 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds

GB-REG, Fracture toughness linear

REG NASA-TN-D-7173-1973 Effect of specimen thickness of fatigue-crack-growth behavior and fracture toughness of 7075-T6 and 7178-T6 aluminum alloys

API - American Petroleum Institute, Fracture toughness linear

API FRACTURE TOUGHNESS OF STEEL-1985 Fracture Toughness of Steels For API Standard 620 Appendix R Tanks

Professional Standard - Military and Civilian Products, Fracture toughness linear

WJ 2430-1997 Kid test method for plane strain dynamic fracture toughness of metallic materials

Professional Standard - Machinery, Fracture toughness linear

JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material

Professional Standard - Energy, Fracture toughness linear

NB/T 20230-2013 Fracture toughness requirements for materials uesd for coolant pressure boundary of pressurized water reactor

The Aluminum Association, Fracture toughness linear

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

Professional Standard - Nuclear Industry, Fracture toughness linear

EJ/T 721-1992 Fracture Toughness Requirements of PWR Coolant Pressure Boundary Materials

RU-GOST R, Fracture toughness linear

GOST R 57994-2017 Polymer composites. Test methods for fracture toughness definition and energy release speeds
GOST 23364-2001 Synthetic textured threads. Method for determination of breaking strength and breaking elongation
GOST 23364-1978 Synthetic textured threads and tow. Methods for the determination of the breaking strength and breaking elongation
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST 3274.1-1972 Cotton fibre. Methods for determination of breaking load and linear density
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST 28073-1989 Sewing articles. Methods for the determination of breaking load, elongation of thread seams, slippage of fibre trends in seams
GOST 34256-2017 Plastics. Determination of propagation of fatigue crack in tension by the method of linear elastic fracture mechanics (LEFM)
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC

PK-PSQCA, Fracture toughness linear

PS 595-1983 PAKISTAN STANDARD METHOD FOR DETERMINA-TION OF BREAKING LOAD, ELONGATION AT BREAK AND TENACITY OF JUTE YARNS. (1st Revision)

YU-JUS, Fracture toughness linear

JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)
JUS C.A4.083-1995 Mechanical testing of metals - Elementary concepts and properties relating to fractrure testing
JUS N.C0.071-1980 Testing offlexible cords and cables. Tear resistance

Danish Standards Foundation, Fracture toughness linear

DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS 926:1955 Textile testing. Determination of breaking load and elongation at break of yarn. Tensile test
DS/EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
DS/EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method

ES-UNE, Fracture toughness linear

UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)

National Aeronautics and Space Administration (NASA), Fracture toughness linear

NASA-TM-X-3316-1975 An investigation of fracture toughness, fatigue-crack growth, sustained-load flaw growth, and impact properties of three pressure vessel steels

IT-UNI, Fracture toughness linear

Lithuanian Standards Office , Fracture toughness linear

LST EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)

AENOR, Fracture toughness linear

UNE-EN ISO 15653:2011 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
UNE 40247-2:1974 IN COTTON FIBRES. DESCRIPTION AND WAY OF USING THE DYNAMOMETRE PRESSLEY TO DETERMINE THE BREAKING TENACITY OF FLAT BUNDLES.

KR-KS, Fracture toughness linear

KS K ISO 6939-2019 Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method
KS M ISO TS 17958-2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
KS M ISO 15850-2017 Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach

VN-TCVN, Fracture toughness linear

TCVN 5787-1994 Textiles.Determination of breaking strength of yarn by the skein method

ZA-SANS, Fracture toughness linear

SANS 5326:2007 Skein strength and tenacity, and linear density of spun textile yarns on packages

AASHTO - American Association of State Highway and Transportation Officials, Fracture toughness linear

TP 124-2018 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Flexibility Index Test (FIT)

Canadian General Standards Board （CGSB), Fracture toughness linear

CAN/CGSB-4.2 NO.9.5-M89-1989 Textile test methods Breaking strength of yarns - Skein method
CAN/CGSB-4.2 NO.9.4-M91-1991 Textile test methods Breaking strength of yarns - Single strand method

European Association of Aerospace Industries, Fracture toughness linear

AECMA PREN 6033-1995 Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode I - GIc Edition P1
AECMA PREN 6034-1995 Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode II - GIIc Edition P1