ZH
RU
ES

three standard deviations

three standard deviations, Total:473 items.

In the international standard classification, three standard deviations involves: Quality, Air quality, Road vehicles in general, Test conditions and procedures in general, Products of the chemical industry, Optics and optical measurements, Lighting, Telecommunication systems, Textile fibres, Products of the textile industry, Farming and forestry, Inorganic chemicals, Non-ferrous metals, Bottles. Pots. Jars, Iron and steel products, Road vehicle systems, Hospital equipment, Petroleum, petroleum products and natural gas handling equipment, Machine tools, Metrology and measurement in general, Applications of information technology, Organic chemicals, Linear and angular measurements, Astronomy. Geodesy. Geography, Meat, meat products and other animal produce, Laboratory medicine, Galvanic cells and batteries, Optoelectronics. Laser equipment, Audio, video and audiovisual engineering, Products of non-ferrous metals, Rotating machinery, Flexible drives and transmissions, Thermodynamics and temperature measurements, Acoustics and acoustic measurements, Solar energy engineering, Information sciences. Publishing, Corrosion of metals, Road engineering, Sterilization and disinfection, Installations in buildings, Pharmaceutics, Valves, Medical sciences and health care facilities in general, Analytical chemistry, Rubber and plastics products, Water quality, Vocabularies, Food products in general, Computer graphics, Education, Wastes, Screw threads, Construction materials, Nuclear energy engineering, Aerospace electric equipment and systems, Protection against fire, Construction industry, Terminology (principles and coordination), Civil engineering in general, Tyres, Cutting tools, Technical drawings, Standardization. General rules, Electrical accessories, Equipment for the chemical industry.

AENOR, three standard deviations

UNE 66053:1978 ESTIMATION OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT
UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
UNE 66055:1982 COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
UNE 66056:1978 ESTIMATION OF THE RATIO OF TWO VARIANCES OR OF TWO STANDARD DEVIATIONS

Korean Agency for Technology and Standards (KATS), three standard deviations

KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS Q 1001-2005(2011) Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2017 Standard tolerances for knit goods
KS K 0042-1975 Standard tolerances for knit goods
KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS K 0042-2011 Standard tolerances for knit goods
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3253-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3254-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3255-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS K 0042-2022 Standard specification for tolerances for knitted fabrics
KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
KS Q 1001-2005 Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
KS C 8537-2005 Secondary reference crystalline solar cells
KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS M ISO 4184:2002 Belt drives－Classical and narrow V－belts－Lengths in datum system
KS A 3262-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3262-1986 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3256-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3259-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B 0507-1975(2011) Roughness Comparison Specimens
KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3260-2002 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS A 3261-2002 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATIONUNKNOWN)
KS A 3260-1986 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, three standard deviations

GB 16236-1996 Health standard for cyclonite(RDX)in the of workplace
GB 16191-1996 Health standard for trifluoromethyl hypofluorite in the air of workplace
GB 1800-1979 Tolerance and fitting,generalities,standard tolerances and basic deviations
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB 15979-2002 Hygienic standard for disposable sanitary products
GB 15980-1995 Hygienic standard of disinfection for single use medical products
GB/T 18916.3-2012(英文版) Norm of water intake—Part 3: Petroleum refining
GB 28233-2011 Safety and hygienic standard for disinfection by sodium hypochlorite generator
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
GB/T 8054-2008 Single sampling procedures and tables for inspection having desired operating characteristics by variables

Taiwan Provincial Standard of the People's Republic of China, three standard deviations

CNS 10799-1984 Three-Dimensional Refrence System for Automobiles
CNS 8461-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown One - Sided)
CNS 8460-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two - Sided)
CNS 8462-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown ,Two -Sided)
CNS 8459-1983 Significance Test of Difference Between the Population Mean and the Standart (Standard Deviation Known ,One - Sided)
CNS 8550-1983 Significance Test of Differencece Between the Two Population Means(Standard Deviations Known, Two - Sided)
CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
CNS 8549-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations, Known, One-Side)
CNS 8746-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, Two-Sided)
CNS 8745-1983 Significance Test of Difference Between the Two Population Means(Standard Deviations Unknown, One-Sided)
CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)
CNS 13491-1995 Numbering of Divisions and Subdivision in Written Documents
CNS 5663-1986 Test Code for Accuracy of Three-Side Planers and Moulders
CNS 3-14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 3.14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 13221-1993 Methods of Indicating Conformity with Standards for Third - Party Certification Systems

American Society for Testing and Materials (ASTM), three standard deviations

ASTM D6617-17 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D4954-89(2009) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM F2469-10 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-03 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E1229-21 Standard Specification for Calcium Hypochlorite
ASTM B494/B494M-08(2020) Standard Specification for Primary Zirconium
ASTM E1229-93(2002) Standard Specification for Calcium Hypochlorite
ASTM E1229-08 Standard Specification for Calcium Hypochlorite
ASTM E1229-93(1997) Standard Specification for Calcium Hypochlorite
ASTM E1229-16 Standard Specification for Calcium Hypochlorite
ASTM D7198-05(2018) Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM F78-97 Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
ASTM D7198-05(2023) Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM E122-99 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
ASTM E122-00 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
ASTM E122-17(2017) Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
ASTM D5248-04(2010) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM E1046-85(2000)e1 Standard Specification for Glass Westergren Tube, Disposable
ASTM E1046-85(1996) Standard Specification for Glass Westergren Tube, Disposable
ASTM E1046-85(2021) Standard Specification for Glass Westergren Tube, Disposable
ASTM E1362-10 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM D5248-96(2000) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-04 Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-96 Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D3444-00(2020) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D5248-04(2015) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-04(2020) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D3444-00(2015) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM F2717-14(2019) Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1362-99 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E1781-98 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E1781-98(2003)e1 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E1781/E1781M-19 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E1781/E1781M-20 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E890-94(1998) Standard Specification for Disposable Glass Culture Tubes
ASTM D7198-05 Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM E714-94(1998) Standard Specification for Disposable Glass Serological Pipets
ASTM D7198-05(2012) Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM G158-98(2004) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM D3443-00(2005) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00(2010) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3444-00(2010)e1 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3448-85(2000) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2020) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2015) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
ASTM E2164-08 Standard Test Method for Directional Difference Test
ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D3444-00 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2005) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E672-87(2019)e1 Standard Specification for Disposable Glass Micropipets
ASTM E890-94(2015) Standard Specification for Disposable Glass Culture Tubes
ASTM E732-80(2011) Standard Specification for Disposable Pasteur-Type Pipet
ASTM E890-94(2021) Standard Specification for Disposable Glass Culture Tubes
ASTM E1046-85(2015) Standard Specification for Glass Westergren Tube, Disposable
ASTM D3595-97 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM E2544-07 Standard Terminology for Three-Dimensional (3-D) Imaging Systems
ASTM E2544-07a Standard Terminology for Three-Dimensional (3-D) Imaging Systems
ASTM D5616-00 Standard Specification for Reclaimed Trichloroethylene
ASTM A1-00 Standard Specification for Carbon Steel Tee Rails
ASTM D5616-04 Standard Specification for Reclaimed Trichloroethylene
ASTM E1750-95 Standard Guide for Use of Water Triple Point Cells
ASTM D5616-04(2010) Standard Specification for Reclaimed Trichloroethylene
ASTM D3595-14(2019) Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM E2544-11a Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM D5616-04(2022) Standard Specification for Reclaimed Trichloroethylene
ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
ASTM E1750-02 Standard Guide for Use of Water Triple Point Cells
ASTM E1750-09 Standard Guide for Use of Water Triple Point Cells
ASTM E1750-10 Standard Guide for Use of Water Triple Point Cells
ASTM D5616-04(2016) Standard Specification for Reclaimed Trichloroethylene
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
ASTM E2164-16 Standard Test Method for Directional Difference Test
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E1781-08 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E1106-07 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
ASTM D3443-00(2010)e1 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM D2616-12 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM E934-94(2004) Standard Specification for Serological Pipet, Disposable Plastic
ASTM E732-80(2001)e1 Standard Specification for Disposable Pasteur-Type Pipet
ASTM E732-80(1996) Standard Specification for Disposable Pasteur-Type Pipet
ASTM E732-80(2006) Standard Specification for Disposable Pasteur-Type Pipet
ASTM C1405-08 Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM C1689-08a Standard Practice for Subsampling of Uranium Hexafluoride
ASTM E934-94(1998) Standard Specification for Serological Pipet, Disposable Plastic
ASTM E672-87(2011) Standard Specification for Disposable Glass Micropipets
ASTM E934-94(2021) Standard Specification for Serological Pipet, Disposable Plastic
ASTM E732-80(2018) Standard Specification for Disposable Pasteur-Type Pipet
ASTM E714-94(2009) Standard Specification for Disposable Glass Serological Pipets
ASTM E2544-09 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-09a Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-09b Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-08 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-08a Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-08b Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM D6126-11 Standard Specification for HFC-23 (Trifluoromethane, CHF₃)
ASTM D5632-95 Standard Specification for Halon 1301, Bromotrifluoromethane (CF₃Br)
ASTM D5632-01 Standard Specification for Halon 1301, Bromotrifluoromethane (CF₃Br)
ASTM E2544-10 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-11a(2019) Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-11 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E1750-10(2016) Standard Guide for Use of Water Triple Point Cells
ASTM E2544-11A(2019)e1 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM D6126/D6126M-11e1 Standard Specification for HFC-23 (Trifluoromethane, CHF₃)
ASTM D6126/D6126M-11(2015) Standard Specification for HFC-23 (Trifluoromethane, CHF3)
ASTM D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D1464-90(2002) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM D1464-07 Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM E1684-00 Standard Specification for Miniature Thermocouple Connectors
ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D1464-12 Standard Practice for Differential Dyeing Behavior of Cotton
ASTM E2164-01 Standard Test Method for Directional Difference Test
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E1047-85(2000)e1 Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
ASTM E1047-85(1996) Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
ASTM E1092-91(1996) Standard Specification for Glass Micro Folin Pipet, Disposable
ASTM C1405-05 Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM C1405-05a Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM C1405-04 Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
ASTM C1405-07 Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM C1405-01 Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
ASTM C1405-01a Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
ASTM C1405-01b Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
ASTM C1405-00a Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
ASTM C1405-02 Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
ASTM E714-94(2004) Standard Specification for Disposable Glass Serological Pipets
ASTM E1092-91(2000)e1 Standard Specification for Glass Micro Folin Pipet, Disposable
ASTM E1092-91(2022) Standard Specification for Glass Micro Folin Pipet, Disposable
ASTM E787-81(2017) Standard Specification for Disposable Glass Micro Blood Collection Pipets
ASTM E714-94(2015) Standard Specification for Disposable Glass Serological Pipets
ASTM E934-94(2015) Standard Specification for Serological Pipet, Disposable Plastic
ASTM E714-94(2021) Standard Specification for Disposable Glass Serological Pipets
ASTM C1405-15 Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM C1405-16 Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM E1092-91(2016) Standard Specification for Glass Micro Folin Pipet, Disposable

GM North America, three standard deviations

GM 9985036-1980 Oil Differential (Standard)
GM 9985055-1980 Oil Differential (Standard) SAE 80
GM 9985154-1996 Lubricant - Hypoid Gear, Standard Differential
GM 9985044-1996 Lubricant, Hypoid Gear, Standard Differential, 80W

IT-UNI, three standard deviations

PH-BPS, three standard deviations

PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

British Standards Institution (BSI), three standard deviations

BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
PD CEN/TR 17982:2023 European Digital Identity Wallets standards Gap Analysis
EP 400-2000 BSI Catalogue 2002 (CD-ROM) (one-off version)

Japanese Industrial Standards Committee (JISC), three standard deviations

JIS Z 9010:1979 Sequential sampling inspection plans for percent defectives having desired operating characteristics by variables (standard deviation known)
JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9003:1979 Single sampling inspection plans having desired operation characteristics by variables (standard deviation known)
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
JIS Z 9009:1962 Sequential sampling inspection plans having desired operating characteristics by attributes
JIS C 8932:1995 Secondary reference amorphous solar submodules
JIS Z 9004:1983 Single sampling inspection plans having desired operating characteristics by variables (standard deviation unknown and single limit specified)
JIS C 8911:1989 Secondary reference crystalline solar cells

Yunnan Provincial Standard of the People's Republic of China, three standard deviations

DB53/ 055.4-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng flower quality standard
DB53/ 055.3-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng seedling quality standard
DB53/ 055.1-1999 Quality Standard for Sanqi of Wenshan
DB53/ 055.8-1999 Wenshan Notoginseng Comprehensive Standard Notoginseng Pesticide Use Guidelines
DB53/ 055.6-1999 Quality Standard of Raw Sanqi Power
DB53/ 055.2-1999 Quality Standard of Sanqi Seed
DB53/ 055.5-1999 Quality Standard of Sanqi stem and leaf
DB53/ 055.7-1999 Quality Standard of Sanqi Section
DB53/T 055.14-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng flower processing regulations
DB53/T 055.9-1999 Wenshan Panax notoginseng Comprehensive Standard Panax notoginseng Seedling Technical Specification
DB53/T 055.10-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng cultivation technical specification
DB53/T 055.13-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng stem and leaf processing regulations
DB53/T 055.12-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng primary product processing rules

TH-TISI, three standard deviations

TIS 225-1999 Standard for hypochlorite
TIS 811-1988 Standard for automotive v-belts
TIS 872-1989 Standard for throwaway type oil filters for automobile
TIS 569-1985 Standard for sodium tripolyphosphate for industrial use
TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs

Association Francaise de Normalisation, three standard deviations

NF X06-060:1987 Applications de la statistique - Estimation d'une variance - (d'un écart-type).
NF E04-008:2021 Geometrical Product Specifications (GPS) - Tolerance allocation method, indications and acceptance criteria - Methods based on arithmetics, quadratic, semi-quadratic and inertial statistics
NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
NF X06-061:1987 Applications de la statistique - Comparaison d'une variance (d'un écart-type) à une valeur donnée
NF X06-062:1987 Applications de la statistique - Estimation du rapport de deux variances - (deux écarts-types).
NF EN ISO 12818:2015 Emballages en verre - Tolérances standard pour flaconnage
CWA 15236:2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
NF Z01-001*NF EN 16341:2012 Selection of standards and standard-like documents for defence products and services - Order of preference
NF E75-079:1987 COATED ABRASIVE PRODUCTS. DIMENSIONAL TOLERANCES ON NON-STANDARD CONVERSIONS.
NF P97-401:1977 Lighting columns. Dimensions and tolerances.

Professional Standard - Post and Telecommunication, three standard deviations

YD/T 673-1994 Quality grading criteria of third order digital multiplex equipment operating at 34368 kbit/s and using positive justification

Professional Standard - Agriculture, three standard deviations

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
872兽药典一部-2015 Appendix Catalog 8062 Standards and Reference Standards
GBJ 4-1973 Industrial "three wastes" emission standards
131兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard sodium hypochlorite solution
1188兽药质量标准2017年版 Chinese Medicine Volume 1 Veterinary Drug Quality Standard Herbs and Decoction Pieces
农业部1759号公告-83-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhuang Likang Powder
农业部1759号公告-85-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhuang Shuangding Powder
农业部1759号公告-84-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhuang Shuangding Tablets
113兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard compound calcium hypochlorite powder
129兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard trichloroisocyanuric acid, trisodium phosphate powder (for silkworm)
农业部1759号公告-86-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Chinese Medicine Sanhuangweng Oral Liquid
农业部1759号公告-82-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhua Angelica Perfusion Solution
838兽药典二部-2015 Appendix Contents 8000 Reagents and Standard Materials 8003 Test Paper
873兽药典一部-2015 Appendix catalog 8062 standard substance and reference substance
836兽药典二部-2015 Appendix Contents 8000 Reagents and Standard Materials 8001 Reagents
867兽药典一部-2015 Appendix Contents 8000 Reagents and Standard Materials 8002 Test Solution
866兽药典一部-2015 Appendix Contents 8000 Reagents and Standard Materials 8001 Reagents
837兽药典二部-2015 Appendix Contents 8000 Reagents and Standard Materials 8002 Test Solution
868兽药典一部-2015 Appendix Contents 8000 Reagents and Standard Materials 8003 Test Paper

HU-MSZT, three standard deviations

ES-UNE, three standard deviations

UNE 66055:1983 ERRATUM COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
UNE 149002:2022 Acceptance criteria for disposable products via toilet.

CZ-CSN, three standard deviations

CSN ON 56 3052-1964
CSN ON 56 3028-1964
CSN 42 8387-1961 Platinum and platinum alloys sheets. Dimensional standard
CSN 42 8405-1983 Hot rolled copper wire
CSN 01 4203 Za-1990

API - American Petroleum Institute, three standard deviations

API STD 6-1927 RIG IRON STANDARDS (Third Edition)
API THIRD PARTY NETWORK-2007 Standard for Third Party Network Connectivity
API STD 1104-1955 STANDARD FOR FIELD WELDING OF PIPE LINES (Third Edition)

BR-ABNT, three standard deviations

U.S. Air Force, three standard deviations

AIR FORCE DI-TMSS-81641-2003 ALLOWANCE STANDARD CODE (ASC) UPDATE PACKAGE
AIR FORCE FIPS-PUB-185-1994 ESCROWED ENCRYPTION STANDARD (EES)

European Committee for Standardization (CEN), three standard deviations

EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
CWA 15236-2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
CEN/TR 17982:2023 European Digital Identity Wallets standards Gap Analysis

Society of Automotive Engineers (SAE), three standard deviations

SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE AMS2204G-1994 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204E-1983 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204D-1973 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204F-2011 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AS1035D-1993 TEE, STANDARD AND REDUCER, FLARED TUBE
SAE MAM2204A-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204-1983 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE AS1035E-2007 FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1035C-2001 FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1035G-2020 FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial
SAE AMS2204C-1966 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204A-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

PL-PKN, three standard deviations

PN M02155-1989 Round screw threads Tolerances for gauges
PN M02141-1986 Height and deph limit gauges Tolerances
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges

SAE - SAE International, three standard deviations

SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE AMS2204H-1996 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1989 Tolerances Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1989 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE MAM2204C-1996 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE AMS2204B-1964 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

RO-ASRO, three standard deviations

STAS 6725-1968

UNKNOWN, three standard deviations

SH 0552-1993(合订本)

AASHTO - American Association of State Highway and Transportation Officials, three standard deviations

PS-1996 AASHTO Provisional Standards (Third Edition)

Professional Standard - Petrochemical Industry, three standard deviations

SH 0552~0564-1993 Petroleum Product Standard 1993 (3)

Group Standards of the People's Republic of China, three standard deviations

T/WLJC 110-2022 Designof three-dimensional for Machine tool products General principles of tolerance dimensioning
T/CIECCPA 009-2022 Echelon lithium-ion battery usage standards
T/SCQA 211-2021 Standard for urban road level difference planning and design
T/SHDSGY 084-2022 Secondary water supply standardized pump house construction code
T/CARDTCM 008-2022 Standards for the use of disposable hook needles
T/HAEC 004-2022 Third-party inspection service standards
T/GZEIIA 1001-2023 Three Classroom Software and Hardware Construction Standards
T/ZJGFTR 001-2021 Regenerated copper nitrate trihydrate product standard
T/CAB CSISA 0001-2018 Standardization third party evaluation—Basic terminology
T/CECS G：H11-02-2022 Real Scene Three-Dimensional Surveying Standard in Highway Reconnaissance

SE-SIS, three standard deviations

SIS SMS 1486-1950
SIS SMS 1357-1950
SIS SMS 1488-1950
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SMS 1338-1950

CU-NC, three standard deviations

NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances

International Organization for Standardization (ISO), three standard deviations

ISO 9058:2008 Glass containers - Standard tolerances for bottles
ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage
ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions

RU-GOST R, three standard deviations

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions

AIAG - Automotive Industry Action Group, three standard deviations

B-9-2004 Gas Cylinder Identification Label Standard (Version 3)
B-2-2007 Vehicle Identification Number (VIN) Label Application Standard (Version 3)

American National Standards Institute （ANSI), three standard deviations

ANSI/HL7 V3 RIM, R 1-2003 HL7 Version 3 Standard: Reference Information Model, Release 1
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI/HL7 V3 SC, R 1-2003 HL7 Version 3 Standard: Scheduling, Release 1
ANSI/FCI 97-1-2013 Standard for Production Testing of Secondary Pressure Drainers
ANSI C18.3M Part 2-2011 Portable Lithium Primary Cells and Batteries - Safety Standard
ANSI/HL7 V3 PM, R 1-2005 HL7 Version 3 Standard: Personnel Management, Release 1
ANSI/HL7 V3 IZ, R 1-2013 HL7 Version 3 Standard: Immunization Messaging, Release 1

Professional Standard - Surveying and Mapping, three standard deviations

CH 8004-1991 Standard metallic scale (Grade Ⅲ)

National Metrological Verification Regulations of the People's Republic of China, three standard deviations

JJG 71-2005 Standard Metallic Scale (Grade Ⅲ)
JJG 59-1990 Standard Piston Gauge (Grade Ⅱ& Ⅲ)

Underwriters Laboratories (UL), three standard deviations

UL 248W BULLETIN-2006 UL harmonized trinational set of standards
UL 1175-1999 UL Standard for Safety Buoyant Cushions (Third Edition)
UL 998-1993 UL Standard for Safety Humidifiers (Third Edition)
UL 1004-4-2018 UL Standard for Safety Electric Generators (Third Edition)
UL 1769-2003 UL Standard for Safety Cylinder Valves (Third Edition)
UL 147A-2005 UL Standard for Safety Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies (Third Edition; Reprint with Revisions Through and Including September 25@ 2013)
UL 497A BULLETIN-2007 UL Standard for Safety Secondary Protectors for Communication Circuits

IX-FAO, three standard deviations

CODEX STAN 3-1995 Codex standard for canned salmon

German Institute for Standardization, three standard deviations

DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988

Professional Standard - Electron, three standard deviations

SJ/T 9507-1993 Grading standard of quality for television transposer

国家市场监督管理总局、中国国家标准化管理委员会, three standard deviations

GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage

Danish Standards Foundation, three standard deviations

DS/EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/ISO 4184:1982 Classical and narrow V-belts. Lengths

Lithuanian Standards Office , three standard deviations

LST EN 15904-2011 Glass packaging - Standard tolerances for flaconnage

Professional Standard - Machinery, three standard deviations

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations

Canadian Standards Association (CSA), three standard deviations

CAN/CSA-A123.21-2014 Standard test method for the dynamic wind uplift resistance of membraneroofing systems (Third Edition; Update No. 1: May 2015)

CN-STDBOOK, three standard deviations

图书 A-4647 Food Standards and Regulations (Third Edition)
图书 3-9065 Chemical Industry Standard Compilation of Rubber Raw Materials (3) (Third Edition)
图书 3-9848 Compilation of Textile Machinery Standards (Volume Three)

International Telecommunication Union (ITU), three standard deviations

ITU-T G.826-1993 (WITHDRAWN) Error Performance Parameters and Objectives for International, Constant Bit Rate Digital Paths at or Above the Primary Rate - Digital Networks (Study Group 13) 18 pp

Professional Standard - Military and Civilian Products, three standard deviations

WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)

中华人民共和国国家卫生和计划生育委员会, three standard deviations

GB 18065-2000 Hygienic standard for triethylamine in water sources

BE-NBN, three standard deviations

NBN 492-1958

Hainan Provincial Standard of the People's Republic of China, three standard deviations

DB46/ 118-2008 Hygienic standard for raw-eaten aquatic products of Salmon and Lobster

Institute of Electrical and Electronics Engineers (IEEE), three standard deviations

IEEE 1857.10-2021 IEEE Standard for Third-Generation Video Coding
IEEE PC57.12.44/D10, Novemer 2013 IEEE Approved Draft Standard Requirements for Secondary Network Protectors
IEEE P1857.10/D4, August 2021 IEEE Approved Draft Standard for Third Generation Video Coding
ST 2066:2012 ST 2066:2012 - SMPTE Standard - Disparity Map Representation for Stereoscopic 3D

Professional Standard - Light Industry, three standard deviations

QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes

International Commission on Illumination (CIE), three standard deviations

CIE X019-2001 Proceedings of Three CIE Workshops on Criteria for Road Lighting

NL-NEN, three standard deviations

NEN 2890-1990 Derivation of target sizes from modular sizes of building elements

Aerospace, Security and Defence Industries Association of Europe (ASD), three standard deviations

ASD-STAN PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)

Professional Standard - Construction Industry, three standard deviations

JGJ 35-1987(第三部分) Standard for parameter of construction atmosphere (Part 3)

Yunnan Provincial Food Standard of the People's Republic of China, three standard deviations

DBS53/ 029-2020 Food safety local standard Panax notoginseng fibrous root

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., three standard deviations

IEEE PC57.13.7/D7-2016 Draft Standard for Draft Standard for Current Transformers with Maximu mA Secondary Current of 250mA

Standard Association of Australia （SAA）, three standard deviations

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

ES-AENOR, three standard deviations

UNE 25 016

KR-KS, three standard deviations

KS K 0046-2017(2022) Standard tolerances for yarns spun on the cotton or worsted systems

Canadian General Standards Board （CGSB), three standard deviations

CGSB 3.6-2000-CAN/CGSB-2000 Regular Sulphur Diesel Fuel

VN-TCVN, three standard deviations

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

AT-ON, three standard deviations

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts

Professional Standard - Chemical Industry, three standard deviations

HG/T 21548-1993 Standard series of suction dredges in radial secondary settling ponds
HG/T 21548-1993（编制说明） Standard series of radial flow secondary sedimentation tank suction dredger

Anhui Provincial Standard of the People's Republic of China, three standard deviations

DB3401/T 229-2021 Standardized pump room construction specification for residential secondary water supply
DB3416/T 008-2022 Secondary water supply standardized pump room installation technical guidelines