ZH
RU
ES
Ultra-high molecular weight polyethylene molecular weight test method
Ultra-high molecular weight polyethylene molecular weight test method, Total:332 items.
In the international standard classification, Ultra-high molecular weight polyethylene molecular weight test method involves: Products of the textile industry, Textile fibres, Rubber and plastics products, Reinforced plastics, Plastics, Installations in buildings, Mining equipment, Fishing and fish breeding, Medical equipment, Equipment for the chemical industry, Continuous handling equipment, Storage equipment, Bridge construction, Thermodynamics and temperature measurements, Physics. Chemistry, Protection against dangerous goods, Analytical chemistry, Fluid power systems, Raw materials for rubber and plastics, Equipment for petroleum and natural gas industries, Components and accessories for telecommunications equipment, Organic chemicals, Rubber, Electrical wires and cables, Products of the chemical industry, Non-destructive testing, Insulating materials.
Professional Standard - Textile, Ultra-high molecular weight polyethylene molecular weight test method
Professional Standard - Light Industry, Ultra-high molecular weight polyethylene molecular weight test method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultra-high molecular weight polyethylene molecular weight test method
- GB/T 29554-2013 Ultra high molecular weight polyethylene fibre
- GB/T 32679-2016 Ultra-high-molecular-weight polyethylene (PE-UHMW) resin
- GB/T 19701.1-2005 Implants for surgery-Ultra-high molecular weight polyethylene part 1:Powder form
- GB/T 19701.1-2016 Implants for surgery.Ultra-high-molecular-weight polyethylene.Part 1:Powder form
- GB/T 19701.2-2005 Implants for surgery Ultra-high molecular weight polyethylene-part 2:Moulded forms
- GB/T 19701.2-2016 Implants for surgery.Ultra-high-molecular-weight polyethylene.Part 2: Moulded forms
- GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene.High performance size-exclusion chromatography
- GB/T 30668-2014 Ultra high molecular weight polyethylene fibre 8-strand braided ropes, 12-strand braided ropes and covered ropes
- GB/T 21461.2-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
- GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
- GB/T 21461.1-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 1:Designation system and basis for specifications
- GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
- GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
- GB/T 12688.3-2011 Test method of styrene for industrial use—Part 3:Determination of content of polymer
- GB/T 11327.1-1999 Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods
- GB/T 2951.41-2008 Common test method for insulating and sheathing materials of electric and optical cables.Part 41:Methods specific to polyethylene and polypropylene compounds.Resistance to environmental stress cracking.Measurement of the melt flow index.Carbon black and/o
- GB/T 6509-2005 Testing method for determination of low molecular weight compounds content in chip and fibres of polycaproamide
Henan Provincial Standard of the People's Republic of China, Ultra-high molecular weight polyethylene molecular weight test method
国家能源局, Ultra-high molecular weight polyethylene molecular weight test method
- SH/T 1818-2017 Test method for abrasion of plastic ultra-high molecular weight polyethylene mortar
Professional Standard - Urban Construction, Ultra-high molecular weight polyethylene molecular weight test method
- CJ/T 320-2009 UItrahigh molecular weight polyethylene composite pipe
- CJ/T 427-2013 Ultra-high molecular weight polyethylene sheet composite pipe
- CJ/T 323-2015 Steel wire reinforced ultra-high molecular weight polyethylene composite pipe
Group Standards of the People's Republic of China, Ultra-high molecular weight polyethylene molecular weight test method
- T/FSI 035-2019 Ultra-high molecular weight polytetrafluoroethylene resin
- T/HEBQIA 056-2022 Ultra High Molecular Weight Polyethylene (UHMW-PE) Roller
- T/ZZB 3122-2023 Coloured ultra-high molecular weight polyethylene （UHMWPE）filament yarns
- T/CPCIF 0059-2020 Ultra-high molecular weight polyethylene for fiber spinning
- T/ZZB 1957-2020 Low line density ultra-high molecular weight polyethylene filament yarns
- T/CPCIF 0060-2020 Ultra-high molecular weight polyethylene (PE-UHMW) and high-density polyethylene (PE-HD) for wet process lithium ion battery separator
- T/CPCIF 0046-2020 Steel-lined ultrahigh molecular weight polyethylene pipe for metal mines
- T/QGCML 1337-2023 Ultra-high molecular weight polyethylene anti-static sintered plate filter element
- T/SHXCL 0017-2022 Ultra-high-molecular-weight polyethylene (PE-UHMW) resin for joint replacements
- T/ZZB 1184-2019 Ultra high molecular weight polyethylene fiber rope for offshore lifting
- T/CAMDI 079-2022 Standard guide for extensively irradiation-crosslinked ultra-high molecular weight polyethylene fabricated form for surgical implant applications
- T/SHXCL 0005-2020 Technical specification for green-design product evaluation— Ultra-high-molecular-weight polyethylene(PE-UHMW) resin
- T/CSCA 110049-2020 “Shanghai Brand”certification criteria: Ultra-high-molecular-weight polyethylene resin for spinning
- T/FSI 052-2020 Method for Determination of Molecular Weight of Methyl Vinyl Silicone Rubber - Mooney Viscosity Method
农业农村部, Ultra-high molecular weight polyethylene molecular weight test method
- SC/T 5022-2017 Ultra high molecular weight polyethylene mesh warp knitted type
- SC/T 4049-2019 Ultra-high molecular weight polyethylene mesh twisted type
- SC/T 4046-2019 General technical conditions for fishing ultra-high molecular weight polyethylene mesh lines
British Standards Institution (BSI), Ultra-high molecular weight polyethylene molecular weight test method
- BS ISO 5834-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Oxidation index measurement method
- BS EN ISO 15527:2013 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
- BS ISO 5834-5:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Morphology assessment method
- BS ISO 5834-3:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Accelerated ageing methods
- BS ISO 5834-1:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Powder form
- BS ISO 5834-2:2009 Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
- BS ISO 5834-2:2011 Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
- BS ISO 5834-1:2019 Implants for surgery. Ultra-high-molecular-weight polyethylene - Powder form
- BS ISO 5834-4:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Oxidation index measurement method
- BS ISO 5834-3:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Accelerated ageing methods
- BS ISO 5834-5:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Morphology assessment method
- BS EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS ISO 5834-2:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
- BS EN ISO 21304-2:2021 Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
- BS EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Designation system and basis for specifications
- 19/30387275 DC BS EN ISO 21304-2. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
- BS EN ISO 21304-1:2019 Tracked Changes. Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Designation system and basis for specifications
- BS EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
- BS EN 12582:1999(2009) Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
- BS ISO 4765:2022 Chemically-induced ultraweak photon emission (UPE). Measurement as an analysis method of degradation of polymeric material
Professional Standard - Medicine, Ultra-high molecular weight polyethylene molecular weight test method
- YY/T 1430-2016 Standard test method for small punch testing of ultra-high molecular weight polyethylene used in surgical implants
- YY/T 0772.4-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 4:Oxidation index measurement method
- YY/T 0772.4-2022 Surgical Implants Ultra High Molecular Weight Polyethylene Part 4: Oxidation Index Test Method
- YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene( UHMWPE)
- YY/T 0772.3-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 3:Accelerated ageing methods
- YY/T 0772.5-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 5:Morphology assessment method
- YY/T 1431-2016 Implants for surgery.Medical-grade ultra-high molecular weight polyethylene yarns
- YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry
- YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical
implants by infrared spectroscopy
- YY/T 0811-2010 Standard guide for extensively irradiation.Crosslinked ultra-high molecular weight polyethylene fabricated forms for surgical implant applications
- YY/T 1507.4-2016 Determination the content of impurity element in the implant for surgery ultra-high molecular weight polyethylene powder.Part 4:Determination of aluminum by ICP-MS
Hubei Provincial Standard of the People's Republic of China, Ultra-high molecular weight polyethylene molecular weight test method
工业和信息化部, Ultra-high molecular weight polyethylene molecular weight test method
- HG/T 5629-2019 Ultra-high molecular weight polyethylene lining board for chemical industry
- HG/T 5225-2017 Antistatic halogen-free flame retardant ultra-high molecular weight polyethylene pipe lining special material
- HG/T 6046-2022 General requirements for wear-resistant products made of injection molding grade ultra-high molecular weight polyethylene resin
- SH/T 1826-2019 Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)
CEN - European Committee for Standardization, Ultra-high molecular weight polyethylene molecular weight test method
- EN ISO 15527:2018 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW@ PE-HD) - Requirements and test methods
- EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
European Committee for Standardization (CEN), Ultra-high molecular weight polyethylene molecular weight test method
- EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
- EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PEUHMW@ PE-HD) - Requirements and test methods
- EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
- EN ISO 11542-2:1998 Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 11542-2:1998
- EN ISO 11542-1:2001 Plastics - Ultra-High-Molecular-Weight Polythylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications
Association Francaise de Normalisation, Ultra-high molecular weight polyethylene molecular weight test method
- NF S94-060-4*NF ISO 5834-4:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4 : oxidation index measurement method
- NF ISO 5834-4:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 4 : méthode de mesurage de l'indice d'oxydation
- NF S94-060-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Part 4 : oxidation index measurement method.
- NF S94-060-3:2006 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3 : accelerated ageing methods.
- NF S94-060-5*NF ISO 5834-5:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5 : morphology assessment method
- NF S94-060-3*NF ISO 5834-3:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3 : accelerated ageing methods
- NF ISO 5834-5:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 5 : méthode d'évaluation de la morphologie
- NF ISO 5834-3:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 3 : méthodes de vieillissement accéléré
- NF S94-060-5:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5 : morphology assessment method.
- NF S94-060-1:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1 : powder form.
- NF S94-060-1*NF ISO 5834-1:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1 : powder form
- NF S94-060-2:2006 Implants for surgery - Ultra-high molecular-weight polyethylene - Part 2 : moulded forms.
- NF S94-060-2*NF ISO 5834-2:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2 : moulded forms
- NF ISO 5834-2:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 2 : produits sous forme moulée
- NF ISO 5834-1:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 1 : produits sous forme de poudre
- NF T51-230-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
- NF EN ISO 21304-2:2021 Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
- NF T51-230-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1 : designation system and basis for specifications.
- NF EN ISO 21304-1:2019 Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
- NF C32-011-407*NF EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407 : miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
- NF EN 60811-407:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 407 : essais divers - Mesure de l'augmentation de la masse des mélanges polyéthylène et polypropylène
Korean Agency for Technology and Standards (KATS), Ultra-high molecular weight polyethylene molecular weight test method
- KS P ISO 5834-4-2007(2017) Implants for surgery－Ultra-high molecular weight polyethylene－Part 4：Oxidation index measurement method
- KS P ISO 5834-4:2007 Implants for surgery－Ultra-high molecular weight polyethylene－Part 4：Oxidation index measurement method
- KS P ISO 5834-5-2007(2017) Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 5：Morphology assessment method
- KS P ISO 5834-3:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods
- KS P ISO 5834-3:2008 Implants for surgery-Ultra-high-molecular-weight polyethylene-Part 3:Accelerated ageing methods
- KS P ISO 5834-2:2012 Implants for surgery－Ultra-high molecular weight polyethylene－Part 2：Moulded forms
- KS P ISO 5834-1:2007 Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 1：Powder form
- KS P ISO 5834-5:2007 Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 5：Morphology assessment method
- KS P ISO 5834-2-2012(2017) Implants for surgery－Ultra-high molecular weight polyethylene－Part 2：Moulded forms
- KS P ISO 5834-1:2018 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
- KS M ISO 11542-2-2011(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
- KS M ISO 11542-2-2011(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
- KS M ISO 11542-2:2011 Plastics-Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
- KS M ISO 11542-1:2006 Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
- KS K 3102-2007 Test methods for molecular weight cutoff of hollow fiber ultrafiltration membrane
- KS M ISO 11542-1-2006(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
- KS M ISO 11542-1-2006(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
- KS C IEC 60189-1:2014 Low-frequency cables and wires with PVC insulation and PVC sheath — Part 1: General test and measuring methods
- KS C IEC 60811-407-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
- KS C IEC 60811-407:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
- KS C IEC 60811-4-1:2021 Insulating and sheathing materials of electric and optical cables —Common test methods — Part 4-1: Methods specific to polyethylene and polypropylene compounds — Resistance to environmental stress cra
RU-GOST R, Ultra-high molecular weight polyethylene molecular weight test method
- GOST R ISO 5834-4-2015 Implants for surgery. Ultra-high molecular weight polyethylene. Part 4. Oxidation index measurement method
- GOST R ISO 5834-3-2014 Implants for surgery. Ultra-high- molecular-weight polyethylene. Part 3. Accelerated ageing methods
- GOST R ISO 5834-2-2014 Implants for surgery. Ultra-high- molecular-weight polyethylene. Part 2. Moulded forms
- GOST R ISO 5834-1-2015 Implants for surgery. Ultrahigh-molecular-weight polyethylene. Part 1. Powder form
- GOST IEC 60811-407-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
International Organization for Standardization (ISO), Ultra-high molecular weight polyethylene molecular weight test method
- ISO 5834-4:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method
- ISO 5834-4:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method
- ISO 5834-3:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods
- ISO 5834-5:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method
- ISO 5834-3:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods
- ISO 5834-1:1998 Implants for surgery - Ultra-high molecular weight polyethylene - Part 1: Powder form
- ISO 5834-1:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form
- ISO 5834-2:1985 Implants for surgery — Ultra-high molecular weight polyethylene — Part 2: Moulded forms
- ISO 5834-1:1985 Implants for surgery — Ultra-high molecular weight polyethylene — Part 1: Powder form
- ISO 5834-2:2011 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms
- ISO 5834-5:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method
- ISO 5834-2:1998 Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms
- ISO 5834-2:2006 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms
- ISO 5834-2:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms
- ISO 5834-1:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
- ISO 5834-1:2005/cor 1:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form; Technical Corrigendum 1
- ISO 11542-2:1998 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 11542-1:1994 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 21304-1:2019 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
- ISO 11542-2:1998/cor 1:2007 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Technical Corrigendum 1
- ISO 11542-1:1994/Amd 1:1996 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications — Amendment 1
- ISO 4765:2022 Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
KR-KS, Ultra-high molecular weight polyethylene molecular weight test method
- KS P ISO 5834-4-2022 Implants for surgery — Ultra-high molecular weight polyethylene — Part 4: Oxidation index measurement method
- KS P ISO 5834-3-2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods
- KS P ISO 5834-5-2022 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method
- KS P ISO 5834-2-2022 Implants for surgery — Ultra-high molecular weight polyethylene — Part 2: Moulded forms
- KS P ISO 5834-1-2018 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
- KS C IEC 60811-407-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
- KS C IEC 60811-4-1-2021 Insulating and sheathing materials of electric and optical cables —Common test methods — Part 4-1: Methods specific to polyethylene and polypropylene compounds — Resistance to environmental stress cra
American Society for Testing and Materials (ASTM), Ultra-high molecular weight polyethylene molecular weight test method
- ASTM F2759-11 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
- ASTM F2214-02(2008) Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
- ASTM F2214-16 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
- ASTM F2214-02 Standard Test Method forIn Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
- ASTM F2848-21 Standard Specification for Medical-Grade Ultra-High-Molecular-Weight Polyethylene Yarns
- ASTM F2214-23 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
- ASTM F2003-00 Standard Guide for Accelerated Aging of Ultra-High Molecular Weight Polyethylene
- ASTM D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ASTM F2625-10 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM F2848-10 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
- ASTM F2848-16 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
- ASTM F2848-17 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
- ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
- ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- ASTM F2183-02 Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
- ASTM F2183-02(2008) Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
- ASTM D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ASTM D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM D4020-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM D4020-01a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM D4020-00a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM D4020-11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
- ASTM D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
- ASTM D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
- ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
- ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
- ASTM F2003-02(2008) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
- ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
- ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
- ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
- ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
- ASTM F648-10a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F648-14 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
- ASTM F648-10 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F648-00e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F648-00 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F2759-19 Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
- ASTM F648-21 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
- ASTM D3536-91 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
- ASTM F2565-13 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
- ASTM D3364-99(2019) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
- ASTM F648-04 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F648-07e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F648-07 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F2759-09 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
- ASTM F3336-22 Standard Practice for Lipid Preconditioning of Ultra-High-Molecular-Weight Polyethylene for Accelerated Aging
- ASTM F2003-02(2022) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene After Gamma Irradiation in Air
- ASTM F2003-02(2015) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
- ASTM F648-13 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
- ASTM D3364-99(2011) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
- ASTM F2102-06e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
- ASTM F2102-06 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
- ASTM F2102-01 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
- ASTM F2102-01e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
- ASTM F2565-06 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
- ASTM F2003-02 Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
- ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
- ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
- ASTM D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
- ASTM D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
- ASTM E1343-90(2001) Standard Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes
- ASTM F2565-21 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
- ASTM F2695-07 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
- ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
- ASTM F2695-12 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
- ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
- ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
- ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
- ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
- ASTM F2695-12(2020) Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
- ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
国家市场监督管理总局、中国国家标准化管理委员会, Ultra-high molecular weight polyethylene molecular weight test method
- GB/T 40169-2021 Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)
American National Standards Institute （ANSI), Ultra-high molecular weight polyethylene molecular weight test method
- ANSI/ASTM D6712:2001 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ANSI/ASTM D4020:2001 Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02)
- ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)
- ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
- ANSI/ASTM D4322:1996 Test Method for Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
Professional Standard - Chemical Industry, Ultra-high molecular weight polyethylene molecular weight test method
- HG/T 4375-2012 Modified material of ultra-high molecular weight polyethylene for pipe lining
- HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GM North America, Ultra-high molecular weight polyethylene molecular weight test method
- GM GM6419M-2001 Performance Requirements of Ultra High Modecular Weight Polyethlene (UHMW PE) Tape
- GM GMP.PE.051-1998 Polyethylene - Ultra High Molecular Weight, Ram Extrusion/Compression Molded Grade
- GM6419M-2011 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 3; Do Not Use on New Programs; No Replacement
Taiwan Provincial Standard of the People's Republic of China, Ultra-high molecular weight polyethylene molecular weight test method
- CNS 13382-24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1:Powder form)
- CNS 13382.24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1:Powder form)
- CNS 13382-25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2:Moulded Form)
- CNS 13382.25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2:Moulded Form)
German Institute for Standardization, Ultra-high molecular weight polyethylene molecular weight test method
- DIN ISO 5834-2:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2006) English version of DIN ISO 5834-2:2007-12
- DIN ISO 5834-2:2020-07 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2019)
- DIN ISO 5834-1:2020-07 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2019)
- DIN EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010); German version EN ISO 15527:2013
- DIN ISO 5834-1:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2005);English version of DIN ISO 5834-1:2007-06
- DIN ISO 5834-2:2014 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2011)
- DIN ISO 5834-2:2020 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2019)
- DIN ISO 5834-1:2020 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2019)
- DIN EN ISO 21304-2:2021-04 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021
- DIN 16783-2:1991 Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties
- DIN EN ISO 21304-1:2019-08 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019); German version EN ISO 21304-1:2019
- DIN EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)
- DIN EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021
- DIN EN ISO 11542-2:2010 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007); German version EN ISO 11542-2:1998 + AC:2008
- DIN EN ISO 11542-1:2002 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001); German version EN ISO 11542-1:2001
(U.S.) Ford Automotive Standards, Ultra-high molecular weight polyethylene molecular weight test method
GOSTR, Ultra-high molecular weight polyethylene molecular weight test method
- GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
国家药监局, Ultra-high molecular weight polyethylene molecular weight test method
- YY/T 0811-2021 Standard guide for extensively irradiation.Crosslinked ultra-high molecular weight polyethylene fabricated forms for surgical implant applications
IN-BIS, Ultra-high molecular weight polyethylene molecular weight test method
Professional Standard - Petrochemical Industry, Ultra-high molecular weight polyethylene molecular weight test method
- SH/T 1836-2023 Plastics - Determination of the melt volume-flow rate (MVR) of ultra-high molecular weight polyethylene (PE-UHMW)
Professional Standard - Commodity Inspection, Ultra-high molecular weight polyethylene molecular weight test method
- SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
- SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method
U.S. Military Regulations and Norms, Ultra-high molecular weight polyethylene molecular weight test method
- ARMY MIL-DTL-32398-2013 LAMINATE: CROSS-PLIED ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) UNIDIRECTIONALLY REINFORCED PLASTIC ARMOR
国家食品药品监督管理局, Ultra-high molecular weight polyethylene molecular weight test method
- YY/T 1507.2-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 2: Determination of chlorine (Cl) element content by ion chromatography
- YY/T 1507.3-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 3 Determination of calcium (Ca) element content by ICP-MS
- YY/T 1507.1-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 1 Determination of titanium (Ti) element content by ICP-MS
Professional Standard - Recommended Standards for Engineering Construction, Ultra-high molecular weight polyethylene molecular weight test method
- CECS 306-2012 Construction and acceptance regulations of ultra-high molecular weight polyethylene steel skeleton composite pipe pipeline
GM Global, Ultra-high molecular weight polyethylene molecular weight test method
- GMW 16720-2012 Polyethylene - Linear Ultra High Molecular Weight, Ram Extrusion Issue 1; English
- GMW 16879-2013 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 1; English [Replaced: GMNA GM6419M, GMNA GM6419M, GMNA GM6419M, GMNA GM6419M]
Japanese Industrial Standards Committee (JISC), Ultra-high molecular weight polyethylene molecular weight test method
- JIS K 6936-2:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
- JIS K 6936-2:1999 Plastics -- Ultra-high-molecular weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
- JIS K 6936-1:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
- JIS K 6936-1:1999 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specification
- JIS C 3660-4-1:2011 Insulating and sheathing materials of electric and optical cables -- Common test methods -- Part 4-1: Methods specific to polyethylene and polypropylene compounds -- Resistance to environmental stress cracking -- Measurement of the melt flow index -- Car
Danish Standards Foundation, Ultra-high molecular weight polyethylene molecular weight test method
- DS/ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
- DS/EN ISO 11542-2/AC:2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- DS/EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- DS/EN ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
- DS/EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- DS/EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
未注明发布机构, Ultra-high molecular weight polyethylene molecular weight test method
- BS EN ISO 11542-2:1998(2007) Plastics — Ultra - high - molecular - weight polyethylene (PE - UHMW) moulding and extrusion materials — Part 2 : Preparation oftest specimens and determination ofproperties
ES-UNE, Ultra-high molecular weight polyethylene molecular weight test method
- UNE-EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
- UNE-EN ISO 21304-1:2020 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)
IT-UNI, Ultra-high molecular weight polyethylene molecular weight test method
- UNI EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
AT-ON, Ultra-high molecular weight polyethylene molecular weight test method
- OENORM EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
CH-SNV, Ultra-high molecular weight polyethylene molecular weight test method
- SN EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
Lithuanian Standards Office , Ultra-high molecular weight polyethylene molecular weight test method
- LST EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
- LST EN ISO 11542-2:2000 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)
- LST EN ISO 11542-2:2000/AC:2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)
- LST EN ISO 11542-1:2002 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)
PL-PKN, Ultra-high molecular weight polyethylene molecular weight test method
- PN-EN ISO 21304-2-2021-07 E Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
AENOR, Ultra-high molecular weight polyethylene molecular weight test method
- UNE-EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 11542-2:1998)
- UNE 212002-1:2014 Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods.
- UNE-EN ISO 11542-1:2002 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications. (ISO 11542-1:2001)
- UNE-EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ultra-high molecular weight polyethylene molecular weight test method
- GB/T 31984-2015 Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA)
Professional Standard - Petroleum, Ultra-high molecular weight polyethylene molecular weight test method
- SY/T 6662.5-2014 Non-metallic composite pipes for petroleum and natural gas industries.Part5: Reinforced ultra-high molecular weight polyethylene coiled composite pipes and end fittings
- SY 6662.5-2014 Non-metallic composite pipes for the oil and gas industry - Part 5: Reinforced ultra-high molecular weight polyethylene conforming coiled pipes and joints
European Committee for Electrotechnical Standardization（CENELEC）, Ultra-high molecular weight polyethylene molecular weight test method
- EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le
- EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
International Electrotechnical Commission (IEC), Ultra-high molecular weight polyethylene molecular weight test method
- IEC 60189-1:2018 RLV Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
- IEC 60189-1:1986 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 1 : General test and measuring methods
- IEC 60189-1/AMD3:1992 Low-frequency cables and wires with PVC insulation and PVC sheath; part 1: general test and measuring methods; amendment 3
- IEC 60189-1:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
- IEC 60189-1:2018 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
CZ-CSN, Ultra-high molecular weight polyethylene molecular weight test method
- CSN 56 0210-12-1994 Testing methods of alcoholic bevereges. Determination of Methylalcohol, Esters, Aldehydes and Heigh Molecular Weight lcohols
ZA-SANS, Ultra-high molecular weight polyethylene molecular weight test method
- SANS 60811-4-1:2004 Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon blac