ZH

RU

ES

Detection method of cesium ion

Detection method of cesium ion, Total:499 items.

In the international standard classification, Detection method of cesium ion involves: Water quality, Analytical chemistry, Non-metalliferous minerals, Galvanic cells and batteries, Construction materials, Products of the chemical industry, Mining equipment, Products of the textile industry, Non-ferrous metals, Optics and optical measurements, Fertilizers, Power stations in general, Leather technology, Insulating materials, Soil quality. Pedology, Sugar. Sugar products. Starch, Electric road vehicles, Pulps, Paper and board, Semiconducting materials, Road engineering, Fuels, Air quality, Spices and condiments. Food additives, Sterilization and disinfection, Non-destructive testing, Inorganic chemicals, Beverages, Electronic tubes, Laboratory medicine, Adhesives, Industrial furnaces, Measurement of volume, mass, density, viscosity, Geology. Meteorology. Hydrology, Protection against crime, Electronic display devices, Products of non-ferrous metals, Organic chemicals, Raw materials for rubber and plastics, General methods of tests and analysis for food products, Fruits. Vegetables, Animal feeding stuffs, Road vehicles in general, Powder metallurgy, Semiconductor devices, Ceramics, Metrology and measurement in general, Electronic components in general, Crude petroleum, Energy and heat transfer engineering in general, Metalliferous minerals, Chipless working equipment, Electricity. Magnetism. Electrical and magnetic measurements, Terminology (principles and coordination), Paint ingredients, Test conditions and procedures in general, Astronomy. Geodesy. Geography, Services, Nuclear energy engineering, Tobacco, tobacco products and related equipment, Wastes, Lubricants, industrial oils and related products, Testing of metals, Milk and milk products.


Group Standards of the People's Republic of China, Detection method of cesium ion

  • T/QAS 070-2021 Determination of Rubidium and Cesium in Brine Inductively Coupled Plasma Mass Spectrometry
  • T/MBJX 0004-2020 State of Charge Detection Method for Lithium-ion Power Batteries
  • T/CBMCA 031-2022 On-site detection method of negative ion functional building materials
  • T/GDCKCJH 068-2022 Performance requirements and test methods for electrostatic eliminator of ion fan
  • T/GERS 0001-2020 Test method of critical control points in the production of lithium-ion traction battery
  • T/LFX 005-2023 Rapid detection method of chloride ion in inorganic fertilizer
  • T/QAS 082.5-2023 Chemical Analysis of Rock Salt and Glauber's Salt Part 5: Determination of Lithium, Copper, Lead, Zinc, Rubidium, Cesium and Arsenic by Inductively Coupled Plasma Mass Spectrometry
  • T/CI 035-2022 Calibration method of magnification of X-ray detection equipment for lithium ion battery
  • T/FDSA 003-2019 Test method of the process challenge device(PCD)during low-temperature plasma of hydrogen peroxide
  • T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
  • T/CPCIF 0249-2023 Determination of N-methyldiethanolamine in industrial circulating water—Ion chromatography
  • T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
  • T/GZTPA 0010-2021 Gas Chromatography Hydrogen Flame Ionization Method for Detection of Soluble Sugar in Guizhou Tea
  • T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
  • T/SZTIC 002-2021 Rapid detection of illegal additives in health food by direct ionization miniature mass spectrometry
  • T/CAS 406-2020 Evaluation of Air Odor in Cars: Coupling Analysis Method of Sensory and Photoion Detector
  • T/ASC 16-2020 Alternating-current method for measuring chloride penetration resistance of concrete
  • T/CIESC 0021-2022 Standard Test Method for Permanent Gases in Polymer Grade Ethylene and Propylene by Gas Chromatography and Helium Ionization Detector

Japanese Industrial Standards Committee (JISC), Detection method of cesium ion

  • JIS K 0556:1995 Testing methods for determination of anions in highly purified water
  • JIS B 9929:2006 Standard for measuring methods of airborne ion density
  • JIS R 1661:2004 Method for conductivity measurement of ion-conductive fine ceramics
  • JIS K 0170-8:2011 Testing methods for water quality by flow analysis -- Part 8: Anionic surfactants
  • JIS K 0170-8:2019 Testing methods for water quality by flow analysis -- Part 8: Anionic surfactants
  • JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water

PL-PKN, Detection method of cesium ion

  • PN C04860-01-1990 ?on exchange resin Testing methods Introduction
  • PN C04860-02-1990 ?on exchange resins Testing methods Sampling
  • PN C04860-12-1991 Ion exchange resins. Testing methods. Determination of the operating exchange capacity of cation exchange resins in hydrogen ion exchange
  • PN C04860-11-1991 Ion exchange resins. Testing methods. Determination of the total strongly basic and weakly basic anion exchage resins
  • PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
  • PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
  • PN C04860-04-1990 ?on exchange resins Testing methods Column for determination of exchange ' capacities under dynamie conditions
  • PN P04991-1989 Methods of chemical tests Knitted medical articles Determination of heavy metals jons
  • PN C07000-1993 Chemical products for industrial use. General method for determination of chloride ions. Potentiometric method

Professional Standard - Geology, Detection method of cesium ion

  • DZ/T 0064.51-1993 Groundwater quality testing methods - Determination of chloride, fluoride, bromide, nitrate and sulfate by ion chromatography
  • DZ/T 0064.80-2021 Groundwater Quality Analysis Methods Part 80: Determination of Lithium, Rubidium, Cesium and Other 40 Elements by Inductively Coupled Plasma Mass Spectrometry
  • DZ/T 0064.28-1993 Groundwater quality testing methods - Determination of potassium, sodium, lithium and ammonium by ion chromatography
  • DZ/T 0064.54-1993 Groundwater Quality Examination Method Determination of Fluoride by Ion Selective Electrode
  • DZ/T 0064.57-1993 Groundwater quality testing method Nessler's reagent colorimetric method for the determination of ammonium ions
  • DZ/T 0064.42-1993 Groundwater Quality Inspection Method Determination of Strontium and Barium by Inductively Coupled Plasma Atomic Emission Spectrometry
  • DZ/T 0064.11-1993 Groundwater quality testing method Determination of arsenic by gas-liquid separation hydride atomic fluorescence method
  • DZ/T 0064.80-1993 Determination of 39 elements such as lithium by plasma mass spectrometry
  • DZ/T 0064.22-1993 Groundwater quality inspection method Determination of copper, lead, zinc, cadmium, manganese, chromium, nickel, cobalt, vanadium, tin, beryllium and titanium by inductively coupled plasma atomic emission spectrometry

American Society for Testing and Materials (ASTM), Detection method of cesium ion

  • ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
  • ASTM D3049-89(2003) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
  • ASTM D1179-99 Standard Test Methods for Fluoride Ion in Water
  • ASTM D4548-91(1996) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
  • ASTM D4548-11(2019) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
  • ASTM D4327-17 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
  • ASTM D4327-11 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
  • ASTM D5542-04 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatograp
  • ASTM D511-03 Standard Test Methods for Calcium and Magnesium In Water
  • ASTM D512-89(1999) Standard Test Methods for Chloride Ion In Water
  • ASTM D516-02 Standard Test Method for Sulfate Ion in Water
  • ASTM D516-90(1995)e1 Standard Test Method for Sulfate Ion in Water
  • ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
  • ASTM D1246-16 Standard Test Method for Bromide Ion in Water
  • ASTM D1179-04 Standard Test Methods for Fluoride Ion in Water
  • ASTM D4658-08 Standard Test Method for Sulfide Ion in Water
  • ASTM D5542-94(1999)e1 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D5542-16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D5996-05(2009) Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM D3561-16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • ASTM D7359-14 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection &40;Combustion Ion Chromatography-CIC&41;
  • ASTM D5996-05 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM D7359-14a Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • ASTM D7359-18 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion
  • ASTM D5996-16 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM D6919-17 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • ASTM D7359-08 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • ASTM D7359-13 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection lpar;Combustion Ion Chromatography-CICrpar;
  • ASTM D7359-23 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion
  • ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • ASTM D512-04 Standard Test Methods for Chloride Ion In Water
  • ASTM D512-10 Standard Test Methods for Chloride Ion In Water
  • ASTM D1179-16 Standard Test Methods for Fluoride Ion in Water
  • ASTM D512-12 Standard Test Methods for Chloride Ion In Water
  • ASTM D5996-96(2000) Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM D6919-03 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • ASTM D6919-09 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • ASTM D5827-09(2015) Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
  • ASTM D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D2024-65(1997) Standard Test Method for Cloud Point of Nonionic Surfactants
  • ASTM D2024-09(2023) Standard Test Method for Cloud Point of Nonionic Surfactants
  • ASTM D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
  • ASTM D7423-09 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D5599-15 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM E2371-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
  • ASTM E2371-21a Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
  • ASTM D4519-94(1999)e1 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
  • ASTM D3868-95(1999) Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
  • ASTM D4458-09 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
  • ASTM D3352-08 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
  • ASTM D7131-05 Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
  • ASTM E1787-16 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM D4519-94(2005) Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
  • ASTM D4519-16 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
  • ASTM D7423-09(2014) Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D7423-16 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D4266-96 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
  • ASTM D4266-17 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
  • ASTM C1432-03 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1432-99 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1432-03(2008) Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1432-15 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM E1787-96 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM E1787-02 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM E1787-08 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM D3634-99(2005)e1 Standard Test Method for Trace Chloride Ion in Engine Coolants
  • ASTM D3634-99(2005) Standard Test Method for Trace Chloride Ion in Engine Coolants
  • ASTM D3634-99e1 Standard Test Method for Trace Chloride Ion in Engine Coolants
  • ASTM D3634-99(2015) Standard Test Method for Trace Chloride Ion in Engine Coolants
  • ASTM D5599-17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5599-18 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D7423-16e1 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D5257-03 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
  • ASTM D5257-97 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
  • ASTM E2469-06 Standard Test Method for Chloride in Monoethylene Glycol by Ion Chromatography
  • ASTM D5257-11 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
  • ASTM D5257-17 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
  • ASTM E1613-04 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
  • ASTM C1111-98 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • ASTM D4951-09 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • ASTM C1111-10(2020) Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • ASTM D4130-82(1998) Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
  • ASTM D7591-12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
  • ASTM D6508-00(2005)e1 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM D6508-00 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM D6508-00(2005)e2 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM E1277-96 Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
  • ASTM D7303-17 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
  • ASTM E2371-04 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
  • ASTM D4190-03 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • ASTM D4190-82(1988)e1 Standard Test Method for Elements in Water by Direct-Current Argon Plasma atomic Emission Spectroscopy
  • ASTM D1976-12 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
  • ASTM D4190-15 Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
  • ASTM D7423-23 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM C1543-09 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
  • ASTM C1543-10a Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
  • ASTM UOP975-01 Fluorine in Liquid Hydrocarbons and LPG by Oxidative Combustion with Ion-Selective Electrode Detection
  • ASTM D5673-10 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM D6508-15 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • ASTM D5987-96(2015) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
  • ASTM C1543-10 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

Professional Standard - Chemical Industry, Detection method of cesium ion

  • HG/T 6107~6110-2022 Determination methods of sodium ions, chloride ion content, chemical oxygen demand (COD) and calcium and magnesium ions in waste sulfuric acid (2022)

Professional Standard - Commodity Inspection, Detection method of cesium ion

  • SN/T 2918-2011 Determination of sulfite in food for export.Ion chromatography method
  • SN/T 0736.14-2011 Test method of import and export fertilizers.part 14:Determination of trace inorganic anions by ion chromatography method
  • SN/T 0736.10-1999 Chemical analysis of fertilizers for import and export.Determination of free acid content
  • SN/T 2784-2011 Detection method of free ammonia in imported phenolic plastics
  • SN/T 0448-2011 Determination of arsenic,lead,mercury,cadmium in foodstuffs.ICP-MS method
  • SN/T 2288-2009 Determination of beryllium,cadmium,thallium,chromium,arsenic,tellurium,neodymium and lead in cosmetics for import and export.ICP-MS method
  • SN/T 0736.10-2013 Test method of import and export fertilizers.Part 10:Determination of free acid
  • SN/T 3695.1-2014 Determination of mirex in electrical and electronic products.Part 1:Gas chromatography-flame ionization detector method
  • SN/T 3919-2014 Determination of water-soluble chloride content in iron ores.Ion chromatography
  • SN/T 0736.12-2009 Chemical analysis of fertilizers for import and export.Determination of arsenic,chromium,cadimium,mercury and lead.Inductively coupled plasma mass spectrometry(ICP-MS)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection method of cesium ion

  • GB/T 42272-2022 The method for determining the chloride diffusion coefficient for cement mortar
  • GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
  • GB/T 11446.7-2013 Test method for trace anion in electronic grade water by ion chromatography
  • GB/T 11446.7-1997 Test method for trace chloride, nitrate, phosphate, sulfate in electronic grade water by ion-chromatography
  • GB/T 38514-2020(英文版) Test methods for electrodeionization stacks
  • GB/T 24580-2009 Test method for measuring Boron contamination in heavily doped n-type silicon substrates by secondary ion mass spectrometry
  • GB/T 24575-2009 Test method for measuring surface sodium, aluminum, potassium, and iron on silicon and epi substrates by secondary ion mass spectrometry
  • GB/T 14571.5-2016 Test Methods for Ethylene Glycols for Industrial Use Part 5: Determination of Chloride Ion Chromatography
  • GB/T 3789.7-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of anode ion current
  • GB/T 32193-2015 Standard practice for testing flame ionization detectors used in gas or supercritical fluid chromatography
  • GB/T 23273.6-2009 Methods for chemical analysis of cobalt oxalate.Part 6:Determination of chlorine ion content.Ion selective electrode method
  • GB/T 15075-1994 Method for testing EPMA instrument
  • GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
  • GB/T 13025.7-1999 General test method in salt industry--Determination of iodide ion
  • GB/T 13025.5-1991 General test method in salt industry--Determination of chloride ion
  • GB/T 13025.11-1994 General test method in salt industry-Determination of fluorine
  • GB/T 13025.13-1994 General test method in salt industry- Determination of arsenic ion
  • GB/T 13025.5-2012 General test method in salt industry.Determination of chloride ion
  • GB/T 13025.12-1994 General test method in salf industry-Determination of barium ion
  • GB/T 13025.9-1991 General test method in salt industry--Determination of lead ion (photometry)
  • GB/T 13025.6-1991 General test method in salt industry--Determination of calcium and magnesium ions
  • GB/T 13025.8-1991 General test method in salt industry--Determination of sulfate ion
  • GB/T 2400-1980 Determination of compatibility indices of cationic dyes used for dyeing acrylic fibres
  • GB/T 18962-2003 General test method in salt industry--Determination of lead lon(AAS)
  • GB/T 20675-2006 General test method in salt industry Determination of copper ion (AAS)
  • GB/T 1819.15-2006 Methods for chemical analysis of tin concentrates. Determination of fluorine content. The ion-selective electrode method
  • GB/T 26140-2023 Neutron Diffraction Method for Nondestructive Testing Residual Stress Measurement
  • GB/T 26140-2010 Non-destructive testing.Standards test method for determining residual stresses by neutron diffraction
  • GB/T 17087-1997 Workplace air--Determination of molybdenum--ICP-AES method
  • GB/T 11067.4-2006 Methods for chemical analysis of silver. Determination of antimony content. The inductively coupled plasma atomic emission spectrometric method
  • GB/T 4324.13-2008 Methods of chemical analysis of tungsten Determination of calcium content Inductively coupled plasma atomic emission spectrometry
  • GB/T 10539-1989 Analytical methods of boiler water and cooling water--Determination of potassium--Flame photometry

RU-GOST R, Detection method of cesium ion

  • GOST 15615-1979 Ion exchange rezins. Method for determination of chlorine ions content
  • GOST 17554-1972 Ion-exchange membranes. Method for determination of water
  • GOST 6433.6-1984 Electrical insulating materials. Methods for determination of ionic foreign matters by extraction
  • GOST 12868-1977 Ion-exchange resins. Methods for determination of iron
  • GOST 26951-1986 Soils. Determination of nitrate byionometric method
  • GOST 20422-1989 Pulp, paper and board. Methods for determination of chloride-ions and sulphate-ions fraction of total mass
  • GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
  • GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
  • GOST R 54743-2011 Juice products. Determination of free amino acids by ion-exchange chromatography method
  • GOST 24596.5-2015 Feed phosphates. Method for determination of hydrogen ions activity value
  • GOST 17338-1988 Jon-exchegers. Method for determination of ocmotic stability
  • GOST 26425-1985 Soils. Methods for determination of chloride ion in water extract
  • GOST 26426-1985 Soils. Methods for determination of sulphate ion in water extract
  • GOST R 8.846-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Air ionizers and air ion generators. Methods of measuring their parameters
  • GOST 30828-2002 Anionic surface-active agents. Methods for determination of active matter
  • GOST 17552-1972 Ion-exchange membranes. Methods for determination of total and equilibrium exchange capacity
  • GOST 29234.6-1991 Moulding sands. Methods for determination of water extract hydrodgen ions concentration (pH)
  • GOST R 54353-2011 Food common salt. Determination of sulphate-ion mass fraction by gravimetric method
  • GOST R 51018-1997 Goods of household chemistry. Method for determination of non-ionic surface-active agent
  • GOST R 51022-1997 Goods of household chemistry. Methods for determination of anionic surface-active agent
  • GOST 32466-2013 Goods of household chemistry. Method for determination of non-ionic surface-active agent
  • GOST 32442-2013 Goods of household chemistry. Methods for determination of anionic surface-active agent
  • GOST R 54351-2011 Food common salt. Determination of chlor-ion mass fraction by mercurymetric method
  • GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method

Professional Standard - Coal, Detection method of cesium ion

  • MT/T 252-2000 Determination method of potassium ion and sodium ion in coal mine water
  • MT/T 203-1995 Determination method of calcium ion and magnesium ion in coal mine water
  • MT 252-1991 Determination method of potassium ion and sodium ion in coal mine water
  • MT/T 360-2005 Determination of fluorine ion in coal mine water
  • MT/T 368-2005 Determination of iron ion in coal mine water
  • MT/T 373-2005 Determination of aluminum ion in coal mine water
  • MT/T 371-2005 Determination of sulfion in coal mine water
  • MT/T 892-2000 Determination of iodide ions in coal mine water
  • MT/T 360-1994 Determination method of fluoride ion in coal mine water
  • MT/T 368-1994 Determination method of iron ion in coal mine water
  • MT/T 373-1994 Determination method of aluminum ion in coal mine water
  • MT/T 201-1995 Determination method of chloride ion in coal mine water
  • MT/T 202-1995 Determination method of calcium ion in coal mine water
  • MT/T 254-2000 Determination method of ammonium ion in coal mine water
  • MT 254-1991 Determination method of ammonium ion in coal mine water
  • MT/T 372-1994 Determination method of sulfur ion in coal mine water - iodometric method
  • MT/T 205-1995 Determination method of sulfate ion content in coal-mine water
  • MT/T 205-2011 Determination of sulphate radical hydronium in coal-mine water
  • MT/T 253-2000 Determination method of nitrate ion in coal mine water
  • MT/T 483-1995 Determination method of iron ion in acid water of coal mine
  • MT/T 485-1995 Determination method of calcium ion in acid water of coal mine
  • MT/T 481-1995 Determination method of chloride ion in acid water of coal mine
  • MT/T 484-1995 Determination method of aluminum ion in acid water of coal mine
  • MT/T 486-1995 Determination method of magnesium ion in acid water of coal mine
  • MT 253-1991 Determination method of nitrate ion in coal mine water
  • MT/T 251-2000 Determination method of nitrite ion in coal mine water
  • MT 251-1991 Determination method of nitrite ion in coal mine water
  • MT/T 479-1995 Determination method of nitrate ion in acid water of coal mine
  • MT/T 371-1994 Determination method of sulfur ion in coal mine water p-aminodimethylaniline colorimetric method

German Institute for Standardization, Detection method of cesium ion

  • DIN 38405-1:1985-12 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
  • DIN 54411:2004 Testing of ion exchangers - Recycling method for testing ion exchangers and polymer adsorption resins
  • DIN 38405-1:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
  • DIN 38405-5:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
  • DIN 38405-5:1985-01 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
  • DIN 53345-2:1978 Testing of fat liquors and greases for leather; methods of analysis, determination of ionity
  • DIN 38405-9:1979 German standard methods for examination of water, waste water and sludge; anions (group D), determination of nitrate ion (D9)
  • DIN 38405-17:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17)
  • DIN 38406-1:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
  • DIN 38406-11:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11)
  • DIN 38406-7:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
  • DIN 38406-2:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
  • DIN 38406-2:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
  • DIN 38406-1:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
  • DIN 38405-13:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13)
  • DIN EN 16318:2016-07 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013+A1:2016
  • DIN 38406-24:1993 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24)
  • DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
  • DIN 38406-5:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
  • DIN 38405-4:1985-07 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
  • DIN EN 16318:2014 Fertilizers - Determination of trace elements - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013
  • DIN 38406-7:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
  • DIN 38406-11:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11)
  • DIN 38406-24:1993-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24)
  • DIN CEN/TS 16318:2012 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version CEN/TS 16318:2012
  • DIN 38405-35:2004-09 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
  • DIN 38406-18:1990 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)
  • DIN 38406-5:1983-10 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
  • DIN 38405-4:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
  • DIN EN 17246:2018 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD); German and English version prEN 17246:2018
  • DIN 38405-17:1981-03 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17)
  • DIN 38406-6:1998 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 38405-7:2002-04 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
  • DIN EN ISO 19340:2019-01 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017); German version EN ISO 19340:2017
  • DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
  • DIN 38405-27:1992 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of readily liberatet sulfide (D 27)
  • DIN 38406-32:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
  • DIN 38405-32:2000 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32)
  • DIN 38405-23:1994 German standard methods for the examination of water, waste water and sludge - Anions (Group D) - Part 23: Determination of selenium by atomic absorption spectrometry (D 23)
  • DIN 38406-18:1990-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)
  • DIN EN 17813:2022-02 Environmental matrices - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods; German and English version prEN 17813:2022 / Note: Date of issue 2022-01-14
  • DIN 38405-23:1994-10 German standard methods for the examination of water, waste water and sludge - Anions (Group D) - Part 23: Determination of selenium by atomic absorption spectrometry (D 23)
  • DIN 38406-32:2000-05 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
  • DIN 38406-33:2000-06 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33)
  • DIN 38405-32:2000-05 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32) / Note: To be replaced by DIN ISO 17378-2 (2017-01, t).
  • DIN 38405-7:2002 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
  • DIN 38405-13:2011 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 13: Determination of cyanides (D 13)
  • DIN 38406-13:1992 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13)
  • DIN 38406-14:1992 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14)
  • DIN 38406-8:2004-10 German standard methods for examination of water, waste water and sludge - Cations (group E) - Part 8: Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame (E 8)
  • DIN 38405-13:2011-04 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 13: Determination of cyanides (D 13)
  • DIN 38406-3:2002-03 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric method (E 3)
  • DIN 38406-6:1998-07 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 38406-26:1997 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 26: Determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26)
  • DIN EN 17246:2019 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
  • DIN EN 17246:2019-11 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD); German version EN 17246:2019
  • DIN EN ISO 22184:2021-06 Milk and milk products - Determination of the sugar contents - High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD) (ISO 22184:2021); German version EN ISO 22184:2021
  • DIN 38405-9:2011 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9)
  • DIN 38405-21:1990-10 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21)
  • DIN EN 17813:2022 Environmental matrices - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods; German and English version prEN 17813:2022
  • DIN EN ISO 19340:2019 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)

Association Francaise de Normalisation, Detection method of cesium ion

  • NF T90-048*NF EN ISO 14911:1999 Water quality - Determination of dissolved Li+, Na+, NH 4+, K+, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography - Method for water and waste water.
  • NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
  • NF X31-130:1999 Soil quality - Chemical methods - Determination of cationic exchange capacity (CEC) and extractible cations
  • NF U42-421*NF EN 16318+A1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF U42-421:2014 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF U42-421/IN1*NF EN 16318/IN1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF EN 16318/IN1:2016 Engrais - Dosage des éléments trace - Dosage du chrome (VI) par spectrophotométrie (méthode A) et chromatographie ionique avec détection spectrophotométrique (méthode B)
  • NF EN 16318+A1:2016 Engrais - Dosage des éléments trace - Dosage du chrome (VI) par spectrophotométrie (méthode A) et chromatographie ionique avec détection spectrophotométrique (méthode B)
  • NF V18-217*NF EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
  • NF EN 17294:2019 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage des acides organiques par chromatographie ionique avec détection conductimétrique (CI-DC)
  • NF EN 1787:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant de la cellulose
  • NF EN 1786:1997 Produits alimentaires - Détection d'aliments ionisés contenant des os ou des arêtes - Méthode par spectroscopie RPE.
  • NF EN 13708:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant des sucres cristallisés
  • NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
  • NF EN 17246:2019 Engrais - Détermination du perchlorate dans les engrais minéraux par chromatographie ionique et détection conductimétrique (IC-CD)
  • NF T73-411:1980 Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring.
  • NF EN 12619:2013 Émissions de sources fixes - Détermination de la concentration massique en carbone organique total - Méthode du détecteur continu à ionisation de flamme

Professional Standard - Machinery, Detection method of cesium ion

  • JB/T 9361-1999 Test method for flame ionization detector of gas chromatography

RO-ASRO, Detection method of cesium ion

  • STAS 10027/2-1987 DETECTION' AND MEASUREMENT BY ELECTRIC MEANS OF IONIZING RADIATIONS ELECTRONIC SUB-ASSEMBLIES Terminology
  • STAS SR ISO 6227:1996 Chemical products for industrial use - General method for determination of chloride ions - Potentiometric method

工业和信息化部, Detection method of cesium ion

  • YS/T 1380-2020 Chemical analysis methods for rhodium compounds Determination of chloride ion and nitrate ion content Ion chromatography
  • HG/T 6107-2022 Determination method of sodium ions in waste sulfuric acid
  • SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials
  • HG/T 6110-2022 Determination method of calcium and magnesium ions in waste sulfuric acid
  • HG/T 6108-2022 Determination method of chloride ion content in waste sulfuric acid
  • YS/T 1065.6-2019 Methods for testing the physical and chemical properties of zeolites Part 6: Determination of calcium exchange rate Ion-selective electrode method
  • YS/T 1569.5-2022 Methods for chemical analysis of lithium nickel manganate Part 5: Determination of chloride ion content Ion selective electrode method
  • YS/T 1057.2-2020 Methods for chemical analysis of cobalt tetroxide Part 2: Determination of chloride ion content Ion selective electrode method
  • YS/T 1115.13-2016 Methods for chemical analysis of copper ores and tailings Part 13: Determination of fluorine content Ion-selective electrode method and ion chromatography
  • QB/T 5529-2020 Method for detection of water-soluble pyrophosphate and tripolyphosphate in oral hygiene and care products Ion chromatography

Professional Standard - Electricity, Detection method of cesium ion

  • DL/T 954-2005 Analysis of water and steam in fossil fuel power plant Determination of fluoride, acetate, formate, chloride, nitrite, nitrate, phosphate and sulfate by ion chromatography
  • DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method

VN-TCVN, Detection method of cesium ion

  • TCVN 2315-1978 Reagents.Method for the determination of anions impurities

Guangxi Provincial Standard of the People's Republic of China, Detection method of cesium ion

  • DB45/T 1152-2015 Ion Chromatography Method for Detection of Sulfite Ion and Phosphate Ion Content in Intermediate Products of Sugar Production Process

Guangdong Provincial Standard of the People's Republic of China, Detection method of cesium ion

  • DB4403/T 20-2019 Detection method of electric vehicle on-board lithium-ion power battery system

国家市场监督管理总局、中国国家标准化管理委员会, Detection method of cesium ion

  • GB/T 39701-2020 Limit and test method of ammonium ion content in fly ash
  • GB/T 40307-2021 Non-destructive testing—Test method for texture by neutron diffraction
  • GB/T 39285-2020 Method for chemical analysis of palladium compounds—Determination of chlorine content—Ion chromatography
  • GB/T 40231-2021 Restricted substance in electrical and electronic products—Determination of hexavalent chromium—Ion chromatography method
  • GB/T 40798-2021 Chemical analysis method of ion-adsorption rare earth ore—Determination of total rare earth contents—Inductively coupled plasma mass spectrometry
  • GB/T 10656-2022 Analysis of water used in boiler and cooling system—Determination of zinc
  • GB/T 37765-2019 Qualitative determination methods of asbestos in electrical and electronic products
  • GB/T 7739.14-2019 Methods for chemical analysis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry

Liaoning Provincial Standard of the People's Republic of China, Detection method of cesium ion

  • DB21/T 3178-2019 Technical specification for non-destructive testing of chloride ion permeability resistance of highway engineering concrete (PERMIT ion migration method)

Professional Standard - Building Materials, Detection method of cesium ion

  • JC/T 1016-2006 Testing on negative ion concentration of materials
  • JC/T 2147-2012 Determination of trace metal elements in high purity alumina by inductively coupled plasma atomic emission spectrometry

Korean Agency for Technology and Standards (KATS), Detection method of cesium ion

  • KS F 2598-2011 Standard test method for distribution of total chloride ion in concrete
  • KS I ISO 25140-2012(2017) Stationary source emissions-Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS M 0180-2009 Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography-CIC)
  • KS C IEC 60680-2006(2021) The methods of plasma equipment for electroheat applications
  • KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS C 7108-2007(2022) Plasma display panels - Visual quality inspection method of PDP module
  • KS I 3205-2007 Testing methods for determination of anions in highly purified water
  • KS I 3205-2021 Testing methods for determination of anions in highly purified water
  • KS M 0180-2009(2019) Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography-CIC)
  • KS C 7108-2007(2017) Plasma display panels - Visual quality inspection method of PDP module
  • KS C 7109-2007 Plasma display panels-Measuring method of acoustic noise on PDP module
  • KS M ISO 6227:2002 Chemical products for industrial use-General method for determination of chloride ions-Potentiometric method
  • KS M ISO 6227:2017 Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
  • KS M ISO 6227-2017(2022) Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
  • KS F 2737-2005 Testing method for chloride ion penetration of concrete by using indicator
  • KS C 7108-2007 Plasma display panels - Visual quality inspection method of PDP module
  • KS C 7109-2007(2022) Plasma display panels-Measuring method of acoustic noise on PDP module
  • KS F 2717-2013(2018) Standard test method for chloride ion content in hardened concrete
  • KS F 2737-2015 Testing method for chloride ion penetration of concrete by using indicator
  • KS M ISO 4311-2003(2018) Anionic and non-ionic surface active agents-Determination of the critical micellization concentration-Method by measuring surface tension with a plate, stirrup or ring
  • KS C 7114-2008 Plasma display panels(PDP)-Measuring method of moving picture resolution
  • KS F 2711-2002 Testing method for electrical indication of concrete’s ability to resist chloride ion penetration
  • KS F 2713-2002 Testing method for analysis of chloride in concrete and concrete raw materials
  • KS C 7114-2008(2018) Plasma display panels(PDP)-Measuring method of moving picture resolution
  • KS C IEC 60589:2018 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • KS M ISO 2268-2007(2017) Surface active agents(non-ionic)-Determination of polyethylene glycols and non-ionic active matter(adducts)-Weibull method
  • KS F 2711-2017 Standard test method for resistance of concrete to chloride ion penetration by electrical conductance
  • KS L 1627-2014 Testing method of impurities in high purity cobalt ingot by inductively coupled plasma spectrometric
  • KS F 2711-2017(2022) Standard test method for resistance of concrete to chloride ion penetration by electrical conductance
  • KS I ISO 14965:2007 Air quality-Determination of total non-methane organic compounds-Cryogenic preconcentration and direct flame ionization detection method
  • KS I ISO 14965:2017 Air quality-Determination of total non-methane organic compounds-Cryogenic preconcentration and direct flame ionization detection method

Association of German Mechanical Engineers, Detection method of cesium ion

  • VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)

YU-JUS, Detection method of cesium ion

  • JUS H.Z1.142-1984 Testing of industrial waters. Detarmination of fluoride by ion selective etectrode
  • JUS H.Z1.145-1987 Testing of industrial vvaters. Detsrmination content of sodium by ion selective electrode
  • JUS H.Z1.149-1987 Testing of industrial vvaters. Determination of anionic surfactants. Spectrophotometric method

British Standards Institution (BSI), Detection method of cesium ion

  • BS 6337-4:1984 General methods of chemical analysis. Method for determination of chloride ions by potentiometry
  • BS DD ENV 12140:1997 Method for determination of stable carbon isotope ratio (13C/12C) of sugars from fruit juices, using isotope ratio mass spectrometry
  • BS DD ENV 12141:1997 Method for determination of stable oxygen isotope ratio (18O/16O) of water from fruit juices, using isotope ratio mass spectrometry
  • BS DD ENV 12142:1997 Method for determination of stable hydrogen isotope ratio (2H/1H) of water from fruit juices, using isotope ratio mass spectrometry
  • BS EN 16318:2013+A1:2016 Fertilizers and liming materials. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • BS EN 17294:2019 Animal feeding stuffs. Methods of sampling and analysis. Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
  • BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • BS 7020-19:1989 Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method
  • BS 7020-19:1988 Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method
  • BS EN ISO 19340:2017 Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
  • BS 3762-3.1:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
  • BS ISO 21045:2018 Tobacco and tobacco products. Determination of ammonia. Method using ion chromatographic analysis
  • 22/30444882 DC BS EN 17813. Environmental matrices. Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection and complementary determination methods
  • BS 3762-3.7:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of total non-ionic matter content
  • BS EN ISO 22184:2021 Milk and milk products. Determination of the sugar contents. High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD)

ZA-SANS, Detection method of cesium ion

  • SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination

Professional Standard - Rare Earth, Detection method of cesium ion

  • XB/T 619-2015 Chemical analysis methods of ion type rare earth ore.Determination of total rare earth ion phase

Professional Standard - Hygiene , Detection method of cesium ion

  • WS/T 30-1996 Urine.Determination of fluoride.Ion specifi electrode method

IN-BIS, Detection method of cesium ion

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection method of cesium ion

  • GB/T 33584.1-2017 Seawater quality requirements and analysis method for seawater cooling system—Part 1:Determination of calcium and magnesium
  • GB/T 34641-2017 Non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination
  • GB/T 34500.1-2017 Chemical analysis methods for rare earth residue and waste water—Part 1:Determination of fluorine content—Ion selective electrode analysis
  • GB/T 20899.14-2017 Methods for chemical analysis of gold ores-Part 14: Determination of thallium content - Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 8152.13-2017 Methods for chemical analysis of lead concentrates—Part 13:Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 8151.21-2017 Methods for chemical analysis of zinc concentrates—Part 21:Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry

Danish Standards Foundation, Detection method of cesium ion

  • DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)

KR-KS, Detection method of cesium ion

  • KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS M ISO 6227-2017 Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
  • KS C IEC 60589-2018 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • KS M ISO 4311-2003(2023) Anionic and non-ionic surface active agents-Determination of the critical micellization concentration-Method by measuring surface tension with a plate, stirrup or ring

Professional Standard - Agriculture, Detection method of cesium ion

  • SN/T 5055.1-2018 Biodiesel Analysis Methods Part 1: Determination of Sodium, Potassium, Calcium and Magnesium Ion Ion Chromatography
  • GB/T 13025.7-1991 Determination of iodide ion general test method for salt industry
  • GB 13025.9-1991 Determination of lead ion (photometric method) general test method for salt industry
  • 水产品质量安全检验手册 9.3.1.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 1. Determination of Fluorine in Fishing Feed--Ion Selective Electrode Method (GBT 13083-2002)

Indonesia Standards, Detection method of cesium ion

  • SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge
  • SNI 06-6876-2002 Test methods of ammonia content in water by ion selective electrode
  • SNI 06-6989.51-2005 Water and waste water - Part 51: Test methods of anionic surfactant content with spectrophotometers by methylene blue

Professional Standard - Non-ferrous Metal, Detection method of cesium ion

  • YS/T 509.2-2008 Methods for chemical analysis of spodumene and lepidolite concentrates.Determination of rubidium oxide and caesium oxide contents.Flame atomic absorption sPedrometric method
  • YS/T 1593.4-2023 Methods for chemical analysis of crude lithium carbonate— Part 4:Determination of anion contents— Ion chromatography
  • YS/T 1593.3-2023 Methods for chemical analysis of crude lithium carbonate—Part 3:Determination of fluoride ion content—Ion selective electrode method
  • YS/T 928.6-2013 Methods for chemical analysis of nickel cobalt manganese composite hydroxide.Part 6:Determination of sulfate ion contents.Ion chromatography
  • YS/T 1072-2015 Chemical analysis methods of palladium-carbon.Determination of palladium contents.Inductively coupled plasma-atomic emission spectrometry

Sichuan Provincial Standard of the People's Republic of China, Detection method of cesium ion

  • DB51/T 2004-2015 Ion Chromatography for Detection of Sulfate in High Purity Sodium Hydroxide
  • DB51/T 1031-2010 Determination method of rare earth in tea - Inductively coupled plasma atomic emission spectrometry

Professional Standard - Public Safety Standards, Detection method of cesium ion

  • GA/T 930-2011 GC and chemistry examination methods for cyanogens ion in biology samples

Military Standard of the People's Republic of China-General Armament Department, Detection method of cesium ion

  • GJB 533.12-1988 Detection methods for 45 components of submarine cabin air. Determination of hydrogen fluoride content. Ion-selective electrode method.

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Detection method of cesium ion

Jiangxi Provincial Standard of the People's Republic of China, Detection method of cesium ion

  • DB36/T 689-2012 Chemical analysis method of ionic rare earth raw ore Determination of total amount of rare earth in ionic phase EDTA titration method

Professional Standard - Urban Construction, Detection method of cesium ion

  • CJ 26.12-1991 Municipal sewage water quality inspection method standard fluoride determination ion selective electrode method

UNKNOWN, Detection method of cesium ion

  • GB 20077663-T-604 Flame ionization detector test method for gas chromatography/supercritical fluid chromatography

European Committee for Standardization (CEN), Detection method of cesium ion

  • PD CEN/TS 16318:2012 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • EN ISO 22184:2021 Milk and milk products - Determination of the sugar contents - High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD) (ISO 22184:2021)
  • HD 381 S1-1979 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids

The American Road & Transportation Builders Association, Detection method of cesium ion

  • AASHTO T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
  • AASHTO T 291-1994(R 2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
  • AASHTO T 259-2002 Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration
  • AASHTO T 290-1995 Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil
  • AASHTO T 332-2007 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
  • AASHTO TP55-1998 Standard Test Method for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe 2000 Edition

Society of Motion Picture and Television Engineers (SMPTE), Detection method of cesium ion

Professional Standard - Electron, Detection method of cesium ion

  • SJ 3237-1989 Method for determination of trace oxygen in electronic grade Argon--Argon ionization gas chromatography method
  • SJ 3238-1989 Method for determination of trace Nitrogen in electronic grade Argon--Argon ionization gas chromatography method
  • SJ/T 11493-2015 Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry
  • SJ 3240-1989 Method for determination of trace Methane and hydrogen in electronic grade Argon--Argon ionization gas chromatography method
  • SJ/T 11498-2015 Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry

ES-UNE, Detection method of cesium ion

  • UNE-EN 16318:2015+A1:2016 Fertilizers and liming materials - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • UNE-EN 17294:2020 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
  • UNE-EN ISO 19340:2018 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)

Professional Standard - Energy, Detection method of cesium ion

煤炭工业部, Detection method of cesium ion

  • MT/T 482-1995 Determination method of sulfate ions in acidic coal mine water

AENOR, Detection method of cesium ion

  • UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
  • UNE 21370:1985 METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS.

Lithuanian Standards Office , Detection method of cesium ion

  • LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)

Canadian General Standards Board (CGSB), Detection method of cesium ion

  • CGSB 2.11-94 17.3-CAN/CGSB-1994 Methodes D'Echantillonnage Et Et D'Essai Des Savons Et Detergents Determination De La Teneur En Ingredient Anionique Actif (Par Titrage Cationique)

International Organization for Standardization (ISO), Detection method of cesium ion

  • ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
  • ISO 22184:2021 Milk and milk products - Determination of the sugar contents - High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD)
  • ISO 4311:1979 Anionic and non-ionic surface active agents; Determination of the critical micellization concentration; Method by measuring surface tension with a plate, stirrup or ring
  • ISO 14965:2000 Air quality - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method

CEN - European Committee for Standardization, Detection method of cesium ion

  • PREN 17294-2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
  • PREN 17246-2018 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Detection method of cesium ion

  • GJB 5969.7-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 7: Determination of boracium by methyl alcohol distillation.ion selective electrode method
  • GJB 5969.10-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 10: Determination of lead, zine and cadmium by ion chromatography

未注明发布机构, Detection method of cesium ion

  • GJB 8793.7-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants Part 7: Determination of boron Methanol distillation separation-ion selective electrode method
  • GJB 8793.10-2015 Testing method for niobium-coated uranium dioxide microspheres for use in submarine nuclear power plants - Part 10: Determination of lead, zinc and cadmium by ion chromatography

American National Standards Institute (ANSI), Detection method of cesium ion

  • ANSI/ASTM D5827:1998 Test Method for Determination of Chloride in Engine Coolant by Ion Chromatography

BE-NBN, Detection method of cesium ion

  • NBN T 02-207-1984 Chemical products for industrial use - General method for determination of chloride ions - Potentiometric method
  • NBN T 63-152-1983 Cationic surface active agents (hydrochlorides and hydrobromides) - Determination of critical micellization concentration - Method by measurement of counter ion activity

HU-MSZT, Detection method of cesium ion

AASHTO - American Association of State Highway and Transportation Officials, Detection method of cesium ion

  • TP 55-1998 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
  • TP55-1998 Standard Test Method for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
  • T 332-2007 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
  • T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
  • T291-1994 Standard Method of Test for Determining Water Soluble Chloride Ion Content in Soil

Professional Standard - Light Industry, Detection method of cesium ion

  • QB/T 4711-2014 Determination of inorganic elements in Chinese rice wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry
  • QB/T 4851-2015 Determination of inorganic elements in wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry

Standard Association of Australia (SAA), Detection method of cesium ion

GOSTR, Detection method of cesium ion

  • GOST 34606-2019 Veterinary preparation, feed, feed additive. Method for determination of the content of aromatic components by gas-liquid chromatography with flame ionization detection
  • GOST R IEC 62813-2020 Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics

Jiangsu Provincial Standard of the People's Republic of China, Detection method of cesium ion

  • DB32/T 4380-2022 Technical requirements and on-site testing methods for lithium-ion power battery systems of electric vehicles in operation

Professional Standard - Aviation, Detection method of cesium ion

  • HB/Z 5108.2-1999 Analytical method of phosphating solution Determination of chloride ion content by visual turbidimetry

KE-KEBS, Detection method of cesium ion

  • KS 05-459 Pt.5-1985 STANDARD SPECIFICATION FOR DRINKING WATER PART 5. METHODS FOR DETERMINING SALTS, CATIONS AND ANIONS IN DRINKING WATER

European Committee for Electrotechnical Standardization(CENELEC), Detection method of cesium ion

  • HD 381-1979 Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids

Professional Standard - Military and Civilian Products, Detection method of cesium ion

  • WJ 2595-2002 Ultrasonic Testing Method of Electron Beam Welding Piston Seam

CZ-CSN, Detection method of cesium ion

  • CSN 65 9037-1984 Vat dyestuffs. Metods of determination: — point of congelation — stability at centrifuging — concentration of hydrogen ions [pH - value)
  • CSN 34 6464-1985 Method of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • CSN 68 1143-1994 Testing methods for surfactans and detergents. Determination of anion-active tenside

国家能源局, Detection method of cesium ion

  • NB/T 25096-2018 Method for determination of organic leachables from ion exchange resins used in nuclear power plants

SE-SIS, Detection method of cesium ion

  • SIS SS IEC 589:1982 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids

CENELEC - European Committee for Electrotechnical Standardization, Detection method of cesium ion

  • HD 381-1978 Methods of Test for the Determination of Ionic Impurities in Electric Insulation Materials by Extraction with Liquids

国家质量监督检验检疫总局, Detection method of cesium ion

  • SN/T 4678-2016 Determination method of uranium and thorium in exported foods by inductively coupled plasma mass spectrometry

TH-TISI, Detection method of cesium ion

  • TIS 1765-1999 Anionic and non.ionic surface active agents.determination of the critical micellization concentration.method by measuring surface tension with a plate, stirrup or ring




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved