ZH
RU
ES

new liner

new liner, Total:382 items.

In the international standard classification, new liner involves: Pipeline components and pipelines, External water conveyance systems, Surface treatment and coating, Installations in buildings, External sewage systems, Rubber and plastics products, Valves, Protection against fire, Construction materials, Company organization and management, Rubber, Petroleum, petroleum products and natural gas handling equipment, Protection against dangerous goods, Fluid storage devices, Equipment for petroleum and natural gas industries, Iron and steel products, Seals, glands, Electrical accessories, Quality, Ergonomics, Welding, brazing and soldering, Aerospace fluid systems and components, Fasteners for aerospace construction, Insulating materials, Plant and equipment for the food industry, Fasteners, Tyres, Waxes, bituminous materials and other petroleum products, Vocabularies, Wastes, Soil quality. Pedology, Plastics, Shipbuilding and marine structures in general, Terminology (principles and coordination), Standardization. General rules, Services, Components for aerospace construction.

British Standards Institution (BSI), new liner

BS EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks. Lining with close-fit pipes
BS EN ISO 11296-3:2011 Plastics piping systems for renovation of under ground non-pressure drainage and sewerage networks. Lining with close-fit pipes
BS EN 13566-4:2003 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes
BS EN 13566-3:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes
BS EN 13566-4:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes
BS EN 13566-7:2007 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with spirally-wound pipes
BS EN 13566-3:2003 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with close fit pipes
BS EN ISO 11296-4:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes
BS EN 14408-3:2004 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
BS EN 14409-3:2004 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit pipes
BS EN ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Lining with close-fit pipes
BS EN ISO 56003:2021 Innovation management. Tools and methods for innovation partnership. Guidance
BIP 0140-2013 Understanding the new ISO Management System Requirements
BS CWA 16649:2013 Managing emerging technology-related risks
BS EN ISO 7662:1996 Rubber and plastics hoses - Determination of abrasion of lining
BS EN 15655-1:2018 Tracked Changes. Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings. Polyurethane lining of pipes and fittings
23/30402484 DC BS EN ISO 56008. Innovation management. Tools and methods for innovation operation measurements. Guidance
BS EN 2311:1990 Specification for bushes with self-lubricating liner - Technical specification
BS EN ISO 11299-2:2018 Plastics piping systems for renovation of underground gas supply networks - Lining with continuous pipes
BS 7892:2000 Specification for seal coats on cement mortar lined ductile iron pipes and fittings
BS ISO 56005:2020 Innovation management. Tools and methods for intellectual property management. Guidance
BS EN ISO 56005:2021 Innovation management. Tools and methods for intellectual property management. Guidance
BS ISO 56006:2021 Innovation management. Tools and methods for strategic intelligence management. Guidance
BS EN ISO 15463:2003 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
BS EN ISO 56007:2023 Innovation management. Tools and methods for managing opportunities and ideas. Guidance
19/30402776 DC BS EN 15655-2. Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings. Part 2. Thermoplastic Modified Polyolefin (TMPO) lining of pipes
22/30376049 DC BS EN ISO 56007. Innovation management. Tools and methods for idea management. Guidance
19/30359441 DC BS ISO 56005. Innovation management. Tools and methods for intellectual property management. Guidance
20/30357558 DC BS ISO 56006. Innovation management. Tools and methods for strategic intelligence management. Guidance
BS EN ISO 11298-2:2018 Plastics piping systems for renovation of underground water supply networks - Lining with continuous pipes
BS CWA 16833:2014 Glossary of Terms for Holistic Management of Brownfield Regeneration (GoT-HOMBRE)
BS EN ISO 28721-4:2012 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
BS ISO 16132:2004 Ductile iron pipes and fittings - Seal coats for cement mortar linings
BS 7855-1:1996 Metric rivets for the attachment of friction linings - Specification for semi-tubular rivets
BS EN 2288:1990 Specification for bushes flanged, corrosion resisting steel with self-lubricating liner - Dimensions and loads
BS EN 2311:2012 Aerospace series. Bushes with self-lubricating liner. Technical specification
BS EN 2287:2017 Aerospace series. Bush, plain, in corrosion resisting steel with self-lubricating liner. Dimensions and loads
BS EN 2285:1990 Specification for bushes plain, aluminium alloy with self-lubricating liner - Dimensions and loads
BS EN 2287:1990 Specification for bushes plain, corrosion resisting steel with self-lubricating liner - Dimensions and loads
BS EN 2311:2017 Aerospace series. Bushes with self-lubricating liner. Technical specification
BS EN ISO 11299-3:2018 Tracked Changes. Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes

US-FCR, new liner

FCR FED H-08-4 VOL 1 24A-1980 LEAD LINED BLOCK PARTITIONS IN NEW CONSTRUCTION
FCR UFGS-33 01 99-2009 SLIP LINING OF EXISTING PIPING
FCR UFGS-33 01 98-2013 SLIP LINING OF EXISTING PIPING FOR LEVEE APPLICATIONS

AT-ON, new liner

ONORM ISO 6600:1982 Ductile iron pipes; Centrifugal cement mortar lining; Compo- sition controls offreshly applied mortar
OENORM EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019)
OENORM EN 15655-2-2021 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
OENORM EN ISO 56005:2021 Innovation management - Tools and methods for intellectual property management - Guidance (ISO 56005:2020)

Association Francaise de Normalisation, new liner

NF T54-967-3:2005 Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes.
NF T54-967-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes.
NF P16-378-3*NF EN ISO 11297-3:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3 : lining with close-fit pipes
FD X50-271:2013 Management of innovation - Guidelines for implementing an innovation management approach
NF P16-378-2*NF EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2 : lining with continuous pipes
NF A48-902:1985 Foundry products. Ductile iron pipes for pressure pipelines. Contrifugal cement mortar internal lining. Composition controls of freshly applied mortar.
NF P16-364-4:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.
NF P16-364-2:2006 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : lining with continuous pipes.
NF P16-364-2*NF EN ISO 11296-2:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : Lining with continuous pipes
NF P16-364-3:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3 : lining with close-fit pipes.
NF P16-364-4*NF EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes
NF P16-378-4*NF EN ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4 : lining with cured-in-place pipes
NF M88-552:1982 New steel tanks with reinforced plastic lining for storing liquid petroleum products.
NF A49-190:1978 NON ALLIED STEEL SOCKETS FOR THREADED TUBES.
NF EN ISO 56003:2021 Management de l'innovation - Outils et méthodes pour les partenariats en innovation - Lignes directrices
NF A48-655-1*NF EN 15655-1:2018 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1 : polyurethane lining of pipes and fittings
NF X50-323*NF EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance
CWA 16649:2013 Managing emerging technology-related risks
NF X50-325*NF EN ISO 56005:2021 Innovation management - Tools and methods for intellectual property management - Guidance
NF X50-329*NF ISO 56006:2022 Innovation management - Tools and methods for strategic intelligence management - Guidance
NF EN ISO 56005:2021 Management de l'innovation - Outils et méthodes de management de la propriété intellectuelle - Recommandations
NF P16-364-4/A1*NF EN ISO 11296-4/A1:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes - Amendment 1 : updated definitions, marking requirements and procedure for alternative expression of flexural te
NF M87-220*NF EN ISO 15463:2004 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
NF EN ISO 21809-5:2017 Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées ou immergées utilisées dans les systèmes de transport par conduites - Partie 5 : revêtements externes en béton
NF T54-967-3*NF EN ISO 11298-3:2018 Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes
NF E29-828:1979 Pipeworks. Flexible metal hoses, double interlock, packingless, limited tightness circular section, in galvanized steel.
XP ISO/TS 30421:2022 Management des ressources humaines - Indicateurs de mesure pour le renouvellement et la rétention
NF T54-802:2019 Plastics - Liners for swimming pools made of plasticized poly(vinyl chloride) (PVC-P) membranes - Guidance for the installation, refurbishment, exploitation and maintenance
NF T54-966-3*NF EN ISO 11299-3:2018 Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, new liner

GB/T 17458-1998 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar

International Organization for Standardization (ISO), new liner

ISO 6600:1980 Ductile iron pipes; Centrifugal cement mortar lining; Composition controls of freshly applied mortar
ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes
ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes
ISO 11297-3:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
ISO 56003:2019 Innovation management — Tools and methods for innovation partnership — Guidance
ISO/DTS 56010 Innovation management - Illustrative examples of ISO 56000
ISO/DIS 56008 Innovation management — Tools and methods for innovation operation measurements — Guidance
ISO 7662:1988 Rubber and plastics hoses; determination of abrasion of lining
ISO 56006:2021 Innovation management — Tools and methods for strategic intelligence management — Guidance
ISO 56005:2020 Innovation management - Tools and methods for intellectual property management - Guidance
ISO/DTS 31050 Guidance for managing emerging risks to enhance resilience
ISO 15463:2003 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
ISO/FDIS 56007 Innovation management — Tools and methods for managing opportunities and ideas — Guidance
ISO 56007:2023 Innovation management — Tools and methods for managing opportunities and ideas — Guidance
ISO/TS 31050:2023 Risk management — Guidelines for managing emerging risk to enhance resilience
ISO 16132:2016 Ductile iron pipes and fittings - Seal coats for cement mortar linings
ISO 16132:2004 Ductile iron pipes and fittings - Seal coats for cement mortar linings
ISO 24131-2:2023 Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining
ISO/CD 11298-11:2023 Plastics piping systems for renovation of underground water supply networks — Part 11: Lining with inserted hoses
ISO 24131-1:2023 Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining
ISO 11298-2:2018 Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes
ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
ISO 11298-3:2018 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
ISO 15463:2003/cor 1:2009 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe; Technical Corrigendum 1

PL-PKN, new liner

PN H74109-1992 Ductile iron pipes Centrifugal cement mortar lining Composition controls of freshly applied mortar
PN C94301-08-1987 Retreading and repair of tyres and tubes Repair inserts for tyres
PN-EN ISO 56003-2021-07 E Innovation management -- Tools and methods for innovation partnership -- Guidance (ISO 56003:2019)
PN-EN 15655-2-2021-05 E Ductile iron pipes, fittings and accessories -- Requirements and test methods for organic linings of ductile iron pipes and fittings -- Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
PN-EN ISO 11296-4-2018-03/A1-2021-10 E Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks--Part 4: Lining with cured-in-place pipes--Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test r

CEN - European Committee for Standardization, new liner

EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes
EN ISO 11297-3:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
EN ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes
EN 15655-1:2018 Ductile iron pipes@ fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
PREN 15655-2016 Ductile iron pipes@ fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
EN 14408-3:2004 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
EN ISO 11298-3:2018 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes

RO-ASRO, new liner

STAS 1228/3-1985 Machine retaining devices RENEWABLE BUSHES FOR DRILLING DEVICES Dimensions

European Committee for Standardization (CEN), new liner

EN 13566-2:2005 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes
EN ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019)
EN 16506:2014 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
EN 15655-2:2020 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
prEN ISO 56008 Innovation management - tools and methods for innovation operation measurements - Guidance (ISO/DIS 56008:2023)
EN ISO 56005:2021 Innovation management - Tools and methods for intellectual property management - Guidance (ISO 56005:2020)
EN ISO 15463:2003 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
EN ISO 7662:1996 Rubber and Plastics Hoses - Determination of Abrasion of Lining ISO 7662: 1988
EN ISO 11298-2:2018 Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes
EN ISO 56007:2023 Innovation management - Tools and methods for managing opportunities and ideas - Guidance (ISO 56007:2023)
EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010)
EN 2311:2012 Aerospace series - Bushes with self-lubricating liner - Technical specification

Danish Standards Foundation, new liner

DS/EN ISO 11296-4:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
DS/EN ISO 7662:1996 Rubber and plastics hoses - Determination of abrasion of lining
DS/CWA 16649:2013 Managing emerging technology-related risks
DS/ISO 56005:2020 Innovation management – Tools and methods for intellectual property management – Guidance
DS/EN 15655:2009 Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
DS/EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
DS/ISO 11296-4:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 4: Lining with cured-in-place pipes – AMENDMENT 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test
DS/EN ISO 11296-4:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 4: Lining with cured-in-place pipes – Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test
DS/EN ISO 11299-3:2013 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
DS/EN ISO 15463/AC:2009 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
DS/EN ISO 15463:2004 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
DS/EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings
DS/EN ISO 11296-3:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes

IT-UNI, new liner

UNI EN ISO 11296-4:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
UNI EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance
UNI EN 15655-2-2020 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

German Institute for Standardization, new liner

DIN EN ISO 11297-3:2017 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO/DIS 11297-3:2017); German and English version prEN ISO 11297-3:2017
DIN EN ISO 11296-3:2017 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO/DIS 11296-3:2017); German and English version prEN ISO 11296-3:2017
DIN EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
DIN 2880:1999 Application of cement mortar lining for cast iron pipes, steel pipes and fittings
DIN EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
DIN 2880:1999-01 Application of cement mortar lining for cast iron pipes, steel pipes and fittings
DIN 7633:1985 Compression couplings with spherical liner; brazing nipples
DIN 7638:1985 Compression couplings with spherical liner; equal elbows
DIN EN ISO 56003:2021-08 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019); German version EN ISO 56003:2021
DIN EN 15655-1:2019 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
DIN EN 15655-1:2019-04 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings; German version EN 15655-1:2018
DIN EN 15655-1:2018 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings; German and English version prEN 15655-1:2017
DIN EN 13566-2:2006 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes; English version of DIN EN 13566-2:2006-02
DIN 7639:1985 Compression couplings with spherical liner; equal tees
DIN 7640:1985 Compression couplings with spherical liner; equal crosses
DIN 7633:2003 Compression fittings with spherical liners - Adapters for brazing
DIN EN ISO 56003:2020 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019); German and English version prEN ISO 56003:2020
DIN EN 15655-2:2021 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
DIN EN 15655-2:2021-01 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes; German version EN 15655-2:2020
DIN 7637:1985 Compression fittings with spherical liners; adaptars for welding
DIN 7644:1985 Compression couplings with spherical liner; male studed banjo bolts for ring type nipples
DIN SPEC 19748:2012 Requirements for lining with cured-in-place pipes for renovation of drains connected to premises
DIN EN 60684-3-233:2006 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006
DIN EN ISO 7662:1996-08 Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996
DIN EN ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013); German version EN ISO 11297-3:2013
DIN 2875:2002-06 Flanged steel pipes and fittings with hard or soft rubber linings - Technical delivery conditions
DIN 20021:1997 Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857
DIN EN 60684-3-233 Berichtigung 1:2008 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006, Co
DIN EN ISO 11299-3:2019-04 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018); German version EN ISO 11299-3:2018 / Note: This standard is part of the DVGW body of rules.
DIN EN ISO 15463:2010-08 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003 + Cor. 1:2009); English version EN ISO 15463:2003 + AC:2009, only on CD-ROM
DIN EN ISO 11299-3:2019 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
DIN EN ISO 11299-2:2019-04 Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018); German version EN ISO 11299-2:2018 / Note: This standard is part of the DVGW body of rules.
DIN EN ISO 11296-4/A1:2020 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test
DIN 2876:2002 Flanged steel pipes and flanged steel fittings glass lined - Technical specifications
DIN 2873:2002 Flanged fitting pipes and flanged steel glass lined - PN 10 and PN 25
DIN 3236-1:1994 Straight pattern valves with flange socket placed in shunt - Part 1: Without lining

Underwriters Laboratories (UL), new liner

UL 19-1992 Lined fire hose and hose assemblies
UL 219-1993 UL Standard for Safety Lined Fire Hose for Interior Standpipes (Second Edition)
UL 219-2006 UL Standard for Safety Lined Fire Hose for Interior Standpipes (Third Edition)

American Society of Mechanical Engineers (ASME), new liner

ASME B16.20-2017 Metallic Gaskets for Pipe Flanges

GB-REG, new liner

REG UFGS-33 01 99-2009 SLIP LINING OF EXISTING PIPING
REG UFGS-33 01 98-2013 SLIP LINING OF EXISTING PIPING FOR LEVEE APPLICATIONS

Korean Agency for Technology and Standards (KATS), new liner

KS D 4316-2012(2022) Mortar lining for ductile iron pipes & fittings
KS D 4316-2012 Mortar lining for ductile iron pipes & fittings
KS D 3761-2019 Unplasticized polyvinyl chloride lining steel pipes
KS A ISO 56003:2022 Innovation management — Tools and methods for innovation partnership — Guidance
KS M ISO 7662:2003 Rubber and plastic hoses－Determination of abrasion of lining
KS M 3403-1981(1997) RIGID POLYVINYL CHLORIDE PIPE FOR SAEMAEOL WATER WORK SERVICE
KS M 3550-6-2011(2021) Polyethylene liner tube for renovation of existing potable water piping system
KS A ISO 56005:2022 Innovation management — Tools and methods for intellectual property management — Guidance
KS B ISO 16132:2005 Ductile iron pipes and fittings-Seal coats for cement mortar linings

National Aeronautics and Space Administration (NASA), new liner

NASA UFGS-22 05 83.63-2010 CURED-IN-PLACE PIPE (CIPP) LINING

The Society for Protective Coatings (SSPC), new liner

SSPC PA 8-2003 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels (NACE NO. 10)

SSPC - The Society for Protective Coatings, new liner

PA 8-2003 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels (NACE NO. 10)

GOSTR, new liner

GOST R 57315-2016 Innovation management. Guidelines for implementing an open innovation approach
PNST 451.2-2020 Innovation management. Product management. Part 2. Product innovation implementation in the organizations activity
GOST R ISO 56003-2020 Innovation management. Tools and methods for innovation partnership. Guidance
GOST R 59051-2020 Innovation management. Ethical essessment of research and innovation. Part 2. Ethical influence essessment
PNST 451.1-2020 Innovation management. Product management. Part 1. Organization framework development based on generic and extended self-assessment innovation activity
GOST R 59050-2020 Innovation management. Ethical essessment of research and innovation. Part 1. Ethical committee authorities

CZ-CSN, new liner

CSN 37 0192-1985 Double ncck bushes of glands for elcctrical cablcs
CSN 38 1946-1962 Bushing boards for prismatic bushings up to 1 kV and conductors up to 63x10 mm
CSN 38 1949-1962 Bushing boards for prismatic bushings up to 1 kV and 3 conductors up to 2x100x10 mm

SE-SIS, new liner

SIS SS 3134-1984 Metallic spiral-wound gaskets for pipe flanges
SIS SS 3134-1987 Pipe flanges - Sealing devices - Metallic spiral wound gaskets for flat face flanges

CH-SNV, new liner

SN EN ISO 11296-4/A1:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO
SN EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019)

未注明发布机构, new liner

DIN:2880 Application of cement mortar lining for cast iron pipes, steel pipes and fittings
BS ISO 56003:2019 Innovation management — Tools and methods for innovation partnership — Guidance
BS EN ISO 15463:2003(2010) Petroleum and natural gas industries — Field inspection of new casing, tubing and plain - end drill pipe
DIN EN ISO 11298-4:2022 Plastic piping systems for the renovation of buried water supply networks – Part 4: Cure-in-place tube lining (ISO 11298-4:2021)

ZA-SANS, new liner

SANS 1201:2005 The application of rubber linings to pipes, pipe fittings and vessels
SANS 1178:2002 The production of lined and coated steel pipes using bitumen or coal tar enamel
SANS 16132:2010 Ductile iron pipes and fittings - Seal coats for cement mortar linings

CN-STDBOOK, new liner

图书 3-9509 QFD innovative quality control circle--a new model of satisfaction perception realization and systematic innovation
图书 3-9970 Building Dreams, High Quality Leads to a New Life, Shanghai Metro Quality Management Model Leading to a New Urban Life (paperback)

Professional Standard - Petroleum, new liner

SY/T 0316-1997 Recommended practice for field inspection of new line pipe
SY/T 0316-2012 Recommended practice for field inspection of new line pipe
SY 0316-2012 Recommended Practice for Field Inspection of New Linepipe

American Society for Testing and Materials (ASTM), new liner

ASTM C541-98(2002)e1 Standard Specification for Linings for Asbestos-Cement Pipe
ASTM C12-06 Standard Practice for Installing Vitrified Clay Pipe Lines
ASTM F3182-16 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water
ASTM C541/C541M-98(2011)e1 Standard Specification for Linings for Asbestos-Cement Pipe
ASTM C12-07 Standard Practice for Installing Vitrified Clay Pipe Lines
ASTM C541/C541M-98(2019) Standard Specification for Linings for Asbestos-Cement Pipe (Withdrawn 2022)
ASTM F2207-06(2013) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
ASTM F2207-06(2019) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
ASTM F1476-01(2006) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F1476-01 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F1336-02 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F1336-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F1476-07 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F477-02e1 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F1545-97(2003) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1545-97 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1545-97e1 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1476-07(2013) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F1545-97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM C1540-11 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM F1545-15 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1545-15a Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1545-15a(2021) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM C1208/C1208M-16a Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
ASTM C1208/C1208M-16 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
ASTM F1548-01(2006) Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F1548-01 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F1548-94 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F1697-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
ASTM A888-03 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM A849-10 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
ASTM A849-15(2021) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
ASTM A849-15 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
ASTM F1697-09(2015) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

Defense Logistics Agency, new liner

DLA AN901 REV 9-2006 GASKET - METAL TUBE CONNECTION SEAL
DLA MIL-DTL-38726 A-2002 ADAPTER ASSEMBLY, REUSEABLE, FLEXIBLE HOSE, LOW PRESSURE

Professional Standard - Aviation, new liner

HB 9-3-1983 Liner disc connector of wave-proof sleeve for conductor
HB 9-3-1968 The liner joint of the anti-wave sleeve of the wire

PH-BPS, new liner

PNS ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance

KR-KS, new liner

KS A ISO 56003-2022 Innovation management — Tools and methods for innovation partnership — Guidance
KS A ISO 56005-2022 Innovation management — Tools and methods for intellectual property management — Guidance

ES-UNE, new liner

UNE-EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019)
UNE-EN 15655-1:2019 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
UNE-EN 15655-2:2021 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
UNE-EN ISO 11296-4:2018/A1:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural t...
UNE-EN ISO 15463:2003/AC:2009 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003/Cor 1:2009) (Endorsed by AENOR in December of 2009.)
UNE-EN ISO 15463:2003 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003) (Endorsed by AENOR in March of 2004.)
UNE-EN ISO 11299-2:2021 Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)

Standard Association of Australia （SAA）, new liner

AS ISO 56003:2020 Innovation management — Tools and methods for innovation partnership — Guidance
AS 1180.10A:1974 Methods of test for hose made from elastomeric materials - Resistance of hose lining or cover to flame
AS 1528.4:2001 Tubes (stainless steel) and tube fittings for the food industry - Clamp liners with gaskets
AS/NZS ISO 11299.2:2023 Plastics piping systems for renovation of underground gas supply networks, Part 2: Lining with continuous pipes
AS 1180.8B:1972 Methods of test for hose made from elastomeric materials - Resistance to cold flexing of hose lining and cover
AS/NZS ISO 11298.2:2023 Plastics piping systems for renovation of underground water supply networks, Part 2: Lining with continuous pipes
AS 1180.7A:1972 Methods of test for hose made from elastomeric materials Resistance of hose lining and cover to liquids
AS/NZS ISO 11299.3:2023 Plastics piping systems for renovation of underground gas supply networks, Part 3: Lining with close-fit pipes
AS 1180.7F:1972 Methods of test for hose made from elastomeric materials - Resistance of lining and cover to ozone

American Water Works Association (AWWA), new liner

AWWA C104/A21.4-1995 Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
AWWA C104/A21.4-2013 Cement-Mortar Lining for Ductile-Iron Pipe and Fittings
AWWA C104/A21.4 ERTA-2010 Cement朚ortar Lining for Ductile-Iron Pipe and Fittings
AWWA C210-2015 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings
AWWA C620-2007 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger
AWWA C602-2011 Cement-Mortar Lining of Water Pipelines in Place-4 In. (100 mm) and Larger

American National Standards Institute （ANSI), new liner

ANSI/UL 19-2013 Standard for Safety for Lined Fire Hose and Hose Assemblies
ANSI/AWS D10.11M/D10.11:2007 Guide for Root Pass Welding of Pipe Without Backing
ANSI/UL 219a-2013 Standard for Safety for Lined Fire Hose for Interior Standpipes
ANSI/UL 219-2013 Standard for Safety for Lined Fire Hose for Interior Standpipes
ANSI/ASTM F2207:2006 Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes
ANSI/AWWA C224-2017 Nylon-11-Based Polyamide Coatings and Linings for Steel Water Pipe and Fittings
ANSI/ASTM F1545:1996 Specification For Plastic-lined Ferrous Metal Pipe, Fittings, And Flanges
ANSI/AWWA C213-2015 Fusion-Bonded Epoxy Coatings and Linings for Steel Water Pipe and fittings
ANSI/AWWA C210-2015 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings
ANSI/ASTM F1476:2007 Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ANSI/UL 213a-2013 Standard for Safety for Rubber Gasketed Fittings for Fire-Protection Service
ANSI/UL 213-2013 Standard for Safety for Rubber Gasketed Fittings for Fire-Protection Service
ANSI/ASTM F1697:2009 Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
ANSI/ASTM F1548:2001 Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ANSI/AWWA C602-2011 Cement Mortar Lining of Water Pipelines in Place-4 In. (100 mm) and Larger
ANSI/ASTM F2599:2011 Practice for the Sectional Repair of Damaged Pipe by Means of an Inverted Cured-In-Place Liner

RU-GOST R, new liner

GOST R 57272.2-2016 Risk management of new technologies using. Part 2. Application to new technologies
GOST R 57272.3-2016 Risk management of new technologies using. Part 3. Application to new materials and products
GOST R 57272.4-2016 Risk management of new technologies using. Part 4. Application to new production and production networks
GOST R 57272.1-2016 Risk management of new technologies using. Part 1. General requirements
GOST R 55901-2013 Guidelines for the justification and development of management system standards in the sphere of innovation activities

Society of Automotive Engineers (SAE), new liner

SAE RS-684-1-1969 RS684 Spring Clips and Bushes for use with Rigid Tubes
SAE AS14238C-2014 BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE
SAE AS38404-2013 Couplings, Hose, Reattachable Screw-On
SAE AS1553A-2000 Performance Standard for Tube Support Loop-Cushioned Clamp
SAE AS14238B-2003 Bushing, Sleeve Flanged, Press Fit, Ream Type FSC 3120
SAE AS4468C-2007 Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification
SAE AS5503A-2007 HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER

AENOR, new liner

UNE-EN 16506:2015 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
UNE-EN 15655:2009 Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
UNE-EN ISO 7662:1997 RUBBER AND PLASTICS HOSES. DETERMINATION OF ABRASION OF LINING. (ISO 7662:1988).
UNE-EN ISO 11299-3:2014 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011)

IETF - Internet Engineering Task Force, new liner

RFC 6402-2011 Certificate Management over CMS (CMC) Updates

BR-ABNT, new liner

ABNT CB-67-1979

Lithuanian Standards Office , new liner

LST EN ISO 56003:2021 Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019)
LST EN 15655-2-2021 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
LST EN 15655-2009 Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
LST EN ISO 7662:2001 Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988)
LST EN 14408-3-2005 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
LST EN 13090-2002 Means for resealing threaded joints of gas pipework in buildings
LST EN ISO 11296-4/A1:2021 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test

National Association of Corrosion Engineers (NACE), new liner

NACE NO.11-2003 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels (SSPC-PA 8; Item No. 21099)

General Motors do Brasil, new liner

GMSA LTP .PE.110-2011 Test method for determining the weight per unit area of the backing of PVC 鈥?coated Determina莽茫o do peso por unidade de 谩rea da base de materiais vin铆licos Do Not use on New Programs; No Replacement

Group Standards of the People's Republic of China, new liner

T/CACE 020-2020 Technical requirements for imported used tubing for remanufacturing: ceramic lined tubing
T/ZEEDA 001-2021 The Valet-Style Technological Service Guide for Companies of Innovation and Entrepreneurship
T/ZSA 100-2021 The Valet-Style technological service guide for companies of innovation and entrepreneurship

(U.S.) Plastic Pipe Association, new liner

PPI TR-34-2007 Effects of Disinfection on Newly Constructed Polyethylene Water Mains

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., new liner

ASHRAE DA-07-062-2007 Development of a New Energy Management Programming Tool@ TSC
ASHRAE HI-02-10-2-2002 A Preview of ASHRAE's New and Revised Smoke Management Book (RP-1122)
ASHRAE 4189-1998 New Insights into the Behavior of the Metastable Region of an Operating Capillary Tube (The Full Text of This Paper can be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 4@ Number 1@ January
ASHRAE 4085-1997 New Method to Estimate the Thermal Contact Resistance in Finned-Tube Heat Exchangers

API - American Petroleum Institute, new liner

API RP 15CLT-2007 Recommended Practice for Composite Lined Steel Tubular Goods (FIRST EDITION)
API RP 5A5-1986 RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW CASING@ TUBING@ AND PLAIN-END DRILL PIPE
API BULL D17-1983 RUNNING AND CEMENTING LINERS IN THE DELAWARE BASIN@ TEXAS SECOND EDITION
API RP 5A5-1983 RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW CASING@ TUBING@ AND PLAIN-END DRILL PIPE FIRST EDITION
API RP 5A5-1982 RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW CASING@ TUBING@ AND PLAIN-END DRILL PIPE (Section 6)
API RP 5A5-1989 RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW CASING@ TUBING@ AND PLAIN-END DRILL PIPE FOURTH EDITION
API RP 5A5-1987 RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW CASING@ TUBING@ AND PLAIN-END DRILL PIPE THIRD EDITION
API RP 5A5 CHINESE-2005 Field Inspection of New Casing@ Tubing@ and Plain-end Drill Pipe (SEVENTH EDITION; ERTA: December 2009)
API RP 5A5-2005 Field Inspection of New Casing@ Tubing@ and Plain-end Drill Pipe (SEVENTH EDITION; ERTA: December 2009)
API RP 1169-2013 Recommended Practice for Basic Inspection Requirements-New Pipeline Construction (FIRST EDITION)

YU-JUS, new liner

JUS M.B6.952-1987 Pneumatic tubing. Taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.949-1985 Pneumatic tubing. Taper bush type tube unions for butt joints. Shape and dimensions
JUS M.B6.955-1989 Pneurnatic tubing. Reducing taper bush type unions for butt joints, Shape and dimensions
JUS M.B6.950-1987 Pneumatic tubing. Taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.954-1989 Pneumatic tubing. Reducing taper bush type tube unions for butt joints. Shape and dimensions
JUS M.B6.953-1987 Pneumatic tubing. Taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.951-1987 Pneumatic tubing. Taper bush type tube unions for butt/oints. Shape and dimensions
JUS M.B6.957-1989 Pneumatic tubing. Taper bush type tube unions for buttjoints. Extended elbom. Shape and dimensions
JUS M.B6.967-1989 Pneumatic tubing. Taper bush type tube unions for butt joints. Longer K-type tee. Shape and dimen-sions

HU-MSZT, new liner

MSZ 5185-1971

GM North America, new liner

GM GM3804M-2011 Unexposed Exterior Adhesive Backed Films (Issue 3; Do Not Use on New Programs; Replaced by GMW14874)
GM GM6089M-2001 (Inactive for Design)Automotive Brake Hose Use GMW3056 for New Design

U.S. Military Regulations and Norms, new liner

ARMY A-A-52517 VALID NOTICE 1-2004 PATCH, REPAIR, FOR INNER TUBES AND TUBELESS TIRE LINERS (METRIC)
ARMY A-A-52517-1995 PATCH, REPAIR, FOR INNER TUBES AND TUBELESS TIRE LINERS (METRIC)

ESDU - Engineering Sciences Data Unit, new liner

ESDU 00012 A-2005 The acoustic attenuation of absorbent linings in cylindrical flow ducts.
ESDU 00012 B-2010 The acoustic attenuation of absorbent linings in cylindrical flow ducts

Canadian Standards Association (CSA), new liner

CSA C22.2 NO.45.1-2007 Conduits métalliques rigides en acier pour canalisations électriques (deuxième édition; Mise à jour no. 1: Novembre 2010; Mise à jour no. 2: Novembre 2014)
CSA Z264.1-2002 Tubes espaceurs et chambres d’inhalation pour les aérosols-doseurs (Première édition; Mise à jour no 1: Octobre 2003; Mise à jour no 2: Février 2008)
CSA B602-99-CAN/CSA-1999 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe Third Edition; General Instruction No 1; Update No 3

SAE - SAE International, new liner

SAE R-405-2011 Integrated Vehicle Health Management Perspectives on an Emerging Field
SAE AS4468B-2003 Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification
SAE AS5503B-2018 HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER

International Federation of Trucks and Engines, new liner

NAVISTAR ESP L-5.221-NPP-2015 VOID - Hi-Duty Tube Components - Not Preferred For New Design

Shanxi Provincial Standard of the People's Republic of China, new liner

DB14/T 1426-2017 Main component traceability management specification for elevator renewal

International Telecommunication Union (ITU), new liner

ITU-R SM.1603-2-2014 Spectrum redeployment as a method of national spectrum management
ITU-R SM.1603-2003 Spectrum redeployment as a method of national spectrum management
ITU-R SM.1604 FRENCH-2003 Guidelines for an upgraded spectrum management system for developing countries
ITU-R SM.1604 SPANISH-2003 Guidelines for an upgraded spectrum management system for developing countries

Alliance of Telecommunications Industry Solutions （ATIS), new liner

ATIS 0300089-2015 P-ANI Administration Guidelines (Reissued with the resolution of Issue 785)

ATIS - Alliance for Telecommunications Industry Solutions, new liner

0300089-2015 P-ANI Administration Guidelines (Reissued with the resolution of Issue 798)
0300089-2013 P-ANI Administration Guidelines (Reissued with the resolution of Issue 659)
0300089-2014 P-ANI Administration Guidelines (Reissued with the resolution of Issue 659)

SG-SPRING SG, new liner

TR 6-2001 PIPELINE SERVICE CORRIDORS Design, construction and operation of pipeline service corridors in Singapore

American Petroleum Institute (API), new liner

ANSI/API RP 5A5:2005(2021) Field Inspection of New Casing@ Tubing@ and Plain-end Drill Pipe (SEVENTH EDITION; ERTA: December 2009)