ZH
RU
ES

Eruption along the river

Eruption along the river, Total:379 items.

In the international standard classification, Eruption along the river involves: Internal combustion engines for road vehicles, Shipbuilding and marine structures in general, Aerosol containers, Pesticides and other agrochemicals, Internal combustion engines, Integrated circuits. Microelectronics, Fuels, Aerospace engines and propulsion systems, Pipeline components and pipelines, Road vehicle systems, Iron and steel products, Semiconductor devices, Protection against fire, Diagnostic, maintenance and test equipment, Lubricants, industrial oils and related products, Paint ingredients, Structure and structure elements, Ground service and maintenance equipment, Agricultural machines, implements and equipment, Environmental protection, Water quality, Petroleum products in general, Products of the chemical industry, Analytical chemistry, Paints and varnishes, Burners. Boilers, Items of art and handicrafts.

RO-ASRO, Eruption along the river

STAS 6582-1987 INJECTION PUMPS ON LINE FOR COMPRESSION IGNITION ENGINES Numbering of pumping sections
STAS 7580-1966
STAS 8943-1980 TURBO-JET FUEL Determination of the corrosion to silver
STAS 8611-1987 FUELS FOR TURBO-JET ENGINES Determination of mechanical impurities
STAS 10539-1976 FUELS FOR JET ENGINES Determination of naphtalenic hydrocarbons by the spectrophotometric method
STAS 10472-1975 FUELS FOR JET ENGINES Determination of naphthenic soap content by filtration (by nitrocellulose filter)
STAS SR EN 26246-1996 Petroleum products - Motor gasoline and aviation fuels - Determination of existent gum - Jet evaporation rnethod (ISO 6248:1981)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Eruption along the river

ASHRAE 3845-1995 Evaporation Heat Transfer Performance of Nozzle-Sprayed Ammonia on a Horizontal Tube
ASHRAE 4059-1997 Performance of Nozzle-Sprayed Ammonia Evaporator with Square-Pitch Plain-Tube Bundle (RP 725)
ASHRAE 3800-1994 Spray Evaporation Heat Transfer of R-134A on Plain Tubes
ASHRAE 4008-1996 Spray Evaporation Heat Transfer Performance of R-123 in Tube Bundles (RP-668)
ASHRAE 4109-1998 Ammonia Spray Evaporation Heat Transfer Performance of Single Low-Fin and Corrugated Tubes (RP-725)
ASHRAE 3917-1995 Effects of Nozzle Height and Orifice Size on Spray Evaporation Heat Transfer Performance for a Low-Finned@ Triangular-Pitch Tube Bundle with R-134a
ASHRAE 3843-1995 Heat Transfer of R-134a in Single-Tube Spray Evaporation Including Lubricant Effects and Enhanced Surface Results
ASHRAE 3974-1996 Effect of Lubricant on Spray Evaporation Heat Transfer Performance of R-134a and R-22 in Tube Bundles (RP-668)
ASHRAE 3916-1995 Effects of Surface Enhancement@ Film-Feed Supply Rate@ and Bundle Geometry on Spray Evaporation Heat Transfer Performance

Defense Logistics Agency, Eruption along the river

DLA DSCC-VID-V62/08617 REV A-2009 MICROCIRCUIT, DIGITAL, SINGLE POSITIVE EDGE TRIGGRERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET, MONOLITHIC SILICON
DLA SMD-5962-97616 REV C-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, DUAL POSITIVE EDGE-TRIGGERED D-TYPE FLIP FLOP WITH CLEAR AND PRESET, MONOLITHIC SILICON
DLA DSCC-VID-V62/04663 REV A-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04668 REV A-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-97574 REV D-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-97576 REV C-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96860 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET, MONOLITHIC SILICON
DLA SMD-5962-96854 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96864 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGHSPEED CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/03603 REV A-2009 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16- BIT D-TYPE EDGE-TRIGGERED FLIP-FLOP WITH 3-STATE OUTPUTS, TTL COMPATIBLE, MONOLITHIC SILICON
DLA DSCC-VID-V62/04676 REV A-2010 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-92025 REV B-2011 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE, INPUTS, MONOLITHIC SILICON
DLA SMD-5962-97616 REV B-2003 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, DUAL POSITIVE EDGE-TRIGGERED D-TYPE FLIP FLOP WITH CLEAR AND PRESET, MONOLITHIC SILICON
DLA DSCC-VID-V62/04725 REV A-2011 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-90910 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCE SCHOTTKY, TTL, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLOCK ENABLE, MONOLITHIC SILICON
DLA SMD-5962-88728 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, OCTAL D-TYPE EDGE TRIGGERED FLIP-FLOPS, MONOLITHIC SILICON
DLA SMD-5962-93201 REV C-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93148 REV B-2008 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLOCK ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96865 REV C-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGHSPEED CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93220 REV D-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/03659 REV A-2009 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93148 REV C-2013 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLOCK ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-84011 REV G-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW-POWER SCHOTTKY TTL, DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOPS WITH CLEAR AND RESET, MONOLITHIC SILICON
DLA SMD-5962-97590 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED SCHOTTKY TTL, OCTAL EDGE TRIGGERED D-TYPE FLIP FLOPS WITH THREE STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-95647 REV C-2008 MICROCIRCUIT, DIGITAL, ADVANCED BICMOS, 3.3 V 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOPS WITH BUS HOLD, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96861 REV B-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-90747 REV B-1995 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, TTL COMPATIBLE, OCTAL D-TYPE EDGE TRIGGERED FLIP-FLOP, MONOLITHIC SILICON
DLA SMD-5962-98627 REV A-2007 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS W/CLEAR AND PRESET, MONOLITHIC SILICON
DLA SMD-5962-97592 REV A-2007 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS W/CLEAR AND PRESET, MONOLITHIC SILICON
DLA SMD-5962-98542 REV A-2003 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3 VOLT 16-BIT EDGE-TRIGGERED D-TYPE FLIP FLOP WITH BUS HOLD, EQUIVALENT 22 OHMS SERIES OUTPUT RESISTORS, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

British Standards Institution (BSI), Eruption along the river

BS ISO 22561:2020 Gasoline engines with direct fuel injection (GDI engines). Installation of the injectors to the engine
BS ISO 14681:1998 Diesel engines - Fuel injection pump testing - Calibrating fuel injectors
BS ISO 19724:2020 Gasoline engines with direct injection. Cleanliness assessment of fuel injection equipment
BS ISO 19724:2016 Gasoline engines with direct injection. Cleanliness assessment of fuel injection equipment
BS ISO 7026:1998 Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
BS EN ISO 6246:2017+A1:2019 Petroleum products. Gum content of fuels. Jet evaporation method
BS ISO 12345:2013 Diesel engines. Cleanliness assessment of fuel injection equipment
BS ISO 12251:2017 Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions
BS ISO 21042:2018 Gasoline engines with direct fuel injection (GDI engines). Installation of the high pressure fuel pump to the engine
BS ISO 8535-2:2003 Compression ignition engines. Steel tubes for high pressure fuel injection pipes - Requirements for composite tubes
20/30411214 DC BS ISO 12345. Diesel engines. Cleanliness assessment of fuel injection equipment
BS ISO 8535-2:2004 Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for composite tubes
BS ISO 7879:1997 Diesel engines. Cradle mounted in-line fuel injection pumps. Mounting dimensions
BS ISO 12345:2021 Tracked Changes. Diesel engines. Cleanliness assessment of fuel injection equipment
BS ISO 13555-1:2003 Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Preconditioning
BS EN ISO 6246:1998 Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method
BS ISO 8535-1:2016 Diesel engines. Steel tubes for high-pressure fuel injection pipes - Requirements for seamless cold-drawn single-wall tubes
BS ISO 13555-3:2004 Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Validation of timing devices
BS ISO 2974:2018 Tracked Changes. Diesel engines. 60$0D female cones for high-pressure fuel injection components
BS ISO 7612:2018 Tracked Changes. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
17/30338129 DC BS EN 16712-4. Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Portable foam generators. Part 4. High expansion foam generators PN16
BS ISO 7299-2:2021 Tracked Changes. Diesel engines. End-mounting flanges for pumps. High-pressure supply pumps for common rail fuel injection systems
20/30385875 DC BS ISO 7299-2. Diesel engines. End-mounting flanges for pumps - Part 2. High-pressure supply pumps for common rail fuel injection systems
BS EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Portable foam equipment. High expansion foam generators PN16

Korean Agency for Technology and Standards (KATS), Eruption along the river

KS V 4332-2013 Fuel injector of marine small diesel engine
KS M ISO 6246:2018 Petroleum products — Gum content of fuels — Jet evaporation method
KS I 4012-2019 Test methods for remanufactured mechanical fuel injection pump of diesel engines
KS R ISO 6519:2018 Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
KS R ISO 2974:2020 Diesel engines — 60° female cones for high-pressure fuel injection components
KS R 3048-1999(2004) Diesel engines－Tapers for shaft ends of fuel injection pumps and hubs
KS M ISO 6246:2012 Petroleum products－Gum content of light and middle distillate fuels－Jet evaporation method
KS R 3045-3-1999(2004) Diesel engines－Mounting dimensions of fuel injection pumps－Part 3：Flanges for end flange-mounted pumps
KS R 3045-2-1999(2004) Diesel engines－Mounting dimensions of fuel injection pumps－Part 2：Base-mounted in-line pumps

International Organization for Standardization (ISO), Eruption along the river

ISO 19724:2020 Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment
ISO 19724:2016 Gasoline engines with direct injection - Cleanliness assessment of fuel injection equipment
ISO 21042:2018 Gasoline engines with direct fuel injection (GDI engines) - Installation of the high pressure fuel pump to the engine
ISO 12345:2013 Diesel engines - Cleanliness assessment of fuel injection equipment
ISO 2974:2016 Diesel engines - 60° female cones for high-pressure fuel injection components
ISO 12345:2002 Diesel engines - Cleanliness assessment of fuel injection equipment
ISO 12345:2021 Diesel engines — Cleanliness assessment of fuel injection equipment
ISO 2974:2018 Diesel engines - 60° female cones for high-pressure fuel injection components
ISO 2698:2013 Diesel engines.Clamp-mounted fuel injectors, types 7 and 28
ISO 12251:2011 Diesel engines.Clamp mounted CR fuel injectors.Mounting dimensions
ISO 12251:2017 Diesel engines - Clamp mounted CR fuel injectors - Mounting dimensions
ISO 6246:1995 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method
ISO 6246:1981 Petroleum products — Motor gasoline and aviation fuels — Determination of existent gum — Jet evaporation method
ISO 8535-2:2003 Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
ISO 8535-2:1993 Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes
ISO 13555-1:2003 Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 1: Preconditioning
ISO 6246:1995/Cor 1:1998 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method; Technical Corrigendum 1
ISO 13555-2:2003 Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 2: Test method
ISO 8535-1:1996 Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
ISO 8535-1:1990 Compression-ignition engines; steel tubes for high-pressure fuel injection pipes; part 1: requirements for seamless cold-drawn single-wall tubes
ISO 13555-3:2004 Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 3: Validation of timing measurement devices
ISO 8535-1:2006 Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
ISO 8535-1:2011 Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
ISO 8535-1:1989 Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall steel tubes
ISO 8535-1:1990/Amd 1:1993 Compression-ignition engines; steel tubes for high-pressure fuel injection pipes; part 1: requirements for seamless cold-drawn single-wall tubes; amendment 1

Association Francaise de Normalisation, Eruption along the river

NF H44-027:1991 Aerosol generators. Estimation of the shape of the sprays.
NF EN ISO 6246:2018 Produits pétroliers - Teneur en gommes des carburants - Méthode d'évaporation au jet
NF R16-331*NF ISO 8356:1986 Road vehicles. Diesel engines. Screw-in injector, type 22.
NF R16-340*NF ISO 9102:2003 Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1
NF EN 226:1988 Brûleurs à fioul à pulvérisation - Dimensions de liaison entre brûleur et générateur de chaleur.
NF M07-004:1998 Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method.
NF M07-004/A1*NF EN ISO 6246/A1:2019 Petroleum products - Gum content of fuels - Jet evaporation method - AMENDMENT 1 : purity requirement for n-heptane
NF EN ISO 6246/A1:2019 Produits pétroliers - Teneur en gommes des carburants - Méthode d'évaporation au jet - AMENDEMENT 1 : exigences de pureté pour le n-heptane
NF S61-822-4*NF EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam generators - Part 4 : high expansion foam generators PN16
NF ISO 2699:1997 Moteurs diesels - Porte-injecteurs de combustible complets de taille "S", à fixation par bride - Types 2, 3, 4, 5 et 6.
NF EN ISO 20844:2015 Pétrole et produits connexes - Détermination de la stabilité au cisaillement de fluides contenant des polymères au moyen d'un injecteur pour moteur diesel
NF ISO 8984-1:1997 Moteurs diesels - Essais des porte-injecteurs de combustible complets - Partie 1 : appareillage d'essai et de réglage à levier de commande manuel.
NF EN 16712-4:2018 Équipement portable de projection d'agents d'extinction alimenté par des pompes à usage incendie - Équipements mousse portables - Partie 4 : générateurs de mousse PN 16 haut foisonnement
NF EN 14275:2013 Carburants pour automobiles - Évaluation de la qualité de l'essence et du carburant pour moteur diesel (gazole) - Échantillonnage au pistolet de distribution des pompes de stations-service des réseaux et des pompes privées hors réseaux

ZA-SANS, Eruption along the river

SANS 5571:2007 Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of non-volatile content

AR-IRAM, Eruption along the river

IRAM 6549-1959

United States Navy, Eruption along the river

NAVY MIL-T-85630 VALID NOTICE 1-1991 TUBE, MOTOR, FOR 2.75 INCH ROCKET, MARK 66
NAVY MIL-T-85630-1983 TUBE, MOTOR, FOR 2.75 INCH ROCKET, MARK 66
NAVY MIL-E-5007 D (3)-1995 ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR
NAVY MIL-E-005007 E-1983 ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR
NAVY MIL-E-5007 D-1973 ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR
NAVY MIL-H-18911 A REINST NOTICE 2-1990 HEADS AND MOTORS, ROCKET, INERT PARTS, PAINTING AND MARKING
NAVY MIL-H-18911 A-1974 HEADS AND MOTORS, ROCKET, INERT PARTS, PAINTING AND MARKING
NAVY MIL-P-82522 C-1990 PROPELLANT, JET ENGINE, T-H DIMER, GRADE RJ-4
NAVY MIL-E-5007 D NOTICE 1-1997 ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-E-005007 E]
NAVY QPL-20627-QPD-2011 FILTER ASSEMBLY AND FILTER ELEMENTS, FLUID, PRESSURE (FOR ENGINES WITH LIQUID FUEL INJECTION SYSTEMS)
NAVY MIL-STD-1322-103-1991 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT ROCKET MOTORS, JATO MK 128 MOD 1
NAVY QPL-20627-QPD-2010 FILTER ASSEMBLY AND FILTER ELEMENTS, FLUID, PRESSURE (FOR ENGINES WITH LIQUID FUEL INJECTION SYSTEMS)
NAVY MIL-STD-1322-80-1986 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT MK 117 JATO ROCKET MOTOR IN WOOD BOX

Society of Automotive Engineers (SAE), Eruption along the river

SAE ARP246-1949 NUMBERING POSITIONS FOR NOZZLES, BURNERS, ETC. FOR TURBO-JET AND TURBO-PROP ENGINES
SAE AIR1627-1989 Methods for Determining Turbine Engine Nozzle Area
SAE AIR1147-1991 ELECTROMAGNETIC INTERFERENCE ON AIRCRAFT FROM JET ENGINE CHARGING
SAE AIR1147A-2013 Electromagnetic Interference on Aircraft from Jet Engine Charging
SAE AIR1147B-2022 Electromagnetic Interference on Aircraft from Jet Engine Charging
SAE ARP4865A-2013 Gas Turbine Engine Fuel Nozzle Test Procedures
SAE J1958-2002 Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
SAE AIR1191A-1999 Performance of Low Pressure Ratio Ejectors for Engine Nacelle Cooling
SAE AIR1191-1989 PERFORMANCE OF LOW PRESSURE RATIO EJECTORS FOR ENGINE NACELLE COOLING
SAE ARP715-1963 A MEANS OF TESTING TURBOJET ENGINE STARTER PERFORMANCE
SAE AIR46-1956 THE PREPARATION AND USE OF CHROMEL-ALUMEL THERMOCOUPLES FOR TURBOJET ENGINES
SAE AIR4869A-2009 Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells
SAE ARP588-1965 FORCE BALANCING MACHINES FOR JET ENGINE COMPRESSOR AND TURBINE COMPONENTS - ROTATING TYPE
SAE ARP458-2002 Universal Maintenance & Overhaul Stand for Turbo-Jet (10,000 Lbs. Thrust Class) and Turbo-Prop Engines
SAE AIR4869-1995 Design Considerations for Enclosed Turbofan/Turbojet engine Test Cells
SAE AIR4869A-2020 Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells
SAE AIR4869B-2021 Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells
SAE ARP5305-2010 Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells
SAE ARP956-2002 Summary of Transportation, Handling and Storage Requirements for Starter Cartridges, Jet Engine, Mxu-4/A and Mxu-129/A
SAE ARP587A-1972 BALANCING EQUIPMENT FOR JET ENGINE COMPONENTS COMPRESSORS AND TURBINE - ROTATING TYPE FOR MEASURING UNBALANCE IN ONE OR MORE THAN ONE TRANSVERSE PLANES
SAE ARP587-1962 BALANCING MACHINES FOR JET ENGINE COMPONENTS - COMPRESSORS AND TURBINES - ROTATING TYPE - FOR MEASURING UNBALANCE IN ONE OR MORE THAN ONE TRANSVERSE PLANES
SAE ARP588A-1975 STATIC BALANCING EQUIPMENT FOR JET ENGINE COMPONENTS COMPRESSOR AND TURBINE - ROTATING TYPE FOR MEASURING UNBALANCE IN ONE TRANSVERSE PLANE

(U.S.) Ford Automotive Standards, Eruption along the river

FORD ESD-M5G43-A-1994 SOUND DEADENER, EXPANDED PVC - SPRAYABLE

IN-BIS, Eruption along the river

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Eruption along the river

GB/T 8019-2008 Determination of Gum Content in Fuels by Jet Evaporation

BE-NBN, Eruption along the river

NBN T 52-074-1977 Determination of existent gum in fuels by jet eva-poration
NBN H 03-328-1987
NBN C 79.001 DEEL 8-1981
NBN-EN 22875-1993 Packaging. Complete, filled transport packages. Water spray test (ISO 2875: 1985)

AT-ON, Eruption along the river

ONORM EN 5-1980 Determination of existent gum in fuels by jet evaporation
ONORM Z 1581-1986 Heating coils for liquid spray cleqners; design, equipment, testing
ONORM EN 26246-1994 Petroleum products. Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method (ISO 6246:1981)

SAE - SAE International, Eruption along the river

SAE R-347-2002 Direct Injection Systems The Next Decade in Engine Technology
SAE AIR1147A-1998 Electromagnetic Interference on Aircraft from Jet Engine Charging
SAE AIR1147-1970 Electromagnetic Interference on Aircraft from Jet Engine Charging
SAE J1958-1989 Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
SAE J1958-2015 Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
SAE AIR1191-1971 Performance of Low Pressure Ratio Ejectors for Engine Nacelle Cooling
SAE AIR6355-2019 Numerical Modeling Techniques for Jet Engine Test Cell Aerodynamics
SAE ARP458-1954 UNIVERSAL MAINTENANCE AND OVERHAUL STAND FOR TURBO-JET (10@000 LBS. THRUST CLASS) AND TURBO-PROP ENGINES

ES-AENOR, Eruption along the river

Japanese Industrial Standards Committee (JISC), Eruption along the river

JIS B 8035:1994 Testing method for fuel injection pump of diesel engine
JIS D 3639:2005 Diesel engines -- Cleanliness assessment of fuel injection equipment
JIS D 3639:2017 Diesel engines -- Cleanliness assessment of fuel injection equipment
JIS D 3611:2022 Direct injection gasoline engines -- Installation of the high pressure fuel pump to the engine
JIS D 3642:2013 Diesel engines -- Mounting dimensions of clamp mounted CR fuel injectors
JIS D 3604:1984 Shape and dimension of fuel injection nozzles for automobile diesel engines (size "s")
JIS D 3641-2:1997 Diesel engines -- Testing of fuel injectors -- Part 2: Test methods
JIS D 3638:2005 Road vehicles -- Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors
JIS D 3604:1998 Road vehicles -- Shapes and dimensions of fuel injection nozzles for diesel engines -- Size "S"
JIS D 3609:2016 Diesel engines -- End-connection with 60 degree female cones for high-pressure fuel injection components
JIS K 2261:2000 Petroleum products -- Motor gasoline and aviation fuels -- Determination of existent gum -- Jet evaporation method
JIS D 3631:1998 Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "S"
JIS D 3603-2:2006 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 2: Base-mounted in-line pumps and high-pressure supply pumps for common rail fuel injection systems
JIS D 3603-2:1999 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 2: Base-mounted in-line pumps
JIS D 3603-3:1999 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 3: Flanges for end flange-mounted pumps
JIS D 3641-1:1997 Diesel engines -- Testing of fuel injectors -- Part 1: Hand-lever-operated testing and setting apparatus
JIS D 3603-1:1999 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 1: Cradle-mounted in-line pumps
JIS D 3603-1:2016 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 1: Cradle-mounted in-line pumps
JIS D 3607-2:2002 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes
JIS D 3607-1:2002 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes
JIS D 3607-1:2014 Diesel engines.Steel tubes for high-pressure fuel injection pipes.Part 1: Requirements for seamless cold-drawn single-wall tubes
JIS D 3607-1:2021 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes

KR-KS, Eruption along the river

KS M ISO 6246-2018 Petroleum products — Gum content of fuels — Jet evaporation method
KS R ISO 6519-2018 Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
KS R ISO 8984-2-2008(2023) Diesel engines－Testing of fuel injectors－Part 2：Test methods
KS R ISO 2974-2020 Diesel engines — 60° female cones for high-pressure fuel injection components
KS B ISO 28139-2011 Agricultural and forestry machinery－Knapsack combustionengine-driven mistblowers－Safety requirements

German Institute for Standardization, Eruption along the river

DIN EN ISO 6246:2020-01 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017 + Amd.1:2019); German version EN ISO 6246:2017 + A1:2019
DIN EN ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017); German version EN ISO 6246:2017
DIN ISO 8984-2:1994 Diesel engines - Testing of fuel injectors - Part 2: Test methods; identical with ISO 8984-2:1993
DIN 51784:2020-07 Testing of liquid fuels - Determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation
DIN ISO 8984-1:1994-11 Diesel engines - Testing of fuel injectors - Part 1: Hand-lever-operated testing and setting apparatus; identical with ISO 8984-1:1993
DIN ISO 8984-1:1994 Diesel engines - Testing of fuel injectors - Part 1: Hand-lever-operated testing and setting apparatus; identical with ISO 8984-1:1993
DIN EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN 16
DIN EN 16712-4:2018-10 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN 16; German version EN 16712-4:2018

Military Standard of the People's Republic of China-General Armament Department, Eruption along the river

GJB 359-1987 Specification for humidity correction for turbojet and turbofan engine performance
GJB 378-1987 Temperature correction specification for turbojet and turbofan engine performance
GJB 723-1989 Specification for correction of fuel calorific value for turbojet and turbofan engine performance
GJB 359-1987(XG1-2015) Humidity Correction Specification for Turbojet and Turbofan Engine Performance Modification Sheet 1-2015

ESDU - Engineering Sciences Data Unit, Eruption along the river

ESDU 81009 A-1984 Estimation of windmilling drag and airflow of turbo-jet and turbo-fan engines.
ESDU 76034-1976 Estimation of take-off thrust using generalised data for turbo-jet and turbo-fan engines.
ESDU 98008-1998 PREDICTION OF NOISE GENERATED BY FANS AND COMPRESSORS IN TURBOJET AND TURBOFAN ENGINES
ESDU 98008 A-2003 Prediction of noise generated by fans and compressors in turbojet and turbofan engines.
ESDU 77001-1977 Effect of intake total pressure loss on net thrust at take-off: turbo-jet and turbo-fan engines.
ESDU 73019 C-1982 Approximate methods for estimation of cruise range and endurance: aeroplanes with turbo-jet and turbo-fan engines.
ESDU 70020-1970 Non-dimensional approach to engine thrust and airframe drag for the analysis of measured performance data: aircraft with turbo-jet and turbo-fan engines.
ESDU 70021-1970 Graphical method for the analysis of measured performance data using drag determination: aircraft with turbo-jet and turbo-fan engines.
ESDU 98008 B-2010 Prediction of noise generated by fans and compressors in turbojet and turbofan engines
ESDU 98008 C-2015 Prediction of noise generated by fans and compressors in turbojet and turbofan engines
ESDU 98008 B-2012 Prediction of noise generated by fans and compressors in turbojet and turbofan engines
PERF RJ1/2 B-1971 PERFORMANCE ANALYSIS FOR AIRCRAFT WITH TURBO-JETS “NON-DIMENSIONAL” GRAPHICAL METHOD RATE OF CLIMB
ESDU 69007 B-1981 The determination of gross thrust and mass flow in flight. (Air breathing ducted-flow engines with convergent nozzles.)
ESDU 74018 A-1977 Lost range@ fuel and time due to climb and descent: aircraft with turbo-jet and turbo-fan engines.
ESDU 84005 A-1989 Estimation of drag due to inoperative turbo-jet and turbo-fan engines using Data Item Nos 81009 and 84004.
ESDU 70022 A-1973 Non-dimensional graphical method for the analysis of measurements of steady level speed@ range and endurance: aircraft with turbo-jet and turbo-fan engines.
ESDU 69008-1969 Curves for use in the determination of gross thrust and mass flow in flight. (Air breathing ducted-flow engines with convergent nozzles.)

Danish Standards Foundation, Eruption along the river

DS/EN 5:1976 Determination of existent gum in fuels by jet evaporation
DS/EN 26246:1994 Petroleum products. Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method

RU-GOST R, Eruption along the river

GOST 18598-1973 Jet fuel. Method of defining corroding activity
GOST 27154-1986 Jet fuels. Method of test for water reaction
GOST R 57904-2017 Diesel engines. End-mounting flanges for pumps. Part 1. Fuel injection pumps
GOST 15583-1970 Gointf for conservation of flying venicle gas-turbine engines. Coupling dimensions and technical requirements
GOST 17750-1972 Jet fuel. Method for the determination luminometric number on the PLCHT instrument
GOST R 53241-2008 Marine geological exploration. Requirements for protection of marine environment under exploration and development of oil gas fields in continental shelf, territorial sea and littoral area
GOST R 53284-2009 Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
GOST 25950-1983 Jet aircraft fuel with antistatic additive. Method for determination of specific conductivity
GOST 32404-2013 Petroleum products. Test method for gum content in fuels by jet evaporation
GOST R 57905-2017 Diesel Engines. Base-mounted in-line fuil injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
GOST R 57906-2017 Diesel engines. Bracket-mounted CR fuel injectors. Overall and mounting dimensions
GOST 12308-1989 Thermostable fuels T-6 and T-8B for jet engines. Specifications
GOST 17751-1979 Jet fuel. Method of test for thermal oxidation stability under dynamic conditions
GOST R 53285-2009 Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods
GOST 11802-1988 Jet fuel. Method of test for determination of thermal-oxidative stability under static conditions
GOST R 53714-2009 Motor fuels, aviation fuels and low-boiling distillates. Method for determination of existent gums by jet evaporation
GOST R 51715-2001 Decorative and souvenir products similar in external structure to cold or throw or missile weapon. General technical requirements

AENOR, Eruption along the river

UNE 10078:1989 INTERNAL COMBUSTION ENGINES. INJECTION PUMPS SEALING FOR DIESEL ENGINES. SEALING SYSTEMS.
UNE-EN ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017)

JSAE - Society of Automotive Engineers of Japan@ Inc., Eruption along the river

JASO M359-2005 Road vehicles - Evaluation of deposits in a direct injection gasoline engine

IT-UNI, Eruption along the river

UNI EN 5-1979

US-FCR, Eruption along the river

FCR AF ETL 01-5-2001 JET ENGINE THRUST STANDOFF REQUIREMENTS FOR AIRFIELD ASPHALT EDGE PAVEMENTS

国家质量监督检验检疫总局, Eruption along the river

SN/T 4938-2017 Determination of actual colloid content of aviation turbine fuels by jet evaporation method

GB-REG, Eruption along the river

REG NASA-LLIS-0947-1995 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint: Interference Fit Bondline Case and Nozzle Insulation
REG NASA-LLIS-0950-2001 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint: Addition of Radial Bolts
REG NASA-LLIS-0951-1995 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint:"O" Ring Compression Increase
REG NASA-LLIS-0952-1995 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint: Added Capture Feature
REG NASA-LLIS-0672-2000 Lessons Learned - Application of Ablative Composites to Nozzles for Reusable Solid Rocket Motors
REG NASA-LLIS-0949-2001 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint: Wiper"O" Ring and Vent Slot Addition
REG NASA-LLIS-0946-1995 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint: Add a Pressurizing Slot in Case Insulation
REG NASA-LLIS-0948-1995 Lessons Learned ?Solid Rocket Motor Case-to-Nozzle Joint: Replace Zinc Chromate Putty with Polysulfide Adhesive
REG NASA-LLIS-0957-1995 Lessons Learned ?Solid Rocket Motor Nozzle Internal Seals: Dual"O" Ring Seals and Leak Check Ports

European Committee for Standardization (CEN), Eruption along the river

EN 16712-2:2015 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes
EN 16712-1:2015 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment Part 1: Inductors PN 16
EN 16712-3:2015 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 3: Low and medium expansion hand-held foam branchpipes PN 16
EN 25246:1993 Petroleum Products - Motor Gasoline and Aviation Fuels - Determination of Existent Gum - Jet Evaporation Method (ISO 6246:1981)
EN ISO 6246:1997 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995)
EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16

American Society for Testing and Materials (ASTM), Eruption along the river

ASTM D381-04e1 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-00 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-01 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-19 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-03 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-04 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-22 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D6894-08 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D1353-02 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1353-13 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1353-03 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1353-09 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D381-80e1 Standard Test Method for Existent Gum in Fuels by Jet Evaporation
ASTM D2908-91(2005) Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D381-09 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-12 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-12(2017) Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM E2346-04 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM E2346-09 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM E2346/E2346M-14 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM E2346/E2346M-15(2022) Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM E2346/E2346M-15(2022)e1 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM D2908-91(2011) Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D2908-91(2017) Standard Practice for Measurement of Volatile Organic Compounds in Water by Water Jet Gas Chromatography
ASTM D290-91a Standard Practice for Measurement of Volatile Organic Compounds in Water by Water Jet Gas Chromatography
ASTM D6732-02 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D6732-01 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D6732-04 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D3695-95(2001) Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D5325-03 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
ASTM D8279-23 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D6421-99a Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ASTM D8279-19 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D6894-03 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8279-22 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-21 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-20a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-20 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8279-21e1 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM E2346/E2346M-15 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8279-22a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D8047-19e1 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8279-23a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D6894-10 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6732-04(2010) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D5598-94 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D1613-02 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D1613-06 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D1613-03 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D1613-96(1999) Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D5598-18 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D5598-19 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D5598-20 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D1613-06(2012) Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D1613-17 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D8291-20a Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-19 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-20 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-21ae1 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-21 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-21a Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-23 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D8291-23a Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engin
ASTM D5598-01(2007) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D5598-01 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D5598-95a Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D5598-01(2012) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D8047-23 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6421-19 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ASTM D6421-18 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ASTM D6421-20 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ASTM D8047-16 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8047-19 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6421-99a(2004) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ASTM D8047-18 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8047-17 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8047-17a Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6421-99a(2014) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

American Society of Mechanical Engineers (ASME), Eruption along the river

ASME N-619-2001 Alternative Requirements for Nozzle Inner Radius Inspections for Class 1 Pressurizer and Steam Generator Nozzles Section XI, Division 1
ASME N-311-2001 Alternative Examination of Outlet Nozzle on Secondary Side of Steam Generators Section XI, Division 1; ANNULLED; (SUPP 11)

Underwriters Laboratories (UL), Eruption along the river

UL 2879 BULLETIN-2015 UL Outline of Investigation for Nitrogen Generator Units for Use with Dry Pipe Sprinkler Systems
UL SUBJECT 379-2010 OUTLINE OF INVESTIGATION FOR POWER UNITS FOR FOUNTAIN, SWIMMING POOL, AND SPA LUMINAIRES Issue Number: 3
UL SUBJECT 2879-2015 UL Outline of Investigation for Nitrogen Generator Units for Use with Dry Pipe Sprinkler Systems (Issue 1)
UL SUBJECT 676A-2001 Outline of Investigation for Potting Compounds for Swimming Pool@ Fountain@ and Spa Equipment (Issue Number: 2)
UL SUBJECT 199E-2004 OUTLINE OF INVESTIGATION FOR FIRE TESTING OF SPRINKLERS AND WATER SPRAY NOZZLES FOR PROTECTION OF DEEP FAT FRYERS Issue Number: 1

National Aeronautics and Space Administration (NASA), Eruption along the river

NASA-TM-X-72695-1975 The effect of chine tires on nose gear water-spray characteristics of a twin engine airplane
NASA-TN-D-4529-1968 Summary of VGH data collected on one type of twin-engine jet airplane during airline operations
NASA NACA-RM-E51A25-1951 Investigation of altitude ignition, acceleration and steady-state operation with single combustor of J47 turbojet engine

VN-TCVN, Eruption along the river

TCVN 6593-2010 Standard test method for gum content in fuels by jet evaporation
TCVN 7892-2008 Volatile solvents and chemical intermediates used in paint, varnish, lacquer, and related products.Method for determination of acidity

未注明发布机构, Eruption along the river

ISO 12345:2013/Cor 1:2014 Diesel engines. Cleanliness assessment of fuel injection equipment Technical Corrigendum 1
SAE ARP5305A-2017 Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells

ES-UNE, Eruption along the river

UNE 26108:2015 Road vehicles. Emergency lighting systems under dark conditions based on chemiluminescent fluid sprinkling
UNE-EN ISO 6246:2017/A1:2020 Petroleum products - Gum content of fuels - Jet evaporation method - Amendment 1: Purity requirement for n-heptane (ISO 6246:2017/Amd 1:2019)
UNE-EN 16712-4:2021 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16

Lithuanian Standards Office , Eruption along the river

LST EN ISO 6246:1999 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995)

US-CFR-file, Eruption along the river

CFR 33-148.510-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.510:What happens when a petition for exemption involves the interests of an Adjacent Coastal State?

国家市场监督管理总局、中国国家标准化管理委员会, Eruption along the river

GB/T 21437.2-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only

SE-SIS, Eruption along the river

SIS SS-ISO 6246:1989 Petroleum products — Motor gasoline and aviation fuels — Determination of existent gum — Jet evaporation method

NL-NEN, Eruption along the river

NEN-ISO 6246:1994 Petroleum products. Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method (ISO 6246:1981)

TH-TISI, Eruption along the river

TIS 1182.16-1998 Standard test method for petroleum and petroleum products.part 16: existent gum in fuels by jet evaporation

BELST, Eruption along the river

STB 11.13.16-2009 Fire safety standards system. Foam mixers for air-foam nosepieces and medium ratio foam generators. General specifications