ZH
RU
ES

Sampling volume and inspection volume

Sampling volume and inspection volume, Total:496 items.

In the international standard classification, Sampling volume and inspection volume involves: Milk and milk products, Raw materials for rubber and plastics, Wood-based panels, Metalliferous minerals, Quality, Vocabularies, Leather technology, Ferroalloys, Coals, Particle size analysis. Sieving, Non-metalliferous minerals, Soil quality. Pedology, Water quality, Construction materials, Refractories, Fuels, Paints and varnishes, Paint ingredients, Installations in buildings, Textile auxiliary materials, Continuous handling equipment, Meat, meat products and other animal produce, Sensory analysis, Protection against fire, Materials for aerospace construction, Welding, brazing and soldering, Aids for disabled or handicapped persons, Laboratory medicine, Paper and board, Fertilizers, General methods of tests and analysis for food products, Microbiology, Electricity. Magnetism. Electrical and magnetic measurements, Road engineering, Pumps, Waxes, bituminous materials and other petroleum products, Wood, sawlogs and sawn timber, Fruits. Vegetables, Sugar. Sugar products. Starch, Analytical chemistry, Ceramics, Organic chemicals, Radiation measurements, Processes in the food industry, Non-ferrous metals, Measurement of fluid flow, Bearings, Testing of metals, Inorganic chemicals, Linear and angular measurements, Fluid power systems, Products of the textile industry, Electronic components in general, Graphic technology, Astronomy. Geodesy. Geography, Surface treatment and coating, Air quality, Aircraft and space vehicles in general, Wastes, Spices and condiments. Food additives.

VN-TCVN, Sampling volume and inspection volume

• TCVN 6267-1997 Milk and milk products.Sampling.Inspection by variables
• TCVN 6266-2007 Milk and milk products.Sampling.Inspection by attributes
• TCVN 3649-2007 Paper and board.Sampling to determine average quality
• TCVN 4833-2-2002 Meat and meat products.Sampling and preparation of test samples.Part 2: Preparation of test samples for microbiological examination
• TCVN 7790-1-2007 Sampling procedures for inspection by attributes.Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• TCVN 7790-5-2008 Sampling procedures for inspection by attributes.Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection

Korean Agency for Technology and Standards (KATS), Sampling volume and inspection volume

• KS H ISO 8197:2006 Milk and milk products－Sampling－Inspection by variables
• KS E ISO 3085-2003(2018) Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
• KS Q ISO 8550-3:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 3：Sampling by variables
• KS Q ISO 8550-1-2012(2017) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
• KS Q ISO 8550-1-2012(2022) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
• KS Q ISO 8550-1:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 1：Acceptance sampling
• KS Q 1001-2005 Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
• KS Q ISO 8550-2:2012 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots-Part 2:Sampling by attributes
• KS D ISO 7087-2003(2018) Ferroalloys－Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• KS Q ISO 2859-2-2014(2019) Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality(LQ) for isolated lot inspection
• KS E ISO 13909-3:2005 Hard coal and coke－Mechanical sampling－Part 3：Coal－Sampling from stationary lots
• KS D ISO 7087:2003 Ferroalloys－Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• KS Q 3951-2013 Sampling procedures for inspection by variables
• KS H ISO 5538:2006 Milk and milk products－Sampling－Inspection by attributes
• KS H ISO 5538:2021 Milk and milk products — Sampling — Inspection by attributes
• KS D ISO 7347-2003(2018) Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
• KS E 3036-2009 Iron ores-Increment sampling and sample preparation-Mechanical method
• KS E ISO 8542:2003 Manganese and chromium ores－Experimental methods for evaluation of quality variation and methods for checking the precision of sampling
• KS D ISO 7347:2003 Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
• KS Q ISO 3951-3-A:2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• KS I ISO 5667-14:2022 Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
• KS I ISO 18400-102:2021 Soil quality — Sampling — Part 102: Selection and application of sampling techniques
• KS Q ISO 3951-1:2019 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
• KS I ISO 18400-106:2021 Soil quality — Sampling — Part 106: Quality control and quality assurance
• KS M ISO 186:2004 Paper and board－Sampling to determine average quality
• KS E 3036-2004 Iron ores-Increment sampling and sample preparation-Mechanical method
• KS E ISO 8541:2003 Manganese and chromium ores－Experimental methods for checking the bias of sampling and sample preparation
• KS I ISO 18400-101:2021 Soil quality — Sampling — Part 101: Framework for the preparation and application of a sampling plan
• KS A ISO 18414:2008 Acceptance sampling procedures by attributes-Accept-zero sampling system based on credit principle for controlling outgoing quality
• KS A ISO 18414:2015 Acceptance sampling procedures by attributes－Accept-zero sampling system based on credit principle for controlling outgoing quality
• KS E 3906-2017 Copper scraps for smelting－Methods for sampling, sample preparation and determination of moisture content
• KS M ISO 186:2020 Paper and board — Sampling to determine average quality
• KS A ISO 3951-5:2008 Sampling procedures for inspection by variables-Part 5:Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
• KS A ISO 3951-5:2013 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
• KS Q ISO 8550-3-2012(2022) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 3：Sampling by variables
• KS Q ISO 8550-3-2012(2017) Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots－Part 3：Sampling by variables
• KS Q ISO 3951-5:2019 Sampling procedures for inspection by variables — Part 5:Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
• KS A ISO 3951-1:2008 Sampling procedures for inspection by variables-Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• KS A ISO 3951-1:2013 Sampling procedures for inspection by variables-Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• KS E ISO 13292-2008(2018) Copper, lead, zinc and nickel concentrates－Experimental methods for checking the bias of sampling
• KS A ISO 3951-2:2008 Sampling procedures for inspection by variables-Part 2:General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality characteristics
• KS A ISO 3951-2:2013 Sampling procedures for inspection by variables－Part 2：General specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection of independent quality characteristics
• KS E 3008-1996(2021) BLISTER COPPER - METHODS FOR SAMPLING AND DETERMINATION OF MOISTURE CONTENT
• KS E ISO 8541:2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
• KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
• KS Q 0001-2013 Single sampling inspection plans by variables and attributes
• KS L 9015-1996(2021) Sampling, inspection, packing and marking of lime and limestone products
• KS E 3906-2017(2022) Copper scraps for smelting－Methods for sampling, sample preparation and determination of moisture content
• KS I ISO 18400-107:2021 Soil quality — Sampling — Part 107: Recording and reporting
• KS E 3008-1996(2016) BLISTER COPPER - METHODS FOR SAMPLING AND DETERMINATION OF MOISTURE CONTENT
• KS I ISO 23611-4-2013(2018) Soil quality－Sampling of soil invertebrates－Part 4：Sampling, extraction and identification of soil-inhabiting nematodes
• KS A ISO 18589-2:2012 Measurement of radioactivity in the environment-Soil-Part 2:Guidence for the selection of the sampling strategy, sampling and pre-treatment of samples
• KS A ISO 18589-2-2017(2022) Measurement of radioactivity in the environment－Soil－Part 2：Guidence for the selection of the sampling strategy, sampling and pre-treatment of samples
• KS B ISO 12308:2002 Plain bearings-Quality assurance-Sample types-Definitions, applications and testing
• KS B ISO 12308:2013 Plain bearings－Quality assurance－Sample types－Definitions, applications and testing
• KS I ISO 23611-3:2018 Soil quality — Sampling of soil invertebrates — Part 3: Sampling and soil extraction of enchytraeids
• KS I ISO 23611-2-2007(2021) Soil quality－Sampling of soil invertebrates－Part 2：Sampling and extraction of micro－arthropods(Collembola and Acarina)
• KS I ISO 23611-2-2007(2017) Soil quality－Sampling of soil invertebrates－Part 2：Sampling and extraction of micro－arthropods(Collembola and Acarina)
• KS E ISO 12744:2008 Copper, lead, zinc and nickel concentrates－Experimental methods for checking the precision of sampling
• KS I ISO 18400-105:2021 Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of samples
• KS I ISO 16665:2022 Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
• KS Q ISO 3951-4:2014 Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels

International Organization for Standardization (ISO), Sampling volume and inspection volume

• ISO 8197:1988 Milk and milk products; sampling; inspection by variables
• ISO/TR 2630:1978 Rubbers, raw — Sampling for inspection by variables
• ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables
• ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
• ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
• ISO/TR 8550-2:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
• ISO 7087:1984 Ferroalloys; Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• ISO 9498:1993 Fluorspar; experimental methods for checking the bias of sampling and sample preparation
• ISO 8542:1986 Manganese and chromium ores; Experimental methods for evaluation of quality variation and methods for checking the precision of sampling
• ISO 390:1977 Asbestos-cement products — Sampling and inspection
• ISO 5538:2004 Milk and milk products - Sampling - Inspection by attributes
• ISO 5538:1987 Milk and milk products; Sampling; Inspection by attributes
• ISO 5538:2004|IDF 113:2004 Sampling and counting inspection of milk and dairy products
• ISO 7347:1987 Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation
• ISO 5667-14:2014 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
• ISO 8541:1986 Manganese and chromium ores; Experimental methods for checking the bias of sampling and sample preparation
• ISO 18400-102:2017 Soil quality - Sampling - Part 102: Selection and application of sampling techniques
• ISO 3082:1987 Iron ores; Increment sampling and sample preparation; Mechanical method
• ISO 18400-106:2017 Soil quality - Sampling - Part 106: Quality control and quality assurance
• ISO 186:1977 Paper and board — Sampling for testing
• ISO 186:2002 Paper and board - Sampling to determine average quality
• ISO/DIS 18400-301 Soil quality — Sampling — Part 301: Sampling- and on site semi-quantitative determinations of volatiles in field investigations
• ISO 18400-101:2017 Soil quality - Sampling - Part 101: Framework for the preparation and application of a sampling plan
• ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• ISO 3951-1:2013 Sampling procedures for inspection by variables.Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
• ISO 28593:2017 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
• ISO 21398:2019 Hard coal and coke — Guidance to the inspection of mechanical sampling systems
• ISO 186:1985 Paper and board; Sampling to determine average quality
• ISO 186:1994 Paper and board - Sampling to determine average quality
• ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• ISO 3951-5:2006 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
• ISO 3951-1:2022 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
• ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
• ISO 23611-3:2019 Soil quality — Sampling of soil invertebrates — Part 3: Sampling and soil extraction of enchytraeids
• ISO 12744:2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling
• ISO 3951:1981 Sampling procedures and charts for inspection by variables for percent defective
• ISO 21398:2007 Hard coal and coke - Guidance to the inspection of mechanical sampling systems
• ISO 3951-2:2006 Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• ISO 18400-301:2023 Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations
• ISO 18400-107:2017 Soil quality - Sampling - Part 107: Recording and reporting
• ISO 3100-2:1988 Meat and meat products — Sampling and preparation of test samples — Part 2: Preparation of test samples for microbiological examination
• ISO 3951-2:2013 Sampling procedures for inspection by variables. Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• ISO 8086:2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures
• ISO 13292:2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling
• ISO 8086:1986 Dairy plant; Hygiene conditions; General guidance on inspection and sampling procedures
• ISO 8086:2004 | IDF 121:2004 Dairy plant — Hygiene conditions — General guidance on inspection and sampling procedures
• ISO 8086:2004|IDF 121:2004 General Guidelines for Inspection of Hygienic Conditions in Dairy Plants and Sampling Procedures
• ISO 23611-4:2022 Soil quality — Sampling of soil invertebrates — Part 4: Sampling, extraction and identification of soil-inhabiting nematodes
• ISO 9195:1992 Liquid flow measurement in open channels; sampling and analysis of gravel-bed material
• ISO 16665:2014 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
• ISO 18400-105:2017 Soil quality - Sampling - Part 105: Packaging, transport, storage and preservation of samples
• ISO 18589-2:2022 Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
• ISO 12308:1994 Plain bearings; quality assurance; sample types; definitions, applications and testing
• ISO/FDIS 3951-6:2023 Sampling procedures for inspection by variables — Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)
• ISO 2859-2:1985 Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• ISO 9391:1993 Water quality — Sampling in deep waters for macro-invertebrates — Guidance on the use of colonization, qualitative and quantitative samplers
• ISO 12308:2017 Plain bearings - Quality assurance of sample types - Definitions, applications and testing
• ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming

PT-IPQ, Sampling volume and inspection volume

• NP EN 326-3-2002 Wood-based panels Sampling,cutting and inspection Part 3:Inspection of a consignment of panels

Danish Standards Foundation, Sampling volume and inspection volume

• DS/ISO 2859-1:1992 Sampling procedures for inspection by attributes. Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
• DS/ISO 2859-2:1992 Sampling procedures for inspection by attributes. Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• DS/ISO 2859-1/Cor.1:1993 Sampling procedures for inspection by attributes - Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection -Technical Corrigendum 1
• DS 2184:1982 Sampling procedures and tables for inspection by attributes
• DS/EN 326-3:2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
• DS/ISO 8423:1992 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
• Standardpakke Stikproeveplaner 3-2008 Standards package - Acceptance sampling plans - Inspection by variables
• DS/ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables
• DS/EN ISO 23611-3:2011 Soil quality - Sampling of soil invertebrates - Part 3: Sampling and soil extraction of enchytraeids
• DS/ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• DS 423.1:1985 Testing of concrete. Sampling, inspection and statistical interpretation of test results
• DS/EN 326-1:1994 Wood-based panels-Sampling,cutting and inspection-Part 1:Sampling and cutting of test pieces and expression of test results
• DS/ISO 3951-1:2013 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• DS/ISO 3951-2:2013 Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• DS/EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
• DS/ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
• DS/EN ISO 23611-5:2013 Soil quality - Sampling of soil invertebrates - Part 5: Sampling and extraction of soil macro-invertebrates
• DS/ISO 3951-5:2007 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
• DS/ISO 8423/Cor.1:1993 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) -Technical Corrigendum 1

British Standards Institution (BSI), Sampling volume and inspection volume

• BS 6002-3:2005 Sampling procedures for inspection by variables - Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• BS ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
• BS ISO 3085:2019 Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
• BS 6002-1:1993 Sampling procedures for inspection by variables - Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
• BS 6000-3:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Guide to sampling by variables
• BS 6001-2:1993 Sampling procedures for inspection by attributes - Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• BS 6002-2:2007 Sampling procedures for inspection by variables - General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• BS ISO 3951-2:2013 Sampling procedures for inspection by variables. General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• BS ISO 13909-3:2002 Hard coal and coke - Mechanical sampling - Coal - Sampling from stationary lots
• BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Guide to sampling by attributes
• BS ISO 18400-102:2017 BS ISO 18400-102 Soil quality - Sampling. Part 102: Selection and application of sampling techniques
• BS ISO 5667-14:2014 Water quality. Sampling. Guidance on quality assurance and quality control of environmental water sampling and handling
• BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots - General guide to acceptance sampling
• BS ISO 5538:2004 Milk and milk products - Sampling - Inspection by attributes
• BS ISO 18400-106:2017 Soil quality. Sampling. Quality control and quality assurance
• BS 6001-9:2002 Sampling procedures for inspection by attributes - Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
• BS ISO 18400-101:2017 Soil quality. Sampling. Framework for the preparation and application of a sampling plan
• BS 6001-7:2001 Sampling procedures for inspection by attributes - Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
• BS 6001-5:2002 Sampling procedures for inspection by attributes - Procedures for assessment of declared quality levels
• BS 6001-1:1999 Sampling procedures for inspection by attributes - Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• BS 6068-6.14:1998 Water quality - Sampling - Guidance on quality assurance of environmental water sampling and handling
• BS ISO 18400-107:2017 Soil quality. Sampling. Recording and reporting
• BS EN ISO 23611-3:2011 Soil quality. Sampling of soil invertebrates. Sampling and soil extraction of enchytraeids
• BS ISO 10725:2001 Acceptance sampling plans and procedures for the inspection of bulk materials
• BS ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
• BS ISO 3951-1:2013 Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• BS EN ISO 23611-1:2011 Soil quality. Sampling of soil invertebrates. Hand-sorting and formalin extraction of earthworms
• BS EN 12504-1:2009 Testing concrete in structures Part 1: Cored specimens — Taking, examining and testing in compression
• BS EN 12504-1:2019(2020) Testing concrete in structures Part 1: Cored specimens — Taking, examining and testing in compression
• BS ISO 28593:2017 Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality
• BS ISO 18400-105:2017 Soil quality. Sampling. Packaging, transport, storage and preservation of samples
• DD ENV 13459-1-1999 Road marking. Materials. Quality control. Sampling from storage and testing
• BS EN ISO 186:2002 Paper and board - Sampling to determine average quality
• BS ISO 13292:2008 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling
• BS 598-100:2004 Sampling and examination of bituminous mixtures for roads and other paved areas - Methods for sampling for analysis
• BS 5293-7:2001 Sampling and testing carbon black for use in the rubber industry - Method for determination of ash content
• BS EN ISO 13632:2012 Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement
• BS ISO 23611-5:2011 Soil quality. Sampling of soil invertebrates. Sampling and extraction of soil macro-invertebrates
• BS 6002-1:2007 Sampling procedures for inspection by variables - Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• BS ISO 21398:2007 Hard coal and coke - Guidance to the inspection of mechanical sampling systems
• BS 5711-17:1983 Methods of sampling and test for glycerol - Limit test for lead
• BS ISO 12744:2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling
• BS EN ISO 23611-2:2011 Soil quality. Sampling of soil invertebrates. Sampling and extraction of micro-arthropods (Collembola and Acarina)
• BS EN 326-2:2000 Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory
• BS 5711-18:1979 Methods of sampling and test for glycerol - Detection of sugars
• BS EN 196-7:2007 Methods of testing cement — Part 7: Methods of taking and preparing samples of cement
• BS ISO 8086:2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures
• BS EN 326-2:2010+A1:2014 Wood-based panels. Sampling, cutting and inspection - Initial type testing and factory production control
• BS 6075-12:1981 Methods of sampling and test for sodium hydroxide for industrial use - Determination of copper content
• BS EN ISO 16665:2013 Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
• BS EN ISO 23611-3:2019 Soil quality. Sampling of soil invertebrates - Sampling and extraction of enchytraeids
• BS ISO 12308:2017 Plain bearings. Quality assurance of sample types. Definitions, applications and testing
• BS 5711-3:1979 Methods of sampling and test for glycerol - Determination of glycerol content
• BS 5711-6:1979 Methods of sampling and test for glycerol - Determination of ash: gravimetric method
• BS 5711-12:1979 Methods of sampling and test for glycerol - Determination of chloride content
• BS 5711-16:1979 Methods of sampling and test for glycerol - Determination of iron content

HU-MSZT, Sampling volume and inspection volume

• MSZ 14252-1971
• MSZ 20673-1982
• MSZ 21352-1982
• MSZ 6896-1960
• MSZ 6950/1.lap-1966
• MSZ 21880/1-1981
• MSZ 20681-1981
• MSZ 20678-1981
• MSZ 20683-1980
• MSZ 6926-1981
• MSZ 3240/1.lap-1961
• MSZ 19384-1981
• MSZ 8781-1984

Japanese Industrial Standards Committee (JISC), Sampling volume and inspection volume

• JIS M 8708:2005 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
• JIS K 6556-3:2016 Leather -- Sampling and preparation -- Number of items for a gross sample
• JIS P 8110:2006 Paper and board -- Sampling to determine average quality
• JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
• JIS M 8082:1999 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content
• JIS M 8082:1976 Method of sampling and methods of determination of copper content and moisture of copper scraps for smelting

BE-NBN, Sampling volume and inspection volume

• NBN-ISO 2859-2:1993 Sampling procedures for inspection by attributes. Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• NBN-ISO 2859-1:1993 Sampling procedures for inspection by attributes. Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
• NBN-ISO 4707:1992 Cork. Stoppers. Sampling for inspection for dimensional characteristics
• NBN B 22-001-1978
• NBN L 02-001-1972 Colorimetric vocabulary — Standards, methods and measuring apparatures
• NBN EN 295-2-1995
• NBN-EN 295-2-1992
• NBN-ISO 3863:1992 Cylindrical cork stoppers. Dimensional characteristics, sampling, packaging and marking

German Institute for Standardization, Sampling volume and inspection volume

• DIN 55350-31:1985 Concepts of quality management and statistics; concepts of acceptance sampling inspection
• DIN ISO 3951-1:2008 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2005); Text in German an
• DIN 51701-5:2008 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
• DIN ISO 3951-1:2016 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2013); Text in German an
• DIN EN 326-1:1994 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results; German version EN 326-1:1994
• DIN 53345-1:1978 Testing of fat liquors and greases for leather, methods of analysis, sampling
• DIN EN 326-3:2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels; German version EN 326-3:2003
• DIN 1996-2:1971 Testing of Bituminous Materials for Road Building and Related Purposes; Sampling
• DIN 52180-1:1977 Testing of wood; sampling and cutting, principles
• DIN ISO 2859-2:1993 Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985
• DIN EN 326-3:2004-02 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels; German version EN 326-3:2003
• DIN ISO 18414:2012 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 18414:2006); Text in German and English
• DIN EN 326-1:1994-08 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results; German version EN 326-1:1994
• DIN EN ISO 13632:2012-10 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012); German version EN ISO 13632:2012
• DIN ISO 18589-2:2009 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2007); English version of DIN ISO 18589-2:2009-02
• DIN EN 196-7:2008 Methods of testing cement - Part 7: Methods of taking and preparing samples of cement; English version of DIN EN 196-7:2008-02
• DIN EN ISO 5667-14:2016 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014); German version EN ISO 5667-14:2016
• DIN 10280:1973 Apparatus for dairy analysis; Mojonnier type extraction flask for the determination of fat content
• DIN EN 1015-2:2007-05 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars; German version EN 1015-2:1998+A1:2006

Standard Association of Australia （SAA）, Sampling volume and inspection volume

• AS 1141:1974 SAMPLING AND TESTING AGGREGATES
• AS 2862.2:2008 Copper, lead, zinc and nickel concentrates - Sampling - Experimental methods for checking the precision of sampling
• AS 2862.3:2008 Copper, lead, zinc and nickel concentrates - Sampling - Experimental methods for checking the bias of sampling
• AS/NZS 2891.10:2015
• AS/NZS 2891.3.2:2013
• AS 2862.1:2008 Copper, lead, zinc and nickel concentrates - Sampling - Sampling procedures for determination of metal and moisture content
• AS 2891.2.1:1995 Methods of sampling and testing asphalt - Sample preparation - Mixing, quartering and conditioning of asphalt in the laboratory
• AS/NZS 2891.3.1:2013
• AS/NZS 2891.3.3:2013
• AS 2862.1:2021 Copper, lead, zinc and nickel concentrates — Sampling, Part 1: Sampling procedures for determination of metal and moisture content
• AS ISO 11790:2022 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems
• AS 1141.72:1996 Methods for sampling and testing aggregates Method 72: Cement content of cement stabilized materials
• AS/NZS 2891.13.1:2013
• AS 1141.20.2:2000 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal sizes 5 mm and 7 mm)

TR-TSE, Sampling volume and inspection volume

• TS 2756-1977 Sampling Procedures And Tables For Inspection By Attributes And By Variables ?n Acceptance Sampling

U.S. Military Regulations and Norms, Sampling volume and inspection volume

• ARMY MIL-PRF-51028 C VALID NOTICE 1-2008 Sampling and Gaging Kit
• ARMY MIL-STD-286 C CHG NOTICE 2-2010 PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING
• ARMY MIL-PRF-51028 C (1)-2001 SAMPLING AND GAGING KIT
• ARMY MIL-PRF-51028 C-1998 SAMPLING AND GAGING KIT

RO-ASRO, Sampling volume and inspection volume

• STAS 106-1988 PAPER AND BOARD Sampling in view of testings and rules for quality checking up
• STAS SR ISO 7087:1995 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• STAS SR ISO 3082:1995 Iron ores. Increment sampling and sample preparation. Mechanical method
• STAS R 3160/4-1989 Sampling procedures for irr.pection by attributes SAMPLING PLANS INDEXED BY LLMITING QUALITY (LQ) FOR ISOLATED LOT INSPECTION
• STAS 6133-1972 STATISTICAL QUALITY CONTROL Acceptance inspection sampling General principles

ZA-SANS, Sampling volume and inspection volume

• SANS 3951-1:2008 Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• SANS 2859-1:2004 Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• SANS 3951-3:2008 Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• SANS 2859-5:2008 Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• SANS 3951-5:2008 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
• SANS 3951-2:2008 Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics

RU-GOST R, Sampling volume and inspection volume

• GOST 30975-2002 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• GOST R ISO 3951-1-2015 Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by AQL for lot-by-lot inspection for a single quality characteristic and a single AQL
• GOST R ISO 3951-2-2015 Statistical methods. Sampling procedures for inspection by variables. Part 2. General specification for single sampling plans indexed by AQL for lot-by-lot inspection of independent quality characteristics
• GOST 9980.2-2014 Paint materials and raw materials for them. Sampling, examination and preparation of test samples
• GOST 33984.2-2016 Lifts. Rules and methods of examinations (tests) and measurements by certification. Rules of sampling
• GOST 20736-1975 Quality control. Sampling inspection by variables for normal distribution of inspected parameters
• GOST R 55640-2013 Escalators and passenger conveyors. Rules and methods of examinations (tests) and measurements. Rules of sampling
• GOST 20235.0-1974 Meat of rabbits. Sampling methods. Organoleptic methods of freshness determination
• GOST R 55642-2013 Lifting platforms for persons with impaired mobility. Rules and methods of examinations (tests) and measurements. Rules of sampling
• GOST 32546-2013 Paper and board. Sampling to determine average quality
• GOST 3885-1973 Reagents and superpure substances. Regulations of acceptance, sampling, packing, marking, transportation and storage
• GOST R 50557-1993 Hydraulic fluidpower. Fluid sample containers. Qualifying and controlling cleaning methods
• GOST R 50065-1992 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• GOST R ISO 3951-1-2007 Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit for lot-by-lot inspection for a single quality characteristic and a single AQL

KR-KS, Sampling volume and inspection volume

• KS D ISO 7087-2003(2023) Ferroalloys－Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
• KS H ISO 5538-2021 Milk and milk products — Sampling — Inspection by attributes
• KS D ISO 7347-2003(2023) Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
• KS Q ISO 3951-3-A-2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• KS I ISO 5667-14-2022 Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
• KS I ISO 18400-102-2021 Soil quality — Sampling — Part 102: Selection and application of sampling techniques
• KS Q ISO 10725-2016 Acceptance sampling plans and procedures for the inspection of bulk materials
• KS Q ISO 3951-3-2012 Sampling procedures for inspection by variables－Part 3：Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• KS E ISO 8541-2018(2023) Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
• KS Q ISO 3951-1-2019 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
• KS I ISO 18400-106-2021 Soil quality — Sampling — Part 106: Quality control and quality assurance
• KS A ISO 3951-5-2008 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
• KS I ISO 18400-101-2021 Soil quality — Sampling — Part 101: Framework for the preparation and application of a sampling plan
• KS Q 0001-2013(2023) Single sampling inspection plans by variables and attributes
• KS M ISO 186-2020 Paper and board — Sampling to determine average quality
• KS Q ISO 3951-5-2019 Sampling procedures for inspection by variables — Part 5:Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
• KS E ISO 8541-2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
• KS I ISO 18400-107-2021 Soil quality — Sampling — Part 107: Recording and reporting
• KS I ISO 23611-3-2018 Soil quality — Sampling of soil invertebrates — Part 3: Sampling and soil extraction of enchytraeids
• KS I ISO 16665-2022 Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
• KS I ISO 18400-105-2021 Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of samples

Taiwan Provincial Standard of the People's Republic of China, Sampling volume and inspection volume

• CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size
• CNS 9445-1987 Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming
• CNS 3503-1986 Method of Test for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
• CNS 7490-1998 Method of Test for Microquantities of Uranium in Water by Fluorometry
• CNS 11554-1986 Method of Test for Lead and Cadmium Release From Porcelain Enamel Surface

Association Francaise de Normalisation, Sampling volume and inspection volume

• NF B51-190-2:2010 Wood-based panels - Sampling, cutting and inspection - Part 2 : initial type testing and factory production control.
• NF B51-190-2/IN1*NF EN 326-2/IN1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2 : initial type testing and factory production control
• NF B51-190-2*NF EN 326-2+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2 : initial type testing and factory production control
• NF V04-145*NF ISO 5538:2008 Milk and milk products - Sampling - Inspection by attributes
• NF V04-145:1988 Milk and milk products. Sampling. Inspection by attributes.
• NF B40-202:1982 Shaped refractory products. Sampling and acceptance testing.
• NF X31-009-102*NF ISO 18400-102:2017 Soil quality - Sampling - Part 102 : selection and application of sampling techniques
• NF A89-575:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.
• NF B51-190-1*NF EN 326-1:1994 Wood-based panels. Sampling, cutting and inspection. Part 1 : sampling and cutting of test pieces and expression of test results.
• NF X31-009-106*NF ISO 18400-106:2017 Soil quality - Sampling - Part 106 : quality control and quality assurance
• NF U42-051:1968 Fertilizers. Theory of sampling and batch evaluation.
• NF X31-009-101*NF ISO 18400-101:2017 Soil quality - Sampling - Part 101 : framework for the preparation and application of a sampling plan
• NF X06-013-1*NF ISO 3951-1:2014 Sampling procedures for inspection by variables - Part 1 : Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• NF Q03-009*NF EN ISO 186:2002 Paper and board - Sampling to determine average quality.
• NF Q03-009:1996 Paper and board. Sampling to determine average quality.
• FD T90-524:2015 Water quality - Quality controle for storage and water sampling
• NF P18-444-1:2012 Testing concrete in structures - Part 1 : cored specimens - Taking, examining and testing in compression.
• NF T30-417*NF EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
• NF EN 326-3:2004 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 3 : contrôle d'un lot isolé de panneaux
• NF EN 13913:2004 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 3 : contrôle d'un lot isolé de panneaux
• NF EN 61249-2-6:2004 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 3 : contrôle d'un lot isolé de panneaux
• NF EN 60068-3-8:2004 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 3 : contrôle d'un lot isolé de panneaux
• NF ISO 11843-4:2004 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 3 : contrôle d'un lot isolé de panneaux
• NF EN 61249-2-21:2004 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 3 : contrôle d'un lot isolé de panneaux
• NF X10-340*NF ISO 9195:1992 Liquid flow measurement in open channels. Sampling and analysis of gravel-bed material.
• NF U42-080:1981 Fertilizers. Solutions and suspensions. Sampling for estimating the average contents of a batch.
• NF X31-009-107*NF ISO 18400-107:2017 Soil quality - Sampling - Part 107 : recording and reporting
• NF EN ISO 23611-2:2011 Qualité du sol - Prélèvement des invertébrés du sol - Partie 2 : prélèvement et extraction des micro-arthropodes (Collembola et Acarina)
• NF X06-022-1*NF ISO 2859-1:2000 Sampling procedures for inspection by attributes - Part 1 : sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection.
• NF X06-013-2*NF ISO 3951-2:2014 Sampling procedures for inspection by variables - Part 2 : general specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• NF EN ISO 13632:2012 Liants pour peintures et vernis - Colophane - Échantillonnage et préparation des échantillons pour le mesurage de la couleur
• NF T90-371:2006 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna.
• NF M60-790-2:2008 Measurements of radioactivity in the environment - Soil - Part 2 : guidance for the selection of the sampling strategy, sampling and pre-treatment of samples.
• NF T90-371*NF EN ISO 16665:2014 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
• NF X31-009-105*NF ISO 18400-105:2017 Soil quality - Sampling - Part 105 : packaging, transport, storage and preservation of samples
• NF T90-353:1995 Water quality. Sampling in deep waters for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers.
• NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
• NF X06-022:2000 Sampling procedures for inspection by attributes - Part 2 : sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• NF X06-022-2*NF ISO 2859-2:2021 Sampling procedures for inspection by attributes - Part 2 : sampling plans indexed by limiting quality (LQ) for isolated lot inspection

Professional Standard - Commodity Inspection, Sampling volume and inspection volume

• SN/T 0736.1-1997 Method of inspection for import and export fertilizers.Sampling and sample preparation
• SN/T 0736.1-2012 Inspection for import and export fertilizers.Part 1:Sampling and sample preparation

AENOR, Sampling volume and inspection volume

• UNE 88001:2005 Products in fibrecement. Sampling and inspection.
• UNE-EN 326-3:2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
• UNE-ISO 3951-2:2012 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• UNE-ISO 3951-1:2012 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

European Committee for Standardization (CEN), Sampling volume and inspection volume

• EN ISO 5667-1:2023 Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2023)
• EN 1883:1998 Feather and down - Sampling in view of tests
• EN 1883:2018 Feather and Down - Sampling in View of Tests
• EN 326-1:1994 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
• EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
• EN 326-3:2003 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
• EN 326-3:1998 Wood-Based Panels - Sampling, Cutting and Inspection - Part 3: Inspection of a Consignment of Panels
• EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
• prEN 326-1-1990 Wood-based panels; sampling, cutting and inspection; part 1: sampling and cutting of test pieces and evaluation of test results
• EN ISO 5667-14:2016 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
• EN ISO 23611-4:2022 Soil quality - Sampling of soil invertebrates - Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO 23611-4:2022)
• EN ISO 186:2002 Paper and Board - Sampling to Determine Average Quality ISO 186:2002
• EN ISO 16665:2013 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2014)
• EN 326-2:2010 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control (Incorporates Amendment A1: 2014)
• EN ISO 5667-1:2006 Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (Incorporating corrigendum March 2007)
• prEN ISO 23611-5 rev Soil quality - Sampling of soil invertebrates - Part 5: Sampling and extraction of soil macro-invertebrates
• EN 13920-1:2003 Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests

PL-PKN, Sampling volume and inspection volume

• PN A74104-1986 Baked goods Sampling and qualit inspection
• PN A79120-05-1990 Wines and meads Preparation of samples and testing methods Determination of total extract and non-sugar extract content

American National Standards Institute （ANSI), Sampling volume and inspection volume

• ANSI/ASQ Z1.9-2003 Sampling procedures and tables for inspection by variables for percent nonconforming
• ANSI/ASQC Z1.9-2003 Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming
• ANSI/EIA 585:1991 Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots

IT-UNI, Sampling volume and inspection volume

• UNI 5948-1967
• UNI 7648-1976
• UNI 3137-1965 Microscopic examination of ferrous materials. Cutting of samples and specimens, preparaton and etching of specimens (etching reagents).
• UNI 3138-1965
• UNI 3594-1955

IN-BIS, Sampling volume and inspection volume

• IS 6092 Pt.5-1985
• IS 1699-1974
• IS 2500 Pt.2-1965

NZ-SNZ, Sampling volume and inspection volume

• NZS 4407.3.6:1991 Methods of sampling and testing road aggregates Test 3.6 The sand equivalent
• NZS 4407.3.11:1991 Methods of sampling and testing road aggregates Test 3.11 The weathering quality index of coarse aggregate
• NZS 4407.3.3:1991 Methods of sampling and testing road aggregates Test 3.3 The plastic limit

Professional Standard - Petroleum, Sampling volume and inspection volume

• SY/T 6437-2000 Sampling method and quality requirment of core sample for core analysis

Shaanxi Provincial Standard of the People's Republic of China, Sampling volume and inspection volume

• DB61/T 1430-2021 Product Quality Inspection Sampling Procedures

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sampling volume and inspection volume

• GB/T 18249-2000 Ferroalloys-Experimental methods for checking the bias of sampling and sample preparation
• GB/T 10325-2012(英文版) "Shaped refractory products—Rule of acceptance,sampling and inspection"
• GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• GB/T 14900-1994 Single sampling procedures and tables for product quality audit by variableg for mean value
• GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
• GB/T 2828.1-2012 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
• GB/T 2828.2-2008 Inspection procedures by count sampling - part 2 : sampling plans for isolated lot inspection retrieved by limit quality LQ
• GB/T 27680-2011 Copper,lead,zinc and nickel concentrates. Experimental methods for checking the bias of sampling
• GB/T 28863-2012 Sampling inspection procedures for commodity applying to the case with prior information of quality
• GB/T 8054-2008 Single sampling procedures and tables for inspection having desired operating characteristics by variables
• GB/T 2828.5-2011 Sampling procedures for inspection by attributes.Part 5 ： System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• GB/T 27679-2011 Copper,lead,zinc and nickel concentrates.Experimental methods for checking the precision of sampling
• GB/T 14437-1997 Single sampling procedures and tables by attributes for product quality audit
• GB/T 8054-1995 Single sampling procedures and tables for inspection having desired operating characteristics by variables for mean value
• GB/T 33244-2016 Quality requirements and test methods for digital hard-copy proofing system

TH-TISI, Sampling volume and inspection volume

• TIS 314-1979 Standard for sampling method and acceptance inspection of fasteners
• TIS 465.1-2011 Sampling procedures for inspection by attributes.part 1: sampling schemes indexed by acceptance quality limit (aql) for lot-by-lot inspection

Society of Automotive Engineers (SAE), Sampling volume and inspection volume

• SAE AMS2370K-2011 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
• SAE AMS-STD-753A-2012 Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation
• SAE AMS-STD-753B-2017 Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation
• SAE AMS2369A-1987 Quality Assurance Sampling, Carbon and Low-Alloy Steel Castings (Reaffirmed: 01 Jan 1992)
• SAE AMS2370J-2007 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
• SAE AMS2355H-2005 Quality Assurance Sampling and Testing of Aluminum Alloys and Magnesium Alloys, Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings
• SAE ARP9013/2-2005 Statistical Product Acceptance Requirements Using Attribute or Variable Lot Acceptance Sampling Plans

GOSTR, Sampling volume and inspection volume

• GOST 6859-1972 Apparatus for liquids sampling and measuring. Specifications

Jilin Provincial Standard of the People's Republic of China, Sampling volume and inspection volume

• DB22/T 1952-2013 Product quality inspection sampling sample management specification
• DB22/T 351-2019 Sanitary microbiological sample collection and testing principles

CZ-CSN, Sampling volume and inspection volume

• CSN ISO 2859-3:1993 Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures
• CSN ISO 186:1992 Paper and board — Sampling to determine average quality

American Society for Testing and Materials (ASTM), Sampling volume and inspection volume

• ASTM C183/C183M-22 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C183/C183M-16 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C140-12 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
• ASTM A610-79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
• ASTM D5337-23 Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps
• ASTM C183-02 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C183-08 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C183-13 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C140-02 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-02a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-01ae1 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-02b Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-99b Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM E2548-16 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
• ASTM C140-05e1 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-05 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-05a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-03 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C42/C42M-12 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM C42/C42M-13 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM E2548-11e1 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
• ASTM C140-12a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C140-13 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM B762-21 Standard Guide of Variables Sampling of Metallic and Inorganic Coatings
• ASTM C183/C183M-23 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C183-97 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C183/C183M-15 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

Lithuanian Standards Office , Sampling volume and inspection volume

• LST EN 326-3-2004 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
• LST 1615-2000 Food products and food additives. Sampling and preparation of test samples for microbiological examinations
• LST 1615/P-2020 Food products and food additives. Sampling and preparation of test samples for microbiological examinations
• LST EN 326-1-1999 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
• LST ISO 5667-14:2011 Water quality -- Sampling -- Part 14: Guidance on quality assurance of environmental water sampling and handling (ISO 5667-14:1998, identical)

YU-JUS, Sampling volume and inspection volume

• JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties
• JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.
• JUS H.N8.212-1991 Paper and boar?. Sampling to determinc. avaragc. qxial1ty
• JUS E.B1.080/1-2002 Sugar beet Quality requirements and sampling Amendment

未注明发布机构, Sampling volume and inspection volume

• BS EN 326-1:1994(1999) Wood - based panels — Sampling, cutting and inspection — Part 1 : Sampling and cutting of test pieces and expression of test results
• BS 6002-3:2005(2011) Sampling procedures for inspection by variables — Part 3 : Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot - by - lot inspection
• BS 6092-12:1981(2011) Methods of Sampling and test for sodium and potassium silicates for industrial use — Part 12 : Limit test for sulphate content of sodium metasilicate
• BS 6070-7:1981(2011) Methods of Sampling and test for sodium carbonate for industrial use — Part 7 : Determination of copper content
• BS ISO 3951-2:2013(2018) Sampling procedures for inspection by variables Part 2 : General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot - by - lot inspection of independent quality characteristics
• BS 6075-12:1981(2011) Methods of Sampling and test for sodium hydroxide for industrial use — Part 12 : Determination of copper content
• BS EN 1015-2:1999(2007) Methods of test for mortar for masonry — Part 2 : Bulk sampling of mortars and preparation of test mortars

Group Standards of the People's Republic of China, Sampling volume and inspection volume

• T/CIMA 0027-2021 Specification for inspection of AC sampling and measuring devices
• T/CAGIS 11-2023 Sampling method for quality inspection and acceptance of geographic information data products

CEN - European Committee for Standardization, Sampling volume and inspection volume

• EN ISO 186:1996 Paper and Board - Sampling to Determine Average Quality
• EN ISO 23611-4:2011 Soil quality - Sampling of soil invertebrates - Part 4: Sampling@ extraction and identification of soil-inhabiting nematodes
• EN ISO 16665:2005 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
• EN 326-2:2000 Wood-Based Panels - Sampling@ Cutting and Inspection - Part 2: Quality Control in the Factory (Incorporating Corrigendum December 2005)

Canadian General Standards Board （CGSB), Sampling volume and inspection volume

• CGSB 40-GP-1M METH 8-1978 Methods of Sampling and Testing Cordage Determination of Copper Content
• CGSB 2.11-94 13.2-CAN/CGSB-1994 Methodes D'Echantillonnage Et D'Essai Des Savons Et Detergents Determination De La Teneur En Eau (Par Distillation)
• CGSB 2.11-94 17.2-CAN/CGSB-1994 Methodes D'Echantillonnage Et D'Essai Des Savons Et Detergents Determination De La Teneur En Agent Tensio-Actif (Surfactant)

Indonesia Standards, Sampling volume and inspection volume

• SNI ISO 3951-1:2016 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• SNI 08-0616-1989 Single sample inspection for bulk acceptance by variable

US-CFR-file, Sampling volume and inspection volume

• CFR 40-1065.341-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.341:CVS, PFD, and batch sampler verification (propane check).

ES-AENOR, Sampling volume and inspection volume

• UNE 57-002-1988

BELST, Sampling volume and inspection volume

• STB 2160-2011 Bakery products. Acceptance procedures, sampling methods, definition methods organoleptic indicators and mass

Association of German Mechanical Engineers, Sampling volume and inspection volume

• VDI/VDE/DGQ 2618 Blatt 1.2-2003 Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement

Xinjiang Provincial Standard of the People's Republic of China, Sampling volume and inspection volume

• DB65/ 302-2000 Single sampling procedures and tables by attributes for product quality audit
• DB65/T 302-2000 One-time sampling inspection procedure and sampling plan for product quality supervision and counting

Professional Standard - Traffic, Sampling volume and inspection volume

• JT/T 495-2014 Sampling methods for highway safety facilities quality inspection

Professional Standard - Nuclear Industry, Sampling volume and inspection volume

• EJ 539-1991 Sampling Standards for Inspection and Sampling of Batch Products of Sealed Radioactive Sources

AASHTO - American Association of State Highway and Transportation Officials, Sampling volume and inspection volume

• T 127-2004 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
• T 127-2011 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
• T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement

The American Road & Transportation Builders Association, Sampling volume and inspection volume

• AASHTO T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement

Malaysia Standards, Sampling volume and inspection volume

• MS 81 Pt.14-2002 Method of sampling and test for spices and condiments:Part 14:Determination of lead

Others:   Sampling volume and inspection volume.