ZH
RU
ES

sem golden hour

sem golden hour, Total:498 items.

In the international standard classification, sem golden hour involves: Linear and angular measurements, Testing of metals, Production of metals, Shipbuilding and marine structures in general, Tea. Coffee. Cocoa, Mining and quarrying, Finances. Banking. Monetary systems. Insurance, Corrosion of metals, Mining equipment, Rubber, Non-ferrous metals, Surface treatment and coating, Welding, brazing and soldering, Powder metallurgy, Aircraft and space vehicles in general, Leather technology, Applications of information technology, General methods of tests and analysis for food products, Iron and steel products, Materials for aerospace construction, Construction equipment, Bearings, Hydraulic energy engineering, Products of the chemical industry, Packaging and distribution of goods in general, Fluid storage devices, Semiconductor devices, Paints and varnishes, Integrated circuits. Microelectronics, Cereals, pulses and derived products, Protection against fire, Electrical engineering in general, Test conditions and procedures in general, Electronic components in general, Metalliferous minerals, Fruits. Vegetables, Thermodynamics and temperature measurements, Vocabularies, Diagnostic, maintenance and test equipment, Construction materials, Products of non-ferrous metals.

American Society for Testing and Materials (ASTM), sem golden hour

ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1457-19 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E1457-07e3 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D1611-00 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM D1611-00(2005) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM E1457-00 Standard Test Method for Measurement of Creep Crack Growth Rates in Metals
ASTM E1457-07e1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D1611-00(2010) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM E1457-19e1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E1457-07e4 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E1457-15 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM A859/A859M-04 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM E22-41 Recommended Practice for Conducting Long-Time High-Temperature Tension Test of Metallic Materials
ASTM E1457-07 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM A538/A538M-82 Specification for Pressure Vessel Plates, Alloy Steel, Precipitation Hardening (Maraging), 18 Percent Nickel
ASTM A859/A859M-04(2009) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM A859/A859M-04(2014) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM E2295-21 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM A736/A736M-12 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel
ASTM E601-07e1 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM E601-07 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM E601-81(1997) Standard Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air
ASTM E601-20 Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air
ASTM E601-15 Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM A736/A736M-17 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel

U.S. Air Force, sem golden hour

AIR FORCE A-A-58033-1994 REFLECTOMETER, METALLIC, TIME DOMAIN
AIR FORCE A-A-59937-2013 REFLECTOMETER, METALLIC TIME DOMAIN

Military Standard of the People's Republic of China-General Armament Department, sem golden hour

GJB 1057-1990 LC9 aluminum alloy over-aging forgings
GJB 1057A-2020 Specification for over-aging forgings of aluminum alloys for aerospace applications
GJB 8671.12-2015 Test methods for metal cartridges Part 12: Aging strength test

RU-GOST R, sem golden hour

GOST 9651-1984 Metals. Methods of tension tests at elevated temperatures
GOST 25536-1982 Metals scales of images on photographs at metallographec examination
GOST 21981-1976 Sealants. Determination method of bond strength with metal at peeling
GOST 20019-1974 Sintered hard metals. Determination of cross-bending strength
GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST 27034-1986 Sintered hard metals. Method of compression and yield strength determination
GOST 31975-2013 Paints materials. Method for determination of gloss of non-metallic paint films at 20°, 60°and 85°
GOST 9.103-1978 Unified system of corrosion and ageing protection. Temporary prevention of metal and products. Terms and definitions
GOST 29012-1991 Powder metallurgy. Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering
GOST 9.511-1993 Unified system of corrosion and ageing protection. Magnesium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage

SAE - SAE International, sem golden hour

SAE AMS4360A-1946 MAGNESIUM ALLOY FORGINGS AZ 80 X (Aged)
SAE AMS4210B-1942 ALUMINUM ALLOY CASTINGS (Sand) 5% Silicon (Aged)
SAE AMS4214-1941 CAST ALUMINUM ALLOY 5% Silicon (Solution and Overaged)
SAE R-196-1998 The Golden Age of the American Racing Car (Second Edition)
SAE AMS4210D-1945 ALUMINUM ALLOY CASTINGS Sand 5 Silicon Aged (355-T51)
SAE AMS4210C-1945 ALUMINUM ALLOY CASTINGS Sand 5 Silicon Aged (355-T51)
SAE AMS4440-1956 MAGNESIUM ALLOY CASTINGS@ SAND 3.5Ce - 1Zr (EK41A-T5) Aged
SAE AMS4444-1960 MAGNESIUM ALLOY CASTINGS@ SAND 6Zn - 1Zr (ZK61A-T5) Aged
SAE AMS4443-1956 MAGNESIUM ALLOY CASTINGS@ SAND 4.5Zn - 0.7Zr (ZK51A-T5) Aged
SAE AMS4443A-1958 MAGNESIUM ALLOY CASTINGS@ SAND 4.5Zn - 0.7Zr (ZK51A-T5) Aged
SAE AMS4214A-1942 ALUMINUM ALLOY CASTINGS (Sand) 5% Silicon (Solution and Overaged)
SAE AMS4442-1956 MAGNESIUM ALLOY CASTINGS@ SAND 3.3Ce - 2.5Zn - 1Zr (EZ32A-T5) Aged
SAE AMS4447A-1965 MAGNESIUM ALLOY CASTINGS@ SAND 3.3Th - 2.1Zn - 0.8Zr (HZ32A-T5) Aged
SAE AMS4447-1957 MAGNESIUM ALLOY CASTINGS@ SAND 3.3Th - 2.1Zn - 0.8Zr (HZ32A-T5) Aged
SAE AMS4442A-1958 MAGNESIUM ALLOY CASTINGS@ SAND 3.3Ce - 2.5Zn - 0.7Zr (EZ33A-T5) Aged
SAE AMS4284-1942 ALUMINUM ALLOY CASTINGS (Permanent Mold) 7 Silicon (Solution and Aged)
SAE AMS4280-1942 ALUMINUM ALLOY CASTINGS (PERMANENT MOLD) 5 Silicon (Solution and Overaged)
SAE AMS4214B-1945 ALUMINUM ALLOY CASTINGS Sand 5 Silicon Solution and Overaged (355-T71)
SAE AMS4280A-1943 ALUMINUM ALLOY CASTINGS (PERMANENT MOLD) 5 Silicon (Solution and Overaged)
SAE AMS4983-1984 Titanium Alloy Forgings 10V - 2.0Fe - 3.0Al Solution Heat Treated and Aged
SAE AMS4437D-1990 Magnesium Alloy Castings@ Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
SAE AMS4222C-1951 Aluminum Alloy Castings@ Sand 4Cu - 2Ni - 1.5Mg (142-T77) Solution Treated and Overaged
SAE AMS4214C-1951 ALUMINUM ALLOY CASTINGS@ SAND 5Si - 1.3Cu - 0.5Mg (355-T71) Solution Treated and Overaged
SAE AMS4222B-1949 Aluminum Alloy Castings@ Sand 4Cu - 2Ni - 1.5Mg (142-T77) Solution Treated and Overaged
SAE AMS4222D-1959 Aluminum Alloy Castings@ Sand 4Cu - 2Ni - 1.5Mg (142-T77) Solution Treated and Overaged
SAE AMS4229-1969 ALUMINUM ALLOY CASTINGS@ HIGH STRENGTH 4.5Cu - 0.70Ag Solution Heat Treated and Overaged
SAE AMS4107E-1999 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged (UNS A97050)
SAE AMS4240E-1982 Aluminum Alloy Castings@ Sand 10Mg (520.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4166D-1991 Extrusions@ Aluminum Alloy 5.6Zn - 2.5mg - 1.6Cu - 0.23Cr (7075- T73) Solution Heat Treated and Overaged
SAE AMS4107G-2018 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged (UNS A97050)
SAE AMS2248H-2016 Chemical Check Analysis Limits Corrosion and Heat-Resistant Steels and Alloys@ Maraging and Other Highly-Alloyed Steels@ and Iron Alloys
SAE AMS4220C-1951 ALUMINUM ALLOY CASTINGS@ SAND 4Cu - 2Ni - 1.5Mg - 0.2Cr (A142-T75) Solution Treated and Overaged
SAE AMS4220B-1947 ALUMINUM ALLOY CASTINGS@ SAND 4Cu - 2Ni - 1.5Mg - 0.2Cr (A142-T75) Solution Treated and Overaged
SAE AMS4216-1989 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged
SAE AMS4220E-1995 ALUMINUM ALLOY CASTINGS@ SAND 4Cu - 2Ni - 1.5Mg - 0.2Cr (A142-T75) Solution Treated and Overaged
SAE AMS2248C-1981 CHEMICAL CHECK ANALYSIS LIMITS Wrought Corrosion and Heat Resistant@ Steels and Alloys@ Maraging@ and Other Highly-Alloyed Steels@ and Iron Alloys
SAE AMS2248D-1988 CHEMICAL CHECK ANALYSIS LIMITS Wrought Corrosion and Heat Resistant Steels and Alloys@ Maraging and Other Highly-Alloyed Steels@ and Iron Alloys
SAE AMS4222A-1947 Aluminum Alloy Castings@ Sand 4 Cu - 2.Ni - 1.5Mg (142-T77) Solution Treated and Overaged
SAE AMS4107D-1992 Aluminum Alloy Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) Solution Heat Treated and Overaged
SAE AMS4222E-1967 ALUMINUM ALLOY CASTINGS@ SAND 4.0Cu - 2.0Ni - 1.5Mg (142-T77) Solution Treated and Overaged
SAE AMS4243-1988 ALUMINUM ALLOY SHEET@ ALCLAD 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
SAE AMS4347A-1992 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged
SAE AMS4085F-2019 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged (UNS A97475)
SAE AMS4280G-1990 Aluminum Alloy Castings@ Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0 -T71) Solution Heat Treated and Overaged
SAE AMS4280D-1954 ALUMINUM ALLOY CASTINGS@ PERMANENT MOLD 5Si - 1.2Cu - 0.5Mg (355-T71) Solution Treated and Overaged
SAE AMS4214E-1978 ALUMINUM ALLOY CASTINGS@ SAND 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged (UNS A03550)
SAE AMS4223-1974 ALUMINUM ALLOY CASTINGS 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4237-1980 ALUMINUM ALLOY CASTINGS@ SAND 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0 -T4) Solution Heat Treated and Naturally Aged
SAE AMS4280C-1951 ALUMINUM ALLOY CASTINGS@ PERMANENT MOLD 5Si - 1.2Cu - 0.5Mg (355-T71) Solution Treated and Overaged
SAE AMS4303-1990 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated@ Cold Worked@ and Aged
SAE AMS4347-1987 ALUMINUM ALLOY SHEET 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T4) Solution Heat Treated and Naturally Aged (UNS A96013)
SAE AMS4330-2001 Aluminum Alloy@ Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.25Mg Solution Heat Treated@ Stretched@ and Artificially Aged
SAE AMS6930-2004 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS6930A-2006 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS6930F-2018 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4134G-2018 Aluminum Alloy@ Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged (UNS A92014)
SAE AMS4303C-2017 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated@ Cold Worked@ and Aged
SAE AMS4214K-2019 Castings@ Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged (UNS A03550)
SAE AMS4236B-2007 Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged (UNS A12060)
SAE AMS4166E-1998 Aluminum Alloy@ Extrusions 5.6Zn - 2.5mg - 1.6Cu - 0.23Cr (7075- T73) Solution Heat Treated and Overaged (UNS A97075)
SAE AMS4354-2016 Aluminum Alloy@ Plate@ 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4216A-1998 Aluminum Alloy@ Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged (UNS A96013)
SAE AMS4351-2014 Aluminum Alloy@ Plate (7065-T7651) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated@ Stress-Relieved@ and Overaged
SAE AMS4201B-1992 Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4243A-1996 Aluminum Alloy@ Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged (UNS A87050)
SAE AMS4361-2014 Aluminum Alloy@ Plate (7065-T7451) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated@ Stress-Relieved@ and Overaged
SAE AMS4405B-2018 Aluminum Alloy@ Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged (UNS AA6156)
SAE AMS4211-2000 Alluminum Alloy@ Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS6935B-2015 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged (UNS R56620)
SAE AMS6926B-2015 Titanium Alloy Bars@ Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged (UNS R58010)
SAE AMS6926C-2019 Titanium Alloy Bars@ Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged (UNS R58010)
SAE AMS6935-2004 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 6.0V - 2.0Sn Solution Heat Treated and Aged (UNS R56620)
SAE AMS6935C-2019 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged (UNS R56620)
SAE AMS4965G-1996 Titanium Alloy@ Bars@ Wire@ Forgings@ and Rings 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4934C-1993 Titanium Alloy@ Extrusions and Flash Welded Rings 6A1 - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4965M-2018 Titanium Alloy@ Bars@ Wire@ Forgings@ and Rings 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4934B-1988 Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4990C-2015 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged (UNS R56620)
SAE AMS4934G-2015 Titanium Alloy@ Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4236-1980 ALUMINUM ALLOY CASTINGS PREMIUM GRADE 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4166G-2012 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged (UNS A97075)
SAE AMS4378-2018 Aluminum Alloy@ Plate (7160-T7651) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4405C-2018 Aluminum Alloy@ Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged (UNS AA6156)
SAE AMS4463A-2017 Aluminum Alloy@ Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4161F-1996 Aluminum Alloy@ Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged (UNS A96061)
SAE AMS4226A-1983 Aluminum Alloy Castings@ High Strength 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged)
SAE AMS4223A-1982 Aluminum Alloy Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged (UNS A12010)
SAE AMS4223B-1989 Aluminum Alloy Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged (UNS A12010)
SAE AMS4229C-1990 Aluminum Alloy Castings@ High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged
SAE AMS4226-1972 ALUMINUM ALLOY CASTINGS@ HIGH STRENGTH 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged)
SAE AMS4161E-1991 Aluminum Alloy@ Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged (UNS A96061)
SAE AMS4330C-2018 Aluminum Alloy@ Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated@ Stretched@ and Artificially Aged (UNS A92297)
SAE AMS4330A-2003 Aluminum Alloy@ Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated@ Stretched@ and Artificially Aged (UNS A92297)
SAE AMS4473A-2017 Aluminum Alloy Plate (2624-T39) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated@ Cold Worked and Naturally Aged (UNS A92624)
SAE AMS4306-1988 ALUMINUM ALLOY PLATE 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated@ Stress Relieved@ and Aged (UNS A97150)
SAE AMS4934-1975 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al - 4V Solution Heat Treated and Aged
SAE AMS4904C-2015 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4934A-1977 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al - 4V Solution Heat Treated and Aged
SAE AMS4306C-2018 Aluminum Alloy@ Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated@ Stress Relieved@ and Aged (UNS A97150)
SAE AMS4299A-2018 Aluminum Alloy@ Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97449)
SAE AMS4237B-2007 Aluminum Alloy Castings@ Sand 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0 -T71) Solution Heat Treated and Naturally Aged (UNS A02060)
SAE AMS6906C-2019 Titanium Alloy Bars@ Forgings@ and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged (UNS R56260)
SAE AMS4904D-2018 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4407A-2018 Aluminum Alloy@ Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97056)
SAE AMS4464A-2017 Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated@ Cold Worked and Naturally Aged (UNS A92624)
SAE AMS4206C-2017 Aluminum Alloy@ Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97055)
SAE AMS5875B-1993 Cobalt Alloy@ Corrosion and Heat Resistant@ Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated@ Cold Rolled@ and Aged (UNS R30003)
SAE AMS4344A-1990 Aluminum Alloy Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4081G-1993 Aluminum Alloy Tubing@ Hydraulic@ Seamless@ Drawn@ Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4345-1989 Aluminum Alloy Extrusions 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T77511) Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4159B-1989 Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated@ Stress Relieved@ and Overaged
SAE AMS4252-1989 ALUMINUM ALLOY PLATE 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97150)
SAE AMS4050E-1992 Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS4078E-1992 Aluminum Alloy Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97075)
SAE AMS4050H-2003 Aluminum Alloy@ Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS4250B-2018 Aluminum Alloy@ Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97449)
SAE AMS4201A-1986 ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated@ Stress Relieved and Overaged (UNS A97050)
SAE AMS4201D-2001 Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS4201C-2000 Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS6921B-2015 Titanium Alloy Bars@ Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged (UNS R58640)
SAE AMS5875D-2018 Cobalt Alloy@ Corrosion and Heat-Resistant@ Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated@ Cold Rolled@ and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted (UNS R30003)
SAE AMS4250C-2019 Aluminum Alloy@ Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97449)
SAE AMS4329B-2017 Aluminum Alloy@ Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated@ Stress-Relieved@ and Overaged (UNS A97085)
SAE AMS4408A-2018 Aluminum Alloy@ Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97140)
SAE AMS4252C-2018 Aluminum Alloy@ Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97150)
SAE AMS4211C-2018 Aluminum Alloy@ Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97040)
SAE AMS4470C-2018 Aluminum Alloy@ Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated@ Stress-Relieved@ and Overaged (UNS A97085)
SAE AMS6921C-2019 Titanium Alloy Bars@ Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged (UNS R58640)
SAE AMS5845E-1996 Alloy@ Corrosion Resistant@ Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30035)
SAE AMS5834B-1993 Cobalt Alloy@ Corrosion and Heat Resistant@ Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated@ Cold Drawn@ and Aged (UNS R30003)
SAE AMS5845F-2002 Alloy@ Corrosion-Resistant@ Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30035)
SAE AMS4229A-1976 ALUMINUM ALLOY CASTINGS@ HIGH STRENGTH 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201.0-T7) Solution Heat Treated and Overaged (UNS A02010)
SAE AMS4480-2015 Aluminum Alloy@ Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged (UNS A96061)
SAE AMS4229B-1982 ALUMINUM ALLOY CASTINGS@ HIGH STRENGTH 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged (UNS A02010)
SAE AMS4107B-1984 ALUMINUM ALLOY DIE FORGINGS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) (Formerly - T736) Solution Heat Treated and Overaged (UNS A97050)
SAE MAM4131A-1996 Aluminum Alloy@ Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cr - 0.23Cr (7075-T74) Solution Heat Treated and Aged (UNS A97075)
SAE AMS4332A-2018 Aluminum Alloy@ Extruded Profiles (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr Solution Heat Treated@ Stress-Relieved@ and Overaged
SAE AMS4412A-2009 Aluminum Alloy@ Sheet 3.2Cu – 0.52Mg – 0.30Ag – 0.12Zr (2198-T8) Solution Heat Treated@ Cold Worked@ and Artificially Aged (UNS A92198)
SAE AMS7475-1977 BOLTS AND SCREWS@ WORK-STRENGTHENED ALLOY@ CORROSION AND HEAT RESISTANT Forged Head@ Roll Threaded After Aging
SAE AS7475-1991 Bolts and Screws@ Work- Strengthened Alloy@ Corrosion and Heat Resistant Forged Head@ Roll Threaded After Aging
SAE AMS4950-1996 Titanium Alloy@ Bars@ Wire@ Forgings@ and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength
SAE AMS7468B-1993 BOLTS AND SCREWS@ CORROSION-RESISTANT WORK-STRENGTHENED ALLOY FORGED HEAD@ ROLL THREADED AFTER AGING (UNS R30035)
SAE AMS5845K-2019 Alloy@ Corrosion-Resistant@ Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30035)
SAE AMS4229G-2015 Aluminum Alloy Castings@ High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged (UNS A02010)
SAE MAM4131B-2003 Aluminum Alloy@ Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged (UNS A97075)
SAE AMS4226B-2017 Aluminum Alloy Castings@ High Strength 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged) (UNS A02240)

Anhui Provincial Standard of the People's Republic of China, sem golden hour

DB34/T 989-2009 Geographical indication product Jinshan Shiyu Tea
DB34/T 989-2013 Geographical indication product Jinshan Shiyu Tea

Professional Standard-Ships, sem golden hour

CB 1065-1987 Man-hour quota for metal propeller manufacturing
CB 1085.2-1989 Instrument manufacturing man-hour quota fitter, sheet metal, stamping
CB 1073-1989 Man-hour quotas for manufacturing metal structural parts of marine diesel engines
CB 1080.2-1989 Man-hour quota welding of special auxiliary equipment and metal structural parts
CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing
CB 1080.1-1989 Man-hour quota assembly and lofting of metal structural parts for special auxiliary equipment
CB 1080.3-1989 Special Auxiliary Machines Armed Metal Structural Parts Manufacturing Working Hours Quota Cold Processing, Fireworks, Gas Cutting

CZ-CSN, sem golden hour

CSN 03 8003-1975 Temporary protection of raetals against corrosion. Terminology
CSN 03 8205-1979 Corrosion protection. General requirements to temporary protection of metals
CSN 42 0890 Cast.5-1981 Testlng of metal powders. Determination of mass loss of metal powder at annealing in hydrogen
CSN 03 8209-1983 Tempórary protection agents against corrosion of metals. Classification and marking
CSN 03 8404-1989 Temporary protection agents against corrosion of metals. Method of de-termination of protective efficiency at the contamination by hand sweat

IT-UNI, sem golden hour

UNI 4887-1962

PL-PKN, sem golden hour

PN H04680-1974 Corrosion protection Temporary protection of metal Terminology
PN M55652-1961 Metal Cut?ing Machin? Tools. Test Conditions for Parallel Lathes with Dia- meter of Turn upon Bed to 1000 mm
PN M55657-1960 Metal Cuttinq Machin? Tools. Tes? Con- di?ions for Turret Lafhes with Diame?er of Tum upon Bed to 630 mm

Group Standards of the People's Republic of China, sem golden hour

T/CGA 020-2021 Technical specification for microseismic real-time monitoring of gold mines
T/IAC 20.2-2019 Standard of accident vehicles repair labour time measurement－ Part 2: External panel repair time
T/CGA 021-2021 Technical specifications for real-time monitoring of open-pit slopes in gold mines
T/ZZB 1469-2019 Tension pulling wheel of passenger automotive engine
T/CGA 022-2021 Technical specifications for real-time monitoring of gold mine tailings dam stability
T/ZJQYXXH 001-2022 Technical requirements and test method on real time computing system of financial risk control
T/CAIA SH008-2017 Real-Time Simultaneous Amplification and Testing (SAT) method for detecting S.aureus in foods?
T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
T/CITS 0001-2021 Detection of heavy mental plumbum in grain—Time-resolved fluorescent immunochromatographic method
T/CSTM 00840.3-2022 High purity GH4169 alloy for aero-engine rotating components －Part 3：Direct age forged parts
T/QDIA 001.1-2020 Insured Accident Motor Vehicle Restoration Part 1: Calculation Method of Sheet Metal and Painting Working Hours

International Organization for Standardization (ISO), sem golden hour

ISO/TR 7655:2022 Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
ISO/DIS 20937 Financial services — Specification of QR-codes for mobile (instant) credit transfers
ISO 3927:2001 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
ISO 3927:1985 Metallic powders, excluding powders for hardmetals; Determination of compactibility (Compressibility) in uniaxial compression
ISO 2813:1978 Paints and varnishes; Measurement of specular gloss of non-metallic paint film at 20 degrees, 60 degrees and 85 degrees
ISO 3690:1977 Welding; Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels

Professional Standard - Geology, sem golden hour

DZ/T 0101.7-1994 Geological instrumentation manufacturing time quota sheet metal
DZ/T 0101.9-1994 Geological instruments and meters manufacturing time quota non-ferrous metal casting

VN-TCVN, sem golden hour

TCVN 5407-1991 Corrosion protection.Temporary metal protection facilities.Classification and coding
TCVN 2101-2008 Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20 degrees,60 degrees and 85 degrees
TCVN 3962-1984 Keyway End mills with carbide tipped blades and long working parts.Basic dimensions

TR-TSE, sem golden hour

TS 279-1965 CREEP AND TIME FOR RUPTURE TENS?ON TESTS ON METALLIC MATERIALS

水利部, sem golden hour

SL/T 749-2017 Vibration aging and effect assessment of hydraulic metal structures

German Institute for Standardization, sem golden hour

DIN 50929-1:1985 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general
DIN 50929-1:2017 Corrosion of metals - Corrosion likelihood of corrosion of metallic materials when subject to corrosion from the outside - Part 1: General
DIN 50929-1:2017-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 1: General
DIN 31665:1993 Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions
DIN EN 3315:2019 Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - D 75 mm; German and English version EN 3315:2018
DIN EN 62374-1:2011-06 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (IEC 62374-1:2010); German version EN 62374-1:2010 + AC:2011
DIN 50929-2:2017-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 2: Service components inside buildings
DIN 50929-2:2017 Corrosion of metals - Corrosion likelihood of corrosion of metallic materials when subject to corrosion from the outside - Part 2: Service components inside buildings
DIN EN 3314:2019 Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D 75 mm; German and English version EN 3314:2019
DIN EN 61523-2:2003 Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries (IEC 61523-2:2002); German version EN 61523-2:2002, text in English
DIN 50929-3:1985 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components
DIN 50929-3:2018-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components
DIN 50929-3 Beiblatt 1:2014-11 Corrosion of metals - Probability of corrosion of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components; Supplement 1: Corrosion rates of structural components in water
DIN 50929-3:2023-08 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components / Note: Date of issue 2023-07-07*Intended as replacement for DIN 50929-3 (20...

Society of Automotive Engineers (SAE), sem golden hour

SAE AMS5917-2022 Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and Aged
SAE AMS4107F-2012 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE AMS4107H-2023 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE AMS4437E-2008 Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
SAE AMS4437D-1994 Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
SAE AMS4220E-1969 Aluminum Alloy, Castings, Sand, 4cu 2ni 1.5mg 0.2cr, Solution Treated and Overaged
SAE AMS4085B-1995 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AMS4085E-2018 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AMS2248E-2000 Chemical Check Analysis Limits Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
SAE AMS4956E-2008 Titanium Alloy Welding Wire 6A1 4V, Extra Low Interstitials Environment Controlled Packaging
SAE AMS4214J-2013 Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4223C-1996 Aluminum Alloy, Castings 4.5Cu 0.70Ag 0.30Mn 0.25Mg 0.25Ti, Solution Heat Treated and Naturally Aged
SAE AMS4347B-2001 Aluminum Alloy Sheet, 1.0Mg 0.8Si 0.8Cu 0.50Mn (6013-t4) Solution Heat Treated and Naturally Aged
SAE AMS6930G-2022 Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged
SAE AMS4904E-2023 Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged
SAE AMS2248H-2022 Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys
SAE AMS4617A-2017 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged
SAE AMS4907H-2005 Titanium Alloy Sheet, Strip, and Plate, 6.0Al 4.0V, Extra Low Interstitials, Annealed
SAE AMS4166F-2008 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AMS4166C-1985 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AMS4242B-2012 Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged
SAE AMS4220D-1995 ALUMINUM ALLOY CASTINGS, SAND 4Cu - 2Ni - 1.5Mg - 0.2Cr (A142-T75) Solution Treated and Overaged
SAE AMS4236A-2000 Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4146C-1984 ALUMINUM ALLOY FORGINGS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged
SAE AMS4078F-2000 Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4216B-2013 Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged
SAE AMS4965N-2022 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged
SAE AMS4216C-2020 Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged
SAE AMS4990D-2019 Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged
SAE AMS6926D-2022 Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged
SAE AMS4347E-2020 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged
SAE AMS2248E-1993 Chemical Check Analysis Limits, Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
SAE AMS4280H-2006 Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4161D-1984 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4161E-2011 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4223D-2012 Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4237A-2000 Aluminum Alloy Castings, Sand 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71) Solution Heat Treated and Naturally Aged
SAE AMS4223B-1995 ALUMINUM ALLOY CASTINGS 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4243B-2014 Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
SAE AMS4161G-2010 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4347D-2014 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged (UNS A96013)
SAE AMS4303B-2012 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
SAE AMS4303-1994 ALUMINUM ALLOY PLATE 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
SAE AMS6906B-2015 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged
SAE AMS4161J-2020 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4243C-2020 Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
SAE AMS4299B-2023 Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4473B-2022 Aluminum Alloy Plate (2624-T39) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged
SAE AMS4280J-2014 Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4904-2003 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated and Aged
SAE AMS4909H-2008 Titanium Alloy, Sheet, Strip, and Plate 5Al 2.5Sn, Extra Low Interstitial Annealed
SAE AMS4280G-1994 ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4242A-1997 Aluminum Alloy, Castings, 4.7Cu 0.60Ag 0.35Mn 0.25Mg 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged Aircraft
SAE AMS4330B-2012 Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged
SAE AMS4201E-2008 Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4201A-1991 ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4050C-1984 ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050 - T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4050B-1984 ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050 - T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4299-2012 Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4078C-1984 ALUMINUM ALLOY PLATE 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4213A-2016 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged
SAE AMS4078D-2011 ALUMINUM ALLOY PLATE 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS7468-1995 BOLTS AND SCREWS, WORK-STRENGTHENED ALLOY, CORROSION RESISTANT Forged Head, Roll Threaded After Aging
SAE AMS4236D-2015 Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged (UNS A12060)
SAE AMS4330E-2022 Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged
SAE AMS4242C-2015 Aluminum Alloy@ Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged (UNS A02010)
SAE AMS4213B-2022 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged
SAE AMS4201G-2020 Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4934H-2019 Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged
SAE AMS4206D-2023 Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4044M-2010 Aluminum Alloy, Sheet and Plate 5.6Zn 2.5Mg 1.6Cu 0.23Cr Annealed (7075-0) or when specified, As Fabricated (7075-F)
SAE AMS4226A-2012 Aluminum Alloy Castings, High Strength 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged)
SAE AMS4229D-2006 Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged
SAE AMS4229C-1994 ALUMINUM ALLOY CASTINGS, HIGH STRENGTH 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged
SAE AMS4131D-2011 Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged
SAE AMS4412A-2015 Aluminum Alloy, Sheet 3.2Cu - 0.52Mg - 0.30Ag - 0.12Zr (2198-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4329-2003 Aluminum Alloy, Plate (7085-T7651) 7.5Zn 1.6Cu 1.5Mg 0.12ZrSolution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4468-2017 Aluminum Alloy, Plate 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139-T84) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4409-2013 Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved and Artificially Aged
SAE AMS4223E-2015 Aluminum Alloy@ Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged (UNS A12010)
SAE AMS4044P-2023 Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or, When Specified, “As Fabricated” (7075-F)
SAE AMS4131E-2019 Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged
SAE AMS4468A-2022 Aluminum Alloy, Plate 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139-T84) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4990-2003 Titanium Alloy Sheet, Strip, and Plate 6Al 6V 2Sn Solution Heat Treated and Aged
SAE AMS4457-2014 Aluminum Alloy, Sheet 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.12Zr (2098-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4340D-1998 Aluminum Alloy, Extrusions, 6.2Zn 2.3Cu 2.2Mg 0.12Zr, Solution Heat Treated, Stress Relieved, Straightened, and Overaged
SAE AMS4157C-1994 Aluminum Alloy, Extrusions, 7.7Zn 2.4Mg 1.6Cu 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS5875A-2011 ALLOY STRIP, CORROSION AND HEAT RESISTANT 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged
SAE AMS4328-2003 Aluminum Alloy, Plate (2397-T87) 2.8Cu 1.4Li 0.30Mn 0.12Zr 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4250-2001 Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged UNS A97449
SAE AMS4252A-1995 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated, Stress Relieved, and Overaged (UNS A97150)
SAE AMS4050J-2014 Aluminum Alloy@ Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS4330D-2020 Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged (UNS A92297)
SAE AMS4050H-2011 Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4306B-2012 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, and Aged
SAE AMS4410-2013 Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4411-2013 Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4401A-2017 Aluminum Alloy Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4328A-2013 Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4306A-2000 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, and Aged
SAE AMS4211B-2012 Aluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4407-2012 Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4250A-2012 Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4050K-2021 Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged (UNS A97050)
SAE AMS4031K-2022 Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Annealed or, When Specified, “As Fabricated” (2219-F)
SAE AMS4410A-2019 Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4411A-2019 Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4950F-2023 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength
SAE AMS4328B-2019 Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS5834B-2000 Cobalt Alloy, Corrosion and Heat Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Drawn, and Aged
SAE AMS5875B-2000 Cobalt Alloy, Corrosion and Heat Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged
SAE AMS4337A-2011 Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4305-2017 Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4332-2012 Aluminum Alloy, Extruded Profiles (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4107C-2011 ALUMINUM ALLOY DIE FORGINGS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) (Formerly -T736) Solution Heat Treated and Overaged
SAE AMS4147B-2011 ALUMINUM ALLOY FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr(7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE AMS4147C-2000 Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr(7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE AMS4147D-2012 Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE AMS4337-1998 Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn 2.3Cu 2.0Mg 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS5845A-1979 ALLOY BARS, HIGH STRENGTH, CORROSION RESISTANT 20Cr - 35Ni - 35Co - 10Mo Solution Heat Treated, Cold Drawn, and Aged
SAE AMS5834A-2011 ALLOY WIRE, CORROSION AND HEAT RESISTANT 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Drawn, and Aged
SAE AMS4206-1999 Aluminum Alloy, Plate (7055-T7751) 8.0Zn 2.3Cu 2.0Mg 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4252B-2012 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4329A-2011 Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4470B-2018 Aluminum Alloy, Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4408-2017 Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS7475B-1991 Bolts and Screws, Work-Strengthened Alloy, Corrosion and Heat Resistant, Forged Head, Roll Threaded After Aging
SAE AMS7475A-1991 BOLTS AND SCREWS, WORK-STRENGTHENED CORROSION AND HEAT RESISTANT ALLOY Forged Head, Roll Threaded After Aging
SAE AMS4432-2019 Aluminum Alloy, Plate (7160-T7451) 7.0Zn – 2.2Cu – 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4365A-2022 Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4354A-2022 Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4401B-2022 Aluminum Alloy, Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4364A-2021 Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4361A-2020 Aluminum Alloy, Plate (7065-T7451) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4448-2020 Aluminum Alloy, Plate (7160-T7351) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4305A-2023 Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4351A-2020 Aluminum Alloy, Plate (7065-T7651) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4409A-2021 Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved and Artificially Aged (UNS A97019)
SAE AMS4480A-2020 Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged (UNS A96061)
SAE AMS4458B-2022 Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4120P-2001 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
SAE AMS4120R-2010 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)

US-CFR-file, sem golden hour

CFR 5-848.502-2014 Administrative personnel. Part848:Phased retirement. SubpartE:Computation of phased retirement annuity at phased retirement and composite retirement annuity at full retirement. section848.502:Computation of composite annuity at final retirement.
CFR 5-848.504-2014 Administrative personnel. Part848:Phased retirement. SubpartE:Computation of phased retirement annuity at phased retirement and composite retirement annuity at full retirement. section848.504:Non-eligibility for annuity supplement.
CFR 5-848.501-2014 Administrative personnel. Part848:Phased retirement. SubpartE:Computation of phased retirement annuity at phased retirement and composite retirement annuity at full retirement. section848.501:Computation of phased retirement annuity.
CFR 46-308.103-2014 Shipping. Part308:War risk insurance. Section308.103:Insured amounts under interim binder.
CFR 46-308.203-2014 Shipping. Part308:War risk insurance. Section308.203:Amount insured under interim binder.
CFR 46-308.303-2014 Shipping. Part308:War risk insurance. Section308.303:Amounts insured under interim binder.
CFR 5-848.503-2014 Administrative personnel. Part848:Phased retirement. SubpartE:Computation of phased retirement annuity at phased retirement and composite retirement annuity at full retirement. section848.503:Cost-of-living adjustments.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, sem golden hour

GB/T 23600-2009 X-ray real-time radioscopic testing method for magnesium alloy castings
GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
GB/T 31310-2014(英文版) Metallic materials—Determination of residual stress—Hole drilling straingage method
GB/T 5158-1999 Metallic powders--Determination of loss of mass on hydrogen reduction (hydrogen loss)
GB/T 11020-2005 Flammability of solid non-metallic meterials when exposed to flame sources-List of test methods

Association of German Mechanical Engineers, sem golden hour

DVS 2103-2010
DVS 2103-1994
DVS 0907-1-1978 Determination of the burn-out pickup and burn-out of the submerged-arc welding flux in the welding of unalloyed and low-alloy steels with solid wire electrodes
DVS 0907-1-2006
DVS 0907-1-1994

国家市场监督管理总局、中国国家标准化管理委员会, sem golden hour

GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures

United States Navy, sem golden hour

NAVY MIL-DTL-60517 B-2004 INITIATOR, CARTRIDGE ACTUATED, M27 METAL PARTS ASSEMBLY
NAVY MIL-DTL-60519 B-2000 INITIATOR, CARTRIDGE ACTUATED, M53 METAL PARTS ASSEMBLY
NAVY MIL-DTL-60296 B-2005 INITIATOR, CARTRIDGE ACTUATED, DELAY, M10, M31, M32, M72, M114 METAL PARTS ASSEMBLY
NAVY MIL-DTL-60515 C-2005 INITIATOR, CARTRIDGE ACTUATED, DELAY, M30A1, M32A1, M43A1, M92, AND M120 METAL PARTS ASSEMBLY

国家能源局, sem golden hour

SY/T 7390-2017 Age-hardenable nickel-based alloys for oil and gas drilling equipment

British Standards Institution (BSI), sem golden hour

BS EN ISO 3927:2002 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
23/30469937 DC BS ISO 20937. Financial services. Specification of QR-codes for mobile (instant) credit transfers
BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS 7541:1992 Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage
BS EN 62374-1:2010 Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
BS 3B 32:2009 Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated)
BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
BS L 154:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)
BS 2L 98:1971 Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 97:1971 Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)

Association Francaise de Normalisation, sem golden hour

NF P93-523:2002 Building site equipment - Temporary metallic stairways intended for public use
NF P93-340:1994 Building site equipment. Temporary metallic building site railings.
NF EN ISO 13517:2020 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson)
NF EN ISO 4490:2018 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall)
NF C96-017-1*NF EN 62374-1:2011 Semiconductor devices - Part 1 : time-dependent dielectric breakdown (TDDB) test for inter-metal layers.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., sem golden hour

ASHRAE HI-02-5-2002 Symposium on CHP for Buildings - Is It Ready for Prime Time?

Korean Agency for Technology and Standards (KATS), sem golden hour

KS D ISO 4490:2010 Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS D ISO 4490:2013 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS D ISO 3927:2012 Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS M ISO 806:2003 Aluminium oxide primarily used for the production of aluminium-Determination of loss of mass at 1 000℃ and 1 200℃
KS D 0035-2011 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS M ISO 806:2013 Aluminium oxide primarily used for the production of aluminium－Determination of loss of mass at 1 000℃ and 1 200℃
KS M ISO 2813:2007 Paints and varnishes-Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
KS C IEC 60707:2004 Flammability of solid non-metallic materials when exposed to flame sources－List of test methods
KS C IEC 60707-2004(2014) Flammability of solid non-metallic materials when exposed to flame sources－List of test methods

US-FCR, sem golden hour

FCR NE-M-8-1T-1981 HELICAL AGE-HARDENABLE NICKEL-CHROMIUM-IRON ALLOY SPRINGS (INACTIVE FOR NEW DESIGN)
FCR DOE 3220.5A-1992 PAYMENT OF WAGES OR SALARIES TO COST-TYPE CONTRACTOR EMPLOYEES WHEN ACCESS AUTHORIZATION IS SUSPENDED

YU-JUS, sem golden hour

JUS C.A2.030-1990 Metaliic potfders, excluding powders for hardmetals. Determlnation of compactibi-llty (compresslbllity) in uniaxlal compression
JUS B.C1.029-2001 Calcium-sulfate - cement setting time regulator Classification and technical conditions

FI-SFS, sem golden hour

RO-ASRO, sem golden hour

STAS SR EN 10002-5-1995 Metaliic materials. Tensile testing. Part 5: Method of testing at elevated temperatura
STAS 11037-1978 Tests of metals TESTS TO DETERMINE THE COMPATIBILITY OF FILLER METAL IN THEGAS WELDING OF STEELS
STAS 6679/19-1985 METAL CUTTJNG MACHlNE-TOOI.S CIHECK1NG METHODS OF MINIMUM MOVEMENT TOLERAN- CE3 AT SUCCESIVE SETTlNGS

Professional Standard - Light Industry, sem golden hour

QB/T 3815-1999 Thickness testing method of the metal deposits for the light industrial products.Timekeeping of liquid flow method
QB/T 2268-1996 General technical requirements for finishing exterior parts of chronograph instruments Paint coatings for metal exterior parts of clocks

Aerospace, Security and Defence Industries Association of Europe (ASD), sem golden hour

ASD-STAN PREN 3349-2010 Aerospace series Magnesium alloy MG-C92 Solution treated and artificially aged (T6) Casting Edition P2

Professional Standard - Machinery, sem golden hour

JB/T 6651-1993 Powder metallurgy timing belt pulley for miniature car engine synchronous belt drive

Professional Standard - Water Conservancy, sem golden hour

SL 647-2013 Technology parameter selection and technical requirements of vibration stress relief for hydro steel structure

National Health Commission of the People's Republic of China, sem golden hour

GBZ/T 308-2018 Simultaneous Determination of Multiple Metals in Urine by Inductively Coupled Plasma Mass Spectrometry

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, sem golden hour

PREN 3349-2010 Aerospace series Magnesium alloy MG-C92 Solution treated and artificially aged (T6) Casting (Edition P2)
PREN 3123-1988 Aerospace Series Aluminium Alloy AL-C27 Solution Treated and Artificially Aged (T6) Structural Precision Castings (Issue P 1)
PREN 3125-1988 Aerospace Series Aluminium Alloy AL-C26 Solution Treated and Artificially Aged (T6) Structural Precision Castings (Issue P 1)
PREN 3349-1988 Aerospace Series Magnesium Alloy MG-C92 Solution Treated and Artificially Aged (T6) Casting (Issue P 1)

Lithuanian Standards Office , sem golden hour

LST EN 3351-2013 Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ? 150 mm
LST EN 3459-2010 Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ? 50 mm

ES-UNE, sem golden hour

UNE-EN 3315:2018 Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De = 75 mm (Endorsed by Asociación Española de Normalización in December of 2018.)
UNE-EN 62374-1:2010 Semiconductor devices -- Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (Endorsed by AENOR in March of 2011.)
UNE-EN 3351:2012 Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De <= 150 mm (Endorsed by AENOR in December of 2012.)
UNE-EN 3314:2019 Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D = 75 mm
UNE-EN 4193:2001 Aerospace series - Pipe coupling 8º30' in titanium alloy - Tees, reduced bulkhead on run long (Endorsed by AENOR in December of 2001.)

NL-NEN, sem golden hour

NEN-ISO 3927:1993 Metallic powders, excluding powders for hardmetals. Determiantion of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)

Defense Logistics Agency, sem golden hour

DLA SMD-5962-78008 REV H-2005 MICROCIRCUIT, DIGITAL, MOS CLOCK DRIVERS, MONOLITHIC SILICON
DLA SMD-5962-91641 REV A-2005 MICROCIRCUIT, DIGITAL, CMOS, REAL TIME CLOCK, MONOLITHIC SILICON
DLA SMD-5962-89503 REV H-2004 MICROCIRCUIT, LINEAR, CMOS, PRECISION TIMERS, MONOLITHIC SILICON
DLA SMD-5962-88599-1988 MICROCIRCUITS, DIGITAL, CMOS, TIMING CONTROL UNIT, MONOLITHIC SILICON
DLA MIL-PRF-22885/79 E VALID NOTICE 1-2012 Switches, Push Button, Illuminated, Momentary, SPDT and DPDT, One Lamp, 7 Ampere Silver Contacts, 1 Ampere Gold Contact
DLA SMD-5962-87653 REV A-1991 MICROCIRCUIT, MICROPROCESSOR, COMPATIBLE REAL-TIME CLOCK, CMOS MONOLITHIC SILICON

CU-NC, sem golden hour

NC 12-04-39-1987 Standards System for Protection Against Corrosion. Acid Corrosion Inhibitors. Methods for the Détermination of Protecting Capacity during Metal Acid Pickling

Danish Standards Foundation, sem golden hour

DS/ISO 2813:1984 Paints and varnishes. Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
DS/EN 60707:1999 Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
DS/EN 3351:2012 Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De <= 150 mm
DS/EN 62374-1/AC:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
DS/EN 62374-1:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers

CENELEC - European Committee for Electrotechnical Standardization, sem golden hour

EN 60707:1999 Flammability of Solid Non-Metallic Materials when Exposed to Flame Sources - List of Test Methods

Japanese Industrial Standards Committee (JISC), sem golden hour

JIS C 0066:2001 Flammability of solid non-metallic materials when exposed to flame sources -- List of test methods
JIS C 9300-6:2006 Arc welding equipment -- Part 6: Limited duty manual metal arc welding power sources

CEN - European Committee for Standardization, sem golden hour

EN 3315:2018 Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De ≤ 75 mm
EN 3314:2019 Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm

European Committee for Standardization (CEN), sem golden hour

EN ISO 3927:2001 Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression ISO 3927:2001; Supersedes EN 23927:1993
EN 348:1992 Protective Clothing - Determination of Behaviour of Materials on Impact of Small Splashes of Molten Metal
prEN 2032-2-1985 Aerospace series; metallic materials; part 2: coding of material in delivery heat treatment conditions

AENOR, sem golden hour

UNE-EN 60707:2000 FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS

Xinjiang Provincial Standard of the People's Republic of China, sem golden hour

DB65/T 3971-2017 Simultaneous Determination of Multiple Heavy Metals in Vegetables and Fruits by Plasma Mass Spectrometry

HU-MSZT, sem golden hour

BE-NBN, sem golden hour

NBN-EN 348-1993 Protective clothing. Test method: Determination of behaviour of materials on impact of small splashes of molten metal

未注明发布机构, sem golden hour

BS EN 62374-1:2010(2011) Semiconductor devices Part 1 : Time - dependent dielectric breakdown (TDDB) test for inter - metal layers

ES-AENOR, sem golden hour

UNE 14 022

Professional Standard - Electricity, sem golden hour

DL/T 330-2010 Ultrasonic time of flight diffraction technique in welded joints of hydroelectric or hydraulic engineering steel structure and equipment
DL/T 330-2021 Diffraction time-of-flight ultrasonic testing of metal structures and equipment welded joints in hydropower and water conservancy projects

The American Road & Transportation Builders Association, sem golden hour

AASHTO DIVISION I 10.8 Minimum Thickness of Metal Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)