ZH

RU

ES

cable connector

cable connector, Total:215 items.

In the international standard classification, cable connector involves: Electrical accessories, Shipbuilding and marine structures in general, Electrical equipment for working in special conditions, Nuclear energy engineering, Components and accessories for telecommunications equipment, Fibre optic communications, Electromechanical components for electronic and telecommunications equipment, Mining equipment, Road vehicle systems, Radiocommunications, Rubber and plastics products, Fasteners for aerospace construction, Welding, brazing and soldering, Mining and quarrying, Aerospace electric equipment and systems.


Taiwan Provincial Standard of the People's Republic of China, cable connector

Professional Standard-Ships, cable connector

SE-SIS, cable connector

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, cable connector

  • GB/T 9538-1988 General specification of flat cable connector
  • GB/T 5964-2008 Coaxial cable connectors used in nuclear instrumentation
  • GB 9539-1988 Detail specification for electronic components, type DC2 ribbon cable connectors

Professional Standard - Machinery, cable connector

  • JB/T 5350-1991 Flameproof cable connectors intended to be used in mines

机械电子工业部, cable connector

International Electrotechnical Commission (IEC), cable connector

  • IEC 60313:1983 Coaxial cable connectors used in nuclear instrumentation
  • IEC 61726:2022 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • IEC 61169-26:2013 Radio frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors
  • IEC 61726:1999 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • IEC 61726:2015 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • IEC PAS 61169-44:2010 Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors
  • IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
  • IEC 60169-10:1983 Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
  • IEC 60169-10:1983/AMD1:1986 Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
  • IEC 60169-10:1983/AMD2:1996 Radio frequency connectors - Part 10: RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (type SMB); Amendment 2
  • IEC 61274-1-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification
  • IEC 60874-1-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification

Korean Agency for Technology and Standards (KATS), cable connector

  • KS C 6809-1992 General rules of connectors for radio frequency coaxial cables
  • KS C IEC 60974-12:2003 Arc-welding equipment-Part 12:Coupling devices for welding cables
  • KS C IEC 60974-12:2014 Arc-welding equipment — Part 12: Coupling devices for welding cables
  • KS C IEC 60974-12:2016 Arc-welding equipment — Part 12: Coupling devices for welding cables
  • KS C IEC 60874-14-1:2003 Connectors for optical fibres and cables-Part 14-1:Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
  • KS C IEC 60874-14-2:2003 Connectors for optical fibres and cables-Part 14-2:Detail specification for fibre optic connector type SC-PC tuned terminated to single-mode fibre type B1
  • KS C IEC 60874-14-7:2003 Connectors for optical fibres and cables-Part 14-7:Detail specification for fibre optic connector type SC-APC 9° tuned terminated to single-mode fibre Type B1
  • KS C 6808-1997 C11 type connectors for radio frequency coaxial cables
  • KS C 6806-1997 C04 type connectors for radio frequency coaxial cables
  • KS C 6804-1997 C02 type connectors for radio frequency coaxial cables
  • KS C 6807-1997 C05 Type connectors for radio frequency coaxial cables
  • KS C 6805-1997 C03 type connectors for radio frequency coaxial cables
  • KS C 6803-1997 C01 type connectors for radio frequency coaxial cables

Japanese Industrial Standards Committee (JISC), cable connector

Professional Standard - Petroleum, cable connector

  • SY/T 6548-2003 Specification for use and maintenance of loaded cable and bridle in oil field
  • SY/T 6548-2011 The use and maintenance of petroleum well-logging cable and bridle

Professional Standard - Electron, cable connector

  • SJ/T 11133-1997 Generic specification for Flexible flat cables connectors
  • SJ/T 10983-1996 Detailed specifications for DC2 flat cable connectors
  • SJ/T 11134-1997 Detail specification for flexible flat cables connectors,1.25mm pitch,type DCB1
  • SJ 20525-1995 Connectors,electrical and fiber optic,packaging of,specification for

American National Standards Institute (ANSI), cable connector

German Institute for Standardization, cable connector

  • DIN 72332-1:1977-11 Cable connectors for starter batteries; soldering terminals
  • DIN EN 61726:2000 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999); German version EN 61726:2000
  • DIN EN 60847-1:2007 Connectors for optical fibres and cables- Part 1: Generic specification (IEC 60874-1:2006); German version EN 60874-1:2007
  • DIN EN 61726:2016 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:2015); German version EN 61726:2015
  • DIN EN 60874-1-1 Berichtigung 1:2012-11 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification (IEC 60874-1-1:2011); German version EN 60874-1-1:2012, Corrigendum to DIN EN 60874-1-1:2012-09
  • DIN EN 60874-1-1:2012-09 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification (IEC 60874-1-1:2011); German version EN 60874-1-1:2012 / Note: DIN EN 60874-1-1 (2007-06) remains valid alongsi...
  • DIN 72331-2:1979-02 Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2>
  • DIN 72331-1:1979-02 Cable connectors for starter batteries; screw terminals for conductor cross sections up to 70 mm<(hoch)2>
  • DIN 72331-2:1979 Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2>

Defense Logistics Agency, cable connector

United States Navy, cable connector

Professional Standard - Coal, cable connector

  • MT/T 947-2005 Flameproofhigh-Voltage cable coupling devices for coal mine

未注明发布机构, cable connector

  • BS EN 186150:1997 Connector sets for optical fibres and cables — Type OCCA - BU
  • BS AU 16a:1989(1999) Specification for Electrical cable connectors (17.5 A maximum continuous rating)
  • BS EN 186240:1996(2000) Harmonized system of quality assessment for electronic components Sectional specification : Connector sets for optical fibres and cables — Type MT
  • BS EN 186110:1995(1999) Harmonized system ofquality assessment for electronic components Sectional specification — Connector sets for optical fibres and cables — Type FC
  • BS EN 186210:1996(2000) Harmonized system of quality assessment for electronic components Sectional specification : Connector sets for optical fibres and cables — Type CF08
  • BS EN 186180:1996(2000) Harmonized system of quality assessment for electronic components Sectional specification : Connector sets for optical fibres and cables — Type LSB
  • BS EN 186130:1996(2000) Harmonized system of quality assessment for electronic components Sectional specification : Connector sets for optical fibres and cables — Type LSA
  • BS EN 186100:1995(1999) Harmonized system ofquality assessment for electronic components Sectional specification : Connector sets for optical fibres and cables — Types F - SMA
  • BS AU 91:1965(2000) Specification for Dimensions of electrical cable connectors for starter battery taper terminal posts — (Cars and light commercial vehicles using positive earth system)
  • BS EN 186006-1:1996 Harmonized system of quality assessment for electronic components — Blank detail specification — Connectors for optical fibres and cables for military use — Environmental category VI
  • BS EN 186002:1994(2000) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Connector for optical fibres and cables — Environmental category II

FI-SFS, cable connector

Military Standard of the People's Republic of China-General Armament Department, cable connector

  • GJB 2281-1995 General specification for ribbon cable electrical connectors

Society of Automotive Engineers (SAE), cable connector

SAE - SAE International, cable connector

European Committee for Electrotechnical Standardization(CENELEC), cable connector

  • EN 186300:1999 Sectional Specifications: Connector Sets for Optical Fibres and Cables Type MSC
  • EN 186270:1997 Sectional specification: Connector sets for optical fibres and cables Type LSH
  • EN 61726:2015 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • EN 60874-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification

British Standards Institution (BSI), cable connector

  • BS IEC 60313:2002 Coaxial connectors used in nuclear laboratory instrumentation
  • BS AU 16a:1989 Specification for electrical cable connectors (17.5 A maximum continuous rating)
  • BS EN 61169-26:2013 Radio-frequency connectors. Sectional specification for TNCA series RF coaxial connectors
  • BS 3905:1995 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines
  • BS EN 60874-19:1997 Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type SC-D (Duplex)
  • BS EN 61726:2015 Cable assemblies, cables, connectors and passive microwave components. Screening attenuation measurement by the reverberation chamber method
  • BS EN 61726:2000 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • BS EN 60874-17:1997 Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type F-05 (friction lock)
  • 21/30438753 DC BS EN IEC 61726. Cable assemblies, cables, connectors and passive microwave components. Screening attenuation measurement by the reverberation chamber method
  • BS EN IEC 61726:2022 Tracked Changes. Cable assemblies, cables, connectors and passive microwave component. Screening attenuation measurement by the reverberation chamber method
  • BS IEC 60874-14-3:1997 Connectors for optical fibres and cables - Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre
  • BS IEC 60874-14-4:1997 Connectors for optical fibres and cables - Detail specification for fibre optic adaptor (simplex) type SC for multimode fibre
  • BS EN 186260:1998 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC
  • BS IEC 60874-14-5:1997 Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1
  • BS IEC 60874-14-1:1997 Connectors for optical fibres and cables. Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
  • BS 3454:1995 Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines
  • BS IEC 60874-14-1:1998 Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
  • BS 7019:1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
  • BS EN 62037-3:2012 Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in coaxial connectors

ECIA - Electronic Components Industry Association, cable connector

  • RS-297-A-1970 Cable Connectors for Audio Facilities for Radio Broadcasting

ZA-SANS, cable connector

  • SANS 60874-1:2007 Connectors for optical fibres and cables Part 1: Generic specification
  • SANS 60874-1-1:2007 Connectors for optical fibres and cables Part 1-1: Blank detail specification

工业和信息化部, cable connector

  • YD/T 3352-2018 Retractable sleeves for RF coaxial cable connector protection

Electronic Components, Assemblies and Materials Association, cable connector

  • ECA 297-A-1970 Cable Connectors for Audio Facilities for Radio Broadcasting Correction Sheet
  • ECA EIA-403-A-1990 Precision Coaxial Connectors for CATV Application (75 Ohms)

Underwriters Laboratories (UL), cable connector

  • UL 1682 BULLETIN-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682 BULLETIN-2003 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682 BULLETIN-2001 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682 BULLETIN-2004 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Second Edition)
  • UL 1682-2017 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Fifth Edition)
  • UL 1682-2007 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Third Edition)
  • UL 1682 BULLETINS-2001 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (10/05/2001 (76p); 01/31/2001 (80p))
  • UL 1682 BULLETINS-2006 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (10/13/2006 (70p); 04/20/2006 (68p))
  • UL SUBJECT 2736-2010 OUTLINE OF INVESTIGATION FOR SINGLE POLE SEPARABLE INTERCONNECTING CABLE CONNECTORS FOR USE WITH WIND TURBINE GENERATING SYSTEMS (Issue 1)
  • UL 1682 BULLETIN-2015 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: December 16@ 2015)
  • UL 1682 BULLETIN-2016 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: November 28@ 2016)
  • UL 1682 BULLETIN-2011 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: AUGUST 22@ 2011)
  • UL 1682 BULLETIN-2012 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: May 21@ 2012)
  • UL 1682 BULLETIN-2013 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: March 06@ 2013)

RU-GOST R, cable connector

  • GOST 13781.0-1986 Power cable couplings for tension up to 35 kV including. General technical requirements

Standard Association of Australia (SAA), cable connector

  • AS 1300:1989 Electrical equipment for coal mines - Bolted flame-proof cable coupling devices

Canadian Standards Association (CSA), cable connector

Danish Standards Foundation, cable connector

  • DS/IEC 874-15:1995 Connectors for optical fibres and cables -Part 15: Sectional specification for fibre optic connector - Type DS
  • DS/EN 60874-19:1998 Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex)
  • DS/EN 60874-17:1998 Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock)
  • DS/EN 60874-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
  • DS/EN 60874-1-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
  • DS/IEC 874-3:1992 Connectors for optical fibres and cables. Part 3: Sectional specification. Fibre optic connector type CFO3
  • DS/IEC 874-4:1992 Connectors for optical fibres and cables. Part 4: Sectional specification. Fibre optic connector type CFO4
  • DS/IEC 874-5:1992 Connectors for optical fibres and cables. Part 5: Sectional specification. Fibre optic connector type BAM
  • DS/IEC 874-6:1992 Connectors for optical fibres and cables. Part 6: Sectional specification. Fibre optic connector type BACS
  • DS/IEC 874-7:1992 Connectors for optical fibres and cables. Part 7: Sectional Specification. Fibre optic connector type FC
  • DS/IEC 874-8:1992 Connectors for optical fibres and cables. Part 8: Sectional Specification. Fibre optic connectors type D
  • DS/EN 186300:1999 Sectional Specification: Connector sets for optical fibres and cables - Type MSC
  • DS/EN 186260:1998 Sectional Specification: Connector sets for optical fibres and cables - Type SC
  • DS/EN 186270:1998 Sectional Specification: Connector sets for optical fibres and cables - Type LSH
  • DS/EN 186290:1998 Sectional Specification: Connector sets for optical fibres and cables - Type MPO
  • DS/IEC 874-9:1992 Connectors for optical fibres and cables. Part 9: Sectional Specification. Fibre optic connector type OF-2

Association Francaise de Normalisation, cable connector

  • NF C93-586*NF EN 61726:2018 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • NF EN IEC 60794-2-30:2019 Câbles à fibres optiques - Partie 2-30 : câbles intérieurs - Spécification de famille pour les câbles à rubans de fibres optiques utilisés dans les assemblages de câbles connectorisés
  • NF C93-833*NF EN 60874-19:1997 Connectors for optical fibres and cables. Part 19 : sectional specification for fibre optic connector. Type SC-D(uplex).
  • NF C93-586:2013 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • NF C93-560-26*NF EN 61169-26:2013 Radio-frequency connectors - Part 26 : sectional specification for TNCA series RF coaxial connectors
  • NF EN 60874-1:2012 Dispositifs d'interconnexion et composants passifs à fibres optiques - Connecteurs pour fibres et câbles optiques - Partie 1 : spécification générique
  • NF EN IEC 61726:2022 Cordons, câbles, connecteurs et composants hyperfréquence passifs - Mesurage de l'affaiblissement d'écran par la méthode de la chambre réverbérante
  • NF EN 60874-1-1:2012 Dispositifs d'interconnexion et composants passifs à fibres optiques - Connecteurs pour fibres et câbles optiques - Partie 1-1 : spécification particulière cadre
  • NF C93-833-1:2007 Connectors for optical fibres and cables - Part 1 : generic specification.
  • NF C93-825*NF EN 186220:1995 Sectional specification. Connector sets for optical fibres and cables. Type lsc.
  • NF C93-826*NF EN 186230:1995 Sectional specification. Connector sets for optical fibres and cables. Type lsf.
  • NF A85-009-12:2005 Arc welding equipement - Part 12 : coupling devices for welding cables.
  • NF A85-009-12:1997 Arc welding equipment. Part 12 : coupling devices for welding cables.
  • NF EN 60603-9:1998 Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 9 : connecteurs pour cartes imprimées enfichables, connexions fond de panier et connecteurs de câble, pour grille de base de 2,54 mm (0,1 in).
  • NF EN 186230:1995 Spécification intermédiaire - Jeux de connecteurs pour fibres et câbles optiques type LSF.

IPC - Association Connecting Electronics Industries, cable connector

  • IPC FC-219-1984 Environmentally Sealed Flat Cable Connectors for Use in Aerospace Applications

Group Standards of the People's Republic of China, cable connector

  • T/CES 184-2022 Technical guide for configuration of quick plug-pull cable connectors for medium and low voltage distribution networks

AENOR, cable connector

  • UNE-EN 61726:2001 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method.

ES-UNE, cable connector

  • UNE-EN 61726:2016 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
  • UNE-EN IEC 61726:2022 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (Endorsed by Asociación Española de Normalización in November of 2022.)
  • UNE-EN 60874-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification (Endorsed by AENOR in May of 2012.)
  • UNE-EN 60874-1-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification (Endorsed by AENOR in April of 2012.)

CENELEC - European Committee for Electrotechnical Standardization, cable connector

  • EN 186006-1:1995 Blank Detail Specification: Connectors for Optical Fibres and Cables for Military Use Environmental Category VI
  • EN 61726:2000 Cable Assemblies@ Cables@ Connectors and Passive Microwave Components Screening Attenuation Measurement by the Reverberation Chamber Method
  • EN 186310:1999 Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type MF
  • EN 60874-1-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
  • EN 186170:1998 Sectional Specification: Connector Sets for Optical Fibres and Cables - Type RCC
  • EN 186110:1994 Sectional Specification: Connector Sets for Optical Fibres and Cables Type FC
  • EN 186210:1992 Sectional Specification: Connector Sets for Optical Fibres and Cables Type CF08
  • EN 186180:1994 Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSB
  • EN 186160:1997 Sectional Specification: Connector Sets for Optical Fibres and Cables Type OCCA-PC

NEMA - National Electrical Manufacturers Association, cable connector

  • NEMA PR 4-1983 Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type for Industrial Use

IEC - International Electrotechnical Commission, cable connector

  • IEC TR 61726:1995 Cable Assemblies@ Cables@ Connectors and Passive Microwave Components - Screening Attenuation Measurement by the Reverberation Chamber Method (Edition 1.0)

IN-BIS, cable connector

IECQ - IEC: Quality Assessment System for Electronic Components, cable connector

  • QC 210800-1990 Connectors for Optical Fibres and Cables Part 9: Sectional Specification Fibre Optic Connector Type OF-2 (IEC 874-9 ED 1)
  • QC 210100-1989 Connectors for Optical Fibres and Cables Part 2: Sectional Specification; Fibre Optic Connector Type F-SMA (IEC 874-2 ED 1)
  • QC 910100-1993 Connectors for Optical Fibres and Cables Part 2: Sectional Specification for Fibre Optic Connector - Type F-SMA; (IEC 874-2 ED 2) (Corrigendum-1996)
  • QC 911500-1993 Connectors for Optical Fibres and Cables - Part 12: Sectional Specification for Fibre Optic Connector - Type OCCA-BU; (IEC 874-12 ED 1) (Corrigendum-1996)
  • QC 212100-1995 Connectors for Optical Fibres and Cables - Part 19: Sectional Specification for Fibre Optic Connector - Type SC-D(uplex) (First Edition; IEC 60874-19; Corrigendum: 05/1996)

GB-REG, cable connector

  • REG NASA-LLIS-0070-1992 Lessons Learned - 480 Volt Power Cable Connectors and Mating Tool; Emergency Cut Off Device for the 480 Volt Power Cables

CU-NC, cable connector

  • NC 61-37-1987 Telecommunications. Fault Locator Transmitter in Telephone Cable Couples. Jiki Transmitter. Testing Method

Lithuanian Standards Office , cable connector

  • LST EN 60874-19-2002 Connectors for optical fibres and cables. Part 19: Sectional specification for fibre optic connector. Type SC- D(uplex) (IEC 60874-19:1995+AC:1996)
  • LST EN 60874-1-2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables -- Part 1: Generic specification (IEC 60874-1:2011)
  • LST EN 60874-17-2002 Connectors for optical fibres and cables. Part 17: Sectional specification for fibre optic connector. Type F- 05 (friction lock) (IEC 60874-17:1995+AC:1996)
  • LST EN 60874-1-1-2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables -- Part 1-1: Blank detail specification (IEC 60874-1-1:2011)

TH-TISI, cable connector

  • TIS 1621-1998 Radio.frequency connectors.part 9: r.f.coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap.on coupling.characteristic impedance 50 ohms (type smb)
  • TIS 1630-1998 Radio.frequency connectors.part 19: r.f. coaxial connectors with inner diameter of outer conductor 2.08 mm.(0.082 in) with snap coupling.charecteristic impedance 50 ohms (type ssmb)

国家能源局, cable connector

  • SY/T 6548-2018 Technical specifications for the use of petroleum logging cables and connectors

U.S. Air Force, cable connector





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved