ZH
RU
ES

Carbon Metal Instruments

Carbon Metal Instruments, Total:500 items.

In the international standard classification, Carbon Metal Instruments involves: Environmental testing, Rubber and plastics products, Analytical chemistry, On-board equipment and instruments, Testing of metals, Ferroalloys, Surface treatment and coating, Optics and optical measurements, Resistors, Non-destructive testing, Mining equipment, Shipbuilding and marine structures in general, Dentistry, Coals, Bottles. Pots. Jars, Road vehicles in general, Air quality, Medical equipment, Iron and steel products, Finances. Banking. Monetary systems. Insurance, Powder metallurgy, Welding, brazing and soldering, Materials for the reinforcement of composites, Fuels, Capacitors, Cutting tools, Alarm and warning systems, Materials and articles in contact with foodstuffs, Glass, Ceramics, Heat treatment, Linear and angular measurements, Paint coating processes, Pipeline components and pipelines, Nuclear energy engineering, Petroleum products in general, Electrical and electronic testing, Industrial automation systems, Electrical accessories, Sterilization and disinfection, Aircraft and space vehicles in general, Metrology and measurement in general, Non-ferrous metals, Materials for aerospace construction, Ferrous metals, Mechanical testing, Lubricants, industrial oils and related products, Cans. Tins. Tubes, Cargo equipment, Barrels. Drums. Canisters, Aerospace electric equipment and systems, Inorganic chemicals, Motor cycles and mopeds, Aerospace fluid systems and components.

American Society for Testing and Materials (ASTM), Carbon Metal Instruments

ASTM G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-04 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-04 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-00a Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-00 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-00ae1 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E2298-09 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2298-13a Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM A121-13(2017) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A1003/A1003M-10 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-13b Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A562/A562M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-10(2021) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A1003/A1003M-13 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-13a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-11e1 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-12 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM G155-00a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-00 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-00ae1 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-04 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-05 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-05a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-13 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM A121-07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A121-19 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A121-22 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A121-13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A562/A562M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-10(2015) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM D5373-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-02(2007) Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-93(2002) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-93(1997) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM G154-04 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM A1003/A1003M-01 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-02 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-09 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-14 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-15 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-11 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00ae1 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00a Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM A787/A787M-15a Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM A787/A787M-09 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM A787/A787M-14 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM E50-90 Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM E50-82(1986) Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM E1009-95(2006) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
ASTM F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
ASTM E2298-18 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D5373-08 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
ASTM A787-05 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM G79-83(1996)e1 Standard Practice for Evaluation of Metals Exposed to Carburization Environments (Withdrawn 2005)
ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM E50-17 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E251-92(2014) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E50-11 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM G153-13(2021) Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

IN-BIS, Carbon Metal Instruments

Professional Standard - Aviation, Carbon Metal Instruments

HB 8282-2002 Non-metal bush with flange for instrument
HB 8110-2002 Nonmetal smooth bush
HB 8276-2002 Metal plain bush used for instrument (8276)
HB 8277-2002 Metal plain bush used for instrument (8277)
HB 8278-2002 Metal plain bush used for instrument (8278)
HB 8279-2002 Metal plain bush used for instrument (8279)
HB 8280-2002 Metal plain bush used for instrument (8280)
HB 8281-2002 Metal plain bush used for instrument (8281)
HB/Z 352-2002 Stabilizing treatment for metallic parts of precise equipment & instrument for aviation

RU-GOST R, Carbon Metal Instruments

GOST 11679.2-1976 Rubber-metal shock-absorbers for instruments. Fitting. Specifications
GOST 11679.1-1976 Rubber-metal shock-absorbers for instruments. Specifications
GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon
GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST 17535-1977 Metal high precision parts of devices. Dimension stabilisation by heat treatment. Typical technological processes
GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods

GOSTR, Carbon Metal Instruments

GOST 11679.2-2019 Rubber-metal instrument shock-absorbers. Fittings. Specifications
GOST 11679.1-2018 Rubber-metal instrument shock-absorbers. Specifications

Japanese Industrial Standards Committee (JISC), Carbon Metal Instruments

JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
JIS B 7755:1993 Impact testing machines for metallic materials -- Instrumentation
JIS Z 2615:1996 General rules for determination of carbon in metallic materials
JIS T 5504-1:2001 Dental rotary instruments -- Shanks -- Part 1: Shanks made of metals
JIS T 5504-1:2014 Dental rotary instruments .Shanks.Part 1: Shanks made of metals
JIS Z 3183:2012 Classification for deposited metal of submerged arc welding for carbon steel and low alloy steel
JIS Z 2615:2009 General rules for determination of carbon in metallic materials
JIS Z 2615:2015 General rules for determination of carbon in metallic materials
JIS Z 2615 AMD 1:2006 General rules for determination of carbon in metallic materials (Amendment 1)
JIS Z 3183:1993 Classification and testing methods for deposited metal of submerged arc welding for carbon steel and low alloy steel
JIS G 1323-1:2017 Method for chemical analysis of chromium metal -- Part 1: Determination of carbon content
JIS C 1613:2007 High irradiance ultraviolet radiometers of the metalhalide lamp type exposure apparatus
JIS G 1322-2:2010 Method for chemical analysis of metallic silicon -- Part 2: Methods for determination of carbon content

Korean Agency for Technology and Standards (KATS), Carbon Metal Instruments

KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
KS C 5116-2003 Fixed carbon composition resistors for use in electronic equipment
KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
KS D 1780-1993 General rules for determination of carbon in metallic materials
KS D 1780-2016 General rules for determination of carbon in metallic materials
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS X ISO 10962:2006 Securities and related financial instruments－Classification of Financial Instruments(CFI code)
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS C IEC 60695-2-10:2001 Fire hazard testing－Part 2－10：Glowing/hot-wire based test methods：Glow-wire apparatus and common test procedure
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS D ISO 11873:2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
KS D ISO 11873-2011(2016) Hardmetals－Determination of sulfur and carbon contents in cobalt metal powders－Infrared detection method
KS B 0531-1994(2009) Classification and testing methods for deposited metal of submerged arc welding for carbon steel and low alloy steel
KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS B ISO 376-2002(2012) Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS D ISO 11873:2011 Hardmetals－Determination of sulfur and carbon contents in cobalt metal powders－Infrared detection method
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS M 2418-2006 Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS W 1122-2004 Shot peening of metal parts for aircraft
KS W ISO 2032:2002 Heat-resisting equipment wires for aircraft
KS W ISO 2032:2014 Heat-resisting equipment wires for aircraft
KS P ISO 6360-4:2020 Dentistry — Number coding system for rotary instruments —Part 4: Specific characteristics of diamond instruments
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS W 2017-2008 Surface treatments and inorganic coatings for metal surfaces of aircrafts systems
KS W 2017-1983 Surface treatments and inorganic coatings for metal surfaces of aircrafts systems
KS B ISO 148-2-2004(2009) Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines

German Institute for Standardization, Carbon Metal Instruments

DIN 12893:1976 Metal laboratory ware; stand rods
DIN 12894:1997 Metal laboratory ware - Clamps
DIN 12895-2:1978 Metal laboratory ware; hook connector
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN ISO 7153-1:2001 Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); English version of DIN EN ISO 7153-1:2001-02
DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011 / Note: DIN EN ISO 376 (2005-02) remains valid alongside this standard until 2011-12-31.
DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
DIN EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; German version EN 13523-3:2001
DIN 49073-1:1990 Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions
DIN 58952-3:2012 Sterilization - Transport baskets for sterile barrier systems - Part 3: Instrument trays for sterilizing goods made of metal
DIN EN 131700:1998 Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric; German version EN 131700:1997
DIN 58952-3:1977 Sterilization; packing materials for sterilizing goods, instrument trays made of metal
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN V 65579:1991 Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 131700:1998-10 Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric; German version EN 131700:1997
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN 131701:1998 Blank detail specification - Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level E; German version EN 131701:1997
DIN 8562:1975 Welding of Vessels; Vessels of Metallic Materials, Principles for Welding
DIN EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison; German version EN 13523-3:2014
DIN 51732:2014 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN 51732:2007 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 13523-3:2020 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2020

Professional Standard - Military and Civilian Products, Carbon Metal Instruments

WJ 1855-1989 Gold electroplating for metal cladding optical instruments
WJ 461-1995 Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument
WJ 464-1995 Metal coating. Specifications for ferrous metal phosphate coating coatings of optical instrument
WJ 651-1995 Specification for non-ferrous alloy metal mold castings for optical instruments
WJ 467-1995 Metal and non-metal coatings Pre-painting surface preparation for optical instrument
WJ 2016-1991 Metallic and non-metallic coatings Stainless steel passivation film for military optical instruments
WJ 2015-1991 Aluminum and aluminum alloy chemical conversion coatings for metal and non-metal coatings for military optical instruments
WJ 466-1995 Metal coating. Specifications for paint coatings of optical instrument
WJ 455-1995 Metal coating. Specifications for nickel electroplated coatings of optical instrument
WJ 456-1995 Metal coating. Specifications for chromium electroplated coatings of optical instrument
WJ 457-1995 Metal coating. Specifications for cadmium electroplated coatings of optical instrument
WJ 458-1995 Metal coating. Specifications for zinc electroplated coatings of optical instrument
WJ 459-1995 Metal coating. Specifications for silver electroplated coatings of optical instrument
WJ 460-1995 Metal coating. Specifications for tin electroplated coatings of optical instrument
WJ 465-1995 Metal coating. Specifications for copper electroplated coatings of optical instrument
WJ 454-1995 Metal coating. Specifications for black nickel electroplated coatings of optical instrument

Defense Logistics Agency, Carbon Metal Instruments

DLA DSCC-DWG-89062 REV B-2006 CAPACITORS, FIXED, METALLIZED POLYCARBONATE, NON HERMETICALLY SEALED
DLA MIL-DTL-87218 D (2)-2007 CABLE, LOCKCLAD, FOR AIRCRAFT CONTROL

SE-SIS, Carbon Metal Instruments

SIS SS 06 40 25-1985 Metal arc welding with covered electrodes of carbon, carbon manganese and microalloyed steels
SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests
SIS SS 06 13 01-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels, microalloyed steel and low-alloyed steels — Weld metal test specimens for all-weld-metal tests
SIS MNC 990-1990 Welding electrodes — Tubular wires for gas metal are welding and metal are welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
SIS SS 06 01 41-1990 Welding electrodes — Tubular wires for gas metal arc welding and metal arc welding of carbon steels, carbon-manganese steels and microalloyed steels — Technical requirements for inspection and deliver/
SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
SIS SS 06 11 02-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyedsteel, microalloyed steel and low-alloyed steel — Welds and v/eld meta! bars for butt weld tests
SIS MNC 980 E-1984 Welding electrodes - Wire electrodes for gas metal arc welding of carbon steel, carbon manganese alloyed steel and microalloyed steel with increased yield strength - Summary
SIS SS CECC 30500-1987 Sectional specification: Fixed matallizedpolycarbonate film dielectric capacitors for direct current
SIS SS 06 10 01-1979 Welding electrodes — Covered electrodes for manual metal-arc welding and gravity welding of carbon steels, carbon-manganese steels, fine grained steels with increased yield stress and low- alloyed steels — Weld metal test pieces
SIS SS 06 11 02-1984 Welding electrodes — Wire electrodes for gas metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel with increased yield strength and low alloyed steel - Welds and weld metal bars for butt weld tests
SIS MNC 980-1984 Welding electrodes — Wire electrodes for gas meta/ are welding of carbon steel, carbon-manganese alloyed steel and microalloyed steel with increased yield strength
SIS SS CECC 31700-1986 Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
SIS SS CECC 30501-1991 Blank detail specification: Fixed metallized polycarbonate film dielectric capacitors for direct current
SIS SS 06 10 02-1979 Welding electrodes — Covered electrodes for manual metal-arc welding and gravity welding of carbon steels, carbon-manganese steels, fine grained steels with increased yield stress and low-alloyed steels — Welds and test pieces for testing of butt welds
SIS SS 06 10 03-1979 Welding electrodes — Penetration electrodes for manual metal-arc welding of carbon and carbon manganese steels — Welds and test pieces for testing of butt welds
SIS SS CECC 31701-1986 Blank detail specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
SIS MNC 970 E-1979 Welding electrodes — Covered electrodes for manual metal-arc welding and gravity welding of carbon steels, carbon manganese steels and fine grained steels with increased yield stress — Summary
SIS MNC 970-1979 Welding electrodes — Covered electrodes for manual metal-arc welding and gravity welding of carbon steels, carbon manganese steels and fine g ra i ned steels with increased yield stress

Association Francaise de Normalisation, Carbon Metal Instruments

NF ISO 1651:1995 Mandrins d'étirage de tubes, à noyau en métaux-durs (carbures métalliques) - Dimensions.
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF ISO 242:2014 Plaquettes à braser en carbures métalliques pour outils de tour
NF T25-107:2011 Carbon fibers - Chemical analysis - Determination of metal impurities.
NF A95-113:1984 Powder metallurgy. Metallic powders. Determination of flowability by means of a calibrated funnel (hall flowmeter).
NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique
NF EN ISO 7625:2012 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des échantillons pour analyse chimique en vue du dosage du carbone
NF A03-003*NF EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.
NF T25-112:2011 Carbon fibers - Chemical analysis - Determination of the metalloid elements.
NF ISO 504:1995 Outils de tour à plaquettes en carbures métalliques - Désignation et marquage.
NF A09-320:1984 NON DESTRUCTIVE TESTING. MANUAL ULTRASONIC INSPECTION OF METALLIC PRODUCTS. SIMPLE IN-SERVICE CHECKING OF APPARATUS CHARACTERISTICS.
NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
NF EN 13029:2010 Emballage - Emballages métalliques légers - Ouverture de récipients métalliques équipés de goulots en matière plastique
NF T37-001-3:2014 Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison
NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.
NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
NF EN ISO 14556:2023 Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté
NF A95-348:1984 Powder metallurgy. Sintered ferrous materials, carburized or carbonitried. Determination of effective case depth by the Vickers microhardness testing method.
NF X34-117:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods.
NF A03-015*NF EN ISO 14556:2015 Metallic maerials - Charpy V-notch pendulum impact test - Instrumented test method
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF L93-711:1961 Watertight reusable metal containers.
NF ISO 883:2014 Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe, sans trou de fixation - Dimensions
NF A02-052:2021 Tools and mechanical parts - Nitriding and nitrocarburizing of ferrous products

BE-NBN, Carbon Metal Instruments

NBN 403-1968
NBN C 73-335-32-1985
NBN 861-1971
NBN C 73-335-26-1982
NBN-EN 23908-1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method (ISO 3908: 1985)
NBN C 73-335-28-1985
NBN C 73-335 FASC.4-1981
NBN C 73-335-24 ADD 1-1985
NBN C 73-335-15-1987
NBN C 73-335-11-1982
NBN C 73-335-21-1982
NBN C 73-335-30-1988
NBN C 73-335-23 ADD 1-1994
NBN C 73-255 ADD 1-1988
NBN C 73-342-1-1987
NBN C 73-335-31-1985
NBN C 73-335-31 ADD 1-1988
NBN C 73-704-1-1984
NBN C 73-335-10-1987
NBN C 73-180 ADD 1-1979
NBN C 73-335-8-1987
NBN-EN 23907-1993 Hardmetals. Determination of total carbon content. Gravimetric method (ISO 3907: 1985)
NBN C 73-170 ADD 1-1979
NBN C 73-195 ADD 1-1979
NBN 618-1969
NBN C 73-335-33-1985
NBN C 73-335-13-1987
NBN C 73-299-1979
NBN C 73-160 ADD 1-1979
NBN C 73-335-1981

PL-PKN, Carbon Metal Instruments

PN H92601-1971 Carbon steel Wire rod for po?ented wire
PN H04707-1991 Non-ferrous metals and alloys. Determination of carbon content
PN H04232-03-1986 Chemical analysis of alloy components Chromium metallic Determination of carbon

Professional Standard - Machinery, Carbon Metal Instruments

JB/T 11605-2013 Non-destructive testing instruments.Metal magnetic memory instrument specification
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification

Professional Standard - Geology, Carbon Metal Instruments

DZ/T 0101.9-1994 Geological instruments and meters manufacturing time quota non-ferrous metal casting

Professional Standard-Ships, Carbon Metal Instruments

CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing

CU-NC, Carbon Metal Instruments

NC 20-28-1987 Medical Sciences Metallic Medical Instruments General Quality Specifications

ET-QSAE, Carbon Metal Instruments

ES A.C2.002-1973

British Standards Institution (BSI), Carbon Metal Instruments

BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments. Shanks made of metals
BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 13523-3:2014 Coil coated metals. Test methods. Colour difference. Instrumental comparison
BS EN 13523-3:2001 Coil coated metals - Test methods - Colour difference - Instrumental comparison
BS EN 13523-3:2021 Coil coated metals. Test methods. Colour difference and metamerism. Instrumental comparison
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS 6748:1986+A1:2011 Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14556:2015 Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Specific characteristics of diamond instruments
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
BS ISO 11873:2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
BS 1262:2002 Metal packaging. Round lever-lid metal containers for surface coatings. Specification
BS 6499:1998 Metal screw necks, screw caps and inner seals for metal containers - Specification
BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
PD ISO/TR 12148:2009 Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
20/30425659 DC BS EN 13523-3. Coil coated metals. Test methods. Part 3. Colour difference. Instrumental comparison
BS EN ISO 4499-4:2016 Hardmetals. Metallographic determination of microstructure. Characterisation of porosity, carbon defects and eta-phase content
BS EN ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods

WRC - Welding Research Council, Carbon Metal Instruments

BULLETIN 231-1977 FACTORS AFFECTING WELD METAL PROPERTIES IN CARBON AND LOW ALLOY PRESSURE VESSEL STEELS

American Welding Society (AWS), Carbon Metal Instruments

WRC 231:1977 Factors Affecting Weld Metal Properties in Carbon and Low Alloy Pressure Vessel Steels

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Carbon Metal Instruments

GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
GB/T 21838.4-2008 Metallic materials.Instrumented indentation test for hardness and materials Parameters.Part 4:Test method for metallic and non-metallic coatings
GB/T 26836-2011 Non-destructive testing instruments.Specification for metal ceramic X-ray tube
GB/T 10304.11-1988 Determination of heavy metals in cathode carbonate
GB/T 19780-2005 Capacity calibration of spherical metal tank-Total station external measuring method
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method
GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
GB/T 22067.3-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 3: Calibration of standard blocks
GB/T 21838.3-2022 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 3:Calibration of reference blocks
GB/T 21838.3-2008 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:calibration of reference blocks
GB/T 6276.9-1986 Ammonium hydrogen carbonate for industrial use--Determination of heavy metal content--Visible turbidimetric method

Indonesia Standards, Carbon Metal Instruments

SNI 07-6586-2001 General rules for determination of carbon in metals
SNI 07-6588-2001 Determination of carbon content in metals by gravimetric

CZ-CSN, Carbon Metal Instruments

CSN 25 0252-1964 Calibration of machines for creep testing of metals.
CSN 70 4241-1967 Glass apparatus for the determination of carbon in technical iron
CSN 22 0916-1988 Replaceable sintered carbide cutting tips with wiper tip without fixing hole. Dimensions
CSN 42 0542-1987 Cast iron, pig iron, steel, iron-based alloys, metallic chromium and manganese. Methods for determination of the content of carbon
CSN 22 0912-1988 Sintered carbide replaceable cutting tips with rounded tip, without fixing hole. Dimensions

Danish Standards Foundation, Carbon Metal Instruments

DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
DS/EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
DS/ISO 29541:2011 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
DS/EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
DS/EN 131700:1998 Sectional Specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

BR-ABNT, Carbon Metal Instruments

ABNT NBR 16136 Versão Corrigida-2012 Metal caps for closing glass bottles for carbonated and non-carbonated beverages

The American Road & Transportation Builders Association, Carbon Metal Instruments

AASHTO TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
AASHTO M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire

Association of German Mechanical Engineers, Carbon Metal Instruments

VDI 2576-2010 Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal

国家市场监督管理总局、中国国家标准化管理委员会, Carbon Metal Instruments

GB/T 21838.4-2020 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings
GB/T 40216-2021 Data description of intelligent instruments—General requirements of properties database
GB/T 19748-2019 Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method
GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
GB/T 21838.1-2019 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Carbon Metal Instruments

GJB 5372-2005 Metal material dynamic impact test-instrumental method

AASHTO - American Association of State Highway and Transportation Officials, Carbon Metal Instruments

M 280-2003 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
T 337-2009 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
M 280-2009 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire

YU-JUS, Carbon Metal Instruments

JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen
JUS C.A6.037-1991 Metali1c coatings. heasurement of coatlng tbickness. Profilometrlc metbo?
JUS C.A2.052-1987 Metals tests. Determination of the effective depth ofcarburized and hardened cases ofsteels

DE-GPVA, Carbon Metal Instruments

AD 2000-Merkblatt N2-2000 Pressure vessels made of non-metallic materials.Pressure vessels made of electro-graphite and hard burned carbon

Lithuanian Standards Office , Carbon Metal Instruments

LST EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007)
LST EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
LST EN 13523-3-2002 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
LST EN 15104-2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
LST EN 131700-2001 Sectional Specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric

AENOR, Carbon Metal Instruments

UNE-EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
UNE-EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
UNE-EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
UNE 125300-1:1994 LIGHT GAUGE METAL CONTAINERS. ROUND METAL CONTAINERS FOR PAINTS, VARNISHES AND DILUENTS. DIMENSIONAL CHARACTERISTICS.

IT-UNI, Carbon Metal Instruments

RO-ASRO, Carbon Metal Instruments

SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
STAS 8264/1-1983 HARD METALS Metallographie determination of porosity and uneombined carbon
STAS 10907-1977 NON-METALLIFEROUS MINING PRODUCTS WITH CARBONATES CONTENT Sampling
STAS 10123/1-1984 Metal Welding CLASSIFICATION AND SYMBOLI- ZATION OF FLUXES FOR WELDING OF CARBON AND LOW ALLOYED STEELS
STAS 868-1965
STAS 7934-1967
STAS 7186-1965
STAS 10123/2-1984 Metal welding CLASSIFICATION AND SYMBOLI- SATION OF COUPLES WIRE-FLUX FOR WELDING OF CARBON AND LOW ALLOYED STEELS
STAS 9162-1973 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of grain size
STAS 9806-1974 Tests of metals METHOD FOR DETERMINING THE DEPTH OF CARBURIZED LAYER BY MEASURING THE HARDNESS
STAS 7187-1965

Professional Standard - Petroleum, Carbon Metal Instruments

SY/T 5204-1997 General technical condition of metal heat-insulated flask of petroleum downhole tool

International Organization for Standardization (ISO), Carbon Metal Instruments

ISO 1797-1:2011 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
ISO 14556:2015 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method
ISO 3690:2000 Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal
ISO 3690:2018 Welding and allied processes - Determination of hydrogen content in arc weld metal
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 10962:1997 Securities - Classification of Financial Instruments (CFI code)
ISO 11873:2005/cor 1:2008 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method; Technical Corrigendum 1
ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
ISO/CD 29541:1976 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 14556:2023 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO 11873:2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

ES-AENOR, Carbon Metal Instruments

UNE 20-099-1990

PT-IPQ, Carbon Metal Instruments

NP 3304-1988 Small tools Hardmetal heading dies. Terminology
NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison
NP 2176-1986
NP 3302-1988 Small tools Wire, bar or tube drawing dies. As sintered pellets of hard metal (carbide). Dimensions

(U.S.) Ford Automotive Standards, Carbon Metal Instruments

FORD FLTM EU-BA 054-01-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES
FORD FLTM EU-BA 054-1-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES

European Committee for Standardization (CEN), Carbon Metal Instruments

EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
prEN 499-1991 Classification of covered electrodes for manual metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels
EN ISO 1797-1:2011 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals
EN 24505:1993 Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon
prEN 440-1990 Classification of wire electrodes and deposits for gas metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels
CEN EN 13523-3-2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
EN 23907:1993 Hardmetals - Determination of Total Carbon Content - Gravimetric Method (ISO 3907 : 1985)
EN ISO 14556:2023 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines
EN ISO 376:2002 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines ISO 376: 1999; Supersedes EN 10002-3: 1994
EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method

Standard Association of Australia （SAA）, Carbon Metal Instruments

AS/NZS 1553.1:1995 Covered electrodes for welding Part 1: Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels

American National Standards Institute （ANSI), Carbon Metal Instruments

ANSI/EIA 377-1:1972 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application
ASTM A1003/A1003M-23 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members (Standard + Redline PDF Bundle)
ANSI/EIA 376:1970 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/EIA 376-1:1971 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application

AT-ON, Carbon Metal Instruments

ONORM ISO 3365:1988 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole; dimensions
OENORM EN 13523-3-2021 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
ONORM M 7828 Teil.3-1986 Testing offilier metals by weld specimens; test pieces for determination of hardness for surfacing
ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing

KR-KS, Carbon Metal Instruments

KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
KS D ISO 11873-2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS P ISO 6360-4-2020 Dentistry — Number coding system for rotary instruments —Part 4: Specific characteristics of diamond instruments

U.S. Military Regulations and Norms, Carbon Metal Instruments

ARMY MIL-S-46049 C REINST NOTICE 2-1998 STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED AND TEMPERED SPRING QUALITY
ARMY MIL-S-46049 C-1987 STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED AND TEMPERED SPRING QUALITY
ARMY MIL-B-12504 E (1)-1990 BAR, METAL& WIRE (NONELECTRICAL), CARBON AND ALLOY STEEL, COLD DRAWN FOR AP BULLET CORES AND SHOT
ARMY MIL-B-12504 E-1987 BAR, METAL& WIRE (NONELECTRICAL), CARBON AND ALLOY STEEL, COLD DRAWN FOR AP BULLET CORES AND SHOT
ARMY MIL-P-60605 B NOTICE 1-1996 PROJECTILE, 60MM, H.E., M49A2 METAL PARTS ASSEMBLY (CARBON STEEL)
ARMY MIL-P-60605 B (1)-1971 PROJECTILE, 60MM, H.E., M49A2 METAL PARTS ASSEMBLY (CARBON STEEL)
ARMY MIL-P-60605 B-1969 PROJECTILE, 60MM, H.E., M49A2 METAL PARTS ASSEMBLY (CARBON STEEL)
ARMY MIL-A-71179 NOTICE 1-1997 ADAPTER, METAL PALLET FOR STINGER WEAPON SYSTEM
ARMY MIL-A-71179-1993 ADAPTER, METAL PALLET FOR STINGER WEAPON SYSTEM
ARMY MIL-C-71170 VALID NOTICE 2-2013 Container, Ammunition, Lightweight Metal for Stinger Weapon System

ECIA - Electronic Components Industry Association, Carbon Metal Instruments

377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application (ANSI C83.62-71)
377-1-1972 "Parts List Supplement to RS-377@ ""Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Applications"""

Professional Standard - Electron, Carbon Metal Instruments

SJ/T 9503.10-1991 Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors--Quality grading standard

CENELEC - European Committee for Electrotechnical Standardization, Carbon Metal Instruments

EN 130500:1998 Sectional Specification: Fixed Metallized Polycarbonate Film Dielectric Capacitors for Direct Current
EN 131700:1997 Sectional Specification: Fixed Capacitors for Direct Current with Electrodes of Thin Metal Foils and a Polycarbonate Film Dielectric
EN 130502:1998 Blank Detail Specification: Fixed Metallized Polycarbonate Film Dielectric Capacitors for Direct Current Assessment Level EZ

American Society of Mechanical Engineers (ASME), Carbon Metal Instruments

ASME SEC II A SA-562/SA-562M-2001 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings ASTM A562/A562M-90

Professional Standard - Electricity, Carbon Metal Instruments

DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations

U.S. Air Force, Carbon Metal Instruments

AIR FORCE A-A-59131 A-2004 DETECTOR, METAL FLAW, ELECTRONIC

Canadian Standards Association (CSA), Carbon Metal Instruments

CSA ISO 14341-06-CAN/CSA:2006 Welding consumables Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification First Edition

CEN - European Committee for Standardization, Carbon Metal Instruments

PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods
EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

ISA - International Society of Automation, Carbon Metal Instruments

ISA 92.02.01 PART I-1998 Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

ZA-SANS, Carbon Metal Instruments

SANS 12902:2007 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods

Natural Gas Processor's Association (NGPA), Carbon Metal Instruments

GPA RR-95-1986 Application of a High Pressure, Multiproperty Apparatus for the Measurement of Thermodynamic and Transport Properties to Measure the Phase and Volumetric Properties of a Supercritical Extractive System: The Carbon Dioxide-N- Hexadecane System

Professional Standard - Light Industry, Carbon Metal Instruments

QB/T 2268-1996 General technical requirements for finishing exterior parts of chronograph instruments Paint coatings for metal exterior parts of clocks

ES-UNE, Carbon Metal Instruments

UNE-EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN 131700:1997 SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS A POLYCARBONATE FILM DIELECTRIC. (Endorsed by AENOR in June of 1998.)
UNE-EN 13523-3:2022 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison

Professional Standard - Ferrous Metallurgy, Carbon Metal Instruments

YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method

AR-IRAM, Carbon Metal Instruments

IRAM 5112-1959

FI-SFS, Carbon Metal Instruments

SFS 4118-1978

SG-SPRING SG, Carbon Metal Instruments

SS 48 AMD 1-1971 SPECIFICATION FOR COVERED ELECTRODES FOR THE MANUAL METAL-ARC WELDING OF MILD STEEL AND MEDIUM-TENSILE STEEL

AWS - American Welding Society, Carbon Metal Instruments

A4.2-1974 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL
A4.2-1986 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL

Professional Standard - Automobile, Carbon Metal Instruments

QC/T 1003-2015 Determination of precious metal in metal support catalytic converter for motorcycles

Military Standard of the People's Republic of China-General Armament Department, Carbon Metal Instruments

GJB 972/2-2011 Detail specification for established reliability fixed metalized polycarbonate dielectric d.c.capacitors,type CLSK201A

CO-ICONTEC, Carbon Metal Instruments

ICONTEC 5-1992

Society of Automotive Engineers (SAE), Carbon Metal Instruments

SAE AMS3380D-1991 Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced