ZH
RU
ES

mass volume volume fraction

mass volume volume fraction, Total:499 items.

In the international standard classification, mass volume volume fraction involves: Soil quality. Pedology, Measurement of fluid flow, Continuous handling equipment, Pulps, Measurement of volume, mass, density, viscosity, Conducting materials, Buildings, Petroleum products in general, Wood-based panels, Water quality, Equipment for petroleum and natural gas industries, Electricity. Magnetism. Electrical and magnetic measurements, Fruits. Vegetables, Fertilizers, Quality, Products of the textile industry, Plastics, Vocabularies, Insulating fluids, Testing of metals, Products of non-ferrous metals, Construction materials, Analytical chemistry, Products of the chemical industry, Fuels, Vacuum technology, Rubber, Bottles. Pots. Jars, Barrels. Drums. Canisters, Non-textile floor coverings, Metrology and measurement in general, Electrical wires and cables, Installations in buildings, Textile auxiliary materials, Air quality, Organic chemicals, Wastes, Non-ferrous metals, Welding, brazing and soldering, Cellular materials, Paints and varnishes, Particle size analysis. Sieving, Insulating materials, Beverages, Edible oils and fats. Oilseeds, Ferrous metals, Geology. Meteorology. Hydrology, Food products in general, Prepackaged and prepared foods, Electrical equipment for working in special conditions, Safety of machinery, Ergonomics, Reinforced plastics, Agricultural machines, implements and equipment, Linear and angular measurements, Road engineering, Metalliferous minerals, Electrical and electronic testing, Printed circuits and boards, Graphic technology, Fluid power systems, Alarm and warning systems, Non-metalliferous minerals.

Association Francaise de Normalisation, mass volume volume fraction

• NF EN ISO 1183-2:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 2 : méthode de la colonne à gradient de masse volumique
• NF EN ISO 11508:2017 Qualité du sol - Détermination de la masse volumique des particules
• NF X31-503:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Méthode au sable.
• NF B56-013:1980 Panneaux fibragglo - Détermination de la masse volumique et de la masse surfacique
• NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
• XP U45-004*XP CEN/TS 17725:2022 Plant biostimulants - Determination of the quantity (indicated by mass or volume)
• XP CEN/TS 17725:2022 Biostimulants des végétaux - Détermination de la quantité (exprimée en masse ou en volume)
• NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
• NF EN ISO 8655-6:2022 Appareils volumétriques à piston - Partie 6 : mode opératoire de mesure gravimétrique de référence pour la détermination de volumes
• NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
• NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
• NF P85-502:2005 Building construction - Sealants - Determination of change in mass and volume.
• NF P62-113*NF EN ISO 23996:2012 Resilient floor coverings - Determination of density
• NF P62-113:1994 Resilient floor coverings. Determination of density.
• NF EN 13974:2003 Conteneurs en plastique rigide - Spécifications des tolérances sur les dimensions, le poids et le volume
• NF ISO 13168:2015 Qualité de l'eau - Détermination simultanée des activités volumiques du tritium et du carbone 14 - Méthode par comptage des scintillations en milieu liquide
• NF H35-204*NF EN 13974:2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume.
• NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
• NF EN ISO 1133-1:2022 Plastiques - Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) - Partie 1 : méthode normale
• NF E17-304-1:2010 Gas meters - Conversion devices - Part 1 : volume conversion.
• NF E17-304-1/IN2:2010 Gas meters - Conversion devices - Part 1 : volume conversion.
• NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
• NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
• NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
• NF D90-206*NF EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume)
• NF X31-433*NF ISO 16586:2003 Sol quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
• NF A06-751:1975 Chemical analysis of copper alloys. Volumetric determination of total chromium.
• NF EN ISO 8655-2:2022 Appareils volumétriques à piston - Partie 2 : pipettes
• NF ISO 16586:2003 Qualité du sol - Détermination de la teneur en eau volumique du sol à partir de la masse volumique apparente sèche connue - Méthode gravimétrique
• NF T60-214*NF EN ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
• NF EN ISO 10563:2017 Bâtiments et ouvrages de génie civil - Mastics - Détermination des variations de masse et de volume
• NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
• NF X33-027-1*NF EN 14702-1:2006 Characterization of sludges - Settling properties - Part 1 : determination of settleability (Determination of the proportion of sludge volume and sludge volume index).
• NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
• NF X31-505:1992 Soil quality - Physical methods - Method for determining the bulk volume and the water content of lumps of earth
• NF P85-502*NF EN ISO 10563:2017 Buildings and civil engineering works - Sealants - Determination of change in mass and volume
• NF EN ISO 4590:2016 Plastiques alvéolaires rigides - Détermination du pourcentage volumique de cellules ouvertes et de cellules fermées
• NF ISO 23783-2:2022 Systèmes automatisés de manipulation de liquides - Partie 2 : procédures de mesure pour la détermination des performances volumétriques
• NF X43-200*NF EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
• NF T60-214:2014 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
• NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
• NF A05-165:1987 Steel products - Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
• NF X10-309:1986 Liquid flow measurement in open channels. Velocity area methods. Collecting and processing of data for determination of errors measurement.
• NF T60-214:1995 Animal and vegetable fats and oils. Determination of conventional mass per volume ("litre weight in air").
• NF EN ISO 8655-7:2022 Appareils volumétriques à piston - Partie 7 : Modes opératoires de mesure alternatifs pour la détermination de volumes
• NF T51-038-1*NF EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 : standard method.
• NF EN 772-9:1999 Méthodes d'essai des éléments de maçonnerie - Partie 9 : détermination du volume et du pourcentage de vides et du volume net absolu des éléments de maçonnerie en silico-calcaire par remplissage de sable
• NF T75-367:2012 Oil of eucalyptus, Australian type, containing a volume fraction of 80% to 85% of 1,8-cineole.
• NF EN IEC 62604-1:2022 Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de volume (OAV) sous assurance de la qualité - Partie 1 : Spécification générique
• NF M08-025*NF ISO 15169:2004 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems.
• NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
• NF P98-897-4*NF EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4 : determination of the change in mass and volume after immersion in test fuels and liquid chemicals
• NF EN 14187-4:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 4 : détermination de la variation de masse et de volume après immersion dans des carburants d'essai et des produits chimiques liquides
• NF B35-512:1983 Laboratory glassware. Glass hydrometers. Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids).
• NF T60-274*NF ISO 18301:2015 Animal and vegetable fats and oils - Determination of the conventional mass per volume (litre weight in air) - Oscillating U-tube method

Korean Agency for Technology and Standards (KATS), mass volume volume fraction

• KS I ISO 16586:2009 Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
• KS M ISO 7278-2-2003(2018)
• KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
• KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
• KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
• KS I ISO 11461:2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
• KS M ISO 7278-4-2003(2018)
• KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
• KS B ISO 1607-1:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
• KS B ISO 1607-1:2013 Positive-displacement vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
• KS B ISO TR 9823-2003(2013) Liquid flow measurement in open channels－Velocity－area method using a restricted number of verticals
• KS I ISO 11461-2005(2015) Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
• KS M ISO 1133-1:2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
• KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
• KS M ISO 1133-1-2012(2022) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
• KS C IEC 62631-3-1:2017 Dielectric and resistive properties of solid insulating materials — Part 3—1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method
• KS D ISO 9042-2002(2012) Steels－Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
• KS H ISO 6883-2013(2018) Animal and vegetable fats and oils ― Determination of conventional mass per volume (litre weight in air)
• KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
• KS M ISO 7278-1-2003(2018)
• KS D ISO 9042:2002 Steels-Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
• KS H ISO 3065-2013(2018) Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
• KS D ISO 9042:2013 Steels－Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
• KS M ISO 15169-2005(2020) Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
• KS B ISO 1608-1-2004(2009) Vapour vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
• KS C IEC 61779-5-2003(2018)
• KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
• KS M ISO 15169:2005 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
• KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
• KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
• KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers

International Organization for Standardization (ISO), mass volume volume fraction

• ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
• ISO 7278-4:1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers
• ISO 1607-1:1993 Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
• ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
• ISO 2714:1980 Liquid hydrocarbons; Volumetric measurement by displacement meter systems other than dispensing pumps
• ISO/TR 7871:1997 Culmulative sum charts - Guidance on quality control and data analysis using CUSUM techniques
• ISO 9042:1988 Steels; manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
• ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
• ISO 10563:2017 Buildings and civil engineering works - Sealants - Determination of change in mass and volume
• ISO 10563:2023 Building and civil engineering sealants — Determination of change in mass and volume
• ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• ISO/DIS 9042:2023 Steels — Point counting method for statistically estimating the volume fraction of a constituent with a point grid
• ISO 1133-1:2022 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
• ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
• ISO/FDIS 10563 Building and civil engineering sealants — Determination of change in mass and volume
• ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
• ISO 16586:2003/Cor 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method; Technical Corrigendum 1
• ISO 1088:1973 Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement
• ISO 6883:1987 Animal and vegetable fats and oils; Determination of mass per unit volume ("litre weight") in air
• ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
• ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
• ISO 6883:1995 Animal and vegetable fats and oils - Determination of conventional mass per volume ("litre weight in air")
• ISO 3065:2011 Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
• ISO/CD 9042 Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
• ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
• ISO 6883:1995/Cor 1:1996 Animal and vegetable fats and oils - Determination of conventional mass per volume ("litre weight in air"); Technical corrigendum 1
• ISO 555-2:1987 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method
• ISO 555-2:1974 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 2: Integration (sudden injection) method
• ISO 1608-1:1993 Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
• ISO 18301:2014 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) - Oscillating U-tube method
• ISO 23783-2:2022 Automated liquid handling systems — Part 2: Measurement procedures for the determination of volumetric performance

German Institute for Standardization, mass volume volume fraction

• DIN ISO 16586:2012 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
• DIN EN 17817:2022 Fertilizing products - Determination of the quantity (indicated by mass or volume); German and English version prEN 17817:2022
• DIN EN 17817:2022-02 Fertilizing products - Determination of the quantity (indicated by mass or volume); German and English version prEN 17817:2022 / Note: Date of issue 2022-01-21
• DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
• DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
• DIN EN ISO 10693:2014 Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995); German version EN ISO 10693:2014
• DIN EN 17725:2023-06 Plant biostimulants - Determination of the quantity (indicated by mass or volume); German and English version prEN 17725:2023 / Note: Date of issue 2023-05-19*Intended as replacement for DIN CEN/TS 17725 (2022-07).
• DIN CEN/TS 17725:2022-07 Plant biostimulants - Determination of the quantity (indicated by mass or volume); German version CEN/TS 17725:2022
• DIN EN ISO 11461:2014-07 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001); German version EN ISO 11461:2014
• DIN ISO 16586:2012-05 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
• DIN 1871:1999 Gaseous fuels and other gases - Density and other volumetric quantities
• DIN EN ISO 8655-7:2020 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO/DIS 8655-7:2020); German and English version prEN ISO 8655-7:2020
• DIN EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); English version of DIN EN ISO 10563
• DIN EN 13974:2003-01 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume; German version EN 13974:2002
• DIN EN ISO 8655-6:2020 Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO/DIS 8655-6:2020); German and English version prEN ISO 8655-6:2020
• DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
• DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
• DIN EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume)
• DIN EN 12130:2018-10 Feather and down - Test methods - Determination of the fill power (massic volume); German version EN 12130:2018
• DIN EN 15761:2022 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021
• DIN EN ISO 8655-8:2020 Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO/DIS 8655-8:2020); German and English version prEN ISO 8655-8:2020
• DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
• DIN EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) English version of DIN EN 14702-1:2006-06
• DIN EN 14702-1:2006-06 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006
• DIN EN ISO 10563:2017-09 Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017); German version EN ISO 10563:2017
• DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
• DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
• DIN EN 17725:2023 Plant biostimulants - Determination of the quantity (indicated by mass or volume); German and English version prEN 17725:2023
• DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
• DIN EN ISO 6883:2017-05 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017); German version EN ISO 6883:2017
• DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
• DIN EN ISO 2286-3:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016
• DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
• DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
• DIN EN ISO 8655-7:2022-11 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022); German version EN ISO 8655-7:2022
• DIN 58933-1:1995-01 Haematology - Procedure for determining the volume fraction of erythrocytes (packed cell volume) in blood - Part 1: Reference method based on centrifugation
• DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
• DIN 16459:2023-08 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
• DIN 19683-14:2007 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
• DIN EN ISO 23783-2:2023-07 Automated liquid handling systems - Part 2: Measurement procedures for the determination of volumetric performance (ISO 23783-2:2022); German and English version prEN ISO 23783-2:2023 / Note: Date of issue 2023-06-02
• DIN EN ISO 8655-3:2020 Piston-operated volumetric apparatus - Part 3: Burettes (ISO/DIS 8655-3:2020); German and English version prEN ISO 8655-3:2020
• DIN 16459:2021 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
• DIN ISO 697:1984-01 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
• DIN EN 14187-4:2003 Cold applied joint sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel; German version EN 14187-4:2003
• DIN EN ISO 8655-8:2022-11 Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO 8655-8:2022); German version EN ISO 8655-8:2022
• DIN ISO 697:1984 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
• DIN EN 14187-4:2017-07 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals; German version EN 14187-4:2017
• DIN EN ISO 8655-6:2022-11 Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO 8655-6:2022, Corrected version 2022-06); German version EN ISO 8655-6:2022

Danish Standards Foundation, mass volume volume fraction

• DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
• DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
• DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
• DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
• DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
• DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
• DS/ISO 11461:2003 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
• DS/INSTA 178:1990 Building sealants. Volume shrinkage and weight loss after ageing
• DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
• DS/EN ISO 10563:2007 Building construction - Sealants - Determination of change in mass and volume
• DS/EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
• DS/EN ISO 8655-5/AC:2009 Piston-operated volumetric apparatus - Part 5: Dispensers
• DS/EN ISO 8655-5:2002 Piston-operated volumetric apparatus - Part 5: Dispensers
• DS/EN 12130:1999 Feather and down - Test methods - Determination of the filling power (massic volume)
• DS/EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
• DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
• DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics
• DS/EN ISO 8655-2/AC:2009 Piston-operated volumetric apparatus - Part 2: Piston pipettes
• DS/EN ISO 8655-2:2002 Piston-operated volumetric apparatus - Part 2: Piston pipettes
• DS/EN ISO 8655-6/AC:2009 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
• DS/EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
• DS/EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
• DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

Association of German Mechanical Engineers, mass volume volume fraction

• VDI 4436-2007 Measurement of mass and volume flows of bulk solids

American National Standards Institute （ANSI), mass volume volume fraction

• ANSI/TAPPI T268 om-2013 Weight-volume measurement of pulpwood

ZA-SANS, mass volume volume fraction

• SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
• SANS 1133:2008 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

International Electrotechnical Commission (IEC), mass volume volume fraction

• IEC 61788-5:2000 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement; Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
• IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
• IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires
• IEC 62899-302-2:2018 Printed electronics - Part 302-2: Equipment - Inkjet - Imaging-based measurement of droplet volume

IT-UNI, mass volume volume fraction

• UNI 7548-P2-1976
• UNI 7549-P5-1976
• UNI 7549-P4-1976
• UNI 3518-1954
• UNI 7825-1978
• UNI ISO 1608-1:2020 Vapour vacuum pumps -- Measurement of performance characteristics - Part 1: Measurement of volume rate of flow (pumping speed)
• UNI 3895-1957 Procedures for the chemical analysis of minerals. Determination of the silica content of chrome minerals. Sodium peroxide disaggregation method.
• UNI 3893-1957 Procedures for the chemical analysis of minerals. Determination of the chrome content of chrome minerals. Volumetric method by means of disaggregation with sodium peroxide.
• UNI 3894-1957 Procedures for the chemical analysis of minerals. Determination of the total iron content of chrome minerals. Volumetric method by means of disaggregation with sodium peroxide.

American Society for Testing and Materials (ASTM), mass volume volume fraction

• ASTM D2421-02(2007) Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
• ASTM D2421-95 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
• ASTM D2421-01 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
• ASTM D2421-02 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
• ASTM D2421-21 Standard Practice for Interconversion of Analysis of C
• ASTM D2421-21e1 Standard Practice for Interconversion of Analysis of C
• ASTM D2421-13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
• ASTM D2421-19 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
• ASTM D2421-18 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
• ASTM E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
• ASTM E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
• ASTM E202-09 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
• ASTM E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
• ASTM E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
• ASTM D7708-14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
• ASTM E562-11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM UOP578-02 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
• ASTM UOP578-11 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
• ASTM E562-01 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM E562-05e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM E562-19 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM E562-99 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM E562-19e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM C1005-10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
• ASTM C1005-20 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
• ASTM C1005-00 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
• ASTM C1005-17 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
• ASTM C1005-19 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
• ASTM C1005-18 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
• ASTM C1005-05 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

RU-GOST R, mass volume volume fraction

• GOST 8.142-2013 State system for insuring the uniformity of measurements. The national traceability chain for instruments measuring the mass and volumetric (the mass and the volume) flow of liquid
• GOST 8.374-2013 State system for insuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric and mass flow (volume and mass) of water
• GOST R 53764-2009 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
• GOST 8756.10-2015 Fruit and vegetable products. Methods for determination of volume and mass fraction of the pulp
• GOST R 8.909-2016 State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements
• GOST 4.180-1985 System of product-quality indices. Mass measures. Nomenclature of indices
• GOST 15528-1986 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions
• GOST 8756.1-2017 Fruit, vegetable and mushroom products. Methods for determination of organoleptic characteristics, components fraction of total mass and net mass or volume
• GOST R 8.618-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas
• GOST R ISO 6144-2008 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
• GOST 8.510-2002 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass of liquid
• GOST 8.510-1984 State system for ensuring the uniformity of measurements. State verification schedule for means measuring (meters) volume of liquid
• GOST 8.595-2010 State system for ensuring the uniformity of measurements. Density and volume of petroleum. The tables of factors for recalculation of density and mass
• GOST R 53335-2009 Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)
• GOST 33833-2016 Spirits. Gas-chromatographic method for determination of volume fraction of methanol
• GOST R ISO 9042-2011 Steels. Manual point counting method for statistically estimating the volume fraction of a constituent with point grid
• GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
• GOST R 51822-2001 Wines and wine materials. Gas-chromatographic method for determination of volume fraction of ethanol and mass concentration of acetic and propionic acids
• GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass
• GOST ISO 6883-2016 Vegetable oils and animal fats. Determination of conventional mass per volume (litre weight in air)
• GOST R 57858-2017 Polymer composites. Method for determination of fiber volume fraction and fiber distribution in polymer matrix
• GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
• GOST 21524-1976 Round timber. Means for linear and volumetric measurements. Types and basic parameters. Technical requirements
• GOST R 52140-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 5. Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas

AT-ON, mass volume volume fraction

• ONORM M 6273-2000 Water analysis-Analysis of activated sludge-Determination of the settled share of sludge volume,the dry residue and the sludge volume index
• ONR CEN/TS 17725-2021 Plant biostimulants - Determination of the quantity (indicated by mass or volume) (FprCEN/TS 17725:2021)
• ONORM M 6271-1985 Water analysis; determination of the settleable matter by volumein water and waste water
• ONORM ISO 697:1986 Surface active agents; washing powders; determination ofapparent density; method by measuring the mass ofa given volume

CZ-CSN, mass volume volume fraction

• CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight
• CSN 66 8050-1975 Determination of the volume mass of a blasting cartridge and of the bulk mass of loose-powder explosives
• CSN 72 2603-1978 Testing of brick products. Determination of mass, volume mass and absorptivity
• CSN 73 1315-1989 Determination of volume mass, den- sity, compactness and porosity of concrete

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, mass volume volume fraction

• GB/T 17286.2-2016 Liquid hydrocarbons.Dynamic measurement.Proving systems for volumetric meters.Part 2: Pipe provers
• GB/T 17286.2-1998 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 2: Pipe provers
• GB/T 17286.4-2006 Liquid hydrocarbons.Dynamic measurement.Proving systems for volumetric meters.Part 4: Guide for operators of pipe provers
• GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
• GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers
• GB/T 19956.1-2005 Positive-displacement vacuum pumps.Measurement of performance characteristics.Part 1:Measurement of volume rate of flow (pumping speed)
• GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• GB/Z 4887-2006 Cumulative Sum charts. Guidance on quality control and data analysis using CUSUM techniques
• GB/T 41736-2022 High volume fraction SiC particulate aluminum matrix composites
• GB/T 13477.19-2002 Test method for building sealants Part 19: Determination of change in mass and volume
• GB/T 10799-2008 Rigid cellular plastics.Determination of the volume percentage of open cells and of closed cells
• GB/T 32496-2016 Test method for volume fraction of reinforcement in metal matrix composites.Image analysis method
• GB 10799-1989 Cellular plastics--Determination of volume percentage of open and closed cells of rigid materials
• GB/T 10799-1989 Cellular plastics--Determination of volume percentage of open and closed cells of rigid materials
• GB/T 41737-2022 Aluminum matrix composites-Test method for volume fraction of SiC-Dissolution method
• GB/T 9109.3-2014 Dynamic measurement of petroleum and liquid petroleum products.Part 3:Technical requirements of installation for pipe prover
• GB/T 9272-2007 Paints and varnishes.Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
• GB/T 17286.1-1998 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 1: General principles
• GB/T 17286.1-2016 Liquid hydrocarbons dynamic measurement proving systems for volumetric meters.Part 1:General principles
• GB/T 19955.1-2005 Vapour vacuum pumps.Measurement of performance characteristics.Part 1:Measurement of volume rate of flow (pumping speed)
• GB/T 42248-2022 Soil and stream sediment—Determination of iodine and bromine content—Decomposition by sintering inductively coupled plasma mass spectrometry

European Committee for Electrotechnical Standardization（CENELEC）, mass volume volume fraction

• EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
• EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
• EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

Lithuanian Standards Office , mass volume volume fraction

• LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
• LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
• LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
• LST EN 12130-2002 Feather and down - Test methods - Determination of the filling power (massic volume)
• LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
• LST EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
• LST EN ISO 10563:2006 Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005)
• LST EN 14702-1-2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
• LST EN ISO 8655-5:2002 Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002)
• LST EN ISO 4590:2004 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
• LST EN ISO 8655-5:2002/AC:2009 Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002/Cor 1:2008)
• LST EN ISO 8655-3:2002 Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002)
• LST ISO 6883:2007 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2007, identical)
• LST EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
• LST EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002)

VN-TCVN, mass volume volume fraction

• TCVN 6655-2000 Soil quality.Determination of carbonate content.Volumetric method
• TCVN 4996-1-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 1: Reference method
• TCVN 4996-3-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 3: Routine method
• TCVN 6117-2010 Animal and vegetable fats and oils.Determination of conventional mass per volume (litre weight in air)

European Committee for Standardization (CEN), mass volume volume fraction

• FprCEN/TS 17725-2021 Plant biostimulants - Determination of the quantity (indicated by mass or volume)
• prEN 672-1992 Cork floorcoverings; determination of mass per unit volume
• EN ISO 10693:2014 Soil quality - Determination of carbonate content - Volumetric method
• EN 16695:2015 Water quality - Guidance on the estimation of phytoplankton biovolume
• prEN 436-1990 Resilient floorcoverings; determination of mass per unit volume
• EN ISO 10563:1997 Building Construction - Sealants for Joints - Determination of Change in Mass and Volume ISO 10563: 1991
• EN ISO 10563:2017 Buildings and civil engineering works - Sealants - Determination of change in mass and volume
• EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
• EN ISO 4590:1995 Cellular Plastics - Determination of Volume Percentage of Open and Close Cells of Rigid Materials (ISO 4590:1981)
• EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
• EN 14702-1:2006 Characterization of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
• EN ISO 2286-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate ISO 2286-2:1998
• EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells ISO 4590: 2002
• EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
• EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
• EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
• EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
• EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
• EN ISO 10563:2023 Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)
• prEN ISO 10563 Building and civil engineering sealants - Determination of change in mass and volume (ISO/FDIS 10563:2023)
• prEN ISO 23783-2 Automated liquid handling systems - Part 2: Measurement procedures for the determination of volumetric performance (ISO 23783-2:2022)
• EN ISO 23783-2:2023 Automated liquid handling systems - Part 2: Measurement procedures for the determination of volumetric performance (ISO 23783-2:2022)
• EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals

British Standards Institution (BSI), mass volume volume fraction

• 22/30440785 DC BS EN 17817. Fertilizing products. Determination of the quantity (indicated by mass or volume)
• PD CEN/TS 17725:2022 Plant biostimulants. Determination of the quantity (indicated by mass or volume)
• BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
• BS EN ISO 11461:2014 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
• 23/30463075 DC BS EN 17725. Plant biostimulants. Determination of the quantity (indicated by mass or volume)
• BS EN ISO 8655-5:2002 Piston-operated volumetric apparatus - Part 5:Dispensers
• BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
• BS EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
• BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• BS EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
• BS ISO 2714:2017 Liquid hydrocarbons. Volumetric measurement by displacement meter. Volumetric measurement by displacement meter systems other than dispensing pumps
• BS EN 14702-1:2006 Characterization of Sludges. Settling Properties. Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volume and Sludge Volume Index)
• BS EN 14702-1:2007 Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
• BS EN ISO 10563:2017 Buildings and civil engineering works. Sealants. Determination of change in mass and volume
• BS EN ISO 10563:2023 Building and civil engineering sealants. Determination of change in mass and volume
• BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
• BS ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
• BS 3680 Pt.5:1992 Measurement of liquid flow in open channels. Slope area method of estimation
• BS 1428-D4:1963 Microchemical apparatus. Volumetric analysis. Specification for capillary pipettes
• BS EN ISO 13138:2012 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
• BS ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
• BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
• BS EN 12130:2018 Tracked Changes. Feather and down. Test methods. Determination of the fill power (massic volume)
• BS ISO 3065:2012 Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
• BS 7590:1992 Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid
• BS EN ISO 4590:2016 Tracked Changes. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
• BS EN ISO 1133-1:2022 Tracked Changes. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
• 21/30389975 DC BS ISO 23783-2. Automated liquid handling systems. Part 2. Measurement procedures for the determination of volumetric performance
• BS EN 14187-4:2003 Cold applied joint sealants - Test method for the determination of the change in mass and volume after immersion in test fuel
• BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
• BS ISO 5596:1999 Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities
• BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
• BS ISO 18301:2014 Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air). Oscillating U-tube method
• BS 2782-6 Method 621C:1983 Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials

ES-UNE, mass volume volume fraction

• UNE-CEN/TS 17725:2022 Plant biostimulants - Determination of the quantity (indicated by mass or volume) (Endorsed by Asociación Española de Normalización in May of 2022.)
• UNE-EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) (Endorsed by AENOR in May of 2014.)
• UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
• UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
• UNE-EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume) (Endorsed by Asociación Española de Normalización in October of 2018.)
• UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)
• UNE-EN ISO 10563:2018 Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017)
• UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
• UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
• UNE-EN ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017)
• UNE-EN ISO 8655-7:2022 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022, Corrected version 2023-01)
• UNE-EN ISO 7278-1:1995 LIQUID HYDROCARBONS. DYNAMIC MEASUREMENT. PROVING SYSTEMS FOR VOLUMETRIC METERS. PART 1: GENERAL PRINCIPLES. (ISO 7278-1:1987) (Endorsed by AENOR in February of 1996.)
• UNE-EN ISO 8655-6:2022 Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO 8655-6:2022, Corrected version 2022-06)

YU-JUS, mass volume volume fraction

• JUS C.A6.022-1982 Volumetric method for determining tin coating mass (lodine method)
• JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content
• JUS E.K8.022-1991 Animal and vegetable fats and oils. Determination of mass per unit volume ("litre weight") in air
• JUS H.G8.352-1989 Reaaents. Acetone. De termina ti. on of permaneanate-reducing substances content. Volumetric inethod
• JUS H.G8.038-1981 Reagents. Sulphuric acid. Determination ofpermanganate reducing substances content. Volumetric met- hod
• JUS H.G8.480-1991 Reagents. Orthophosphoric aci?. Determination of permanganate reducing substances content. Volumetric method
• JUS H.G8.337-1987 Reagents. Ammonium acetate. Determination of permanganate reducing substances content Volumetric method
• JUS H.B8.638-1981 Sulphuric acid for industrial use. Determination of pe mangan a te reducing substances content Vol u me trk method
• JUS H.G8.213-1985 eagents. Meihanol. Determination ofpermanganate reducing substances content. Volumetric method
• JUS H.G8.136-1984 Reagents. Ammonia solution. Determination of permanganate reducing substances content. Volumetric ethod
• JUS H.G8.381-1989 Reagents. Sodium acetate trihydrate. Determination of permanganate reducing substances content. Volumetric method

KR-KS, mass volume volume fraction

• KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
• KS I ISO 11461-2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
• KS C IEC 62631-3-1-2017 Dielectric and resistive properties of solid insulating materials — Part 3—1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method
• KS C IEC 61779-5-2003(2023)
• KS B ISO 1088-2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
• KS C IEC 61779-3-2003(2023)
• KS M ISO 697-2007(2023) Surface active agents－Washing powders－Determination of apparent density－Method by measuring the mass of a given volume
• KS M ISO 7278-1-2003(2023)
• KS M ISO 7278-2-2003(2023)
• KS C IEC 61779-4-2003(2023)
• KS M ISO 7278-3-2003(2023)
• KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
• KS C IEC 61779-2-2003(2023)
• KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials

CENELEC - European Committee for Electrotechnical Standardization, mass volume volume fraction

• EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
• EN 61779-5:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas

API - American Petroleum Institute, mass volume volume fraction

• API PUBL 4540-1992 Area and Volume Source Air Quality Model Performance Evaluation Phase II Final Report
• API MPMS 11.4.1 ERTA-2011 Manual of Petroleum Measurement Standards Chapter 11—Physical Properties Data Section 4—Properties of Reference Materials Part 1—Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (First Edition)
• API MPMS 11.4.1-2003 Measurement StandardsChapter 11Physical PropertiesData Section 4Properties of Reference Materials Part 1Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (First Edition)
• API MPMS 11.1 VOL VI-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
• API MPMS 11.1 VOL III-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
• API MPMS 12.2.5 ERTA-2009 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
• API MPMS 12.2.5-2001 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
• API MPMS 12.2.4 ERTA-2009 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
• API MPMS 12.2.4-1997 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
• API MPMS 11.4.1-2018 Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 4-Properties of Reference Materials Part 1-Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (SECOND EDITION)
• API MPMS 11.1 VOL IX-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degre
• API MPMS 14.4-1991 Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluids Measurement Section 4—Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes (First Edition)
• API MPMS 14.4-2017 Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 4-Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes (SECOND EDITION)
• API MPMS 11.3.3-2011 Manual of Petroleum Measurement Standards Chapter 11.3.3 Miscellaneous Hydrocarbon Product Properties - Ethanol Density and Volume Correction Factors (First Edition)
• API STD 675 DATA SHEET- Positive Displacement Pumps - Controlled Volume – Mechanical Equipment Data Sheet (Second Edition * Includes Access to Additional Content)

Japanese Industrial Standards Committee (JISC), mass volume volume fraction

• JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
• JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
• JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
• JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)
• JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method
• JIS G 1211-2:2011 Iron and steel -- Determination of carbon content -- Part 2: Gas volumetric method after combustion
• JIS B 8397:2002 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities

ES-AENOR, mass volume volume fraction

• UNE 59-018-1986
• UNE 83-124-1990
• UNE 35-028 Pt.1-1986

IX-SA, mass volume volume fraction

• AS 1012 Pt.5:1983
• AS 1012.12:1986

Group Standards of the People's Republic of China, mass volume volume fraction

• T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
• T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）

GOSTR, mass volume volume fraction

• GOST R 8.995-2020 State system for ensuring the uniformity of measurements. Volume flow rate and quantity of natural gas. Measurements procedure (method) using volumetric diaphragm and fluidics gas meters

BE-NBN, mass volume volume fraction

• NBN-ISO 10563:1992 Building construction - Sealants for joints - Determination of change in mass and volume
• NBN A 43-402-1983
• NBN-EN 20090-3-1993 Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 3: Aerosol cans (ISO 90-3: 1986)
• NBN-EN 20090-2-1993 Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 2: General use containers (ISO 90-2: 1986)

SE-SIS, mass volume volume fraction

• SIS SS-ISO 1607-1:1991 Positive-displacement vacuum pumps — Measurement of performance characteris- tics — Part 1: Measurement of volume r?te of flow (pumping speed)
• SIS SS 18 41 23-1987 Paints and varnishes - Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating

RO-ASRO, mass volume volume fraction

• STAS 6050-1980 Chemical analysis GRAVIMETRIC AND VOLUMETRIC ANALYSIS Glossary of terms
• STAS SR 13397-1997 Air quality Volumetric activity determination of polonium 218, lead 214, bismut 214 and lead 212

PL-PKN, mass volume volume fraction

• PN BN 6110-23-1967
• PN H04836 ArkusZ02-1974 Chemical analysis of foundry alu- minimum base alloys Volumetric determination of vana- dium
• PN H04836 ArkusZ03-1974 Chemical analysis of foundry alu- minimum base alloys Volumetric determination of vana- dium
• PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• PN C04829-1992 Agents for laundering and washing. Washing powders. Determination of apparent density. Method by measuring the mass of a given volume

AENOR, mass volume volume fraction

• UNE-EN 12130:1999 FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME)
• UNE-ISO 16586:2006 Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method (ISO 16586:2003)
• UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
• UNE-EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
• UNE 35028-1:1986 FERROALLOYS. DETRMINATION OF SULPHUR CONTENT. PART 1: VOLUMETRIC METHOD
• UNE-EN 14702-1:2007 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
• UNE-EN ISO 8655-5:2003 Piston-operated volumetric apparatus - Part 5: Dispensers. (ISO 8655-5:2002)
• UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
• UNE-EN ISO 8655-2:2003 Piston-operated volumetric apparatus - Part 2: Piston pipetter. (ISO 8655-2:2002)
• UNE 55516:1989 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF APPARENT DENSITY. METHOD BY MEASURING THE MASS OF A GIVEN VOLUME.
• UNE-EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
• UNE-EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
• UNE-EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error. (ISO 8655-6:2002)

Standard Association of Australia （SAA）, mass volume volume fraction

• AS 2292.1:1979 Methods for the analysis of solders - Determination of tin (volumetric method)
• AS 1012.12.2:1998 Methods of testing concrete - Determination of mass per unit volume of hardened concrete - Water displacement method
• AS 1012.12.1:1998 Methods of testing concrete - Determination of mass per unit volume of hardened concrete - Rapid measuring method
• AS 1012.12.1:1998(R2014)
• AS 1012.12.2:1998(R2014)
• AS 1012.5:2014 Methods of testing concrete, Method 5: Determination of mass per unit volume of freshly mixed concrete

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., mass volume volume fraction

• ASHRAE 4406-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls

NL-NEN, mass volume volume fraction

• NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
• NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

Canadian General Standards Board （CGSB), mass volume volume fraction

• CGSB 1-GP-71 METH 2.1-1995 Methods of Testing Paints and Pigments Density (Mass Per Unit Volume)

IN-BIS, mass volume volume fraction

• IS 6849 Pt.1-1993 Positive displacement vacuum pumps. Measurement of performance characteristics. Part 1: Measurement of volume rate of flow (Pumping speed) (First Revision)
• IS 4471-1981

未注明发布机构, mass volume volume fraction

• DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics

国家市场监督管理总局、中国国家标准化管理委员会, mass volume volume fraction

• GB/T 31838.7-2021 Solid insulating materials—Dielectric and resistive properties—Part 7:Resistive properties(DC method)—Measurement of volume resistance and volume resistivity at elevated temperatures

Natural Gas Processor's Association (NGPA), mass volume volume fraction

• GPA RR-61-1982 Evaluation of the GPA Engineering Data Book Volume Correction Factor Table for Light Ends

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, mass volume volume fraction

• GB/T 13477.19-2017 Test method for building sealants—Part 19：Determination of change in mass and volume
• GB/T 34287-2017 Greenhouse gas—Methane measurement—Off-axis integrated cavity output spectroscopy method
• GB/T 33916-2017 Animal and vegetable fats and oils—Determination of conventional mass per volume (liter weight in air)
• GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method
• GB/T 34286-2017 Greenhouse gas—Carbon dioxide measurement—Off-axis integrated cavity output spectroscopy method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, mass volume volume fraction

• GJB 5443-2005 Specification for high volume fraction SiCp/Al composites

National Metrological Technical Specifications of the People's Republic of China, mass volume volume fraction

• JJF 1618-2017 Calibration Specification for Insulating Oil Dielectric Dissipation Factor and Volume Resistivity Testers

Professional Standard - Commodity Inspection, mass volume volume fraction

• SN/T 1797.12-2008 Technical regulation on safety and sanitation for inspection of iron ore.Part 12:Bulk density for quality evaluation

PT-IPQ, mass volume volume fraction

• NP 1014-1987
• NP EN 547-2-2000 Safety of machinery Human body measurements Part 2:Principles for determining the dimensions required for access openings
• E 209-1967

Professional Standard - Petrochemical Industry, mass volume volume fraction

• SH/T 1836-2023 Plastics - Determination of the melt volume-flow rate (MVR) of ultra-high molecular weight polyethylene (PE-UHMW)

Professional Standard - Petroleum, mass volume volume fraction

• SY/T 6890.1-2012 Operation and maintenance regulations for flowmeter.Part 1: Liquid positive displacement flowmeter

Professional Standard - Agriculture, mass volume volume fraction

• NY/T 1881.6-2010 Densified biofuel-Test methods Part 6:Bulk density

HU-MSZT, mass volume volume fraction

• MSZ 18286/1-1979

American Railway Engineering and Maintenance-of-Way Association (AREMA), mass volume volume fraction

• AREMA CH 3-8-1995 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote

Others:   volume mass fraction, Volume fraction, mass volume fraction, mass fraction volume fraction, volume fraction mass fraction, fractional volume, mass fraction, volume fraction, fractional volume, mass fraction + volume fraction, mass fraction volume fraction, volume fraction mass fraction, volume fraction mass, volume fraction mass fraction, mass fraction volume fraction, mass fraction volume, volume fraction, mass fraction, Volume? Mass fraction, volume mass fraction, mass fraction volume, mass volume volume fraction.