The use of true density meter

The use of true density meter, Total:184 items.

In the international standard classification, The use of true density meter involves: Road engineering, Soil quality. Pedology, Radiation measurements, Crude petroleum, Electronic tubes, Rubber and plastics products, Glass, Waxes, bituminous materials and other petroleum products, Fuels, Materials for aerospace construction, Construction materials, Products of the chemical industry, Refractories, Road vehicles in general, Powder metallurgy, Measurement of volume, mass, density, viscosity, Thermodynamics and temperature measurements, Packaging materials and accessories, Measurement of fluid flow, Analytical chemistry, Linear and angular measurements, Pipeline components and pipelines, Applications of information technology, Cereals, pulses and derived products, Iron and steel products.

RU-GOST R, The use of true density meter

GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
GOST 32722-2014 Automobile roads of general use. Natural and crushed sand. Determination of the true density
GOST 32821-2014 Automobile roads of general use. Rubble and sand slag. The definition of true density and porosity
GOST 33057-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Definition of average and true density, porosity and water absorption
PNST 131-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the density of the place of application with a gamma densitometer
GOST 32764-2014 Automobile roads of general use. Mineral powder. Method for determination of medium density and porosity
GOST 32822-2014 Automobile roads of general use. Slag rubble and sand. Determination of bulk density and voidness
GOST 32721-2014 Automobile roads of general use. Natural and crushed sand. Determination of bulk density and emptiness
GOST 32815-2014 Automobile roads of general use. Slag rubble. Determination of medium density and water absorption
PNST 124-2016 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method for determination of bulk density and the emptiness
GOST 33047-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of bulk density and voidness
PNST 92-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of maximum density
PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density
PNST 107-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density, using paraffined samples
PNST 77-2015 Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Method for determination of the maximum destiny of mineral powder
GOST 8.171-1975 State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications
PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
PNST 71-2015 Automobile roads of general use. Mineral materials for preparing fine-grained asphalt concrete mixtures. Method for determination of density and absorption
PNST 78-2015 Automobile roads of general use. Mineral materials for preparing coarse-grained asphalt concrete mixtures. Method for determination of density and absorption

Standard Association of Australia （SAA）, The use of true density meter

AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
AS 1289.5.8.4:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1289.5.8.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture?Density gauge - Direct transmission mode
AS 1289.5.5.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
AS 1289.5.6.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS 1289.6.3.2:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test

CZ-CSN, The use of true density meter

CSN 44 1324-1985 Determination of the bulk density of coal for special purposes
CSN 44 1324-1963 Determination of ?he bulk density of coal for special purposes

Korean Agency for Technology and Standards (KATS), The use of true density meter

KS A 3010-1986 Glossary of terms used in instrumentation Accuracy and precision
KS C IEC 60692-2019 Nuclear instrumentation－Density gauges utilizing ionizing radiation－Definitions and test methods
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS A ISO 5725-6-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 6：Use in practice of accuracy values
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS K ISO 2649-2019 Wool－Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester
KS D ISO 16413:2021 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

GSO, The use of true density meter

GSO IEC 61874:2015 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
BH GSO IEC 61874:2016 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
OS GSO ISO 5725-6:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
GSO ASTM D3981:2021 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

American Society for Testing and Materials (ASTM), The use of true density meter

ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM D6857/D6857M-23 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D2638-10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-23 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D5004-11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM D3981-95 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-08 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09a(2024)e1 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM PS132-01 Standard Provisional Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)
ASTM PS131-01 Standard Provisional Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7370/D7370M-14(2021) Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM D7370-08 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer

SCC, The use of true density meter

CIE 224:2017 CIE 2017 Colour Fidelity Index for accurate scientific use
NS 4512:1981 Long enclosed-scale thermometers for precision use
NS 4512:1969 Long enclosed-scale thermometers for precision use
UNE 84003:1978 PURIFIED GLYCEROL FOR COSMETIC USE. DETERMINATION OF DENSITY AT 20 ºC
DIN IEC 60692:2001 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods (IEC 60692:1999)
AS K154.6:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 6: Determination of consistency of sealers by extrudiometer
AS K154.6:1970 Methods of test for sealers and adhesives (for automotive purposes), Method 6: Determination by pressure extrudiometer of the consistency of sealers
AASHTO T 331-2013(2017) Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method (ASTM Designation: D6752/D6752M-11)
AASHTO T 331-2022 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method (ASTM Designation: D6752/D6752M-11)
BS 3483-B8:1974 Methods for testing pigments for paints. Determination of density relative to water at 4.C (using vacuum to remove entrained air)
AS K154.7:1970 Methods of test for sealers and adhesives (for automotive purposes), Method 7: Determination by pressure extrudiometer of the consistency of sealers after accelerated ageing
AASHTO TP 85-2010(2016) Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument

British Standards Institution (BSI), The use of true density meter

24/30490989 DC BS IEC 61874 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
BS ISO 5725-6:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 6 : Use in practice of accuracy values
BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results. Use in practice of accuracy values
BS IEC 60692:2000 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods
BS EN 1094-4:1995 Insulating refractory products - Determination of bulk density and true porosity
BS ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements alignment and positioning, data collection, data analysis and reporting

Professional Standard - Electron, The use of true density meter

SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method

工业和信息化部, The use of true density meter

SJ/T 10943-2020 Density balance method for determination of particle size distribution of corundum powder for electric vacuum devices

Association Francaise de Normalisation, The use of true density meter

NF EN IEC 60335-2-119/A11:2024 Household and similar electrical appliances - Safety - Part 2-119: special requirements for vacuum sealers for commercial use
NF EN IEC 60335-2-119:2024 Household and similar electrical appliances - Safety - Part 2-119: special requirements for vacuum sealers for commercial use
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
NF T47-505:1991 Rubber O-rings. General purpose products of superior quality for static and dynamic industrial applications. Precision class G. Quality class 2.
NF T47-504:1991 Rubber O-rings. General purpose products of ordinary quality for static and dynamic industrial applications. Precision class G. Quality class 4.
NF E48-064-6*NF ISO 8434-6:2009 Metallic tube connections for fluid power and general use - Part 6 : 60o cone connectors with or without O-ring

BE-NBN, The use of true density meter

NBN E 62-001-1973 Test conditions for general purpose parallel lathes. Precise prosecution

Malaysia Standards, The use of true density meter

MS 1478-1999 Specification for low-density polyethylene films for general use and packaging applications

AT-ON, The use of true density meter

ONORM B 3683-1991 Technical asphalts for road construction and related purposes — Determination of bulk density

YU-JUS, The use of true density meter

JUS B.E4.340-1984 Laboratorf glassmre andaccessories. Density hydrometers for generalpurposes

Society of Automotive Engineers (SAE), The use of true density meter

SAE AMS3358B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa-s) Viscosity
SAE AMS3361B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa-s) Viscosity
SAE AMS3359B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa-s) Viscosity
SAE AMS3361C-2012 Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 140 to 400 Poise (15 to 40 Pa˙s) Viscosity
SAE AMS3358C-2012 Silicone Potting Compound, Elastomeric, Two-Part General Purpose, 80 to 180 Poise (8 to 18 Pa˙s) Viscosity

KR-KS, The use of true density meter

KS A ISO 5725-6-2023 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
KS B ISO 649-1-2017 Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification
KS D ISO 16413-2021 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

AASHTO - American Association of State Highway and Transportation Officials, The use of true density meter

T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
TP 69-2004 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method (ASTM Designation D: 6752-02a)
TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)

The American Road & Transportation Builders Association, The use of true density meter

AASHTO TP 69-2004 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2023 Bulk Specific Gravity (G_mb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge 2000 Edition; Interim Edition 4/2001 R(1996)
AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO TP 85-2010(R2016) Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument

Professional Standard - Non-ferrous Metal, The use of true density meter

YS/T 587.9-2006 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method

European Committee for Standardization (CEN), The use of true density meter

EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 10305-2:2002 Steel tubes for precision applications Technical delivery conditions Part 2: Welded cold drawn tubes
EN 10305-1:2002 Steel tubes for precision applications Technical delivery conditions Part 1: Seamless cold drawn tubes
EN 10305-3:2002 Steel tubes for precision applications Technical delivery conditions Part 3: Welded cold sized tubes
EN 10305-4:2003 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-5:2003 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes

International Electrotechnical Commission (IEC), The use of true density meter

IEC 60692:1999 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods

IN-BIS, The use of true density meter

IS 4848-1981 Method for determination of apparent density of free-flowing powders FdR Powder metallurgy applications

AENOR, The use of true density meter

UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
UNE 400311-1:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 1: SPECIFICATION.
UNE 400311-2:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 2: TEST METHODS AND USE.

GOSTR, The use of true density meter

PNST 324-2019 Automobile roads of general use. Soils. Determination of optimum moisture and maximum density by Proctor method
GOST R 58401.10-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determining of bulk density
GOST R 58401.16-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determination of maximum density
GOST R 58400.8-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the flexural creep stiffness at subzero temperatures using the bending beam rheometer (BBR)
GOST R 58401.22-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Determination of the density of the layer by a nondestructive methods
GOST R 58401.20-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determination of bulk density, using paraffined samples

GOST, The use of true density meter

GOST R 70456-2022 Automobile roads of general use. Soils. Determination of optimum moisture and maximum density by Proctor method

Japanese Industrial Standards Committee (JISC), The use of true density meter

JIS B 7411-2:2014 Glass thermometers for general -- Part 2: Measuring instruments used in transaction or certification
JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)

ES-UNE, The use of true density meter

UNE 400311-1:1998 ERRATUM:2011 Laboratory glassware. Density hydrometers for general purposes. Part 1: Specification.

German Institute for Standardization, The use of true density meter

DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN 1094-4:1995 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995

未注明发布机构, The use of true density meter

AS 1289.5.5.1:1998(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
AS 1289.5.6.1:1998(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material

European Committee for Electrotechnical Standardization（CENELEC）, The use of true density meter

EN 61061-1:2006 Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 1: Definitions, Designations and General Requirements

CENELEC - European Committee for Electrotechnical Standardization, The use of true density meter

EN 61061-1:1998 Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 1: Definitions@ Designations and General Requirements

International Organization for Standardization (ISO), The use of true density meter

ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry - Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

CEN - European Committee for Standardization, The use of true density meter

EN 10305-5:2010 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes

VN-TCVN, The use of true density meter

TCVN 4996-2-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 2: Method of traceability for measuring instruments through reference to the international standard instrument