ZH
RU
ES

How to analyze spectral analysis

How to analyze spectral analysis, Total:500 items.

In the international standard classification, How to analyze spectral analysis involves: Optics and optical measurements, Non-ferrous metals, Analytical chemistry, Ferrous metals, Fibre optic communications, Non-metalliferous minerals, Products of non-ferrous metals, Powder metallurgy, Standardization. General rules, Electronic components in general, Information sciences. Publishing, Testing of metals, Education, Particle size analysis. Sieving, Nuclear energy engineering, Reinforced plastics, Non-destructive testing, Ferroalloys, Metalliferous minerals, Iron and steel products, Vocabularies, Woodworking equipment, Optoelectronics. Laser equipment, Construction materials, Natural gas, Refractories, Products of the chemical industry, Special measuring equipment for use in telecommunications, Coals, Lubricants, industrial oils and related products, Water quality, Test conditions and procedures in general, Jewellery, Pipeline components and pipelines, Paint ingredients, Fuels, Surface treatment and coating, Products of the textile industry, Electrical wires and cables, Protection against fire.

Taiwan Provincial Standard of the People's Republic of China, How to analyze spectral analysis

CNS 14341-1999 Optical spectrum analyzer
CNS 12416-1988 Genenral Rules for Emission Spectroscopic Analysis
CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 12416-2006 General rules for atomic emission spectrometry
CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 10006-1984 Method for Photoelectric Emission Spectrochemical Analysis of Iron And Steel
CNS 9705-1984 General Rules for Emission-Spectroscopic Analysis of Iron and Steel
CNS 10503-1984 Emission-Spectroscopic Analysis for Pig Iron and Cast Iron
CNS 11209-1995 General Rules for Chemical Analysis by Atomic Absorption Spectrophotometry
CNS 11206-2002 Iron and steel─Methods for atomic absorption spectrometric analysis
CNS 9706-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Iron and Steel
CNS 13921-1997 Method of atomic emission spectrophotoelectric analysis for die casting zinc alloy
CNS 12126-1987 Method of Chemical Analysis by Atomic Absorption Spectrophotometry for Copper and Copper Alloys
CNS 13388-1994 Methods for Inductively Coupled Plasma Emission Spectrochemical Analysis of Steel
CNS 11071-1984 Emission-Spectroscopic Analysis for Carbon Steel and Low Alloy Steel
CNS 10005-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Metallic Materials
CNS 12013-1987 Method of Test for Lead in Gasoline by Atomic Absorption Spectrometry
CNS 12788-1990 Method of X-ray Fluorescence Spectrometric Analysis of Refractory Bricks and Refractory Mortars

RO-ASRO, How to analyze spectral analysis

STAS 1706/17-1971 CUPPER speelrochemical analysis
STAS 11464-1980 IRON AND STEEL Spectrochemical analysis
STAS 5177-1981 EMISSION SPECTROGRAPHICAL ANALYSIS Terminology
STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
STAS 12368-1985 Modifier alloys for cast irons SPECTROGRAPHIC ANALYSIS BY EMISSION
STAS 10837/1-1977 SELENIUM General specifications for chemical and spectral analysis
STAS 1776/1-1978 LEAD General specifications for carrying out chemical and spectral analysis
STAS 1706/1-1985 COPPKH General directions for c?emical and spectral analysis carrying-out
STAS 1776/14-1978 LEAD Emission spectral analysis with direct reading

U.S. Air Force, How to analyze spectral analysis

AIR FORCE A-A-59684 A-2009 OPTICAL SPECTRUM ANALYZER
AIR FORCE A-A-59684-2004 OPTICAL SPECTRUM ANALYZER

Korean Agency for Technology and Standards (KATS), How to analyze spectral analysis

KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
KS M 0028-2009(2019) General rules for light emission spectrochemical analysis
KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
KS D ISO 3815-2002(2006) Zinc and zinc alloys－Spectrographic analysis
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS D ISO 3815:2011 Zinc and zinc alloys－Spectrographic analysis
KS D 2558-1995 Method for emission spectrographic analysis of tantalum
KS D 2553-2015 Tantalum－Method for atomic absorption spectrometric analysis
KS D 1684-1993 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-1993 Methods for emission spectrochemical analysis of lead ingot
KS D 1684-1985 Methods for emission spectrographic analysis of magnesium ingot
KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D 1654-1993 General Rules for X-ray Fluorescence Spectrometric Analysis of Iron and Steel
KS D 1682-2020 Method for photoelectric emission spectrochemical analysis of lead metal
KS D 1654-2003(2016) General rules for X-ray fluorescence spectrometric analysis of iron and steel
KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
KS D 2553-2015(2020) Tantalum－Method for atomic absorption spectrometric analysis
KS E 3030-2007(2012) Atomic absorption spectrochemical analysis for iron ores
KS D 2568-2019 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
KS E 3030-1982 Atomic absorption spectrochemical analysis for iron ores
KS M 0012-2009(2019) General rules for molecular absorptiometric analysis
KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
KS M 0017-1995 General rules for X-ray fluorescence spectrometric analysis
KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
KS M 0016-1995 General rules for atomic absorption spectrochemical analysis
KS D 1681-1993 Method for emission spectrochemical analysis of aluminium ingot
KS D 2086-1993 Methods for emission spectrochemical analysis of titanium
KS M 0016-2010(2020) General rules for atomic absorption spectrochemical analysis
KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
KS D 1684-2008(2018) Methods for emission spectrographic analysis of magnesium ingot
KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
KS D 1683-1993 Method for emission spectrochemical analysis of silver ingot
KS D 1681-2018 Method for emission spectrochemical analysis of aluminium ingot
KS M 0032-2009(2019) General rules for ICP emission spectrochemical analysis
KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D 1650-1993 General rules for photoelectric emission spectrochemical analysis of metal materials
KS D ISO 3816:2011 Zinc ingots－Selection and preparation of samples for spectrographic analysis
KS D 1685-1993 Methods for emission spectrochemical analysis of zinc metal
KS D 1658-1993 Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D 1658-2003(2016) Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D 1687-2007 Emission-spectroscopic analysis for pig iron and cast iron
KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 1899-2019 Methods for photoelectric emission spectrochemical analysis of electrolytic cathode copper
KS D 1929-2019 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
KS D 1929-2004 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
KS D 2597-1996(2021) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS D ISO 17973-2011(2021) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS D ISO 19319:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D 1679-1993 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS D ISO 3816-2002(2006) Zinc ingots－Selection and preparation of samples for spectrographic analysis
KS D ISO 14594:2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
KS L 3316-2009 Method for X-ray fluorescence spectrometric analysis of refractory brikcs and refractory mortars
KS E 3075-2002 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
KS D 1852-2015 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys

RU-GOST R, How to analyze spectral analysis

GOST 8776-1999 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 16274.8-1977 Bismuth. Spectral methods of analysis
GOST 14339.5-1991 Tungsten. Methods of spectral analysis
GOST 8857-1977 Lead. Method of spectral analysis
GOST 12223.0-1976 Iridium. Method of spectral analysis
GOST 12227.0-1976 Rodium. Method of spectral analysis
GOST 14316-1991 Molybdenum. Spectrum analysis methods
GOST 8776-1979 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 18895-1997 Steel. Method of photoelectric spectral analysis
GOST 17261-1977 Zinc. Spectral method of analysis
GOST 15483.10-2004 Tin. Methods of atomic-emission spectral analysis
GOST 3221-1985 Primary aluminium. Methods of spectral analysis
GOST 12228.1-1978 Ruthenium. Method of spectral analysis
GOST 17818.15-1990 Graphite. Method of spectrum analysis
GOST 22397-1977 Zinc powder. Method of spectral analysis
GOST 27611-1988 Cast iron. Photoelectrical sspeciral method of analisis
GOST 18895-1981 Steel. Method of photoelectric spectral analysis
GOST 15483.10-1978 Tin. Spectral methods for determination of bismuth, iron, copper, arsenic, lead, antimony, zinc and aluminium
GOST 23328-1995 Zinc alloys. Methods of spectral analysis
GOST 1367.1-1983 Antimony. Spectral method for the determination of impurities without preliminary concentration
GOST 1367.11-1983 Antimony. Chemical-spectral method of analysis
GOST 7727-1981 Aluminium alloys. Methods of spectral analysis
GOST 7728-1979 Magnesium alloys. Methods of spectral analysis
GOST 12224.1-1978 Osmimum. Chemical-spectral method of analysis
GOST 13348-1974 Antimonous antimonides. Method of spectral analysis
GOST 23902-1979 Titanium alloys. Methods of spectral analysis
GOST 7.28-1980 System of standards "information, libraries and publishing". Representation of extended Latin alphabet for information interchange on magnetic tapes
GOST 23328-1978 Zinc antifriction alloys. Methods of spectral analysis
GOST 29103-1991 Tungsten, molibdenum. General requirements for methods of chemical and spectral analysis
GOST 30082-1993 Zinc-aluminium alloys. Spectral method of analysis
GOST 27809-1995 Cast iron and steel. Methods of spectrographic analysis
GOST 9816.4-1984 Technical tellurium. Method of spectral analysis
GOST 12551.2-1982 Alloys platinum-copper. Methods of spectral analysis
GOST 12553.2-1977 Platinum-palladium alloys. Method of spectral of analysis
GOST 12554.2-1983 Platinum-ruthenium alloys. Method of spectral analysis
GOST 12555.2-1983 Silver-platinum alloys. Method of spectral analysis
GOST 12556.2-1982 Alloys platinum-rhodium. Methods of spectral analysis
GOST 12558.2-1978 Palladium-silver alloys. Method of spectral of analysis
GOST 12562.2-1982 Alloys gold-platinum. Methods of spectral analysis
GOST 12563.2-1983 Gold-palladium alloys. Method of spectral analysis
GOST 16321.2-1970 Silver-copper alloys. Method of spectral analysis
GOST 16273.1-1985 Technical selenium. Method of spectral analysis
GOST 27809-1988 Steel and cast iron. Methods of spectropgapnic analysis
GOST 17261-2008 Zinc. Methods of atomic-emission spectral analysis
GOST 16274.1-1977 Bismuth. Method of spectrochemical analysis
GOST 12550.2-1982 Palladium-iridium alloys. Methods of spectrografic analysis
GOST 12552.2-1977 Platinum-nickel alloys. Method of spectral of analysis
GOST 12559.2-1982 Rlatinum-iridium alloys. Methods of spectrografic analysis
GOST 12560.2-1978 Palladium-silver-cobalt alloys. Method of spectral analysis
GOST 12561.2-1978 Palladium-silver-copper alloys. Method of spectral analysis
GOST 12564.2-1983 Aurrum-palladium-platinum alloys. Method of spectral analysis
GOST 25567-1982 Concentrated kaolin. Spectrum analysis method
GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
GOST R 55080-2012 Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST 27981.1-1988 Copper of high purity. Methods of atomic-spectral analysis
GOST 27981.1-2015 High purity copper. Method of atomic-spectral analysis
GOST 20997.0-1981 Thallium. General requirements for methods of spectral analysis
GOST R 54153-2010 Steel. Method of atomic emission spectral analysis
GOST 6012-2011 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 23201.0-1978 Alumina. General requirements for methods of spectral analysis
GOST 8776-2010 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 6012-1978 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
GOST 9717.3-1982 Copper. Method of spectral analysis of oxide standart specimens
GOST 11884.15-1982 Tungsten concentrate. General requirements for methods of spectrum analysis
GOST 30508-1997 Lead concentrates. Method of spectrum analysis
GOST 12645.8-1982 Indium. Method of chemical and spectral analysis for the determination of tin
GOST 16273.0-1985 Technical selenium. General requirements for method of spectral analysis
GOST 26473.13-1985 Vanadium base alloys and alloying elements. Method of spectral analysis
GOST 9519.3-1977 Lead-calcium bearing alloys. Method of atomic-absorbing spectral analysis

BR-ABNT, How to analyze spectral analysis

ABNT P-EB-304-1969

ZA-SANS, How to analyze spectral analysis

SANS 5567:1968 Spectrographic analysis of copper
SANS 62129:2008 Calibration of optical spectrum analyzers

European Committee for Standardization (CEN), How to analyze spectral analysis

CEN EN 62129-2006 Calibration of optical spectrum analyzers
CEN EN 62129-2006_ Calibration of optical spectrum analyzers
EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
PREN 14726-2003 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
CEN EN 14726-2005 Aluminium and aluminium alloys — Chemical analysis — Guideline for spark optical emission spectrometric analysis
EN 12019:1997 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
PD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry

Association Francaise de Normalisation, How to analyze spectral analysis

NF C93-845:2006 Calibration of optical spectrum analyzers.
NF A06-590:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis.
NF X11-672:1996 Particle size analysis. Photon correlation spectroscopy.
NF A07-510X2:1975 ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.
NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
NF A06-840:1998 Zinc and zinc alloys. Optical emission spectrometric analysis.
NF A07-510:1971 Analysis of non-alloyed aluminium by emission spectrography.
NF A07-515:1971 Analysis of aluminium copper alloys by emission spectrography.
NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
NF A07-500:1979 Analysis of aluminium and its alloys by emission spectrometry.
NF A06-012*NF EN 14242:2005 Aluminium and aluminium alloys - Chemical analysis - Inductive coupled plasma-optical emission spectrometric method
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF X21-002:2007 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy.
NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
NF A07-520:1971 Analysis of aluminium silicon and aluminium-silicon-copper alloys by emission spectrography.
NF A07-830:1973 Zinc for galvanizing purposes. Technical specification for emission spectral analysis.
NF A01-811:1975 Zinc ingots. Selection and preparation of samples for spectrographic analysis.
NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
A08-652:1994 Chemical analysis of titanium and titanium alloys. Rules to be followed for plasma emission spectrometrie analysis.

British Standards Institution (BSI), How to analyze spectral analysis

BS EN 62129:2006 Calibration of optical spectrum analyzers
BS ISO 13424:2013 Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
BS EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
PD ISO/TS 15338:2020 Surface chemical analysis. Glow discharge mass spectrometry. Operating procedures
BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS EN 12019:1998 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
BS ISO 11505:2012 Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
BS EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
BS ISO 10810:2019 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS ISO 16962:2017 Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
22/30444828 DC BS EN 14242. Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
PD ISO/TS 25138:2019 Tracked Changes. Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
BS ISO 24417:2022 Surface chemical analysis. Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
BS ISO 17560:2002 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
BS ISO 17560:2014 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
BS ISO 14707:2000 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use

Professional Standard - Electron, How to analyze spectral analysis

SJ 2656-1986 Mothod of tungsten spectral analysis
SJ 2657-1986 Mothod of molybdeuum spectral analysis
SJ/Z 3206.10-1989 General rules for analysis of properties of emision spectrum
SJ/Z 3206.11-1989 General rules for analysis of quantities of emision spectrum
SJ/Z 1544-1979 Method for spectral analysis of Nickel-- Tungsten-Magnesium alloy
SJ/Z 3206.7-1989 Geneeral rules for preparation and sampling sample for emission spectrum analysis
SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum
SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum
SJ/Z 3206.8-1989 Geneeral rules for preparation of standard sample for spectrum analysis
SJ/Z 3206.12-1989 General rules for emission spectrum analysis for vacuum materials
SJ/Z 3206.13-1989 General rules for emision spectrum analysis for semiconductor materials

Professional Standard - Non-ferrous Metal, How to analyze spectral analysis

YS/T 82-2006 Basis platinum as spectral analysis
YS/T 83-2006 Basis palladium as spectral analysis
YS/T 84-2006 Basis iridum as spectral analysis
YS/T 85-2006 Basis rhodium as spectral analysis
YS/T 82-1994 Platinum substrates for spectroscopic analysis
YS/T 83-1994 Palladium Matrix for Spectroscopic Analysis
YS/T 84-1994 Iridium matrix for spectroscopic analysis
YS/T 85-1994 Rhodium Matrix for Spectroscopic Analysis
YS/T 631-2007 Methods for analysis of zinc.The optical emission spectrometry
YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
YS/T 559-2009 Methods for emission spectrum analysis of tungsten
YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
YS/T 464-2003 Methods for analytical of copper cathode-The optical emission spectrometry
YS/T 482-2005 Methods for analysis of copper and copper alloys-The atomic emission spectrometry
YS/T 361-2006 Determination of trace impurities in purity platinum by atomic emission spectrometric
YS/T 362-2006 Determination of trace impurities in purity palladium by atomic emission spectrometric
YS/T 363-2006 Determination of trace impurities in purity rhodium by atomic emission spectrometric
YS/T 364-2006 Determination of trace impurities in purity iridium by atomic emission spectrometric
YS/T 361-1994 Emission Spectral Analysis of Impurity Elements in Pure Platinum
YS/T 362-1994 Emission spectrum analysis of impurity elements in pure palladium
YS/T 363-1994 Emission spectrum analysis of impurity elements in pure rhodium
YS/T 364-1994 Emission Spectral Analysis of Impurity Elements in Pure Iridium
YS/T 1036-2015 Test method of optical emission spectrometric analysis of magnesium rare earth alloys
YS/T 365-2006 Determination of trace impurities in high purity palladium by atomic emission spectrometric
YS/T 365-1994 Emission Spectrum Analysis of Impurity Elements in High Purity Platinum

International Electrotechnical Commission (IEC), How to analyze spectral analysis

IEC PAS 62129:2004 Calibration of optical spectrum analyzers
IEC 62129:2006 Calibration of optical spectrum analyzers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to analyze spectral analysis

GB/T 5123-1985 Nickel--Method of spectral analysis
GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
GB/T 42360-2023 Total Reflection X-ray Fluorescence Spectroscopic Analysis of Water for Surface Chemical Analysis
GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
GB/T 30704-2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Guidelines for analysis
GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
GB/T 9259-1988 Terminology of emission spectochemical analysis
GB/T 6040-2002 General rules for infrared analysis
GB/T 5871-1986 Method for spectrographic analysis of aluminium and its alloys
GB/T 15337-1994 General rules for atomic absorption spectrometric analysis
GB/T 15337-2008 General rules for atomic absorption spectrometric analysis
GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 5678-1985 The method for sampling cast alloys for spectrochemical analysis
GB/T 5678-2013 Sampling methods of spectrochemical analysis for cast alloys
GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
GB/T 14203-1993 General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
GB/T 26042-2010 Methods for analysis of zinc and zinc alloys.The optical emission spectrometry
GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
GB/T 7999-2015 Optical emission spectrometric analysis method of aluminum and aluminum alloys
GB/T 7999-2007 Optical emission spectrometric analysis method of aluminum and aluminum alloys
GB/T 14203-2016 General rules for spark discharge atomic emission spectrometry

Danish Standards Foundation, How to analyze spectral analysis

DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
DS/EN 62129:2006 Calibration of optical spectrum analyzers
DS/EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
DS/EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
DS/EN 15079:2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)

IN-BIS, How to analyze spectral analysis

Japanese Industrial Standards Committee (JISC), How to analyze spectral analysis

JIS C 6192:2008 Calibration of optical spectrum analyzers
JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
JIS H 1691:1968 Method for spectrochemical analysis of tantalum
JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
JIS H 1123:2021 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
JIS H 1683:2002 Tantalum -- Method for atomic absorption spectrometric analysis
JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS K 0214:2006 Technical terms for analytical chemistry (Chromatography part)
JIS C 6183-1:2019 Optical spectrum analyzers -- Part 1: Test methods
JIS K 0214:2013 Technical terms for analytical chemistry (Chromatography part)
JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
JIS G 1202:1975 General rules on emission-spectroscopic analysis for iron and steel
JIS G 1257:1994 Iron and steel -- Methods for atomic absorption spectrometric analysis
JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
JIS H 1303:1976 Method for emission spectrochemical analysis of aluminium ingot
JIS H 1322:1976 Method for emission spectrochemical analysis of magnesium ingot
JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 2:2013 Iron and steel.Method for X-ray fluorescence spectrometric analysis (Amendment 2)
JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal
JIS H 1183 AMD 1:2012 Method for emission spectrochemical analysis of silver bullion (Amendment 1)
JIS G 1251:1976 Emission-spectroscopic analysis for pig iron and cast iron
JIS C 6183:1992 Test methods of fiber-optic spectrum analyzer
JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
JIS H 1103:1995 Method for photoelectric emission spectrochemical analysis of electrolytic cathode copper
JIS H 1560:2016 Method for photoelectric emission spectrochemical analysis of die casting zinc alloys
JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
JIS H 1306:1992 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
JIS G 1257 AMD 2:2000 Iron and steel -- Methods for atomic absorption spectrometric analysis (Amendment 2)
JIS G 1253:2002 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis
JIS H 1305:1976 Method for photoelectric emission spectrochemical analysis of aluminium and aluminium alloy

National Metrological Verification Regulations of the People's Republic of China, How to analyze spectral analysis

JJG 1035-2022 Communication Spectrum Analyzer
JJG(电子) 30901-2006 Verification Regulations for Spectrum Analyzers
JJG 1035-2008 Verification Regulation of Optical Spectrum Analyzers in Telecommunication
JJG 955-2000 Verification Regulation of Special Analysis Microdensitimeters

工业和信息化部, How to analyze spectral analysis

YS/T 84-2020 Iridium matrix for spectroscopic analysis
YS/T 82-2020 Platinum matrix for spectroscopic analysis
YS/T 83-2020 Palladium matrix for spectroscopic analysis
YS/T 85-2020 Rhodium matrix for spectroscopic analysis
YS/T 464-2019 Direct reading spectroscopic analysis method of copper cathode

CEN - European Committee for Standardization, How to analyze spectral analysis

EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry

Professional Standard - Education, How to analyze spectral analysis

JY/T 0571-2020 General Rules of Fluorescence Spectroscopy Analysis Methods
JY/T 0566-2020 General rules for atomic fluorescence spectrometry
JY/T 0573-2020 General Rules of Laser Raman Spectroscopy Analysis Method
JY/T 002-1996 General Rules for Laser Raman Spectroscopy Analysis Methods
JY/T 0572-2020 General Rules for Analytical Methods of Circular Dichroism Spectroscopy
JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry
JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry

International Organization for Standardization (ISO), How to analyze spectral analysis

ISO 3815:1976 Zinc and zinc alloys; Spectrographic analysis
ISO 13321:1996 Particle size analysis - Photon correlation spectroscopy
ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
ISO/TS 25138:2019 Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO 16962:2017 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
ISO 16962:2005 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 24417:2022 Surface chemical analysis — Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
ISO/TS 18507:2015 Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
ISO/TR 19319:2003 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area, and sample area viewed by the analyser
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO 3816:1976 Zinc ingots; Selection and preparation of samples for spectrographic analysis
ISO/DIS 14594 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy

Standard Association of Australia （SAA）, How to analyze spectral analysis

AS 4549.1:1999 Particle size analysis - Photon correlation spectroscopy
AS 2347:1998 Zinc and zinc alloys - Sampling for chemical and spectrochemical analysis
AS ISO 19319:2006 Surface chemical analysis - Augur electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area and sample area viewed by the analyser

German Institute for Standardization, How to analyze spectral analysis

DIN ISO 13321:2004 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
DIN EN 62129:2007 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006
DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
DIN EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; English version of DIN EN 14726:2005
DIN EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis; German version EN 14242:2004
DIN EN 14242:2023-04 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis; German version EN 14242:2023
DIN EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN ISO 11505:2018-02 Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry (ISO 11505:2012)
DIN ISO 16962:2018 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry (ISO 16962:2017)

AENOR, How to analyze spectral analysis

UNE-EN 14726:2006 Aluminum and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectometric analysis

国家市场监督管理总局、中国国家标准化管理委员会, How to analyze spectral analysis

GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 6040-2019 General rules for infrared analysis
GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
GB/T 39540-2020 Fast determination of shale gas composition—Laser Raman spectroscopy
GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis
GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy

(U.S.) Ford Automotive Standards, How to analyze spectral analysis

FORD FLTM EU-AJ 051-01-2000 METHOD OF CARBON TYPE ANALYSIS OF LUBRICATING OILS BY INFRARED SPECTROSCOPY

American Society for Testing and Materials (ASTM), How to analyze spectral analysis

ASTM C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E718-80 Method for Spectrographic Analysis of Cartridge Brass
ASTM C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E1621-21 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E716-94(2002) Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM C809-94(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
ASTM D5381-93(2003) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM D5381-93(1998) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM E1835-14 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

CZ-CSN, How to analyze spectral analysis

CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
CSN 42 1211-1986 The sampling of technical iron for spectrometric and chemical analysis
CSN 42 0600 Cast.2-1975 Antimony of high purity. Methods of chemical and spectral analysis. Preparation of the sample
CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method
CSN 42 0600 Cast.1-1975 Antimony of high purity. Methods of chemical and spectral analysis General data
CSN 42 0600 Cast.4-1975 Antimony of high purity. Method of chemical and spectral anaysis.Determination of sulfur by aombustion method

Lithuanian Standards Office , How to analyze spectral analysis

LST EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
LST EN 62129-2006 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 62129-2006/AC-2007 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 14242-2005 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
LST EN 15079-2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to analyze spectral analysis

GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry
GB/T 32997-2016 Surface chemical analysis—General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry

Professional Standard - Ferrous Metallurgy, How to analyze spectral analysis

YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry
YB/T 4142-2006 Statistical rules for processing spectral analysis data

Professional Standard - Commodity Inspection, How to analyze spectral analysis

SN/T 3914-2014 General rules for infrared spectrometer in minerals
SN/T 2785-2011 Photoelectric Emission Spectroscopic Analysis of Zinc and Zinc Alloys
SN/T 2786-2011 Photoelectric Emission Spectroscopic Analysis of Magnesium and Magnesium Alloys
SN/T 2083-2008 Method for analysis of brass.Spark discharge atomic emission spectrometric

BE-NBN, How to analyze spectral analysis

NBN P 32-015-1977 zinc and zinc alloys - Spectrographic analysis

The American Road & Transportation Builders Association, How to analyze spectral analysis

AASHTO DIVISION I-A 4.4 Single Mode Spectral Analysis Method - Procedure 2

AASHTO - American Association of State Highway and Transportation Officials, How to analyze spectral analysis

DIVISION I-A 4.5-1996 Multimode Spectral Analysis Method - Procedure 3
DIVISION I-A 4.4-1996 Single Mode Spectral Analysis Method - Procedure 2 (Interim 1998)

Guangdong Provincial Standard of the People's Republic of China, How to analyze spectral analysis

DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry

Professional Standard - Chemical Industry, How to analyze spectral analysis

HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method
HG/T 2955-2008 Layouts for standards of molecular absorption spectrometric analysis
HG/T 2955-1989(1997) Rules for drafting molecular absorption spectrometry analysis standards

Professional Standard - Agriculture, How to analyze spectral analysis

SN/T 5566-2023 General Rules of Laser Micro Raman Spectroscopy Analysis Method

IEC - International Electrotechnical Commission, How to analyze spectral analysis

PAS 62129-2004 Calibration of optical spectrum analyzers (Edition 1.0;: 2006)

YU-JUS, How to analyze spectral analysis

JUS C.A1.360-1977 Methods for chemical analysis of zine and zine alloys. Determination of group of elements - spectrographic analysis

PL-PKN, How to analyze spectral analysis

PN H04155-09-1986 Chemical analysis of silica raw materials and refractory products Method spectrographic

Shaanxi Provincial Standard of the People's Republic of China, How to analyze spectral analysis

DB61/T 1161-2018 Natural Gas Composition Analysis Laser Raman Spectroscopy Marshal

国家能源局, How to analyze spectral analysis

SY/T 7433-2018 Composition analysis of natural gas using laser Raman spectroscopy

Indonesia Standards, How to analyze spectral analysis

SNI 13-4694-1998 Composition analysis of coal ash by atomic absorption spectrometry
SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers

GOSTR, How to analyze spectral analysis

GOST 9716.2-1979 Copper-zinc alloys. Method spectral analysis of metal standard spesimens with photoelectric registration of spectrum
GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
GOST 9717.3-2018 Copper. Method of spectral analysis by oxide standard specimens
GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum

North Atlantic Treaty Organization Standards Agency, How to analyze spectral analysis

STANAG 7017-1994 SPECTROMETRIC ANALYSIS OF AIRCRAFT ENGINE LUBRICANTS

Professional Standard - Aviation, How to analyze spectral analysis

HB 5219.11-1998 Chemical Analysis Methods of Magnesium Alloys - Determination of Nickel Content by Atomic Absorption Spectrometry
HB 5219.13-1998 Magnesium Alloy Chemical Analysis Methods Atomic Absorption Spectroscopic Analysis Determination of Zinc Content
HB 5219.20-1998 Methods of chemical analysis of magnesium alloys - Determination of silver content by atomic absorption spectrometry
HB 5219.3-1998 Methods of chemical analysis of magnesium alloys - Determination of copper content by atomic absorption spectrometry
HB 5219.8-1998 Methods of chemical analysis of magnesium alloys - Determination of manganese content by atomic absorption spectrometry
HB 5219.5-1998 Methods of chemical analysis of magnesium alloys - Determination of iron content by atomic absorption spectrometry

未注明发布机构, How to analyze spectral analysis

BS EN 14242:2023 Aluminium and aluminium alloys — Chemical analysis — Inductively coupled plasma optical emission spectrometric analysis

ES-UNE, How to analyze spectral analysis

UNE-EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis (Endorsed by Asociación Española de Normalización in April of 2023.)

VN-TCVN, How to analyze spectral analysis

TCVN 6061-2009 Beer.Determination of colour by spectrophotometric method

Group Standards of the People's Republic of China, How to analyze spectral analysis

T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
T/CSTM 00011E-2021 General rules for original position statistic distribution analysis by laser induced breakdown spectroscopy
T/CSTM 00011-2017 General Rules for In Situ Statistical Distribution Analysis Method of Laser Induced Breakdown Spectroscopy

AT-ON, How to analyze spectral analysis

ONORM M 6238 Teil.1-1986 Water analysis; determination ofnitrate; 2,6-dimethylphenol spectrometric method
ONORM M 6603-2-1997 Water analysis - Determination of potassium and sodium by flame emission spectrometry
ONORM M 6603-1-1997 Water analysis - Determination of potassium and sodium by atomic absorption spectrometry

Professional Standard - Forestry, How to analyze spectral analysis

LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

KR-KS, How to analyze spectral analysis

KS D 1658-2003(2016)(英文版) Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D ISO 14594-2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 22489-2018(2023) Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy

Professional Standard - Electricity, How to analyze spectral analysis

DL/T 991-2006 Spectral analysis guideline of metal for electrical power equipment

NL-NEN, How to analyze spectral analysis

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

SE-SIS, How to analyze spectral analysis

SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers

Professional Standard - Textile, How to analyze spectral analysis

FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers

Liaoning Provincial Standard of the People's Republic of China, How to analyze spectral analysis

DB21/T 2079-2013 Polyvinyl chloride (PVC) cable material analysis - infrared spectroscopy