ZH
RU
ES

What are the basic methods of testing

What are the basic methods of testing, Total:498 items.

In the international standard classification, What are the basic methods of testing involves: Construction materials, Television and radio broadcasting, Leather technology, Physics. Chemistry, Components for electrical equipment, Electromechanical components for electronic and telecommunications equipment, Soil quality. Pedology, Integrated circuits. Microelectronics, Galvanic cells and batteries, Wood, sawlogs and sawn timber, Wood-based panels, Fibre optic communications, Testing of metals, Installations in buildings, Quality, Metrology and measurement in general, Medical equipment, Protection against fire, Electrical engineering in general, Aerosol containers, Organic chemicals, Measurement of volume, mass, density, viscosity, Paint ingredients, Fluid power systems, Surface treatment and coating, Ceramics, Environmental testing, Industrial automation systems, Air quality, Petroleum, petroleum products and natural gas handling equipment, Electronic components in general, Products of the textile industry, Protection of and in buildings, Adhesives, Pipeline components and pipelines, Mining and quarrying, Plastics, Telecommunication systems, Analytical chemistry, Paints and varnishes, Water quality, Materials and articles in contact with foodstuffs, General methods of tests and analysis for food products, Inorganic chemicals, Technical drawings, Refractories, Electrical and electronic testing, Electromagnetic compatibility (EMC), Non-textile floor coverings, Wastes, Safety of machinery, Vocabularies, Telecommunications in general, Textile fibres, Road vehicle systems, Lubricants, industrial oils and related products, Raw materials for rubber and plastics, Dentistry, Optoelectronics. Laser equipment, Telecommunication services. Applications, Accident and disaster control, Pumps, On-board equipment and instruments, Radiocommunications.

FI-SFS, What are the basic methods of testing

• SFS 2866-1980

AENOR, What are the basic methods of testing

• UNE 33101-1:1973 TEST METHOD OF VINIC VINEGAR. DETERMINATION OF THE FUNDAMENTAL COMPONENTS.
• UNE 20606-6:1986 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CLIMATIC TESTS AND SOLDERING TESTS
• UNE-IEC 60512-9:2005 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
• UNE-EN 60512-1-4:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 1: General -- Section 4: Test 1d: Contact protection effectiveness (scoop-proof).
• UNE-EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
• UNE-EN 60512-16-20:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20: TEST 16T: MECHANICAL STRENGHT (WIRED TERMINATION OF SOLDERLESS CONNECTIONS).
• UNE 20606-8/2C:1983 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TEST (MECHANICAL) AND MECHANICAL TEST ON CONTACTS AND TERMINATIONS
• UNE 20606-8:1981 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TESTS (MECHANICAL) AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
• UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
• UNE-EN 60512-20-2:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 20-2: Test 20b - Flammability tests - Fireproofness.
• UNE 20606-8/1C:1982 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR (MECHANICAL) TESTS AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
• UNE-EN 60512-14-7:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 14: SEALING TESTS. SECTION 7: TEST 14G: IMPACTING WATER
• UNE-EN ISO 15752:2010 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010)
• UNE-EN 13329:2016+A1:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• UNE-EN 60512-11-8:2000 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 8: TEST 11H. SAND AND DUST.
• UNE-EN 60512-11-1:2000 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 1: TEST 11A. CLIMATIC SEQUENCE.
• UNE-EN 60512-19-3:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 19: CHEMICAL RESISTANCE TESTS. SECTION 3: TEST 19C. FLUID RESISTANCE
• UNE-EN 60512-6-5:2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Random vibration.
• UNE-EN 60512-23-3:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories.
• UNE-IEC 60512-7:2005 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
• UNE-EN 60512-1-3:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH
• UNE-EN 60512-12-6:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12: SOLDERING TESTS. SECTION 6: TEST 12F: SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING.
• UNE-EN 60512-15-8:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8: TEST 15H. CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION.
• UNE-EN ISO 15367-1:2004 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003)

SE-SIS, What are the basic methods of testing

• SIS SS CECC 00009-1981 Basic specification: Basic testing procedures and measuring methods for electromechanical components

Standard Association of Australia （SAA）, What are the basic methods of testing

• AS 1141.2:1999 Methods for sampling and testing aggregates - Basic testing equipment
• AS 3726.0:1995 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods Part 0: Introduction and list of Parts of AS 3726 and IEC 512
• AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks

CZ-CSN, What are the basic methods of testing

• CSN 36 6150-1987 Telegraph apparatus wiih 5 element code. Basic parameters, lechnica! requirements and lesting methods
• CSN 65 9710-1989 Organic pigments. Testing methods of pigment preparations on the basis of vinyl polymers and nitrocellulose
• CSN 47 0176-1-1992 Agricultural and forestry machines and tractors. Methods of noise measurement at the operator's position. Part 1: Ba-sic measurements
• CSN IEC 512-8:1994 Electromechanical components for electronic equipment, basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations

RU-GOST R, What are the basic methods of testing

• GOST R 52023-2003 Distribution networks of cable TV systems. Basic parameters. Technical requirements. Measurement and test methods
• GOST 28381-1989 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods
• GOST R 50414-1992 Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, general parametres, technical requirements and test methods
• GOST R 51340-1999 Safety of machinery. Basic characteristic of visual and auditory danger signals. Technical requirements and methods for testing
• GOST 11216-1983 Distribution networks of receiving TV and radio systems. Basic parameters, technical requirements, measurement and test methods
• GOST R 50987-1996 Hydraulically operated portable emergency and rescue tools. Muscular operated pump unit. Basic parameters and dimensions. Methods of testing
• GOST 14662-1983 Telegraph radio communication channel transmit-receive equipment. Main parameters, general technical requirements and methods of measurement of transmit-receive channel

British Standards Institution (BSI), What are the basic methods of testing

• PD IEC/TR 62349:2014 Guidance of measurement methods and test procedures. Basic tests for polarization-maintaining optical fibres
• BS PD IEC/TR 62349:2014 Guidance of measurement methods and test procedures. Basic tests for polarization-maintaining optical fibres
• BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
• BS EN ISO 15004-1:2020 Ophthalmic instruments. Fundamental requirements and test methods. General requirements applicable to all ophthalmic instruments
• BS EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 16t. Mechanical strength (wired termination of solderless connections)
• BS EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - General requirements applicable to all ophthalmic instruments
• BS EN 60512-14-7:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water
• BS ISO 23840:2021 Water hydraulics. Water-hydraulic pumps. Methods of testing and representing basic steady-state performance
• BS EN ISO 14720-1:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Infrared measurement methods
• BS EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
• BS CECC 00009:1982 Harmonized system of quality assessment for electronic components - Basic specification: basic testing procedures and measuring methods for electromechanical components
• BS EN 60512-11-8:1999 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11h. Sand and dust
• 19/30351471 DC BS EN ISO 15004-1. Ophthalmic instruments. Fundamental requirements and test methods. Part 1. General requirements applicable to all ophthalmic instruments
• BS EN 61290-6-1:1998 Optical fibre amplifiers. Basic specification. Test methods for pump leakage parameters. Optical demultiplexer
• 21/30391474 DC BS ISO 23840. Water hydraulics. Water-hydraulic pumps. Methods of testing and representing basic steady-state performance
• BS EN 60512-1-4:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. Test 1d. Contact protection effectiveness (scoop-proof)
• BS ISO 9370:2017 Tracked Changes. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
• 20/30414092 DC BS EN IEC 60794-1-403. Optical Fibre Cables. Basic optical cable test procedures. Part 403. Electrical test methods. Electrical continuity test of cable metallic elements, method H3
• BS EN 60512-20-2:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Test 20b. Flammability tests. Fireproofness. Section 2: Test 20b - Fireproofness
• BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
• BS EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Climatic tests - Test 11a - Climatic sequence
• BS 7755-3.3:1995 Soil quality. Chemical methods. Determination of effective cation exchange capacity and base saturation level using barium chloride solution
• BS ISO 9370:1997 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
• BS EN IEC 60794-1-309:2023 Optical fibre cables - Generic specification. Basic optical cable test procedures. Cable element test methods. Bleeding and evaporation of filling or flooding compounds, Method G9
• BS EN 60512-12-7:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12g. Solderability, wetting balance method. Section 7: Test 12g: Solderability, wetting balance method
• BS EN 17142:2018 Modular multilayer floor coverings. Elements with a wood powder based surface layer. Specifications, requirements and test methods
• BS EN 60512-12-6:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12f. Sealing against flux and cleaning solvents in machine soldering
• 22/30466118 DC BS EN IEC 60794-1-218. Optical fibre cables - Part 1-218. Generic specification. Basic optical cable test procedures. Environmental test methods. Mid-span temperature cycling test for exposed optical units, Method F18
• 20/30425764 DC BS EN IEC 62496-2-61. Optical circuit boards. Basic test and measurement procedures. Part 2-61. Test methods. Flexibility for flexible optic-electric circuits
• 21/30438013 DC BS EN 60794-1-311. Optical fibre cables. Part 1-311. Generic specification. Basic optical cable test procedures. Cable element test methods. Tensile strength and elongation test for cable elements, Method G11A
• 15/30288027 DC BS ISO 19044. Test methods for fibre-reinforced cementitious composites. Load-displacement curve using notched specimen
• PD ISO/TS 13396:2021 Road vehicles. Sled test method to enable the evaluation of side impact protection of child restraint systems. Essential parameters
• 20/30415609 DC BS EN 13329 AMD2. Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods
• BS EN 60512-23-3:2001 Connectors for electronic equipment - Tests and measurements - Test 23c - Shielding effectiveness of connectors and accessories
• BS EN 61300-3-27:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Measurement method for the hole location of a multiway connector plug. Section 27: Measurement method for the hole locatio...
• BS EN 60512-15-8:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 15h. Contact retention system resistance to tool application
• PD IEC TS 62736:2023 Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system's elementary performance
• 22/30457569 DC BS EN IEC 60794-1-212. Optical fibre cables - Part 1-212. Generic specification. Basic optical cable test procedures. Environmental test methods. Temperature cycling with cable elements fixed at both ends, Method F12
• 19/30398797 DC BS EN IEC 60794-1-211. Optical fibre cables. Part 1-211. Generic specification. Basic optical cable test procedures. Environmental test methods. Sheath shrinkage (cables intended for patch cords), Method F11
• 21/30447637 DC BS EN IEC 60794-1-212. Optical fibre cables. Part 1-212. Generic specification. Basic optical cable test procedures. Environmental test methods. Temperature cycling with cable elements fixed at both ends, Method F12
• BS ISO 14572:2011 Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables
• DD ISO/TS 11080:2009 Dentistry. Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water
• BS EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
• BS EN IEC 61300-3-53:2021 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including f
• 21/30439454 DC BS EN IEC 60794-1-309. Optical fibre cables. Part 1-309. Generic specification. Basic optical cable test procedures. Cable element test methods. Bleeding and evaporation of filling or flooding compounds, Method G9
• BS 7079-B10:2000 Preparation of steel substrates before application of paints and related products - Methods for the assessment of surface cleanliness - Field method for the titrimetric determination of water-soluble chloride

Association Francaise de Normalisation, What are the basic methods of testing

• NF C20-415:1983 Test Methods Basic Environmental Testing Procedures Guidance on the Application of the Basic Environmental Testing Procedures to Simulate the Effects of Storage
• NF S12-300-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1 : general requirements applicable to all ophthalmic instruments.
• NF S12-300-1*NF EN ISO 15004-1:2020 Ophthalmic instruments - Fundamental requirements and test methods - Part 1 : general requirements applicable to all ophthalmic instruments
• NF EN ISO 15004-1:2020 Instruments ophtalmiques - Exigences fondamentales et méthodes d'essai - Partie 1 : exigences générales applicables à tous les instruments ophtalmiques
• NF C20-453:1985 Basic environmental testing procedures. Test methods. Conventional determination of corrosiveness of smoke.
• NF X06-038*NF ISO 17258:2015 Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations
• NF EN 62878-1-1:2015 Substrat avec appareil(s) intégré(s) - Partie 1-1 : spécification générique - Méthode d'essai
• NF C20-419:1981 Test Methods Basic Environmental Testing Procedures Guide for Climatic Composite Test Background Information
• NF EN 60512-1-4:1998 Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 1 : généralités. Section 4 : essai 1d : efficacité de la protection des contacts (scoop-proof)
• NF EN IEC 60794-1-308:2023 Câbles à fibres optiques - Partie 1-308 : spécification générique - Procédures fondamentales d'essais des câbles optiques - Méthodes d'essai des éléments de câbles - Essai de torsion résiduelle du ruban, méthode G8
• NF EN 60512-16-20:1997 Composants électromécaniques pour équipements électroniques. Procédures d'essai de base et méthodes de mesure - Partie 16 : essais mécaniques des contacts et des sorties. Section 20 : essai 16t : tenue mécanique (sortie câblée de connexions ...
• NF C20-540:1990 ENVIRONMENTAL TESTING. TEST METHODS. CLIMATIC AGEING TEST OF EQUIPMENT AND SYNTHETIC MATERIALS FOR OUTDOOR USE.
• NF EN IEC 60794-1-215:2020 Câbles à fibres optiques - Partie 1-215 : spécification générique - Procédures fondamentales d'essais des câbles optiques - Méthodes d'essais d'environnement - Essai de résistance au gel en extérieur des câbles, méthode F15
• NF B10-631*NF EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
• NF EN 14146:2004 Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité dynamique (par la mesure de la fréquence de résonance fondamentale)
• NF B40-675-1*NF EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1 : infrared measurement methods
• NF EN 61300-3-17:2000 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-17 : examens et mesures - Angle de la face terminale des embouts polis angulairement
• NF EN IEC 60794-1-403:2021 Câbles à fibres optiques - Partie 1-403 : spécification générique - Procédures fondamentales d'essais des câbles optiques - Méthodes d'essais électriques - Essai de continuité électrique des éléments métalliques des câbles, méthode H3
• NF EN 61300-2-21:2010 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-21 : essais - Essai cyclique composite température/humidité
• E90-350-13:1994 Methods for the calibration of vibration and shock pick-ups. Part 13 : testing of base strain sensitivity.
• NF E90-350-13:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 13 : essai de sensibilité de contrainte de base.
• NF EN ISO 16654/A2:2023 Microbiologie des aliments - Méthode horizontale pour la recherche des Escherichia coli O157 - Amendement 2 : inclusion d'essais de performance de tous les milieux de culture et réactifs
• NF B54-020/IN1*NF EN 13329/IN1:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• NF EN 60512-14-7:1998 Composants électromécaniques pour équipements électroniques. Procédures d'essai de base et méthodes de mesure - Partie 14 : essais d'étanchéité. Section 7 : essai 14 g : projection d'eau.
• NF EN 14978/IN1:2021 Revêtements de sol stratifiés - Eléments à parement à base acrylique traités par des faisceaux d'électrons - Spécifications, exigences et méthodes d'essai
• NF EN 14978+A1:2021 Revêtements de sol stratifiés - Eléments à parement à base acrylique traités par des faisceaux d'électrons - Spécifications, exigences et méthodes d'essai
• NF EN ISO 15752:2010 Instruments ophtalmiques - Sondes endolumineuses - Exigences fondamentales et méthodes d'essai relatives à la sécurité vis-à-vis des rayonnements optiques
• NF EN 61300-2-39:1997 Dispositifs d'interconnexion et composants passifs à fibres optiques. Méthodes fondamentales d'essais et de mesures - Partie 2-39 : essais. Sensibilité aux champs magnétiques externes.
• NF P62-405*NF EN 17142:2018 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods
• NF EN 61290-2-3:1998 Amplificateurs à fibres optiques - Spécification de base - Partie 2-3 : méthodes d'essai pour les paramètres de puissance optique. Mesureur de puissance optique.
• NF EN 61300-2-38:2007 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-38 : essais - Étanchéité pour les boîtiers à fibres optiques à surpression interne
• NF EN 61300-3-36:2000 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-36 : examens et mesures - Méthodes de mesure des diamètres intérieurs et extérieurs des embouts de connecteurs pour ...
• NF EN 61290-6-1:1998 Amplificateurs à fibres optiques - Spécification de base - Partie 6-1 : méthodes d'essai pour les paramètres de fuite de pompe. Démultiplexeur optique.
• NF EN ISO 7784-3:2022 Peintures et vernis - Détermination de la résistance à l'abrasion - Partie 3 : méthode utilisant une roue revêtue de papier abrasif et une éprouvette animée d'un mouvement de va-et-vient linéaire
• NF EN 61300-2-23:2011 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-23 : essais - Étanchéité pour les boîtiers non pressurisés de dispositifs à fibres optiques
• NF C93-400-20-2*NF EN 60512-20-2:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2 : test 20b - Flammability tests - Fireproofness.
• NF EN 61300-3-27:1997 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-27 : examens et mesures. Méthode de mesure pour la localisation du trou sur une fiche de connecteur multivoies.
• NF EN 61300-3-20:2004 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-20 : examens et mesures - Directivité des dispositifs de couplage pour fibres optiques
• NF EN 61300-2-15:2008 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-15 : essais - Robustesse du mécanisme de verrouillage aux efforts de torsion
• NF B54-021*NF EN 14978+A1:2021 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• NF EN 61300-2-41:1998 Dispositifs d'interconnexion et composants passifs à fibres optiques. Méthodes fondamentales d'essais et de mesures - Partie 2-41 : essais. Essais de sélection concernant l'affaiblissement des connecteurs à fibres optiques unimodales non angulai...
• NF EN ISO 15367-1:2004 Lasers et équipements associés aux lasers - Méthodes d'essai pour la détermination de la forme du front d'onde du faisceau laser - Partie 1 : terminologie et aspects fondamentaux
• NF EN 61300-2-51:2007 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-51 : essais - Essai des connecteurs à fibres optiques en transmission lorsqu'une charge de traction est appliquée - U...
• NF EN 61300-2-50:2007 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-50 : essais - Essai de résistance des connecteurs à fibres optiques sous charge statique - Unimodal et multimodal
• NF EN 61300-3-46:2011 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-46 : mesure - Diamètre d'alésage pour broche de guidage dans les férules MT
• NF ISO 4409:2019 Transmissions hydrauliques - Pompes, moteurs et variateurs volumétriques - Méthodes d'essai et de présentation des données de base du fonctionnement en régime permanent
• NF EN 61300-3-26:2003 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-26 : examens et mesures - Mesure de l'erreur d'alignement angulaire des embouts avec fibre
• NF EN 61300-3-13:1998 Dispositifs d'interconnexion et composants passifs - Méthodes fondamentales d'essais et de mesures - Partie 3-13 : examens et mesures. Stabilité de contrôle d'un interrupteur pour fibres optiques
• NF T35-507-3:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 3 : determination of hardness.
• NF EN 61300-3-31:2003 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-31 : examens et mesures - Mesure du rapport de puissance de couplaée pour les sources à fibres optiques
• NF S10-127-1*NF EN ISO 15367-1:2004 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1 : terminology and fundamental aspects
• NF EN 61300-3-37:2005 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-37 : examens et mesures - Angle d'extrémité des fibres optiques à polissage d'angle
• NF EN 60512-15-8:1997 Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 15 : essais mécaniques des contacts et des sorties. Section 8 : essai 15h : résistance du système de rétention des contac...
• NF EN 61300-2-40:2001 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-40 : essais - Tri par mesure de l'affaiblissement des connecteurs pour fibres optiques monomodales angulaires de type a...
• NF EN 60512-12-6:1997 Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 12 : essais de soudure. Section 6 : essai 12f : étanchéité aux flux et solvants de nettoyage dans une machine à souder.
• NF T35-507-4:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 4 : determination of apparent density.
• NF EN 61300-3-16:2004 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-16 : examens et mesures - Rayon de la face terminale des ferrules polies sphériquement
• NF E48-380*NF ISO 4409:2019 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
• NF C93-400-23-3:2001 Electromechanical components for elctronic equipment - Basic testing procedures and measuring methods - Part 23-3 : test 23c : shielding effectiveness of connectors and accessories.
• NF C93-471-7:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 7 : TEST 11G : FLOWING MIXED GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-7).
• NF EN 61300-2-33:2015 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-33 : essais - Montage et démontage des épissures mécaniques de fibres optiques, des systèmes de gestion des fibres e...

American Society for Testing and Materials (ASTM), What are the basic methods of testing

• ASTM D3913-93(1998) Standard Test Method for Acidity in Basic Chromium Tanning Liquors
• ASTM E2866-12 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid
• ASTM E1720-01(2008) Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO₂ Production Test
• ASTM D1166-84(1995)e1 Standard Test Method for Methoxyl Groups in Wood and Related Materials
• ASTM D1166-84(2007) Standard Test Method for Methoxyl Groups in Wood and Related Materials
• ASTM D6019-96(2006) Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
• ASTM D6019-96 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
• ASTM D6019-96(2001) Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
• ASTM D601-87(1998) Test Method for Determination of Chromium Oxide in Basic Chrome Tanning Solvents
• ASTM D6633-01 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
• ASTM E258-07 Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
• ASTM D2106-07(2012) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
• ASTM D5179-02 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
• ASTM D5179-98 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
• ASTM D5179-02(2008) Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
• ASTM D3003-01(2016) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
• ASTM D6019-10 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
• ASTM D1400-00 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
• ASTM C747-93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
• ASTM D8361-20 Standard Test Method for Total Organic Carbon in Water by Two Stage Wet Chemical Catalyzed Hydroxyl Radical Oxidation with Infra-Red Detection of Resulting Carbon Dioxide
• ASTM E440-72(1983)e1 Test Method for Traces of Peroxides in Organic Solvents with N, N=+ -Diphenyl-P-Phenylenediamine
• ASTM D7419-13 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
• ASTM D5376-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
• ASTM D5376-06 Standard Test Method for Rubber Compounding Materials8212;Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
• ASTM D7419-07 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
• ASTM D7363-07 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monito

Korean Agency for Technology and Standards (KATS), What are the basic methods of testing

• KS C IEC 62860-1:2018 Test methods for the Characterization of Organic Transistor-Based Ring Oscillators
• KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
• KS P ISO 15004-1:2018 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
• KS A ISO 5725-2:2012 Accuracy(trueness and precision) of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
• KS B 6939-2006(2016) Test methods of measuring the mobile performance of service robot－Part 1：Determination of basic specification
• KS B 6939-2021 Test methods of measuring the mobile performance of service robot — Part 1：Determination of basic specification
• KS M ISO 7387-1:2002 Adhesives with solvents for assembly of PVC－U pipe elements－Characterization－Part 1：Basic test methods
• KS M ISO 1388-3:2002 Ethanol for industrial use－Methods of test－Part 3：Estimation of content of carbonyl compoundspresent in small amounts－Photometric method
• KS M ISO 1388-3:2017 Ethanol for industrial use — Methods of test — Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method
• KS C IEC 60512-1-4-2002(2013) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 1：General－Section 4：Test 1d：Contact protection effectiveness(scoop－proof)
• KS C IEC 60512-16-20-2005(2010) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 16：Mechanical tests on contacts and terminations－Section 20：Test 16t：Mechanical strength(wired
• KS R ISO 4141-1:2020 Road vehicles — Multi-core connecting cables —Part 1: Test methods and requirements for basic performance sheathed cables
• KS B ISO 15367-1:2019 Lasers and laser-related equipment－Test methods for determination of the shape of a laser beam wavefront－Part 1：Terminology and fundamental aspects
• KS M ISO 11125-6-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 6：Determination of foreign matter
• KS M ISO 11125-7-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 7：Determination of moisture
• KS C IEC 60512-19-3-2004(2009) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 19：Chemical resistance tests－Section 3：Test 19c－Fluid resistance
• KS M ISO 11125-2-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 2 : Determination of particle size distribution
• KS M ISO 11127-2-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 2：Determination of particle size distribution
• KS M ISO 11127-3-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 3：Determination of apparent density
• KS C IEC 61094-3A:2017 Electroacoustics — Measurement microphone — Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
• KS C IEC 60512-23-3-2004(2009) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 23－3：Test 23c：Shielding effectiveness of connectors and accessories
• KS C IEC 60512-8-2004(2009) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 8：Conenctor tests(mechanical) and mechanical tests on contacts and terminations

KR-KS, What are the basic methods of testing

• KS C IEC 62860-1-2018 Test methods for the Characterization of Organic Transistor-Based Ring Oscillators
• KS P ISO 15004-1-2018 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
• KS R ISO 4141-1-2020 Road vehicles — Multi-core connecting cables —Part 1: Test methods and requirements for basic performance sheathed cables
• KS B ISO 15367-1-2019 Lasers and laser-related equipment－Test methods for determination of the shape of a laser beam wavefront－Part 1：Terminology and fundamental aspects
• KS C IEC 61094-3A-2017 Electroacoustics — Measurement microphone — Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique

BELST, What are the basic methods of testing

• STB 1662-2006 Distribution networks of cable TV systems. Basic parameters, technical requirements, measurement and test methods
• STB 2524-2018 Telecommunications facilities of multiservice networks. Ethernet electrical interfaces. Requirements to base parameters and test methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., What are the basic methods of testing

• ASHRAE 94.3-1986 Method of Testing Active Sensible Thermal Energy Storage Devices Based on Thermal Performance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What are the basic methods of testing

• GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
• GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
• GB/T 14029-1992 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
• GB 14029-1992 Basic principles of semiconductor integrated circuit analog multiplier testing methods
• GB/T 14028-1992 General principles of measuring methods of analogue switches for semiconductor integrated circuits
• GB 14028-2018 Basic principles of semiconductor integrated circuit analog switch test methods
• GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
• GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
• GB/T 14031-1992 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
• GB/T 14032-1992 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
• GB 14031-1992 Basic principles of semiconductor integrated circuit analog phase-locked loop testing methods
• GB 14032-1992 Basic principles of digital phase-locked loop testing methods for semiconductor integrated circuits
• GB/T 15136-1994 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
• GB/T 6324.5-2008 Test method of organic chemical products.Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals
• GB/T 14115-1993 General principles of measuring methods of Sample/Hold amplifiers for semiconductor integrated circuits
• GB 3442-1986 Basic principles of semiconductor integrated circuit operational (voltage) amplifier testing methods
• GB/T 6800-1986 General principles of measuring methods of audio power amplifiers for semiconductor audio integrated circuits
• GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
• GB/T 12843-1991 General principle of measuring methods of microprocessors and peripheral interface circuits' parameters for semiconductor integrated circuits
• GB 12843-1991 Basic principles of electrical parameter testing methods for semiconductor integrated circuit microprocessors and peripheral interface circuits
• GB/T 5095.8-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations

European Telecommunications Standards Institute (ETSI), What are the basic methods of testing

• ETSI EG 203 130-2013 Methods for Testing and Specification (MTS); Model-Based Testing (MBT); Methodology for standardized test specification development (V1.1.1)
• ETSI TR 102 840-2011 Methods for Testing and Specifications (MTS); Model-based testing in standardisation (V1.2.1)
• ETSI TR 103 168-2011 Methods for Testing and Specifications (MTS); Application of Model-Based Testing in the Telecoms Domain (V1.1.1)
• ETSI ES 202 951-2011 Methods for Testing and Specification (MTS); Model-Based Testing (MBT); Requirements for Modelling Notations (V1.1.1)
• ETSI TR 103 133-2013 Methods for Testing and Specification (MTS); Model-Based Testing (MBT); Application of MBT in ETSI case studies (V1.1.1; Includes Diskette)
• ETSI ES 202 786-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Support of interfaces with continuous signals (V1.3.1)

PL-PKN, What are the basic methods of testing

• PN A55543-1991 Stuffing mixers. Basic parameters, requirements and testing methods
• PN T05124-1986 Electromechanical components for electronic equipment; basie testing procedures and measuring methods Dynamie stress tests
• PN T05123-1986 Electromechanical components for electronic e?uipment; basie testing procedures and measuring methods Current-carrying capacity tests
• PN T05126-1987 Eicctromechanical components for elctronic equipment; basie testing procedures and mcasuring methods Climatic tests and solderini: tests
• PN-EN ISO 15004-1-2021-05 E Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
• PN-EN 14978-2016-05 D Laminate floor coverings -- Elements with acrylic based surface layer, electron beam cured -- Specifications, requirements and test methods
• PN T05128-1988 Electromechanical components tor electronic e?uipment; basie testing procedures and measuring methods Connector tests (mechanical) and mechanical tests on contacts and terminations

工业和信息化部, What are the basic methods of testing

• SJ/T 10171-2016 General test method for basic properties of alkaline battery separators

European Committee for Standardization (CEN), What are the basic methods of testing

• CWA 17793-2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
• CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
• EN ISO 15004-1:2020 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
• EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
• EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
• EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
• EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)

American National Standards Institute （ANSI), What are the basic methods of testing

• ANSI/ASHRAE 94.3-2010 Method of Testing Active Sensible Thermal Energy Devices Based on Thermal Performance
• ANSI/ASA S2.31-1979 Methods for the Experimental Determination of Mechanical Mobility, Part 1: Basic Definitions and Transducers
• ANSI/TIA/EIA 455-222-2001 Optical Fiber Amplifiers - Basic Specification - Part 3: Test Methods for Noise Figure Parameters
• ANSI/TIA/EIA 455-221-2001 Optical Fiber Amplifiers - Basic Specification - Part 5 -1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer

US-CFR-file, What are the basic methods of testing

• CFR 40-63.144-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories. Section63.144:Process wastewater provisions—test methods and procedures for determining applicability and Group 1/Group 2 determinations (det
• CFR 12-3.173-2014 Banks and Banking. Part3:Capital adequacy standards. SubpartE:Risk-weighted assets-internal ratings-based and advanced measurement approaches. Section3.173:Disclosures by certain advanced approaches national banks and Federal savings associations.

CEN - European Committee for Standardization, What are the basic methods of testing

• EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
• EN 17142:2018 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications@ requirements and test methods
• PREN 17142-2017 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications@ requirements and test methods

International Organization for Standardization (ISO), What are the basic methods of testing

• ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
• ISO 15004-1:2020 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
• ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
• ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
• ISO 7387-1:1983 Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test methods
• ISO 9370:2009 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
• ISO 9370:2017 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
• ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
• ISO 5725-2:1994/cor 1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method; Technical Corrigendum 1
• ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
• ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
• ISO/TR 9122-2:1990 Toxicity testing of fire effluents; part 2: guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology)
• ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
• ISO 4409:2007 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
• ISO 4409:2019 Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance

Professional Standard - Electron, What are the basic methods of testing

• SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
• SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
• SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
• SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
• SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
• SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
• SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
• SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
• SJ 20961-2006 General principles of measuring methods of A/D and D/A converters for integrated circuits
• SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
• SJ/T 10739-1996 Semiconductor integrated circuits - General principles of measuring methods for MOS random access memories
• SJ/T 10738-1996 Semiconductor integrated circuits - General principles of measuring methods for operational (voltage) amplifiers
• SJ/T 10800-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for sense amplifiers
• SJ/T 10802-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for peripheral drivers
• SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators
• SJ/T 10804-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods for level translator
• SJ/T 10806-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for display drivers
• SJ/T 11005-1996 Semiconductor TV integrated circuits - General principles of measuring methods for audio channel circuits
• SJ/T 11006-1996 Semiconductor TV integrated circuits - General principles of measuring methods for horizontal and vertical sweep circuits
• SJ/T 10401-1993 General principles of measuring methods for motor speed stablizers of semiconductor audio integrated circuits
• SJ/T 10740-1996 Semiconductor integrated circuits - General principles of measuring methods for bipolar random access memories
• SJ 2480-1984 General principles of static measurement for D/A converters for hybrid integrated circuits
• SJ/T 10402-1993 General principles of measuring methods for automatic music selectors of semiconductor audio integrated circuits
• SJ/T 10400-1993 General principles of measuring methods for graphic equalizers of semiconductor audio integrated circuits
• SJ/T 11004-1996 Semiconductor TV integrated circuits - General principles of measuring methods for picture channel circuits
• SJ/T 10880-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
• SJ 2481-1984 General principles of static measurement for A/D converters for hybrid integrated circuits
• SJ/T 10879-1996 Semiconductor integrated audio circuits - General principles of measuring methods for audio preamplifiers
• SJ/T 10427.1-1993 Grneral Principles of measuring methods of FM converter for semiconductor audio integrated circuits
• SJ/T 10427.2-1993 General principles of measuring methods of intermediate-frequency amplifier for semiconductor audio integrated circuits
• SJ/T 10881-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
• SJ/T 10801-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for magnetic memory drivers
• SJ/T 11007-1996 Semiconductor TV integrated circuits - General principles of measuring methods for video signal and chrominance signal processing circuits
• SJ/T 10818-1996 Semiconductor integrated circuits - General principles of measuring methods for D/A and A/D converters of non-linear circuits

Danish Standards Foundation, What are the basic methods of testing

• DS/EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
• DS/EN 60512-1-4/Corr.:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
• DS/EN 60512-1-4:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
• DS/EN ISO 15004-1:2020 Ophthalmic instruments – Fundamental requirements and test methods – Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
• DS/EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20, Test 16t: Mechanical strength (wired termination of solderless connections)
• DS/EN ISO 15752:2010 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety
• DS/EN IEC 60794-1-403:2021 Optical fibre cables – Part 1-403: Generic specification – Basic optical cable test procedures – Electrical test methods – Electrical continuity test of cable metallic elements, method H3
• DS/ISO 15004-1:2020 Ophthalmic instruments – Fundamental requirements and test methods – Part 1: General requirements applicable to all ophthalmic instruments
• DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
• DS/EN 60512-20-2:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness
• DS/EN 60512-11-8:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11 h: Sand and dust
• DS/EN 60512-14-7:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water
• DS/EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence
• DS/EN 13329+A1:2009 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• DS/EN 13329:2021 Laminate floor coverings – Elements with a surface layer based on aminoplastic thermosetting resins – Specifications, requirements and test methods
• DS/IEC 512-8:1995 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
• DS/EN 60512-19-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance
• DS/EN 60512-6-5:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration
• DS/EN 60512-23-3/Corr.1:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
• DS/EN 60512-23-3:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
• DS/IEC 512-7:1995 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
• DS/EN 61290-6-1:1999 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
• DS/EN 61000-4-24:1998 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
• DS/EN 60512-1-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c: Electrical engagement length
• DS/EN 14978:2006 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• DS/EN 14978:2021 Laminate floor coverings – Elements with acrylic based surface layer, electron beam cured – Specifications, requirements and test methods
• DS/EN ISO 15367-1:2004 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects
• DS/EN 60512-12-6:1996 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering
• DS/IEC 512-8:1986 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations with Amendment No.1(1985)
• DS/EN 60512-15-8:1996 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations. Section 8: Test 15h: Contact retention system resistance to tool application

IT-UNI, What are the basic methods of testing

• UNI EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
• UNI EN 13329-2021 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• UNI EN 14978-2021 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• UNI ISO 4409:2020 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance

ES-UNE, What are the basic methods of testing

• UNE-EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
• UNE-ISO 17258:2017 Statistical methods -- Six Sigma -- Basic criteria underlying benchmarking for Six Sigma in organizations
• UNE-EN IEC 60794-1-403:2021 Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3 (Endorsed by Asociación Española de Normalización in July of ...
• UNE-EN 13329:2016+A2:2022 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• UNE-EN 17142:2019 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods
• UNE-EN 61290-6-1:1998 OPTICAL FIBRE AMPLIFIERS. BASIC SPECIFICATION. PART 6-1: TEST METHODS FOR PUMP LEAKAGE PARAMETERS. OPTICAL DEMULTIPLEXER (Endorsed by AENOR in November of 1998.)
• UNE-EN 14978:2016+A1:2021 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods (Endorsed by Asociación Española de Normalización in November of 2021.)
• UNE-EN IEC 63005-2:2020 Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating the performance of basic functions (Endorsed by Asociación Española de Normalización in April of 2020.)
• UNE-EN IEC 61300-3-53:2021/AC:2023-07:2023 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveg...

Japanese Industrial Standards Committee (JISC), What are the basic methods of testing

• JIS T 15004-1:2022 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments
• JIS K 7363:1999 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
• JIS T 15004-1:2013 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments
• JIS K 6404-2:2015 Testing methods for rubber- or plastics-coated fabrics -- Part 2: Determination of basic physical properties
• JIS K 5601-5-2:2008 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 2: Water-based paints (Multiple standard addition method)
• JIS K 6404-1:2015 Testing methods for rubber- or plastics-coated fabrics -- Part 1: Basic characteristics (Standard atmospheres for conditioning and testing, and determination of roll characteristics)
• JIS C 5402-23-3:2005 Electromechanical components for electronic equipment -- Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

International Electrotechnical Commission (IEC), What are the basic methods of testing

• IEC TR 62349:2014 Guidance of measurement methods and test procedures - Basic tests for polarization-maintaining optical fibres
• IEC 60512-23-3:2000/COR1:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
• IEC 60512-8:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 8: connector tests (mechanical) and mechanical tests on contacts and terminations

RO-ASRO, What are the basic methods of testing

• STAS 12743/4-1989 Electromechanical components for electric equipment. Basic testing procedures and measuring methods. Gynamic stress tests
• STAS 12743/3-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Current-carrying capacity tests
• STAS 12743/1-1991 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General
• STAS 12743/6-1989 Electronical components tor electronic equipments PROCEDURES FOR BASIC TESTS AND MEASURING METHODS Climatical and welding tests
• STAS 12743/7-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Mechanical operating tests and sealing tests
• STAS 12743/5-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Impact tests, static load tests, endu- rance tests and overload tests
• STAS 12743/9-1991 Electromechanical components for electronic equipment; BASIC TESTING PROCEDURES AND MEASURING METHODS Cable-clamping tests, explosion hazard tests, chemical resistance tests, fire hazard tests, r.f. rezistance tests,
• STAS 8393/17-1-1970 Basic environmental testing procedures for electronic components and electronic equipment DROP AND TOPPLE Testing methods
• STAS 12743/2-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS General examination, electrical continuity and contact resistance tests insulation tests and voltage stress tests

Institute of Electrical and Electronics Engineers (IEEE), What are the basic methods of testing

• IEEE Std 1620.1-2006 IEEE Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators
• IEC 62860-1:2013(E) IEEE Std. 1620.1-2006 IEC/IEEE Test methods for the characterization of organic transistor-based ring oscillators
• IEEE Std P1620.1/D8, Jul 2005 IEEE Draft Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators
• IEEE Std P1620.1/D8 Unapproved IEEE Draft Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators (Superseded by Approved IEEE Draft)

German Institute for Standardization, What are the basic methods of testing

• DIN-Fachbericht 143:2005 Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods
• DIN EN 60512-1-4 Berichtigung 1:2012-07 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997); German version EN 60512-1-4:1997, Corrig...
• DIN 96298-2:2016 Medical instruments - Terms, measuring methods and tests - Part 2: Measuring methods for the determination of basic measurements of surgical standard instruments
• DIN EN ISO 15004-1:2021-05 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020); German version EN ISO 15004-1:2020 / Note: DIN EN ISO 15004-1 (2009-07) remains valid alongsi...
• DIN EN ISO 14362-3:2017 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO 14362-3:2017); German version EN ISO 14362-3:2017
• DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
• DIN EN ISO 15752:2010-05 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010); German version EN ISO 15752:2010
• DIN EN ISO 15004-1:2019 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO/DIS 15004-1:2019); German and English version prEN ISO 15004-1:2019
• DIN EN 60512-1-4:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General; Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997); German version EN 60512-1-4:1997
• DIN EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
• DIN EN 61290-5-3:2002-11 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance using an electrical spectrum analyser (IEC 61290-5-3:2002); German version EN 61290-5-3:2002
• DIN EN IEC 62496-2-61:2021-09 Optical circuit boards - Basic test and measurement procedures - Part 2-61: Test methods - Flexibility for flexible optic-electric circuits (IEC 86/570/CD:2020); Text in German and English / Note: Date of issue 2021-08-06
• DIN 96298-2:2016-10 Medical instruments - Terms, measuring methods and tests - Part 2: Measuring methods for the determination of basic measurements of surgical standard instruments
• DIN EN 14718:2015 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method; German version EN 14718:2014
• DIN EN ISO 21570:2006 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005);English version of DIN EN ISO 21570:2006-02
• DIN EN 61290-6-1:1999-08 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters; optical demultiplexer (IEC 61290-6-1:1998); German version EN 61290-6-1:1998
• DIN EN 60512-1-4:1998-02 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General; Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997); German version EN 60512-1-4:1997
• DIN EN ISO 10289:2001-04 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999); German version EN ISO 10289:2001
• DIN ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)
• DIN EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006); English version of DIN EN ISO 15004-1:2009-07
• DIN 51068-1:1976 Testing of ceramic raw and basic materials - Determination of resistance to thermal shock - Water quenching method for refractory bricks
• DIN 51068:2008 Testing of ceramic raw and basic materials - Determination of resistance to thermal shock - Water quenching method for refractory bricks
• DIN EN 60512-16-20:1997-03 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IE...
• DIN 51001 Beiblatt 1:2010-05 Testing of oxidic raw materials and basic materials - General bases of work for X-Ray fluorescence method (XRF) - General survey on disintegration methods referred to groups of materials for the determination of test specimens for XRF
• DIN ISO 9370:2018 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method (ISO 9370:2017); Text in German and English
• DIN EN 13329:2021-11 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods; German version EN 13329:2016+A2:2021 / Note: To be replaced by DIN EN 13329 (2023-03) (in preparation).
• DIN EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013); German version EN ISO 14720-1:2013
• DIN EN 17142:2017 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods; German and English version prEN 17142:2017
• DIN EN 17142:2019-04 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods; German version EN 17142:2018
• DIN EN 17142:2019 Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods
• DIN EN 60512-20-2:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test: 20b: Flammability tests; Fireproofness (IEC 60512-20-2:2000); German version EN 60512-20-2:2000
• DIN 51790-7:2002-01 Testing of liquid fuels - Determination of the vanadium and nickel content - Part 7: Analysis by wavelength dispersive X-ray spectrometry (XRS) and Fundamental-Parameter-Method
• DIN V ENV 12038:2002 Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes; German version ENV 12038:2002
• DIN EN 14978:2021-11 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods; German version EN 14978:2016+A1:2021 / Note: To be replaced by DIN EN 13329 (2023-03) (in preparation).
• DIN EN 13329:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods (includes Amendment :2017)
• DIN EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
• DIN EN ISO 15367-1:2004-02 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003
• DIN EN ISO 13078:2011 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO/DIS 13078:2011); German version prEN ISO 13078:2011
• DIN EN IEC 63005-2:2020-12 Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating the performance of basic functions (IEC 63005-2:2019); German version EN IEC 63005-2:2020
• DIN EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 1: Test 11a: Climatic sequence (IEC 60512-11-1:1995); German version EN 60512-11-1:1999
• DIN EN 60512-14-7:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14-17:1998
• DIN EN 60512-23-3:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 60512-23-3:2000); German version EN 60512-23-3:2001
• DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
• DIN 38415-3:1996 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 3: Determination of the genotype potential of water and waste water components with the umu-test (T 3)
• DIN EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020); German version EN ISO 15004-1:2020
• DIN EN 60512-19-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests; section 3: Test 19c: Fluid resistance (IEC 60512-19-3:1997); German version EN 60512-19-3:1997

Indonesia Standards, What are the basic methods of testing

• SNI 03-4809-1998 Test method for comparing concrete on the basic of the bond developed with reinforcing steel

Institute of Interconnecting and Packaging Electronic Circuits (IPC), What are the basic methods of testing

• IPC TM-650-1973 TEST METHODS MANUAL Includes All Revisions; Revision E: 05/2004

ES-AENOR, What are the basic methods of testing

• UNE 20-606 Pt.7-1986
• UNE 20-606 Pt.1-1986
• UNE 20-606 Pt.6-1986
• UNE 20-606 Pt.9-1985
• UNE 20-606 Pt.2-1982
• UNE 20-606 Pt.2-1986

PK-PSQCA, What are the basic methods of testing

• PS 42-1958 PAKISTAN STANDARD METHODS FOR TESTING FASTNESS OF DYES ON TEXTILES TO ORGANIC SOLVENTS

Lithuanian Standards Office , What are the basic methods of testing

• LST EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
• LST EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
• LST EN 60512-16-20-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 16: Mechanical tests on contacts and terminations. Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 605
• LST EN 60512-1-4-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1: General. Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997)
• LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
• LST EN ISO 15752:2010 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010)
• LST EN 13329-2006+A1-2009 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• LST EN 60512-11-8-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11: Climatic tests. Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995)
• LST EN 60512-20-2-2002 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 20-2: Test 20b: Flammability tests. Fireproofness (IEC 60512-20-2:2000)
• LST EN IEC 60794-1-403:2021 Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3 (IEC 60794-1-403:2021)
• LST EN 60512-14-7-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 14: Sealing tests. Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997)
• LST EN 60512-11-1-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence (IEC 60512-11-1:1995)
• LST EN 60512-19-3-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 19: Chemical resistance tests. Section 3: Test 19c. Fluid resistance (IEC 60512-19-3:1997)
• LST EN 14978-2006 Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• LST EN 60512-23-3-2002 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 60512-23-3:2000)
• LST EN 60512-6-5-2002 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 6: Dynamic stress tests. Section 5: Test 6e: Random vibration (IEC 60512-6-5:1997, modified)
• LST EN 61000-4-24-2001 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques. Section 24: Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication (IEC 61000-4-24:1997)
• LST EN 60512-1-3-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1: General examination. Section 3: Test 1c. Electrical engagement length (IEC 60512-1-3:1997)
• LST EN 61290-6-1-2002 Optical fibre amplifiers. Basic specification. Part 6-1: Test methods for pump leakage parameters. Optical demultiplexer (IEC 61290-6-1:1998)
• LST EN ISO 15367-1:2004 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003)

AT-ON, What are the basic methods of testing

• OENORM EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
• ONORM S 1817-2001 Testing of textiles - Quantitative analysis of binary mixtures - Acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres - Dimethyl formamide method

CH-SNV, What are the basic methods of testing

• SN EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., What are the basic methods of testing

• IEEE 1620.1-2006 Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators (IEEE Computer Society)

Association of German Mechanical Engineers, What are the basic methods of testing

• VDI 4205 Blatt 1-2003 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Fundamentals

未注明发布机构, What are the basic methods of testing

• BS ISO 15752:2000 Ophthalmic instruments — Endoilluminators — Fundamental requirements and test methods for optical radiation safety
• DIN EN 13329:2016 Laminate floor coverings – Elements with a surface layer based on aminoplastic thermosetting resins – Specifications, requirements and test methods
• DIN EN 61290-7-1:1999 Fiber Optic Amplifiers – Basic Specification Part 7-1: Test Methods for Out-of-Band Insertion Loss Optical Power Meters and Filters
• DIN EN IEC 61300-2-4:2019 Fiber optic cable connecting elements and passive components – Basic test and measurement methods – Part 2 4: Tests – Tensile strength of fiber or cable connection (IEC 61300 2 4:2019)

YU-JUS, What are the basic methods of testing

• JUS N.A5.710-1981 Basic environmental testing procedures.Test Ba:Dry heat for non heat-dissipating specimen with sudden change of temprerature

CENELEC - European Committee for Electrotechnical Standardization, What are the basic methods of testing

• EN 61290-3:2000 Optical Fibre Amplifiers - Basic Specification - Part 3: Test Methods for Noise Figure Parameters
• EN 61290-1-3:1998 Optical Fibre Amplifiers - Basic Specification Part 1-3: Test Methods for Gain Parameters Optical Power Meter
• EN 61290-2-3:1998 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters Optical Power Meter
• EN 61290-1-1:1998 Optical Fibre Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters Optical Spectrum Analyzer
• EN 61290-2-1:1998 Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters Optical Spectrum Analyzer
• EN 61290-2-2:1998 Optical Fibre Amplifiers - Basic Specification Part 2-2: Test Methods for Optical Power Parameters Electrical SPectrum Analyzer
• EN 60512-23-3:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

Professional Standard - Post and Telecommunication, What are the basic methods of testing

• YD/T 1938.1-2009 Test method of Session Initiation Protocol(SIP).Part 1: Basic Session Initiation Protocol(SIP)
• YD/T 2019.3-2017 Test method for equipments in broadband customer network based on telecommunication network.Part 3: Unified high-speed wire-line based home networking device
• YD/T 2457.1-2013 Test method of services based on the unified IMS multimedia telephony service (release 1).Part1: basic services and required supplementary services

European Committee for Electrotechnical Standardization（CENELEC）, What are the basic methods of testing

• EN 60512-11-8:1999 Electromechanical components for electronic equipment Basic testing procedures and measuring methods Part 11: Climatic tests Section 8: Test 11h - Sand and dust
• EN IEC 60794-1-403:2021 Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3
• EN IEC 60794-1-309:2023 Optical fibre cables - Part 1-309: Generic specification - Basic optical cable test procedures - Cable element test methods - Bleeding and evaporation of filling or flooding compounds, Method G9
• EN IEC 61300-3-53:2021/AC:2023-07:2023 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveg...

国家市场监督管理总局、中国国家标准化管理委员会, What are the basic methods of testing

• GB/T 5095.2307-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors

ETSI - European Telecommunications Standards Institute, What are the basic methods of testing

• ES 202 786-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Support of interfaces with continuous signals (V1.4.1)
• ES 202 786-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Support of interfaces with continuous signals (V1.3.1)
• ES 202 786-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Support of interfaces with continuous signals (V1.2.1)
• ES 202 786-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Support of interfaces with continuous signals (V1.1.1)

The American Road & Transportation Builders Association, What are the basic methods of testing

• AASHTO TP18-1994 Standard Test Method for Determining the Fundamental Transverse Frequency and Quality Factor of Concrete Prism Specimens 2000 Edition; Interim Edition 4/2001 R(1996)

IN-BIS, What are the basic methods of testing

• IS 12448 Pt.1-1988
• IS 12448 Pt.3-1989
• IS 12448 Pt.4-1989
• IS 9000 Pt.14/Sec.1-1988
• IS 12448 Pt.2/Sec.3-1988
• IS 12448 Pt.2/Sec.1-1988
• IS 12448 Pt.2/Sec.2-1988
• IS 12448 Pt.2/Sec.4-1988

GOSTR, What are the basic methods of testing

• GOST R ISO 17190-11-2019 Urine-absorbing aids at urine incontinence. Test methods for characterizing polymer-based absorbent materials. Part 11. Determination of suspended solids
• GOST R ISO 15367-1-2012 Laser and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront. Part 1. Terminology and fundamental aspects
• GOST R 57630-2017 Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system's elementary performance

International Telecommunication Union (ITU), What are the basic methods of testing

• ITU-T K.54-2004 Conducted immunity test method and level at fundamental power frequencies SERIES K: PROTECTION AGAINST INTERFERENCE Study Group 5
• ITU-T K.54 FRENCH-2004 Conducted immunity test method and level at fundamental power frequencies SERIES K: PROTECTION AGAINST INTERFERENCE Study Group 5
• ITU-T K.54 SPANISH-2004 Conducted immunity test method and level at fundamental power frequencies SERIES K: PROTECTION AGAINST INTERFERENCE Study Group 5

(U.S.) Telecommunications Industries Association , What are the basic methods of testing

• TIA/EIA-455-222-2001 FOTP-222 IEC 61290-3 Optical Fiber Amplifiers Basic Specification Part 3: Test Methods for Noise Figure Parameters
• TIA/EIA-455-208-2000 FOTP-208 IEC 61290-1-3 Optical Fibre Amplifiers - Basic Specification Part 1-3: Test Methods for Gain Parameters - Optical Power Meter
• TIA-455-212-2000 IEC 61290-6-1: Optical Fibre Amplifiers- Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters - Optical Demulplexer
• TIA/EIA-455-206-2000 FOTP-206 IEC 61290-1-1 Optical Fibre Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer
• TIA/EIA-455-211-2000 FOTP-211 IEC 61290-2-3 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter

GM Daewoo, What are the basic methods of testing

• GMKOREA EDS-T-7756-2011 Test Method for Determining the Resistance to Abrasion of Organic Coatings (VERSION: 3; English/Korean; Do Not Use on New Program; No Replacement)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, What are the basic methods of testing

• ITU-T K.54-2000 Conducted Immunity Test Method and Level at Fundamental Power Frequencies Series K: Protection Against Interference (Study Group 5)

Canadian Standards Association (CSA), What are the basic methods of testing

• CSA ISO/IEC 10373-3-02:2002 Identification cards Test methods Part 3: Integrated circuit(s) cards with contacts and related interface devices First Edition; ISO/IEC 10373-3: 2001

IEC - International Electrotechnical Commission, What are the basic methods of testing

• TS 62736-2016 Ultrasonics – Pulse-echo scanners – Simple methods for periodic testing to verify stability of an imaging system’s elementary performance (Edition 1.0)

ZA-SANS, What are the basic methods of testing

• SANS 61000-4-24:2006 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication

Others:   What are the methods of data testing, What are the basic methods of testing.