ZH
RU
ES

Salt Tester

Salt Tester, Total:496 items.

In the international standard classification, Salt Tester involves: Paint ingredients, Analytical chemistry, Spices and condiments. Food additives, Applications of information technology, Geology. Meteorology. Hydrology, Leather technology, Inorganic chemicals, Radiation protection, Fertilizers, Agricultural machines, implements and equipment, Environmental testing, Linear and angular measurements, Non-destructive testing, Construction materials, Kitchen equipment, Fruits. Vegetables, Meat, meat products and other animal produce, Pharmaceutics, Products of the textile industry, Optical equipment, Optics and optical measurements, Electricity. Magnetism. Electrical and magnetic measurements, Quality, Testing of metals, Earthworks. Excavations. Foundation construction. Underground works, Measurement of time, velocity, acceleration, angular velocity, Horology, Machine tools, Mechanical testing, Animal feeding stuffs, Food products in general, Milk and milk products, Machine tool systems, Glass, Industrial automation systems, Astronomy. Geodesy. Geography, Mining equipment, Fibre optic communications, Electrical and electronic testing, Lubricants, industrial oils and related products, Petroleum products in general, Cereals, pulses and derived products, Farming and forestry, Medical equipment, Rubber, Screw threads, Education, Company organization and management, General methods of tests and analysis for food products, Electrical wires and cables, Power stations in general, Measurement of force, weight and pressure, Coals, Extraction and processing of petroleum and natural gas, Nuclear energy engineering, Surface treatment and coating, Mining and quarrying, Soil quality. Pedology, Measurement of volume, mass, density, viscosity, Ceramics, Hydraulic construction, Fuels, Textile fibres, Water quality, Protection against dangerous goods, Paper and board, Power transmission and distribution networks, Metrology and measurement in general, Radiation measurements, Beverages, Equipment for the metallurgical industry, Transport, Information sciences. Publishing, Air quality, Pulps, Non-metalliferous minerals, Protection of and in buildings, Audio, video and audiovisual engineering, Refrigerating technology, Semiconductor devices, Iron and steel products, Standardization. General rules, Equipment for the chemical industry, Technical drawings, Road vehicle systems.

National Metrological Verification Regulations of the People's Republic of China, Salt Tester

JJG 845-1993 Verification Regulation of Raw Cotton Moisture Tester
JJG 950-2000 Verification Regulation of Oil Content in Water Analyzers
JJG 763-2002 Verification Regulation of CTD Measuring Instruments
JJG 891-1995 Verification Regulation of Instruments for Measuring The Moisture Content of Grain With Capacitance and Resistance Methods
JJG 656-2013 Verification Regulation of Nitrate-Nitrogen Automatic Analyzers
JJG(石油) 40-1995 Verification Regulation of the Pressure Calcareous Rock Meter
JJG(轻工) 77-1991 Salt Spray Test Chamber Verification Regulations
JJG(轻工) 79-1991 Calibration rules for watch instrument calibrator
JJG 892-2011 Verification Regulation of Eye Refractometers
JJG 946-1999 Verification Regulation of Pressure Tide Gauge
JJG 947-1999 Verification Regulation of Acoustic Tide Gauge
JJG 169-1993 Verification Regulation of Instrument Transformer Test Set
JJG 587-1997 Verification Regulation of Float-type Gauge
JJG 169-2010 Verification Regulation of Transformers Test Set
JJG(交通) 016-1999 Verification Regulation of Roller Opposite Force Type Tester's Aligner
JJG(交通) 017-1999 Verification Regulation of Slip Plate Type Automobile Side Slip Tester's Aligner
JJG(轻工) 81-1991 Calibration rules for mechanical clock calibrator
JJG(轻工) 85-1991 Verification Regulations for Watch Shockproof Tester
JJG(轻工) 82-1991 Calibration Regulations for Quartz Watch Calibrator
JJG(纺织) 062-1995 Verification Regulations for Insolation and Climate Tester
JJG(轻工) 83-1991 Verification Regulations for BMP-2 Quartz Clock Instrument Accuracy Calibrator
JJG 779-1992 Verification Regulation of Chcker of Speed and Milege Meter for Cars
JJG 922-1996 Verification Regulation of The Standard Device of Vertex Power for Refractometers
JJG 922-2008 Verification Regulation of Standard Devices of Vertex Power for Eye Refractometers
JJG 1097-2014 Phoropters (Eye Chart Included)
JJG(海洋) 02-1996 Verification regulations for float type tide gauge (water level gauge)
JJG(航空) 047-1989 MGX-B Clamp Meter Calibrator Verification Regulations
JJG(轻工) 92-1992 Verification regulations for carpet static load tester
JJG(航天) 25-1987 Verification Regulations for XD-40 Electric Stopwatch Calibrator
JJG(轻工) 90-1992 Verification rules for carpet quadruped treading tester
JJG(交通) 018-1999 Verification Regulation of Roller Type Speedometer Tester's Aligner
JJG(民航) 043-1997 Verification Regulation of KПA-TПP1T Oil Gauge Tester
JJG 1058-2010 Verification Regulation of Laboratory Oscillation-type Liquid Density meters
JJG(纺织) 065-1995 Verification rules for fabric stiffness tester by inclined plane method
JJG 931-1998 Verification Regulation of Instruments for Measuring Monent of Pendulum of Impact Tester
JJG(民航) 010-1995 Verification Regulation of Autothrottle System Test Bench “ПPK-9”
JJG(电子) 02003-1988 Trial Verification Regulations for DO30-C Digital Three-purpose Meter Calibrator

German Institute for Standardization, Salt Tester

DIN 53770-10:1978 Testing of pigments; determination of matter soluble in hydrochloric acid, copper content
DIN 18132:2012 Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18132:1995 Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18723-2:1990 Field procedure for precision testing of surveying instruments; levels
DIN 18723-3:1990 Field procedure for precision testing of surveying instruments; theodolites
DIN 18723-7:1990 Field procedure for precision testing of surveying instruments; gyroscopes
DIN 51350-4:2015 Testing of lubricants - Testing in the four-ball tester - Part 4: Determination of welding load of consistent lubricants
DIN 51575:2011 Testing of mineral oils - Determination of sulfated ash
DIN 51575:2016 Testing of mineral oils - Determination of sulfated ash
DIN EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; German version EN 12668-1:2010
DIN EN ISO 15548-1:2009 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2008); German version EN ISO 15548-1:2008
DIN ISO 9022-4:2003 Optics and optical instruments - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2002)
DIN 18723-4:1990 Field procedure for precision testing of surveying instruments; optical distance measuring instruments
DIN ISO 3158:2018 Timekeeping instruments - Symbolization of control positions (ISO 3158:1976)
DIN EN 12370:1999 Natural stone test methods - Determination of resistance to salt crystallisation; German version EN 12370:1999
DIN 18723-5:1990 Field procedure for precision testing of surveying instruments; plumbing instruments
DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
DIN 53770-9:1977 Testing of pigments; determination of matter soluble in hydrochloric acid, cobalt content
DIN 51726:2004 Testing of solid fuels - Determination of the carbonate carbon dioxide content
DIN 54206:1975 Testing of textiles; quantitative analysis of binary mixtures, protein fibres with other fibres, hypochlorite method
DIN 51350-4:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of welding load of consistent lubricants
DIN 53770-13:1976 Testing of pigments; determination of matter soluble in hydrochloric acid, mercury content
DIN 53770-6:1977 Testing of pigments; determination of matter soluble in hydrochloric acid, cadmium content
DIN 53770-7:1977 Testing of pigments; determination of matter soluble in hydrochloric acid, chromium content
DIN 53770-4:1976 Testing of pigments; determination of matter soluble in hydrochloric acid, barium content
DIN 53770-11:1978 Testing of pigments; determination of matter soluble in hydrochloric acid, manganese content
DIN 51350-3:2010 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
DIN 51350-3:2015 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
DIN 54600-8:1982 Testing of paper and board; Testing for antimicrobial additives; Determination of the methylene-bis-thioscyanate content
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 51834-1:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN 51350-5:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants
DIN 51350-5:2015 Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
DIN 51834-1:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN ISO/TS 22476-11:2005 Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test (ISO/TS 22476-11:2005); German version CEN ISO/TS 22476-11:2005
DIN 51350-1:1977 Testing of lubricants; testing in the Shell-four-ball tester, general working principles
DIN 51814:1981 Testing of lubricants; determination of mineral oil fraction and soap of lubricating greases; dialysis method
DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
DIN EN ISO 22232-1:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020); German version EN ISO 22232-1:2020
DIN 53127:2004 Testing of paper and board - Determination of water-soluble sulfates in paper and board
DIN 38408-3:1993 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of ozone (G 3)
DIN 51834-3:2001 Testing of lubricants - Tribological test in translatory oscillation apparatus - Part 3: Determination of tribological behaviour of materials in co-operation with lubricants
DIN 51350-3:1977 Testing of lubricants; testing in the Shell four-ball tester, determination of wearing caracteristics of liquid
DIN 51350-2:1977 Testing of lubricants; testing in the Shell-four-ball tester, determination of welding load of fluid lubricants
DIN 53770-14:1979 Testing of pigments; determination of the hydrochloric acid soluble matter, selenium content
DIN 53770-12:1977 Testing of pigments; determination of matter soluble in hydrochloric acid, nickel content
DIN 53770-15:1977 Testing of pigments; determination of matter soluble in hydrochloric acid, zinc content
DIN 54270-4:1977 Testing of textiles; determination of the limit-viscosity of celluloses, nitrate procedure
DIN EN 1595:1997-05 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997
DIN 38408-5:1990 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
DIN 18723-1:1990 Field procedure for precision testing of surveying instruments; general information
DIN 28411:1976 Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms
DIN 2272-1:1985 Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices

工业和信息化部/国家能源局, Salt Tester

JB/T 12966-2016 Bromate rapid detector
JB/T 20179-2017 Microbiological limit tester
JB/T 4136.3-2017 Instrument Lathes Part 3: Accuracy Inspection of Horizontal Lathes
JB/T 4136.4-2017 Instrument Lathes Part 4: Accuracy Inspection of Finishing Lathes
JB/T 8326.1-2017 CNC Instrument Horizontal Lathe Part 1: Accuracy Inspection
JB/T 4136.5-2017 Instrument Lathes Part 5: Turret Lathe Accuracy Inspection

SE-SIS, Salt Tester

SIS SS 61 43 19-1988 Identification cards - Numbering system - Check number on identity card type ID-1
SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines

Taiwan Provincial Standard of the People's Republic of China, Salt Tester

CNS 548-1998 Method of test for food grade salt
CNS 282-1969 Method of Chemical Test for Sulfates
CNS 13030-1992 Method of Test for Hazardous Components in Fertilizers - Determination of Chromium Content
CNS 13029-1992 Method of Test for Hazardous Components in Fertilizers - Determination of Nickel Content
CNS 13031-1992 Method of Test for Hazardous Components in Fertilizers - Determination of Titanium Content
CNS 5653-1980 Method of Test for Level Gauge
CNS 3340-1972 Method of Test for Potassium Ferricyanide of Industrial Grade
CNS 8188-1982 3
CNS 9313-1982 Method of Test for Colour Fastness to Metals in the Dyebath: Iron and Copper
CNS 13998-1997 Method of test for food grade salt-determination of lead,copper and cadmium
CNS 14681-2002 Method of test for fertilizers (Determination of sulfate content)
CNS 15091-4-2007 Method of test for deep sea water - Determination of salinity
CNS 2770-10-1986 Method of Test for Feeds : Determination of Ash Insoluble in Hydrochloric Acid
CNS 15091-14-2007 Method of test for deep sea water - Determination of nitrate
CNS 15091-13-2007 Method of test for deep sea water - Determination of silicate
CNS 15091-12-2007 Method of test for deep sea water - Determination of phosphate
CNS 2770.10-1986 Method of Test for Feeds : Determination of Ash Insoluble in Hydrochloric Acid
CNS 13674-1996 Method of Test for Pesticide Residues in Foods-Test of Thiodicarb,a Carbomate Insecticide
CNS 12980-1992 Method of Test for Milk and Milk Products - Determination of Nitrate and Nitrite Contents of Edible Cheese
CNS 12170-1987 Method of Test for Fiber Optic Devices (FOTP-16 Salt Spray Corrosion Test)
CNS 13309-1993 Method of Test for Pesticide Residues in Foods - Test of Carbendazim, a Carbamate Pesticide
CNS 13415-1994 Method of Test for Pesticide Residues in Foods - Test of Propoxur, a Carbamate Pesticide
CNS 13675-1996 Method of Test for Pesticide Residues in Foods-Test of Thiodicarb Oxime,a Carbomate Insecticide
CNS 15091-3-2007 Method of test for deep sea water - Measurement of in-situ salinity
CNS 15091-15-2007 Method of test for deep sea water - Determination of nitrite
CNS 12980-2007 Method of test for milk and milk products - Determination of nitrate and nitrite content in edible cheese
CNS 13761-1996 Method of Test for Pesticide Residues in Foods-Test of Benfuracarb,a Carbamate Insecticide
CNS 13237-1993 Method of Test for Pesticide Residues in Foods - Test of Methomyl, a Carbamate Insecticide
CNS 13236-1993 Method of Test for Pesticide Residues in Foods - Test of Pirimicarb, a Carbamate Insecticide
CNS 13672-1996 Method of Test for Pesticide Residues in Foods-HPLC Test of Bendiocarb,a carbamate Insecticide
CNS 13673-1996 Method of Test for Pesticide Residues in Foods-GC Test of Bendiocarb,a carbamate Insecticide
CNS 5478-1980 Method of Test for Resistance of Glaze to Acid and Alkali for Porcelain Laboratory Apparatus
CNS 5476-1980 Method of Test for Resistance of Glaze to High Temperaturs for Porcelain Laboratory Apparatus
CNS 10521-1983 Method of Test for Variable X-ray Beam Limiting Devices for Diagnostic Use
CNS 2770.6-1986 Method of Test for Feeds : Determination of Volatile BAsic Nitrogen
CNS 2770-6-1986 Method of Test for Feeds : Determination of Volatile BAsic Nitrogen
CNS 13572-1995 Method of Test for Pesticide Residues in Foods-Test of Fenobucarb,a Carbamate Pesticde
CNS 8861-1982 Method of Test for Glass Apparatus for Chemical Analysis
CNS 6391-2008 Method of test for meat and meat products - Determination of nitrate content
CNS 5475-1980 Method of Test for Resistance to Heat and to Sudden Change in Trmpreature for Porcelain Laboratory Appartus
CNS 2924-1984 Method of Test for Fineness of Portland Cement (by Air Permeability Apparatus)
CNS 5474-1980 Method of Test for Porosity of Body and Imperfections of Glaze for Porcelain Laboratory Apparatus
CNS 5477-1980 Method of Test for Constancy of Mass on Ignition for Porcelain Laboratory Apparatus
CNS 8999-1982 Methods of Test for Copper in Industrial Waste Water - Polarographic Method
CNS 8625-2004 Method of test for fruit and vegetable products－Determination of ash insoluble in hydrochloric acid
CNS 7228-1981 Finish Test of Wooden Cabinets for Electronic Equipments
CNS 13147-1993 Method of Test for Silicates and Silica Content in Pulp ( Wet Ash Method )
CNS 9054-1982 Testing Method of Vibration and Shock for Construction Machinery Gauges
CNS 6899-1988 Unrecorded Magnetic Tapes for Instrumentation Applications-Physical Properties and Test Methods
CNS 13279-1993 Method of Test for Hazardous Compenents in Sulfate Fertilizers (Determination of Free Sulfuric Acid Content)

国家质量监督检验检疫总局, Salt Tester

SN/T 5018-2017 Inspection and Quarantine Information System Data Backup Specifications
SN/T 4605-2016 Supervision and Inspection Regulations for Imported Feed Additives L-Lysine Hydrochloride and DL-Methionine

Professional Standard - Ocean, Salt Tester

HY/T 099-2007 Test method of seawater nutrients analyzer
HY 21.6-1992 The basic method of environmental test for oceanographic instruments - Guideline for salt fog test
HY/T 202-2016 Guidelines for drafting inspection program of oceanographic observation instruments
HY/T 0333-2022 General guidelines for third-party inspection of marine instruments and equipment

Jilin Provincial Standard of the People's Republic of China, Salt Tester

DB22/T 2001-2014 Bromate Rapid Detector in Drinking Water

HU-MSZT, Salt Tester

Professional Standard - Commodity Inspection, Salt Tester

SN/T 0623-1996 Rule for inspection of edible salt for export
SN/T 0301-1993 Rules for inspection of salted vegetablesfor export
SN/T 0623-2010 Rules for inspection of edible salt for import and export
SN/T 1108-2002 Rules for the inspection of salted shrimps for export
SN/T 0940-2011 Rules for the inspection and quarantine protocol of wet saltedpig skin for import and export
SN/T 0849-2000 Rules for the inspection of wetsalted oxen hides for import and export
SN/T 0633-1997 Rules of inspection of salted edible mushrooms for export
SN/T 0439-1995 Rule for inspection of salted undaria for export
SN/T 0940-2000 Rules for the inspection of wet salted pigskin for import and export
SN/T 0387-1995 Rules for the inspection of salted jellyfish and jellyfish head for export
SN/T 0119-1992 Method for inspection of drysaltedgoat skins for import
SN/T 0929-2000 Method for the determination of iodine in iodized salt for import and export
SN/T 0800.11-1999 Cereals and feedstuffs for import and export.Method for the determination of salt contents
SN 0198-1993 Method for determination of nitrophenol salt residues in vegetables for export
SN/T 0244-1993 General rules for the inspecting and drafting certificatesof machineries,electric appliances,instruments for import
SN/T 1566-2005 Determination of down content of washed feather and down-Down testing instrumentation
SN/T 0812-1999 Electrotechnical instrument for export.Rules for the inspection of digital multi-use meter
SN/T 1843.2-2006 Rules for the inspection of instruments for import and export. Part 2: Alternating current static watt-hour meters
SN/T 1843.3-2012 Rules for the inspection of instrumentation for import and export.Part 3:Analog/digital multimeter
SN/T 0867-2000 Method for the determination of cyclamate in canned fruits for import and export
SN/T 0717-1997 Rules for inspection of transport packaging for export electrical and instrument commodites
SN/T 0717-2013 Rules for inspection of transport packaging for export electrical and instrument-commodities
SN 0597-1996 Method for the determination of o-phenylphenol and its sodium salt residues in fruits for export

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Salt Tester

GB/T 9700-2009 Test method for salt-wet pigskin
GB/T 9700-2009 Test method for salt-wet pigskin
GB/T 9700-2009"> Test method for salt-wet pigskin
GB/T 11606.13-1989 The method of environmental test for analytical instruments--Salt mist test
GB/T 18884.3-2015 Household kitchen.Part 3:Test method and check rule
GB 7741-1987 Method of inspection for export salted casings
GB/T 7741-1987 Method of inspection for export salted casings
GB/T 9700-1988 Inspection method of salted pig skin for export
GB/T 32195-2015 Non-destructive testing instruments.Quality inspection provisions
GB/T 14480.1-2015 Nondestructive Testing Instruments Eddy Current Testing Equipment Part 1: Instrument Performance and Inspection
GB/T 12085.4-1989 Optics and optical instruments--Environmental test methods--Salt mist
GB/T 13634-2000 Calibration of force-proving instruments used for the verification of testing machines
GB/T 25472-2010 Quality inspection provisions for analyzers
GB/T 15726-1995 Glassware--stress examination methods
GB/T 4028-1994 Timekeeping instruments-Symbolization of control positions
GB/T 25921-2010 Electrical and instrumentation loop check
GB/T 4028-2013 Symbolization of control positions for timekeeping instruments
GB/T 29252-2012 Rule of the quality inspection of laboratory instruments and equipments
GB/T 42399.1-2023 Nondestructive Testing Instruments Performance and Inspection of Phased Array Ultrasonic Equipment Part 1: Instrumentation
GB/T 5170.8-2017 Inspection methods for environmental testing equipments.Part 8:Salt mist testing equipments
GB/T 6593-1996 Quality inspection provisions for electronic measuring instruments
GB/T 32710.12-2016 Safety requirements for environmental testing and conditioning equipment.Part 12:Salt baths
GB/T 12085.4-2010 Optics and optical instruments.Environmental test methods.Part 4:Salt mist
GB/T 29302-2012 Non-destructive testing instruments.Characterization and verification of phased array ultrasonic examination systems
GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxial testing machines
GB 3350.1-1982 Apparatus for physical test of cement--Mixer for mixing mortars
GB/T 17458-1998 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products.Salt mist testing equipments
GB/T 27664.1-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
GB/T 14480.2-2015 Nondestructive Testing Instruments Eddy Current Testing Equipment Part 2: Probe Performance and Inspection
GB/T 24762-2009 Geometrical Product Specifications(GPS).Acceptance test and reverification test for video measuring machine
GB/T 36416.2-2018 Testing machine vocabulary.Part 2:Non-destructive testing instruments
GB 19456-2004 Safety code for inspection of hazardous properties of dangerous goods for nitrates
GB/T 10257-2001 Quality inspection rule for nuclear instruments and nuclear radiation detectors
GB/T 11684-1989 Characterisics and test methods of electromagnetic interferences in nucleonic instrumentations for reactors
GB/T 12374-1990 Standard method for examination of nitrate in air of residential areas--Reduction of the cadmium column-spectrophotometry of N-(1-naphthyl)ethylene diamine hydrochloride
GBJ 131-1990 Quality inspection and evaluation of automatic apparatus installation
GB/T 29405-2012 Inspection of grain and oils.Determination of fat acidity of cereal and cereal products.Instrumental analysis method

Korean Agency for Technology and Standards (KATS), Salt Tester

KS A ISO 7205:2003 Radionuclide gauges－Gauges designed for permanent installation
KS B ISO 9935:2001 Non-destructive testing-Penetrant flaw detectors-General technical requirements
KS B ISO 9935:2016 Non-destructive testing－Penetrant flaw detectors－General technical requirements
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS B 0422-2016 Inspection Method for Taper Screw Gauges
KS B ISO 12710:2005 Non-destructive testing－Ultrasonic inspection－Evaluating electronic characteristics of ultrasonic test instruments
KS B ISO 9022-4:2003 Optics and optical instruments-Environmental test methods-Part 4:Salt mist
KS B ISO 9022-4:2013 Optics and optical instruments ― Environmental test methods ― Part 4: Salt mist
KS B ISO 376:2002 Metallic materials-Calibration of force-proving instruments used for the verification of uniaxial testing machines
KS B ISO 376:2015 Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS B ISO 9342:2003 Optics and optical instruments-Test lenses for calibration of focimeters
KS B ISO 9342:2013 Optics and optical instruments ― test lenses for calibration of focimeters
KS B ISO 4168:2005 Timekeeping instruments-Conditions for carrying out checks on radioluminescent deposits

其他未分类, Salt Tester

BJY 201709 Supplementary testing methods for magnesium salts, aluminum salts and sulfates in Tongcao materials and decoction pieces
BJY 202109 Supplementary testing methods for permanganate inspection items in ginseng and American ginseng medicinal materials

Professional Standard - Aerospace, Salt Tester

QJ 990.12-1986 Coating inspection method Coating salt spray resistance inspection method
QJ 3024-1998 Inspection method for active excess residue of rocket star instrument

Professional Standard - Machinery, Salt Tester

JB/T 11780-2014 Non-destructive testing instrument.Characterization and verification of array eddy current testing instrument
JB/T 7461-1994 Laboratory instruments product testing rules
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 5463-1991 Inspection rules for electronic magnetometer
JB/T 4136.2-1999 Meter lathe Accuracy inspection
JB/T 6851-1993 Analytical Instrument Quality Inspection Rules
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 7406.2-1994 Testing machine terminology - Non-destructive test instrument
JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 4279.3-2008 Verification procedure for test equipment of enamelled winding wire.Part 3:Elongation tester
JB/T 4279.6-2008 Verification procedure for test equipment of enamelled winding wire.Part 6:Peeling tester
JB/T 4279.14-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 14: Solderability tester
JB/T 4279.4-2008 Verification procedure for test equipment of enamelled winding wire.Part 4:Springness tester
JB/T 4279.5-2008 Verification procedure for test equipment of enamelled winding wire.Part 5:Jerk tester
JB/T 4279.10-2008 Verification procedure for test equipment of enamelled winding wire.Part 10:Tester for resistance to solvents
JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
JB/T 4279.8-2008 Verification procedure for test equipment of enamelled winding wire.Part 8:Cut-through tester
JB/T 4279.9-2008 Verification procedure for test equipment of enamelled winding wire.Part 9:Unidirectional scraping tester
JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire.Part 11:Breakdown voltage tester
JB/T 4279.15-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 15: To-and-fro scraping tester
JB/T 4279.16-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 16: Static friction coefficient tester
JB/T 4279.17-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 17: Dynamic friction coefficient tester
JB/T 11575.2-2013 Handarbour instrumental lathe.Part 2: Testing of accuracy
JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire.Part 12:Continuity of insulation tester(low voltage method)
JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire.Part 13:Continuity of insulation tester(high-voltage method)
JB/T 10059-1999 Modeling method for testing machines and non-destructive testing instruments
JB/T 12020-2014 Inspection criteria for reagent kits used for multi-parameter field fast food quality analyzer
JB/T 4278.19-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 19: Insulation scrape abrasion test device
JB/T 4279.1-1994 General rules for verification methods of enamelled winding wire test equipment

Fujian Provincial Standard of the People's Republic of China, Salt Tester

DB35/T 1694-2017 General technical conditions for rapid bromate fluorescence detector

AT-ON, Salt Tester

ONORM E 1359-1977
ONORM E 1358-1977
ONORM E 1391-1968
ONORM M 1345-1995 Control of measuring and test equipment — Testing instruction for dial test indicators (lever type) for linear measurement
ONORM C 1136-1957

ISA - International Society of Automation, Salt Tester

ISA RP76.0.01-1998 Analyzer System Inspection and Acceptance

Hebei Provincial Standard of the People's Republic of China, Salt Tester

DB13/T 329-1997 Rules for inspection of salted oyster mushrooms for export

Professional Standard - Agriculture, Salt Tester

GB 9700-1988 Inspection method of salt wet pigskin for export
SN/T 0843-2000 Rules for the inspection of salted goatskin for import and export
ZB X 66014-1987 Test method for low-salt solid-state fermented soy sauce
GB 10017-1988 Technical conditions for forest tree seed inspection instruments

RU-GOST R, Salt Tester

GOST R 54465-2011 Meat and meat products. Detection of polyphosphates
GOST 8.626-2013 State system for ensuring the traceability of measurements. Instruments for determination the nitrites and nitrates in food. Verification procedure
GOST 30607-1998 Programmable controllers of machines. General technical requirements
GOST 23667-1985 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
GOST 24507-1980 Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 30630.2.5-2013 Climatic environment stability test methods for machines, instruments and other industrial products. Test methods for salt mist
GOST 4.177-1985 Product-quality index system. Nondectructive testing instruments. Nomenclature of indices
GOST 6758-1976 External control for vehicles. Basic and mounting dimensions

Military Standard of the People's Republic of China-General Armament Department, Salt Tester

GJB 3678-1999 Inspection and acceptance rules for low-light night vision devices
GJB 3882-1999 Inspection and acceptance rules for azimuth levels of surface ships
GJB 4799-1997*GJBz 20432-1997 Inspection and acceptance rules for military infrared thermal imaging instruments
GJB 3349A-2019 Calibration procedures for vacuum stability testers for explosives
GJB/J 3349-1998 Calibration procedures for vacuum stability testers for explosives
GJB 59.31-1991 Armored vehicle test procedures commonly used instruments and alarm device performance inspection methods

国家市场监督管理总局、中国国家标准化管理委员会, Salt Tester

GB/T 32065.10-2020 Environmental test methods for oceanographic instruments—Part 10：Salt fog test
GB/T 15726-2021 Glassware一Stress examination methods
GB/T 40673-2021 Timekeeping instruments—Conditions for carrying out checks on radioluminescent deposits
GB/T 14480.3-2020 Non-destructive testing instruments—Equipment for eddy current examination—Part 3: System characteristics and verification
GB/T 37929-2019 Non-destructive testing instruments—Testing methods for life of X-ray tubes
GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines
GB/T 37511-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Mixolab test

British Standards Institution (BSI), Salt Tester

BS ISO 9022-4:2002 Optics and optical instruments - Environmental test methods - Salt mist
BS EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Instrument characteristics and verification
BS EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments
BS EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments
BS EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS EN ISO 15548-1:2013 Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS IEC 62523:2010 Radiation protection instrumentation - Cargo/vehicle radiographic inspection system
BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage

GB-REG, Salt Tester

REG NASA-LLIS-0098-1992 Lessons Learned - Displacement Leak Detector

Professional Standard - Electricity, Salt Tester

DL/T 5794-2019 Inspection regulations for grouting recorder
DL/T 1112-2009 Verification code of verification equipment for AC&DC meter
DL/T 2115-2020 Voltage monitor inspection technical specification
DL/T 677-2009 Checking and calibration code for on-line chemical monitoring instrument of power plant
DL/T 677-2018 Checking and calibration code for on-line chemical analysis instrument of fossil fuel power plant
DL/T 677-1999 Checking and calibration code for on-line chemical analysis instrument of fossil fuel power plant
DL/T 386-2010 Calibration for second derivative flame atomic emission spectrometer

National Metrological Technical Specifications of the People's Republic of China, Salt Tester

JJF(机械) 021-2008 Calibration specification for armature tester
JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine

Anhui Provincial Standard of the People's Republic of China, Salt Tester

DB34/T 4361-2022 Disposal Specifications for Backup Samples Qualified in Food Safety Sampling Inspection
DB3418/T 025-2022 Specifications for installation and management of instruments and equipment for inspection and testing institutions

Zhejiang Provincial Standard of the People's Republic of China, Salt Tester

DB33/T 508-2004 Rules for the inspection of low-salt ready-to-eat vegetables for export

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Salt Tester

GB/T 33885-2017 Non-destructive testing instruments—General requirements for sampling,routine inspection and type inspection
GB/T 33888-2017 Non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method

Professional Standard - Water Conservancy, Salt Tester

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment
SL 530-2012 Specification for vertification and test of dam safety monitoring instruments

Shanxi Provincial Standard of the People's Republic of China, Salt Tester

DB1404/T 8-2021 Instrument and equipment management requirements for inspection and testing institutions
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography
DB14/T 2497-2022 Guidelines for Instrument and Equipment File Management of Inspection and Testing Institutions

Professional Standard - Petroleum, Salt Tester

SY/T 6471-2000 Maintenance and inspection of measurement while drilling service
SY/T 5230-1991 Basic environmental test methods for petroleum exploration and development instruments Test C: Salt spray test
SY/T 6468-2000 Maintenance and inspection for electronic multi-shot survey system
SY/T 6440-2000 The cheking items and associated specifications for R24 seismic recording system
SY/T 6053-2000 Cheching items and technical specifications for YKZ480 seismic data recorder
SY/T 6092-1994 Maintenance requirements and inspection of positive pulse wireless inclinometer while drilling
SY 5416.1-2016 Measurement and inspection of directional measuring instruments Part 1: While drilling

International Organization for Standardization (ISO), Salt Tester

ISO 3158:1976 Timekeeping instruments; Symbolization of control positions
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 12710:2002 Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments
ISO 9022-4:2002 Optics and optical instruments - Environmental test methods - Part 4: Salt mist
ISO 9022-4:1994 Optics and optical instruments - Environmental test methods - Part 4: Salt mist
ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 10344:1996 Optics and optical instruments - Contact lenses - Saline solution for contact lens testing
ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
ISO/TS 17892-5:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 9022-4:2014/Amd 1:2023 Optics and photonics — Environmental test methods — Part 4: Salt mist — Amendment 1
ISO 376:1999 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 4168:2002 Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits
ISO 4168:1979 Time measurement instruments; Conditions for carrying out checks on radioluminescent deposits
ISO 9342:1996 Optics and optical instruments - Test lenses for calibration of focimeters
ISO 376:1987 Metallic materials; Calibration of force-proving instruments used for the verification of unaxial testing machines

Group Standards of the People's Republic of China, Salt Tester

T/CMA JD042-2021 Inspection Items and Methods of OBD Scan-tool for Vehicle Emission Test
T/CSTM 00425-2023 Non-destructive testing — Steel products — Characterization and verification of automatic eddy current flaw detector
T/CSTM 00426-2023 Non-destructive testing — Steel products— Characterization and verification of automatic magnetic flux leakage flaw detector
T/LZZLXH 064-2021 Specifications for maintenance of laboratory testing instruments and equipment
T/CEC 568-2021 SF6/N2 mixed gas mixture ratio detector calibration and on-site detection method
T/GDCKCJH 007-2020 Specification for archives management of special equipment inspection and testing institutes instrument and equipment archives
T/CEC 126-2016 Calibration method of sulfur hexafluoride gas decomposition product detector

Association Francaise de Normalisation, Salt Tester

NF A09-462*NF EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage.
NF A09-170-1:2008 Non-destructive testing - Equipment for eddy current examination - Part 1 : instrument characteristics and verification.
NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
NF A09-460*NF EN 1518:1998 Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors.
NF M88-901:1985 Petroleum industry. Checking appliances. Bourdon gauges.
NF S86-306:2003 Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.
NF A09-170-1*NF EN ISO 15548-1:2014 Non-destructive testing - Equipment for eddy current examination - Part 1 : instrument characteristics and verification
NF A09-320:1984 NON DESTRUCTIVE TESTING. MANUAL ULTRASONIC INSPECTION OF METALLIC PRODUCTS. SIMPLE IN-SERVICE CHECKING OF APPARATUS CHARACTERISTICS.
NF A03-003:2005 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.
NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
NF T01-036:1980 Molecular absorption spectrophotometry. Methods of inspection of apparatus.
NF A09-320-2/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-320-1*NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
NF A03-003*NF EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.

CZ-CSN, Salt Tester

CSN 25 1970-1968 Cylinder gauges for perpendicularity measurement
CSN 25 0100-1986 Tests and approvals of a types of measuring instruments. General requirements
CSN 35 6551-1990 Nuclear instrumentation. General teehnical requirements and testing methods

Hubei Provincial Standard of the People's Republic of China, Salt Tester

DB42/T 401-2006 Verification Criterion Of Voltage Quality Monitoring Meter
DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

Professional Standard - Building Materials, Salt Tester

JC/T 728-1982 Apparatus for physical test of cement.Standard sieve for testing fineness
JC/T 215-1978 Physical examination method of aluminate self-stressing cement
JC/T 724-1996 Apparatus for physical test of cement.Electrically driven flexure testing device
JC/T 724-1982 Apparatus for physical test of cement.Electrically driven flexure testing device
JC/T 725-1982 Apparatus for physical test of cement.Compression jig
JC/T 722-1982 Apparatus for physical test of cement.Mixer for mixing mortars
JC/T 723-1982 Apparatus for physical test of cement.Vibrator for compacting mortar specimen
JC/T 219-1979 Physical examination method of Portland self-stressing cement (for pipe making)
JC/T 727-1982(1996) Apparatus for physical test of cement.Apparatus for testing normal consistency and setting time of paste
JC/T 729-1989 Apparatus for physical test of cement.Mixer for cement paste

BE-NBN, Salt Tester

NBN-EN 540-1993 Clinical investigation of medical devices for human subjects

U.S. Military Regulations and Norms, Salt Tester

ARMY A-A-52316 C-2010 TESTER, CONSTRUCTION MATERIALS, MOISTURE& DENSITY (TCMMD)

KR-KS, Salt Tester

KS B 5528-2003(2023)

Professional Standard - Geology, Salt Tester

DZ 28.13-1984 Basic Environmental Test Conditions and Methods for Geological Instrument Products Salt Spray Test
DZ 0039.15-1992 Basic Environmental Test Conditions and Methods for Geological Instrument Products Salt Spray Test
DZ 30-1984 Quality Inspection Rules for Geological Instrument Products
DZ 0041-1992 Quality Inspection Rules for Geological Instrument Products
DZ/T 0064.24-1993 Groundwater quality testing method Determination of iron by thiocyanate spectrophotometry

Japanese Industrial Standards Committee (JISC), Salt Tester

JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS Z 2316-2:2014 Non-destructive testing .Eddy current testing .Part 2: Instrument characteristics and verification
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS Z 2352:1992 Method for assessing the overall performance characteristics of ultrasonic pulse echo testing instrument

ZA-SANS, Salt Tester

SANS 9935:2004 Non-destructive testing - Penetrant flaw detectors - General technical requirements
SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces

Qinghai Provincial Standard of the People's Republic of China, Salt Tester

DB63/T 2115-2023 Guidelines for Maintenance of Instruments and Equipment of Inspection and Testing Institutions

Professional Standard - Grain, Salt Tester

LS/T 3706-2012 Test instrument of grain and oils.Technical requirements and test method for automatic titration analyzer
LS/T 6401-2016 Test instrument of grain and oils.Waterlogged suspend method to measure grain bulk density.Technical requirements and test method

European Committee for Standardization (CEN), Salt Tester

EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN ISO 10344:1998 Optics and Optical Instruments - Contact Lenses - Saline Solution for Contact Lens Testing ISO 10344:1996
EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
EN ISO 15548-1:2013 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification
EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators
EN ISO 9342:1998 Optics and Optical Instruments - Test Lenses for Calibration of Focimeters ISO 9342:1996; Superseded by EN ISO 9342-1:2005

Professional Standard - Forestry, Salt Tester

LY/T 1343-2014 Regulations of apparatus performance on tree seed testing
LY/T 1343-1999 Regulations of apparatus performance for tree seed testing

CH-SNV, Salt Tester

VSM 18718.2-1965

Professional Standard - Earthquake, Salt Tester

DB/T 27-2008 Quality inspection provision for earthquake observation instrument

Sichuan Provincial Standard of the People's Republic of China, Salt Tester

DB51/T 1780-2014 Product inspection specification for teaching instruments and equipment
DB51/T 2159-2016 Maintenance Guide for Laboratory Testing Instruments and Equipment

秦皇岛市市场监督管理局标准化科, Salt Tester

DB1303/T 317-2022 Special Equipment Inspection Instrument Management Guide

American Society for Testing and Materials (ASTM), Salt Tester

ASTM E493-97 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM C1380-04(2011) Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM E83-98 Standard Practice for Verification and Classification of Extensometer
ASTM E493-06 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E499-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E493/E493M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E83-06 Standard Practice for Verification and Classification of Extensometer Systems
ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM D8459-23 Standard Test Methods for Detecting Water Soluble Sulfates in Construction Soils
ASTM G99-04a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM E74-01 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-02 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-06 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-13a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM F78-97 Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D7299-12 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

NL-NEN, Salt Tester

NEN 6567-1985 Bacteriological examination of water - Examination of the presence of spores of sulfite reducing clostridia by means of membrane filtration

Professional Standard - Coal, Salt Tester

MT/T 737-1997 Specification of verification for safe use of oxygen combustion bomb
MT/T 737-2007 Specification of verification for safe use of oxygen combustion bomb

Professional Standard - Education, Salt Tester

JY 0002-2003 Testing regulations for educational equipment products

American National Standards Institute （ANSI), Salt Tester

ANSI N323-1978 Radiation protection instrumentation - Test and calibration
ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector

国家进出口商品检验局, Salt Tester

SN/T 0244-1994 "General Rules for Inspection and Certification of Imported Mechanical and Electrical Instruments"

国家能源局, Salt Tester

SY/T 7452-2019 Rotating magnetic source magnetic guide instrument measurement and inspection
NB/T 34053-2017 Inspection standards for classification of suitable non-grain land in coastal saline-alkali areas

The American Road & Transportation Builders Association, Salt Tester

AASHTO T 153-2007 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus

IN-BIS, Salt Tester

IS 10236 Pt.6-1982

Professional Standard - Light Industry, Salt Tester

QB/T 2899-2007 Timekeeping instruments.Conditions for carrying out checks on radioluminescent deposits
QB/T 1474.7-2005 Drawing ruler - Terminology, inspect regulations and mark, package, transport, storage
QB/T 1474.7-1992 Plotter Ruler Terms, Inspection Rules, Signs, Packaging, Transportation, Storage

Heilongjiang Provincial Standard of the People's Republic of China, Salt Tester

DB23/T 1687-2016 Ammonia detector technical requirements and test methods
DB23/T 1688-2016 Formaldehyde detector technical requirements and test methods

水利部, Salt Tester

SL/T 810-2021 Soil moisture monitoring instrument inspection and testing procedures

Canadian General Standards Board （CGSB), Salt Tester

CGSB 1-GP-71 METH 12.1-1974 Methodes D'Essai Des Peintures Et Pigments Couleur Difference De Couleur Par Evaluation Instrumentale

海关总署, Salt Tester

SN/T 5452-2022 Purchasing and Acceptance Guide for Concentrators for Food Testing

Professional Standard - Energy, Salt Tester

DL/T 1462-2023 On-line Instrument Inspection Regulations for Hydrogen System in Power Plants

Danish Standards Foundation, Salt Tester

DS/EN ISO 15548-1/AC:2010 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
DS/EN ISO 15548-1:2008 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
DS/EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

Institute of Electrical and Electronics Engineers (IEEE), Salt Tester

IEEE/ANSI N42.23-1996 Measurement and associated instrumentation quality assurance for radioassay laboratories

Lithuanian Standards Office , Salt Tester

LST EN ISO 15548-1:2014 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2013)
LST EN 12668-1-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments

BR-ABNT, Salt Tester

ABNT P-MB-319-1963

交通运输部, Salt Tester

JT/T 1325-2020 Technical requirements and inspection methods for driving temperature recorders

European Committee for Electrotechnical Standardization（CENELEC）, Salt Tester

EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing

AENOR, Salt Tester

UNE-EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments

中华人民共和国国家卫生和计划生育委员会, Salt Tester

GB 12374-1990 Standard method for the examination of nitrate in the atmosphere of residential areas

Professional Standard - Aviation, Salt Tester

HB 6783.9-1993 Military airborne equipment climate environment test chamber (room) verification method Salt spray test chamber (room)

IT-UNI, Salt Tester

UNI EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments

ES-UNE, Salt Tester

UNE-EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)

VE-FONDONORMA, Salt Tester

NORVEN 22-16-1965

国家认证认可监督管理委员会, Salt Tester

RB/T 143-2018 Laboratory Chemical Testing Instruments and Equipment Period Verification Guide

YU-JUS, Salt Tester

JUS F.S2.242-1984 Cotton fibres. Test method for braaking strength. Pretsley apparatus

Xinjiang Provincial Standard of the People's Republic of China, Salt Tester

DB65/T 3920-2016 Cotton quality instrumentation notarization inspection laboratory construction and management specifications

Professional Standard - Navy, Salt Tester

HJB 324.32-2006 Part 32 of the Metrology and Verification Regulations for Russian Submarine Weapons Test Equipment: БПЗO Tester

Professional Standard - Public Safety Standards, Salt Tester

GA/T 1946-2021 Forensic Science Hydrochloric, Sulfuric and Nitric Acid Test Chemistry and Ion Chromatography

Professional Standard - Urban Construction, Salt Tester

CJ 26.11-1991 Municipal sewage water quality inspection method standard sulfate gravimetric method

未注明发布机构, Salt Tester

BS 6392-9:1983(2011) Testing of ethanol for industrial use — Part 9 : Method for determination of permanganate time