ZH
RU
ES

Usually used in conductivity measurement

Usually used in conductivity measurement, Total:237 items.

In the international standard classification, Usually used in conductivity measurement involves: Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Geology. Meteorology. Hydrology, Corrosion of metals, Measurement of fluid flow, Linear and angular measurements, Mechanical testing, Radiation measurements, Environmental testing, Protection against fire, Electrical wires and cables, Construction materials, Electrical engineering in general, Medical equipment, Surface treatment and coating, Nuclear energy engineering, Testing of metals, Non-ferrous metals, Rubber and plastics products, Radiocommunications, Reinforced plastics, Water quality, Solar energy engineering, Education, Semiconducting materials, Aerospace electric equipment and systems, Electronic components in general, Wastes, Components for electrical equipment, Components and accessories for telecommunications equipment, Electrical and electronic testing, Interface and interconnection equipment.

Japanese Industrial Standards Committee (JISC), Usually used in conductivity measurement

JIS K 0130:2008 General rules for electrical conductivity measuring method
JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity

American Society for Testing and Materials (ASTM), Usually used in conductivity measurement

ASTM D7449/D7449M-08e1 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM D7449/D7449M-08 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM E1698-95(2005) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM G3-13 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM D5568-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
ASTM G3-14 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM G3-89(2004) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM E1698-95(2010) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
ASTM ISO/ASTM 51631-13 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM 51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM D7449/D7449M-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM D7449/D7449M-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5084-16 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D3985-95 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D3985-02 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D3985-05(2010)e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM UOP975-02 Fluorine in Liquid Hydrocarbons and LPG by Oxidative Combustion with Ion-Selective Electrode Detection
ASTM F1467-99 Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
ASTM F1467-99(2005) Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5904-02 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5904-02(2009) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D6842-02 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6842-02e1 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6842-02(2007) Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making

International Organization for Standardization (ISO), Usually used in conductivity measurement

ISO 6817:1992 Measurement of conductive liquid flow in closed conduits; method using electromagnetic flowmeters
ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO/PRF 22804 Marine technology — General technical requirement of marine Conductivity-Temperature-Depth (CTD) measuring instrument
ISO 22804:2023 Marine technology — General technical requirement of marine conductivity-temperature-depth (CTD) measuring instrument
ISO 3966:2020 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
ISO 11127-6:2022 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond

Danish Standards Foundation, Usually used in conductivity measurement

DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DS/EN 61674/A1:2002 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
DS/EN 61674:2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
DS/EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
DS/EN 62220-1-3:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
DS/EN 60835-3-6:1997 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High power amplifiers
DS/EN 60835-1-1:1995 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General
DS/EN 62220-1-2:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography

未注明发布机构, Usually used in conductivity measurement

BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
BS EN 50561-1:2013(2015) Power line communication apparatus used in low - voltage installations — Radio disturbance characteristics — Limits and methods of measurement Part 1 : Apparatus for in - home use
BS EN 62153-1-1:2004(2006) Metallic communication cables test methods — Part 1 - 1 : Electrical — Measurement of the pulse / step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Usually used in conductivity measurement

GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
GB/T 19629-2005 Medical Electrical equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging

Association Francaise de Normalisation, Usually used in conductivity measurement

NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
NF EN 16813:2016 Projection thermique - Mesurage de la conductivité électrique des revêtements métalliques non ferreux obtenus par projection thermique, à l'aide de la méthode par courants de Foucault
NF EN 60754-2/A1:2020 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
NF EN 60754-2:2014 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
NF C32-074-2/A1*NF EN 60754-2/A1:2020 Test on gases evolved during combustion of materials from cables - Part 2 : determination of acidity (by pH measurement) and conductivity
NF EN 60510-2-5:1994 Méthodes de mesure pour les équipements radioélectriques utilisés dans les stations terriennes de télécommunication par satellites - Partie 2 : mesures sur les sous-ensembles section cinq : modulateurs de fréquence.
NF EN IEC 60749-39:2022 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 39 : mesure de la diffusivité d'humidité et de l'hydrosolubilité dans les matériaux organiques utilisés dans les composants à semiconducteurs
NF EN 60510-2-6:1994 Méthodes de mesure pour les équipements radioélectriques utilisés dans les stations terriennes de télécommunication par satellites - Partie 2 : mesures sur les sous-ensembles section six : démodulateurs de fréquence.
NF C74-204*NF EN 61674:2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
NF EN 50561-1:2014 Appareils de communication par courant porteur utilisés dans les installations basse tension - Caractéristiques de perturbations radioélectriques - Limites et méthodes de mesure - Partie 1 : appareillage pour usage intérieur
NF C74-220-1-1*NF EN 62220-1-1:2015 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1 : determination of the detective quantum efficiency - Detectors used in radiographic imaging
NF EN 62220-1-3:2008 Appareils électromédicaux - Caractéristiques des dispositifs d'imagerie numérique à rayonnement X - Partie 1-3 : détermination de l'efficacité quantique de détection - Détecteurs utilisés en imagerie dynamique
NF EN 62220-1-1:2015 Appareils électromédicaux - Caractéristiques des dispositifs d'imagerie à rayonnements X - Partie 1-1 : détermination de l'efficacité quantique de détection - Détecteurs utilisés en imagerie radiographique
NF EN 62788-1-2:2016 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-2 : encapsulants - Mesurage de la résistivité transversale des encapsulants photovoltaïques et autres matériaux polymères
NF EN 60512-99-001:2013 Connecteurs pour équipements électroniques - Essais et mesures - Partie 99-001 : programme d'essai relatif aux connexions et déconnexions sous charge électrique - Essai 99a : connecteurs utilisés dans le câblage de communication à paires torsad...
NF C90-301-4*NF EN 60835-1-4:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1 : measurements common to terrestrial radio-realy systems and satellite earth stations. Section 4 : transmission performance.
NF EN 62220-1-2:2007 Appareils électromédicaux - Caractéristiques des dispositifs d'imagerie numérique à rayonnement X - Partie 1-2 : détermination de l'efficacité quantique de détection - Détecteurs utilisés en mammographie
NF EN 62153-1-1:2004 Méthodes d'essai des câbles métalliques de communication - Partie 1-1 : électrique - Mesure de la perte par réflexions à une impulsion/échelon dans le domaine fréquentiel en utilisant la Transformée Inverse de Fourier Discrète (TIFD)

German Institute for Standardization, Usually used in conductivity measurement

DIN 51111:2023-04 Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (<epsilon><(Index)r>) and the dielectric dissipation factor (tan <delta>) /...
DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DIN EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011); German version
DIN EN 61674:2015-11 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging (IEC 61674:2012); German version EN 61674:2013
DIN EN 62220-1-3:2011-04 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging (IEC 62220-1-3:2008); German version EN 62220-1-3:2008
DIN 50450-2:1991-03 Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of oxygen impurity in N<(Index)2>, Ar, He, Ne and H<(Index)2> by using a galvanic cell
DIN EN IEC 61674:2023-03 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging (IEC/CDV 61674:2023); German and English version prEN IEC 61674:2023 / Note: Date of issue 2023-02-17*Intended as repl...
DIN EN 62220-1-1:2021-11 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging (IEC 62220-1-1:2015); German version EN 62220-1-1:2015
DIN IEC/TS 62850:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children (IEC/TS 62850:2013)
DIN 50451-3:2014 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Determination of 31 elements in high-purity nitric acid by ICP-MS
DIN EN 62220-1-2:2009-02 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography (IEC 62220-1-2:2007); German version EN 62220-1-2:2007
DIN EN 60835-1-1:1993-09 Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section one: general (IEC 60835-1-1:1990); German version EN 60835-1...
DIN EN 60835-1-4:1995-04 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: Transmission performance (IEC 60835-1-4:1992); German ve...
DIN EN 60835-1-2:1993-12 Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 2: basic characteristics (IEC 60835-1-2:1992); German versio...
DIN EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-3: Procedures; determination of degree of acidity of gases for cables by determination of the weighted average of pH and condu
DIN EN 62153-1-1:2004-09 Metallic communication cables test methods - Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) (IEC 62153-1-1:2003); German version EN 62153-1-1:2004
DIN EN 60444-4:1997-10 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency f<(Index)L>, load resonance resistance R<(Index)L> and the calculation of other deriv...
DIN EN 60835-1-2/A1:1995-08 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 2: basic characteristics (IEC 60835-1-2:1992/A1:1995); Germ...
DIN EN 60835-1-3:1995-04 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: Transmission characteristics (IEC 60835-1-3:1992); Germa...
DIN EN 60835-1-3/A1:1996-02 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: Transmission characteristics (IEC 60835-1-3:1992/A1:1995...
DIN EN 60835-1-4/A1:1996-02 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: Transmission performance (IEC 60835-1-4:1992/A1:1995); G...

British Standards Institution (BSI), Usually used in conductivity measurement

BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS EN 60754-2:2014+A1:2020 Test on gases evolved during combustion of materials from cables - Determination of acidity (by pH measurement) and conductivity
BS ISO 22804:2023 Marine technology. General technical requirement of marine conductivity-temperature-depth (CTD) measuring instrument
16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
22/30400308 DC BS ISO 22804. Marine technology. General technical requirement of marine. Conductivity-Temperature-Depth (CTD) measuring instrument
18/30377712 DC BS EN 60754-2 AMD1. Test on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
BS EN 60835-3-6:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. High-power amplifiers
BS EN 60835-1-1:1994 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. General
BS EN 60835-1-2:1995 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. Basic characteristics
BS EN 60835-1-4:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. Transmission performance
BS EN 60835-1-3:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. Transmission characteristics
BS EN 60835-3-10:1995 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Terminal equipment. TDMA traffic earth station
BS EN 60835-3-11:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Service channel equipment for SCPC-PSK transmission

ES-UNE, Usually used in conductivity measurement

UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
UNE-EN 60754-2:2014/A1:2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
UNE-EN 61674:2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging (Endorsed by AENOR in April of 2013.)
UNE-EN 60835-1-1:1992 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 1: MEASUREMENT COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS. SECTION ONE: GENERAL. (Endorsed by AENOR in May of 1995.)
UNE-EN 50561-1:2014/AC:2015 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
UNE-EN 62220-1-1:2015 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging (Endorsed by AENOR in July of 2015.)
UNE-EN 62153-1-1:2004 Metallic communication cables test methods -- Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) (Endorsed by AENOR in May of 2004.)

European Committee for Standardization (CEN), Usually used in conductivity measurement

EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
EN ISO 6817:1995 Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters ISO 6817: 1992
HD 477.2.4 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 4: frequency modulators
HD 477.2.5 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 5: frequency demodulators
EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
HD 477.2.2 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 2: stand-by channel switching equipment

RU-GOST R, Usually used in conductivity measurement

GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
GOST R 57928-2017 Polymer composites. Method of determining the rate of heat release during combustion, using a flow calorimeter, operating on the principle of thermocouple
GOST 8.535-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring power of electromagnetic oscillations in waveguide within frequency range from 78,3 to 178,6
GOST 8.277-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measurement of power of electromagnetic oscillations in waveguides within frequency range from 53,57 up to 78,33 GHz
GOST R IEC 62220-1-2-2010 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1-2. Determination of the detective quantum efficiency. Detectors used in mammography

Lithuanian Standards Office , Usually used in conductivity measurement

LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
LST EN 61674-2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
LST HD 477.1 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 1: Measurements common to sub-systems and simulated radio-relay systems (IEC 60487-1:1984)
LST HD 477.2.5 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 5: Frequency demodulators (IEC 60487-2-5:1984)
LST HD 477.2.4 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 4: Frequency modulators (IEC 60487-2-4:1984)
LST EN 60510-2-6-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section 6: Frequency demodulators (IEC 60510-2-6:1992)
LST EN 60510-2-5-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. Section 5: Frequency modulators (IEC 60510-2-5:1992)
LST EN 50267-2-2-2000 Common test methods for cables under fire conditions. Tests on gases evolved combustion of materials from cables. Part 2-2: Procedures. Determination of degree of acidity of gases for materials by measuring pH and conductivity
LST HD 477.2.6 S1-2002 Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section 6: Diversity, twin-path and hot stand-by equipment (IEC 60487-2-6:1984)
LST EN 60835-1-3+A1-2002 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 3: Transmission characteristics (IEC 60835-1-3:1992)
LST EN 60835-1-2+A1-2002 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 2: Basic characteristics (IEC 60835-1-2:1992)
LST EN 60835-1-1-2002 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements common to terrestrial radio-relay systems and satellites earth stations. Section 1: General (IEC 60835-1-1:1990)
LST EN 60835-1-4+A1-2002 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 4: Transmission performance (IEC 60835-1-4:1992)
LST EN 62220-1-3-2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging (IEC 62220-1-3:2008)
LST EN 60835-3-6-2002 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3: Measurements on satellite earth stations. Section 6: High power amplifiers (IEC 60835-3-6:1996)
LST HD 467.1.2 S1-2002 Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section 2: Measurements in the r.f. range (IEC 60510-1-2:1984)
LST EN 62220-1-2-2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography (IEC 62220-1-2:2007)

AENOR, Usually used in conductivity measurement

UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
UNE-EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
UNE 20711-1:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 1: MEASUREMENTS COMMON TO SUB-SYSTEMS AND SIMULATED RADIO-RELAY SYSTEMS.
UNE 20711-2-4:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION FOUR: FREQUENCY MODULATORS.
UNE 20711-2-5:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION FIVE: FREQUENCY DEMODULATORS.
UNE-EN 62220-1-3:2009 Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
UNE-EN 60835-3-6:1997 METHODS OF MEASURMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 3: MEASUREMENTS ON SATELLITE EARTH STATIONS. SECTION 6: HIGH POWER AMPLIFIERS.
UNE 20711-2-6:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION SIX: DIVERSITY, TWIN-PATH AND HOT STAND-BY EQUIPMENT.
UNE-EN 60835-1-3:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 1: MEASUREMENT COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS. SECTION 3: TRANSMISSION CHARACTERISTICS.
UNE-EN 60835-1-3/A1:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARHT STATIONS. SECTION 3: TRANSMISSION CHARACTERISTICS.
UNE-EN 60835-1-2/A1:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 1: MEASURMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS. SECTION 2: BASIC CHARACTERISTICS.
UNE-EN 60835-1-2:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWARE RADIO TRANSMISSION SYSTEMS. PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS. SECTION 2: BASIC CHARACTERISTICS.
UNE-EN 60835-1-4:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS ANS SATELLITE EARTH STATIONS. SECTION 4: TRANSMISSION PERFORMANCE.
UNE-EN 60835-1-4/A1:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS. SECTION 4: TRANSMISSION PERFORMANCE.
UNE-EN 62788-1-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
UNE-EN 50561-1:2014 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
UNE-EN 62220-1-2:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography.

International Telecommunication Union (ITU), Usually used in conductivity measurement

ITU-T R.5 FRENCH-1993 OBSERVATION CONDITIONS RECOMMENDED FOR ROUTINE DISTORTION MEASUREMENTS ON INTERNATIONAL TELEGRAPH CIRCUITS
ITU-T R.5 SPANISH-1993 OBSERVATION CON DITIONS RECOMMENDED FOR ROUTINE DISTORTION MEASUREMENTS ON INTERNATIONAL TELEGRAPH CIRCUITS
ITU-R S.481-2-1986 Measurement of Noise in Actual Traffic for Systems in the Fixed-Satellite Service for Telephony Using Frequency-Division Multiplex - Section 4C - Earth Station and Baseband Characteristics - Earth Station Antennas - Maintenance of Earth Stations
ITU-R QUESTION 218-1/1-2007 Techniques for measurement of radiation from high data rate telecommunication systems using wired electrical power supply
ITU-R S.1718 SPANISH-2005 Power flux-density values in the band 11.7-12.7 GHz and associated calculation methodology which may be used when the power flux-density values in section 6 of Annex 1 to Appendix 30 of the Radio Regulations are exceeded
ITU-R S.1718 FRENCH-2005 Power flux-density values in the band 11.7-12.7 GHz and associated calculation methodology which may be used when the power flux-density values in section 6 of Annex 1 to Appendix 30 of the Radio Regulations are exceeded
ITU-T J.19-1989 Conventional Test Signal Simulating Sound-Programme Signals for Measuring Interference in Other Channels - Line Transmission of Non-Telephone Signals - Transmission of Sound-Programme and Television Signals (Study Group XV) 4 pp
ITU-R SF.1320-1997 Maximum Allowable Values of Power Flux-Density at the Surface of the Earth Produced by Non-Geostationary Satellites in the Fixed-Satellite Service Used in Feeder Links for the Mobile-Satellite Service and Sharing the Same Frequency Bands with Radio-Relay

American National Standards Institute （ANSI), Usually used in conductivity measurement

ANSI/ASTM D7449:2008 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Transmission Line

YU-JUS, Usually used in conductivity measurement

JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement
JUS N.N6.542-1989 Radiocomminications. Antermas. Hethods of measurement for antennas used in tbe mobile services. Test range
JUS N.N6.541-1989 Radiocomamnications. Antennas. Metbods of measurenent for antennas used in the mobile services. Terms, definitions and test conditions
JUS N.N6.543-1989 Radiocommanications. Antemaas. Method of measurement for antennas used in the mobiJe services. Transfer-standard antenna
JUS N.N6.353-1982 Radiocommunications.Transmitters.Methods of measurements.General conditions of operation and modulation input signal arrangements for measurement of amplitude/frequency characteristics and non-linearity distortion in transmitter for radiotelephony

Standard Association of Australia （SAA）, Usually used in conductivity measurement

AS/NZS IEC 60754.2:2017 Test on gases evolved during combustion of materials from cables, Part 2: Determination of acidity (by pH measurement) and conductivity

IN-BIS, Usually used in conductivity measurement

International Electrotechnical Commission (IEC), Usually used in conductivity measurement

IEC 60754-2:2011/AMD1:2019 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 60754-1:2019 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 60754-2:2011+AMD1:2019 CSV Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 62220-1-1:2015 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging
IEC 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
IEC 60835-1-1:1990 Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section one: general
IEC 60835-1-2:1992 Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 2: basic characteristics
IEC 60835-1-4:1992 Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: transmission performance
IEC 60835-1-3:1992 Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: transmission characteristics
IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1-1: Technical Specification: General requirements for equipment intended for use by children and young people in educational establishments

European Committee for Electrotechnical Standardization（CENELEC）, Usually used in conductivity measurement

EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
EN 61674:2013 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
EN 62220-1-1:2015 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging
EN 62220-1-3:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
EN 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
EN 50561-1:2013 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
HD 602 S1-1992 Test on Gases Evolved During Combustion of Materials from Cables Determination of Degree of Acidity (Corrosivity) of Gases by Measuring pH and Conductivity

AT-OVE/ON, Usually used in conductivity measurement

OVE EN 60754-2-2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (german version)

NZ-SNZ, Usually used in conductivity measurement

AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Usually used in conductivity measurement

JEDEC JESD22-A120B-2014 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Electronic Devices

Korean Agency for Technology and Standards (KATS), Usually used in conductivity measurement

KS B ISO TS 15768:2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS C IEC 60568:2009 In-core instrumentation for neutron fluence rate(flux) measurements in power reactor
KS M ISO 11127-6:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond
KS C IEC 62220-1-2:2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-2: Determination of the detective quantum efficiency — Detectors used in mammography
KS C IEC 62220-1-3:2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-3: Determination of the detective quantum efficiency — Detectors used in dynamic imaging
KS C IEC 62025-1:2018 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
KS C IEC 62153-1-1:2014 Metallic communication cables test methods — Part 1-1: Electrical — Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation(IDFT)
KS C IEC 62153-1-1-2014(2019) Metallic communication cables test methods — Part 1-1: Electrical — Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation(IDFT)

KR-KS, Usually used in conductivity measurement

KS B ISO TS 15768-2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS M ISO 11127-6-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond
KS C IEC 62220-1-2-2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-2: Determination of the detective quantum efficiency — Detectors used in mammography
KS C IEC 62220-1-3-2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-3: Determination of the detective quantum efficiency — Detectors used in dynamic imaging
KS C IEC 62025-1-2018 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment

AT-ON, Usually used in conductivity measurement

ONORM E 3654-1993 Test on gases evolved during the combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity (IEC 754-2:1991, modified)

TIA - Telecommunications Industry Association, Usually used in conductivity measurement

TIA-455-53A-1990 FOTP-53 Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications Systems
TIA/EIA-455-53A-1990 FOTP-53 Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications Systems (Revision of EIA-455-53)

PT-IPQ, Usually used in conductivity measurement

NP 2862-1985
NP 2847/3-1985
NP 2865-1985
NP 2863-1985
NP EN ISO 11127-6:2001 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 6:Determination of water-soluble contaminats by conductivity measurement(ISO 11127-6:1993)

CENELEC - European Committee for Electrotechnical Standardization, Usually used in conductivity measurement

PREN 50561-2-2015 Powerline communication apparatus used in low voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Apparatus for access-network use
EN 50561-1:2013/FPRAA:2019 Powerline communication apparatus used in low voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
EN 50561-1:2013/FPRA2:2018 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use

SE-SIS, Usually used in conductivity measurement

SIS SS-IEC 1031:1991 Nuclear instrumentation — Design, location and application criteriaforinstalled area gamma radiation dose r?te monitoring equipmentfor use in nuclearpowerplants during normal operation and anticipated operational occurences

TR-TSE, Usually used in conductivity measurement

TS 2920-1978 Methods Of Measurement For Radio Equipment Used In The Mobile Services Part 7 : Privacy Equipment Supplementary Definitions

European Association of Aerospace Industries, Usually used in conductivity measurement

AECMA PREN 2004-7-1996 Aerospace Series Test Methods for Aluminium and Aluminium Alloy Products Part 7 : Reference Blocks for the Calibration of Measuring Equipment Used in the Determination of Electrical Conductivity of Wrought Aluminium and Aluminium Alloys Edition P 1

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Usually used in conductivity measurement

ITU-R SF.358-4-1993 Maximum Permissible Values of Power Flux-Density at the Surface of the Earth Produced by Satellites in the Fixed-Satellite Service Using the Same Frequency Bands Above 1 GHz as Line-of- Sight Radio-Relay Systems
ITU-R SF.358-3-1982 Maximum Permissible Values of Power Flux-Density at the Surface of the Earth Produced by Satellites in the Fixed-Satellite Service Using the Same Frequency Bands Above 1 GHz as Line-of- Sight Radio-Relay Systems - Section 4/9A - Sharing Conditions

(U.S.) Telecommunications Industries Association , Usually used in conductivity measurement

TIA-526-2-A-2015 Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable- Adoption of IEC 61280-1-1 ed.2 Part 1-1: Test Procedures for General Communication Subsystems- Transmitter Output Measurement for Single-Mode Optical Fibre Cable

ZA-SANS, Usually used in conductivity measurement

SANS 301277:2005 Fixed Radio Systems; Point-to-point equipment; High capacity digital radio systems transmitting STM-4 or 4 x STM-1 in a 40 MHz radio frequency channel using Co-Channel Dual Polarized (CCDP) operation