ZH
RU
ES

Carbon Carbon Characterization

Carbon Carbon Characterization, Total:258 items.

In the international standard classification, Carbon Carbon Characterization involves: Test conditions and procedures in general, Physics. Chemistry, Construction materials, Wastes, Analytical chemistry, Horology, Optics and optical measurements, Testing of metals, Materials for aerospace construction, Inorganic chemicals, Iron and steel products, Astronomy. Geodesy. Geography, Rubber and plastics products, Metrology and measurement in general, Powder metallurgy, Resistors, Electricity. Magnetism. Electrical and magnetic measurements, Products of the chemical industry, Air quality, Materials for the reinforcement of composites, Power transmission and distribution networks, Semiconducting materials, Environmental protection, Protection against fire, Vocabularies, Rubber, Surface treatment and coating, Water quality, Insulating materials, Non-ferrous metals, Raw materials for rubber and plastics, Bottles. Pots. Jars, Reinforced plastics, Organic chemicals, Products of non-ferrous metals.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Carbon Carbon Characterization

GB/T 33243-2016 Nanotechnologies.Characterization of multiwall carbon nanotube(MWCNT)
GB/T 32871-2016 Characterization of single-walled carbon nanotubes by Raman spectroscopy
GB/T 32868-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using thermogravimetric analysis
GB/T 30543-2014 Nanotechnologies.Characterization of single-wall carbon nanotubes using transmission electron microscopy
GB/T 29856-2013 Characterization of semiconducting single-walled carbon nanotubes using near infrared photoluminescence spectroscopy
GB/T 42419-2023 Surface Carbon Verification Technical Regulations
GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
GB/T 42902-2023 Laser Scattering Method for Testing Surface Defects of Silicon Carbide Epitaxial Wafers
GB/T 2596-1981 Tungsten powder and tungsten carbide powder--Determination of specific surface product(average graininess)--Simplified nitrogen absorption method

International Organization for Standardization (ISO), Carbon Carbon Characterization

ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
ISO/TS 11308:2020 Nanotechnologies — Characterization of carbon nanotube samples using thermogravimetric analysis
ISO/TS 11931:2012 Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement
ISO 12039:2001 Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems
ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
ISO/CD 27927:2011 Carbon dioxide capture, transportation and geological storage — Key performance parameters and characterization methods of absorption liquids for post-combustion CO2 capture
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 12985-1:2000 Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method
ISO 12985-1:2018 Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method
ISO 4507:1978 Sintered ferrous materials, carburized or carbonitrided; Determination and verification of effective case depth by the Vickers microhardness testing method
ISO/TS 11251:2019 Nanotechnologies — Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
ISO/DIS 8060:2023 Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
ISO 12985-2:2000 Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method
ISO 12985-2:2018 Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method
ISO/TS 10867:2019 Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO 2197:1972 Sodium hydrogen carbonate for industrial use; List of methods of test and preparation of the test sample
ISO 6997:1985 Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method
ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

Danish Standards Foundation, Carbon Carbon Characterization

DS/ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
DS/ISO/TS 11308:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
DS/ISO/TS 11888:2012 Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors
DS/EN 14345:2005 Characterization of waste - Determination of hydrocarbon content by gravimetry
DS/ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
DS/EN 13137:2001 Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
DS/ISO/TS 10867:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
DS/EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
DS/ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
DS/ISO 12039:2001 Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
DS/ISO/TS 11251:2011 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
DS/EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
DS/EN 15543/AC:2009 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
DS/EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
DS/EN 723:2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

Association Francaise de Normalisation, Carbon Carbon Characterization

XP T16-208*XP ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
XP ISO/TR 10929:2012 Nanotechnologies - Caractérisation des échantillons de nanotubes de carbone multifeuillets (NWCNTs)
NF EN 14345:2004 Caractérisation des déchets - Détermination de la teneur en hydrocarbures par gravimétrie
XP ISO/TS 11888:2017 Nanotechnologies - Caractérisation des nanotubes en carbone multicouches - Facteurs de forme mésoscopique
FD T16-209:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
XP T16-200*XP ISO/TS 10867:2020 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
XP ISO/TS 10867:2020 Nanotechnologies - Caractérisation de nanotubes de carbone monofeuillet en utilisant la spectroscopie de photoluminescence dans le proche infra-rouge
FD U44-163:2018 Soil improvers and growing media - Characterization of organic matter by potential mineralization of carbon and nitrogen
NF EN 14039:2005 Caractérisation des déchets - Détermination de la teneur en hydrocarbures par chromatographie en phase gazeuse dans la plage C10 à C40
NF T71-600:2023 Matériels de lutte contre la pollution des eaux par des hydrocarbures - Bacs de stockage temporaires d'hydrocarbure - Fiche technique
NF A95-186-4*NF EN ISO 4499-4:2017 Hardmetals - Metallographic determination of microstructure - Part 4 : characterisation of porosity, carbon defects and eta-phase content
NF EN ISO 4499-4:2017 Métaux-durs - Détermination métallographique de la microstructure - Partie 4 : caractérisation de la porosité, des défauts carbone et de la teneur en phase êta
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF T45-151:1988 Rubber compounding ingredients. Carbon black (pelletized). Determination of apparent density.
NF A95-348*NF EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
NF A95-321-2:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2 : case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen.
NF X30-404:2001 Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments.
NF L06-834:2007 Aerospace series - Metallic parts - Inducement compressive surface stresses - Tungsten carbide spherical beads
NF T20-524:1973 Sodium and potassium silicates for industrial use. Determination of carbon dioxide content expressed as sodium or potassium carbonate. Gas-volumetric method.

British Standards Institution (BSI), Carbon Carbon Characterization

PD ISO/TR 10929:2012 Nanotechnologies. Characterization of multiwall carbon nanotube (MWCNT) samples
PD ISO/TS 11308:2020 Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
PD ISO/TR 23463:2022 Nanotechnologies. Characterization of carbon nanotube and carbon nanofiber aerosols in relation to inhalation toxicity tests
PD ISO/TS 10797:2012 Nanotechnologies. Characterization of single-wall carbon nanotubes using transmission electron microscopy
BS PD ISO/TS 11308:2020 Tracked Changes. Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
PD ISO/TS 10867:2019 Nanotechnologies. Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
PD ISO/TS 11888:2017 Tracked Changes. Nanotechnologies. Characterization of multiwall carbon nanotubes. Mesoscopic shape factors
BS 4S 14:1964+A2:2015 Specification for Carbon case-hardening steel
BS EN ISO 4499-4:2016 Hardmetals. Metallographic determination of microstructure. Characterisation of porosity, carbon defects and eta-phase content
BS 4S 14:1964 Specification for aircraft material - Carbon case-hardening steel
4S 14-1964 Specification for aircraft material. Carbon case-hardening steel
BS DD ISO/TS 80004-3:2010 Nanotechnologies - Vocabulary - Carbon nano-objects
BS EN 3656:2022 Aerospace series. Polycarbonate, self-extinguishing, low smoke emission. Characteristics
PD ISO/TS 10868:2017 Tracked Changes. Nanotechnologies. Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
20/30411833 DC BS EN 17505. Soil and waste characterization. Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 12039:2019 Stationary source emissions. Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas. Performance characteristics of automated measuring systems
BS ISO 12985-1:2018 Carbonaceous materials used in the production of aluminium. Baked anodes and cathode blocks. Determination of apparent density using a dimensions method
PD ISO/TS 11251:2019 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
BS EN ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
BS EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 12985-2:2018 Carbonaceous materials used in the production of aluminium. Baked anodes and cathode blocks. Determination of apparent density and of open porosity using a hydrostatic method
23/30442752 DC BS ISO 8060. Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Characterization of durability of adhesive interfaces by wedge rupture test
BS ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
BS ISO 4652:2020 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS 6069 Sec.4.1:1990 Characterization of air quality. Stationary source emissions. Method for the determination of the mass concentration of sulphur dioxide: hydrogen peroxide/barium perchlorate/Thorin method
BS 6043-3.3:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method

API - American Petroleum Institute, Carbon Carbon Characterization

API TDB CHAPTER 2-1997 Technical Data Book Chapter 2 - Characterization of Hydrocarbons
API DR2-66-1965 DOCUMENTATION OF THE BASIS FOR SELECTION OF THE CONTENTS OF CHAPTER 2 - CHARACTERIZATION OF HYDROCARBONS IN TECHNICAL DATA BOOK - PETROLEUM REFINING
API PUBL 2216-1991 Ignition Risk of Hydrocarbon Vapors by Hot Surfaces in the Open Air (Second Edition)

GOSTR, Carbon Carbon Characterization

PNST 307-2018 Nanotechnologies. Single-wall carbon nanotubes. Characterization using thermogravimetric analysis
PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry
PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry

German Institute for Standardization, Carbon Carbon Characterization

DIN EN 14345:2004-12 Characterization of waste - Determination of hydrocarbon content by gravimetry; German version EN 14345:2004
DIN EN 17505:2022-08 Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900); German and English version prEN 17505:2022 / Note: Date of issue 2022-07-08*Intended as replacement for DIN 19539 (2016-12).
DIN EN ISO 4499-4:2016-10 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016); German version EN ISO 4499-4:2016
DIN EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)English version of DIN EN ISO 4507:2007-05
DIN EN ISO 4507:2007-05 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000); German version EN ISO 4507:2007
DIN 51916:2013 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 38409-46:2012 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46: Determination of purgeable organic carbon (POC) (H 46)
DIN 38409-46:2012-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46: Determination of purgeable organic carbon (POC) (H 46)
DIN 51916:1987 Testing of carbon materials; determination of apparent density after tamping; solid materials
DIN 51916:2012 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51916:2013-12 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016); German version EN ISO 4499-4:2016

American Society for Testing and Materials (ASTM), Carbon Carbon Characterization

ASTM C831-18 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM C831-98(2008) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM C831-98(2013) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes?
ASTM C831-98(2017) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes&x2009;
ASTM C831-98(2017)e1 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes&x2009;
ASTM C831-98 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM C831-98(2003) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM D6556-16 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM D2854-96(2000) Standard Test Method for Apparent Density of Activated Carbon
ASTM D2854-96(2004) Standard Test Method for Apparent Density of Activated Carbon
ASTM E2656-10 Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
ASTM D3765-99 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

Lithuanian Standards Office , Carbon Carbon Characterization

LST EN 14345-2004 Characterization of waste - Determination of hydrocarbon content by gravimetry
LST EN 13137-2002 Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
LST EN 14039-2004 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
LST EN 15543-2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
LST EN 15543-2008/AC-2009 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
LST EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
LST EN 723-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

AENOR, Carbon Carbon Characterization

UNE-EN 14345:2005 Characterization of waste - Determination of hydrocarbon content by gravimetry
UNE-EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
UNE 77229:2004 Stationary source emissions. Determination of carbon monoxide, carbon dioxide and oxygen. Performance characteristics and calibration of automated measuring systems.
UNE-EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
UNE-EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
UNE-EN 723:2010 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

国家市场监督管理总局、中国国家标准化管理委员会, Carbon Carbon Characterization

GB/T 40568-2021 Nanotechnologies—Characterization of multiwall carbon nanotubes—Mesoscopic shape factors
GB/T 37225-2018 Nanotechnology—Characterization of multiwall carbon nanotube in aqueous solution—Extinction spectroscopy
GB/T 39114-2020 Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
GB/T 40789-2021 Gas analysis—Online automated measuring systems for content of carbon monoxide , carbon dioxide and oxygen—Determination of performance characteristics

KR-KS, Carbon Carbon Characterization

KS C ISO TS 11888-2023 Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors
KS M ISO 11963-2019 Plastics — Polycarbonate sheets — Type, dimensions and characteristics
KS M ISO 2197-2017 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample

GM Europe, Carbon Carbon Characterization

GME QS 341400-2008 Case-hardening Steel (English/German)
GME QS 411900-2008
GME QS 413600-2008 Case-hardening Steel (English/German)
GME QS 862000-2008 Case-hardening Steel (English/German)
GME QS 191600-2008 Case-hardening Steel (English/German)
GME QS 192000-2008
GME QS 192700-2008

Professional Standard - Light Industry, Carbon Carbon Characterization

QB/T 5174-2017 High-carbon steel strips for watches
QB/T 2272-2007 Y100Pb Free-cutting high-carbon steel bars for watches
QB/T 2272-1996 Y100Pb high-carbon lead free-cutting steel bar for watch

PH-BPS, Carbon Carbon Characterization

PNS ISO/TS 11308:2021 Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis

Professional Standard - Machinery, Carbon Carbon Characterization

JB/T 6141.4-1992 Heavy-duty gears Metallurgical determination method of carbon content of carburized surface
JB/T 6831-1993 Carbon fiber pointer for electric measuring instrument

AGMA - American Gear Manufacturers Association, Carbon Carbon Characterization

2000FTM2-2000 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears
98FTM9-1998 Studies on Improvement of Surface Durability of Case-Carburized Steel Gear - Effects of Surface Finish Processes upon Oil Film Formation

American Gear Manufacturers Association, Carbon Carbon Characterization

AGMA 2000FTM2-2000 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears

Professional Standard - Petroleum, Carbon Carbon Characterization

SY/T 6110-2002 The description of exploitation geologic characteristics for carbonate gas reservoir
SY/T 6165-1995 Geological Characteristic Description Method of Carbonate Reservoir
SY/T 5355-2000 The demand of oil reservoir geology character description technology carbonate buried hill reservoir portion

IN-BIS, Carbon Carbon Characterization

Society of Automotive Engineers (SAE), Carbon Carbon Characterization

SAE J1975-1997 Case Hardenability of Carburized Steels
SAE AMS6387B-2013 Steel, Carbon, Laminated Sheet, Surface Bonded
SAE AMS6387-2003 Steel, Carbon, Laminated Sheet, Surface Bonded
SAE AMS6387A-2008 Steel, Carbon, Laminated Sheet, Surface Bonded
SAE AMS7301H-2003 Steel, Highly-Stressed Springs 0.95Cr 0.2V (0.48-0.53C) (SAE 6150) Case Hardened
SAE AMS7301H-2009 Steel, Highly-Stressed Springs, 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150), Case Hardened

SAE - SAE International, Carbon Carbon Characterization

SAE J1975-1991 Case Hardenability of Carburized Steels@ Information Report
SAE AMS6387C-2018 Steel@ Carbon@ Laminated Sheet@ Surface Bonded

Korean Agency for Technology and Standards (KATS), Carbon Carbon Characterization

KS M ISO 11963:2019 Plastics — Polycarbonate sheets — Type, dimensions and characteristics
KS C 6370-1995(2000) FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS C 6370-1990 FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS I ISO 12039:2006 Stationary source emissions－Determination of carbon monoxide, carbon dioxide and oxygen－Performance characteristics and calibration of automated measuring systems
KS D ISO 10384:2002 Hot-rolled carbon steel sheet as defined by chemical composition
KS D ISO 10384:2013 Hot-rolled carbon steel sheet as defined by chemical composition
KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
KS D ISO 4518:2012 Metallic coatings-Measurement of coating thickness-Profilometric method
KS D ISO 4507-2004(2019) Sintered ferrous materials, carburized or carbonitrided -Determination and verification of case hardening depth by a micro hardness test
KS M ISO 2197-2017(2022) Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
KS M ISO 2197:2002 Sodium hydrogen carbonate for industrial use－List of methods of test and preparation of the test sample
KS M ISO 2197:2017 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
KS C 6054-1992(1997) FIXED CARBON FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT (FORM 27, CHARACTERISTIC D AND G,GRADE C)
KS M ISO 6997:2003 Carbonaceous materials for the production of aluminium-Calcined coke-Determination of apparent oil content-Heating method
KS M ISO 6997:2013 Carbonaceous materials for the production of aluminium－Calcined coke－Determination of apparent oil content－Heating method

International Federation of Trucks and Engines, Carbon Carbon Characterization

NAVISTAR CEMS A-40 SEC A-2014 VOID - Case Hardened Iron and Steel Parts - Carburizing and Carbonitriding (Includes Appendix)

Group Standards of the People's Republic of China, Carbon Carbon Characterization

T/SZZX 005-2019 Carbon fiber composites watch cases
T/CI 120-2022 Evaluation of carbon fiber surface modificated using nanomaterial
T/SMA 0040-2023 Carbon emission accounting method of electricity meters in service
T/IAWBS 002-2017 Test method for surface defect of silicon carbide epitaxial wafer

工业和信息化部, Carbon Carbon Characterization

QB/T 2272-2019 Y100Pb easy cutting high carbon steel rod for table use

RU-GOST R, Carbon Carbon Characterization

PNST 534-2021 Space systems. Carbon-carbon and ceramic matrix composites. Classification and list of properties
PNST 532-2021 Space systems. Carbon-carbon and ceramic matrix composites. Determination of apparent density and of open porosity
GOST R ISO 12039-2011 Stationary source emissions. Determination of carbon monoxide, carbon dioxide and oxygen. Performance characteristics and calibration of automated measuring systems
GOST 25699.4-1990 Carbon black for rubber industry. Method for determination of specific surface area by inert gas adsorption

Guangdong Provincial Standard of the People's Republic of China, Carbon Carbon Characterization

DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy

Japanese Industrial Standards Committee (JISC), Carbon Carbon Characterization

JIS K 6735:2014 Plastics.Polycarbonate sheets.Types, dimensions and characteristics

International Truck and Engine Corporation (ITEC), Carbon Carbon Characterization

INTERN CEMS A-40-2008 Case Hardened Iron And Steel Parts ?Carburizing and Carbonitriding Includes Appendix

Defense Logistics Agency, Carbon Carbon Characterization

DLA MIL-S-11713 C VALID NOTICE 2-2007 Steel Strip, Carbon, Spring: for Mechanical Time Fuze Components
DLA MIL-S-11713C (1)-2002 STEEL STRIP, CARBON, SPRING: FOR MECHANICAL TIME FUZE COMPONENTS
DLA MIL-S-11713C VALID NOTICE 1-1988 STEEL STRIP, CARBON, SPRING: FOR MECHANICAL TIME FUZE COMPONENTS
DLA MIL-S-11713C-1983 STEEL STRIP, CARBON, SPRING: FOR MECHANICAL TIME FUZE COMPONENTS

TR-TSE, Carbon Carbon Characterization

TS 779-1969 SODIUM CARBONATE FOR INDUSTRIAL USE EXPRESSION OF TEST RESULTS
TS 1144-1973 SODIUM HYDROXIDE AND POTASSIUM HYDROXCDE FOR INDUSTRIAL USE DETERMIN A.TION OF THE CARBON DK>XIDE CONTENT EXPRESSED AS SODIUMOR POTASSIUM CARBONATE GAS - VOLUMETRIC METHOD
TS 2052-1975 SODIUM HYDROGEN CARBONATE FOR INDUSTRIAL USE — LIST OF METHODS OF TEST AND PREPARATION OF THE TEST SAMPLE

Professional Standard - Ferrous Metallurgy, Carbon Carbon Characterization

YB/T 5061-2007 Cold-rolled carbon tool steel strips for wristwatch
YB/T 5061-1993 Carbon tool steel cold-rolled strip for watches

(U.S.) Ford Automotive Standards, Carbon Carbon Characterization

FORD FLTM BZ 002-3-2001 DETERMINATION OF THE QUANTITY OF CARBON CONTAMINATION ON COLD ROLLED STEEL SURFACES
FORD FLTM BZ 002-03-2001 DETERMINATION OF THE QUANTITY OF CARBON CONTAMINATION ON COLD ROLLED STEEL SURFACES
FORD WD950 APPENDIX A-1993 MATERIAL AND PERFORMANCE REQUIREMENTS FOR CASE HARDENED CARBON STEEL THREAD CUTTING SCREWS - TYPE D
FORD FLTM BU 101-07-2000 DETERMINATION OF SHEAR ADHESION OF POLYCARBONATE FILM INSTRUMENT DIAL APPLIQUES

European Committee for Standardization (CEN), Carbon Carbon Characterization

EN 723:1996 Copper and Copper Alloys - Combustion Method for Determination of Carbon on the Inner Surface of Copper Tubes or Fittings
prEN 723-1992 Wrought copper; combustion methods for determination of surface carbon on tubes
PD EN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects
EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity@ carbon defects and eta-phase content
EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
EN 15543:2008/AC:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
EN 12915-1:2003 Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon Incorporating corrigendum: May 2006 [Superseded: CEN EN 12915]
EN 12915-2:2003 Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 2: Reactivated granular activated carbon Incorporating corrigendum May 2006 [Superseded: CEN EN 12915]
EN 1018:2006 Chemicals used for treatment of water intended for human consumption - Calcium carbonate Incorporating corrigendum November 2009

ES-UNE, Carbon Carbon Characterization

UNE-EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016)
UNE-EN 15543:2008 ERRATUM:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

RO-ASRO, Carbon Carbon Characterization

STAS 8581-1970 SURFACE AND WASTE WATERS Carbon disulfide determination
STAS 8911-1971 SURFACE AND WASTE WATERS Determination of total carbon dioxide
STAS SR 13408-1998 Surface active agents - Detergents - Determination of carbonate content
SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen

ISUZU - Isuzu Motors Ltd., Carbon Carbon Characterization

ISC-F11-006-1987 Method of Surface Temper Etch Inspection After Grinding for Carburizing of Carbo-Nitriding Treatment Gear (Japanese/English Version)

Standard Association of Australia （SAA）, Carbon Carbon Characterization

AS 2122.3:1993 Combustion characteristics of plastics - Determination of smoke-release - Cellular polyurethanes and polyisocyanurates

国家石油和化学工业局, Carbon Carbon Characterization

SY/T 5355-1999 Reservoir geological characteristics description technical requirements carbonate buried hill reservoir part

American Water Works Association (AWWA), Carbon Carbon Characterization

AWWA D100-2007 Welded Carbon Steel Tanks for Water Storage Incorporates Errata

IT-UNI, Carbon Carbon Characterization

YU-JUS, Carbon Carbon Characterization

JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen
JUS H.G8.129-1984 Reagents. Ammonia solution. Determination of carbonate content (as C02)- Turbidimetric method

Professional Standard - Electron, Carbon Carbon Characterization

SJ/T 11504-2015 Test method for measuring surface quality of polished monocrystalline silicon carbide
SJ/T 11503-2015 Test methods for measuring surface roughness of polished monocrystalline silicon carbide wafers

HU-MSZT, Carbon Carbon Characterization

MSZ KGST 1376-1978

未注明发布机构, Carbon Carbon Characterization

BS 1460:1967(1999) Method for Determination of apparent density after compaction of precipitated calcium carbonate
BS EN 15543:2008(2010) Glass packaging — Finishes for bottles — Screw thread finishes for bottles for non - carbonated liquids

European Association of Aerospace Industries, Carbon Carbon Characterization

AECMA PREN 2563-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Test Method - Determination of Apparent Interlaminar Shear Strength Issue P 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Carbon Carbon Characterization

GB/T 33817-2017 Method for determination of the carbon content on the inner surface of copper and copper-alloy tube

GM North America, Carbon Carbon Characterization

GM GM6285M-1989 Low Carbon Hot and Cold Rolled Sheet Steel for Case Hardening Applications

NEMA - National Electrical Manufacturers Association, Carbon Carbon Characterization

NEMA CB-3:1990 Guidelines for Preparation of Material Safety Data Sheets for Carbon and Graphite Products
NEMA HP 100.1-1985 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS

VE-FONDONORMA, Carbon Carbon Characterization

COVENIN 654-1974

BE-NBN, Carbon Carbon Characterization

NBN T 03-482-1988 Carbonaceous materials forthe production of aluminium - Calcined coke - Determination of apparent oil content - Heating method

IX-EU/EC, Carbon Carbon Characterization

(EU) No 2022-1435 Amending Annexes II and IV of Regulation (EC) No 396/2005 of the European Parliament and of the Council with respect to the maximum residue limits for calcium carbonate, carbon dioxide, cyclostrobin and potassium bicarbonate in or on certain agricultural

CZ-CSN, Carbon Carbon Characterization

CSN 68 1150-1994 Testing methods for surfactans and detergents. Determination of the carbonates content

National Association of Corrosion Engineers (NACE), Carbon Carbon Characterization

NACE RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks Item No. 21040
NACE SP0388-2007 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks Item No. 21040

Natural Gas Processor's Association (NGPA), Carbon Carbon Characterization

GPA RR-22-1976 Solubility of Hydrocarbons in Cryogenic LNG and NGL Mixtures; Errata