ZH

RU

ES

Determination principle of oil in water

Determination principle of oil in water, Total:498 items.

In the international standard classification, Determination principle of oil in water involves: Crude petroleum, Petroleum products in general, Water quality, Extraction and processing of petroleum and natural gas, Fuels, PETROLEUM AND RELATED TECHNOLOGIES, Meat, meat products and other animal produce, Geology. Meteorology. Hydrology, Spices and condiments. Food additives, Products of the chemical industry, Pulps, Mining and quarrying, Analytical chemistry, Equipment for petroleum and natural gas industries, Insulating materials, Insulating fluids, Environmental protection, Farming and forestry, Construction materials, Edible oils and fats. Oilseeds, Raw materials for rubber and plastics, Paints and varnishes, Lubricants, industrial oils and related products, Hydraulic fluids, Fishing and fish breeding, Microbiology, Paint ingredients, Food products in general, Fruits. Vegetables, Air quality, Animal feeding stuffs, Leather technology, Wood, sawlogs and sawn timber, Cereals, pulses and derived products, Measurement of volume, mass, density, viscosity, Milk and milk products, Vocabularies, Biology. Botany. Zoology, Metrology and measurement in general, Energy and heat transfer engineering in general, Organic chemicals, Waxes, bituminous materials and other petroleum products, Soil quality. Pedology, Plastics, Road vehicles in general.


General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination principle of oil in water

  • GB/T 6533-2012 Test method for water and sediment in crude oil by the centrifuge method
  • GB/T 6533-1986 Crude petroleum--Determination of water and sediment--Centrifuge method
  • GB 6533-1986 Crude petroleum-Determination of water and sadiment-Centrifuge method
  • GB/T 8929-2006 Crude petroleum.Determination of water.Distillation method
  • GB/T 6532-2012 Test method for salt in crude oils (Potentiometric method)
  • GB/T 25104-2010 Crude oil-automatic determination of water-RF method
  • GB/T 18608-2001 Standard test methods for determination of iron, nickel,sodium,and vanadium in crude oil by atomic absorption spectrometry
  • GB/T 18608-2012 Determination of nickel, vanadium, iron, and sodium in crude oils and residual fuels by flame atomic absorption spectrometry
  • GB/T 12152-2007 Water for boiler and cooling system.Determination of mineral oil
  • GB/T 18612-2001 Determination of organic chloride content in crude oil by combustion and microcoulometry
  • GB/T 8020-2015 Determination of Lead Content in Gasoline by Atomic Absorption Spectrometry
  • GB/T 17674-2012 Determination of nitrogen in crude oil by boat-inlet chemiluminescence
  • GB/T 27978-2011 Determination of the waste content in the raw mix of cement
  • GB/T 17674-1999 Determination of nitrogen in petroleum and petroleum products by chemiluminescence method
  • GB/T 14637.2-1993 Scale in industrial circulating cooling water--Determi zinc--Atomic absorption spectrometry
  • GB/T 14643.5-1993 Industrial circulating cooling water sulfate--Reducing Bacteria--MPN test
  • GB/T 13580.12-1992 Determination of sodium and potassium in the wet precipitation.Atomic absorption spectrophotometry
  • GB/T 5009.143-2003 Determination of amitraz residues in vegetables,fruits,edible oil
  • GB/T 14638.2-1993 Scale in industrial circulating cooling water--Determi copper--Atomic absorption spectrometry
  • GB/T 14637-2007 Industrial circulating cooling water and scale.Determination of copper,zinc.Atomic absorption spectrometric method
  • GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
  • GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
  • GB/T 14638.1-1993 Industrial circulating cooling water--Determination of copper--Atomic absorption spectrometry
  • GB/T 14639-1993 Industrial circulating cooling water--Determination of magnesium--Atomic absorption spectrometry
  • GB/T 14640-1993 Industrial circulating cooling water--Determination of potassium--Atomic absorption spectrometry
  • GB/T 14641-1993 Industrial circulating cooling water--Determination of sodium--Atomic absorption spectrometry
  • GB/T 14637.1-1993 Industrial circulating cooling water--Determination of zinc--Atomic absorption spectrometry
  • GB/T 23837-2009 Industrial circulating cooling water.Determination of aluminium.Atomic absorption spectrometric methods
  • GB/T 14636-1993 Industrial circulating cooling water--Determination of calcium--Atomic absorption spectrometry
  • GB/T 11133-2015 Standard test method for determination of water in petroleum products, lubricating oils, and additives.Coulometric Karl Fischer titration method
  • GB/T 14636-2007 Industrial circulating cooling water.Determination of calcium,magnesium.Atomic absorption spectrometric method
  • GB/T 14643.5-2009 Examination of bacteria and algae in industrial circulating cooling water.Part 5:Examination of sulfate-reducing bacteria.MPN test
  • GB/T 5009.176-2003 Determination of dicofol residues in tea,fruits,edible vegetable oils

American Society for Testing and Materials (ASTM), Determination principle of oil in water

  • ASTM D7829-13 Standard Guide for Sediment and Water Determination in Crude Oil
  • ASTM D4006-11(2012) Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4006-22 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4006-11(2012)e1 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D7829-23 Standard Guide for Sediment and Water Determination in Crude Oil
  • ASTM D7829-13(2018) Standard Guide for Sediment and Water Determination in Crude Oil
  • ASTM D7829-13e1 Standard Guide for Sediment and Water Determination in Crude Oil
  • ASTM D782-82(1993)e1 Standard guide for determination of sediment and moisture in crude oil
  • ASTM D4006-07 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4006-81(2000)e1 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4006-81(2005) Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4007-11 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4007-11e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4928-00(2005) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4928-00e1 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4928-00 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4377-00(2006) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4377-00e1 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4377-00 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D6470-99(2004) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
  • ASTM D6470-99 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
  • ASTM UOP357-80 Trace Sulfur in Petroleum Distillates by the Nickel Reduction Method
  • ASTM UOP381-63 Traces of Sulfur in Liquefied Petroleum Gases by the Nickel Reduction Method
  • ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
  • ASTM D4929-99 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-04 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-15a Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM F3045-20 Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water
  • ASTM D473-02(2006) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-02 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D4006-16 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D473-07 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-07(2017)e1 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-07(2012) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4807-05 Standard Test Method for Sediment in Crude Oil by Membrane Filtration
  • ASTM D4807-05e1 Standard Test Method for Sediment in Crude Oil by Membrane Filtration
  • ASTM D4929-99e1 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4807-88(1999) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
  • ASTM D4807-05(2010) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
  • ASTM D4929-19 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM UOP800-79 Vanadium, Nickel and Iron in Petroleum Oils by Atomic Absorption Spectrophotometry
  • ASTM D4929-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-16 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-15 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D473-07(2012)e1 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-07(2017) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D7900-18 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • ASTM D7900-18e1 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • ASTM D7900-17 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • ASTM D3237-97 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D7059-09 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM UOP733-10 Residual Triglycerides in Deoxygenated Feedstocks by GC
  • ASTM D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4928-11 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4928-00(2010) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D6560-00(2005) Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • ASTM D6560-00 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • ASTM D8252-19 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
  • ASTM D6560-12 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • ASTM D8252-19e1 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
  • ASTM D6560-22 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • ASTM D6560-17 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • ASTM D7900-13e1 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • ASTM D7900-23 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • ASTM E1687-10(2014) Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
  • ASTM D7059-21 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D4573-22 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
  • ASTM D4928-12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D6403-99(2014) Standard Test Method for Determining Moisture in Raw and Spent Materials
  • ASTM D7900-13 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • ASTM D3237-06e1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D3237-06 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D7059-04e1 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM D7059-04 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM D3237-02 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
  • ASTM D7059-09(2017) Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM D5056-17 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • ASTM D5056-22 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • ASTM D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D5622-95(2000) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
  • ASTM D5622-17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
  • ASTM D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • ASTM D7623-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • ASTM D4573-03(2018) Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
  • ASTM D5056-04(2010) Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • ASTM UOP787-78 Silicones in Petroleum Distillates by Atomic Absorption Spectrophotometry
  • ASTM D7059-09(2013) Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM D5708-05 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
  • ASTM D3986-17 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • ASTM D7937-15(2023) Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
  • ASTM D1631-99(2004) Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
  • ASTM D1631-99 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
  • ASTM D6304-07e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • ASTM D6304-20 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • ASTM D6304-16e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • ASTM ISO/ASTM 53239-21 Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing
  • ASTM E1687-98 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
  • ASTM D5056-04 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • ASTM UOP387-62 Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry (Withdrawn 2011)
  • ASTM E1687-19 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
  • ASTM D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D8478-23 Standard Test Method for N-Hexane Recoverable Total Oil and Grease and Total Petroleum Hydrocarbons in Water by ATR-Infrared Determination
  • ASTM D5863-22 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D5708-15 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
  • ASTM D4192-08 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
  • ASTM D4192-03 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
  • ASTM D3831-98 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-01 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-01(2006) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D95-05(2010) Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-13e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
  • ASTM D4663-15 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
  • ASTM D8003-22 Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
  • ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
  • ASTM D3335-85a(1999) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D3335-85a(2020) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • ASTM D7622-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • ASTM D4691-02(2007) Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM D4691-02 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM D4691-96 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM D3919-08 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
  • ASTM D4691-11 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry

API - American Petroleum Institute, Determination principle of oil in water

  • API TR 2573-2013 Standard Guide for Sediment and Water Determination in Crude Oil Standard Guide for Sediment and Water Determination in Crude Oil (FIRST EDITION)
  • API STD 2542-1968 STANDARD METHODS OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS
  • API MPMS 10.2-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method
  • API MPMS TR 2570-2010 Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) (First Edition)
  • API STD 2548-1968 STANDARD METHOD OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS AND FUEL OILS BY CENTRIFUGE
  • API MPMS 10.9-1993 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
  • API DR 148-1997 Identification of Organic Toxicants in Treated Refinery Effluents
  • API PUBL 4149-1972 The Migration of Petroleum Products in Soil and Ground Water PRINCIPLES AND COUNTERMEASURES (Reprinted in 1986)
  • API MPMS 10.9-2002 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Second Edition)
  • API MPMS 10.1-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 1 - Determination of Sediment in Crude Oils and Fuel Oils by the Extraction Method (ASTM D 473)
  • API MPMS 10.9-2013 Manual of Petroleum Measurement Standards Chapter 10.9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Third Edition)
  • API MPMS 10.3-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Determination of Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (ASTM D4007)
  • API MPMS 10.2-2013 Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation (THIRD EDITION)
  • API MPMS 10.2-2016 Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation (FOURTH EDITION)
  • API MPMS 10.4-1988 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) (ASTM D96-88) (R 1993)
  • API MPMS 10.4-1970 Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 4-Standard Methods of Test for Water and Sediment in Crude Oils
  • API MPMS 10.1-2007 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water@ Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method (THIRD EDITION)
  • API MPMS 10.4-1999 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) (Third Edition)
  • API MPMS 10.7-2002 Manual of Petroleum Measurement Standards Chapter 10—Sediment and Water Section 7—Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Second Edition)
  • API MPMS 10.4-2013 Manual of Petroleum Measurement Standards Chapter 10.4 Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) (Fourth Edition; ERTA 03/2015)
  • API MPMS 10.2-2007 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Standard Test Method for Water in Crude Oil by Distillation (SECOND EDITION)
  • API MPMS 10.3-2008 Manual of Petroleum Measurement Standards Chapter 10—Sediment and Water Section 3—Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (THIRD EDITION)
  • API MPMS 10.3-2013 Manual of Petroleum Measurement Standards Chapter 10.3 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (FOURTH EDITION)
  • API MPMS 10.3-2003 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (Second Edition)
  • API MPMS 10.7-1991 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration (Volumetric) (First Edition; ASTM D 4377; IP 356/87; (R 1996))

国家质量监督检验检疫总局, Determination principle of oil in water

  • SN/T 4435-2016 Determination of water content in crude oil by hydride reaction method
  • SN/T 4436-2016 Colorimetric method for determination of hydrogen sulfide in crude oil
  • SN/T 4434-2016 Determination of sediments in crude oil by membrane filtration method
  • SN/T 4437-2016 Determination of light hydrocarbons in crude oil by gas chromatography
  • SN/T 4438-2016 Determination of methanol content in crude oil by multidimensional gas chromatography
  • SN/T 4429.1-2016 Determination of total mercury content in crude oil by gold amalgam cold atomic absorption spectrometry
  • SN/T 4429.2-2016 Determination of total mercury content in crude oil by Zeeman-corrected cold atomic absorption spectrometry

CZ-CSN, Determination principle of oil in water

KR-KS, Determination principle of oil in water

YU-JUS, Determination principle of oil in water

  • JUS B.H8.150-1983 Crude petroleum and petroleum products. Determination of water and sediment. Centrifuge method
  • JUS B.H8.082-1996 Petroleum and petroleum products - Determination of lead content in gasoline - Atomic absorbtion spectrometric method
  • JUS E.K8.035-1991 Aaimal and vegetable fats and oils. Determlnation of noisture and volatile matter content in emulslons

BE-NBN, Determination principle of oil in water

  • NBN-ISO 9029:1991 Crude petroleum - Determination of water - Distillation method
  • NBN-ISO 9030:1991 Crude petroleum - Determination of water and sediment - Centrifuge method
  • NBN T 52-078-1978 Crude petroleum and fuel oils -Determination of water and sediment - Centrifuge method

RO-ASRO, Determination principle of oil in water

  • STAS SR ISO 9029:1995 Crude petroleum - Determination of water -Distillation method
  • STAS SR ISO 9030:1995 Crude pet oleum - Determination of water and sediment Centrifuge method
  • STAS SR 8965-2-1995 Water and steam from the boiler installations Copper content determination. Atomic absorption spectrometrical method
  • STAS 12607-1988 SLUDGES RESULTED FROM TREATMENT OF SURFACE WATERS AND WASTE WATERS PURIFICATION Content determination of extractable substances in petroleum ether
  • STAS 12200-1985 SLUDGES RESULTED FROM= SURFACE WATERS TREATMENT AND WASTE WATERS PURIFI- CATION Nitrogen content determination
  • STAS SR 13225-1995 Sludges resulting from the surface waters treatment and used waters purding. Determination of the lead content. Spectrometric method of atomic absorption.

Professional Standard - Petroleum, Determination principle of oil in water

  • SY/T 0537-2008 The test method of wax content in crude oil
  • SY 0537-2008 Determination of Wax Content in Crude Oil
  • SY/T 5402-2008 Crude petoleum determination of water.Electric dehydration method
  • SY 5402-2016 Determination of Water Content in Crude Oil by Electrodesorption
  • SY/T 0601-1997 Determination of emulsified oil and oil-soluble in water
  • SY/T 0601-2009 Determination of emulsified oil and soluble oil in water
  • SY/T 0528-2008 Determination of arsenic in crude petroleum.Atomic fluorescence spectrometry
  • SY 5982-1994 Determination of metal elements in oil and gas field water by atomic absorption spectrometry
  • SY/T 5982-1994 Determination of metal elements in oil and gas field water by atomic absorption spectrometry
  • SY/T 7552-2005 Crude petroleum--Determination of water--Potentiometric Karl Fischer titration method
  • SY/T 0601-2016 Determination of emulsified oil and dissolved oil in produced water
  • SY/T 7550-2012 Determination of wax, resins and asphaltenes in crude oil
  • SY 7550-2012 Determination of Wax, Colloid and Asphaltene Content in Crude Oil

European Committee for Standardization (CEN), Determination principle of oil in water

  • EN ISO 9029:1995 Crude petroleum - Determination of water - Distillation method (ISO 9029:1990)
  • EN ISO 19219:2003 Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils ISO 19219:2002
  • EN ISO 15586:2003 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace ISO 15586:2003
  • EN ISO 15301:2001/AC:2007 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001/Cor 1:2007)

Association Francaise de Normalisation, Determination principle of oil in water

  • NF M07-041*NF EN ISO 9029:1995 Crude petroleum. Determination of water. Distillation method.
  • NF EN ISO 9029:1995 Pétrole brut - Détermination de la teneur en eau - Méthode de distillation.
  • NF M07-020:1974 LIQUID FUELS. WATER AND SEDIMENT IN CRUDE OILS AND FUEL OILS BY CENTRIFUGE.
  • NF M07-020-2*NF ISO 9030:2000 Crude petroleum - Determination of water and sediment - Centrifuge method
  • NF M07-092*NF ISO 10336:1998 Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method.
  • NF M07-093*NF ISO 10337:1998 Crude petroleum. Determination of water. Coulometric Karl Fischer titration method.
  • NF ISO 10337:1998 Pétrole brut - Dosage de l'eau - Méthode de Karl Fischer par titrage coulométrique.
  • NF M07-065:2004 Produits pétroliers - Dosage du potassium dans les essences - Méthode par spectrométrie d'absorption atomique
  • NF ISO 9030:2000 Pétrole brut - Détermination de la teneur en eau et en sédiments - Méthode par centrifugation
  • NF C27-229:1985 Determination of water in insulating oils, and in oil-impregnated paper and pressboard.
  • NF M07-023:1969 Liquid fuels. Determination of chlorides in crude petroleum and petroleum products.
  • NF T60-270*NF EN ISO 19219:2004 Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils
  • NF M07-104:2000 Émulsions eau dans gazole - Détermination de la teneur en eau - Méthode de Karl Fischer
  • NF T90-202:1979 Essais des eaux - Effluents aqueux des raffineries de pétrole - Dosage des matières organiques en suspension dans l'eau extractibles à l'hexane
  • NF T60-265*NF EN ISO 15301:2001 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method
  • NF EN ISO 22518:2020 Peintures et vernis - Détermination des solvants dans des peintures diluables à l'eau - Méthode par chromatographie en phase gazeuse
  • NF M07-020-1*NF ISO 3734:2000 Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method
  • NF T60-612-1*NF ISO 13357-1:2005 Petroleum products - Determination of the filtrability of lubricating oils - Part 1 : procedures for oils in presence of water.
  • NF M07-203:2008 Petroleum products - Determination of the total hydrocarbon index in aqueous effluents by Infra-Red spectrometry - Petroleum refineries. Industries, warehouses and transportation of petroleum products.
  • NF ISO 3734:2000 Produits pétroliers - Détermination de la teneur en eau et en sédiments dans les fuel-oils résiduels - Méthode par centrifugation
  • NF ISO 23893-3:2013 Qualité de l'eau - Mesurages biochimiques et physiologiques sur poisson - Partie 3 : dosage de la vitellogénine
  • NF T90-336-3*NF ISO 23893-3:2013 Water quality - Biochemical and physiological measurements on fish - Part 3: determination of vitellogenin
  • NF T60-640:2018 Petroleum products - Lubricants - Determination of water content in highly additivated oils - Titration by reaction with calcium hydride
  • NF EN ISO 15586:2004 Qualité de l'eau - Dosage des éléments traces par spectrométrie d'absorption atomique en four graphite
  • NF M07-081:1994 Liquid petroleum products. Determination of high lead concentrations in fuels. Method by atomic absorption spectrometry.
  • NF T90-393:2016 Water quality - Samplin, treatement and determination of the oligochaeta in sediment of continental surface waters
  • NF X31-432*NF ISO 16772:2004 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
  • NF EN 12634:1998 Produits pétroliers et lubrifiants - Détermination de l'indice d'acide - Méthode par titrage potentiométrique en milieu non aqueux.

International Organization for Standardization (ISO), Determination principle of oil in water

  • ISO 9029:1990 Crude petroleum; determination of water; distillation method
  • ISO 10336:1997 Crude petroleum - Determination of water - Potentiometric Karl Fischer titration method
  • ISO 9030:1990 Crude petroleum; determination of water and sediment; centrifuge method
  • ISO 3734:1976 Crude petroleum and fuel oils; Determination of water and sediment; Centrifuge method
  • ISO 7120:1987 Petroleum products and lubricants; Petroleum oils and other fluids; Determination of rust-preventing characteristics in the presence of water
  • ISO 13357-1:2002 Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water
  • ISO 13357-1:2017 Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water
  • ISO 10478:1994 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
  • ISO 23893-3:2013 Water quality - Biochemical and physiological measurements on fish - Part 3: Determination of vitellogenin
  • ISO 2169:1981 Fruits and vegetables; Physical conditions in cold stores; Definitions and measurement
  • ISO 2169:1974 Title missing - Legacy paper document

Danish Standards Foundation, Determination principle of oil in water

  • DS/EN ISO 9029:1996 Crude petroleum - Determination of water - Distillation method
  • DS/R 208:1980 Determination of oil and gresse in water. Gravimetric
  • DS/R 209:1980 Determination of oil and grease in water. Infrared spectrophotometric method
  • DS/R 209:2006 Determination of oil and grease in water - Extraction with tetrachloroethylene and measurement by infrared spectrophotometry
  • DS/ISO 23893-3:2013 Water quality - Biochemical and physiological measurements on fish - Part 3: Determination of vitellogenin
  • DS 259:1982 Determination of metals in water, sludge and sediment. General guidelines for detrmination by atomic absorption spectrophotometry in flame
  • DS/EN 16135:2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
  • DS 259:2004 Determination of metals in water, sludge and sediments - General guidelines for determination by atomic absorption spectrophotometry in flame

Japanese Industrial Standards Committee (JISC), Determination principle of oil in water

  • JIS K 2275:1996 Crude oil and petroleum products -- Determination of water content
  • JIS K 2609:1990 Crude petroleum and petroleum products -- Determination of nitrogen content
  • JIS K 2275-1:2015 Crude petroleum and petroleum products -- Determination of water -- Part 1: Distillation method
  • JIS K 2275-4:2015 Crude petroleum and petroleum products -- Determination of water -- Part 4: Hydride reaction method
  • JIS K 2275-2:2015 Crude petroleum and petroleum products -- Determination of water -- Part 2: Potentiometric Karl Fischer titration method
  • JIS K 2275-3:2015 Crude petroleum and petroleum products -- Determination of water -- Part 3: Coulometric Karl Fischer titration method

ES-AENOR, Determination principle of oil in water

Professional Standard - Commodity Inspection, Determination principle of oil in water

  • SN/T 2782-2011 Electrometric method for determination of salt content in crude oil
  • SN/T 3185-2012 Determination of halogen in crude oil.Oxygen bomb combustion-ion chromatography
  • SN/T 1410-2004 Determination of lead content in naphtha--Graphite furnace atomic absorption spectrometric method
  • SN/T 3015-2011 Determination of arsenic content in naphtha. Graphite furnace atomic absorption spectrometry
  • SN/T 2382-2009 Determination of water in liquid petroleum gas.Karl Fischer method
  • SN/T 3811-2014 Determination of arsenic and antimony in petroleum naphthas.Hydride generation atomic fluorescence spectrometric method
  • SN/T 1643-2005 Determination of arsenic in seafood for import and export--Hydride generation atomic fluorescence spectrometry

IN-BIS, Determination principle of oil in water

国家能源局, Determination principle of oil in water

  • SY/T 5402-2016 Determination of water content in crude oil by electrodeposition method
  • NB/SH/T 0986-2019 Determination of total oxygen content in gasoline, diesel and methanol fuels - reduction cracking method

PL-PKN, Determination principle of oil in water

  • PN C04087-1989 Crude petroleum and petroleum products Determination contens of water and sediment by the centrifuge method
  • PN C04288-12-1987 Technical fats Methods of testing Determination of water content
  • PN C04195-1992 Petroleum products Determination of lead content in gasoline by atomie absorption spectrometry
  • PN C04288-11-1989 Technical fats Determination of moisture and volatile matter
  • PN M34141-04-1986 Installations for waste water treatment, utilization from installation to water treatment Installations for oil remowing from/ waste water Re?uirements and acceptant test
  • PN C04570-09-1987 Water and wa"te water Tests for metals by atomie absorption spectrometry Determination of Cr(VI) and Cr(III)
  • PN C04570-07-1987 Water and waste water Test for metals by atomie absorption Determination of the total chromium in water with preliminary concentration by chelation and extraction
  • PN C04537-02-1989 Water and waste water Determination of dissolved orthophosphates by colorimetric method with stannous chloride as reductant
  • PN C04570-12-1993 Water and waste water Tests for metals by atomie absorption spectrometry Determination of molybdenum in water with preliminary concentration on chelating resin Dowex A-l

AENOR, Determination principle of oil in water

  • UNE-EN ISO 9029:1996 CRUDE PETROLEUM. DETERMINATION OF WATER. DISTILLATION METHOD. (ISO 9029:1990).
  • UNE 64030:1970 MIXED FEEDS AND RAW MATERIALS. GREASE DETERMINATION IN RE-GREASED PRODUCTS. ACID HYDROLISIS METHOD.
  • UNE 51027:1978 WATER DETERMINATION, BY DISTILLATION, IN PETROLEUM PRODUCTS
  • UNE 59037:2007 Leather. Physical tests. Determination of the performance in boiling water.
  • UNE 84630:1998 COSMETIC RAW MATERIALS. DETERMINATION OF SOLID PARAFFINES IN LIQUID SATURATED HYDROCARBONS OBTAINED FROM OIL.
  • UNE 84631:2012 Cosmetic raw materials. Determination of polycyclic aromatic hydrocarbons in liquid saturated hydrocarbons obtained from oil.
  • UNE 64029:1970 MIXED FEEDS AND RAW MATERIALS. GREASE DETERMINATION IN REGREASED PRODUCTS. GERBER METHOD.
  • UNE-EN 16135:2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)

German Institute for Standardization, Determination principle of oil in water

  • DIN EN ISO 9029:1995-11 Crude petroleum - Determination of water - Distillation method (ISO 9029:1990); German version EN ISO 9029:1995
  • DIN 10311:1985-08 Determination of the water dispersion in butter; indicator paper method
  • DIN EN ISO 19219:2004 Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils (ISO 19219:2002); German version EN ISO 19219:2003
  • DIN 10115:2020 Fundamentals for detection and determination of microorganisms in foodstuffs with impedance-method
  • DIN ISO 13357-1:2008 Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water (ISO 13357-1:2002)
  • DIN ISO 13357-1:2009 Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water (ISO 13357-1:2002); English version of DIN ISO 13357-1:2009-04
  • DIN 51443:1992 Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS)
  • DIN ISO 8691:2010 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994)
  • DIN 51400-1:1992 Testing of mineral oils and fuels; determination of the sulfur content (total sulfur); general working principles
  • DIN 51400-1:2009 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 1: General working principles
  • DIN 51400-1:2009-04 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 1: General working principles
  • DIN ISO 7120 Berichtigung 1:2007-06 Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the resence of water (ISO 7120:1987), Corrigenda to DIN ISO 7120:2000-05
  • DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
  • DIN ISO 10478:2016 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods (ISO 10478:1994)
  • DIN 38404-6:1984-05 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
  • DIN 51432:1992 Testing of used oils; determination of the percentage of water, solvents and the distillation residue in used oil; distillation method
  • DIN EN 16135:2012-02 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS); German version EN 16135:2011
  • DIN EN ISO 22518:2021-02 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019); German version EN ISO 22518:2020

AT-ON, Determination principle of oil in water

Taiwan Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • CNS 6358-1980 Method of Test for Water and Sediment in Crude Oils and Fuel Oils by Centrifuge

SE-SIS, Determination principle of oil in water

  • SIS SS 02 81 44-1979 Determi'nation of oil and grease in water — Gravimetric method
  • SIS SS 02 81 87-1986 Metal content of biological material determined by atomic absorption spectrometry — Digestion

国家市场监督管理总局、中国国家标准化管理委员会, Determination principle of oil in water

  • GB/T 25104-2019 Automatic measurement of water content in crude oil—RF method
  • GB/T 17674-2021 Determination of nitrogen in crude oil—Boat-inlet chemiluminescence
  • GB/T 3780.26-2018 Carbon black—Part 26:Determination of carbon content in carbon black feedstock oils
  • GB/T 14636-2021 Determination of calcium and magnesium in industrial circulating cooling water and scale—Atomic absorption spectrometric method
  • GB/T 14637-2021 Determination of copper,iron and zinc in industrial circulating cooling water and scale—Atomic absorption spectrometric method
  • GB/T 37493-2019 Inspection of grain and oils—Determination of soluble sugar in cereals and pules seeds—Shaffer-Somogyi
  • GB/T 40173-2021 Determination of reducing-end sugar in water-soluble chitosan—Spectrophotometric method
  • GB/T 37160-2019 Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry(ICP-OES)

Lithuanian Standards Office , Determination principle of oil in water

  • LST EN ISO 9029:2000 Crude petroleum - Determination of water - Distillation method (ISO 9029:1990)
  • LST EN 16135-2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)

Shandong Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • DB37/T 3626-2019 Determination of Petroleum Hydrocarbons in Aquatic Products
  • DB37/T 1954-2011 Determination of Mercury and Arsenic in Agricultural Water by Atomic Fluorescence Spectrometry
  • DB37/T 1953-2011 Determination of copper, zinc, lead and cadmium in agricultural water - atomic absorption spectrophotometry

Professional Standard - Ocean, Determination principle of oil in water

  • HY/T 0283-2020 Determination of cadmium in seawater—Atomic fluorescence spectrometry
  • HY/T 177-2014 Determination of sulfate-reducing bacteria in seawater.MPN method

Professional Standard - Agriculture, Determination principle of oil in water

RU-GOST R, Determination principle of oil in water

  • GOST R 53989-2010 Essential oil floral and herbal raw material. Methods of sampling, moisture and impurities determination
  • GOST R 54284-2010 Crude oil. Determination of water by coulometric Karl Fischer titation
  • GOST ISO 13357-1-2013 Petroleum products. Determination of the filterability of lubricating oils. Part 1. Oils in the presence of water
  • GOST R 50279.9-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" mercury content of the pigment portion of the paint and of the liquid portion of waterdelutable paints. Flameless atomic absorption spectrometric method
  • GOST 32404-2013 Petroleum products. Test method for gum content in fuels by jet evaporation
  • GOST 14618.6-1978 Essential oils, aromatics and their intermediates. Determination of water content
  • GOST 1594-1969 Apparatus for quantitative determination of water content in petroleum, food and other products. Specifications
  • GOST 17.1.4.01-1980 Nature protection. Hydrosphere. General requirements for methods of determination of petroleum products content in natural and waste waters
  • GOST R ISO 3734-2009 Petroleum products. Determination of water and sediment content in residual fuel oils by centrifuge method
  • GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method

Korean Agency for Technology and Standards (KATS), Determination principle of oil in water

  • KS M ISO 9030-2008(2018) Crude petroleum-Determination of water and sediment-Centrifuge method
  • KS M ISO 10337-2003(2018)
  • KS M ISO 10336-2008(2018) Crude petroleum-Determination of water-Potentiometric Karl Fischer titration method
  • KS M 7034-2018 Determination of water-soluble substances in raw material for pulp
  • KS M 7034-1983 Determination of water-soluble substances in raw material for pulp
  • KS M 7034-2002 Determination of water-soluble substances in raw material for pulp
  • KS M ISO 10336:2008 Crude petroleum-Determination of water-Potentiometric Karl Fischer titration method
  • KS M ISO 10337:2003 Crude petroleum-Determination of water-Coulometric Karl Fischer titration method
  • KS M 7034-2013 Testing method of water soluble matters in raw material for pulp
  • KS M 7034-2003 Testing method of water soluble matters in raw material for pulp
  • KS M 1076-2008(2018) Ink in electrotechnical products-Determination of lead and cadmium-Atomic spectrometry
  • KS M ISO 9114:2003 Crude petroleum-Determination of water content by hydride reaction-Field method
  • KS M ISO 9114:2013 Crude petroleum-Determination of water content by hydride reaction-Field method
  • KS M ISO 3734-2011(2016) Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
  • KS M ISO 3734-2011(2021) Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
  • KS M ISO 13357-1:2003 Petroleum products-Determination of the filterability of lubricating oils-Part 1:Procedure for oils in the presence of water
  • KS M ISO 3734:2011 Petroleum products-Determination of water and sediment in residual fuel oils-Centrifuge method
  • KS M 5985-2008(2018) Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy

Professional Standard - Geology, Determination principle of oil in water

  • DZ/T 0184.19-1997 Determination of Hydrogen Isotope in Water by Zinc Reduction Method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Determination principle of oil in water

  • ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

British Standards Institution (BSI), Determination principle of oil in water

  • BS EN ISO 9029:1997 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
  • BS 2000-356:1999 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method
  • BS 2000-386:1999 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Coulometric Karl Fischer titration method
  • BS 2000-143:2004 Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products
  • BS 3900-D8:1986 Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles
  • BS 2000-455:2011 Methods of test for petroleum and its products. Determination of the manganese content of gasoline. Atomic absorption spectrometry (AAS) method
  • BS ISO 23893-3:2013 Water quality. Biochemical and physiological measurements on fish. Determination of vitellogenin
  • BS 2000-143:2005 Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products
  • BS 2000-456:2000 Methods of test for petroleum and its products - Determination of potassium in gasoline - Atomic absorption spectrometry (AAS) method
  • BS 2000-455:2001 Determination of manganese in gasoline - Atomic absorption spectrometry (AAS) method
  • BS 2000-137:1993 Methods of test for petroleum and its products - Determination of oil content of water mix metalworking oil dilutions
  • BS 684-1.9:1976 Methods of analysis of fats and fatty oils - Physical methods - Determination of water-insoluble solvents
  • BS 6068-2.42:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry
  • BS 6068-2.43:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry
  • BS ISO 16772:2004 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
  • BS DD CEN/TS 15506:2007 Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS)
  • BS 6829-1.6:1991 Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
  • BS EN 16135:2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
  • DD CEN/TS 15506:2007 Foodstuffs — Determination of trace elements — Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS)
  • BS EN ISO 22518:2020 Paints and varnishes. Determination of solvents in water-thinnable coating materials. Gas-chromatographic method

IT-UNI, Determination principle of oil in water

海关总署, Determination principle of oil in water

  • SN/T 5311-2021 Rapid liquid phase extraction method for determination of hydrogen sulfide in crude oil and fuel oil

Professional Standard - Energy, Determination principle of oil in water

NO-SN, Determination principle of oil in water

  • NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method

International Electrotechnical Commission (IEC), Determination principle of oil in water

  • IEC 60733:1982 Determination of water in insulating oils, and in oil-impregnated paper and pressboard

Canadian General Standards Board (CGSB), Determination principle of oil in water

  • CGSB 3.0 NO 19.5-2011-CAN/CGSB-2011 M閠hodes d抏ssai des produits p閠roliers et produits connexes Dosage du plomb dans l抏ssence pour automobiles (absorption atomique)
  • CAN/CGSB-3.0 NO.19.5-2011 Methods of testing petroleum and associated products Determination of lead in automotive gasoline (Atomic absorption)
  • CGSB 3.0 NO. 19.5-04-CAN/CGSB-2004 Methodes D'Essai Des Produits Petroliers Et Produits Connexes Dosage Du Plomb Dans L'Essence Pour Automobiles (Spectrophotometrie D'Absorption Atomique)

GOSTR, Determination principle of oil in water

  • GOST 34213-2017 Essential oil floral-herbal raw material. Methods of sampling, determining the moisture, impurities and essential oil

American National Standards Institute (ANSI), Determination principle of oil in water

Jilin Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • DB22/T 2464-2016 Determination of methylmercury in water by liquid chromatography-atomic fluorescence method
  • DB22/T 1970-2013 Determination of Selenium in Aquatic Products Graphite Furnace Atomic Absorption Spectrometry

Shaanxi Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • DB61/T 947-2014 Determination of Fatty Acid Methyl Esters in Biodiesel Feed Oil by Gas Chromatography

Professional Standard - Chemical Industry, Determination principle of oil in water

  • HG/T 4325-2012 Reclaimed water.Determination of calcium and magnesium.Atomic absorption spectromic method
  • HG/T 4326-2012 Reclaimed water.Determination of nickel,copper,zinc,cadmium and lead.Atomic absorption spectromic method
  • HG/T 4656-2014 Textile dyeing and finishing auxiliaries.Determination of fluorine content of fluorocarbon water and oil repellent agent
  • HG/T 5078-2016 Textile dyeing and finishing auxiliaries.Water and oil repellent agent.Determination of soil releas performance

Group Standards of the People's Republic of China, Determination principle of oil in water

  • T/SDAQI 064-2021 Determination of urea content in diesel engines NOx reduction agent - Aqueous urea solution by refractive index
  • T/NAIA 091-2021 Determination of Mercury in Light Oil Products Microwave Digestion-Atomic Fluorescence Spectrometry
  • T/NAIA 069-2021 Determination of mercury in dry plant by water bath hot extraction and atomic fluorescence spectrometry

VN-TCVN, Determination principle of oil in water

  • TCVN 3750-2016 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

ES-UNE, Determination principle of oil in water

  • UNE 80112:2016 Test methods of cements. Physical analysis. Determination of contraction in air and expansion in water
  • UNE-EN ISO 22518:2021 Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)

中华人民共和国环境保护部, Determination principle of oil in water

  • GB 13580.12-1992 Determination of sodium and potassium in the wet precipitation—Atomic absorption spectrophotometry
  • GB 13580.13-1992 Determination of calcium and magnesium in the wet precipitation--Atomic absorption spectrophotometry

Professional Standard - Coal, Determination principle of oil in water

  • MT/T 361-1994 Determination of Copper in Coal Mine Water - Atomic Absorption Spectrophotometry
  • MT/T 364-1994 Determination method of cadmium in coal mine water - Atomic absorption spectrophotometry
  • MT/T 365-1994 Method for Determination of Manganese in Coal Mine Water - Atomic Absorption Spectrophotometry
  • MT/T 363-1994 Determination of Zinc in Coal Mine Water - Atomic Absorption Spectrophotometry
  • MT/T 362-1994 Determination method of lead in coal mine water-Atomic absorption spectrophotometry

农业农村部, Determination principle of oil in water

  • NY/T 3789-2020 Determination of mercury in farmland irrigation water by catalytic pyrolysis-atomic fluorescence method
  • NY/T 3804-2020 Determination of unsaponifiable matter in oily feed ingredients n-hexane extraction method

Indonesia Standards, Determination principle of oil in water

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination principle of oil in water

  • GB/T 33086-2016 Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry

Association of German Mechanical Engineers, Determination principle of oil in water

  • VDI 3866 Blatt 1-2000 Determination of asbestos in technical products - Principle - Sampling and sample preparation
  • VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals

Professional Standard - Petrochemical Industry, Determination principle of oil in water

  • SH/T 0605-2008 Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry(AAS)

AR-IRAM, Determination principle of oil in water

Liaoning Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • DB21/T 2974-2018 Determination of Total Sulfur and Total Chlorine in Crude Oil and Liquid Petroleum Products Combustion Oxidation-Ion Chromatography

Standard Association of Australia (SAA), Determination principle of oil in water

  • AS 2300.1.7:1990 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of extraneous matter in dairy products
  • AS 2300.1.2.2:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Nitrogen fractions from milk

AASHTO - American Association of State Highway and Transportation Officials, Determination principle of oil in water

  • T 211-1990 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration
  • T211-1990 Standard Specification for Determination of Cement Content in Cement Treated Aggregate by the Method of Titration (Nineteenth Edition)

未注明发布机构, Determination principle of oil in water

  • BS 2000-456:2000(2010) Methods of test for petroleum and its products — BS 2000 - 456 : Determination of potassium in gasoline — Atomic absorption spectrometry (AAS) method
  • BS 2000-143:2004(2012) IP 143:2004 Methods of test for petroleum and its products — Part 143 : Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products

TR-TSE, Determination principle of oil in water

  • TS 468-1967 DETERMINATION OF MOISTURE CONTENT AND CONDITIONING OF SCOURED AND RAW WOOL AND OTHER ANIMAL FIBERS
  • TS 2995-1978 Fruits And Vegetables Physical Conditions In Cold Stores Definitions And Measurement

Professional Standard - Electricity, Determination principle of oil in water

  • DL/T 1458-2015 Determination of copper, iron, aluminum and zinc contents in mineral insulating oil-Atomic absorption spectrometry method

CEN - European Committee for Standardization, Determination principle of oil in water

  • PD CEN/TS 15506:2007 Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS)

Universal Oil Products Company (UOP), Determination principle of oil in water

  • UOP 682-1984 TOTAL CYANIDE IN REFINERY WATERS BY VISIBLE SPECTROPHOTOMETRY

The American Road & Transportation Builders Association, Determination principle of oil in water

  • AASHTO T 211-1990 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration

Tianjin Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • DB12/T 199-2004 Qualitative detection method of genetically modified ingredients in fermented products such as soy sauce with soybean as raw material

Yunnan Provincial Standard of the People's Republic of China, Determination principle of oil in water

  • DB53/T 624-2014 Determination of Nitrate Nitrogen and Nitrite Nitrogen in Coking Wastewater by Dairyler's Alloy Reduction-Neutralization Titration

Professional Standard - Water Conservancy, Determination principle of oil in water

  • SL/T 220-1998 Determination of the trace amounts of Copper Zinc Cadmium and Lead in Water (Flow injection atomic absorption spectrometry)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved