ZH
RU
ES
Cadmium atomization temperature
Cadmium atomization temperature, Total:353 items.
In the international standard classification, Cadmium atomization temperature involves: Non-ferrous metals, Wastes, Water quality, Inorganic chemicals, Farming and forestry, Air quality, Paints and varnishes, Soil quality. Pedology, Pulps, Paper and board, Tobacco, tobacco products and related equipment, Metalliferous minerals, Vocabularies, Thermodynamics and temperature measurements, Surface treatment and coating, Corrosion of metals, Analytical chemistry, Testing of metals, Products of the chemical industry, Non-metalliferous minerals, Power stations in general, Powder metallurgy, Coals, Construction materials, Paint ingredients, Milk and milk products, Electrical engineering in general, Insulating materials, Insulating fluids, General methods of tests and analysis for food products, Products of non-ferrous metals, Welding, brazing and soldering, Road vehicle systems, Mechanical structures for electronic equipment, Rubber, Ferroalloys, Crude petroleum, Optical equipment, Ferrous metals, Mining and quarrying, Fasteners for aerospace construction, Electromechanical components for electronic and telecommunications equipment, Fuels, Nuclear energy engineering.
Association Francaise de Normalisation, Cadmium atomization temperature
- NF T90-134*NF EN ISO 5961:1995 Water quality - Determination of cadmium by atomic absorption spectrometry
- NF A08-417:1979 Chemical analysis of lead. Determination of cadmium (atomic absorption method).
- NF A08-821:1971 CHEMICAL ANALYSIS OF ZINC ALLOYS. DETERMINATION OF LEAD,CADMIUM AND COPPER (ATOMIC ABSORPTION METHOD).
- NF A08-811:1970 Chemical analysis of zinc. Determination of lead, cadmium, copper and aluminium. (atomic absorption method).
- NF EN 15763:2010 Produits alimentaires - Dosage des éléments traces - Dosage de l'arsenic, du cadmium, du mercure et du plomb par spectrométrie d'émission avec plasma induit par haute fréquence et spectromètre de masse (ICP-MS) après digestion sous pression
- NF X43-205:2005 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry.
- NF EN 14084:2003 Produits alimentaires - Dosage des éléments traces - Détermination du plomb, du cadmium, du zinc, du cuivre et du fer par spectrométrie d'absorption atomique (AAS) après digestion par micro-ondes
- NF A06-841-3*NF EN 12441-3:2002 Zinc and zinc alloys - Chemical analysis - Part 3 : determination of lead, cadmium and copper - Flame atomic absorption spectrometric method
- NF EN 12441-3:2002 Zinc et alliages de zinc - Analyse chimique - Partie 3 : dosages du plomb, du cadmium et du cuivre - Méthode par spectrométrie d'absorption atomique dans la flamme
- NF V03-083:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing.
- NF T90-135:1996 Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique).
- NF T30-216:1981 Paints and varnishes. Determination of "soluble" metal content. Determination of soluble cadmium content. Flame atomic absorption spectroscopic and polarographic methods.
- NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
- NF T20-435:1980 Sodium hydroxide for industrial use. Determination of mercury content. Flameless atomic absorption spectrometric method.
- NF T20-386:1977 Potassium hydroxide for industrial use. Determination of calcium and magnesium contents. Flame atomic absorption method.
- NF C93-400-11-4*NF EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4 : climatic tests - Test 11d : rapid change of temperature
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cadmium atomization temperature
- GB/T 2129-1980 Determination of lead content in cadmium--Atomic absorption spectrophotometric method
- GB/T 2131-1980 Determination of zinc content in cadmium--Atomic absorption spectrophotometric method
- GB/T 8151.8-1987 Methods for chemical analysis of zinc concentrates--The atomic absorption spectrophotometric method for determination of cadmium content
- GB/T 7475-1987 Water quality--Determination of copper, zinc, lead and cadmium--Atomic absorption spectrometry
- GB/T 23841-2009 General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
- GB/T 23841-2009"> General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
- GB/T 23841-2009 General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
- GB/T 15555.2-1995 Solid waste--Determination of copper, zinc, lead, cadmium-- Atomic absorption spectrometry
- GB/T 41769-2022 Methods for chemical analysis of cadmium zinc telluride—Determination of zinc and cadmium contents—Inductively coupled plasma atomic emission spectrometry
- GB/T 17141-1997 Soil quality--Determination of lead, cadmium--Graphite furnace atomic absorption spectrophotometry
- GB/T 8647.6-1988 Nickel--Determination of cadmium,cobalt,copper,manganese,lead and zinc contents--Flame atomic absorption spectrophotometric method
- GB/T 14352.6-1993 Methods for chemical analysis of tungsten ores molybdenum ores. Determination of cadmium content. Flame atomic absorption spectrometric method
- GB/T 8152.12-2006 Methods for chemical analysis of lead concentrates. Determination of cadmium content. Flame atomic absorption spectrometric method
- GB/T 3253.9-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of cadmium conten.Flame atomic absorption spectrometric method
- GB/T 17140-1997 Soil quality--Determination of lead, cadmium--KI-MIBK Extraction flame atomic absorption spectrophotometry
- GB/T 12689.3-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of cadmium content-The flame atomic absorption spectrometric method
- GB/T 4325.2-2013 Methods for chemical analysis of molybdenum.Part 2:Determination of cadmium content.Flame atomic absorption spectrometry
- GB/T 3260.10-2013 Methods for chemical analysis of tin.Part 10:Determination of cadmium content.Flame atomic absorption spectrometric method
- GB/T 13551-1995 Phosphate rock and concentrate--Determination of cadmium oxide content--Flame atomic absorption sepctrometric method
- GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
- GB/T 4372.4-2015 Methods for chemical analysis of zinc oxide produced by direct process.Part 4:Determination of copper,lead,iron,cadmium and manganese contents.Inductively coupled plasma atomic emission spectrometry
- GB/T 8647.6-2006 The methods for chemical analysis of nickel Determination of cadmium cobalt copper manganese lead and zinc contents
Flame atomic absorption spectrometric method
- GB/T 8151.8-2012 Methods for chemical analysis of zinc concentrates.Part 8:Determination of cadmium content.The flame atomic absorption spectrometric method
- GB/T 4103.14-2009 Methods for chemical analysis of lead and lead alloys.Part 14:Determination of cadmium conten.Flame atomic absorption spectrophotometry
- GB/T 20899.12-2016 Methods for chemical analysis of gold ores.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
- GB/T 7739.12-2016 Methods for chemical analysis of gold concerntrates.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
- GB/T 20975.6-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 6:Determination of cadmium content.Flame atomic absorption spectrometric method
- GB/T 1513-1979 Methods for determination of calcium oxide and magnesium oxide contents in manganese ores--Atomic absorption spectrophotometric method
- GB/T 2590.5-1981 Zirconium and hafnium oxides--Determination of sodium content--Flame atomic absorption spectrophotometric method
- GB/T 3884.6-2012 Methods for chemical analysis of copper concentrates.Part 6:Determination of lead, zinc, cadmium and nickel content.Flame atomic absorption spectrometry method
- GB/T 42273-2022 Methods for chemical analysis of zirconium compounds—Determination of calcium,hafnium,titanium,sodium,iron,chromium,cadmium,zinc,manganese,copper,nickel,lead contents—Inductively coupled plasma atomic
- GB/T 3884.18-2014 Methods for chemical analysis of copper concentrates.Part 18:Determination of arsenic,antimony,bismuth,lead,zinc,nickel, cadmium, cobalt, magnesium oxide, calcium oxide contents.Inductively coupled plasma atomic emission spectrometry
- GB/T 3884.18-2023 Methods for chemical analysis of copper concentrates - Part 18: Determination of content of arsenic, antimony, bismuth, lead, zinc, nickel, cadmium, cobalt, chromium, aluminum oxide, magnesium oxide, calcium oxide by inductively coupled plasma atomic emis
- GB/T 32189-2015 Atomic Force Microscopy Examination of Surface Roughness of Gallium Nitride Single Crystal Substrate
- GB/T 8151.20-2012 Methods for chemical analysis of zinc concentrates.Part 20:Determination of copper,lead,iron,arsenic,cadmium antimony,calcium,magnesium contents.Inductively coupled plasma atomic emission spectrometry
- GB/T 11064.16-2013 Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride.Part 16:Determination of calcium,magnesium,copper,lead,zinc,nickel,manganese, cadmium and aluminum content.Inductively coupled plasma atomic emission spe
- GB/T 9489.3-1988 Determinations of Fe2O3,CaO,MgO,Na2O and K2O in alundum powder by atomic absorption spectrophotometry
- GB/T 8152.17-2023 Methods for chemical analysis of lead concentrates - Part 17: Determination of aluminum, magnesium, iron, copper, zinc, cadmium, arsenic, antimony, bismuth, calcium content by inductively coupled plasma atomic emission spectrometry
- GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials
- GB/T 7731.9-2008 Ferrotungsten.Determination of bismuth content.The bismuth iodide photonmetric method and inductively coupled plasma-atomic emission spectrometry
- GB/T 11064.16-2023 Lithium carbonate, lithium hydroxide monohydrate, lithium chloride chemical analysis methods - Part 16: Determination of calcium, magnesium, copper, lead, zinc, nickel, manganese, cadmium, aluminum, iron, sulfate radical content by inductively coupled pla
- GB/T 6150.13-2008 Methods for chemical analysis of tungsten concentrates.Determination of arsenic content.Hydride reduction atomic absorption spectrometry and the silver diethyldithiocarbamate(DDTC-Ag) photometry
- GB/T 3260.3-2013 Methods for chemical analysis of tin.Part 3:Determination of bismuth content.KI photometric method and flame atomic absorption spectrometric method
- GB/T 13371-1992 Determination of copper,iron ,nickel,magnesium,manganese,zinc and silver in uranium dioxide powders and pellets by atomic absorption spectrophotometry
PL-PKN, Cadmium atomization temperature
- PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
- PN Z04102-03-1985 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in work places by atomie absorption Flame spectrometry
- PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers
- PN Z04131-10-1993 Air purity protection Tests for mercury and its compounds Determination of mercury vapour in ambient air (immission) by cold vapour techni?ue of atomie absorption spectrometry
- PN Z04133-06-1990 Air purity protection Tests for mercury and its compounds Determination of mercury vapour in ambient air (immission) by cold vapour techni?ue of atomie absorption spectrometry
- PN Z04206-02-1989 Air purity protection ests for magnesium oxide etermination of magnesium oxide in ork places by atomie absorption pectrometry
- PN Z04157-03-1990 Air purity protection ests for calcium oxide etermination of calcium oxide n work places by atomie absorption pectrometry
- PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry
- PN C04570-02-1992 Water and waste water Tests for metals by atomie ab_sorption spectrometry Determination of zinc, copper, lead, cadmium, nickel and cobalt in water with preliminary concentration on chelating resin Dowex A-J
- PN C04570-04-1992 Waler and waste water Tests for melals by atomie absorption spectrometry Determination of zinc, cupper, lead, cadmium, nickel, cobalt, iron and manganese in water with preliminary concer.tration by chelation and extraction
- PN C04570-11-1992 Water and waste water Tests for metals by atomie absorption spectromectry Determination of zinc, copper, lead, cadmium, nickel and cobalt in water with preliminary concentration on a chelating oxamide resine
- PN Z04024-03-1991 Air punty protection Tests for barium and barium compound content Determination of barium and barium compounds in work places by flame atomie absorption spectrometric method
- PN Z04005-05-1987 Air purity protection Tests for alkalies Determination of potassium hydroxide in work places by tlame atomie absorption
- PN Z04011-03-1985 Air purity protection Tests for arsenie and its compounds Determination of arsenie and its :ompounds in work places by atomie absorption flame spectrometry
- PN Z04124-02-1985 Air purity protection Tests for nickel and its compounds Determination of nickel and its compounds in work places by atomie absorption spectrometry
- PN Z04139-03-1988 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in work places by flame atomie absorption spectrometry
- PN Z04139-04-1989 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in work places by flame atomie absorption spectrometry
- PN Z04161-02-1986 Air purity protection ests for cobalt and its compounds etermination of cobalt and cobalt ompounds in work places by atomie bsorption spectrometry
- PN Z04100-03-1987 Air purity protection Tests for zinc and its compourds Determination of zinc and zinc oxide in work places by atomie absorption spectrometry
Professional Standard - Non-ferrous Metal, Cadmium atomization temperature
- YS/T 281.8-1994 Cobalt - Determination of cadmium content - Flame atomic absorption spectrophotometric method
- YS/T 536.13-2009 Methods for chemical analysis of bismuth.Determination of cadmium content.Electrothermal atomic absorption spectrometric method
- YS/T 990.7-2014 Methods for chemical analysis of copper matte.Part 7:Determination of cadmium content.Atomic absorption spectrometry
- YS/T 74.1-2010 Methods for chemical analysis of cadmium-
Part 1: Determination of arsenic content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 74.2-2010 Methods for chemical analysis of cadmium-
Part 2: Determination of antimony content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 74.9-2010 Mehtods for chemical analysis of cadmium-
Part 9:Determination of tin content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 74.3-2010 Methods for chemical analysis of cadmium-
Part 3: Determination of nickel content-
Electrothermal atomic absorption spectrometric method
- YS/T 74.4-2010 Methods for chemical analysis of cadmium-
Part 4: Determination of lead content-
Flame atomic absorption spectrometry
- YS/T 74.6-2010 Mehtods for chemical analysis of cadmium-
Part 6:Determination of zinc content-
Flame atomic absorption spectrometry
- YS/T 74.10-2010 Mehtods for chemical analysis of cadmium-
Part 10:Determination of silver content-
Flame atomic absorption spectrometry
- YS/T 281.8-2011 Methods for chemical analysis of cobalt.Part 8:Determination of cadmium content.Flame atomic absorption spectrometry
- YS/T 461.7-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of cadmium content-The atomic absorption method
- YS/T 472.1-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of cadmium content-Flame atomic absorption spectrometry
- YS/T 556.11-2011 Methods for chemical analysis of antimony concentrates.Part 11:Determination of cadmium content.Flame atomic absorption spectrometric method
- YS/T 276.6-2011 Methods for chemical analysis of indium.Part 6:Determination of copper,cadmium and zinc content.Flame atomic absorption spectrometry
- YS/T 472.1~472.5-2005 Chemical analysis methods of nickel concentrate and cobalt sulfur concentrate Determination of cadmium content Flame atomic absorption spectrometry
- YS/T 820.15-2012 Methods for chemical analysis of laterite nickel ores.Part 15:Determination of cadmium content.Flame atomic absorption spectrometry
- YS/T 715.2-2009 Methods for chemical analysis of selenium dioxide.Part 2:Determination of arsenic,cadmium,iron,mercury,lead contents.Inductively coupled plasma-atomic emission spectrometry
- YS/T 475.7-2005 Methods for chemical analysis of cast bearing metals-Determination of lead、copper、iron、bismuth、zinc、cadmium、content-AAS method
- YS/T 461.7-2013 Methods for chemical analysis of lead and zinc bulk concentrates.Part 7:The determination of cadmium content.Flame atomic absorption spectrometry
- YS/T 568.5-2006 Determination of sodium content in zirconium oxide and hafnium oxide by flame atomic absorption spectrophotometry
- YS/T 746.11-2010 Methods for chemical analysis of lead-free tin-based solders-
Part 11: Determination of Cadmium content-
Flame atomic absorption spectrometric method
- YS/T 1157.2-2016 Methods for chemical analysis of crude cobalt hydroxide.Part 2:Determination of nickel, copper, iron, manganese, zinc, lead, arsenic and cadmium contents.Inductively coupled plasma atomic emission spectrometry
- YS/T 556.16-2011 Methods for chemical analysis of antimony concentrates.Part 16:Determination of lead,zinc,copper,cadmium,nickel content.Inductively coupled plasma atomic emission spectrometry
- YS/T 276.10-2011 Methods for chemical analysis of indium.Part 10:Determination of bismuth,aluminium,lead,iron,copper,cadmium,tin and thallium content.Inductively coupled plasma atomic emission spectrometry
- YS/T 990.18-2014 Methods for chemical analysis of copper matte.Part 18:Determination of lead,zinc,nickel,arsenic,bismuth,antimony,calcium,magnesium,cadmium and cobalt content.Inductively coupled plasma atomic emission spectrometry
- YS/T 74.11-2010 Mehtods for chemical analysis of cadmium-
Part 11:Determination of arsenic,antimony,nickel,lead,copper,zinc,iron,
thallium,tin and silver contents-
Inductively coupled plasma atomic emission spectrometry
- YS/T 1014.2-2014 Methods for chemical analysis of bismuth trioxide.Part 2:Determination of silver,copper,magnesium,nickel,cobalt,manganese, calcium,iron, cadmium,lead,zinc,antimony,aluminium,sodium and sulfur contents.Inductively coupled plasma atomic emission spectrograp
- YS/T 281.16-2011 Methods for chemical analysis of cobalt.Part 16:Determination of arsenic,cadmium,copper,zinc,lead,bismuth,tin antimony,silicon,manganese,iron,nickel,aluminum,and magnesium content.Direct current arc atomic emission spectrometry
- YS/T 1593.2-2023 Methods for chemical analysis of crude lithium carbonate— Part 2：Determination of nickel, cobalt, manganese, copper, aluminum, iron, calcium, magnesium, sodium,potassium, lead, cadmium, chromium, arsenic, phosphorus contents—Inductively cou...
- YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
Professional Standard - Chemical Industry, Cadmium atomization temperature
- HG/T 4550.2-2013 Determination of cadmium in waste chemicals.Part 2:Flame atomic absorption spectrophotometric method
- HG/T 4550.1-2013 Determination of cadmium in the waste chemicals.Part 1:Graphite furnace atomic absorption spectrophotometric method
- HG/T 4550.4-2013 Determination of cadmium in waste chemicals.Part 4:Atomic fluorescence spectrometric method
- HG/T 4551.2-2013 Determination of nickel in waste chemicals.Part 2:Atomic absorption spectrophotometry method
- HG/T 4551.3-2013 Determination of nickel in waste chemicals.Part 3:Graphite furnace atomic absorption spectrophotometric method
中华人民共和国环境保护部, Cadmium atomization temperature
- GB 7475-1987 Water quality-Determination of copper,zinc,lead and cadmium-Atomlc absorption spectrometry
Professional Standard - Urban Construction, Cadmium atomization temperature
- CJ/T 100-1999 Municipal domestic refuse.Determination of cadmium.Atomic absorption spectrophotometric method
Professional Standard - Coal, Cadmium atomization temperature
- MT/T 364-1994 Determination method of cadmium in coal mine water - Atomic absorption spectrophotometry
Sichuan Provincial Standard of the People's Republic of China, Cadmium atomization temperature
- DB51/T 1347-2011 Determination of Cadmium in Crops - Graphite Furnace Atomic Absorption Spectrophotometry
CZ-CSN, Cadmium atomization temperature
- CSN 42 0680 Cast.11-1984 Chemical testing of non-ferrous metals and alloys. Chemical analysis of puretin. Determination of cadmium by the polarographic method and atomic absorption method
- CSN 65 2058-1981 SODIUM HYDROXIDE TECHNICAL Atomio Absorbtion Spoctroscopy for Dutormiiiation o? Iron
- CSN 72 2030 Cast.11-1992 Chemical analysis of blast furnace slag. Atomic absorption methods of determination of titanium dioxide, cadmium and lead contents from the same test portion portion
- CSN 68 4134-1987 Determination of small amounts of che- ical elements by atomic absorption pectrometry
- CSN 72 2030 Cast.12-1992 Chemical analysis of blast furnace slag. Atomic absorption methods of determination of titanium dioxide, zinc, cadmium, lead, sodium oxide and potassium oxide contents from the same test portion
- CSN 44 1695-1988 Chemical analysis of tetrahedrite. Determination of nickel
- CSN 65 2066-1983 SODIUM HYDROXIDE TECHNICAL Atomic Absorbtion Spectros- copy for Determinatior. of the Sun of Calcium and Magnesium
- CSN 44 1696-1988 Chemical analysis of tetrahedrite. Determination of bismuth
- CSN 42 0648 Cast.4-1986 Chemical analysis of metallic chromium. Determination of iron by the photometric and the atomic absorption method methods
- CSN 44 1691-1988 Chemical analysis of tetrahedrite. Determination of manganese
- CSN 42 0648 Cast.6-1986 Chemical analysis of metallic chromium. Determination of copper by the photometric and the atomic absorption method methods
- CSN 42 0633 Za-1986
- CSN ISO 3846-4:1994 Paints and vamishes. Determination of ?soluble" metal content Part 4: Determinalion of cadmium content. Flame atomic absorption spectrometric method and polarographic method
- CSN 44 1851-1985 Manganese ores, concentrates and aglomerates. Determination of aluminium oxide. Photometric, chelatometric and atomic absorption methods
- CSN EN 10 181-1993 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
- CSN EN 10188-1994 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method
- CSN EN 10136-1994 Chemical analysis of ferrous materials. Determination of nickel in steel and irons. Flame atomic absorption spectrometric method
- CSN 68 4152-1987 Extra pure compounds etermination of a content of chemical lements admixture in liquid compounds y a method of atomic emission spectros- opy
Shandong Provincial Standard of the People's Republic of China, Cadmium atomization temperature
- DB37/T 1953-2011 Determination of copper, zinc, lead and cadmium in agricultural water - atomic absorption spectrophotometry
Korean Agency for Technology and Standards (KATS), Cadmium atomization temperature
- KS I ISO 11174:2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
- KS M 5985-2008 Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy
- KS I ISO 17733:2005 Workplace air－Determination of mercury and inorganic mercury compounds－Method by cold－vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- KS I ISO 11174:2008 Workplace air－Determination of particulate cadmium and cadmium compounds－Flame and electrothermal atomic absorption spectromet method
- KS M ISO 10775:2007 Paper, board and pulps-Determination of cadmium content-Atomic absorption spectrometric method
- KS E ISO 11257:2017 Iron ores for shaft direct-reduction feedstocks－Determination of the low-temperature reduction-disintegration index and degree of metallization
- KS E ISO 11257-2017(2022) Iron ores for shaft direct-reduction feedstocks－Determination of the low-temperature reduction-disintegration index and degree of metallization
- KS M 5985-2008(2018) Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy
- KS D ISO 14237:2003 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of boron atomic concentration in silicon using uniformly doped materials
- KS E ISO 15249:2011 Zinc sulfide concentrates－Determination of gold content－Acid dissolution/solvent extraction/flame atomic absorption spectrometric method
- KS C IEC 60512-11-4:2003 Connectors for electronic equipment-Tests and measurements-Part 11-4:Climatic tests-Test 11d:Rapid change of temperature
- KS C IEC 60512-11-4-2003(2008) Connectors for electronic equipment－Tests and measurements－Part 11－4：Climatic tests－Test 11d：Rapid change of temperature
- KS C IEC 60512-11-4:2014 Connectors for electronic equipment-Tests and measurements-Part 11-4:Climatic tests-Test 11d:Rapid change of temperature
KR-KS, Cadmium atomization temperature
- KS I ISO 11174-2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
- KS E ISO 11257-2017 Iron ores for shaft direct-reduction feedstocks－Determination of the low-temperature reduction-disintegration index and degree of metallization
Professional Standard-Ships, Cadmium atomization temperature
- CB/T 3905.9-1999 Chemical analysis methods of tin-based bearing alloys - Determination of cadmium content by atomic absorption spectrophotometry
British Standards Institution (BSI), Cadmium atomization temperature
- BS ISO 11174:2023 Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
- BS ISO 19976-1:2019 Copper, lead and zinc sulfide concentrates. Determination of cadmium - Flame atomic absorption spectrometric method
- 22/30435294 DC BS ISO 11174. Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
- BS EN 12441-3:2002 Zinc and zinc alloys - Chemical analysis - Determination of lead, cadmium and copper - Flame atomic absorption spectometric method
- BS ISO 11174:1997 Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electro-thermal atomic absorption spectrometric method
- BS ISO 19976-2:2019 Copper, lead and zinc sulfide concentrates. Determination of cadmium - Acid digestion and inductively coupled plasma atomic emission spectrometric method
- BS ISO 11257:2022 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- 21/30436656 DC BS ISO 11257. Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS 770-9:1985 Methods for chemical analysis of cheese. Determination of nitrate and nitrite contents. Cadmium reduction and photometry method
- BS ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS ISO 11257:2007 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after ash drying
- BS ISO 17733:2004 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- BS ISO 9022-22:2012 Optics and photonics. Environmental test methods. Combined cold, dry heat or temperature change with bump or random vibration
- BS ISO 13547-1:2014 Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic. Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
- BS 7317-1:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron, nickel and zinc) by atomic absorption spectrophotometry
- BS EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11d - Rapid change of temperature
- BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
- BS 7755-3.13:1998 Soil quality. Chemical methods. Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods
- BS ISO 17852:2006 Water quality - Determination of mercury - Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
International Organization for Standardization (ISO), Cadmium atomization temperature
- ISO 10775:1995 Paper, board and pulps - Determination of cadmium content - Atomic absorption spectrometric method
- ISO/PRF 11174 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method
- ISO 11174:2023 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method
- ISO 17733:2004 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO 17733:2015 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO 11174:1996 Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method
- ISO 11257:2022 Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization
- ISO 19976-2:2019 Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
- ISO 11257:2007 Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization
- ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization
- ISO 4666-1:1982 Rubber, vulcanized; Determination of temperature rise and resistance to fatigue in flexometer testing; Part 1 : Basic principles
- ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- ISO 4666-1:2010 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 1: Basic principles
- ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
- ISO 13547-1:2014 Copper, lead, zinc and nickel sulfide concentrates - Determination of arsenic - Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
Yunnan Provincial Standard of the People's Republic of China, Cadmium atomization temperature
- DB53/T 355-2011 Determination of Lead and Cadmium in Cigarette Mainstream Smoke by Atomic Absorption Spectrophotometry
YU-JUS, Cadmium atomization temperature
- JUS C.A1.237-1990 Methods for chemical analysis of cadmium. Determination of silver content. Flame atomic absorption spectrometric method
- JUS C.A1.235-1990 Metbods for cbemical aualysis of cadmium. Determination of copper content. Flame atomic absorption svectrometric metbo?
- JUS C.A1.236-1990 Hethods for chemical saalysis of cadmium. Determination of lead content. Fla?e atomic absorption spectrometric method
- JUS C.A1.238-1990 Metha?s for chemical analysis of cadmium. Determination of zine content. Flame atomic absorption spectroinetric method
- JUS C.A1.609-1979 Methods for chemical analysis of copper and copper alloys. Determination of kad by atomic absorption
- JUS C.A1.363-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of cadmium by atomic absorpti-on spectrophotometry
- JUS H.G8.368-1989 Reagents. Nickel(II) chloride hexahydrate. Determination of lead, copper, zine and cadmium contents. Flame atomic absorption method
- JUS C.A1.623-1985 Methods for chemical analysis of copper and copper alloys. Determination ofcadmium in copper alloys by atomic absorption spectrophotometn/
- JUS C.A1.361-1982 Methods for chemical analysis of zinc alloys. Determination of aluminium by atomic absorption speetro-photometry
- JUS C.A1.210-1989 Hethods for chemical analysis of antimony and antimony alloys. Determination of iron content. Flatoe atomic absorption spectrometric nethod
- JUS C.A1.209-1989 Methods for chemical analysis of antinony and antimony alloys.Determination nf -r.inc fzfmttmt:. Plamti /ttnmin absnrDtion svectrometric metbod
国家市场监督管理总局、中国国家标准化管理委员会, Cadmium atomization temperature
- GB/T 6730.79-2019 Iron ores—Determination of cadmium content—Hydride generation-atomic fluorescence spectrometric method
- GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
- GB/T 7739.13-2019 Methods for chemical analysis of gold concentrates—Part 13: Determination of lead， zinc， bismuth， cadmium， chromium， arsenic and mercury contents—Inductively coupled plasma atomic emission spectrometry
- GB/T 14352.19-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 19：Determination of bismuth，cadmium，cobalt，copper，iron，lithium，nickel，phosphorus，lead，strontium，vanadium and zinc content—Inductive-coupled plasma atomic emission spectrophotometry（I
Association of German Mechanical Engineers, Cadmium atomization temperature
IPC - Association Connecting Electronics Industries, Cadmium atomization temperature
Professional Standard - Environmental Protection, Cadmium atomization temperature
- HJ/T 64.1-2001 Stationary Source Emission.Determination of cadmium.Flame absorption spectrophotometric method
- HJ 787-2016 Solid waste-Determination of Lead and Cadmium - Graphite Furnace Atomic Absorption Spectrometry
- HJ 786-2016 Solid waste—Determination of Lead，Zinc and Cadmium—Flame Atomic Absorption Spectrometry
- HJ/T 64.2-2001 Stationary source emission.Determination of cadmium.Graphitic furnace atomic absorption spectrophotometric method
- HJ 923-2017 Soil and sediment—Determination of total mercury —Catalytic pyrolysis-cold atomic absorption spectrophotometry
Professional Standard - Commodity Inspection, Cadmium atomization temperature
- SN/T 1841-2006 Determination of cadmium in toy materials. Flame atomic absorption spectrometry
- SN/T 0778-1999 Method of determination of cupper,zinc,lead,cadmium in rice for export.Atomit absorption spectrophotometer
- SN/T 2292-2009 Determination of lead and cadmium in cosmetics grade talc.Graphite furnace atomic absorption spectrometry method
- SN/T 2938-2011 Determination of chemical composition of refined aluminum foil Determination of lead, cadmium and arsenic by inductively coupled plasma atomic emission spectrometry
- SN/T 4305-2015 Determination of lead, iron, copper, arsenic, selenium, bismuth, cadmium and mercury in export antimony trioxide.Inductively coupled plasma atomic emission spectrometry
- SN/T 3827-2014 Determination of lead,cadmium, arsenic, mercury, antimony, chrome, nickel, barium and strontium in cosmetics for import-export.ICP-OES method
- SN/T 3941-2014 Food contact materials.Metal materials.Determination of lead, cadmium, arsenic and antimony migration.Hydride generation atomic fluorescence spectrometry method
- SN/T 0759.1-1999 Chemical analysis of imported & exported fertitizers.The atomic absorption spectrophotometric method for the determination of trace elements content
工业和信息化部, Cadmium atomization temperature
- YS/T 1171.9-2017 Methods for chemical analysis of recycled zinc raw materials Part 9: Determination of cadmium amount Atomic absorption spectrometry
- YS/T 1115.6-2016 Methods for chemical analysis of copper ores and tailings Part 6: Determination of cadmium content Flame atomic absorption spectrometry
- YS/T 1341.4-2019 Methods of chemical analysis of crude zinc Part 4: Determination of cadmium content Flame atomic absorption spectrometry
- YS/T 1171.3-2017 Methods for chemical analysis of recycled zinc raw materials Part 3: Determination of amounts of copper, lead, iron, indium, cadmium, arsenic, calcium and aluminum by inductively coupled plasma atomic emission spectrometry
- YS/T 1416-2021 Methods for chemical analysis of nickel oxide - Determination of copper, iron, zinc, calcium, magnesium, sodium, cobalt, cadmium, manganese and sulfur content by inductively coupled plasma atomic emission spectrometry
- YS/T 1201.2-2017 Methods for chemical analysis of ruthenium trichloride Part 2: Determination of aluminum, calcium, cadmium, copper, iron, manganese, magnesium and sodium by inductively coupled plasma atomic emission spectrometry
- YS/T 1115.12-2016 Methods for chemical analysis of copper ores and tailings - Part 12: Determination of amounts of copper, lead, zinc, nickel, cobalt, cadmium, magnesium and manganese by inductively coupled plasma atomic emission spectrometry
- YS/T 445.9-2019 Methods of chemical analysis of silver concentrates Part 9: Determination of lead, zinc and cadmium content Flame atomic absorption spectrometry
- YS/T 3015.5-2017 Methods for chemical analysis of gold-loaded carbon Part 5: Determination of amounts of lead, zinc, bismuth, cadmium and chromium by inductively coupled plasma atomic emission spectrometry
- YS/T 1208.2-2017 Methods for chemical analysis of bis(acetonitrile)palladium dichloride Part 2: Determination of amounts of lead, nickel, copper, cadmium, chromium, iron, platinum, gold and rhodium by inductively coupled plasma atomic emission spectrometry
- YS/T 1344.1-2020 Methods for chemical analysis of tin-doped indium oxide powder Part 1: Determination of iron, aluminum, lead, nickel, copper, cadmium, chromium and thallium content by inductively coupled plasma atomic emission spectrometry
- YS/T 445.15-2019 Methods for chemical analysis of silver concentrates Part 15: Determination of lead, zinc, copper, arsenic, antimony, bismuth and cadmium content by inductively coupled plasma atomic emission spectrometry
- YS/T 341.5-2020 Methods for chemical analysis of nickel concentrates Part 5: Determination of copper, lead, zinc, magnesium, cadmium and arsenic content by inductively coupled plasma atomic emission spectrometry
- YS/T 1120.3-2016 Methods for chemical analysis of gold-tin alloys Part 3: Determination of amounts of iron, copper, silver, lead, palladium, cadmium and zinc by inductively coupled plasma atomic emission spectrometry
- YS/T 1345.7-2021 Methods for chemical analysis of bismuth-rich lead - Part 7: Determination of copper, iron, nickel, cadmium, arsenic, antimony and bismuth content by inductively coupled plasma atomic emission spectrometry
- YS/T 1512.7-2021 Methods for chemical analysis of copper smelting fume Part 7: Determination of cadmium content Flame atomic absorption spectrometry and titration
- YS/T 1229.3-2018 Methods for chemical analysis of crude nickel hydroxide Part 3: Determination of amounts of copper, cobalt, manganese, calcium, magnesium, zinc, iron, aluminum, lead, arsenic and cadmium by inductively coupled plasma atomic emission spectrometry
- YS/T 1320.2-2019 Methods for chemical analysis of sodium tetrachloropalladate Part 2: Determination of copper, lead, nickel, platinum, cadmium, iron and gold contents by inductively coupled plasma atomic emission spectrometry
- YS/T 1569.6-2022 Methods for chemical analysis of lithium nickel manganate - Part 6: Determination of potassium, sodium, calcium, iron, copper, chromium and cadmium contents by inductively coupled plasma atomic emission spectrometry
- YS/T 1341.11-2019 Methods for chemical analysis of crude zinc Part 11: Determination of lead, iron, cadmium, copper, tin, aluminum, arsenic, antimony, germanium and indium content by inductively coupled plasma atomic emission spectrometry
- YS/T 1316.2-2019 Methods for chemical analysis of 1,2-bisdiphenylphosphine ethane palladium chloride Part 2: Determination of copper, lead, nickel, cadmium, iron, gold, aluminum content by inductively coupled plasma atomic emission spectrometry
- YS/T 1197-2017 Chemical analysis methods for palladium compounds Determination of gold, silver, platinum, rhodium, iridium, ruthenium, lead, nickel, copper, iron, tin, chromium, zinc, magnesium, manganese, aluminum, calcium, sodium, silicon, bismuth, potassium, cadmium
- YS/T 1200.2-2017 Methods for chemical analysis of 1,1'-bisdiphenylphosphine ferrocene palladium dichloride Part 2: Determination of amounts of lead, nickel, copper, cadmium, chromium, platinum, gold, rhodium and iridium by inductively coupled plasma atomic emission Spectr
- YS/T 1330.4-2019 Methods for chemical analysis of cobalt-chromium porcelain alloys Part 4: Determination of tungsten, molybdenum, iron, ruthenium, gallium, cadmium, beryllium and nickel contents by inductively coupled plasma atomic emission spectrometry
- YS/T 461.11-2021 Methods for chemical analysis of mixed lead-zinc concentrates - Part 11: Determination of arsenic, bismuth, cadmium, cobalt, copper, nickel and antimony contents by inductively coupled plasma atomic emission spectrometry
- YS/T 746.17-2018 Methods for chemical analysis of lead-free tin-based solders - Part 17: Determination of amounts of silver, copper, lead, bismuth, antimony, iron, arsenic, zinc, aluminum, cadmium, nickel and indium by inductively coupled plasma atomic emission spectromet
- YS/T 1512.10-2022 Methods for chemical analysis of copper smelting fumes - Part 10: Determination of copper, lead, zinc, bismuth, arsenic, indium, silver, cadmium, antimony, calcium, magnesium and iron contents by inductively coupled plasma atomic emission spectrometry
未注明发布机构, Cadmium atomization temperature
- BS ISO 11174:1996(1998) Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electro - thermal atomic absorption spectrometric method
- GJB 8793.11-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants - Part 11: Determination of lithium and cadmium by flame atomic absorption spectrometry
Professional Standard - Electron, Cadmium atomization temperature
- SJ/T 11013-1996 Methods of analysis for pure silver brazing for electronic components - Determination of cadmium (spectrophotometric-atomic absorption method)
- SJ/T 11026-1996 Methods of analysis for pure silver brazing for electronic components - Determination of iron, cadmium and zinc (spectrophotometric-atomic absorption method)
- SJ/T 10633-1995 Atomic-absorption spectrophotometry of impurties in alumina for electron ceramic raw materials
- SJ/T 10633-2022 Atomic absorption spectrophotometry of impurities in alumina, the raw material for electronic ceramics
American Society for Testing and Materials (ASTM), Cadmium atomization temperature
- ASTM F326-96(2006) Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- ASTM F326-17 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- ASTM F326-96(2012) Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- ASTM D3335-85a(2005) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM D3335-85a(2009) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM D3335-85a(1999) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM D3335-85a(2020) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM UOP833-82 Molybdenum in Platforming Catalysts and Fines by Atomic Absorption Spectrophotometry
- ASTM D5153-22 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
- ASTM F542-98 Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
- ASTM F542-02 Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
- ASTM D8045-17(2023) Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
- ASTM D5184-01 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
- ASTM D5184-01(2006) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
BE-NBN, Cadmium atomization temperature
- NBN T 94-403-1977 Determination of the cadmium mass in particles collected by air filtration - Atomic absorption spectrophotometry
- NBN-EN 10136-1992 Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method
- NBN-EN 10177-1992 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method
- NBN-EN 10188-1992 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method
- NBN-EN 10181-1992 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
Professional Standard - Water Conservancy, Cadmium atomization temperature
- SL/T 220-1998 Determination of the trace amounts of Copper Zinc Cadmium and Lead in Water (Flow injection atomic absorption spectrometry)
- SL/T 271-2001 Water quality - Determination of total mercury - Potassium borohydride reduction - Cold atomic absorption spectrophotmetry
Indonesia Standards, Cadmium atomization temperature
- SNI 13-6180-1999 Procedure for optimization of flame Atomic Absorption Spectrophotometer (AAS)
- SNI 6989.16-2009
- SNI 8069-2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- SNI 7853-2013 Metode pengujian kadar logam berat timbal (Pb) dan kadmium (Cd) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)
Professional Standard - Aviation, Cadmium atomization temperature
- HB/Z 5085.8-1999 Analytical method of cadmium electroplating solution in cyanide plating Determination of copper content by atomic absorption spectrometry
- HB/Z 5085.7-1999 Analytical method of cadmium electroplating solution in cyanide electroplating Atomic absorption spectrometry Determination of iron content
- HB/Z 5086.9-2000 Analytical method of copper cyanide electroplating solution Determination of zinc and cadmium content by atomic absorption spectrometry
Lithuanian Standards Office , Cadmium atomization temperature
- LST ISO 11174:2003 Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method (idt ISO 11174:1996)
- LST EN 12441-3-2002 Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method
- LST EN 14082-2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
Professional Standard - Electricity, Cadmium atomization temperature
- DL/T 867-2004 Analysis methods on arsenic, cadmium, chromium, copper, nickel, lead and zinc in fly ash (Atomic absorption spectrometry)
Hubei Provincial Standard of the People's Republic of China, Cadmium atomization temperature
- DB42/T 2047-2023 Determination of copper, zinc, chromium, nickel, lead and cadmium in waste gas from stationary pollution sources Atomic absorption spectrophotometry
Standard Association of Australia （SAA）, Cadmium atomization temperature
- AS ISO 19976.1:2020 Copper, lead and zinc sulfide concentrates — Determination of cadmium, Part 1: Flame atomic absorption spectrometric method
- AS ISO 19976.2:2020 Copper, lead and zinc sulfide concentrates — Determination of cadmium, Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
- AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- AS ISO 13547.1:2015 Copper, lead, zinc and nickel sulfide concentrates-Determination of arsenic, Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
Hebei Provincial Standard of the People's Republic of China, Cadmium atomization temperature
- DB13/T 2767-2018 Determination method of slagging property of raw coal for gasification - Sintering temperature method
Anhui Provincial Standard of the People's Republic of China, Cadmium atomization temperature
- DB34/T 815-2008 Determination of Mercury in Feed - Atomic Hydride Spectrophotometry
IN-BIS, Cadmium atomization temperature
European Committee for Standardization (CEN), Cadmium atomization temperature
- EN 12441-3:2001 Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method
- EN 14083:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion
- EN 2647:2006 Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
- EN 2647:1995 Aerospace Series - Nuts, Hexagonal, Self-Locking, Ball Seat, in Alloy Steel, Cadmium Plated, MoS2 Lubricated - Classification : 900 MPa (at Ambient Temperature) /235 Degrees C
Danish Standards Foundation, Cadmium atomization temperature
- DS/EN 12441-3:2002 Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method
- DS/EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
NO-SN, Cadmium atomization temperature
- NS 4773-1994 Water analysis. Atomic absorption spectrometry, atomization in flame. Special guidelines for aluminium, lead, iron, cadmium, copper, cobalt, chromium, manganese, nickel and zinc
German Institute for Standardization, Cadmium atomization temperature
- DIN EN 12441-3:2002-02 Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; German version EN 12441-3:2001
- DIN EN 10177:1990 Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method; german version EN 10177:1989
- DIN EN 10181:1990 Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method; German version EN 10181:1989
- DIN EN 10136:1990 Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method; German version EN 10136:1989
- DIN ISO 9022-22:2012 Optics and photonics - Environmental test methods - Part 22: Combined cold, dry heat or temperature change with bump or random vibration (ISO 9022-22:2012)
ES-UNE, Cadmium atomization temperature
- UNE-EN 12441-3:2001 Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method
American National Standards Institute （ANSI), Cadmium atomization temperature
- ANSI/IEEE 1:2000 General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation
- ANSI/ASTM F542:2007 Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
Institute of Electrical and Electronics Engineers (IEEE), Cadmium atomization temperature
- IEEE 1-2000 Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation
- IEEE 1-1986 General principles for temperature limits in the rating of electric equipment and for the evaluation of electrical insulation
AENOR, Cadmium atomization temperature
- UNE-EN 14082:2003 Foodstuffs. Determination of trace elements. Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing
- UNE-EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements -- Part 11-4: Climatic tests - Test 11d: Rapid change of temperature.
Professional Standard - Geology, Cadmium atomization temperature
- DZ/T 0064.83-2021 Methods of analysis of groundwater quality - Part 83: Determination of copper, zinc, cadmium, nickel and cobalt by flame atomic absorption spectrophotometry
- DZ/T 0064.21-2021 Methods of analysis of groundwater quality - Part 21: Determination of copper, lead, zinc, cadmium, nickel, chromium, molybdenum and silver by flameless atomic absorption spectrophotometry
- DZ/T 0064.20-2021 Analytical methods of groundwater quality - Part 20: Determination of copper, lead, zinc, cadmium, nickel and cobalt content Chelating resin exchange enrichment flame atomic absorption spectrophotometry
Military Standard of the People's Republic of China-General Armament Department, Cadmium atomization temperature
- GJB 533.35-1991 Methods for detecting air components in submarine cabins. Determination of cadmium, copper and lead content. Graphite furnace atomic absorption spectrophotometry.
- GJB 533.35A-2021 Methods for testing air components in submarine cabins - Part 35: Determination of cadmium, copper and lead content - Graphite furnace atomic absorption spectrophotometry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cadmium atomization temperature
- GB/T 10574.10-2017 Methods for chemical analysis of tin-lead solders—Part 10：Determination of cadmium content—Flame atomic absorption spectrometry and Na2EDTA titration method
- GB/T 20899.13-2017 Methods for chemical analysis of gold ores-Part 13: Determination of lead,zinc,bismuth,cadminum,chromium,arsenic and mercury contents —Inductively coupled plasma atomic emission spectrometry
- GB/T 34500.4-2017 Chemical analysis methods for rare earth waste residue and waste water—Part 4: Determination of copper, zinc, lead, chromium, cadmium, barium, cobalt, manganese, nickel and titanium contents—Inductively coupled plasma emission spectrometry
- GB/T 10574.13-2017 Methods for chemical analysis of tin-lead solders—Part 13：Determination of antimony,bismuth,iron,arsenic,copper,silver,zinc,aluminium,cadmium,phosphorous and gold contents—Inductively coupled plasma atomic emission spectrometric method
- GB/T 4698.23-2017 Methods for chemical analysis of titanium sponge，titanium and titanium alloys—Part 23：Determination of palladium content—Stannous choride-potassium iodide spectrophotometry and inductively coupled plasma atomic emission spectrometry
Japanese Industrial Standards Committee (JISC), Cadmium atomization temperature
- JIS K 0400-67-20:1998 Water quality -- Determination of selenium -- Atomic absorption spectrometric method (hydride technique)
- JIS C 5402-11-4:2005 Connectors for electronic equipment -- Tests and measurements -- Part 11-4: Climatic tests -- Test 11d: Rapid change of temperature
VN-TCVN, Cadmium atomization temperature
- TCVN 7557-3-2005 Health care solid waste incinerators.Determination of heavy metals in fluegas.Part 3:Determination of cadmium and lead concentrations by flame and electrothermal atomic absorption spectrometric method
International Electrotechnical Commission (IEC), Cadmium atomization temperature
- IEC 62321-5:2013 Determination of certain substances in electrotechnical products - Part 5: Determination of cadmium, lead, and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP- OES and ICP-MS
- IEC 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests; Test 11d: Rapid change of temperature
IT-UNI, Cadmium atomization temperature
- UNI 7798-1978
- UNI 7893-1978 Chemical analysis of ferroalloys. Determination of aluminium content in ferrovanadium. Method by atomic absorption spectrophotometry.
- UNI 7842-1978 Chemical analysis of ferrous materials. Determination of zinc in steels. Method by atomic absorption spectrophotometry in flame.
- UNI 7715-1977 Chemical analysis of ferrous materials. Determination of lead in stainless steels. Method by atomic absorption spectrophotometry in flame.
- UNI 7714-1977 Chemical analysis of ferrous materials. Determination of lead in unalloyed steels. Method by atomic absorption spectrophotometry in flame (method with previous extraction of iron).
- UNI 7840-1978
VE-FONDONORMA, Cadmium atomization temperature
Group Standards of the People's Republic of China, Cadmium atomization temperature
- T/CGA 031-2022 Method for chenical analysis of water in gold industry—Determination of silver, arsenic, barium, cadmium, chromium, copper, iron, manganese, nickel, lead and zinc content—Inductively coupled plasma optical emission spectrometry
- T/CGA 029-2022 Method for chemical analysis of cyanide leaching residue in gold industry—Determination of silver, arsenic, barium, cadmium, chromium, copper, iron, mercury, manganese, nickel, lead and zinc contents—Inductively coupled plasma optical emission spectrometr
Professional Standard - Tobacco, Cadmium atomization temperature
- YC/T 250-2008 Tobacco and tobacco products.Determination of mercury, arsenic, lead.Hydride atomic fluorescence spectrophotometry
SE-SIS, Cadmium atomization temperature
- SIS SS 02 81 52-1980 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — Special guidelines for lead, iron, cadmium, cobalt, copper, nickel and zink
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Cadmium atomization temperature
- GJB 5969.11-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 11: Determination of lithium and cadmium by flame atomic absorption spectrometry
Professional Standard - Nuclear Industry, Cadmium atomization temperature
- EJ/T 955-1995 Flow Injection-Hydride-Atomic Absorption Spectrophotometry of Arsenic, Antimony, Bismuth and Selenium in Rocks
ES-AENOR, Cadmium atomization temperature
Professional Standard - Agriculture, Cadmium atomization temperature
- 水产品质量安全检验手册 6.8.2.1-2005 Chapter 6 Inspection of elements in aquatic products Section 8 Determination of cadmium in aquatic products (GBT 5009.15-2003) 2. Flame atomic absorption spectrometry (1) Potassium iodide-4-methylpentanone-2 method