ZH
RU
ES

Powder Composition Test Method

Powder Composition Test Method, Total:500 items.

In the international standard classification, Powder Composition Test Method involves: Products of the chemical industry, Protection against fire, Powder metallurgy, Plastics, Welding, brazing and soldering, Paints and varnishes, Testing of metals, Ceramics, Analytical chemistry, Raw materials for rubber and plastics, Particle size analysis. Sieving, Construction materials, Inorganic chemicals, Mechanical testing, Non-metalliferous minerals, Rubber and plastics products, Protection against dangerous goods, Measurement of volume, mass, density, viscosity, Materials and components for railway engineering, Fuels, Air quality, Coals, Milk and milk products, Metalliferous minerals, Aids for disabled or handicapped persons, Insulating materials, Nuclear energy engineering, Measurement of fluid flow, Manufacturing forming processes, Paper and board, Electrical equipment for working in special conditions, Semiconductor devices, Animal feeding stuffs, Surface treatment and coating, Ferrous metals.

CZ-CSN, Powder Composition Test Method

CSN 66 8102 Cast.10-1997
CSN 66 8102 Cast.22-1997
CSN 66 8102 Cast.14-1978 Smokeless powders. Methods of testing. Determination of ashes in mono-base powders
CSN 66 8102 Cast.16-1997
CSN 66 8102 Cast.20-1997
CSN 66 8102 Cast.14-1997
CSN 66 8102 Cast.7-1997
CSN 66 8102 Cast.2-1989 Smokeless powders. Methods of testing. Determination of density
CSN 66 8102 Cast.20-1989 Smokeless powders. Methods of testing. Determination of water
CSN 66 8102 Cast.2-1997
CSN 66 8102 Cast.26-1997
CSN 66 8102 Cast.6-1997
CSN 66 8102 Cast.17-1978 Smokeless powders. Methods of testing. Determination of nitrocellulose-nitrogen in mono-base powders
CSN 66 8102 Cast.28-1978 Smokeless powders. Methods of testing. Determination of nitrocellulose-nitrogen in double-base powders
CSN 66 8102 Cast.18-1997
CSN 66 8102 Cast.5-1997
CSN 66 8102 Cast.16-1978 Smokeless powders. Methods of testing. Separation of nitrocellulose from mono-base powders
CSN 66 8102 Cast.27-1978 Smokeless powders. Methods of testing. Separation of nitrocellulose from double-base powders
CSN 66 8102 Cast.6-1978 Smokeless powders. Methods of testing. Determination of hygroscopicity
CSN 66 8102 Cast.18-1978 Smokeless powders. Methods of testing. Determination of sodium chloride
CSN 66 8102 Cast.13-1997
CSN 66 8102 Cast.4-1997
CSN 66 8102 Cast.21-1997
CSN 66 8102 Cast.10-1989 Smokeless powders. Methods of testing. Determination of volatiles
CSN 66 8102 Cast.3-1997
CSN 66 8102 Cast.26-1978 Smokeless powders. Methods of testing. Determination of centralites
CSN 66 8102 Cast.25-1997
CSN 66 8102 Cast.4-1978 Smokeless powders. Methods of testing. Determination of grain dimensions
CSN 66 8102 Cast.24-1997
CSN 66 8102 Cast.21-1978 Smokeless powders. Methods of testing. Determination of ethyl acetate
CSN 66 8102 Cast.3-1978 Smokeless powders. Methods of testing. Determination of bulk density
CSN 66 8102 Cast.5-1978 Smokeless powders. Methods of testing. Determination of explosion heat
CSN 66 8102 Cast.11-1978 Smokeless powders. Methods of testing. Determination of diphenylamine
CSN 66 8102 Cast.17-1997
CSN 66 8102 Cast.13-1978 Smokeless powders. Methods of testing. Determination of surface graphite
CSN 66 8102 Cast.33-1997
CSN 66 8102 Cast.22-1978 Smokeless powders. Methods of testing. Determination of ashes in double-base powders
CSN 66 8102 Cast.15-1997
CSN 66 8102 Cast.23-1978 Smokeless powders. Methods of testing. Determination of substances extractable with diethylether
CSN 42 0890 Cast.13-1984 Testing of metallic powders. Determination of particle size by microscopic method
CSN 66 8102 Cast.23-1997
CSN 66 8102 Cast.7-1978 Smokeless powders. Methods of testing. Determination of predetonation-zone length
CSN 66 8102 Cast.28-1997
CSN 66 8102 Cast.27-1997
CSN 66 8102 Cast.15-1989 Smokeless powders. Methods of testing. Determination of sodium sulphate and potassium sulphate
CSN 66 8102 Cast.31-1997
CSN 66 8102 Cast.25-1978 Smokeless powders. Methods of testing. Determination of 2,4-dinitrotoluene
CSN 66 8102 Cast.30-1997
CSN 66 8026-1957
CSN 66 8102 Cast.30-1978 Smokeless powders. Methods of testing. Stability test according to Bergmann-Junk
CSN 66 8102 Cast.32-1997
CSN 66 8102 Cast.24-1978 Smokeless powders. Methods of testing. Determination of nitroglycerin or dinitrodiglycol
CSN 66 8102 Cast.12-1978 Smokeless powders. Methods of teating. Determination of diphenylamine and centralite I in a single sample
CSN 57 0105-13-2003 Testing methods for dried milk products and codensed milk - Part 13: Dried milk. Determination of moissture content
CSN P ENV 196-4-1993 Methods of testing cement; Quantitative determination of constituents
CSN 46 7092-21-1998 Testing methods for feeding stuffs - Part 21: Determination of starch content

RU-GOST R, Powder Composition Test Method

GOST R 51063-1997 Inert powder. Methods of testing
GOST 7109-1973 Pyroxylin powders. Methods of testing chemical stability
GOST 12784-1978 Mineral powder for asphaltic mixtures. Methods of tests
GOST R 50135-1992 Microtalc. Methods for determination of dispersion composition
GOST IEC/TS 61241-2-2-2011 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers

Professional Standard - Aviation, Powder Composition Test Method

HB 5441.6-1989 Performance testing of powder metallurgy products and powders Test methods for fluidity of metal powders
HB 5441.5-1989 Performance testing of powder metallurgy products and powders - Test method for tap density of metal powders
HB 5441.1-1989 Performance testing of powder metallurgy products and powders - Sieving method for determining particle size of metal powders
HB 5441.4-1989 Performance testing of powder metallurgy products and powders - Test method for bulk density of metal powders
HB 5441.2-1989 Performance testing of powder metallurgy products and powders Test method for oil content of permeable sintered metal materials
HB 5441.7-1989 Performance testing of powder metallurgy articles and powders Test methods for density and porosity of permeable sintered metal materials
HB 5441.3-1989 Performance testing of powder metallurgy products and powders Test method for tensile strength of sintered metal materials (except cemented carbide)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Powder Composition Test Method

GB/T 43091-2023 Powder compressive strength test method
GB/T 4195-1984 Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
GB/T 1480-1995 Determination of particle size for metallic powders--Dry sieving
GB/T 35022-2018 Additive manufacturing.Main characteristics and corresponding test methods.Parts and powder materials
GB/T 5159-1985 Metallic powders--excluding powders for hardmetals--Determination of dimensional changes associated with compacting and sintering
GB/T 5159-2015 Metallic powders,excluding powders for hardmetals.Determination of dimensional changes associated with compacting and sintering
GB/T 21779-2008 Test method for particle size distribution of metal powders and related compounds by light scattering
GB/T 2005-1994 Coke for metallurgy--Determination of coke breeze content and size consist
GB/T 6609.28-2004 Chemical analysis methods and determination of physical performance of alumina Determination of the fine particle size distribution(less than 60μm)-Method using electroformed sieves
GB/T 6554-2003 Resin based reactive compounds used for electrical insulation Part 2:Methods of test:Methods for coating pourders for electrical purposes
GB/T 25494-2010 Test methods for composition analysis of getters

国家市场监督管理总局、中国国家标准化管理委员会, Powder Composition Test Method

GB/T 40934-2021 Rotational moulding—Test method for powder flowability
GB/T 41074-2021 Microbeam analysis—Method of specimen preparation for analysis of general powders using WDS and EDS

Professional Standard - Machinery, Powder Composition Test Method

JB/T 3168.3-1999 Alloy powder for welding.Chemical analysis methods
JB/T 8425-1996 Standard test method of X-ray fluorescence spectrometric analysis of content of chromium, nickel, molybdenum and vanadium in iron base dusty spray

Korean Agency for Technology and Standards (KATS), Powder Composition Test Method

KS M 3067-2011 Testing methods for polytetrafluoroethylene powder for paste extrusion
KS M 3067-1986 Testing methods for polytetrafluoroethylene powder for paste extrusion
KS D ISO 13947:2012 Metallic powders-Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS D ISO 13947:2013 Metallic powders－Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS M 5976-1994(2000) TEST METHOD FOR PARTICLE SIZE AND DISTRIBUTION OF POWDER COATING
KS M 5976-1994 Test method for particle size and distribution of power coating
KS F 2516-2007 Method of test for content of soft particles in coarse aggregate by scratching
KS F 2516-1985 Method of test for content of soft particles in coarse aggregate by scratching
KS M 3067-2011(2016) Testing methods for polytetrafluoroethylene powder for paste extrusion
KS L 1614-2001 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
KS D ISO 4491-1-2008(2018) Metallic powders — Determination of oxygen content by reduction methods — Part 1 : General guidelines
KS D ISO 4491-3-2008(2018) Metallic powders - Determination of oxygen content by reduction methods Part 3 : Hydrogen reducible oxygen
KS P ISO 17190-1:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 1:Test method for determination of pH
KS C IEC 60455-2-2:2019 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 2-2: Methods of test —Test methods for coating powders for electrical purposes
KS P ISO 17190-3:2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 3: Test method for determination of the particle size distribution by sieve fractionation
KS M 7018-1995 Test method for fibre composition of paper
KS M 6539-2018 Rubber compounding ingredients — Sulfur — Methods of test
KS M 7018-1985 Test method for fibre composition of paper
KS P ISO 17190-7:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders –Part 7: Test method for gravimetric determination of absorption against pressure
KS C IEC 60455-2-2:2003 Specification for solventless polymerisable resinous compounds used for electrical insulation-Part 2:Methods of test-Test methods for coating powders for electrical purpose
KS C IEC 60455-2-2:2015 Specification for solventless polymerisable resinous compounds used for electrical insulation-Part 2:Methods of test-Test methods for coating powders for electrical purpose

KR-KS, Powder Composition Test Method

KS D ISO 13947-2012 Metallic powders－Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS P ISO 17190-1-2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 1:Test method for determination of pH
KS C IEC 60455-2-2-2019 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 2-2: Methods of test —Test methods for coating powders for electrical purposes
KS P ISO 17190-3-2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 3: Test method for determination of the particle size distribution by sieve fractionation
KS P ISO 17190-7-2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders –Part 7: Test method for gravimetric determination of absorption against pressure

European Committee for Standardization (CEN), Powder Composition Test Method

prEN ISO 13947 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
EN 725-5:1996 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 5: Determination of the Particle Size Distribution
prEN 12416-1 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
EN 12416-1:2001+A2:2007 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
EN 725-10:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 10: Determination of Compaction Properties
EN 725-6:1996 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 6: Determination of the Specific Surface Area
EN 725-7:1995 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 7: Determination of the Absolute Density
EN 725-2:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina
EN 725-1:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 1: Determination of Impurities in Alumina
DD ENV 725-2-1994 Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 2: Determination of Impurities in Barium Titanate
EN 725-8:2006 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density
EN 725-8:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density
DD ENV 725-11-1993 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 11: Determination of the Densification on Natural Sintering
EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
EN 725-9:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 9: Determination of Untamped Bulk Density
EN 725-12:2001 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia
EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution

British Standards Institution (BSI), Powder Composition Test Method

BS 3900-J11:1997 Methods of test for paints - Testing of coating powders - Determination of flow of coating powders (inclined-plane method)
BS ISO 13947:2011 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS 3900-J6:1993 Methods of test for paints - Testing of coating powders - Determination of density of coating powders by gas comparison pyknometer (referee method)
BS 3900-J3:1998 Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders
BS 3900-J7:1993 Methods of test for paints - Testing of coating powders - Determination of density of coating powders by liquid displacement pyknometer
BS 3900-J2:1993 Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
BS 3900-J4:1995 Methods of test for paints - Determination of the storage stability of coating powders
BS 3406-1:1986 Methods for determination of particle size distribution - Guide to powder sampling
BS 3482-11:1991 Methods of test for desiccants - Determination of friability and dust content
BS 3900-J5:1993 Methods of test for paints - Testing of coating powders - Determination of loss of mass of coating powders on heating
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS 3900-J9:1993 Methods of test for paints - Testing of coating powders - Determination of flow properties of a coating powder/air mixture
BS EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of compaction properties
BS 3900-J8:1993 Methods of test for paints - Testing of coating powders - Calculation of lower explosion limit of coating powders
23/30455829 DC BS EN 12416-1. Fixed firefighting systems. Powder systems - Part 1. Requirements and test methods for components
BS EN 12416-1:2001 Fixed firefighting systems — Powder systems — Part 1: Requirements and test methods for components
BS EN 12416-1:2001(2007) Fixed firefighting systems — Powder systems — Part 1: Requirements and test methods for components
BS EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of impurities in alumina
BS EN 725-2:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of impurities in barium titanate
BS 5272:1975 Method for simultaneous routine determination of the water contents of a batch of dried milk samples
BS EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
BS 5664-2.2:1988 Solventless polymerisable resinous compounds used for electrical insulation. Methods of test.. Coating powders
BS EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density
BS 3900-J12:1998 Methods of test for paints - Testing of coating powders - Determination of compatibility of coating powders
DD ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis
BS EN 725-3:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 3:Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas
BS 3406-6:1985 Methods for determination of particle size distribution - Recommendations for centrifugal liquid sedimentation methods for powders and suspensions
BS EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Determination of oxygen content in aluminium nitride by XRF analysis
BS 1902 Sec.3.5:1981 Methods of testing refractory materials. General and textural properties. Determination of powder density (method 1902-305)
BS ISO 17190-1:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Test method for determination of pH
PD CEN/TR 196-4:2007 Methods of testing cement. Quantitative determination of constituents
BS ISO 17190-3:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for determination of the particle size distribution by sieve fractionation

German Institute for Standardization, Powder Composition Test Method

DIN ISO 14168:2020-12 Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders (ISO 14168:2011)
DIN EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; English version of DIN EN 725-5:2007-04
DIN EN 725-5:2007-04 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; German version EN 725-5:2007
DIN EN 12416-1:2020-11 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; German version EN 12416-1:2001+A2:2007
DIN EN 12416-1:2023-04 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; German and English version prEN 12416-1:2023 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN 12416-1 (2020-11).
DIN EN 12416-1:2023 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; German and English version prEN 12416-1:2023
DIN EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; English version of DIN EN 725-4:2006-07
DIN EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density English version of DIN EN 725-9:2006-05
DIN EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties; English version of DIN EN 725-10:2007-11
DIN EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density; German version EN 725-8:2006
DIN EN 725-1:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina; English version of DIN EN 725-1:2008-06
DIN EN 725-1:2008-06 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina; German version EN 725-1:2007
DIN EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina; English version of DIN EN 725-1:2007-11
DIN EN 725-2:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate; English version of DIN EN 725-2:2008-01
DIN EN 12416-1:2007 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components (includes Amendment A2:2007); English version of DIN EN 12416-1:2007-09
DIN EN ISO 10724-1:2002-04 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
DIN EN 725-12:2001-06 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia; German version EN 725-12:2001
DIN EN ISO 10724-2:2000-12 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
DIN EN 725-3:2007-04 Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas; German version EN 725-3:2007
DIN EN 451-2:2017-08 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:2017

International Organization for Standardization (ISO), Powder Composition Test Method

ISO 13947:2007 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 13947:2011 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO/CD 13947:2023 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO/DIS 13947:2022 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 17190-3:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 3: Test method for determination of the particle size distribution by sieve fractionation
ISO 17190-1:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 1: Test method for determination of pH

CU-NC, Powder Composition Test Method

NC 04-65-1985 Materials Testing. Determination of Metallic Powders Fluid Testing Method
NC 10-27-1984 Powder Metallurgy. Determination of Plexural Strength. Testing Method
NC 27-19-1987 Surface-Active Agents. Determination of Detersive Power. Testing Methods
NC 27-18-1987 Surfactants. Ilumectant Power Determination. Testing Methods

American Society for Testing and Materials (ASTM), Powder Composition Test Method

ASTM B214-07 Standard Test Method for Sieve Analysis of Metal Powders
ASTM D5965-02 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5965-96 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5965-02(2013) Standard Test Methods for Specific Gravity of Coating Powders
ASTM E1569-93(1998) Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM D5461-06 Standard Test Method for Rubber Compounding Materials8212;Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM D5461-06(2012) Standard Test Method for Rubber Compounding Materialsmdash;Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM B214-99 Standard Test Method for Sieve Analysis of Metal Powders
ASTM B214-07(2011) Standard Test Method for Sieve Analysis of Metal Powders
ASTM B214-22 Standard Test Method for Sieve Analysis of Metal Powders
ASTM B214-16 Standard Test Method for Sieve Analysis of Metal Powders
ASTM B214-15 Standard Test Method for Sieve Analysis of Metal Powders
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E1569-03 Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM D6441-99ae1 Standard Test Methods for Measuring the Hiding Power of Powder Coatings
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D6441-05(2010) Standard Test Methods for Measuring the Hiding Power of Powder Coatings
ASTM D6441-05(2016) Standard Test Methods for Measuring the Hiding Power of Powder Coatings
ASTM D5158-98(2019) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
ASTM D6441-05 Standard Test Methods for Measuring the Hiding Power of Powder Coatings
ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B430-97(2001) Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97(2001)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM D4217-91(1995)e1 Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D4217-02 Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D4217-07(2017) Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM B610-00e1 Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
ASTM D4242-07(2017) Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
ASTM C1494-13(2018) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
ASTM D6682-01 Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
ASTM D6682-01(2006) Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM B527-20 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM D4266-96 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
ASTM D4266-17 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
ASTM B964-23 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM B923-10 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM C1494-01(2007) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
ASTM C1494-13 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
ASTM C371-09(2018) Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM D5158-23 Standard Test Method for Determination of Particle Size of Fine Mesh and Powdered Activated Carbon by Air-Jet Sieving
ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM B922-02 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B923-20 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-21 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B922-22 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B922-17 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
ASTM B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
ASTM B964-16 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM B822-10 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM C371-89(2003) Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM C925-79(2000) Standard Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
ASTM C371-89(1999) Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM C371-09 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM C371-09(2014) Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM B527-93(1997) Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
ASTM B527-93(2000)e1 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM D5757-11 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM B922-20 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B610-19 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
ASTM B527-14 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds
ASTM B610-13 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
ASTM B822-97 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B923-02 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B822-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-20 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM C1494-01 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
ASTM B311-93(2002)e1 Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
ASTM B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM B311-22 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM C925-79(1995)e1 Standard Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
ASTM B796-02 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications
ASTM B796-00 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications
ASTM B330-05 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B311-93(1997) Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
ASTM B923-22 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-16 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM B761-98 Standard Test Method for Particle Size Distribution of Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-17(2021) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM C690-86(1997)e1 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
ASTM C690-09(2019) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
ASTM C889-06 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd₂O₃) Powder
ASTM C889-11 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd₂O₃) Powder
ASTM B330-02 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM E194-10 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM C1457-00 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
ASTM C1457-18 Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
ASTM C1457-00(2010)e1 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
ASTM B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
ASTM B795-20 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
ASTM D5461-02 Standard Test Method for Rubber Additives—Wet Sieve Analysis of Powdered Rubber Chemicals
ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D5757-00(2006) Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D5757-00 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM C1276-94(2005) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM B311-17 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM B311-17(2017) Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM B931-14 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy &40;PM&41; Parts
ASTM C1408-98(2004) Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
ASTM C1408-98 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
ASTM C1408-09 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
ASTM C1408-16 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
ASTM B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
ASTM B795-13 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged lpar;PFrpar; Steel Materials
ASTM C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
ASTM C889-99 Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd₂O₃) Powder
ASTM D5461-93(1998) Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals
ASTM D5461-06(2021) Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM B855-94(1999)e1 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
ASTM B329-18 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B417-11 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM B329-20 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B855-22 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM B417-13 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM C1457-00(2005) Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM B934-21 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B703-21 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM B703-94(1999)e1 Standard Test Method for Apparent Density of Powders Using Arnold Meter
ASTM B329-06(2012) Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B329-14 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B703-17 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM B610-23 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
ASTM D5461-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM C1365-06 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM C1365-06(2011) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM B329-98 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B721-91(1999) Standard Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts (Withdrawn 2004)
ASTM C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B795-93(2002)e1 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
ASTM B795-93(1997) Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
ASTM C690-09(2014) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique

Japanese Industrial Standards Committee (JISC), Powder Composition Test Method

JIS R 1628:1997 Test methods for bulk density of fine ceramic powder
JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
JIS K 4812:1978 Testing methods of nitrocellulose for smokeless powders
JIS K 5600-9-1:2006 Testing methods for paint -- Part 9: Coating powders -- Section 1: Determination of gel time of thermosetting coating powders at a given temperature
JIS K 5600-9-2:2006 Testing methods for paints -- Part 9: Coating powders -- Section 2: Inclined-plane flow test
JIS P 8120:1994 Testing method for fibre composition of paper
JIS K 5600-9-3:2006 Testing methods for paints -- Part 9: Coating powders -- Section 3: Particle size analysis by laser diffraction

Professional Standard - Commodity Inspection, Powder Composition Test Method

SN/T 1138-2002 Dry sieving test method for particle size composition of metal powders for import and export
SN/T 1961.16-2013 Detecti on of allergen components in food for export.Part 16:Real time PCR method for detecting mustard components

HU-MSZT, Powder Composition Test Method

Professional Standard - Military and Civilian Products, Powder Composition Test Method

WJ 1806-1988 Test method for acid resistance stability of colorless optical glass powder method

IN-BIS, Powder Composition Test Method

Association Francaise de Normalisation, Powder Composition Test Method

NF EN 725-3:2007 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 3 : détermination de la teneur en oxygène de poudres non-oxydes par extraction à chaud sous gaz porteur
NF B42-010:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 10 : determination of compaction properties.
NF B42-005:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 5 : determination of the particle size distribution.
NF B42-001-10*NF EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10 : determination of compaction properties
NF B42-008:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 8 : determination of tapped bulk density.
NF B42-001-5*NF EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5 : determination of the particle size distribution.
NF EN 725-5:2007 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 5 : détermination de la distribution granulométrique
NF B42-001-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8 : determination of tapped bulk density.
NF B42-007:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 7 : determination of the absolute density.
NF B42-006:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.
NF S62-191*NF EN 12416-1+A2:2007 Fixed firefighting systems - Powder systems - Part 1 : requirements and test methods for components
NF B42-009:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 9 : determination of untamped bulk density.
NF B42-001:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 1 : determination of impurities in alumina.
NF EN 725-10:2007 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 10 : détermination des propriétés de compaction
NF EN 725-1:2007 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 1 : détermination des impuretés dans l'alumine
NF B42-001-1*NF EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1 : determination of impurities in alumina.
NF B42-001-2*NF EN 725-2:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2 : determination of impurities in barium titanate.
NF EN 12416-1+A2:2007 Installations fixes de lutte contre l'incendie - Systèmes d'extinction à poudre - Partie 1 : exigences et méthodes d'essais des éléments constitutifs
NF EN 12416-1/IN2:2007 Installations fixes de lutte contre l'incendie - Systèmes d'extinction à poudre - Partie 1 : exigences et méthodes d'essais des éléments constitutifs
NF EN ISO 4491-2:2023 Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 2 : perte de masse par réduction dans l'hydrogène (perte dans l'hydrogène)
NF T30-499-2:2011 Coating powders - Part 2 : determination of density by gas comparison pyknometer (referee method).
NF T30-499-2*NF EN ISO 8130-2:2021 Coating powders - Part 2 : determination of density by gas comparison pyknometer (referee method)
NF EN ISO 8130-2:2021 Poudres pour revêtement - Partie 2 : détermination de la masse volumique à l'aide d'un pycnomètre à gaz (méthode de référence)
NF B42-012*NF EN 725-12:2002 Advanced technical ceramics - Methods of test for ceramic powders - Part 12 : chemical analysis of zirconia.
NF EN 725-12:2002 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 12 : analyse chimique de la zircone
NF B42-001-4*NF EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4 : determination of oxygen content in aluminium nitride by XRF analysis.
NF B42-001-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9 : determination of un-tamped bulk density.
NF B42-003:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 3 : determination of the oxygen content of non-oxydes by thermal extraction with a carrier gas.
NF T45-003*NF ISO 8332:2018 Rubber compounding ingredients - Sulfur - Methods of test
NF EN 13523-14:2023 Tôles prélaquées - Méthodes d'essai - Partie 14 : farinage (méthode Helmen)
NF EN ISO 10724-1:2002 Plastiques - Moulage par injection d'éprouvettes en compositions de poudre à mouler (PMC) thermodurcissables - Partie 1 : principes généraux et moulage d'éprouvettes à usages multiples

Inner Mongolia Provincial Standard of the People's Republic of China, Powder Composition Test Method

DB15/T 688.2-2014 Methods for Chemical Analysis of Thorium Dioxide Powders Part 2: Determination of Phosphorus in Thorium Dioxide Powders—Phosphorus Molybdenum Blue Photometric Method
DB15/T 688.3-2014 Methods for Chemical Analysis of Thorium Dioxide Powder Part 3: Determination of Fluorine in Thorium Dioxide Powder—Pyrohydrolysis Ion Selective Electrode Method
DB15/T 688.4-2014 Methods for the chemical analysis of thorium dioxide powders-Part 4: Determination of uranium, hafnium, antimony, and bismuth in thorium dioxide powders—Inductively coupled plasma mass spectrometry
DB15/T 688.1-2014 Method for chemical analysis of thorium dioxide powder Part 1: Determination of 22 impurity elements such as aluminum and nickel in thorium dioxide powder—Inductively coupled plasma emission spectrometry

Lithuanian Standards Office , Powder Composition Test Method

LST EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)
LST EN 725-5-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
LST EN 725-5-2007/AC-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
LST EN 725-10-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
LST EN 725-2-2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
LST EN 725-8-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
LST EN 725-1-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina
LST EN 725-11-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering
LST EN 725-9-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
LST EN 725-12-2003 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia
LST EN 725-4-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis

未注明发布机构, Powder Composition Test Method

BS 3406-1:1986(1999) Methods for Determination of particle size distribution — Part 1 : Guide to powder sampling
BS 4088-1.3:1995(1999) Carpet cleaning products — Part 1 : Methods of sampling and test — Section 1.3 General methods for impregnated powder formulations
BS EN 725-6:1996(1999) Advanced technical ceramics — Methods of test for ceramic powders — Part 6 : Determination of the specific surface area
BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens

Professional Standard - Non-ferrous Metal, Powder Composition Test Method

YS/T 424.3-2000 Methods for chemical analysis of titanium diboride powder.Determination of iron content
YS/T 424.4-2000 Methods for chemical analysis of titanium diboride powder.Determination of carbon content
YS/T 424.5-2000 Methods for chemical analysis of titanium diboride powder.Determination of oxygen content
YS/T 424.1-2000 Methods for chemical analysis of titanium diboride powder.Determination of titanium content
YS/T 424.2-2000 Methods for chemical analysis of titanium diboride powder.Determination of total boron content
YS/T 423.4-2000 Methods for chemical analysis of nuclear-grade boron carbide powder.Determination of iron content
YS/T 423.5-2000 Methods for chemical analysis of nuclear-grade boron carbide powder.Determination of oxygen content
YS/T 423.1-2000 Methods for chemical analysis of nuclear-grade boron carbide powder.Determination of total boron content
YS/T 423.2-2000 Methods for chemical analysis of nuclear-grade boron carbide powder.Determination of total carbon content
YS/T 423.3-2000 Methods for chemical analysi of nuclear-grade boron carbide powder.Determination of uncarbonized boron content
YS/T 587.6-2006 Calcined coke for prebaked blocks. Testing methods. Part 6: Determination of electrical resistivity of granules

ES-UNE, Powder Composition Test Method

UNE-EN 725-5:2007/AC:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution (Endorsed by AENOR in October of 2007.)
UNE-EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution (Endorsed by AENOR in March of 2007.)
UNE-EN 725-12:2001 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia (Endorsed by AENOR in June of 2001.)
UNE-EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina (Endorsed by AENOR in November of 2007.)
UNE-EN 451-2:2019 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
UNE-EN 725-3:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas (Endorsed by AENOR in March of 2007.)

Danish Standards Foundation, Powder Composition Test Method

DS/EN 725-3:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
DS/EN 725-5/AC:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
DS/EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
DS/EN 12416-1+A2:2007 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
DS/EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
DS/EN 725-11:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 11: Determination of densification on natural sintering
DS/ENV 725-2:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate
DS/EN 725-2:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
DS/EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina
DS/EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
DS/EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
DS/ISO 17190-3:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 3: Test method for determination of the particle size distribution by sieve fractionation
DS/ISO 17190-1:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 1: Test method for determination of pH
DS/EN 725-12:2001 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia
DS/ENV 725-11:1993 Advanced technical ceramics. Methods of test for ceramic powders. Part 11: Determination of the densification on natural sintering
DS/EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
DS/ENV 725-4:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
DS/IEC 455-2-2:1987 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 2: Methods of test. Test methods for coating powders for electrical purposes

Group Standards of the People's Republic of China, Powder Composition Test Method

T/GMES 004-2018 Determination of various components in chromite by X-ray fluorescence spectrometry (powder compression)
T/GAMA 15-2021 Test method for tensile properties of additively manufactured powder bed laser fused parts
T/CGWSTC 001-2022 Determination of various components in ceramic raw materials X-ray fluorescence spectrometry (powder compression)
T/CMES 35008-2021 Additive Manufacturing Metal Powder Directed Energy Deposition Equipment Processing Module Performance Test Method
T/CSRA 19-2022 Plastic composition test pretreatment method

(U.S.) Ford Automotive Standards, Powder Composition Test Method

FORD FLTM BV 131-1-2000 METHOD OF TESTING IMPREGNATION MATERIALS FOR CAST AND POWDER METAL COMPONENTS

AT-ON, Powder Composition Test Method

OENORM EN 12416-1-2021 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
ONORM ENV 725-11-1993 Advanced technical ceramics. Methods of test for ceramic powders. Part 11: Determination of the densification on natural sintering
ONORM ENV 725-2-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate
ONORM ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
ONORM EN 725-3-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas

AENOR, Powder Composition Test Method

UNE-EN 12416-1:2001+A2:2008 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
UNE 34076:1974 ANALYSIS METHODS FOR CHOCOLATE. COMPOSITION INTERVALS AND TEST METHODS.
UNE 83461-2:2005 Admixtures for concrete. Silica fume. Test method. Part 2: Test method to determine the fineness by laser.

VE-FONDONORMA, Powder Composition Test Method

Professional Standard - Railway, Powder Composition Test Method

TB/T 2328.17-2008 Test method for railway ballast

Professional Standard - Coal, Powder Composition Test Method

MT 158-1987 Rock meal and floating dust ingredients used under coal mines Detection method

国家煤矿安全监察局, Powder Composition Test Method

MT/T 158-1987 Method for determination of rock powder and floating dust components used in underground coal mines

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Powder Composition Test Method

PREN 3640-1992 Aerospace Series Test Methods Heat Resisting Alloys Atomized Powder Procedure for the Inspection of Loose Powder Cleanness by Water Elutriation (Edition P 1)

European Committee for Electrotechnical Standardization（CENELEC）, Powder Composition Test Method

HD 307.2.2 S1-1989 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test. Test Methods for Coating Powders for Electrical Purposes

GOSTR, Powder Composition Test Method

GOST R 54705-2011 Oilseed residues and powdered mustard seed cake. Methods for determination of moisture and volatile matter content

Professional Standard - Geology, Powder Composition Test Method

DZ/T 0279.1-2016 Analytical methods of regional geochemical samples Part 1: Determination of 24 components such as aluminum oxide and other components by powder compression—X-ray fluorescence spectrometry

Military Standard of the People's Republic of China-General Armament Department, Powder Composition Test Method

GJB 383.6A-1997 Telemetry system and subsystem test methods Diversity synthesizer test methods
GJB 383.6-1987 Telemetry system and subsystem test methods Diversity synthesizer test methods
GJB 8696.9-2015 Test methods for terminally guided artillery shells Part 9: Functional testing
GJB 8696.4-2015 Test methods for terminally guided projectiles Part 4: Weight detection
GJB 8696.5-2015 Terminal guided projectile test method Part 5: Center of gravity detection
GJB 383.22-1994 Telemetry system, subsystem test method Telemetry frequency synthesizer test method

SE-SIS, Powder Composition Test Method

SIS SMS 2843-1975 Dust separating. Test method for dynamic dust collectors

工业和信息化部, Powder Composition Test Method

YS/T 1489.1-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 1: Determination of cobalt content by potentiometric titration method
YS/T 1489.5-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 5: Determination of silicon content Molybdenum blue spectrophotometry
YS/T 1489.4-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 4: Determination of nickel content Diacetyl oxime spectrophotometry
YS/T 1489.2-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 2: Determination of chromium content Ferrous ammonium sulfate titration method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Powder Composition Test Method

GJB 5491.4-2005 Test method of terminally guided projectile Part 4:Weight test and measurement
GJB 5491.5-2005 Test method of terminally guided projectile Part 5:Center measurement of gravity test and measurement
GJB 5491.9-2005 Test method of terminally guided projectile Part 9:Funcion test and measurement
GJB 5491.30-2005 Test method of terminally guided projectile Part 30:Rotational speed test

RO-ASRO, Powder Composition Test Method

STAS SR ENV 196-4-1995 Methods of testing cement. Quantititive determination of constituents

VN-TCVN, Powder Composition Test Method

TCVN 6355-8-2009 Bricks.Test methods.Part 8: Determination of effloressence.

International Electrotechnical Commission (IEC), Powder Composition Test Method

IEC 62047-38:2021 Semiconductor devices - Micro-electromechanical devices - Part 38: Test method for adhesion strength of metal powder paste in MEMS interconnection
IEC 60455-2-2:1984/COR1:1991 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 2 : Methods of test. Test methods for coating powders for electrical purposes; Corrigendum 1

Professional Standard - Nuclear Industry, Powder Composition Test Method

EJ/T 20167-2018 Determination of nitrogen content in reprocessed uranium trioxide powder by distillation-Nessler reagent spectrophotometry

Malaysia Standards, Powder Composition Test Method

MS 133 Pt.B9-1999 Methods of test for paints and varnishes:part b9:determination of soluble hexavalent chromium content of the of the paint in powder form - diphenylcarbazide spectrophotometric method

Indonesia Standards, Powder Composition Test Method

SNI 07-0308-1989 Carbon steel, Test method for composition