ZH
RU
ES

Exosome preparation method

Exosome preparation method, Total:304 items.

In the international standard classification, Exosome preparation method involves: Analytical chemistry, Veterinary medicine, Fuels, Electromechanical components for electronic and telecommunications equipment, Optoelectronics. Laser equipment, Air quality, Products of the chemical industry, Medical equipment, Particle size analysis. Sieving, Adhesives, Components for electrical equipment, Semiconductor devices, Internal combustion engines for road vehicles, Testing of metals, Equipment for the chemical industry, Materials for the reinforcement of composites, Switchgear and controlgear, Clothes, Medical sciences and health care facilities in general, Dentistry, Laboratory medicine, Environmental protection, Fertilizers, Technical drawings, Mechanical structures for electronic equipment, Kitchen equipment, Construction materials, Installations in buildings, Valves, Coals, Fluid storage devices, Sports equipment and facilities, Insulating materials, Coatings and related processes used in aerospace industry, Protection against fire, Alarm and warning systems, Electrical equipment for working in special conditions, Telecommunication systems, Paints and varnishes, Physics. Chemistry, Electrical and electronic testing, Rubber and plastics products, Surface treatment and coating, Radiation measurements, Nuclear energy engineering, Microbiology, Processes in the food industry, Radiocommunications, Electromagnetic compatibility (EMC), Ceramics, Pipeline components and pipelines, Road engineering, Wastes, Equipment for petroleum and natural gas industries, Hospital equipment, Lamps and related equipment, Integrated circuits. Microelectronics, Radiation protection, Petroleum products in general, Heat pumps, Welding, brazing and soldering, Products of the textile industry, Protective equipment, Occupational safety. Industrial hygiene, Agricultural machines, implements and equipment, Paper and board.

British Standards Institution (BSI), Exosome preparation method

BS 4559-4:2000 Methods for preparation of calibration gas mixtures - Certificate of mixture preparation
BS DD CEN/TS 14780:2005 Solid biofuels — Methods for sample preparation
BS DD CEN/TS 14780:2006 Solid biofuels. Methods for sample preparation
BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS DD CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
BS DD CEN/TS 15443:2007 Solid recovered fuels. Methods for laboratory sample preparation
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
BS EN 15443:2011 Solid recovered fuels. Methods for the preparation of the laboratory sample
BS 5350-A1:1976 Methods of test for adhesives - Adherends - Adherend preparation
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS EN IEC 63033-2:2022 Multimedia systems and equipment for vehicles. Surround view system - Recording methods of the surround view system
BS 5551-2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS EN 60191-6-21:2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline packages (SOP)
BS 4559 Sec.9.2:1988 Methods for preparation of calibration gas mixtures. Comparison methods and methods for establishing traceability. Checking by a comparison method
BS 1881-113:1983 Testing concrete - Method for making and curing no-fines test cubes
BS 1881-113:2011 Testing concrete. Method for making and curing no-fines test cubes
19/30397877 DC BS EN 12516-2 AMD1. Industrial valves. Shell design strength. Part 2. Calculation method for steel valve shells
BS EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases. Performance requirements and test methods
BS EN 60191-6-20:2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline J-lead packages (SOJ)
BS 5551 Sec.2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS EN 60191-6-3:2001 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of quad flat packs (QFP)
BS 2782-11 Method 1121B:1997 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
BS EN 60191-6-4:2003 Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)
19/30392191 DC BS EN 50676. Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods.
18/30356945 DC BS EN 50676. Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6. Performance requirements and test methods
BS 3900-B5:1986 Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Preparation of acid extracts from liquid paints or coating powders
BS ISO 21859:2019 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment
BS 1902 Sec.7.4:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from insulating castables (method 1902-704)
BS EN ISO 20764:2003 Methods of test for petroleum and its products. Petroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method
BS 2782-11 Method 1121C:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
BS 1902 Sec.7.3:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from dense castables by vibration (method 1902-703)
BS 1902 Sec.7.5:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from mouldables and ramming mixes (method 1902-705)
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Exosome preparation method

GB/T 41699-2022 Detection of mycoplasma contamination in veterinary biological product
GB/T 28730-2012 Method for preparation of solid biofuels sample
GB/T 20099-2006 Sample preparatio.Dispersing procedures for powders in liquids
GB/T 5275.1-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 1:Methods of calibration
GB/T 22376.1-2008 Adhesives.Methods of preparing bulk specimens.Part 1:Two-part systems
GB/T 22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
GB/T 22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
GB/Z 43032-2023 Sample preparation methods for characterization of metal and metal oxide nano-objects in nanotechnology water samples
GB/T 15879.604-2023 Mechanical Standardization of Semiconductor Devices Part 6-4: General Rules for Drawing Outline Drawings of Surface Mount Semiconductor Device Packages Dimensional Measurement Methods for Ball Array (BGA) Packages
GB/T 25151.4-2010 Fabrication and inspection method for high pressure urea equipment.Part 4:Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade
GB/T 25151.3-2010 Fabrication and inspection method for high pressure urea equipment.Part 3:Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade

RU-GOST R, Exosome preparation method

GOST 33255-2015 Solid biofuels. Methods for sample preparation
GOST R 54212-2010 Solid biofuels. Methods for sample preparation
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation
GOST 33509-2015 Solid recovered fuel. Methods for laboratory sample preparation
GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST 31972-2013 Motor vehicles. Methods and procedures procedure for control systems gas equipment
GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST R 59439-2021 Bras and graces for fixing exoprosthesis mammary gland. Classification, technical requirements and control methods
GOST R ISO 10993.5-1999 Medical devices. Biological evaluation of medical devices. Part 5. Tests for cytotoxicity: in vitro methods
GOST R IEC 62552-3-2018 Household refrigerating appliances. Characteristics and test methods. Part 3. Energy consumption and volume
GOST 33007-2014 Scrubber and duster equipment. Methods for determination of dust load of gas streams. General technical requirements and control methods
GOST R 59380-2021 Sports equipment safety standards system. Equipment for sports tourism. Stand climbing with holds indoor and outdoor areas. General technical requirements and test methods
GOST R EN 50194-2008 Electrical apparatus for the detection of combustible gases in domestic premises. General requirements and control methods
GOST R 50279.1-1992 Paints and varnishes. Test methods of metal content. Preparation of acid extracts from paints in liquid or powder form
GOST 27297-1987 Nuclear instrument making items. Control equipment for shell states of fuel elements of nuclear reactors. General technical requirements and test methods
GOST R 50016-1992 Electromagnetic compatibility of technical equipment. Frequency bandwidth and off-band emission requirements of radiotransmitters. Test and control methods
GOST R 52350.1.1-2006 Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures "d". Method of testing for ascertainment of maximum experimental safe gap
GOST 31610.1.1-2012 Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures ?D?. Method of test for ascertainment of maximum experimental safe gap
PNST 73-2015 Automobile roads of general use. Fine-grained mineral materials for preparing asphalt mixtures. Method for determination of the void volume
PNST 110-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method of preparation of cylindrical specimens using Marshall installation
PNST 125-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for preparation of cylindrical specimens for determining dynamic modulus
GOST R 51330.2-1999 Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus. First supplement. Appendix D. Method of test for ascertaintment of maximum experimental safe gap
GOST 12.4.248-2013 Occupational safety standards system. Additional respiratory personal protective equipment for works with radioactive and chemically toxic substances. General requirements and test methods
GOST 30852.2-2002 Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus. First supplement. Appendix D. Method of test for ascertainment of maximum experimental safe gap
GOST R 12.4.201-1999 Occupational safety standards system. Materials for personal protection equipments with rubber-or plastics-coated fabrics. Accelerated-ageing test method
GOST R 12.4.243-2007 Occupational safety standards system. Personal protection equipment for works with radioactive substances and materials for their making. Testing methods and evaluation of decontamination ratio
GOST R 12.4.244-2007 Occupational safety standards system. Personal protective means for works with radioactive substances and materials for their making. Testing method of solutions decontaminating ability
GOST 12.2.102-1989 Occupational safety standards system. Machines and equipment for timber logging and floating. Safety requirements, control methods for safety requirements and evaluation of labour safety

CEN - European Committee for Standardization, Exosome preparation method

PD CEN/TS 14780:2005 Solid biofuels - Methods for sample preparation
PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation
PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
EN ISO 11125-6:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter
EN ISO 20776-1:2006 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of antim

Group Standards of the People's Republic of China, Exosome preparation method

T/ZJATA 0017-2023 Chemical vapor deposition (CVD) epitaxy equipment for preparing silicon carbide semiconductor materials
T/GDCA 006-2021 Cosmetic ingredients-Tyrosinase activity inhibition test method (in vitro)
T/CEC 636-2022 Preparation method of hydrogen fluoride standard gas in sulfur hexafluoride
T/CSEE 0031-2017 Infrared imaging field test method for sulfur hexafluoride gas leakage of electrical equipment
T/SBX 059-2022 Greenhouse gas emission accounting methods and reporting requirements for electronic equipment manufacturers
T/SHRH 032-2020 Anti-wrinkly and Firming Lifting Efficacy Test of Cosmetics - In vitro Test Method of Reactive Oxygen Species (ROS) Inhibition with keratinocytes
T/SPMA T/SPMA002-2023 Testing method for the soothing function of cosmetics in vitro mast cell based assay of degranulation Inhibition and histamine release

Professional Standard - Electron, Exosome preparation method

SJ 2658.10-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for modulated wideband
SJ/T 2658.10-2015 Measuring method for semiconductor infrared-emitting diode.Part 10: Modulation bandwidth

Association of German Mechanical Engineers, Exosome preparation method

VDI 3490 Blatt 2-1980 Measurement of gases; calibration gas mixtures; preparation methods; general
DVS 2205-2 Beiblatt 6-2011 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Shell construction method"
DVS 2205-2 Beiblatt 6-2008 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Shell construction method"

American Society for Testing and Materials (ASTM), Exosome preparation method

ASTM F1635-04 Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
ASTM F1635-04a Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
ASTM F1635-95 Standard Test Method for In Vitro Degradation Testing of Poly (L-lactic Acid) Resin and Fabricated Form for Surgical Implants
ASTM F1635-95(2000) Standard Test Method for In Vitro Degradation Testing of Poly (L-lactic Acid) Resin and Fabricated Form for Surgical Implants
ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM E2618-13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
ASTM D2413-99(2005) Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
ASTM D2413-99 Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
ASTM D6052-97(2016) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2023) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM F1635-16 Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
ASTM D6052-97 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2003) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2008) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM F1105-03 Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
ASTM D5951-96 Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing
ASTM D5951-96(2002) Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing
ASTM D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D722-93(2007) Standard Test Method for Grease Resistance of Paper

International Organization for Standardization (ISO), Exosome preparation method

ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids
ISO 6142:1981/Add 1:1983 Gas analysis — Preparation of calibration gas mixtures — Weighing methods — Addendum 1
ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
ISO 21859:2019 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment
ISO 20776-1:2019 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 1: Refe
ISO 11125-9:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 9: Wear testing and performance

Professional Standard - Agriculture, Exosome preparation method

NY/T 1880-2010 Densified biofuel-Methods for sample preparation

US-FCR, Exosome preparation method

FCR COE SL-96-2 FINAL REPORT-1996 METHODS OR PREPARING HORIZONTAL CONSTRUCTION JOINTS IN MASS CONCRETE

European Committee for Standardization (CEN), Exosome preparation method

EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
CEN EN 12516-4-2008 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN ISO 11125-6:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 6: Determination of Foriegn Matter
EN ISO 20776-1:2020 Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobi
EN ISO 11125-9:2022 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021)
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su

Danish Standards Foundation, Exosome preparation method

DS/EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/CLC/TR 60890:2004 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DS/EN 12516-4:2008 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
DS/EN 60191-6-21:2010 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP)
DS/EN 60191-6-20:2010 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)
DS/EN 60191-6-3:2001 Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)
DS/EN 60191-6-4:2004 Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)

Lithuanian Standards Office , Exosome preparation method

LST EN 15443-2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
LST EN 12516-4-2008 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
LST EN 60191-6-21-2011 Mechanical standardization of semiconductor devices -- Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) (IEC 60191-
LST EN 60191-6-20-2011 Mechanical standardization of semiconductor devices -- Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) (IEC
LST EN 60191-6-3-2002 Mechanical standardization of semiconductor devices. Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP) (IEC 60191-6-3:2000)
LST EN 14511-3-2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods
LST EN 60191-6-4-2003 Mechanical standardization of semiconductor devices. Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of ball grid array (BGA) (IEC 60191-6-4:2003)

AENOR, Exosome preparation method

UNE-EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
UNE 20890/1M:1999 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR.
UNE 20890:1995 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR.

Japanese Industrial Standards Committee (JISC), Exosome preparation method

JIS K 6878-1:2011 Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems

Professional Standard - Electricity, Exosome preparation method

DL/T 2224-2021 Infrared imaging field test method for sulfur hexafluoride gas leakage of electrical equipment

Association Francaise de Normalisation, Exosome preparation method

NF EN IEC 62442-2:2022 Performance énergétique des appareillages de lampes - Partie 2 : appareillages des lampes à décharge (à l'exclusion des lampes à fluorescence à vapeur de mercure à basse pression) - Méthode de mesurage pour la détermination du rendement des ...
NF X34-229*NF EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X34-227*NF EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF EN ISO 20776-1:2020 Sensibilité in vitro des agents infectieux et évaluation des performances des dispositifs pour antibiogrammes - Partie 1 : méthode de référence de microdilution en bouillon pour la détermination de la sensibilité in vitro aux agents antimicrobie...
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
NF E29-300-4*NF EN 12516-4+A1:2018 Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactured in metallic materials other than steel
NF E29-300-4/IN1*NF EN 12516-4/IN1:2018 Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactured in metallic materials other than steel
NF M01-005:1967 Solid mineral fuels. Methods for evaluating random errors in the preparation and analysis of a sample.
NF EN 12697-33/IN1:2022 Mélanges bitumineux - Méthodes d'essai - Partie 33 : Préparation de corps d'épreuve au compacteur de plaque
NF EN 12697-33+A1:2022 Mélanges bitumineux - Méthodes d'essai - Partie 33 : Préparation de corps d'épreuve au compacteur de plaque
NF ISO 5682-3:2017 Matériel de protection des cultures - Équipement de pulvérisation - Partie 3 : méthode d'essai pour évaluer les performances des systèmes de régulation du volume/surface
NF C23-676*NF EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF EN ISO 6145-5:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 5 : dispositifs d'étalonnage par capillaires
NF EN 1015-2/A1:2007 Méthodes d'essai des mortiers pour maçonnerie - Partie 2 : échantillonnage global des mortiers et préparation des mortiers pour essai
NF EN 1015-2:1999 Méthodes d'essai des mortiers pour maçonnerie - Partie 2 : échantillonnage global des mortiers et préparation des mortiers pour essai
NF EN ISO 6145-6:2017 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 6 : orifices de débit critiques
NF T54-405-1:2002 Unplasticized poly(vinyl chloride) (PVC-U) extruded or coextruded profiles for outside use - Specifications and test methods - Part 1 : solid wall PVC-U.
NF EN 50676:2019 Appareils électriques utilisés pour la détection et la mesure de la concentration de gaz frigorigènes - Exigences de performance et méthodes d'essai
NF EN 60191-6-3:2001 Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-3 : règles générales pour la préparation des dessins d'encombrement des dispositifs à semiconducteurs à montage en surface - Méthodes de mesure pour les boîtiers plats quad...
NF EN 60191-6-21:2011 Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-21 : règles générales pour la préparation des dessins d'encombrement des boîtiers pour dispositifs à semiconducteurs pour montage en surface - Méthodes de mesure pour les di...
NF EN 60191-6-20:2011 Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-20 : règles générales pour la préparation des dessins d'encombrement des boîtiers pour dispositifs à semiconducteurs pour montage en surface - Méthodes de mesure pour les di...
NF C96-013-6-21*NF EN 60191-6-21:2011 Mechanical standardization of semiconductor devices - Part 6-21 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP).
NF C96-013-6-20*NF EN 60191-6-20:2011 Mechanical standardization of semiconductor devices - Part 6-20 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)
NF EN 60191-6-4:2003 Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-4 : règles générales pour la préparation des dessins d'encombrement des dispositifs à semiconducteurs à montage en surface - Méthodes de mesure pour les dimensions des boît...
NF S97-165:2013 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
NF C96-013-6-3*NF EN 60191-6-3:2001 Mechnical standardization of semiconductor devices - Part 6-3 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)
NF C96-013-6-4*NF EN 60191-6-4:2003 Mechanical standardization of semiconductor devices - Part 6-4 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)

Military Standard of the People's Republic of China-General Armament Department, Exosome preparation method

GJB 9935.1-2021 Relay satellite system field docking test method Part 1: Single-site system
GJB 9935.2-2021 Relay satellite system field docking test method Part 2: Multiple access system

Korean Agency for Technology and Standards (KATS), Exosome preparation method

KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
KS I ISO 6145-1:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS M ISO 15166-2:2019 Adhesives — Methods of preparing bulk specimens — Part 2: Elevated-temperature-curing one-part systems
KS G ISO 20957-8:2014 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
KS G ISO 20957-8:2020 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
KS M ISO 8504-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 1：General principles
KS M ISO 11125-1-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11127-1-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile of abrasive blast-cleaned steel－Comparator procedure
KS B ISO 9692-3:2004 Welding and allied processes-Recommendations for joint preparation-Part 3:Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
KS M ISO 11125-6-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 6：Determination of foreign matter
KS M ISO 11125-7-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 7：Determination of moisture
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS M ISO 11125-2-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 2 : Determination of particle size distribution
KS M ISO 11127-2-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 2：Determination of particle size distribution
KS M ISO 11127-3-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 3：Determination of apparent density
KS M ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface profile comparators and for the determination of surface

German Institute for Standardization, Exosome preparation method

DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample; German version EN 15443:2011
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
DIN EN ISO 6145-6:2017-12 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017); German version EN ISO 6145-6:2017
DIN EN 1015-2:2007-05 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars; German version EN 1015-2:1998+A1:2006
DIN EN 60191-6-21:2011-03 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) (IEC 6019...
DIN EN 60191-6-20:2011-03 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) (I...
DIN EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version EN 15413:2011
DIN EN 60191-6-20:2011 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) (IEC
DIN EN 60191-6-21:2011 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) (IEC 60191-6
DIN EN 60191-6-3:2001 Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quat flat packs (QFP) (IEC 60191-6-3:2000);
DIN EN 60191-6-4:2004-01 Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA) (IEC 60191-6-4:20...
DIN EN 13384-3:2006-03 Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance; German version EN 13384-3:2005
DIN 58940-6:1989 Medical microbiology; methods for the determination of susceptibility of pathogens (except mycobacteria) to antimicrobial agents; determination of MICs by agar dilution method
DIN EN 50676:2020 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods; German version EN 50676:2019
DIN EN 55015 Bb.2:2014 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Supplement 2: Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps (
DIN EN ISO 23500:2015 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies (ISO 23500:2014); German version EN ISO 23500:2015
DIN EN 60191-6-4:2004 Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA) (IEC 60191-6-4:2003)
DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN 58940-6 Bb.1:1989 Medical microbiology; methods for the determination of susceptibility of pathogens (except mycobacteria) to antimicrobial agents; MICs of agents with control strains for the agar dilution method

ES-UNE, Exosome preparation method

UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN IEC 62442-2:2019 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-EN 12516-4:2016+A1:2019 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-EN 60191-6-21:2010 Mechanical standardization of semiconductor devices -- Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) (Endorse...
UNE-EN 60191-6-20:2010 Mechanical standardization of semiconductor devices -- Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) (...
UNE-EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (Endorsed by Asociación Española de Normalización in February of 2020.)
UNE-EN 60191-6-3:2000 Mechanical standardization of semiconductor devices -- Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP) (Endorsed by AEN...
UNE-EN 60191-6-4:2003 Mechanical standardization of semiconductor devices -- Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA) (Endorsed by AEN...

YU-JUS, Exosome preparation method

JUS M.C3.365-1989 Plain bearings. Methods of dimensional control. Peripheral . leugth checking of thin-walled half bearings

Shandong Provincial Standard of the People's Republic of China, Exosome preparation method

DB37/T 3589-2019 Preparation method of test sample for bonding strength between remanufactured laser cladding layer and substrate

Standard Association of Australia （SAA）, Exosome preparation method

AS/NZS 3580.2.2:2016 Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres — Compressed gas method
AS 3580.2.2:1990 Methods for sampling and analysis of ambient air - Preparation of reference test atmospheres - Compressed gas method
AS/NZS 3580.2.2:2009
AS 60890:2009
AS/NZS 60079.1.1:2002 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap
AS 4388:1996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
AS 4276.23:2016 Water microbiology, Method 23: Soils, sediments, sludges, slurries and bio-solids — Procedures for sample preparation
AS 5013.11.2:2006 Food microbiology - Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of meat and meat products
AS 5013.11.4:2006 Food microbiology - Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of products other than milk and milk products,
AS 5013.11.4:2018 Food microbiology, Method 11.4: Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Specific rules for the preparation of miscellaneous products (ISO 6887-4:2017, MOD)

IX-EU/EC, Exosome preparation method

MEDDEV 2.14/3-2007 GUIDELINES ON MEDICAL DEVICES IVD GUIDANCES: Supply of Instructions For Use (IFU) and other information for In-vitro Diagnostic (IVD) Medical Devices A GUIDE FOR MANUFACTURERS AND NOTIFIED BODIES
MEDDEV 2.14/1-2004 GUIDELINES ON MEDICAL DEVICES IVD GUIDANCES : Borderline issues A GUIDE FOR MANUFACTURERS AND NOTIFIED BODIES Rev. 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Exosome preparation method

GB/T 33488.2-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Exosome preparation method

ASHRAE 40-1980 Methods of Testing for Rating Heat-Operated Unitary Air-Conditioning Equipment for Cooling

CZ-CSN, Exosome preparation method

CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing

IN-BIS, Exosome preparation method

IS 9234-1979

RO-ASRO, Exosome preparation method

STAS SR EN 30993-5-1996 Biological evaluation of medical devices -Part 5: Tests for cytotoxicity: in vitro methods
STAS 6877/11-1979 Electrical gas apparatus for explosive gas atmosphere FLAMEPROOF ENCLOSURE Ascertainment of maximum experimen- tal safe gap

International Electrotechnical Commission (IEC), Exosome preparation method

IEC 60191-6-20:2010 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)
IEC TR3 60890:1987 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
IEC TR3 60890/AMD1:1995 A method of temperature-rise assessment by extrapolation for partially-tested assemblies (PTTA) of low-voltage switchgear and controlgear; Amendment 1
IEC 60079-1-1:2002 Electrical apparatus for explosive gas atmospheres - Part 1-1: Flameproof enclosures "d"; Method of test for ascertainment of maximum experimental safe gap
IEC 60191-6-21:2010 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP)
IEC 60191-6-3:2000 Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quad flat packs (QFP)
IEC 60191-6-4:2003 Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of ball grid array (BGA)

VN-TCVN, Exosome preparation method

TCVN 3121-2-2003 Mortar for masonry.Test methods.Part 2: Sampling and preparation of sample

KR-KS, Exosome preparation method

KS M ISO 15166-2-2019 Adhesives — Methods of preparing bulk specimens — Part 2: Elevated-temperature-curing one-part systems
KS G ISO 20957-8-2020 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
KS L ISO 21859-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment

Society of Automotive Engineers (SAE), Exosome preparation method

SAE AMS1371-1996 Compound, Rust Remover, Solid/Powder Aircraft and Aerospace Components, Immersion Tank Method

European Committee for Electrotechnical Standardization（CENELEC）, Exosome preparation method

EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
EN 60191-6-21:2010 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP)
EN 60191-6-20:2010 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)
EN 60191-6-4:2003 Mechanical standardization of semiconductor devices Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)
EN 60191-6-3:2000 Mechanical Standardization of Semiconductor Devices - Part 6-3: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Measuring Methods for Package Dimensions of Quad Flat Packs (QFP)

NL-NEN, Exosome preparation method

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

Professional Standard - Post and Telecommunication, Exosome preparation method

YD/T 1519-2006 Interoperability Specification and Test Mesurement for VoIP Accessing Equipment based on MGCP
YD/T 1973.1-2009 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network multimedia domain equipment test method.Part 1:Call control equipments

未注明发布机构, Exosome preparation method

BS EN 1015-2:1999(2007) Methods of test for mortar for masonry — Part 2 : Bulk sampling of mortars and preparation of test mortars
BS EN ISO 20764:2003(2006) Methods of test for petroleum and its products Part 512 : Petroleum and related products — Preparation of a test portion of high - boiling liquids for the determination of water content — Nitrogen purge method
BS 8475:2006(2012) Principle 1 Apparatus 1 Preparation of specific types of specimen 2 Conditioning 3 Presentation of specimens 3 Procedure for colour measurement 4 Test report 6 CANOSA RWN Annex A (normative) Specific methods of specimen preparation 7 Annex B

Professional Standard - Commodity Inspection, Exosome preparation method

SN/T 2102.3-2008 Polymerase chain reaction(PCR)for the detection of food-borne pathogens.Part 3:Requirements for sample preparation for qualitative detection

AT-OVE/ON, Exosome preparation method

OVE EN 50676-2021 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (german version)

ZA-SANS, Exosome preparation method

SANS 60079-1-1:2004 Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap
SANS 52094-1:2009 Fixed firefighting systems - Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices
SANS 52094-2:2009 Fixed firefighting systems - Components for gas extinguishing systems Part 2: Requirements and test methods for non-electrical automatic control and delay devices

GOSTR, Exosome preparation method

GOST 34233.3-2017 Vessels and apparatus.Norms and methods of strength calculation. Reinforcement of openings in shells and bottoms under internal and external pressure. Strength calculation of shells and bottoms under external static loads on the nozzle

CENELEC - European Committee for Electrotechnical Standardization, Exosome preparation method

PREN 50676-2019 Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods
PREN 50676-2018 Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods

国家药监局, Exosome preparation method

YY/T 1766.1-2021 X-ray computed tomography equipment image quality evaluation method Part 1: Modulation transfer function evaluation

Professional Standard - Chemical Industry, Exosome preparation method

HG/T 3172-2002 Fabrication and inspection method for High pressure urea equipment preparation of the test coupons for the intergranular corrosion trend test on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel
HG/T 3173-2002 Fabrication and inspection method for High pressure urea equipment intergranular corrosion trend test on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel
HG/T 3174-2002 Fabrication and inspection method for High pressure urea equipment selective corrosion and metallographic examination on the urea grade extra low carbon Cr-Ni-Mo austenitic stainless steel

Professional Standard - Medicine, Exosome preparation method

YY/T 0688.1-2008 Clinical laboratory testing and in vitro diagnostic test systems -Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility devices -Part 1: Reference method for testing the in vitro activity of antimicrobia