ZH
RU
ES

Install environmental monitoring equipment

Install environmental monitoring equipment, Total:338 items.

In the international standard classification, Install environmental monitoring equipment involves: Electrical engineering in general, Radiation measurements, Radiation protection, Environmental testing, Mining equipment, Nuclear energy engineering, Telecommunication terminal equipment, Electrical equipment for working in special conditions, Integrated Services Digital Network (ISDN), Water quality, Surface treatment and coating, Vocabularies, Corrosion of metals, Components for electrical equipment, Farm buildings, structures and installations, Transformers. Reactors, Electrical accessories, TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING, Telecommunications in general, Noise with respect to human beings, Power transmission and distribution networks, Linear and angular measurements, Mechanical testing, Quality, Switchgear and controlgear, Shipbuilding and marine structures in general, Explosion protection, Installations in buildings, External water conveyance systems, Environmental protection, Electronic component assemblies, Heat pumps, Refrigerating technology, Vibrations, shock and vibration measurements, Alarm and warning systems, Electrical wires and cables, Fibre optic communications, Semiconductor devices, Mechanical structures for electronic equipment, Buildings, Electrical and electronic testing, Information technology (IT) in general, Electricity. Magnetism. Electrical and magnetic measurements, Insulation.

Military Standard of the People's Republic of China-General Armament Department, Install environmental monitoring equipment

GJB 1093-1991 Environmental test procedures for nuclear monitoring equipment

Group Standards of the People's Republic of China, Install environmental monitoring equipment

T/SDL 1.42-2021 Technical specifications for environmental monitoring equipment
T/CEEIA 268-2017 Safety devices required for the safe functioning of equipment with respect to explosion risks
T/CSCP 0003-2022 Installation specification for corrosion big data online monitoring equipment
T/HSES 0001-2023 "Technical Specifications for Installation, Acceptance and Operation and Maintenance of Environmental Noise Automatic Monitoring System"
T/DZJN 146-2023 Environmental protection equipment maintenance, installation and operation enterprise capacity evaluation specification
T/CANSI 40-2021 Installation requirement of electrical equipment in explosive gas atmospheres for offshore engineering
T/SDL 00004.2-2019 Power User Intelligent Distribution Station Part 4 Equipment Technical Specifications Environmental Monitoring Equipment Technical Specifications
T/ZS 0216-2021 Technical code for installation and acceptance of dust on-line monitoring equipment（trail implementation）

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Install environmental monitoring equipment

GB/T 13162-1991 Equipment for monitoring airbome radioactive iodine inthe environment
GB/T 32710.2-2016 Safety requirements for environmental testing and conditioning equipment.Part 2:Refrigerated circulators
GB/T 32710.4-2016 Safety requirements for environmental testing and conditioning equipment.Part 4: Heating circulators
GB 12476.2-2010 Electrical apparatus for use in the presence of combustible dust.Part 2:Selection and installation
GB/T 3836.36-2022 Explosive atmospheres—Part 36：Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB 3836.11-1991 Electrical apparatus for explosive atmospheres--Method of test for ascertainment of maximum experimental safe gap
GB/T 19518.2-2004 Electrical apparatus for explosive gas atmospheres Electrical resistance trace heating-Part 2:Application guide for design,installation and maintenance
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres. Part 15: Electrical installation in hazardous areas (other than mines)
GB 12476.2-2006 Electrical qpparatus for use in the presence of combustible dust.Part 1-2:Electrical apparatus protected by enclosures and surface temperature limitation.Selection,installstion and maintenance
GB/T 16895.22-2022 Low-voltage electrical installations—Part 5-53: Selection and erection of electrical equipment—Devices for protection for safety, isolation, switching, control and monitoring
GB/T 3836.11-2008 Explosive atmospheres - Part 11: Equipment protection by flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap
GB 3836.11-2008 Explosive atmospheres.Part11:Equipment protection by flameproof enclosures"d"method of test for ascertainment of maximum experimental safe gap
GB/T 18216.8-2015 Electrical safty in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c.Equipment for testing,measuring or monitoring of protective measures.Part 8:Insulation monitoring devices for IT systems
GB/T 18216.12-2010 Testing, measuring or monitoring equipment for electrical safety protection measures for low-voltage power distribution systems up to 1000 V AC and 1500 V DC Part 12: Performance measurement and monitoring devices (PMD)

Japanese Industrial Standards Committee (JISC), Install environmental monitoring equipment

JIS Z 4325:2008 Equipment for continuously monitoring gamma radiation in the environment
JIS C 0051:2002 Environmental testing -- Part 2-21: Tests -- Test U: Robustness of termination and integral mounting devices
JIS C 60068-2-47:2004 Environmental testing -- Part 2-47: Test methods -- Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
JIS C 0047:2004 Environmental testing -- Part 2-47: Test methods -- Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests

Professional Standard - Nuclear Industry, Install environmental monitoring equipment

EJ/T 777-1993 Radioactive aerosol monitoring equipment in the environment

ETSI - European Telecommunications Standards Institute, Install environmental monitoring equipment

PRETS 300 019-2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations
ETS 300 019- 2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations
ETSI EN 300 019-2-5:2002 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations (V3.0.0)
PRETS 300 019-2-5-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests T 5.1 and T 5.2 Ground Vehicle Installations
ETSI EN 300 019-2-5:2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations (V2.1.2)
ETSI EN 300 019-1-5:2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations (V2.1.4)
ETSI EN 300 019-1-5:2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations (V2.1.2)
ETSI EN 300 019-1-5:2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations (V2.1.0)
PRETS 300 019-1-5-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-5: Classification of Environmental Conditions Ground Vehicle Installations
ETS 300 019-1-5-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-5: Classification of Environmental Conditions Ground Vehicle Installations
ES 202 336-12-2018 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (power@ cooling and building environment systems used in telecommunication networks); Part 12: ICT equipment power@ energy and environmental parameters monitorin
ES 202 336-12-2015 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (power@ cooling and building environment systems used in telecommunication networks); Part 12: ICT equipment power@ energy and environmental parameters monitorin
ES 202 336-12-2019 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (power@ cooling and building environment systems used in telecommunication networks); Part 12: ICT equipment power@ energy and environmental parameters monitorin
ES 202 336-5-2010 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power@ Cooling and Building Environment Systems used in Telecommunication Networks); Part 5: AC diesel back-up generator system control and monitoring informati
ES 202 336-2-2009 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (Power@ Cooling and environment systems used in telecommunication networks); Part 2: DC power system control and monitoring information model (V1.1.1)
ES 202 336-4-2013 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power@ Cooling and Building Environment Systems used in Telecommunication Networks); Part 4: AC distribution power system control and monitoring information mod
ES 202 336-6-2012 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power@ Cooling and Building Environment Systems used in Telecommunication Networks); Part 6: Air Conditioning System control and monitoring information model (V
ES 202 336-10-2011 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power@ Cooling and Building Environment Systems used in Telecommunication Networks); Part 10: AC inverter power system control and monitoring information model
ES 202 336-11-2014 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (Power@ Cooling and environment systems used in telecommunication networks); Part 11: Battery system with integrated control and monitoring information model (V1

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Install environmental monitoring equipment

CEPT T/TR 02-03 E-1986 Environmental Conditions for the Equipment to Be Installed in Telecommunication Centres
CEPT T/CS 34-06-1981 Conditions D'Environnement De L'Equipement Terminal Installe Chez L'Abonne

国家能源局, Install environmental monitoring equipment

NB/T 10189-2019 Monitoring methods for atmospheric environmental conditions of power transmission and transformation equipment

British Standards Institution (BSI), Install environmental monitoring equipment

BS EN 60068-3-3:1991 Environmental testing - Guidance - Environmental testing - Miscellaneous - Guide to seismic test methods for equipment
BS 7518:1995 Radiation protection instrumentation - Portable, transportable or installed equipment to measure x or gamma radiation for environmental monitoring - Integrating assemblies
BS IEC 61017:2016 Radiation protection instrumentation. Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring
BS EN 60068-2-69:2007 Environmental testing - Tests - Test Te - Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
BS EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
BS EN IEC 61969-3:2020 Mechanical structures for electrical and electronic equipment. Outdoor enclosures. Environmental requirements, tests and safety aspects
BS ISO 18566-3:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Design of ceiling mounted radiant panels
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for climatic and environmental testing and other temperature conditioning equipment
BS 2011-2.1Td:1990 Environmental testing. Tests. Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Performance measuring and monitoring devices (PMD)
BS IEC 61322:2020 Radiation protection instrumentation. Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV
BS EN IEC 61557-12:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Power metering and monitoring devices (PMD)
BS EN IEC 61557-12:2022+A1:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Power metering and monitoring devices (PMD)
18/30334766 DC BS IEC 61322. Radiation protection instrumentation. Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV
BS EN IEC 61010-2-012:2022+A11:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for climatic and environmental testing and other temperature conditioning equipment
23/30445651 DC BS EN IEC 60079-42. Explosive atmospheres - Part 42. Electrical safety devices for the control of potential ignition sources for Ex-Equipment
BS EN IEC 61587-1:2022 Tracked Changes. Mechanical structures for electrical and electronic equipment. Tests for IEC 60917 and IEC 60297 series. Environmental requirements, test setups and safety aspects
BS EN 60068-2-58:2004 Environmental testing - Tests - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60068-2-58:2015 Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
18/30363308 DC BS EN 61969-3. Mechanical structures for electronic equipment. Outdoor enclosures. Part 3. Environmental requirements, tests and safety aspects
BS EN ISO 11855-2:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity
BS EN ISO 11855-2:2021 Building environment design. Embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity
BS EN 61557-8:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Insulation monitoring devices for IT systems
BS EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for IT systems
BS ISO 18566-4:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Control of ceiling mounted radiant heating and cooling panels
BS ISO 18566-2:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems - Determination of heating and cooling capacity of ceiling mounted radiant panels
BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Functional safety requirements for insulation monitoring devices in IT systems and equipment f
20/30405235 DC BS EN 61587-1. Mechanical structures for electrical and electronic equipment. Tests for IEC 60917 and IEC 60297 series. Part 1. Environmental requirements, test set-up and safety aspects

American Society for Testing and Materials (ASTM), Install environmental monitoring equipment

ASTM D5781/D5781M-13 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM E1819-96(2005) Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
ASTM E1819-96 Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
ASTM E181-23 Red Standard Guide for Detector Calibration and Analysis of Radionuclides in Radiation Metrology for Reactor Dosimetry (Standard + Redline PDF Bundle)
ASTM E181-23 Standard Guide for Detector Calibration and Analysis of Radionuclides in Radiation Metrology for Reactor Dosimetry
ASTM E1819-10 Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
ASTM D5784/D5784M-13 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5872-95(2006) Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5872/D5872M-13 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5781-95(2000) Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5781/D5781M-18 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
ASTM D5875-95(2006) Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5784-95(2000) Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5784/D5784M-18 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
ASTM D5299-99(2012)e1 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D5876-95(2005) Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5876-95(2012)e1 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5872-95(2000) Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5872/D5872M-18 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
ASTM D5875/D5875M-13 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5782-18 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5875-95(2000) Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5875/D5875M-18 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
ASTM D5783-18 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5299-99(2005) Standard Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D5299-99 Standard Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D5876-95(2000) Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5876/D5876M-17 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

Association Francaise de Normalisation, Install environmental monitoring equipment

NF ETS 300019-2-6:1995 Télécommunications - Ingénierie des équipements (EE) - Conditions et essais d'environnement des équipements de télécommunications - Partie 2-6 : spécification des essais d'environnement - Installations sur navires.
NF EN 300019-1-5:2004 Télécommunications - Ingénierie de l'environnement - Conditions d'environnement et essais d'environnement pour les équipements de télécommunication - Partie 1-5 : classification des conditions d'environnement - Installations sur véhicule ter...
NF Z87-019-25*NF EN 300019-2-5:2022 Environmental Engineering (EE)-Environmental conditions and environmental tests for telecommunications equipment-Part 2 : specification of environmental tests-Sub-part 5: Ground vehicle installations (V3.1.1)
NF EN IEC 60068-2-21:2021 Essais d'environnement - Partie 2-21 : essais - Essai U : robustesse des sorties et des dispositifs de montage incorporés
NF E35-404-3:2012 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection.
NF E35-404-3/IN1:2020 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection
NF E35-404-3:2020 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection
NF C23-544:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.
NF C23-586-2:2006 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2 : application guide for design, installation and maintenance.
NF EN ISO 28139:2021 Matériel de protection des cultures - Atomiseurs portés à dos motorisés - Exigences de sécurité et environnementales et méthodes d'essai
NF C93-476-3*NF EN 61969-3:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3 : environmental requirements, tests and safety aspects
NF EN IEC 61010-2-012/A11:2022 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-012 : exigences particulières pour les appareils d'essais climatiques et d'environnement, et autres appareils de conditionnement de température
NF EN IEC 61010-2-012:2022 Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-012 : exigences particulières pour les appareils d'essais climatiques et d'environnement, et autres appareils de conditionnement de température
NF C93-476-3*NF EN IEC 61969-3:2020 Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3 : environmental requirements, tests and safety aspects
NF C42-020-2-012*NF EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012 : particular requirements for climatic and environmental testing and other temperature conditioning equipment
NF C93-471-1*NF EN IEC 61587-1:2022 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1 : environmental requirements, test setups and safety aspects
NF C42-198-12*NF EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12 : performance measuring and monitoring devices (PMD)
NF C96-022-20-1*NF EN 60749-20-1:2009 Semiconductor devices - Mechanical and climatic test methods - Part 20-1 : handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
NF C96-022-15*NF EN 60749-15:2011 Semiconductor devices - Mechanical and climatic test methods - Part 15 : resistance to soldering temperature for through-hole mounted devices.
NF EN IEC 61969-3:2020 Structures mécaniques pour équipement électrique et électronique - Enveloppes de plein air - Partie 3 : exigences et essais d'environnement, et aspects liés à la sécurité
NF EN IEC 61031:2022 Installations nucléaires - Systèmes d'instrumentation et de contrôle-commande - Critères de conception, d'implantation et d'application pour les matériels de surveillance du débit de dose de rayonnement gamma à poste fixe, utilisés pendant l...
NF EN 60601-2-34:2014 Appareils électromédicaux - Partie 2-34 : exigences particulières pour la sécurité de base et de performances essentielles pour des appareils de surveillance de la pression sanguine prélevée directement
NF EN IEC 61587-1:2022 Structures mécaniques pour les équipements électriques et électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 1 : exigences environnementales, montages d'essai et aspects liés à la sécurité

European Telecommunications Standards Institute (ETSI), Install environmental monitoring equipment

ETSI EN 300 019-1-5-2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations V2.1.2
ETSI EN 300019-2-5 V 3.1.1:2021 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2: Specification of environmental tests - Sub-part 5: Ground vehicle installations
ETSI ES 202 336-12-2015 Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (power, cooling and building environment systems used in telecommunication networks); Part 12: ICT equipment power, energy and environmental parameters monitorin
ETSI ES 202 336-6-2012 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 6: Air Conditioning System control and monitoring information model (V
ETSI ES 202 336-4-2013 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power@ Cooling and Building Environment Systems used in Telecommunication Networks); Part 4: AC distribution power system control and monitoring information mod
ETSI ES 202 336-9-2012 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 9: Alternative Power Systems (V1.1.1)
ETSI ES 202 336-3-2009 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 3: AC UPS power system control and monitoring information model (V1.1.
ETSI ES 202 336-5-2010 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 5: AC diesel back-up generator system control and monitoring informati

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Install environmental monitoring equipment

GB/T 35686-2017 Electrical apparatus and installation in areas endangered by explosives

Lithuanian Standards Office , Install environmental monitoring equipment

LST ETS 300 019-2-5 Leid.1-2007 Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-5: Specification of environmental tests;Ground vehicle installations
LST ETSI EN 300 019-2-5 V3.1.1-2021 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 5: Ground vehicle installations
LST EN 300 019-1-5 V2.1.2-2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
LST EN 300 019-2-5 V2.1.2-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
LST EN 300 019-2-5 V3.0.0-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
LST EN 50394-1-2004 Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Part 1: Construction and testing
LST EN 61969-3-2012 Mechanical structures for electronic equipment - Outdoor enclosures -- Part 3: Environmental requirements, tests and safety aspects (IEC 61969-3:2011)

Institute of Electrical and Electronics Engineers (IEEE), Install environmental monitoring equipment

IEEE Std C57.12.29-2014 Pad-Mounted Equipment-Enclosure Integrity for Coastal Environments
IEEE Std C57.12.30-2010 Standard for pole-mounted equipment - Enclosure integrity for coastal environments
IEEE 1613.1-2013 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE P1613.1/D48, Oct 2013 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE Std 1613.1-2013 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE PC57.12.29/D7.3, September 2023 IEEE Draft Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments
IEEE P1613.1/D47, August 2013 IEEE Draft Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE Std C57.12.29-2005 IEEE Standard for Pad Mounted Equipment - Enclosure Integrity for Coastal Environments
IEEE Unapproved Draft Std P1613/D2.8, Apr 2009 Draft Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
IEEE Unapproved Draft Std P1613/D2.98, Apr 2009 Draft Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
IEEE Std 1613-2009 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations - Redline
IEEE PC57.12.29/D9, April 2013 IEEE Draft Standard for Pad Mounted Equipment - Enclosure Integrity for Coastal Environments
IEEE/ANSI C57.12.29-1991 American National Standard for Switchgear and Transformers - Pad-Mounted Equipment- Enclosure Integrity for Coastal Environments
IEEE Std PC57.12.29/D1.5, Dec 2004 Unapproved IEEE Draft Standard for Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments
IEEE 1613/INT 1-2010 Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations
IEEE Std PC57.12.29/D1.5 Approved IEEE Draft Standard for Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments (Revision of IEEE C57.12.19-1999) Superseded by C57.12.29-2005

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Install environmental monitoring equipment

IEEE 1613 INT 1-2010 Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations
IEEE C57.12.30-2010 Pole-Mounted Equipment-Enclosure Integrity for Coastal Environments

Korean Agency for Technology and Standards (KATS), Install environmental monitoring equipment

KS C IEC 61171-2005(2020) Radiation protection instrumentation－Monitoring equipment－Atmospheric radioactive iodines in the environment
KS C IEC 61172-2005(2020) Radiation protection instrumentation－Monitoring equipment－Radioactive aerosols in the environment
KS C IEC 61017-2-2005(2020) Radiation protection instrumentation－Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring－Part 2：Integrating assemblies
KS C IEC 61241-14-2006(2016) Electrical apparatus for use in the presence of combustible dust－ Part 14：Selection and installation
KS C IEC 61017-1-2005(2020) Portable, transportable or installed X or gamma radiation ratemeters for environmental monitoring－Part 1：Ratemeters
KS A IEC 60532:2003 Radiation protection instrumentation-Installed dose ratemeters, warning assemblies and monitors-X and gamma radiation of energy between 50 keV and 7 MeV
KS A IEC 60532:2016 Radiation protection instrumentation－Installed dose ratemeters, warning assemblies and monitors－X and gamma radiation of energy between 50 keV and 7 MeV
KS C IEC 61557-12:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 12:Performance measuring and monitoring devices(PMD)
KS C IEC 61557-12-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 12：Performance measuring and monito
KS C IEC 61557-15:2020 Electrical safety in low voltage distribution systems up to 1 000 V a.c.and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 15: Functional safety requiremen
KS C IEC 61557-8:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 8：Insulation monitoring devices for IT systems

American National Standards Institute （ANSI), Install environmental monitoring equipment

ANSI/IEEE C57.12.30:2010 Standard for Pole-Mounted Equipment - Enclosure Integrity for Coastal Environments
ANSI/IEEE C57.12.29:2005 Standard for Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments
ANSI C57.12.29-1991 Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments
ANSI/IEEE 1613:2009 Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
ANSI/UL 60079-7-2008 Standard for Safety for Electrical Apparatus Gas Explosive - Part 7: Increased safety "e"

ES-UNE, Install environmental monitoring equipment

UNE-EN 300019-2-5 V2.1.2:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsed by AENOR in September of 2003.)
UNE-EN 300019-2-5 V3.0.0:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsed by AENOR in September of 2003.)
UNE-EN IEC 60068-2-21:2021 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 61557-12:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (Endorsed by Asociación Española de N...
UNE-EN IEC 61557-12:2022/AC:2022-09 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (Endorsed by Asociación Española de N...
UNE-EN IEC 61557-12:2022/A1:2022/AC:2022-09 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (Endorsed by Asociación Española de N...
UNE-EN IEC 61557-12:2022/A1:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (Endorsed by Asociación Española de N...
UNE-EN IEC 61587-1:2022 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN IEC 61969-3:2020 Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 61010-2-012:2022/A11:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española de Nor...
UNE-EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española de Nor...
UNE-EN IEC 61010-2-012:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española de Nor...
UNE-EN ISO 28139:2021 Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods (ISO 28139:2019)

German Institute for Standardization, Install environmental monitoring equipment

DIN EN 300019-1-5:2004-03 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-5: Classification of environmental conditions; Ground vehicle installations (Endorsement of the English version EN 300019-1-5 V2.1.4...
DIN 22418:1989-04 Electrical apparatus for potentially explosive atmospheres for mining; screw plugs; safety requirements and testing
DIN EN 60068-2-69:2007 Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method (IEC 60068-2-69:2007); German version EN 60068-2-69:2007
DIN EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance; German version EN 50244:2000
DIN 22419-1:2004-12 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 1: Safety requirements and testing / Note: DIN 22419-1 (1995-11) remains valid alongside this standard until 2005-05-31.
DIN EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) (IEC 61557-12:2007); German versi
DIN IEC/TS 60079-42:2021 Explosive atmospheres - Part 42: Electrical Safety Devices for the control of potential ignition sources from Ex-Equipment (IEC TS 60079-42:2019)

Professional Standard - Environmental Protection, Install environmental monitoring equipment

HJ 707-2014 Technical Specifications for Environmental Noise Monitoring.Structure-borne Indoor Noise From Associated Facilities
HJ 655-2013 Technical specifications for installation and acceptance of ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
HJ 193-2013 Technical Specifications for Installation and Acceptance of Ambient air Quality Continuous Automated Monitoring System for SO2, NO2, O3 and CO
HJ 655-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Installation and Acceptance Technical Specifications "No. 1 Amendment"

International Electrotechnical Commission (IEC), Install environmental monitoring equipment

IEC 61172:1992 Radiation protection instrumentation - Monitoring equipment - Radioactive aerosols in the environment
IEC 60951-4:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post accident conditions - Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams
IEC TS 60079-42:2019 Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment
IEC 60364-5-53:2019 Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring
IEC 60364-5-53:2019/AMD1:2020 Low-Voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring
IEC 60364-5-53:2019+AMD1:2020 CSV Low-Voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring
IEC 60364-5-53:2020 Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring
IEC 62086-2:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance
IEC 60749-30:2011 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
IEC 61969-3:2020 Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
IEC 61969-3:2011 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
IEC 61322:2020 Radiation protection instrumentation - Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV
IEC 61557-12:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
IEC 61557-12:2018 RLV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring d
IEC 61557-12:2018+AMD1:2021 CSV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring d
IEC 61753-089-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for category C - Indoor controlled env
IEC 60068-2-47:1999 Environmental testing - Part 2-47: Test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
IEC 61010-2-012:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditionin
IEC 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditionin
IEC 61010-2-012:2019 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditionin

CZ-CSN, Install environmental monitoring equipment

CSN 33 2320-1996 Electrical installations in explosive gas atmospheres (other than mines)
CSN 33 2000-7-704-1996 Electrical equipment and installations. Part 7: Requirements for special installations or locations. Section 704: Construction and demolition site installations
CSN 33 2000-7-705-1995 Electrical equipment and installations. Part 7: Requirements for special installations or locations. Section 705: Electrical installations of agricultural and horticultural premises.
CSN 33 2000-5-551-1999 Electrical equipment and installation - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 551: Low-voltage generating sets
CSN 33 2000-7-703-1997 Electrical equipment and installations. Part 7: Requirements for special installations or locations. Section 703: Locations containing sauna heaters
CSN 33 2000-7-707-1997 Electrical installations of buildings - Part 7: Requirements for special installations or locations - Section 707: Earthing re- quirements for the installation of data processing equipment
CSN 33 2000-7-706-1996 ? Electrical equipment and installations. Part 7: Requirements for special installations or locations. Section 706: Restrictive con- ducting locations
CSN 33 2000-5-537-1994 Electrical equipment and installation. Part 5: Selection and erection of equipment. Chapter 53: Switchgear and controlgear. Section 537: Devices for isolation and switching
CSN 33 2000-7-702-1996 Electrical equipment and installations. Part 7: Requirements for special installations or locations. Section 702: Swimming pools and fountains
CSN 34 5621-1982 Electrical and electronical equipment. Resistance tests against evinronmental effects.Determination of resistance of electrical units against moulds.
CSN IEC 68-2-21:1992 Electrotechnical and electronic products. Basic environmental testing procedures. Part 2-21: Test U: Robustness of terminations and integral mounting devices
CSN 33 2000-4-47-1997 Electrical equipment and installations. Part 4: Protection for safety. Chapter 47: Application of protective measures for safety. Section 470: General. Section 471: Measures of protection against electric shock
CSN 33 2000-7-701-1997 Electrical equipment and installations. Part 7: Requirements for special installations or locations. Section 701: Locations containing a bath tub or shower basin or washing zone

石家庄市市场监督管理局, Install environmental monitoring equipment

DB1301/T 419-2022 Technical requirements for installation and deployment of solar greenhouse environmental control equipment

Standard Association of Australia （SAA）, Install environmental monitoring equipment

AS 2381.7:1989 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - Intrinsic safety i
AS 2381.6:1993 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - Increased safety e
AS 2381.2:1993 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - Flameproof enclosure d
AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance Set
AS 2381.2:1993/Amdt 1:1995
AS/NZS 2381.1:1999 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - General requirements
AS/NZS 2381.2:2006 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - Flameproof enclosure ?d?
AS/NZS 3580.1.1:2016 Methods for sampling and analysis of ambient air, Part 1.1: Guide to siting air monitoring equipment
AS 60068.2.21:2004 Environmental testing - Tests - Test U: Robustness of terminations and integral mounting devices
AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
AS 2381.10:1995 Electrical equipment for explosive atmospheres - Selection, installation and maintenance Part 10: Equipment in combustible dust (class II) areas
AS 2381.2/AMD 1:1995 Electrical equipment for explosive atmospheres-Selection, installation and maintenance Part 2: Flameproof enclosure d
AS 60068.2.47:2003 Environmental testing - Tests - Mounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests
AS/NZS 2381 Set(CD):2008 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance Set on CD
AS 2252.5:2017 Controlled environments, Part 5: Cytotoxic drug safety cabinets (CDSC) — Design, construction, installation, testing and use
AS/NZS 61241.14:2005 Electrical apparatus for use in the presence of combustible dust - Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD)
AS 1076.7:1977 Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) - Apparatus with type of protection 'n' - Non-sparking apparatus
AS/NZS 2381.1/AMD 2:2006 Electrical equipment for explosive gas atmospheres—Selection, installation and maintenance Part 1: General requirements; Amendment No. 2
AS 1076.1:1977 Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (Other than mining applications) - Basic requirements
AS/NZS 61241.14/AMD 2:2005 Amendment No.2 AS/NZS 61241.14:2005 Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation
AS 1076.8:1977 Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) - Apparatus with type of protection 's' - Special protection
AS/NZS 2381.1/AMD 1:2003 Amendment No.1 to AS/NZS 2381.1:1999 Electrical equipment for explosive atmospheres - Selection,installation and maintenance Part 1: General requirements
AS/NZS 2381.1/AMD 1:2005 Amendment No.1 to AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection,installation and maintenance Part 1: General requirements
AS/NZS 60079.1.1:2002 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap

未注明发布机构, Install environmental monitoring equipment

BS 7518:1995(1999)*IEC 1017-2:1994 Radiation protection instrumentation — Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring — Integrating assemblies
BS EN 50281-1-2:1999(2002) Electrical apparatus for use in the presence of combustible dust — Part 1 - 2 : Electrical apparatus protected by enclosures — Selection, installation and maintenance
BS EN ISO 10427-2:2004(2009) Petroleum and natural gas industries — Equipment for well cementing Part 2 : Centralizer placement and stop - collar testing

Canadian Standards Association (CSA), Install environmental monitoring equipment

CSA PLUS 2203 HAZLOC-01-2001 Hazardous Locations Guide for the Design, Testing, Construction, and Installation of Equipment in Explosive Atmospheres Third Edition
CSA PLUS 2203 HAZLOC-2001 Hazardous Locations Guide for the Design, Testing, Construction, and Installation of Equipment in Explosive Atmospheres (Third Edition)
CAN/CSA-C22.2 NO.60601-2-30-2002 Medical Electrical Equipment – Part 2-30: Particular Requirements for the Safety, Including Essential Performance, of Automatic Cycling Non-Invasive Blood Pressure Monitoring Equipment (Second Edition)

CN-QIYE, Install environmental monitoring equipment

Q/GDW 539-2010 Specifications for installation and acceptance of on-line monitoring system for substation equipment

Professional Standard - Chemical Industry, Install environmental monitoring equipment

HG/T 21508-1992 General diagram for wiring and installation of electrical equipment in explosion-hazardous atmospheres

Danish Standards Foundation, Install environmental monitoring equipment

DS/EN 300019-2-5 V3.0.0:2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
DS/EN 61969-3:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
DS/EN 60068-2-83:2012 Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
DS/EN 50394-1:2004 Electrical apparatus for potentially explosive atmospheres - Group I - Intrinically safe systems - Part 1: Construction and testing

Guangdong Provincial Standard of the People's Republic of China, Install environmental monitoring equipment

DB44/T 975-2011 Technical Specifications for Installation, Acceptance, Operation and Maintenance of Environmental Noise Automatic Monitoring System

AT-ON, Install environmental monitoring equipment

ONORM M 1346-2-1995 Control of measuring and test equipment - Testing instruction for ring gauges and setting ring gauges
OEVE/OENORM EN 300019-2-5 V3.1.1-2021 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; - Part 2: Specification of environmental tests; Sub-part 5: Ground vehicle installations (ETSI EN 300 019-2-5 V3.1.1 (2021-09))

YU-JUS, Install environmental monitoring equipment

JUS N.A5.787-1985 Basic environmental testing procedures. Test Uc: Robustness of terminations and integral mounting devices. Torsion
JUS N.A5.786-1984 Basic environmental testing procedures. Test Ub: Robustness of terminations and integral mounting de- vices. Bending
JUS N.S8.321-1981 Electrical apparatus for explosive gas atmospheres. Test of intrinsically safe and associated apparatus
JUS N.S8.321-1991 Electrical apparatus for potentially explosive gas atmospheres. Test of intrinsically safe and associated apparatus

International Telecommunication Union (ITU), Install environmental monitoring equipment

ITU-T K.64-2011 Safe working practices for outside equipment installed in particular environments (Study Group 5)
ITU-T K.64-2004 Safe working practices for outside equipment installed in particular environments SERIES K: PROTECTION AGAINST INTERFERENCE Study Group 5
ITU-T L.45-2000 Minimizing the effect on the environment from the outside plant in telecommunication networks Study Group 6

RU-GOST R, Install environmental monitoring equipment

GOST IEC 60079-14-2013 Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST R IEC 62086-2-2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heaters. Part 2. Application guide for design, installation and maintenance
GOST 30852.4-2002 Electrical apparatus for explosive gas atmospheres. Part 3. Spark-test apparatus for intrinsically-safe circuits
GOST R 54069-2010 Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Part 1. Construction and testing
GOST IEC 61241-1-2-2011 Electrical apparatus for use in the presence of combustible dust. Part 1. Electrical apparatus protected by enclosures and surface temperature limitation. Section 2. Selection, installation and maintenance
GOST R IEC 61557-6-2009 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT and TN systems

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Install environmental monitoring equipment

ITU-T K.64-2016 Safe working practices for outside equipment installed in particular environments (Study Group 5)

HU-MSZT, Install environmental monitoring equipment

NZ-SNZ, Install environmental monitoring equipment

AS/NZS 3200.2.30:2001 Medical Electrical Equipment Part 2.30: Particular Requirements for Safety - Automatic Cycling Non-Invasive Blood Pressure Monitoring Equipment

CU-NC, Install environmental monitoring equipment

NC 93-28-1988 Standards System for Environment Protection. Community Hygiene. Accomodation Installations. Hygienic Sanitary Requirements

Professional Standard-Safe Production, Install environmental monitoring equipment

AQ 4231-2013 Safety specification for construction and handling equipment maintenance of explosive dust environment in bulk grain port

CENELEC - European Committee for Electrotechnical Standardization, Install environmental monitoring equipment

EN 61241-14:2004 Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation
EN 62086-2:2005 Electrical apparatus for explosive gas atmospheres – Electrical resistance trace heating Part 2: Application guide for design@ installation and maintenance
EN 60079-18:2004 "Electrical apparatus for explosive gas atmospheres Part 18: Construction@ test and marking of type of protection encapsulation ""m"" electrical apparatus"
EN 60601-2-30:2000 Medical Electrical Equipment Part 2-30: Particular Requirements for the Safety@ Including Essential Performance@ of Automatic Cycling Non-Invasive Blood Pressure Monitoring Equipment

TR-TSE, Install environmental monitoring equipment

TS 3492-1980 GENERAL REQUIREMENTS FOR ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES CONSTRUCTION AND TEST OF INTRINSICALLY SAFE AND ASSOCIATED APPARATUS
TS 2115-1975 BASIC ENV?R?NMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQU1PMENT TEST U : ROBUSTNESS OF TERMJNATIONS AND INTECRAL MOUNT?NG DEVICES

National Electrical Manufacturers Association（NEMA), Install environmental monitoring equipment

NEMA C57.12.29-1999 Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments Errata: January 18,2000

RO-ASRO, Install environmental monitoring equipment

STAS 8393/30-1988 Environmental testing procedures MOUNTING OF COMPONENTS ANDEQUIPMENT FOR DYNAMIC TESTS (SHOCK, BUMP, VIBRATION AND STEADY-STATE ACCELERATION)
STAS 11115/7-1990 Aiecraft ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQUIPMENT Operational shocks and crash safety
STAS SR CEI 1017-1-1995 Portable, transportable or installed X or gamma radiation ratemeters for environmental monitoring Part 1: Ratemeters
STAS 6877/11-1979 Electrical gas apparatus for explosive gas atmosphere FLAMEPROOF ENCLOSURE Ascertainment of maximum experimen- tal safe gap

PL-PKN, Install environmental monitoring equipment

PN E04619-1987 Electrical and electronic products Basic erwironmental testing procedures Part 2: Tests. Test U: Robustness of terminations and integral mounting devices [Translation of Publication IEC 68-2-21 (1983)]
PN Z02012-03-1988 Individual respiratory protective e?uipment used in air environment Self-contained openbreathing apparatus Re?uirements and tests
PN E08111-1987 Elektrical apparatus for explosive atmospheres Type of protection: encapsulation Classification requirements and methods of testing

ZA-SANS, Install environmental monitoring equipment

SANS 62086-2:2003 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating Part 2: Application for design, installation and maintenance

European Committee for Standardization (CEN), Install environmental monitoring equipment

CEN EN 378-2-2008_ Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

National Fire Protection Association (NFPA), Install environmental monitoring equipment

NFPA 720-2012 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment Effective Date: 08/31/2011

Taiwan Provincial Standard of the People's Republic of China, Install environmental monitoring equipment

CNS 3376-17-2002 Electrical apparatus for explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
CNS 3376.17-2002 Electrical apparatus for explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)

Underwriters Laboratories (UL), Install environmental monitoring equipment

UL 60079-18-2002 "UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 18: Encapsulation ""m"" (First Edition)"
UL 60079-18-2005 "UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 18: Construction@ Test and Marking of Type of Protection Encapsulation ""m"" Electrical Apparatus (Second Edition)"
UL 60079-31-2015 UL Standard for Safety Explosive Atmospheres - Part 31: Equipment Dust Ignition Protection by Enclosure “t” (Second Edition)
UL 60079-15 BULLETIN-2004 UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction@ Test and Marking of Type of Protection ?n? Electrical Apparatus
UL 60079-18 BULLETINS-2003 "UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 18: Construction@ Test and Marking of Type of Protection Encapsulation ""m"" Electrical Apparatus (04/18/2003 (6p); 01/23/2003 (6p))"
UL 60079-18 BULLETIN-2016 "UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 18: Construction@ Test and Marking of Type of Protection Encapsulation ""m"" Electrical Apparatus (COMMENTS DUE: JANUARY 16@ 2017)"
UL 60079-18 BULLETIN-2015 "UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 18: Construction@ Test and Marking of Type of Protection Encapsulation ""m"" Electrical Apparatus (COMMENTS DUE: NOVEMBER 23@ 2015)"
UL 60079-18 BULLETIN-2007 "UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 18: Construction@ Test and Marking of Type of Protection Encapsulation ""m"" Electrical Apparatus (COMMENTS DUE: July 05@ 2007)"
UL 60079-18 BULLETIN-2018 UL Standard for Safety Explosive atmospheres – Part 18: Equipment protection by encapsulation “m” (COMMENTS DUE: JANUARY 7@ 2019)
UL 60079-18 (ND)-2005 National Differences For UL 60079-18 Electrical Apparatus for Explosive Gas Atmospheres - Part 18: Construction@ Test and Marking of Type of Protection Encapsulation ’m’ Electrical Apparatus (Second Edition)
UL 60079-15 BULLETINS-2003 UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction@ Test and Marking of Type of Protection ?n? Electrical Apparatus (04/18/2003 (6p); 01/23/2003 (6p))
UL 61010-2-012-2017 UL Standard for Safety Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment

Beijing Provincial Standard of the People's Republic of China, Install environmental monitoring equipment

DB11/T 948.10-2013 Technical Specifications for Elevator Operation Safety Monitoring Information Management System Part 10: Specifications for Installation and Acceptance of Acquisition Equipment

European Committee for Electrotechnical Standardization（CENELEC）, Install environmental monitoring equipment

EN 61969-3:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
EN IEC 61969-3:2020 Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN IEC 61010-2-012:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN IEC 61587-1:2022 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects
EN IEC 61753-089-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for category C - Indoor controlled environment

AT-OVE/ON, Install environmental monitoring equipment

OVE EN IEC 61753-089-02:2021 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Indoor controlled environment (IEC 86B/4477/CDV) (english version)

Indonesia Standards, Install environmental monitoring equipment

SNI 04-6545.8-2003 Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring, or monitoring of protective measures. Part 8: Insulation monitoring devices for IT systems

IN-BIS, Install environmental monitoring equipment

IS 11064-1984

KR-KS, Install environmental monitoring equipment

KS C IEC 61557-15-2020 Electrical safety in low voltage distribution systems up to 1 000 V a.c.and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 15: Functional safety requiremen

AENOR, Install environmental monitoring equipment

UNE-HD 60364-5-537:2017 Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection, isolation, switching, control and monitoring - Clause 537: Isolation and switching