ZH
RU
ES
motor hole
motor hole, Total:70 items.
In the international standard classification, motor hole involves: Iron and steel products, Cinematography, Radiocommunications, Machine tools, Electrical wires and cables, Audio, video and audiovisual engineering, Data storage devices, Rotating machinery, Chipless working equipment, Electrical engineering in general, Hand-held tools, Aerospace electric equipment and systems, Materials for aerospace construction, Particle size analysis. Sieving, Domestic safety, Semiconductor devices.
CZ-CSN, motor hole
IN-BIS, motor hole
AIA/NAS - Aerospace Industries Association of America Inc., motor hole
- NAS948-1975 Printed Circuit Board Drilling Machine Numerically Controlled (Rev 1)
Professional Standard - Machinery, motor hole
- JB/T 8706-2014 The non-central hole rotor forgings for 50 MW to 200 MW turbine generator.Technical specification
- JB/T 8708-2014 The non-central hole rotor forgings for 300 MW to 600 MW turbine generator.Technical specification
- JB/T 8708-1998 Specification of the noncentral hole rotors forgings used from 300~600MW turbine generator
- JB/T 8706-1998 Specification of the noncentral hole rotors forgings used from 50 to 200MW turbine generator
- JB/T 8705-2014 The non-central hole rotor forgings for below 50 MW turbine generator.Technical specification
- JB/T 8705-1998 Specification of the noncentral hole rotors forgings used below 50MW turbine generator
- JB/T 8997.1-1999 Machine spools with large bore for processing of electric wires and cables.Part 1:General requirement
- JB/T 8997.1-2013 Machine spools with large bore for processing of wires and cables.Part 1: General specifies
- JB/T 8997.2-1999 Machine spools with large bore for processing of electric wires and cables.Part 2:Steel plate welded machine spools
- JB/T 8997.2-2013 Machine spools with large bore for processing of wires and cables.Part 2: Machine spools with welded steel plate
- JB/T 10330.2-2004 High speed electro-discharge small hole drilling machines Part 2:Parameters
- JB/T 10330.1-2002 High speed small hole drilling electro-discharge machines -Part 1:Techenical requirements
- JB/T 10330.3-2004 High speed electro-discharge small hole drilling machines-Part 3:Testing of accuracy
- JB/T 8997.4-1999 Machine spools with large bore for processing of electric wires and cables.Part 4:Reinforced machine spools with pressed steel flanges
- JB/T 8997.3-1999 Machine spools with large bore for processing of electric wires and cables.Part 3:Common machine spools with pressed steel flanges
- JB/T 8997.3-2013 Machine spools with large bore for processing of wires and cables.Part 3: Common machine spools with stamped steel plate
- JB/T 8997.4-2013 Machine spools with large bore for processing of wires and cables.Part 4: Reinforced machine spools with stamped steel plate
- JB/T 10330-2012 Small hole high speed drilling electro-discharge machines.Technical requirements
- JB/T 11998.1-2014 Numerical control micro-hole drilling electro-discharge machines.Part 1: Testing of accuracy
- JB/T 11998.2-2014 Numerical control micro-hole drilling electro-discharge machines.Part 2: Technical requirements
未注明发布机构, motor hole
- BS 1090:1970(2011) Specification for Flameproof hand - held electric drilling machines primarily for use in mines
German Institute for Standardization, motor hole
- DIN ISO 5768:1998 Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions (ISO 5768:1996)
- DIN 332-2:1983-05 Center holes 60° with thread for shaft ends for rotating electrical machines
- DIN 15655-4:1988-04 Magnetic film 16 mm, perforated along one edge; mechanical and electroacoustic requirements
Aerospace Industries Association, motor hole
- AIA NAS 948-1975 (Inactive)Printed Circuit Board Drilling Machine Numerically Controlled (Rev. 1)
Taiwan Provincial Standard of the People's Republic of China, motor hole
RU-GOST R, motor hole
- GOST 24953-1981 Electroerosion copy-piersing machines. Standards of accuracy
- GOST 10860-1983 Punched tape for computing technique, data transmitting equipment and teletypes. Shape, dimensions and position of holes
- GOST 24772-1981 Electrochemical copy-piercing machines. Basic dimensions
- GOST 30098-1993 Electroerosion copy piercing machines. Basic dimensions. Standards of accuracy
ECIA - Electronic Components Industry Association, motor hole
- 453-1978 Dimensional@ Mechanical and Electrical Characteristics Defining Phone Plugs & Jacks
Professional Standard - Electricity, motor hole
- DL/T 717-2000 Technical guide for the nondestructive testing of turbine-generator rotor bores
- DL/T 717-2013 Technical Guidelines for Inspection of Turbine Generator Rotor Center Hole
Society of Motion Picture and Television Engineers (SMPTE), motor hole
- SMPTE 7-1999 Motion-Picture Film (16-mm) - Camera Aperture Image and Usage
- SMPTE ST 7-2004 Motion-Picture Film (16-mm) - Camera Aperture Image and Usage
- SMPTE 231-1999 Motion-Picture Film (8-mm Type R) - Camera Aperture Image and Usage
- SMPTE ST 157-1999 Motion-Picture Film (8-mm Type S) - Camera Aperture Image and Usage
- SMPTE ST 231-2004 Motion-Picture Film (8-mm Type R) - Camera Aperture Image and Usage
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, motor hole
- GB/T 23480.1-2009(英文版) Small hole high speed drilling electro discharge machines—Part 1:Terminology and testing of accuracy
- GB/T 23480.2-2009 Small hole high speed drilling electro-discharge machines.Part 2:Parameters
- GB/T 23480.1-2009 Small hole high speed drilling electro-discharge machines.Part 1:Terminology and testing of accuracy
RO-ASRO, motor hole
- STAS 8198-1978 Centre holes with thread for shafts of rotating electrical machines
CU-NC, motor hole
- NC 64-10-1990 Photography Application and Technique. Cinematography Image Produced by Camera Aperture Type W on 16 mm Motion-Picture Film. Position and Dimensions
PL-PKN, motor hole
- PN E08405-03-1989 Hand-held motor-operated electric tools Tappers Complementary requirements
British Standards Institution (BSI), motor hole
- BS EN ISO 11148-3:2012 Hand-held non-electric power tools. Safety requirements Drills and tappers
- BS ISO 2467:2004 Cinematography - Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints - Positions and dimensions
- BS EN 62047-26:2016 Semiconductor devices. Micro-electromechanical devices. Description and measurement methods for micro trench and needle structures
International Organization for Standardization (ISO), motor hole
- ISO 1787:1972 Cinematography — Camera usage of 8 mm motion- picture film perforated Type S
- ISO 2467:2004 Cinematography - Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints - Positions and dimensions
Institute of Electrical and Electronics Engineers (IEEE), motor hole
- SMPTE ST 215:1995 ST 215:1995 - SMPTE Standard - For Motion-Picture Film (65-mm) — Camera Aperture Image
- SMPTE ST 417:2005 ST 417:2005 - SMPTE Standard - For Motion-Picture Film (65-mm) — Camera Aperture Image and Usage, 15/70 Format
- SMPTE ST 201:1996 ST 201:1996 - SMPTE Standard - For Motion-Picture Film (16-mm)— Type W Camera Aperture Image
- SMPTE ST 7:2004 ST 7:2004 - SMPTE Standard - For Motion-Picture Film (16-mm) — Camera Aperture Image and Usage
- SMPTE ST 59:1998 ST 59:1998 - SMPTE Standard - For Motion-Picture Film (35-mm) — Camera Aperture Images and Usage
- SMPTE ST 418:2005 ST 418:2005 - SMPTE Standard - For Motion-Picture Film (65-mm) — Camera Aperture Image and Usage, 8/70 Format
United States Navy, motor hole
- NAVY MS25185 REV C-1978 PLUG VENTING, GRAVITY-CONTROLLED, ELECTROLYTE ACCESS HOLE, CELL, AIRCRAFT LEAD ACID STORAGE BATTERY
Korean Agency for Technology and Standards (KATS), motor hole
- KS A ISO 74:2006 Cinematography-Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film-Positions and dimensions
Electronic Components, Assemblies and Materials Association, motor hole
- ECA 364-60-1988 TP-60 General Methods for Porosity Testing of Contact Finishes for Electrical Connectors
ES-UNE, motor hole
- UNE-EN 50003:1973 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF MOTOR CONTACTORS. (Endorsed by AENOR in September of 1994.)
Association Francaise de Normalisation, motor hole
- NF X11-506*NF ISO 2194:1991 Industrial screens. Wowen wire cloth, perforated plate and electroformed sheet. Designation and nominal sizes of openings.
Group Standards of the People's Republic of China, motor hole
- T/CAB 0148-2022 Household and similar electrical appliances -Sefety-Test methods for hazards of holes,clearances and mechanisms