ZH
RU
ES
Industrial ct series measurement
Industrial ct series measurement, Total:151 items.
In the international standard classification, Industrial ct series measurement involves: Non-destructive testing, Farming and forestry, Thermodynamics and temperature measurements, Measurement of force, weight and pressure, Vacuum technology, Energy and heat transfer engineering in general, Materials for aerospace construction, Linear and angular measurements, Photography, Shipbuilding and marine structures in general, Electricity. Magnetism. Electrical and magnetic measurements, Applications of information technology, Industrial automation systems, Measurement of time, velocity, acceleration, angular velocity, Agricultural machines, implements and equipment, Open systems interconnection (OSI), Microprocessor systems, Character sets and information coding, Noise with respect to human beings, Wastes, Software development and system documentation, Vibration and shock with respect to human beings, Hand-held tools, Metrology and measurement in general, Networking, Nuclear energy engineering, Industrial furnaces, Environmental protection, Fluid power systems, Radiocommunications, Quality, Air quality.
Group Standards of the People's Republic of China, Industrial ct series measurement
- T/CSTM 00269-2020 Computed tomography in dimensional measurement Of selective laser melting manufactured structures
- T/NJ 1115-2020 Variable rate fertilization—Working condition monitoring device—Technical specification
- T/QGCML 1499-2023 Intelligent detection system for industrial landfill leachate full treatment equipment
HU-MSZT, Industrial ct series measurement
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Industrial ct series measurement
- GB/T 35839-2018 Non-destructive testing—Test method for measuring industrial computed tomography (CT) density
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Industrial ct series measurement
- GB/T 29067-2012 Non-destructive testing.Test method for measuring industrial computed tomography (CT) image
- GB/T 29068-2012 Non-destructive testing.Guide for industrial computed tomography (CT) system selection
- GB/T 29069-2012 Non-destructive testing.Test method for measurement of industrial computed tomography (CT) system performance
- GB/T 25479-2010 Paperless recorder for use in industrial-process measurement and control systems
- GB/T 20171-2006 EPA system architecture and communication specification for use in industrial control and measurement systems
- GB/T 19769.2-2005 Function blocks for industrial-process measurement and control system.Part 2:Software tools requirements
- GB/T 19769.1-2005 Function blocks for industrial-process measurement and control system--Part 1:Architecture
- GB/T 2613-2008 Electronic instrument general technical specification for industrial-process measurement and control system
- GB/T 13639-2008 Digital indicators with analogue input for use in industrial-process measurement and control systems
- GB/T 13639-1992 Digital indicators with analogue input for use in industrial-process measurement and control systems
- GB/T 19769.3-2012 Function block for industrial-process measurement and control systems.Part 3:Tutorial information
CZ-CSN, Industrial ct series measurement
- CSN 18 6507-1987 Industrial robots.Series of nominal load capacity
- CSN 20 0300 Cast.16-1984 Measurements of geometrical accuracy of machine tools. Measuring methods. Di-mensional stability of cylindrical test workpieces of the samé series
- CSN 11 9181-1983 Unified system of industrial hydraulic components. Hydrostatic flow rate control elements. Test methods
Association Francaise de Normalisation, Industrial ct series measurement
- FD Z68-050:2019 Qualité des données industrielles - Guide pour la série ISO 8000
- NF X10-520:1974 Vacuum technology. Pressure measurement in industrial vacuum systems.
- NF C46-303:1986 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. METHODS OF EVALUATING THE PERFORMANCE OF TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS.
- NF J41-012:1975 Shipbuilding. Sea water piping systems. Measures for corrosion reduction.
- NF C46-304:1991 Transmetteurs utilisés dans les systèmes de conduite des processus industriels. Guide pour l'inspection et les essais individuels de série
- NF C46-640-7:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7 : assessment of system safety.
- NF C46-640-4:1998 Industrial process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 4 : assessment of system performance.
European Association of Aerospace Industries, Industrial ct series measurement
- AECMA PREN 9000-2-2000 Aerospace Series Aeroapace Industry Quality System Part 2: Requirements Applicable to Maintenance Organizations Edition P2
- AECMA PREN 9000-1-1999 Aerospace Series Aerospace Industry Quality System Part 1: Requirements Applicable to Suppliers Edition P 3
- AECMA PREN 9000-1-1998 Aerospace Series Aerospace Industry Quality System Part 1: Requirements for Suppliers Edition P 1
- AECMA PREN 9000-3-1998 Aerospace Series Aerospace Industry Quality System Part 3: Requirements for Stockists-Distributors Edition P 1
International Telecommunication Union (ITU), Industrial ct series measurement
- ITU-T E.491 FRENCH-1997 Traffic Measurement by Destination Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Traffic - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Study
- ITU-T E.491 SPANISH-1997 Traffic Measurement by Destination Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Traffic - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Study
- ITU-T E.500 FRENCH-1998 Traffic Intensity Measurement Principles - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Traffic
- ITU-T E.500 SPANISH-1998 Traffic Intensity Measurement Principles - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Traffic
- ITU-T E.490.1 FRENCH-2003 Overview of Recommendations on traffic engineering SERIES E: OVERALL NETWORK OPERATION TELEPHONE SERVICE SERVICE OPERATION AND HUMAN FACTORS Traffic engineering Measurement and recording of traffic
- ITU-T E.490.1 SPANISH-2003 Overview of Recommendations on traffic engineering SERIES E: OVERALL NETWORK OPERATION TELEPHONE SERVICE SERVICE OPERATION AND HUMAN FACTORS Traffic engineering Measurement and recording of traffic
- ITU-T E.501 FRENCH-1997 Estimation of Traffic Offered in the Network - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Tra
- ITU-T E.501 SPANISH-1997 Estimation of Traffic Offered in the Network - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Tra
- ITU-T E.502 FRENCH-2001 Traffic Measurement Requirements for Digital Telecommunication Exchanges Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Traffic Engineering - Measurement and Recording of Traffic Study Group 2
- ITU-T E.502 SPANISH-2001 Traffic Measurement Requirements for Digital Telecommunication Exchanges Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Traffic Engineering - Measurement and Recording of Traffic Study Group 2
- ITU-T E.745 FRENCH-2000 Cell Level Measurement Requirements for the B-ISDN Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Traffic Engineering - ISDN Traffic Engineering Stu
- ITU-T E.745 SPANISH-2000 Cell Level Measurement Requirements for the B-ISDN Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Traffic Engineering - ISDN Traffic Engineering Stu
- ITU-T P.51 FRENCH-1996 ARTIFICIAL MOUTH
- ITU-T P.51 SPANISH-1996 ARTIFICIAL MOUTH
- ITU-T E.456 FRENCH-1998 Test Transaction for Facsimile Transmission Performance - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors - Quality of Service Network Management and Traffic Engineering - Network Management - Checking the Quality
- ITU-T E.456 SPANISH-1998 Test Transaction for Facsimile Transmission Performance - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors - Quality of Service Network Management and Traffic Engineering - Network Management - Checking the Quality
- ITU-T E.460 FRENCH-2000 Measurements and Metrics for Monitoring the Performance of V.34 Group 3 Facsimile Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Network Management
- ITU-T E.460 SPANISH-2000 Measurements and Metrics for Monitoring the Performance of V.34 Group 3 Facsimile Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network Management and Traffic Engineering - Network Management
- ITU-T E.750 FRENCH-2000 Introduction to the E.750-Series of Recommendations on Traffic Engineering Aspects of Networks Supporting Personal Communications Services Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network
- ITU-T E.750 SPANISH-2000 Introduction to the E.750-Series of Recommendations on Traffic Engineering Aspects of Networks Supporting Personal Communications Services Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Quality of Service Network
- ITU-T E.450 FRENCH-1998 Facsimile Quality of Service on Public Networks - General Aspects - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors - Quality of Service Network Management and Traffic Engineering - Network Management - Checking t
- ITU-T E.450 SPANISH-1998 Facsimile Quality of Service on Public Networks - General Aspects - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors - Quality of Service Network Management and Traffic Engineering - Network Management - Checking t
- ITU-T E.491-1997 Traffic Measurement by Destination Quality of Service Network Management and Traffic Engineering - Traffic Engineering - Measurement and Recording of Traffic - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Study
- ITU-T X.138-1997 Measurement of Performance Values for Public Data Networks When Providing International Packet-Switched Services - Series X: Data Networks and Open System Communication Public Data Networks - Network Aspects Study Group 7; 43 pp
IT-UNI, Industrial ct series measurement
Professional Standard - Machinery, Industrial ct series measurement
- JB/T 6215-2011 Non-destructive testing instruments.The series typal table to industrial X-ray tube
- JB/T 7808-2010 Non-destructive testing instruments Main parameter series for the industrial X-ray equipment
- JB/T 11960-2014 Security for industrial process measurement and control.Network and system security
- JB/T 8219-1999 Electrical actuators for industrial - process measurement and control systems
- JB/T 6875-2014 XCZ type moving-coil indicators for industrial-process measurement and control systems
- JB/T 6875-1993 XCZ type moving coil indicators for industrial-process measurement and control systems
- JB/T 8213-2014 XCT type moving coil indicating controllers for use in industrial-process measurement and control systems
- JB/T 8213-1999 XCT type moving coil indicating controllers for use in industrial - process measurement and control systems
Association of German Mechanical Engineers, Industrial ct series measurement
- VDI/VDE 3511 Blatt 3-1994 Temperature measurement in industry - Measuring systems and measured quantity treatment for electrical contact thermometers
NATO - North Atlantic Treaty Organization, Industrial ct series measurement
- AQAP-6 CANC NOTICE 1-1995 NATO Measurement and Calibration System Requirements for Industry (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int
- AQAP-6-1976 NATO Measurement and Calibration System Requirements for Industry (ED 2 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@
国家市场监督管理总局、中国国家标准化管理委员会, Industrial ct series measurement
- GB/T 39777-2021 Technical requirements of measurement and verification of energy savings—Industrial boiler system
- GB/T 38844-2020 Smart factory—General specification for time synchronization, time management and test in industry automation system
Shandong Provincial Standard of the People's Republic of China, Industrial ct series measurement
- DB37/T 2646-2015 Technical requirements for energy saving measurement and verification of industrial boiler systems
未注明发布机构, Industrial ct series measurement
- BS 7986:2005(2011) Data quality metrics for industrial measurement and control systems — Specification
British Standards Institution (BSI), Industrial ct series measurement
- BS 7986:2005 Data quality metrics for industrial measurement and control systems - Specification
- BS EN 62382:2013 Control systems in the process industry. Electrical and instrumentation loop check
- BS DD IEC/PAS 62443-3:2008 Security for industrial process measurement and control - Network and system security
- DD IEC/PAS 62443-3:2008 Security for industrial process measurement and control - Network and system security
- BS EN 61987-10:2010 Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals
- BS EN 61987-10:2009 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals
- BS ISO 13579-1:2013 Industrial furnaces and associated processing equipment Method of measuring energy balance and calculating efficiency. General methodology
- BS EN 61069-3:1997 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system functionality
- BS EN 61069-7:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system safety
- PD IEC TS 62872-1:2019 Tracked Changes. Industrial-process measurement, control and automation. System interface between industrial facilities and the smart grid
- BS EN 61069-4:1998 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system performance
- BS EN 61069-6:1998 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system operability
- BS EN 61069-4:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment. Assessment of system performance
- PD CEN ISO/TR 9241-514:2022 Ergonomics of human-system interaction. Guidance for the application of anthropometric data in the ISO 9241-500 series
European Committee for Standardization (CEN), Industrial ct series measurement
- EN 2329:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unita area
- EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area
Standard Association of Australia （SAA）, Industrial ct series measurement
- AS 2372:1980 Engineers' vertical comparators (analogue type) for external measurement - Metric series
International Organization for Standardization (ISO), Industrial ct series measurement
- ISO 11699-1:1998 Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography
- ISO 11699-1:2008 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
- ISO/TR 27609:2007 Vibration in hand-held tools — Vibration
measurement methods for grinders —
Evaluation of round-robin test
Aerospace, Security and Defence Industries Association of Europe (ASD), Industrial ct series measurement
- ASD-STAN PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products (Edition P1)
- ASD-STAN PREN 9000-1-1999 Aerospace Series Aerospace Industry Quality System Part 1: Requirements Applicable to Suppliers (Edition P 3)
- ASD-STAN PREN 9000-2-2000 Aerospace Series Aeroapace Industry Quality System Part 2: Requirements Applicable to Maintenance Organizations (Edition P2)
International Electrotechnical Commission (IEC), Industrial ct series measurement
- IEC 62382:2012 Control systems in the process industry - Electrical and instrumentation loop check
- IEC TS 62872:2015 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
- IEC TR 61158-1:2003 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 1: Overview anf guidance for the IEC 61158 series
- IEC PAS 61499-1:2000 Function blocks for industrial-process measurement and control systems - Part 1: Architecture
- IEC PAS 62443-3:2008 Security for industrial process measurement and control - Network and system security
- IEC TS 62872-1:2019 Industrial-process measurement, control and automation - Part 1: System interface between industrial facilities and the smart grid
- IEC 61987-10:2009/COR1:2012 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals
- IEC 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
- IEC 61069-4:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
Korean Agency for Technology and Standards (KATS), Industrial ct series measurement
- KS C IEC TR 61158-1-2014(2019) Digital data communications for measurement and control — Fieldbus for use in industrial control systems — Part 1: Overview and guidance for IEC 61158 series
- KS C IEC TS 62872:2020 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
- KS C IEC TS 62872-1:2021 Industrial-process measurement, control and automation — Part 1: System interface between industrial facilities and the smart grid
- KS C IEC 61069-4-2005(2010) Industrial process measurement and control－Evaluation of system properties for the purpose of system assessment－Part 4：Assessment of system performance
- KS C IEC 61069-3-2005(2010) Industrial-process measurement and control－Evaluation of system properties for the purpose of system assessment－Part 3：Assessment of system functionality
KR-KS, Industrial ct series measurement
- KS C IEC TS 62872-2020 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
- KS C IEC TS 62872-1-2021 Industrial-process measurement, control and automation — Part 1: System interface between industrial facilities and the smart grid
ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Industrial ct series measurement
- ITU-T P.57-1996 Artificial Ears - Series P: Telephone Transmission Quality Objective Measuring Apparatus (Study Group 12; 32 pp)
RO-ASRO, Industrial ct series measurement
RU-GOST R, Industrial ct series measurement
- GOST 12.1.050-1986 Occupational safety standards system. Methods of noise measurement at work-places
- GOST R 56498-2015 Industrial communication networks. Network and system security. Part 3: Security for industrial process measurement and control
- GOST R 8.660-2009 State system for ensuring the uniformity of measurements. Industrial application level gauges. Salibration methods
- GOST R 8.832-2013 State system for ensuring the uniformity of measurements. State verification system for measuring equipment of AC industrial voltage from 1 to 500 kV
- GOST 22.2.04-2012 State system for ensuring the uniformity of measurements. Management and procedure of internal metrological surveillance of the interprises with hazardous industial objects
- GOST R IEC 61069-1-2012 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 1. General considerations and methodology
- GOST 8.612-2012 State system for ensuring the uniformity of measurements. Management and procedure of internal metrological surveillance of the interprises with hazardous industial objects
- GOST 8.321-2013 State system for ensuring the uniformity of measurements. Industrial application level gauges. Verification procedure
- GOST 12.1.016-1979 Occupational safety standards system. Working zone air. Requirements for measurement techniques of unhealthy matters concentrations
American Society for Testing and Materials (ASTM), Industrial ct series measurement
- ASTM D7243-11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
- ASTM C1210-18 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
- ASTM C1210-06 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
- ASTM C1210-96e1 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
- ASTM C1210-21 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry
- ASTM C1210-12 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
YU-JUS, Industrial ct series measurement
- JUS L.F2.013-1995 Measurement of temperature in industrial process - Extension and compensating cables for thermocouples - Tolerances and identification system
IEC - International Electrotechnical Commission, Industrial ct series measurement
- TS 62872-2015 Industrial-process measurement@ control and automation system interface between industrial facilities and the smart grid (Edition 1.0)
- PAS 61499-2-2001 Function Blocks for Industrial-Process Measurement and Control Systems - Part 2: Software Tools Requirements (Edition 1.0)
- PAS 61499-1-2000 Function Blocks for Industrial-Process Measurement and Control Systems Part 1: Architecture (Edition 1.0)
Professional Standard - Nuclear Industry, Industrial ct series measurement
- EJ/T 1073-1998 Standard guide for establishing a measurement system quality control program for chemical analysis and physical measurement laboratories within the nuclear industry
AT-ON, Industrial ct series measurement
- ONORM EN 3042-1992 Aerospace series - Quality assurance - EN aerospace products - Qualification procedura
- ONORM A 9032-1995 Safety functions in safety relevant Systems by means of industrial measurement and control technology
CENELEC - European Committee for Electrotechnical Standardization, Industrial ct series measurement
- CLC/TR 61158-1-2004 Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Industrial ct series measurement
- PREN 9000-2-2000 Aerospace Series Aeroapace Industry Quality System Part 2: Requirements Applicable to Maintenance Organizations (Edition P2)
- PREN 9000-1-1998 Aerospace Series Aerospace Industry Quality System Part 1: Requirements to ISO 9001/ISO 9002 Models (Edition P 1)
- PREN 9000-1-1999 Aerospace Series Aerospace Industry Quality System Part 1: Requirements Applicable to Suppliers (Edition P 3)
- PREN 9000-3-1998 Aerospace Series Aerospace Industry Quality System Part 3: Requirements for Stockists-Distributors (Edition P 1)
- PREN 9000-3-1999 Aerospace Series Aerospace Industry Quality System Part 3: Requirements Applicable to Stockists-Distributors (Edition P 1;)
German Institute for Standardization, Industrial ct series measurement
- DIN EN 61987-10 Berichtigung 1:2012 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals (IEC 61987-10:2009);
- DIN 9797:1988-10 Machinery and equipment for the food industrie; transport carts, taking up and bar systems; measurements, designation
- DIN EN 61069-4:1998 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance (IEC 61069-4:1997); German version EN 61069-4:1997
- DIN EN 61499 Bb.1:2007 Function blocks for industrial-process measurement and control systems - Supplement 1: Tutorial information - (IEC/TR 61499-3:2004)
- DIN EN 61069-3:1997 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (IEC 61069-3:1996); German version EN 61069-3:1996
IN-BIS, Industrial ct series measurement
Danish Standards Foundation, Industrial ct series measurement
- DS/EN 61987-10:2010 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals