ZH
RU
ES

How to measure the surface energy of a liquid

How to measure the surface energy of a liquid, Total:138 items.

In the international standard classification, How to measure the surface energy of a liquid involves: Furniture, Sports equipment and facilities, Products of the chemical industry, Adhesives, Rubber and plastics products, Measurement of fluid flow, Petroleum products in general, Vocabularies, Paints and varnishes, Sterilization and disinfection, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Construction materials, Protection against fire, Hydraulic fluids, Surface treatment and coating, Road vehicle systems, Rubber, Aerospace fluid systems and components, Space systems and operations, Aids for disabled or handicapped persons, Wastes, Fuels.

German Institute for Standardization, How to measure the surface energy of a liquid

DIN EN 12720:1997 Furniture - Assessment of surface resistance to cold liquids (ISO 4211:1979, modified); German version EN 12720:1997
DIN EN 1262:2004-01 Surface active agents - Determination of pH value of solutions or dispersions; German version EN 1262:2003
DIN EN 828:2013-04 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005
DIN EN 14667:2005-09 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005
DIN 55660-5:2012 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
DIN EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
DIN EN ISO 19403-2:2020-04 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017); German version EN ISO 19403-2:2020
DIN EN 933-6:2002 Test for geometrical properties of aggregates - Determination of surface characteristics - Part 6: Flow coefficient of aggregates; German version EN 933-6:2001
DIN EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
DIN 55660-4:2012 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
DIN EN ISO 19403-5:2020-04 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017); G...
DIN EN ISO 19403-5:2023-10 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO/DIS 19403-5:2023...
DIN EN ISO 19403-3:2020 Paints and varnishes - Wettability - Part 3: Determination of the surface tension of liquids using the pendant drop method (ISO 19403-3:2017)
DIN EN 623-4:2005-01 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN EN 14981:2006-12 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC; German version EN 14981:2006
DIN EN ISO 19403-4:2020 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
DIN EN ISO 19403-4:2020-04 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017); German version EN ISO 19403-4:2020
DIN CEN/TS 15862:2012-11*DIN SPEC 91233:2012-11 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions; German version CEN/TS 15862:2012
DIN 51403-2:1988 Testing of liquid fuels; determination of water separation characteristics of aviation turbine fuels using the transportable microseparometer (MSEP method)

Korean Agency for Technology and Standards (KATS), How to measure the surface energy of a liquid

KS G ISO 4211:2009 Test method of surface resistance to cold liquids for furniture
KS G ISO 4211-2:2009 Furniture-Tests for surfaces-Part 2:Assessment of resistance to wet heat
KS G ISO 4211-2:2014 Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat
KS M ISO 9101-2007(2008) Surface active agents－Determination of interfacial tension－Drop volume method
KS M ISO 20823-2004(2019) Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
KS M ISO 20823:2004 Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

International Organization for Standardization (ISO), How to measure the surface energy of a liquid

ISO 4211:1979 Furniture; Assessment of surface resistance to cold liquids
ISO 19403-5:2017 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 19403-2:2017 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/CD 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/DIS 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/CD 19403-5:2023 Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO/DIS 19403-5:2023 Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
ISO/CD 19403-3:2023 Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
ISO/DIS 19403-3:2023 Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
ISO 19403-4:2017 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
ISO/CD 19403-4:2023 Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
ISO/DIS 19403-4:2023 Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension

Danish Standards Foundation, How to measure the surface energy of a liquid

DS/ISO 4211:1981 Furniture. Assessment of surface resistance to cold liquids
DS/EN 1262:2004 Surface active agents - Determination of the pH value of solutions or dispersions
DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
DS/EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
DS/EN 14667:2005 Surface active agents – Determination of low boiling solvents in liquid formulations – Gas chromatographic method
DS/EN 14981:2007 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
DS/EN 933-5:1998 Tests for geometrical properties of aggregates - Part 5:Determination of percentage of crushed and broken surfaces in coarse aggregate particles
DS/ISO 17190-6:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation

Association Francaise de Normalisation, How to measure the surface energy of a liquid

NF D60-051-1:1997 Furniture. Assessment of surface resistance to cold liquids.
NF EN 1262:2004 Agents de surface - Détermination de la valeur du pH des solutions ou des dispersions
NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
NF EN 828:2013 Adhésifs - Mouillabilité - Détermination par mesurage de l'angle de contact et de l'énergie superficielle libre de la surface solide
NF T76-150*NF EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
NF T30-131-2*NF EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2 : determination of the surface free energy of solid surfaces by measuring the contact angle
NF EN ISO 19403-2:2020 Peintures et vernis - Mouillabilité - Partie 2 : détermination de l'énergie libre de surface des surfaces solides par la mesure de l'angle de contact
NF EN 14667:2005 Agents de surfaces - Détermination des solvants à faible point d'ébullition dans les formulations liquides - Méthode par chromatographie en phase gazeuse
NF T30-131-5*NF EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5 : determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
NF T30-131-3*NF EN ISO 19403-3:2020 Paints and varnishes - Wettability - Part 3 : determination of the surface tension of liquids using the pendant drop method
NF EN ISO 19403-3:2020 Peintures et vernis - Mouillabilité - Partie 3 : détermination de la tension superficielle des liquides par la méthode de la goutte pendante
NF EN 14981:2007 Agents de surface - Détermination de la teneur en solvants à point d'ébullition élevé dans les détergents liquides par chromatographie en phase gazeuse
NF T30-131-4*NF EN ISO 19403-4:2020 Paints and varnishes - Wettability - Part 4 : determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
NF EN ISO 19403-4:2020 Peintures et vernis - Mouillabilité - Partie 4 : détermination des fractions polaires et disperses de la tension de surface des liquides à partir de la tension interfaciable
NF T73-279*NF EN 13405:2003 Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC).
NF EN ISO 19403-5:2020 Peintures et vernis - Mouillabilité - Partie 5 : détermination des fractions polaire et dispersive de la tension superficielle des liquides à partir de l'angle de contact avec un solide n'ayant qu'une contribution de dispersion à son énergie de...
XP CEN/TS 15862:2012 Caractérisation des déchets - Essai de lixiviation de conformité - Essai de lixiviation en bâchée unique pour des monolithes avec un rapport liquide/ surface (L/A) fixe, pour des prises d'essai de dimensions minimales fixes
NF EN 623-4:2005 Céramiques techniques avancées - Céramiques monolithiques - Propriétés générales et texturales - Partie 4 : détermination de la rugosité de surface
XP X30-475*XP CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions

Lithuanian Standards Office , How to measure the surface energy of a liquid

LST EN 12720-2009 Furniture - Assessment of surface resistance to cold liquids
LST EN 1262-2004 Surface active agents - Determination of pH value of solutions or dispersions
LST EN 14667-2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
LST EN 14981-2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC

AENOR, How to measure the surface energy of a liquid

UNE-EN 12720:2009+A1:2014 Furniture - Assessment of surface resistance to cold liquids
UNE-EN 1262:2004 Surface active agents - Determination of pH value of solutions or dispersions
UNE 55703:1982 SURFACE ACTIVE AGENTS. DETERMINATION OF LOVIBOND COLOUR IN CLEAR LIQUIDS
UNE 55702:1982 SURFACE ACTIVE AGENTS. DETERMINATION OF DENSITY AT 20 oC IN LIQUID PRODUCTS FOR INDUSTRIAL USE
UNE-EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
UNE 55701:1982 SURFACE ACTIVE AGENTS. DETERMINATION OF HAZEN UNITS OF COLOUR (PLATINUM-COBALT SCALE) OF LIQUID PRODUCTS
UNE-EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
UNE-EN 14981:2007 Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
UNE 55708/1C:1989 SURFACE ACTIVE AGENTS. DETERMINATION OF INTERFACIAL TENSION BY DRAWING UP LIQUID FILMS. ILLUSTRATED DESCRIPTION OF ITS DEVELOPMENT USING THE RING MEASUREMENT METHOD.
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
UNE 55830:1984 SURFACE ACTIVE AGENTS. VOLATILE ORGANIC LIQUIDS TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF DRY RESIDUE AFTER EVAPORATION ON A WATER BATH. GENERAL METHOD

RU-GOST R, How to measure the surface energy of a liquid

GOST ISO 4211-2012 Furniture. Assessment of surface resistance to cold liquids

British Standards Institution (BSI), How to measure the surface energy of a liquid

BS EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
BS EN 1517:2000 Surfaces for sports areas - Determination of resistance to impact
BS EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
BS EN ISO 19403-2:2020 Paints and varnishes. Wettability - Determination of the surface free energy of solid surfaces by measuring the contact angle
BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
BS EN ISO 19403-5:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
BS EN ISO 19403-3:2020 Paints and varnishes. Wettability - Determination of the surface tension of liquids using the pendant drop method
BS EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
BS EN ISO 19403-4:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
BS EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
PAS 2424:2014 Quantitative surface test for the evaluation of residual antimicrobial ( bactericidal and/or yeasticidal) efficacy of liquid chemical disinfectan ts on hard non-porous surfaces. Test method
BS ISO 14952-3:2004 Space systems - Surface cleanliness of fluid systems - Analytical procedures for the determination of nonvolatile residues and particulate contamination

ES-AENOR, How to measure the surface energy of a liquid

UNE 55-840-1989

ES-UNE, How to measure the surface energy of a liquid

UNE-EN 300434-2 V1.2.1:2004 Surface active agents - Determination of pH value of solutions or dispersions
UNE-EN ISO 19403-2:2021 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
UNE-EN ISO 19403-5:2021 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
UNE-EN ISO 19403-4:2021 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
UNE-EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness (Endorsed by AENOR in December of 2004.)

European Committee for Standardization (CEN), How to measure the surface energy of a liquid

EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
EN 933-5:1998 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
EN ISO 19403-4:2020 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test ISO 20823:2003
CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
PD CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions

Standard Association of Australia （SAA）, How to measure the surface energy of a liquid

AS 2360.8.1:2007 Hydrometry - Measurement of free surface flow in closed conduits - Methods
IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
IEC 62631-3-2:2023 CMV Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

Professional Standard - Energy, How to measure the surface energy of a liquid

NB/SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

国家能源局, How to measure the surface energy of a liquid

SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

BE-NBN, How to measure the surface energy of a liquid

NBN M 02-010-1979 Determination of the gross calorific value of a solid fuel and cal-culation of its net calorific value

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure the surface energy of a liquid

GB/T 15357-1994 Surface active agents and detergents--Determination of viscosity of liquid products using a rotational viscometer
GB/T 11543-1989 Surface active agents--The identification of emulsions of moderate to high viscosity and the method of evaluation of their capability of emulsifying
GB/T 15357-2014 Surface active agents and detergents.Determination of viscosity and flow properties of liquid products using a rotational viscometer
GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
GB/T 24916-2010 Surface treatment solution.Determination of metal element contents.Inductively coupled plasma atomic emission spectrometric method

American Society for Testing and Materials (ASTM), How to measure the surface energy of a liquid

ASTM E2414-05 Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces

International Electrotechnical Commission (IEC), How to measure the surface energy of a liquid

IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity

未注明发布机构, How to measure the surface energy of a liquid

DIN EN 933-5:1998 Tests for geometrical properties of aggregates — Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
BS EN 623-4:2004(2009) Advanced technical ceramics — Monolithic ceramics — General and textural properties — Part 4 : Determination of surface roughness

CZ-CSN, How to measure the surface energy of a liquid

CSN 68 1142-1994 Testing methods for surfactans and detergents. Determination of ethanol-soluble matters in liquid detergents

Professional Standard - Machinery, How to measure the surface energy of a liquid

JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

Japanese Industrial Standards Committee (JISC), How to measure the surface energy of a liquid

JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity

KR-KS, How to measure the surface energy of a liquid

KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

DE-VDA, How to measure the surface energy of a liquid

VDA 675-240-2014

RO-ASRO, How to measure the surface energy of a liquid

STAS 12745-1989 Sollar collectors PLANE SOLAR COLLECTORS WITH GASOUS OR LIQUID THERMIC AGENT Determination of stagnation maxi- mum temperature under natural solar irradiation