ZH
RU
ES

Phantom

Phantom, Total:256 items.

In the international standard classification, Phantom involves: Ergonomics, Integrated Services Digital Network (ISDN), Reinforced plastics, Ground service and maintenance equipment, Construction technology, Education, Electrical accessories, Solar energy engineering, Construction materials, Rubber, Dentistry, Software development and system documentation, Chipless working equipment, Astronomy. Geodesy. Geography, Aids for disabled or handicapped persons, Industrial automation systems, Semiconductor devices, Housings, enclosures, other machine parts, Construction industry, Integrated circuits. Microelectronics, Telecommunication systems, Rectifiers. Convertors. Stabilized power supply, Vocabularies, Equipment for the rubber and plastics industries, Acoustics and acoustic measurements, Information technology (IT) in general, Information sciences. Publishing, Equipment for processing of minerals, Audio, video and audiovisual engineering, Materials for aerospace construction, Applications of information technology, Plastics, Medical equipment, Networking, Farming and forestry, Shipbuilding and marine structures in general, Character sets and information coding, Electricity. Magnetism. Electrical and magnetic measurements, Electrical engineering in general, Electronic components in general, Structures of buildings, Iron and steel products, Products of non-ferrous metals, Optoelectronics. Laser equipment, Cutting tools, Aerospace electric equipment and systems, Quality, Terminology (principles and coordination), Buildings, Civil engineering in general, Protection against dangerous goods, Laboratory medicine.


RU-GOST R, Phantom

  • GOST R ISO 15536-1-2010 Ergonomics. Computer manikins and body templates. Part 1. General requirements
  • GOST R ISO 15536-2-2010 Ergonomics. Computer manikins and body templates. Part 2. Verification of functions and Validation of dimensions for Computer manikin systems
  • GOST 20928-1975 Shank of the unit for changeable compression moulding press-moulds. Construction and dimensions
  • GOST R 57700.9-2018 Numerical modelling of physical processes. Numerical simulation of laminar flows of viscous liquids and gases. Software verification
  • GOST R 57700.15-2018 Numerical modelling of physical processes. Numerical simulation of laminar flows of viscous liquids and gases. Software validation
  • GOST R 57700.17-2018 Numerical modeling of physical processes. Numerical simulation of subsonic flows of viscous liquids and gases. Software validation
  • GOST R 53734.3.1-2013 Electrostatics. Methods for simulation of electrostatic effects. Human body model. Electrostatic discharge
  • GOST 40.9003-1988 Quality systems. Model for guality accurance in final inspection and test

Association Francaise de Normalisation, Phantom

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Phantom

  • GB/T 23702.1-2009 Ergonomics.Computer manikins and body templates.Part 1:General requirements
  • GB/T 23702.2-2010 Ergonomics.Computer manikins and body templates.Part 2: Verification of functions and validation of dimensions for computer manikin systems
  • GB/T 8324-1987 Test method for bulk factor of moulding materials
  • GB/T 15759-2023 Human body template design and use requirements
  • GB/T 15759-1995 Design and requirements for the templates of human body
  • GB/T 14779-1993 The design requirement for human body templet in sitting
  • GB/T 27830-2011 Chemicals.Test method of in vitro skin corrosion.Human skin model test

German Institute for Standardization, Phantom

  • DIN EN ISO 15536-1:2008-12 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005); German version EN ISO 15536-1:2008 / Note: DIN EN ISO 15536-1 (2005-08) remains valid alongside this standard until 2009-12-28.
  • DIN EN ISO 15536-2:2007-06 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007); German version EN ISO 15536-2:2007
  • DIN EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007); English version of DIN EN ISO 15536-2:2007-06
  • DIN 1451-4:1987-08 Typefaces; lineal linear-antiqua; stenciled lettering for engraving and other processes
  • DIN 33408-1:1987 Body templates for seats of all kinds
  • DIN 33408-1:2008 Body templates - Part 1: For seats of all kinds
  • DIN EN ISO 21563:2022-02 Dentistry - Hydrocolloid impression materials (ISO 21563:2021); German version EN ISO 21563:2021
  • DIN EN 62258-5:2007 Semiconductor die products - Part 5: Requirements for information concerning electrical simulation (IEC 62258-5:2006); German version EN 62258-5:2006

International Organization for Standardization (ISO), Phantom

  • ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems
  • ISO 19440:2020 Enterprise modelling and architecture — Constructs for enterprise modelling
  • ISO 4823:2015 Dentistry - Elastomeric impression materials
  • ISO 21563:2013 Dentistry.Hydrocolloid impression materials
  • ISO 4823:2000 Dentistry - Elastomeric impression materials
  • ISO 21563:2021 Dentistry - Hydrocolloid impression materials
  • ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
  • ISO/IEC 15938-5:2003/Amd 1:2004 Information technology - Multimedia content description interface - Part 5: Multimedia description schemes; Amendment 1: Multimedia description schemes extensions

European Committee for Standardization (CEN), Phantom

  • EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems
  • EN ISO 21563:2013 Dentistry - Hydrocolloid impression materials [Superseded: CEN EN 21563, CEN EN ISO 1564, CEN EN ISO 13716]
  • EN ISO 21563:2021 Dentistry - Hydrocolloid impression materials (ISO 21563:2021)

British Standards Institution (BSI), Phantom

  • BS IEC 63240-2:2020 Active assisted living (AAL) reference architecture and architecture model. Architecture model
  • BS EN 62258-6:2006 Semiconductor die products - Requirements for information concerning thermal simulation
  • BS EN ISO 21563:2013 Dentistry. Hydrocolloid impression materials
  • BS EN 62258-5:2006 Semiconductor die products - Requirements for information concerning electrical simulation
  • BS EN ISO 15536-1:2009 Ergonomics - Computer manikins and body templates - General requirements
  • BS EN 62608-1:2014 Multimedia home network configuration. Basic Reference model. System model
  • BS IEC 62608-2:2017 Multimedia home network configuration. Basic reference model - Operational model
  • BS EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - General requirements
  • BS EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Verification of functions and validation of dimensions for computer manikin systems
  • CWA 13699-1999 Model for metadata for multimedia information
  • BS CWA 13699:1999 Model for metadata for multimedia information
  • BS CWA 16799:2014 Validation of computational solid mechanics models
  • BS ISO/IEC 19763-3:2010 Information technology. Metamodel framework for interoperability (MFI). Metamodel for ontology registration
  • PD ES 59008-5-1-2001 Data requirements for semiconductor die. Particular requirements and recommendations for die types. Bare die
  • BS EN 1371-2:1998 Founding - Liquid penetrant inspection - Investment castings
  • BS EN 62258-1:2006 Semiconductor die products - Requirements for procurement and use
  • BS EN 62258-1:2010 Semiconductor die products. Procurement and use
  • BS ISO/IEC 19763-3:2007 Information technology - Metamodel framework for interoperability (MFI) - Metamodel for ontology registration

American National Standards Institute （ANSI), Phantom

  • ANSI T1.620a-1992 Multi-Rate Circuit-Mode Bearer Service for ISDN - Addendum to the Circuit-Mode Bearer Service Category Description
  • ANSI/IEEE 1516.2:2010 Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) - Object Model Template (OMT) Specification
  • ANSI/ASA S3.36-2012 Specification for a Manikin for Simulated in-situ Airborne Acoustic Measurements
  • ANSI/INCITS/ISO/IEC 15938-5/AMD 1:2009 Information technology - Multimedia content description interface - Part 5: Multimedia description schemes AMENDMENT 1: Multimedia description schemes extensions

Professional Standard - Aviation, Phantom

  • HB/Z 150-1989 Die body combined die assembling
  • HB 4117-1988 Overall long and round female die
  • HB 4388-1989 Technical conditions for die body combined punch die elements and components
  • HB 7024.8-1994 Fixture universal element base piece rectangular drill template body
  • HB 7024.9-1994 Fixture universal element base piece square drill template body
  • HB 2910-1976 Integral die for hex head bolts (nails)

PT-IPQ, Phantom

(U.S.) Ford Automotive Standards, Phantom

Group Standards of the People's Republic of China, Phantom

Professional Standard - Education, Phantom

Professional Standard - Electron, Phantom

  • SJ 3029.4-1988 Combined dies--Hammer body
  • SJ 2649.3-1985 Cold press dies--Polyurethane spring-pad
  • SJ 20642-1997 Semiconductor opto-electronic module General specification for
  • SJ 20642.3-1998 Semiconductor opto-electronic module Detail specification for type GD83 PIN-FET opto-receiver module
  • SJ 20642.2-1998 Semiconductor opto-electronic module Detail specification for type GD82 PIN-FET opto-receiver module
  • SJ/T 11516-2015 Specification for thin film transistor(TFT) mask
  • SJ 1878-1981 Methods of discrimination for transverse mode of gas laser devices
  • SJ 20642.1-1998 Semiconductor opto-electronic module Detail specification for type GD81 PIN-FET opto-receiver module

教育部, Phantom

ESD - ESD ASSOCIATION, Phantom

Professional Standard - Agriculture, Phantom

  • 空气和废气监测分析方法 7.1.1-2003 Part 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter 1 Basic Theory of Chemical Mass Balance (CMB) Receptor Model - Principle of CMB Receptor Model

RO-ASRO, Phantom

Military Standards (MIL-STD), Phantom

Professional Standard - Chemical Industry, Phantom

Japanese Industrial Standards Committee (JISC), Phantom

Electrostatic Discharge Association (ESDA), Phantom

Sichuan Provincial Standard of the People's Republic of China, Phantom

国家市场监督管理总局、中国国家标准化管理委员会, Phantom

KR-KS, Phantom

Institute of Electrical and Electronics Engineers (IEEE), Phantom

  • IEEE 1516.2-2010 Modeling and Simulation (M&S) High Level Architecture (HLA) — Object Model Template (OMT) Specification (IEEE Computer Society)
  • IEEE 1516.1-2010 Modeling and Simulation (M&S) High Level Architecture (HLA) - Federate interface specification

Professional Standard - Machinery, Phantom

Professional Standard - Military and Civilian Products, Phantom

  • WJ/Z 362-1995 Reverse Extrusion Die of Cold Extrusion Die for Small Caliber Projectile Body
  • WJ/Z 365-1995 Upper Punch Die of Cold Extrusion Die for Small Caliber Projectile Body
  • WJ/Z 366-1995 Upper Die Holder of Cold Extrusion Die for Small Caliber Shell Body
  • WJ/Z 372-1995 Lower Die Holder of Cold Extrusion Die for Small Caliber Shell Body
  • WJ/Z 376-1995 Composite Die for Cold Extrusion Die of Small Caliber Projectile Body
  • WJ/Z 363-1995 Cold Extrusion Die Combination Die for Small Caliber Projectile Projectile
  • WJ/Z 364-1995 Cold Extrusion Die Backing Plate for Small Caliber Projectile Body
  • WJ/Z 367-1995 Cold Extrusion Die Punch Backing Plate for Small Caliber Projectile Body
  • WJ/Z 370-1995 Cold Extrusion Die Die Pressing Plate for Small Caliber Projectile Body
  • WJ/Z 371-1995 Cold Extrusion Die Die Sleeve for Small Caliber Projectile Body
  • WJ/Z 373-1995 Cold Extrusion Die Die Liner for Small Caliber Projectile Projectile

Hubei Provincial Standard of the People's Republic of China, Phantom

  • DB42/T 1506-2019 Technical specifications for parametric modeling of 3D solid models

Danish Standards Foundation, Phantom

Korean Agency for Technology and Standards (KATS), Phantom

  • KS X IEC 63240-2:2022 Active assisted living(AAL) reference architecture and architecture model — Part 2: Architecture model
  • KS P ISO 4823:2013 Dentistry－Elastomeric impression materials
  • KS B 3620-2012 Polycrystalline diamond dies for wire drawing
  • KS C 8527-2005 Solar simulators used in measuringcrystalline solar cells and modules
  • KS F 2801-2011 Mold for forming concrete test cylinders vertically
  • KS F 2801-1986 Mold for forming concrete test cylinders vertically
  • KS C 8527-1995 Solar simulators used in measuring crystalline solar cells and modules

International Electrotechnical Commission (IEC), Phantom

  • IEC 63240-2:2020 Active assisted living (AAL) reference architecture and architecture model - Part 2: Architecture model
  • IEC 62258-6:2006 Semiconductor die products - Part 6: Requirements for information concerning thermal simulation

Taiwan Provincial Standard of the People's Republic of China, Phantom

GM North America, Phantom

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Phantom

International Federation of Trucks and Engines, Phantom

ES-UNE, Phantom

  • UNE-EN ISO 21563:2021 Dentistry - Hydrocolloid impression materials (ISO 21563:2021) (Endorsed by Asociación Española de Normalización in November of 2021.)
  • UNE-EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing

PH-BPS, Phantom

European Committee for Electrotechnical Standardization（CENELEC）, Phantom

  • EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing

Indonesia Standards, Phantom

HU-MSZT, Phantom

BE-NBN, Phantom

SG-SPRING SG, Phantom

  • CP 36-1987 CODE OF PRACTICE FOR Modular Coordination For The Building Industry

TR-TSE, Phantom

  • TS 3058-1978 STEEL DISCS, OPEN DIE FORCED (SOLID) DIMENSIONS
  • TS 189-1965 DETERMINAT?ON OF BULK FACTOR OF MOULDING MATERIAUS

Professional Standard - Medicine, Phantom

International Telecommunication Union (ITU), Phantom

Professional Standard-Ships, Phantom

JP-JEC, Phantom

Professional Standard - Aerospace, Phantom

  • QJ 775.7-1983 Positioning ruler for small combination punching die

国家药品监督管理局, Phantom

FI-SFS, Phantom

Lithuanian Standards Office , Phantom

  • LST EN ISO 15536-1:2009 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)
  • LST EN ISO 21563:2013 Dentistry - Hydrocolloid impression materials (ISO 21563:2013)
  • LST EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007)

AENOR, Phantom

  • UNE-EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)
  • UNE 146301:2002 Aggregates. Fineness modulus of the fine aggregate.
  • UNE-EN ISO 21563:2014 Dentistry - Hydrocolloid impression materials (ISO 21563:2013)
  • UNE-EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007)

Professional Standard - Commodity Inspection, Phantom

  • SN/T 2245-2009 Chemicals.In vitro skin corrosion.Human skin model test

United States Navy, Phantom

Military Standard of the People's Republic of China-General Armament Department, Phantom

  • GJB 8120-2013 General specification for semiconductor optoelectronic module
  • GJB 8126-2013 Measuring methods for plasma display modules
  • GJB 9225-2017 General requirements for force entity description model

International Truck and Engine Corporation (ITEC), Phantom

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Phantom

  • ASHRAE 4411-2001 Modeling and Analysis of Gas Coolers
  • ASHRAE LO-09-037-2009 Modeling of the Human Body to Study the Personal Micro Environment
  • ASHRAE KC-03-10-5-2003 Infiltration and Natural Ventilation Model for Whole Building Energy Simulation of Residential Buildings
  • ASHRAE 4636-2003 A Network Model to Simulate Paerformance of Variable Refrigerant Volume Refrigeration Systems
  • ASHRAE DA-07-064-2007 Predicting Individual Differences in Human Thermal Strain Using Computational Models
  • ASHRAE 4202-1998 Numerical Simulation of Contaminant Distribution Around a Modeled Human Body: CFD Study on Computational Thermal Manikin - Part II

Shandong Provincial Standard of the People's Republic of China, Phantom

National Metrological Technical Specifications of the People's Republic of China, Phantom

  • JJF 1556-2016 Calibration specification for ultrasonic tissue imitation phantom
  • JJF 1268-2010 Calibration Specification for Medical Diagnostical X-ray Radiation Source for Computer Tomography(CT) Phantom
  • JJF 1927-2021 Calibration Specification for Phantoms Used in Computed Radiography (CR) and Digital Radiography (DR)

Hebei Provincial Standard of the People's Republic of China, Phantom

工业和信息化部, Phantom

机械工业部, Phantom

GOSTR, Phantom

  • GOST R 57700.8-2018 Numerical modeling of physical processes. Numerical simulation of subsonic flows of viscous liquids and gases. Software verification

ES-AENOR, Phantom

Professional Standard - Traffic, Phantom

  • JT/T 144-1994 Testing model of mortar strength for concrete vessel

CH-SNV, Phantom

Government Electronic & Information Technology Association, Phantom

IN-BIS, Phantom

Canadian Standards Association (CSA), Phantom

  • CSA Z250-2021 Process for delivery of volumetric modular buildings

Professional Standard - Railway, Phantom

SAE - SAE International, Phantom

国家药监局, Phantom

  • YY/T 0937-2022 Technical requirements for ultrasonic tissue-mimicking phantoms

Heilongjiang Provincial Standard of the People's Republic of China, Phantom

  • DB2306/T 155-2021 Technical regulations for body condition management of lactating dairy cows in large-scale pastures

  motif, tissue phantom ratio, wild motif, Phantom.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved