ZH
RU
ES

Diameter measuring system

Diameter measuring system, Total:499 items.

In the international standard classification, Diameter measuring system involves: Textile fibres, Hinges, eyelets and other articulated joints, Gears, Cutting tools, Semiconducting materials, Special measuring equipment for use in telecommunications, Screw threads, Fluid power systems, Fibre optic communications, Materials for the reinforcement of composites, Components and accessories for telecommunications equipment, Testing of metals, Power transmission and distribution networks, Transformers. Reactors, Medical equipment, Road vehicles in general, Linear and angular measurements, Aids for disabled or handicapped persons, Optical equipment, Tobacco, tobacco products and related equipment, Electrical wires and cables, Wood, sawlogs and sawn timber, Analytical chemistry, Lubrication systems, Optoelectronics. Laser equipment, Rotary-reciprocating mechanisms and their parts, Internal combustion engines, Internal combustion engines for road vehicles, Electrical and electronic testing, Vibrations, shock and vibration measurements, Shafts and couplings, Education, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of volume, mass, density, viscosity, Radiocommunications, Industrial automation systems, Water quality, Electrical engineering in general, Aerospace fluid systems and components, Switchgear and controlgear, Semiconductor devices, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Occupational safety. Industrial hygiene, Measurement of fluid flow, Insulation, Acoustics and acoustic measurements, Components for aerospace construction, Fasteners for aerospace construction, Radiation measurements, Aircraft and space vehicles in general, Power stations in general, Natural gas, Astronomy. Geodesy. Geography, Air quality, Road vehicle systems, Bearings, Solar energy engineering, Sports equipment and facilities, Quality, Optics and optical measurements, Transport, Energy and heat transfer engineering in general, Construction materials, Mechanical testing, Heat recovery. Thermal insulation.

CZ-CSN, Diameter measuring system

CSN 34 7010 Cast.06-1976 Overall diameter and inereas in diameter measurements of winding wires.
CSN 20 0300 Cast.29-1987 Measurements of geometrical accuracy ofmachine toolsMeasurements of diameters constancy
CSN 35 8568-1966 Methods of measurement of spot diameter of television plcture tubes
CSN IEC 946:1992 Binary direct voltage signals for process measurement and control systems
CSN 48 0009-1975 Volume tables of round timber without bark according to mean diameter measured in bark
CSN 25 4227-1962 Measuring parts of reference gauges for ing thread "not go" gauges. Trapezoidal hread. Diameter 10—100 mm
CSN 10 9421-1984 United system of industrial pneumatic components Reducing valves. Nominal inside diameters and connection threads
CSN 25 4184-1963 Measuring parts of reference gauges on wearing for ring thread "GO" gauges. Diameter G 1/8" - G 3 1/2"
CSN 25 4224-1962 Measuring parts of reference gauges on earing for ring thread "go" gauges. ormal trapezoidal thread. Diameter 0-100 mm
CSN 25 4154-1964 Measuring parts of reference gauges on wearing for ring thread "GO" gauges. Whitworth thread. Diameter W 1/8" - W 3"
CSN 25 4222-1962 Measuring parts of reference gauges for ew ring thread "go" gauges. Normal rapezoidal thread. Diameter 10—100 mm
CSN 25 4157-1964 Measuring parts of reference gauges for ring thread "NOT GO" gauges. Whitworth thread. Diameter W 1/8" - W 3"
CSN 25 4212-1962 Measuring parts for "go" limit of cylind- ical thread gauges. Normal trapezoidal hread. Diameter 10—100 mm
CSN 25 4182-1963 Measuring parts of reference gauges for new ring thread "GO" gauges. Cylindrical pipe thread. Diameter G 1/8" - G 3 1/2"
CSN 11 9110-1979 Unified system of industrial hydraulic components. Mounting plates with 6 and 10 mm nominal inner diameter. Connecting dimensions of interface area
CSN 25 4187-1963 Measuring parts of reference gauges for ring thread "NOT GO" gauges. Cylindrical pipe thread. Diameter G 1/8 - G 3 1/2"
CSN 25 4142-1964 Measuring parts of "GO" limit of cylindrical thread gauges. Whitworth thread. Diameter W 1/8" - W 3"
CSN 25 4152-1964 Measuring parts of reference gauges for new ring thread "GO" gauges. Whitworth thread. Diameter W 1/8" - W 3"
CSN 31 1700-1985 Power supply systems of airplanes and heli- copters Demands on power supply quality
CSN 25 4214-1962 Measuring parts for ,,not go" limits of ylindrical thread gauges. Normal trape- oidal thread. Diameter 10—100 mm

Standard Association of Australia （SAA）, Diameter measuring system

AS/NZS 4492.4:2000 Wool-Fleece testing and measurement - Measurement of mean fibre diameter and determination of fibre diameter distribution using the SIROLAN-LASERSCAN measuring system
AS/NZS 4492.5:2000 Wool-Fleece testing and measurement - Measurement of mean fibre diameter using the OFDA measuring system
AS 2360.1.2:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates or nozzles - Conduits with diameters less than 50 mm
AS 2360.1.1:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi tubes - Conduits with diameters from 50 mm to 1200 mm
AS 1001:1970 Plain setting rings for internal measuring equipment (metric series)
AS 1931.2:1996/Amdt 1:1997

Taiwan Provincial Standard of the People's Republic of China, Diameter measuring system

CNS 5480-1980 Suitable Gauging System for Diameter and Length of Conicial Joints
CNS 12370-1988 Method of Test for Fiber Optic Devices ( FOTP-48 On-Line Diameter Measurement)
CNS 12714-1990 Binary Direct Voltage Signals for Process Measurement and Control Systems
CNS 12373-1988 Method of Test for Fiber Optic Devices ( FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers )
CNS 13827-2007 Measurement management systems - Requirements for measurement processes and measuring equipment

German Institute for Standardization, Diameter measuring system

DIN 3977:1981 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
DIN 3977:1981-02 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
DIN ISO 3320:2001 Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)
DIN 75501:1987-10 Instrument panel-measuring instruments for motor vehicles; built-in diameters
DIN 58187:1986 Quality evaluation of optical systems; determination of radial distortion
DIN 75501:1987 Instrument panel-measuring instruments for motor vehicles; built-in diameters
DIN ISO 3320:2016 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series (ISO 3320:2013)
DIN 58141-4:2014-08 Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers; Text in German and English
DIN 65571-4:1992-11 Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry
DIN 50441-4:1999 Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 4: Slice diameter, diamter variation, flat diameter, flat length, flat depth
DIN 2241:2018 Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN EN 60793-1-45:2004 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter (IEC 60793-1-45:2001 + Corrigendum 2002, modified); German version EN 60793-1-45:2003
DIN 2241:2006 Geometrical product specifications (GPS) - Screw setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN 65571-4:1992 Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry
DIN ISO 10817-1:1999-11 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
DIN 2284-2:2001-12 Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
DIN 2276-2:1986-06 Inclination measuring systems; electronic inclination measuring systems; types and requirements
DIN 58141-4:2014 Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers; Text in German and English
DIN ISO 2971:2015-12 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus (ISO 2971:2013)
DIN 70028:2004 Passenger cars - Measuring the stopping distance with ABS in straight-ahead stops
DIN 2250-1:1989 General-purpose GO ring gauges and setting ring gauges for pneumatic length measuring instruments from 1 mm up to 315 mm nominal diameter
DIN ISO 10817-1:1999 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
DIN EN ISO 4375:2015-03 Hydrometry - Cableway systems for stream gauging (ISO 4375:2014); German version EN ISO 4375:2014
DIN EN 61685:2003-02 Ultrasonics - Flow measurement systems - Flow test object (IEC 61685:2001); German Version EN 61685:2001
DIN 65571-3:1992-11 Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section
DIN 2240-2:2001-12 Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps
DIN 2248-1:2000-01 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
DIN 2276-2:1986 Inclination measuring systems; electronic inclination measuring systems; types and requirements
DIN EN ISO 10012:2004 Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003); Trilingual version EN ISO 10012:2003
DIN 2249-1:2000-01 Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter

SE-SIS, Diameter measuring system

SIS SMS 324-1975 Pipeline systems. Nominal diameter, DN
SIS SS-ISO 4397:1985 Fluid power systems and components — Connectors and associated components — Outside diameters of tubes and inside diameters of hoses
SIS 71 11 03
SIS SS-ISO 3320:1990 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
SIS SS-IEC 946:1990 Process control — Binary direct voltage signals for process measurement and control systems
SIS SS 02 01 70-1985 Measurement and calibration systems — Specification of system requirements

Society of Automotive Engineers (SAE), Diameter measuring system

SAE J2122-1998 Numbering System for Single Diameter Drills
SAE J2276-1998 Numbering System for Multiple Diameter Cutting Tools
SAE J2124-1998 Numbering System for Single Diameter and Taper Reamers
SAE AS3096-2012 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 2.5 DIA NOM LENGTH
SAE AS3094-2012 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH
SAE AS3094A-2021 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH
SAE AS3096-1974 Insert - CRES Helical Coil Fine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length FSC 5340
SAE AS3094-1974 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH FSC 5340
SAE AESQRM003-202210 RM13003 - Measurement Systems Analysis
SAE AESQRM003-202105 RM13003 - Measurement Systems Analysis
SAE J973-1999 Ignition System Measurements Procedure
SAE J973-2013 Ignition System Measurements Procedure
SAE J973A-1973 Ignition System Measurements Procedure

SAE - SAE International, Diameter measuring system

SAE J2122-2019 Numbering System for Single Diameter Drills
SAE J2122-1990 NUMBERING SYSTEM FOR STANDARD DRILLS
SAE J2122-1994 Numbering System for Single Diameter Drills
SAE J2276-1995 Numbering System for Multiple Diameter Cutting Tools@ Recommended Practice
SAE J2276-2019 Numbering System for Multiple Diameter Cutting Tools
SAE J2124-1990 NUMBERING SYSTEM FOR REAMERS
SAE J2124-2019 Numbering System for Single Diameter and Taper Reamers
SAE J2124-1994 Numbering System for Single Diameter and Taper Reamers
SAE AS3094A-2016 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH
SAE AS3095-1974 Insert - CRES Helical Coil Fine Thread@ Locking (Low Friction Systems) 2 Dia Nom Length
SAE AS3097-1974 INSERT - CRES HELICAL COIL FINE THREAD@ LOCKING (LOW FRICTION SYSTEMS) 3 DIA NOM LENGTH
SAE AS3096A-2018 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 2.5 DIA NOM LENGTH
SAE J973-2020 Ignition System Measurements Procedure
SAE J973-1995 Ignition System Measurements Procedure@ Recommended Practice
SAE J973-1993 Ignition System Measurements Procedure

PT-IPQ, Diameter measuring system

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Diameter measuring system

GB/T 14140-2009 Test method for measuring diameter of semiconductor wafer
GB/T 26826-2011(英文版) Measurement for diameter of carbon nanotubes
GB/T 20670-2006 Unified screw threads-General plan
GB/T 26826-2011 Measurement for diameter of carbon nanotubes
GB/T 14140.2-1993 Silicon slices and wafers--Measuring of diameter--Micrometer method
GB/T 26217-2010 DC voltage measuring device for HVDC transmission system
GB/T 14140.1-1993 Silicon slices and wafers--Measuring of diameter--Optical projecting method
GB/T 12540-2009 Minimum turning circle diameter,minimum turning clearance circle diameter and out value test method for motor vehicles
GB/T 12540-2009 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
GB/T 26216.1-2010 DC current measuring device for HVDC transmission system.Part 1:Electronic DC current measuring device
GB/T 26216.2-2010 DC current measuring device for HVDC transmission system.Part 2:Electromagnetic DC current measuring device
GB/T 3493-1983 Standard method for measuring diameter of fine wire of the precious metals and their alloys(weighing method)
GB/T 21487.1-2008 Rotating shaft vibration measuring systems.Part 1:Relative and absolute sensing of radial vibration
GB/T 19899-2005 Binary direct voltage signals for process measurement and control systems
GB/T 42638-2023 Drainage volume method for direct measurement of coal seam gas drainage radius
GB/T 28587-2012 Inertial measurement unit in the mobile mapping system
GB/Z 26208-2010 Testing of supplementary systems of photometry

AT-ON, Diameter measuring system

ONORM M 6780-1996 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
ONORM M 7331-1980 Nominal sizes (diameters) of piping Systems
ONORM ISO 3320:1988 Fluid power Systems and components; cy linder bor es and piston rod diameters; metric series

American National Standards Institute （ANSI), Diameter measuring system

ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield
ANSI/TIA/EIA 455-48B-1990 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA-455-191-B-2003 Measurement of Mode Field Diameter of Single-Mode Optical Fiber
ANSI/SCTE 312007-2008 Test Method for Measuring Diameter Over Core
ANSI/TIA/EIA 455-58B-2001 Core Diameter Measurement of Graded-Index Optical Fibers
ANSI/AGMA 2015-2-2006 Accuracy Classification System for Cylindrical Gears - Radial Measurements
ANSI/EIA/TIA 455-48B:1990 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA-455-48B-1990 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments

VN-TCVN, Diameter measuring system

TCVN 4022-1985 Marine propeller shafts systems.Diameters
TCVN 2017-1977 Hydraulic,pneumatic and lubricating systems.Moninal diameters
TCVN 2145-1977 Hydrostatic and pneumatic drives and lubricating systems.Standards diameters
TCVN 5077-2008 Cigarettes and filter rods.Determination of nominal diameter.Method using a laser beam measuring apparatus

HU-MSZT, Diameter measuring system

BE-NBN, Diameter measuring system

NBN I-889-1968
NBN-ISO 2971:1992 Cigarettes and filters - Determination of nominal diameter - Pneumatic method
NBN 98-1957

Professional Standard - Petroleum, Diameter measuring system

SY/T 5429-2000 Small diameter flowrate and watercut logging tool

能源部, Diameter measuring system

SY/T 5429-1991 Small diameter flow water content tester
SY/T 5567-1993 Maintenance specifications for small diameter flow water content tester

国家市场监督管理总局、中国国家标准化管理委员会, Diameter measuring system

GB/T 2348-2018 Fluid power systems and components—Cylinder bores and piston rod diameters
GB/T 26217-2019 DC voltage measuring device for HVDC transmission system
GB/T 26216.2-2019 DC current measuring device for HVDC transmission system—Part 2：Electromagnetic DC current measuring device
GB/T 26216.1-2019 DC current measuring device for HVDC transmission system—Part 1：Electronic DC current measuring device

GM North America, Diameter measuring system

GM GM9001P-1988 Method for Gaging Seal Lip Diameter

GM Daewoo, Diameter measuring system

GMKOREA EDS-T-4604-2011 Method for Gaging Seal Lip Diameter

Korean Agency for Technology and Standards (KATS), Diameter measuring system

KS B 6340-1980 Vane pumps for oil hydraulic use
KS B 6341-1986 Gear Pumps for Hydraulic Use
KS B ISO 3320:2006 Fluid power systems and components-Cylinder bores and piston rod diameters-Metric series
KS B ISO 3320:2013 Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
KS P ISO 15142-3:2021 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
KS P ISO 15142-3-2010(2016) Implants for surgery－Metal intramedullary nailing systems－Part 3：Connection devices and reamer diameter measurements
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS B ISO 3320-2006(2011) Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS C IEC 60793-1-45-2003(2018)
KS C IEC 60946:2005 Binary direct voltage signals for process measurement and control systems
KS C IEC 60946:2013 Binary direct voltage signals for process measurement and control systems
KS H ISO 2971:2008 Cigarettes and filter rods-Determination of nominal diameter-Method using a laser beam measuring apparatus
KS H ISO 2971:2013 Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS H ISO 2971-2013(2018) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS C IEC 60946-2005(2010) Binary direct voltage signals for process measurement and control systems
KS B ISO 10817-1_2001:2021 Rotating shaft vibration measuring systems —Part 1: Relative and absolute sensing of radial vibration
KS Q 4003-2005(2010) Measurement－General rules for calibration system

BR-ABNT, Diameter measuring system

TIA - Telecommunications Industry Association, Diameter measuring system

TIA/EIA-455-191-1998 FOTP-191 Measurement of Mode Field Diameter of Single-Mode Optical Fiber
455-164-1986 Scanning Far-Field@ Fiber Single-Mode@ Measurement of Mode Field Diameter
EIA/TIA-455-58A-1990 FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers
EIA/TIA-455-164A-1991 FOTP-164 Single-Mode Fiber@ Measurement of Mode Field Diameter by Far-Field Scanning
EIA/TIA-455-165A-1993 FOTP-165 Mode-Field Diameter Measurement by Near-Field Scanning Technique
EIA/TIA-455-48B-1990 FOTP-48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
455-27A-1986 Fibers@ Measuring Outside (Uncoated) Diameter of Optical Waveguide (*NOT CURRENT DOCUMENT)
TIA/EIA-455-191A-2001 FOTP-191 Measurement of Mode Field Diameter of Single-Mode Optical Fiber (Revision of TIA/EIA-455-191)
455-166-1986 Single-Mode Fiber@ Measurement of Mode Field Diameter by Transverse Offset (*NOT CURRENT DOCUMENT)
TIA/EIA-455-92-1992 FOTP-92 Optical Fiber Cladding Diameter and Noncircularity Measurement by Fizeau Interferometry (Withdrawn May 2003)
TIA-526-18-2007 Systematic Jitter Generation Measurement

International Organization for Standardization (ISO), Diameter measuring system

ISO 3321:1975 Fluid power systems and components; Cylinder bores and piston rod diameters; Inch series
ISO 3320:1987 Fluid power systems and components; Cylinder bores and piston rod diameters; Metric series
ISO/CD 15142-3 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
ISO 3320:1975 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
ISO 2971:1998 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO 10817-1:1998 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration
ISO/ASTM 51631:2020 Practice for use of calorimetric dosimetry systems for dose measurements and dosimetry system calibration in electron beams
ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
ISO/CD 24102-6 Intelligent transport systems — ITS station management — Part 6: Path and flow management
ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment

Association Francaise de Normalisation, Diameter measuring system

NF C93-840-1-45*NF EN IEC 60793-1-45:2018 Optical fibres - Part 1-45 : measurement methods - Mode field diameter measurement
NF EN IEC 60793-1-45:2018 Fibres optiques - Partie 1-45 : méthodes de mesure - Mesure du diamètre du champ de mode
NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
NF EN 3245:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords droits pour réduction
NF E11-022:1975 Plain plug gauges (horology series) - Diameters from 0,1 mm to 3 mm- Gauging members and handles.
NF E11-021:1975 Plain plug gauges (horology series) - Diameters from 0,1 mm to 3 mm- Locked gauges.
NF V37-012*NF ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
NF C93-840-1-45:2004 Optical fibres - Part 1-45 : measurement methods and test procedures - Mode field diameter.
NF EN 4193:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords en té pour traversée de cloison, réduits, en ligne, type long
NF C53-975/A1*NF EN 61975/A1:2017 High-voltage direct current (HVDC) installations - System tests
NF EN IEC 61975/A2:2022 Installations en courant continu à haute tension (CCHT) - Essais systèmes
NF EN 61975/A1:2017 Installations en courant continu à haute tension (CCHT) - Essais systèmes
NF EN 61975:2013 Installations en courant continu à haute tension (CCHT) - Essais système
NF EN 4190:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords en té, avec écrou à jonc en ligne, réduits
NF EN IEC 63027:2023 Systèmes photovoltaïques - Détection et interruption d'arc en courant continu
NF ISO 2971:2013 Cigarettes et bâtonnets-filtres - Détermination du diamètre nominal - Méthode utilisant un instrument de mesure optique sans contact
NF ISO 24155:2016 Hydrométrie - Systèmes de transmission des données hydrométriques -Spécification des exigences des systèmes
NF EN 60947-6-1:2006 Ultrasons - Systèmes de mesure de débit - Montage pour essai de débit
NF EN 61685:2006 Ultrasons - Systèmes de mesure de débit - Montage pour essai de débit
NF ISO 6420:2017 Hydrométrie - Système de positionnement pour embarcations hydrométriques
NF X07-009*NF EN ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment
NF C42-198-8:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8 : insulation monitoring devices for IT systems.
NF C42-198-8*NF EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8 : insulation monitoring devices for IT systems

Professional Standard - Military and Civilian Products, Diameter measuring system

WJ 1929-1990 Piping system ferrule-type equal-diameter straight-through pipe joint
WJ 1930-1990 Pipeline system ferrule type equal diameter straight-through joint body
WJ 1931-1990 Piping system ferrule type reducing straight pipe joint
WJ 1932-1990 Piping system ferrule-type reducing straight-through joint body
WJ 1933-1990 Piping system ferrule type equal diameter right angle pipe joint
WJ 1934-1990 Pipeline system ferrule type equal diameter right angle joint body
WJ 1944-1990 Pipeline system welded equal diameter straight-through pipe joint
WJ 1945-1990 Pipeline system welded equal diameter straight-through joint body
WJ 1946-1990 Pipeline system welded reducing straight pipe joint
WJ 1947-1990 Pipeline system welded reducer straight-through joint body

Danish Standards Foundation, Diameter measuring system

DS/ISO 3320:1989 Fluid power systems and components. Cylinder bores and piston rod diameters. Metric series
DS/EN 60793-1-45/Corr.:2004 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
DS/EN 60793-1-45:2004 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
DS/EN 61975:2010 High-voltage direct current (HVDC) installations - System tests
DS/ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
DS/EN ISO 4375:2004 Hydrometric determinations - Cableway systems for stream gauging
DS/EN 61685:2002 Ultrasonics - Flow measurement systems - Flow test object

KR-KS, Diameter measuring system

KS P ISO 15142-3-2021 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS H ISO 2971-2013(2023) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS B ISO 10817-1_2001-2016 Rotating shaft vibration measuring systems－Part 1：Relative and absolute sensing of radial vibration
KS B ISO 10817-1_2001-2021 Rotating shaft vibration measuring systems —Part 1: Relative and absolute sensing of radial vibration

British Standards Institution (BSI), Diameter measuring system

BS ISO 15142-3:2003 Implants for surgery - Metal intramedullary nailing systems - Connection devices and reamer diameter measurements
BS EN 60793-1-45:2004 Optical fibres - Measurement methods and test procedures - Mode field diameter
BS EN 60793-1-45:2003 Optical fibres - Part 1-45:Measurement methods and test procedures - Mode field diameter
BS EN IEC 60793-1-45:2018 Tracked Changes. Optical fibres. Measurement methods and test procedures. Mode field diameter
BS ISO 10817-1:1999 Rotating shaft vibration measuring systems - Relative and absolute sensing of radial vibration
BS EN 60835-3-13:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. VSAT systems
BS EN 61975:2010 High-voltage direct current (HVDC) installations. System tests
BS EN 61975:2010+A2:2022 High-voltage direct current (HVDC) installations. System tests
22/30456060 DC BS EN 60793-1-45 Ed.3.0. Optical fibres - Part 1-45. Measurement methods and test procedures. Mode field diameter
BS ISO 24155:2016 Hydrometry. Hydrometric data transmission systems. Specification of system requirements
BS ISO 2971:2013 Cigarettes and filter rods. Determination of nominal diameter. Method using a non-contact optical measuring apparatus
BS ISO 16031-1:2008 Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Close tolerances for hydraulic systems
BS 4480-9:1995 Plain bearings: metric series - Checking the outside diameter of wrapped bushes
BS 919-4:2007 Screw gauge limits and tolerances - Limits of size for gauges for screw threads of unified form diameters 1/4 in and larger
21/30432546 DC BS EN 61975 AMD2. High-voltage direct current (HVDC) installations. System tests
BS EN IEC 63027:2023 Photovoltaic power systems. DC arc detection and interruption
BS EN 61685:2002 Ultrasonics. Flow measurement systems. Flow test object
BS EN 50123-7-2:1999 Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and current measuring devices
BS EN ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment

National Metrological Technical Specifications of the People's Republic of China, Diameter measuring system

JJF(机械) 1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF(机械)1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF(机械) 1040-2020 Calibration specification for DC high voltage measurement system
JJF(机械)1040-2020 Calibration specification for DC high voltage measurement system
JJF 1684-2017 Calibration Specification for Comparators for Measuring the Diameter,Angle and Straightness of Bearings'Tapered Roller
JJF 1545-2015 Calibration specification for tapered roller bearing raceway diameter and angle measuring instrument
JJF(机械) 1063-2021 Calibration specifications for AC, DC, lightning impulse, and universal voltage divider measurement systems
JJF(机械)1063-2021

National Metrological Verification Regulations of the People's Republic of China, Diameter measuring system

JJG(机械) 85-1992 Verification regulations for tapered roller diameter, angle and linearity measuring instrument
JJG 380-1995 Verification Regulation of Instruments for Measuring the Diameter、Angle and Straightness of Bearing Tapered Roller
JJG 896-1995 Verification Regulation of the Characterization Systems for the Loss and Mode Field Diameter of Optical Fiber
JJG 2051-1990 Verification Scheme of Measuring Instruments for the D.C.Resistance
JJG 785-1992 Verification Regulation of Instrument for Measuring Place and Parallel of Radial Ball Bering Outes Race
JJG 785-2009 Verification Regulation of Deep Groove Ball Bearing Ring Raceway Diameter and Position Measuring Instrument
JJG 886-1995 Verification Regulation of Tester for Measuring Raceway Diameter and Angle of Tapered Roller Bearing Ring
JJG 2087-1990 Verification Scheme of Measuring Instruments for DC EMF'S
JJG 154-2020 Earth Pressure Measurement System

Association of German Mechanical Engineers, Diameter measuring system

VDI/VDE 2631 Blatt 4-1999 Form measuring systems - Determination of the radial spindle deviation
VDI/VDE 2648 Blatt 1-2009 Transducers and measuring systems for measurement of angle - Instructions for traceable calibration - Direct measure angle measuring systems
VDI/VDE 2648 Blatt 2-2007 Transducers and measuring systems for measurement of angle - Instructions for traceable calibration - Indirect measure angle measuring systems
VDI/VDE 2634 Blatt 1-2002 Optical 3D measuring systems - Imaging systems with point-by-point probing
VDI/VDE 2631 Blatt 8-2005 Form measurement - Stability monitoring of form measuring systems
VDI/VDE 2631 Blatt 8-2013 Form measurement - Stability monitoring of form measuring systems

AGMA - American Gear Manufacturers Association, Diameter measuring system

2015-2-A06-2006 Accuracy Classification System - Radial Measurements for Cylindrical Gears

RU-GOST R, Diameter measuring system

GOST R 51082-1997 Wheelchairs. Method of measurement of seating and wheel dimensions
GOST R 54062-2010 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
GOST R 54365-2011 Round timber. Top diameter and taper method of volume measurement
GOST 12447-1980 Hydraulic and pneumatic drives and lubricating systems. Standard diameters
GOST 26086-1984 Lasers. Methods for measurement of beam diameter and beam energy divergence angle
GOST R 8.687-2009 State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods
GOST R 8.833-2013 State system for ensuring the uniformity of measurements. State verification system for measuring equipment of DC voltage range ± (1 ... 500) kV
GOST R IEC 60793-1-45-2013 Optical fibres. Part 1-45. Measurement methods and test procedures. Mode field diameter
GOST 8.278-2013 State system for ensuring the uniformity of measurements. D. c. measuring voltage dividers. Verification methods
GOST 8.278-1978 State system for ensuring the uniformity of measurements. D.C. Measuring voltaqe dividers. Methods and means of verification
GOST 31634-2012 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
GOST R 8.877-2014 The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
GOST R 8.896-2015 State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
GOST R 8.874-2014 State system for ensuring the uniformity of measurements. Autocollimators. Verification procedure
GOST 8.207-1976 State system for ensuring the uniformity of measurements. Direct measurements with multiple observations. Methods of processing the results of observations. Basic principles
GOST 8.420-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation
GOST 8.420-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring straightness and flatness deviation
GOST 8.022-1991 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring instruments of direct current strength over range from 1·10 in minus 16 degree up to 30A
GOST 8.449-1981 State system for ensuring the uniformity of measurements. D. c. bridges. Methods and means of calibration
GOST R 55610-2013 Oil measuring systems. General specifications
GOST R ISO 10817-1-1999 Mechanical vibration. Rotating shaft vibration measuring systems. Part 1. Relative and absolute sensing of radial vibration
GOST R 8.674-2009 State system for ensuring the uniformity of measurements. General requirements for measuring instruments and systems and devices with measuring function
GOST 8.144-1997 State system for ensuring the uniformity of measurements. State verification schedule for measuring means of magnetic induction of state magnetic fields within the range from 0,05 TO 2 T
GOST R 8.818-2013 State system for ensuring the uniformity of measurements. Virtual measuring instruments and virtual measuring systems. General principles
GOST 8.437-1981 State system for ensuring the uniformity of measurements. Systems of information and measurement. Metrological ensurance. General statements

(U.S.) Ford Automotive Standards, Diameter measuring system

FORD FLTM CA 005-01-2011 MEASUREMENT OF GAUGE LOSS FROM CORROSION WITH A MICROMETER

IT-UNI, Diameter measuring system

UNI 6822-1971
UNI 6996-1971 Measuring instruments. Go and not go plug gauges for nominal sizes above 1,5 to 50 mm.
UNI 6992-1971 Measuring instruments. Go plug gauges for nominal sizes above 1,5 to 50 mm.
UNI 6993-1971 Measuring instruments go plug gauges for nominal sizes above 50 to 100 mm.
UNI 6976-1971 Measuring instruments. Go screw calliper gauges for ISO metric threads with nominal diameter above 1,5 to 100 mm
UNI 6977-1971 Measuring instruments. Not go screw calliper gauges for ISO metric threads with nominal diameter above 1,5 to 100 mm.
UNI 6983-1971 Measuring instruments. Setting plugs for adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 50 to 70 mm.
UNI 6972-1971 Measuring instruments. Solid go screw ring gauges for ISO metric threads with nominal diameter above 1,5 to 100 mm
UNI 6978-1971 Measuring instruments. Go and not go screw calliper gauges for ISO metric threads with nominal diameter above 1,5 to 100 mm.
UNI 6973-1971 Measuring instruments. Adjustable go screw ring gauges for ISO metric threads with nominal diameter above 1,5 to 70 mm.
UNI 6974-1971 Measuring instruments. Solid not go screw ring gauges for ISO metric threads with nominal diameter above 1,5 to 100 mm.
UNI 6975-1971 Measuring instruments. Adjustable not go screw ring gauges for ISO metric threads with nominal diameter above 1,5 to 70 mm.

American Society for Testing and Materials (ASTM), Diameter measuring system

ASTM F205-94(2005) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F205-94(2010)e1 Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F2117-10(2017) Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
ASTM F16-67(2006) Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
ASTM F16-12(2017) Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
ASTM F2117-10 Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
ASTM C1404/C1404M-98 Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
ASTM F2537-06 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
ASTM F16-12 Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
ASTM C585-90(2004) Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
ASTM C585-90(1998) Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
ASTM C585-09 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

PL-PKN, Diameter measuring system

PN G53045-1975 Wiercenia obrotowe normalno?rednicowe Sprawdzianu doci?gu gwintów rurowych przewodu wiertniczego
PN M55551-10-1985 Metal cutting machin? tools ethod of measurement of diameter tability of test piece
PN M55551-11-1987 Metal cutting machine tools Method of measurement of diameter stability of test piece

AENOR, Diameter measuring system

UNE 101360:1986 FLUID POWER SYSTEMS AND COMPONENTS. CYLINDER BORES AND PISTON DIAMETERS
UNE 40162-2:1975 CALIBRATION OF "AIR-FLOW" APPARATUS IN TESTS TO MEASURE AVERAGE DIAMETER OF WOOL FIBRES.
UNE 40162-1:1975 METHOD TO MEASURE AVERAGE DIAMETER OF WOOL FIBRES IN THE FORM OF COMBING WITH "AIR-FLOW" APPARATUS.
UNE 20502-14:1985 SOUND SYSTEM EQUIPMENT. CIRCULAR AND ELLIPTICAL LOUDSPEAKERS; OUTER FRAME DIAMETERS AND MOUNTING DIMENSIONS
UNE 20836:1992 BINARY DIRECT VOLTAGE SIGNALS FOR PROCESS MEASUREMENT AND CONTROL SYSTEMS.

International Federation of Trucks and Engines, Diameter measuring system

NAVISTAR TMS 1061-2014 VOID - Small Diameter Tubing For Engine Air/Fluid Systems

Military Standard of the People's Republic of China-General Armament Department, Diameter measuring system

GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system
GJB 315.1-1987 Equivalent diameter series of pendulum explosion-proof wave valve ventilation pipes
GJB 8958-2017 General specifications for airborne synthetic aperture radar interferometry systems
GJB 383.15A-1997 Telemetry system and sub-system test method direct recording system test method
GJB 383.15-1988 Telemetry system and sub-system test method direct recording system test method
GJB 4278-2001 Communication system measurement methods

Professional Standard - Medicine, Diameter measuring system

YY/T 0727.3-2009 Implants for surgery.Metal intramedullary nailing system.Part 3:Connection devices and reamer diameter measurements

ES-AENOR, Diameter measuring system

UNE 17 007
UNE 88-301-1992 Asbestos-cement vertical aeration systems. Dimensions and technical characteristics
UNE 17 014
UNE 4 004
UNE 20-502 Pt.14-1985

UY-UNIT, Diameter measuring system

CH-SNV, Diameter measuring system

VSM 10367-1977

RO-ASRO, Diameter measuring system

STAS R 584/1-1969
STAS SR ISO 3321:1995 Fluid power systems and components - Cylinder bores and piston rod diameters - Inch series
STAS 6926/6-1992 Road vehicles. Determination of drivability and measurement of turning diameters. Test methods
STAS 9070-1981 WOOL Determination of fibre diameter and of content of medullated fibres by tlie projection microscope
STAS 3633-1971 Non-adjustable plain hole gauges. PLUG-GAUGE, WITH THE DIAME- TER FROM 100 to 200 mm Dimensions
STAS 7320/2-1980 RUBBER O RINGS FOR FLUIDS SYSTEMS Inside diameters, crossections, tolerances and Identification code
STAS R 12641-1988 IONIZING RADIATION MEASUREMENT SYSTEMS FOR THICKNESS MEASUREMENTS
STAS 2981/1-1988 Non adjusable plain hole gauges PLUG GAUGES WITH NOMINAL DIAMETER FROM 1 UP TO 50 mm Dimensions
STAS 8221-1968
STAS 2981/2-1988 Non adjustable plain hole gauges PLUG GAUGES W1TH XOMINAL DFAMETER FROM 40 l'l' TO 120 mm Dimensions

IN-BIS, Diameter measuring system

AIA/NAS - Aerospace Industries Association of America Inc., Diameter measuring system

NAS9800-1998 Head Protrusion Gaging 100 Degree Flush Head Fasteners Gage Block@ Gage Diameters@ and Stylus

U.S. Air Force, Diameter measuring system

AIR FORCE A-A-59579 B-2012 TEST SET, FUEL CONTROL SYSTEM - AC/DC QUANTITY

European Committee for Electrotechnical Standardization（CENELEC）, Diameter measuring system

EN IEC 60793-1-45:2018 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
HD 557 S1-1990 Binary Direct Voltage Signals for Process Measurement and Control Systems
EN 61975:2010/A1:2017 High-voltage direct current (HVDC) installations - System tests

ES-UNE, Diameter measuring system

UNE-EN IEC 60793-1-45:2018 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
UNE-EN 61975:2010 High-voltage direct current (HVDC) installations - System tests (Endorsed by AENOR in January of 2012.)
UNE-EN 61975:2010/A2:2022 High-voltage direct current (HVDC) installations - System tests (Endorsed by Asociación Española de Normalización in January of 2023.)
EN IEC 63027:2023 Photovoltaic power systems - DC arc detection and interruption
UNE-EN 61685:2001 Ultrasonics - Flow measurement systems - Flow test object (Endorsed by AENOR in March of 2006.)
IEEE 2832-2023 IEEE Guide for Control and Protection System Test of Hybrid Multi-terminal High Voltage Direct Current (HVDC) Systems

Professional Standard - Coal, Diameter measuring system

MT 93-1984 Pressure, flow and plunger diameter series of emulsion pumps used in coal mines

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Diameter measuring system

GB/T 35711-2017 Analysis, restrain and measurement of harmonics of DC side of high voltage direct current (HVDC) transimission system

Aerospace Industries Association/ANSI Aerospace Standards, Diameter measuring system

AIA/NAS NAS9800-2010 HEAD PROTRUSION GAGING, 100?FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS Rev 2
AIA/NAS NAS9800-2014 HEAD PROTRUSION GAGING, 100° FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS (Rev 3)
AIA/NAS NAS 9800-2008 HEAD PROTRUSION GAGING, 100?FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS Rev 1

TR-TSE, Diameter measuring system

TS 1009-1971 AIR PERMEABILITY METHOD FOR MEASURING THE MEAN DIAMETER OF WOOL FIBRES

ZA-SANS, Diameter measuring system

SANS 60793-1-45:2001 Optical fibres Part 1-45: Measurement methods and test procedures - Mode field diameter
SANS 10159:1982 Measurement and calibration systems

(U.S.) Telecommunications Industries Association , Diameter measuring system

TIA-455-48-B-1990 FOTP- 48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
TIA-455-48-B-2000(2014) FOTP- 48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
TIA-873.006-1[E]-2006 All-IP Core Network Multimedia Domain Cx Interface Based on the Diameter Protocol; Protocol Details Addendum to TIA-873.006
TIA-873.006-2003 All-IP Core Network Multimedia Domain ?Cx Interface Based on the Diameter Protocol; Protocol Details
TIA-873.011-1[E]-2006 All-IP Core Network Multimedia Domain Sh Interface Based on Diameter Protocols ?Protocol Details ?Stage 3 Addendum to TIA-873.011
TIA-873.011-2003 All-IP Core Network Multimedia Domain ?Sh Interface Based on Diameter Protocols ?Protocol Details ?Stage-3
TIA-455-191-B-2003 FOTP- 191 IEC-60793-1-45 Optical Fibres- Part 1-45: Measurement Methods and Test Procedures- Mode Field Diameter
TIA-455-58-B-2001 FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers (ANSI APPROVAL WITHDRAWN JUNE 2003)

Japanese Industrial Standards Committee (JISC), Diameter measuring system

JIS B 8032-2:2016 Internal combustion engines -- Small diameter piston rings -- Part 2: Inspection measuring principles
JIS B 8032-2:1998 Internal combustion engines -- Small diameter piston rings -- Part 2: Inspection measuring principles
JIS B 8037-2:1998 Internal combustion engines -- Large diameter piston rings -- Part 2: Inspection measuring principles
JIS B 8366-1:2000 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters -- Metric series
JIS B 8366-1:2018 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters and area ratios
JIS K 0804:2022 Gas detector tube measurement system
JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
JIS Z 2324-4:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 4: Method of testing for performance characteristics of eddy current inspection system

Institute of Electrical and Electronics Engineers (IEEE), Diameter measuring system

IEEE 2657-2021 IEEE Guide for Energy Feedback System for DC Traction Power Supply System
IEEE Std 2657-2021 IEEE Guide for Energy Feedback System for DC Traction Power Supply System
IEEE P2657/D2.3, May 2021 IEEE Draft Guide on Energy Feedback Systems for DC Traction Power Supply System
IEEE P2657/D2.2, April 2021 IEEE Draft Guide on Energy Feedback Systems for DC Traction Power Supply System
IEEE P2657/D2, November 2020 IEEE Draft Guide on Energy Feedback Systems for DC Traction Power Supply System
IEEE Std 368-1977 IEEE Recommended Practice for Measurement of Electrical Noise and Harmonic Filter Performance of High-Voltage Direct-Current Systems
IEEE Unapproved Draft Std P1653.4/D2.0, Jun 2009 IEEE Standard for dc Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 Volts dc Nominal
IEEE P1653.4/D3, November 2010 IEEE Standard for DC Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 V DC Nominal
IEEE Std 1653.4-2011 IEEE Standard for DC Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 V DC Nominal

Professional Standard - Education, Diameter measuring system

JY/T 0591.1-2020 General Principles of Physical Property Measurement System Methods Part 1: DC Magnetic Test

YU-JUS, Diameter measuring system

JUS K.T3.131-1983 NOTGO gauging memberes for holes over 40 to 120 mm nominal diameter cylindrical plug gauges
JUS K.T3.112-1983 Tile gauges GO and NOTGO for measures over 2 up to and including 8 mm nominal si?e
JUS K.T3.111-1983 Tile gauges GO and NOT GO for measures up to including 12 mm nominal si?e

International Electrotechnical Commission (IEC), Diameter measuring system

IEC 60793-1-45:2001 Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter
IEC 60793-1-45:2001/COR1:2002 Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter
IEC 60793-1-45:2017 RLV Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
IEC 60793-1-45:2017 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
IEC 60946:1988 Binary direct voltage signals for process measurement and control systems
IEC 61975:2010 High-voltage direct current (HVDC) installations - System tests
IEC 61975:2016 High-voltage direct current (HVDC) installations - System tests
IEC 63027:2023 Photovoltaic power systems - DC arc detection and interruption
IEC 60510-1A:1980 Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. First supplement: Sub-clause 6.2: D.C. source conditions

BELST, Diameter measuring system

STB 2450-2016 Management systems. Measurement management. Measurement system analysis
STB 1682-2009 Circuits and paths of digital transmission systems. Main parameters, norms and measurement methods
STB 1630-2016 Terrestrial digital television broadcasting system. Signals and paths. General parameters and measurement methods
STB 8087-2021 System for ensuring the uniformity of measurements of the Republic of Belarus. DC electricity meters of electric energy of direct current. Methods of verification
STB 2127-2016 Digital television broadcasting system. Path of forming and transmitting of digital television signals. Links of the path, general parameters and measurement signals
STB 2351-2013 System for ensuring the uniformity of measurements of the Republic of Belarus. Electric transducers. Direct current measuring shunts. Methods of verification
STB 8029-2006 System for ensuring the uniformity of measurements of the Republic of Belarus. State verification chedule for measuring instruments of direct electrical voltage and electromotive force
STB 8078-2018 System for ensuring the uniformity of measurements of the Republic of Belarus. DC Kiloampermetr. Methods of verification

Group Standards of the People's Republic of China, Diameter measuring system

T/CIECCPA 007-2022 Technical specification for on-line quality and quantity monitoring in pipeline direct drinking water system
T/ZZB 0708-2018 Insulation monitoring device for DC power supply system
T/CDHA 11-2022 Technical conditions of optical fiber monitoring system for directly buried heating pipeline

NZ-SNZ, Diameter measuring system

AS/NZS 4492.3:2000 Wool - Fleece Testing and Measurement Method 3: Measurement of Mean Fibre Diameter Using Airflow and Sonic A Instruments

Compressed Gas Association (U.S.), Diameter measuring system

CGA V-5-2008 Diameter index safety system (Noninterchangeable low pressure connections for medical gas applications)
CGA V-5-2005 DIAMETER INDEX SAFETY SYSTEM (NONINTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS)

CENELEC - European Committee for Electrotechnical Standardization, Diameter measuring system

EN 61975:2010 High-voltage direct current (HVDC) installations - System tests

Indonesia Standards, Diameter measuring system

SNI IEC 61975:2012 High-voltage direct current (HVDC) installation - System test
SNI 13-3503-1994 Natural gas measurement system
SNI 04-6545.8-2003 Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring, or monitoring of protective measures. Part 8: Insulation monitoring devices for IT systems
SNI ISO 10012:2009 Measurement management systems - Requirements for measurement processes and measuring equipment
SNI ISO/ASTM 51631:2014

American Gear Manufacturers Association, Diameter measuring system

AGMA 2015-2-A06-2006 Accuracy Classification System - Radial Measurements for Cylindrical Gears

United States Navy, Diameter measuring system

NAVY MIL-M-24359-1969 METERS, MILLIMETERS, DIRECT CURRENT PANEL MOUNTING (EDGEWISE TYPES)
NAVY MIL-S-29398 C NOTICE 1-1998 SLING SYSTEM, HELICOPTER: EXTERNAL CARGO, 40,000 POUND CAPACITY
NAVY MIL-S-29398 C (2)-1985 SLING SYSTEM, HELICOPTER: EXTERNAL CARGO, 40,000 POUND CAPACITY
NAVY MIL-S-29398 C-1984 SLING SYSTEM, HELICOPTER: EXTERNAL CARGO, 40,000 POUND CAPACITY

未注明发布机构, Diameter measuring system

BS ISO 10817-1:1998(2000) Rotating shaft vibration measuring systems — Part 1 : Relative and absolute sensing of radial vibration
BS 919-4:2007(2009) Screw gauge limits and tolerances – Part 4 : Limits of size for gauges for screw threads of unified form diameters in and larger

Professional Standard - Electricity, Diameter measuring system

DL/T 1015-2006 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 1015-2019 Guidelines for the use of voltage measurement systems for on-site DC and AC withstand voltage tests
DL/T 1582-2016 Guide for instruments test of HVDC valve cooling system
DL/T 1474-2021 Measurement and evaluation method of hydrophobicity of high voltage polymer insulators for AC and DC systems
DL/T 1397.4-2014 General specification for DC power system test equipments of electric power system.Part 4: Testing system of DC circuit breaker operating characteristics
DL/T 1474-2015 Method for measuring hydrophobicity of composite insulators used in AC and DC systems with nominal voltage higher than 1000V
DL/T 1392-2014 Technical specification of insulation monitoring devices for DC power system

Professional Standard - Radio Television Film, Diameter measuring system

GY/T 232-2011 Technical Requirements and Measurement Methods of Integrated Downconverter for Satellite Live Broadcasting System
GY/T 232-2008 Technical requirements and measurement methods of direct broadcasting satellite system LNBF

国家煤矿安全监察局, Diameter measuring system

MT/T 1173-2019 Measuring method of coal seam permeability coefficient—radial flow method

U.S. Military Regulations and Norms, Diameter measuring system

ARMY UFGS-28 31 00.00 10-2008 FIRE DETECTION AND ALARM SYSTEM, DIRECT CURRENT LOOP
ARMY MIL-STD-188-190 VALID NOTICE 2-2013 Methods for Communications Systems Measurements

GOSTR, Diameter measuring system

GOST R 59030-2020 High-voltage direct current systems. Types and test methods
GOST R IEC 61685-2020 Ultrasonics. Flow measurement systems. Flow test object

American Railway Engineering and Maintenance-of-Way Association (AREMA), Diameter measuring system

AREMA CH 2-1996 Track Measuring Systems

US-FCR, Diameter measuring system

FCR DOE 5530.4-1991 AERIAL MEASURING SYSTEM
FCR COE CERC-90-2 FINAL REPORT-1990 HELICOPTER LIDAR BATHYMETER SYSTEM; CONCEPTUAL DESIGN

Society of Motion Picture and Television Engineers (SMPTE), Diameter measuring system

SMPTE 266-2012 SD Digital Component Systems - Digital Vertical Interval Time Code
SMPTE ST 266-2012 SD Digital Component Systems - Digital Vertical Interval Time Code

工业和信息化部, Diameter measuring system

YD/T 3730-2020 VHF/UHF Radio Direction Finding System Multipath Propagation Immunity Test Procedure

IEC - International Electrotechnical Commission, Diameter measuring system

PAS 61975-2004 System tests for high-voltage direct current (HVDC) installations (Edition 1.0)

Lithuanian Standards Office , Diameter measuring system

LST EN 61975-2011 High-voltage direct current (HVDC) installations - System tests (IEC 61975:2010)
LST HD 557 S1-2002 Binary direct voltage signals for process measurement and control systems (IEC 60946:1988)
LST EN 60793-1-45-2004 Optical fibres. Part 1-45: Measurement methods and test procedures. Mode field diameter (IEC 60793-1-45:2001 + corrigendum 2002, modified)

Professional Standard - Traffic, Diameter measuring system

JT/T 342.1-1995 Ship stern shaft and sealing device thin sleeve bearing flanging rubber sealing system basic diameter 40-100mm

AIAG - Automotive Industry Action Group, Diameter measuring system

MSA-2002 Measurement Systems Analysis (MSA)

International Telecommunication Union (ITU), Diameter measuring system

ITU-R BO.1658 FRENCH-2003 Continuous curves of epfd. versus the geostationary broadcasting-satellite service earth station antenna diameter to indicate the protection afforded by systems complying with the limits of antennas with diameters other than those in Article 22 of the Rad
ITU-R BO.1658-2003 Continuous curves of epfd. versus the geostationary broadcasting-satellite service earth station antenna diameter to indicate the protection afforded by systems complying with the limits of antennas with diameters other than those in Article 22 of the Rad

AREMA - American Railway Engineering and Maintenance-of-Way Association, Diameter measuring system

CHAPTER 2-2001 Track Measuring Systems (Volume 4/Systems Management)
CHAPTER 2- Track Measuring Systems (Volume 4/Systems Management)

CN-QIYE, Diameter measuring system

Q/GDW 1901.4-2013
Q/GDW 1901.4―2013 General technical requirements for test equipment for electric DC power supply systems Part 4: Test system for operating characteristics of DC circuit breakers

European Telecommunications Standards Institute (ETSI), Diameter measuring system

ETSI TS 129 283-2017 LTE; Universal Mobile Telecommunications System (UMTS); Diameter data management applications (V14.3.0; 3GPP TS 29.283 version 14.3.0 Release 14)
ETSI TS 129 283-2016 LTE; Universal Mobile Telecommunications System (UMTS); Diameter data management applications (V13.0.0; 3GPP TS 29.283 version 13.0.0 Release 13)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Diameter measuring system

IEEE 368-1977 RECOMMENDED PRACTICE FOR MEASUREMENT OF ELECTRICAL NOISE AND HARMONIC FILTER PERFORMANCE OF HIGH- VOLTAGE DIRECT-CURRENT SYSTEMS

Professional Standard - Railway, Diameter measuring system

TB/T 3015.1-2001 Rolling circle diameter calipers

Professional Standard - Machinery, Diameter measuring system

JB/T 12637-2016 White light 3D measuring systems

ETSI - European Telecommunications Standards Institute, Diameter measuring system

TS 129 283-2016 LTE; Universal Mobile Telecommunications System (UMTS); Diameter data management applications (V13.1.0; 3GPP TS 29.283 version 13.1.0 Release 13)
TS 129 283-2018 LTE; Universal Mobile Telecommunications System (UMTS); Diameter data management applications (V15.0.0; 3GPP TS 29.283 version 15.0.0 Release 15)
TS 129 283-2017 LTE; Universal Mobile Telecommunications System (UMTS); Diameter data management applications (V14.2.0; 3GPP TS 29.283 version 14.2.0 Release 14)
TS 132 299-2006 Universal Mobile Telecommunications System (UMTS); Telecommunication management; Charging management; Diameter charging applications (3GPP TS 32.299 version 6.9.0 Release 6)
TS 132 299-2004 Universal Mobile Telecommunications System (UMTS); Telecommunication management; Charging management; Diameter charging applications (3GPP TS 32.299 Version 6.1.0 Release 6)
TS 132 299-2005 Universal Mobile Telecommunications System (UMTS); Telecommunication management; Charging management; Diameter charging applications (3GPP TS 32.299 Version 7.0.0 Release 7)

European Association of Aerospace Industries, Diameter measuring system

AECMA PREN 9107-2005 Aerospace series Quality systems Direct Delivery Authorization Guidance for Aerospace Companies Edition P 1
AECMA PREN 9114-2005 Aerospace series Quality systems Direct Ship Guidance for Aerospace Companies Edition P 1

American Society of Quality Control （ASQC), Diameter measuring system

ASQ T810-2003 Measurement management systems Requirements for measurement processes and measuring equipment

European Committee for Standardization (CEN), Diameter measuring system

prEN ISO 10012 rev Measurement management systems - Requirements for measurement processes and measuring equipment