ZH
RU
ES

Intensive Test 47

Intensive Test 47, Total:500 items.

In the international standard classification, Intensive Test 47 involves: Fibre optic communications, Environmental testing, Electrical accessories, Road engineering, Semiconductor devices, Pipeline components and pipelines, Construction materials, Rubber and plastics products, Kitchen equipment, Rubber, Electrical engineering in general, Surface treatment and coating, Air quality, Leather technology, Reinforced plastics, Analytical chemistry, Components for electrical equipment, Linear and angular measurements, Raw materials for rubber and plastics, Earthworks. Excavations. Foundation construction. Underground works, Products of the textile industry, Electricity. Magnetism. Electrical and magnetic measurements, Products of the chemical industry, Non-ferrous metals, Plastics, Footwear, Electromechanical components for electronic and telecommunications equipment, Transport, Road vehicle systems, Diagnostic, maintenance and test equipment, Road vehicles in general, Printed circuits and boards, Testing of metals, Adhesives, Wood, sawlogs and sawn timber, Machine tools, Pulps, Paper and board, Materials for aerospace construction, Optoelectronics. Laser equipment, Textile fibres, Iron and steel products, Magnetic materials, Electrical and electronic testing, Medical equipment, Powder metallurgy, Protection against fire, Soil quality. Pedology, Non-textile floor coverings, Protective equipment, Burners. Boilers, Paint ingredients.

German Institute for Standardization, Intensive Test 47

DIN EN 60068-2-47:2006-03 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005); German version EN 60068-2-47:2005 / Note: DIN EN 60068-2-47 (2000-08) remains valid alongside this standard until 20...
DIN EN 60793-1-47:2010 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss (IEC 60793-1-47:2009); German version EN 60793-1-47:2009
DIN EN 61300-2-47:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2016); German version EN 61300-2-47:2016
DIN EN 61300-2-47:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010); German version EN 61300-2-47:2010
DIN EN 61300-2-47 Berichtigung 1:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks - (IEC 61300-2-47:2010); German version EN 61300-2-47:2010, Corrigendum to DIN EN 61300-2-47:2011-05; (IEC-Cor. :2011 to
DIN EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010
DIN EN 12390-5:2019-10 Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2019
DIN EN 12390-3:2019-10 Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2019
DIN EN 61300-2-47:2017-06 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2016); German version EN 61300-2-47:2016 / Note: DIN EN 61300-2-47 (2011-05) and DIN EN 61300-2-47 Be...
DIN EN 12390-5:2019 Testing hardened concrete - Part 5: Flexural strength of test specimens
DIN EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens
DIN EN 12390-2:2019 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
DIN EN IEC 61810-7-47:2022-10 All-or-nothing electrical relays - Tests and Measurements - Part 7-47: Making and breaking capacities (IEC 94/563/CD:2021); Text in German and English / Note: Date of issue 2022-09-02
DIN EN 60793-1-47:2008 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss (IEC 60793-1-47:2006); German version EN 60793-1-47:2007
DIN EN 12390-2:2019-10 Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2019
DIN EN 13329:2023-03 Laminate floor coverings - Specifications, requirements and test methods; German and English version prEN 13329:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN 13329 (2021-11), DIN EN 14978 (2021-11), DIN EN 15468 (2021-11).
DIN EN 12390-4:2020 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
DIN EN 12390-6:2022 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German and English version prEN 12390-6:2022
DIN EN 12390-6:2022-07 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German and English version prEN 12390-6:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN EN 12390-6 (2010-09).
DIN EN 12390-4:2020-04 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines; German version EN 12390-4:2019
DIN EN 12390-6:2010-09 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2009 / Note: To be replaced by DIN EN 12390-6 (2022-07).
DIN EN 12697-47:2021-10 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts; German and English version prEN 12697-47:2021 / Note: Date of issue 2021-09-03*Intended as replacement for DIN EN 12697-47 (2010-12).
DIN EN IEC 61631:2022-12 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020); German version EN IEC 61631:2020 / Note: DIN EN 61631 (2002-08) remains valid alongside this standard until 2023-06-11.
DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN EN 61300-3-47:2015-04 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry (IEC 61300-3-47:2014); German...
DIN EN 61300-3-47:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry (IEC 61300-3-47:2014); German ve
DIN EN 1015-11:2020-01 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar; German version EN 1015-11:2019
DIN EN 13286-47:2022 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling; German version EN 13286-47:2021
DIN EN 61300-2-47:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2006); German version EN 61300-2-47:2007
DIN EN 12697-47:2010-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010 / Note: To be replaced by DIN EN 12697-47 (2021-10).
DIN EN 13286-47:2012 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling; German version EN 13286-47:2012
DIN EN ISO 10580:2012-04 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010); German version EN ISO 10580:2012
DIN EN IEC 60749-37:2023 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV:2020); German and English version prEN IEC 60749-37:2020
DIN EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
DIN ISO 24334:2020-11 Laminate floor coverings - Determination of locking strength for mechanically assembled panels (ISO 24334:2019)
DIN 54518:2022-01 Testing of paper and board - Compression strength, short span test
DIN EN 13408:2002 Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength; German version EN 13408:2002
DIN 10970:2002-09 Sensory analysis - Time intensity test
DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
DIN 65148:1986-11 Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test
DIN EN ISO 4044:2017-05 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017); German version EN ISO 4044:2017

AENOR, Intensive Test 47

UNE-EN 60068-2-47:2006 Environmental testing -- Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005)
UNE-EN 12390-4:2001 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines.
UNE-EN 61300-2-47:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-47: Tests - Thermal shocks
UNE-EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
UNE-EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 12390-2:2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
UNE-EN 12390-6:2010 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
UNE 49408-5:1975 TEST OF PAPER BAGS. TENSILE STRENGTH OF LONGITUDINAL STRENGTH
UNE 49408-3:1974 TEST OF PAPER BAGS. COMPRESSIVE STRENGTH
UNE-EN 1015-11:2000/A1:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
UNE-EN 1015-11:2000 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
UNE 49408-1:1975 PAPER BAGS TESTS. STRENGHT TO WATER OF GUMMING
UNE-EN ISO 3344:1998 REINFORCEMENT PRODUCTS. DETERMINATION OF MOISTURE CONTENT. (ISO 3344:1997).
UNE-EN 12697-47:2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts

American National Standards Institute （ANSI), Intensive Test 47

ANSI/TIA-455-62-C-2020 IEC-60793-1-47 Optical Fibres - Part 1-47: Measurement Methods and Test Procedures- Macrobending Loss

Lithuanian Standards Office , Intensive Test 47

LST EN 60793-1-47-2009 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss (IEC 60793-1-47:2009)
LST EN 60793-1-47-2003 Optical fibres. Part 1-47: Measurement methods and test procedures. Macrobending loss (IEC 60793-1-47:2001)
LST EN 60068-2-47-2005 Environmental testing. Part 2-47: Tests. Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005)
LST EN 61300-2-47-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010)
LST EN 12390-5-2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
LST EN 12390-3-2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
LST EN 12390-3-2009/AC-2011 Testing hardened concrete - Part 3: Compressive strength of test specimens
LST EN 12390-2-2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
LST EN 12390-4-2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
LST EN 12390-6-2010 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
LST EN 61631-2002 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2001)
LST EN 1015-11-2002 Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar
LST EN 1015-11-2002/A1-2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
LST EN 12697-47-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts

European Committee for Standardization (CEN), Intensive Test 47

CENELEC EN 60068-2-47-2005 Environmental testing Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005)
prEN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
EN 12697-47:2023 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
EN 12390-3-2019(F) Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-3:2001 Testing Hardened Concrete - Part 3: Compressive Strength of Test Specimens
EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures
EN 1170-4:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
PD CEN/TS 16354:2013 Laminate floor coverings - Underlays - Specification@ requirements and test methods
EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)
EN 12390-6:2009 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens

(U.S.) Telecommunications Industries Association , Intensive Test 47

TIA-455-62-B-2003 FOTP-62 IEC-60793-1-47 Optical Fibres - Part 1-47: Measurement Methods and Test Procedures - Macrobending Loss

British Standards Institution (BSI), Intensive Test 47

21/30444905 DC BS EN IEC 61810-7-47. All-or-nothing electrical relays. Tests and Measurements - Part 7-47. Making and breaking capacities
21/30438592 DC BS EN 12697-47. Bituminous mixtures. Test methods - Part 47. Determination of the ash content of natural asphalts
23/30454374 DC BS EN IEC 62047-47. Semiconductor devices. Micro-electromechanical devices - Part 47. Silicon based MEMS fabrication technology. Measurement method of bending strength of microstructures
BS ISO 1920-4:2020 Testing of concrete - Strength of hardened concrete
BS EN 12390-2:2019 Tracked Changes. Testing hardened concrete. Making and curing specimens for strength tests
BS EN 60793-1-47:2007 Optical fibres - Measurement methods and test procedures - Macrobending loss
BS EN 12390-5:2019 Tracked Changes. Testing hardened concrete. Flexural strength of test specimens
BS EN 12390-3:2019 Tracked Changes. Testing hardened concrete. Compressive strength of test specimens
BS EN 1170-8:2008 Test method for glassfibre reinforced cement Part 8: Cyclic weathering type test
20/30410968 DC BS EN 13286-47. Unbound and hydraulically bound mixtures. Part 47. Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
BS EN 1015-11:2019 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS EN 12390-3:2002 Testing hardened concrete - Compressive strength of test specimens
BS EN 12390-3:2009 Testing hardened concrete - Compressive strength of test specimens
18/30367556 DC BS ISO 1920-4. Testing of concrete. Part 4. Strength of hardened concrete
19/30394521 DC BS EN IEC 61631. Test method for the mechanical strength of cores made of magnetic oxides
22/30454319 DC BS EN 12390-6. Testing hardened concrete - Part 6. Tensile splitting strength of test specimens
BS EN 12390-4:2000 Testing hardened concrete - Compressive strength - Specification for testing machines
BS EN 12390-4:2019 Testing hardened concrete - Compressive strength - Specification for testing machines
BS EN 196-1:2005 Methods of testing cement - Determination of strength
BS ISO 9026:2007 Raw rubber or unvulcanized compounds - Determination of green strength
BS ISO 34-2:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS 903-A62:1993 Physical testing of rubber - Method for determination of green strength of raw rubber of unvulcanized compounds
BS ISO 34-2:2011 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS EN 12390-6:2000 Testing hardened concrete - Tensile splitting strength of test specimens
BS EN 12390-6:2009 Testing hardened concrete - Tensile splitting strength of test specimens
BS EN 12390-6:2010 Testing hardened concrete. Tensile splitting strength of test specimens
BS EN 6032:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of the glass transition temperatures
BS ISO 4647:2010 Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
BS EN 12390-5:2009 Testing hardened concrete Part 5: Flexural strength of test specimens
BS EN 60068-2-77:1999 Environmental testing. Test methods. Body strength and impact shock
ASME B31.J-2008 Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
BS EN 60068-2-14:2009 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
BS EN IEC 60068-2-14:2023 Environmental testing - Tests. Test N: Change of temperature

Association Francaise de Normalisation, Intensive Test 47

NF EN 60068-2-47:2005 Essais d'environnement - Partie 2-47 : essais - Fixation de spécimens pour essais de vibrations, d'impacts et autres essais dynamiques
NF C93-840-1-47*NF EN IEC 60793-1-47:2018 Optical fibres - Part 1-47 : measurement methods and test procedures - Macrobending loss
NF EN IEC 60793-1-47:2018 Fibres optiques - Partie 1-47 : méthodes de mesure et procédures d'essai - Pertes par macrocourbures
NF T46-033:1977 VULCANIZED RUBBERS-DETERMINATION OF TEARSTRENGTH OF SMALL TEST PIECES(DELFT TEST PIECES).
NF C93-902-47*NF EN 61300-2-47:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47 : tests - Thermal shocks
NF EN 61300-2-47:2017 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-47 : essais - Chocs thermiques
NF C93-840-1-47:2007 Optical fibres - Part 1-47 : measurement methods and test procedures - Macrobending loss.
NF EN 16354:2018 Revêtements de sol stratifiés - Sous-couches - Spécifications, exigences et méthodes d'essai
NF EN IEC 61631:2020 Méthode d'essai pour la résistance mécanique des noyaux en oxydes magnétiques
NF EN ISO 2418:2023 Cuir - Essais chimiques, physiques, mécaniques et essais de solidité - Emplacement et préparation des spécimens pour les essais
NF C93-840-1-47:2002 Optical fibres - Part 1-47 : measurement methods and test procedures - Macrobending loss.
NF C93-902-47:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47 : tests - Thermal shocks.
NF ISO 24338:2022 Revêtements de sol stratifiés - Détermination de la résistance à l'abrasion
NF EN 12390-6:2012 Essais pour béton durci - Partie 6 : détermination de la résistance en traction par fendage d'éprouvettes
NF T43-117:1994 Raw rubber or unvulcanized compounds. Determination of green strength.
NF ISO 24337:2020 Revêtements de sol stratifiés - Détermination des caractéristiques géométriques
NF ISO 24335:2022 Revêtements de sol stratifiés - Détermination de la résistance aux chocs
NF C93-902-47:2005 Fibre optic inerconnecting devices and passive components - Basic test and measurement procedures - Part 2-47 : tests - Thermal shocks.
NF C93-902-47:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47 : tests - Thermal shocks.
NF EN 12697-47:2010 Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 47 : détermination de la teneur en cendres des bitumes naturels
NF T43-117:2007 Raw rubber or unvulcanized compounds - Determination of green strength.
NF T43-117*NF ISO 9026:2021 Raw rubber or unvulcanized compounds - Determination of green strength
NF T76-125:1986 Adhesives. Conventional determination of setting strength.
NF P98-818-47*NF EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47 : determination of the ash content of natural asphalts.
NF T46-049:2010 Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test.
NF T46-049*NF ISO 4647:2021 Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test
NF P18-430-5:2012 Testing hardened concrete - Part 5 : flexural strength of test specimens.
NF C26-245:1990 Test procedure for thermal indurance of insulating varnishes. Electric strength method.
NF G07-132:1984 Textiles - Essais des tissus - Détermination de la résistance à l'effilochage - Essai à sec
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
NF P18-455:2003 Testing hardened concrete - Part 3 : compressive strength of test specimens.
NF P18-430-3:2012 Testing hardened concrete - Part 3 : compressive strength of test specimens.
NF ISO 34-2:2022 Caoutchouc vulcanisé ou thermoplastique - Détermination de la résistance au déchirement - Partie 2 : Petites éprouvettes (éprouvettes de Delft)
NF T46-004:1985 Vulcanized or thermoplastic rubber. Accelerated ageing or heat resistance determination forced air oven test.
NF A95-431:1993 Hardmetals. Determination of (the magnetization) coercivity.
NF EN ISO 4044:2017 Cuir - Essais chimiques - Préparation des échantillons pour essais chimiques

Danish Standards Foundation, Intensive Test 47

DS/EN 60793-1-47:2009 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
DS/EN 61300-2-47:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
DS/EN 12390-3+AC:2013 Testing hardened concrete - Part 3: Compressive strength of test specimens
DS/EN 12390-5:2013 Testing hardened concrete - Part 5: Flexural strength of test specimens
DS/EN 12390-2:2013 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
DS/EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
DS/EN 12390-6:2013 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
DS/ISO 816:1985 Rubber, vulcanized. Determination of tear strength of small test pieces (Delft test pieces)
DS/EN 1015-11/A1:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
DS/EN 1015-11:2002 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
DS 13080-1:1988 Steel for reinforcement. Part 1: Steel for reinforcement used without prestressing in concrete structures. Requirements. Testing
DS/ISO 34:1980 Rubber, vulcanized. Determination of tear strength (trouser, angle and crescent test pieces)
DS 423.23:1984 Testing of concrete. Hardened concrete. Compressive strength
DS 423.24:1984 Testing of concrete. Hardened concrete. Tensile strength
DS 423.31:1984 Testing of concrete. Hardened concrete. Pull-out strength
DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method
DS/EN 23326:1994 Hardmetals-Determination of (the magnetization) coercivity
DS/EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts

European Committee for Electrotechnical Standardization（CENELEC）, Intensive Test 47

EN IEC 60793-1-47:2018 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
EN 60793-1-47:2009 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
EN 60793-1-47:2018 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
EN 61300-2-47:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
EN 61300-2-47:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
EN IEC 61249-2-47:2018 Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (2.0W/m K) and defined flammabilit

ES-UNE, Intensive Test 47

UNE-EN IEC 60793-1-47:2018 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
UNE-EN 12390-3:2020 Testing hardened concrete - Part 3: Compressive strength of test specimens
UNE-EN 61300-2-47:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (Endorsed by AENOR in October of 2016.)
UNE-EN 12390-5:2020 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN 12390-2:2020 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
UNE-EN 12390-4:2020 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
UNE-EN 1015-11:2020 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
UNE-EN ISO 10580:2012 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010)
UNE-EN IEC 61249-2-47:2018 Materials for printed boards and other interconnecting structures – Part 2-47: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined ...
UNE-EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures (Endorsed by AENOR in January of 2016.)
UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
UNE-EN ISO 4044:2018 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017)

Korean Agency for Technology and Standards (KATS), Intensive Test 47

KS M 3380-2009 General rules for testing methods of glass fiber reinforced plastics
KS C IEC 60793-1-47:2020 Optical fibres — Part 1-47: Measurement methods and test procedures — Macrobending loss
KS C IEC 60793-1-47:2014 Optical fibres — Part 1-47: Measurement methods and test procedures — Macrobending loss
KS C IEC 60793-1-47:2004 Optical fibres-Part 1-47:Measurement methods and test procedures-Macrobending loss
KS M 3385-2004 Testing method for transverse shear strength of glass fiber reinforced plastics
KS M 3083-2004 Testing method for chemical resistance of fiber reinforced plastics
KS M 3386-2004 Testing method for in-plane shear properties of glass fiber reinforced plastics
KS M 3384-2004 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
KS B 5345-1998(2018) Forced air circulation oven type thermal accerelated aging testers
KS M 3387-2004 Testing method for Barcol hardness of glass fiber reinforced plastics
KS F 2232-2004 Testing method for bending strength of polystyrene composite wood wool cement boards
KS M 3707-1992(1997) TESTING METHODS FOR CARBON FIBER CONTENT AND VOID CONTENT OF CARBON FIBER REINFORCED PLASTICS
KS C IEC 61631-2006(2016) Test method for the mechanical strength of cores made of magnetic oxides
KS D 8514-1998(2018) Test methods for dielectric strength of anodic oxidation coatings on aluminium and aluminium alloys
KS M ISO 9026:2012 Raw rubber or unvulcanized compounds－ Determination of green strength
KS F 2232-2004(2014) Testing method for bending strength of polystyrene composite wood wool cement boards
KS R 1146-2002(2007) Roof crush resistance test method
KS M 6787-2009 Adhesion testing methods for vulcanized rubber
KS F 2539-1995 Method for securing,preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
KS F 2233-2004 Testing method for transverse tensile strength of polystyrene composite wood wool cement boards
KS D 8508-1997 Test method for tensile properties of fiber reinforced metals
KS D 8509-1997 Test method for fatigue properties of fiber reinforced metals
KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS M 7056-1982(2002) TESTING METHOD FOR PUNCTURE OF PAPERBOARD
KS L 5100-2006 Standard sand for testing strength of hydraulic cement mortars
KS M 7056-1982 TESTING METHOD FOR PUNCTURE OF PAPERBOARD
KS M ISO 4647-2014(2019) Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
KS M ISO 9026-2012(2017) Raw rubber or unvulcanized compounds－ Determination of green strength
KS M 3708-2002 Testing method for bearing strength of carbon fiber reinforced plastics
KS D 8513-2003 Test method for compressive properties of fiber reinforced metals
KS M 3083-1994 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2014 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2004(2009) Testing method for chemical resistance of fiber reinforced plastics
KS M ISO 34-2:2009 Rubber, vulcanized or thermoplastic-Determination of tear strength-Part 2:Small(Delft) test pieces
KS M ISO 34-2:2014 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small(Delft) test pieces
KS M 1424-2009 Testing method for compressive properties of media for water treatment
KS L ISO 679:2006 Methods of testing cements－Determination of strength
KS K 0745-1999 Test method for seam strength of sewn geotextiles
KS K 0769-2007(2012) Test method for tearing strength of geotextile
KS M 7050-2020 Testing method for surface strength of paper by wax
KS M 7050-1969 Testing method for surface strength of paper by wax
KS K 0536-2009 Testing method for tearing strength of cloth:Tongue method
KS M 3084-2003 TESTING METHOD FOR LZOD IMPACT STRENGTH OF GLASS FIBER REINFORCED PLASTICS
KS F 2403-2010 Standard test method of making and curing concrete specimens

ZA-SANS, Intensive Test 47

SANS 60793-1-47:2007 Optical fibres Part 1-47: Measurement methods and test procedures - Macrobending loss
SANS 60793-1-47:2009 Optical fibres Part 1-47: Measurement methods and test procedures - Macrobending loss
SANS 5865:1994 Concrete tests - The drilling, preparation, and testing for compressive strength of cores taken from hardened concrete
SANS 10034-2:2003 Rubber, vulcanized or thermoplastic - Determination of tear strength Part 2: Small (Delft) test pieces
SANS 5863:2006 Concrete tests - Compressive strength of hardened concrete
SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete

ECIA - Electronic Components Industry Association, Intensive Test 47

364-47-1988 TP-47 Conductor Unwrap Test Procedure for Solderless Wrapped Electrical Connectors
EIA-364-47A-2001 TP-47A Conductor Unwrap (Solderless Wrapped Connection) Test Procedure for Electrical Connectors (Revision of EIA-365-47)

International Electrotechnical Commission (IEC), Intensive Test 47

IEC 60793-1-47:2009 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
IEC 61300-2-47:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
IEC 60793-1-47:2001 Optical fibres - Part 1-47: Measurement methods and test procedures; Macrobending loss
IEC 60793-1-47:2006 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
IEC 60793-1-47:2017 RLV Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
IEC 60793-1-47:2017 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
IEC 61300-2-47:2010/COR1:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
IEC 61300-2-47:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
IEC 61300-2-47:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-47: Tests.Thermal shocks
IEC 61300-2-47:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
IEC 61249-2-47:2018 Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m-K) and defined flammabil

RU-GOST R, Intensive Test 47

GOST R IEC 60793-1-47-2014 Optical fibres. Part 1-47. Measurement methods and test procedures. Macrobending loss
GOST R 50359-1992 Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces)
GOST 17823.4-1980 Wood chemical products. Methods for determination of colour intensity

KR-KS, Intensive Test 47

KS C IEC 60793-1-47-2020 Optical fibres — Part 1-47: Measurement methods and test procedures — Macrobending loss
KS M ISO 9026-2022 Raw rubber or unvulcanized compounds Determination of green strength
KS K ISO 24338-2016 Laminate floor coverings－Determination of abrasion resistance
KS M ISO 4044-2017 Leather — Chemical tests — Preparation of chemical test samples

SE-SIS, Intensive Test 47

SIS SS 13 11 12-1983 Concrete testing - Test specimens - Making and curing of moulded test specimens for strength tests
SIS SS 13 72 12-1978 Concrete testing — Hardened concrete — Flexural strength
SIS SS 13 72 31-1983 Concrete testing - Hardened concrete - Tensile strength of test specimens
SIS SS 13 72 30-1983 Concrete testing - Hardened concrete - Compressive strength of est specimens
SIS SS 13 72 20-1984 Concrete testing — Hardened shotcrete — Compressive strength of shotcreted test specimens
SIS SS 13 72 10-1978 Concrete testing — Hardened concrete — Cube strength
SIS SS 13 72 11-1978 Concrete testing — Hardened concrete — Cylinder strength
SIS SS 13 72 18-1984 Concrete testing — Hardened concrete — Change in strength by vacuum treatment
SIS SS 13 75 33-1984 Concrete testing — Hardened mortar for injection — Compressive strength
SIS SS 13 75 33-1980 Concrete testing — Harde ned mortar for injection — Compressive strength
SIS SS 13 72 07-1988 Concrete testing - Hardened concrete - Compressive strength Conversion factors
SIS SS 13 72 07-1984 Concrete testing - Hardened concrete - Compressive strength - Conversion factors
SIS SS 13 72 50-1984 Concrete testing - Hardened concrete - Compressive strength rom rebound number
SIS SS 78 20 02-1979 Shipbuilding — Doors — Strength — Testing
SIS SS 13 72 33-1983 Concrete testing - Hardened concrete - Compressive strength after ccelerated curing for 24 hours
SIS SS 13 72 23-1980 Concrete testing — Hardened concrete — Compressive strength of test speci- mens cured together with a structure
SIS SS 13 42 33-1989 Methods of testing cement — Determination of strength
SIS SS 13 72 53-1984 Concrete testing — Hardened concrete — Compressive strength of drilled cores form structures
SIS SS 13 75 20-1981 Mortars — Testing — Compressive strength
SIS SS 13 72 43-1987 Concrete testing - Hardened concrete, shotcrete and plaster - Adhesion strength
SIS SS 78 08 26-1983 Shipbuilding - Toughened safety glass panes for ships' side scuttles and ships' rectangular Win- dows - Punch method of non-destruc- tive strength testing
SIS SS 18 71 75-1990 Peat — Determination of mechanical strength of sod peat

NL-NEN, Intensive Test 47

NEN 5988-1992 Concrete - Determination of compressive strength - Hardening test
NEN 5989-1992 Concrete - Determination of compressive strength - Hardening test with temperature regulation

Japanese Industrial Standards Committee (JISC), Intensive Test 47

JIS K 7131:1994 Testing method for thermally stimulated current of plastic films
JIS S 2402:2010 Rim impact testing method for strengthened porcelain tableware
JIS C 61300-2-47:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-47: Tests -- Thermal shocks
JIS P 8210:1994 Testing method for strength of paper pulp
JIS K 6252-2:2015 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
JIS K 6252:2001 Rubber, vulcanized or thermoplastics -- Determination of tear strength
JIS H 8687:2013 Anodizing of aluminium and its alloys.Determination of electric strength

NO-SN, Intensive Test 47

NS 3674-1987 Concrete testing - Hardened concrete - Tensile strength
NS 3675-1987 Concrete testing - Hardened concrete - Compressive strength after accelerated curing for 24 hours

HU-MSZT, Intensive Test 47

CENELEC - European Committee for Electrotechnical Standardization, Intensive Test 47

EN 60793-1-47:2002 Optical Fibres Part 1-47: Measurement Methods and Test Procedures - Macrobending Loss
EN 60793-1-47:2007 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
EN 61300-2-47:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
EN 61300-2-47:2004 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-47: Tests Thermal shocks

AT-OVE/ON, Intensive Test 47

OVE EN IEC 63284:2021 Semiconductor devices - Reliability test method by inductive load switching for gallium nitride transistors (IEC 47/2681/CDV) (english version)
OVE EN IEC 63275-2:2021 Semiconductor devices - Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors - Part 2: Test method for bipolar degradation due to body diode operation (IEC 47/2680/CDV) (english version)
OVE EN IEC 60749-37:2020 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV) (english version)
OVE EN IEC 63373:2021 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices (IEC 47/2690/CDV) (english version)

CEN - European Committee for Standardization, Intensive Test 47

PREN 12390-5-2017 Testing hardened concrete - Part 5: Flexural strength of test specimens
PREN 12390-3-2017 Testing hardened concrete - Part 3: Compressive strength of test specimens
PREN 12390-2-2017 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
PREN 12390-4-2018 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
PREN 1015-11-2017 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

Society of Automotive Engineers (SAE), Intensive Test 47

SAE J442-2001 Test Strip, Holder, and Gage for Shot Peening
SAE J442-2019 Test Strip, Holder, and Gage for Shot Peening
SAE J442-2020 Test Strip, Holder, and Gage for Shot Peening
SAE J374-2002 Vehicle Roof Strength Test Procedure
SAE TS374-1-1990 TS374 Test for Accessory Thread Strength

Professional Standard - Geology, Intensive Test 47

DZ/T 0064.47-2021 Analytical methods for groundwater quality - Part 47: Titrimetric method for the determination of free carbon dioxide

Occupational Health Standard of the People's Republic of China, Intensive Test 47

GBZ/T 300.47-2017 Determination of Toxic Substances in Workplace Air - Part 47: Arsenic and Its Inorganic Compounds

CZ-CSN, Intensive Test 47

CSN ISO 2736-2:1994 Concrete tests.Test specimens.Part 2:Making and curing of test specimens for strength test.
CSN 64 7032-1979 Testing of synthetic leather. Tear strength
CSN 72 2450-1968 Testing oí ílexure strength of mortar
CSN 50 0366-1962 Paper testing. Torsion strength
CSN 72 2449-1968 Testing of compressive strength of mortar
CSN 50 0344-1988 Board testing. ursting strength (Schopper-Dalen appa- atus)
CSN EN 196-1-1993 Methods of testing cement. Determination of strength
CSN 79 5612-1968
CSN 80 0700-1974 Testing of single thread tensile strer.gth
CSN 79 5611-1966
CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
CSN 42 0891 Cast.2-1986 Testing of sintered products. Tensile strength test
CSN 65 6211-1953
CSN 80 0353-1960 Felt testing
CSN 79 3823-1962 Testing of leather. Strength o? the grain side of leather. Key test

American Society for Testing and Materials (ASTM), Intensive Test 47

ASTM C900-06 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-99 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-01 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-12 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C900-15 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM D4166-99(2004)e1 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)
ASTM D6746-03 Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D4219-08 Standard Test Method for Unconfined Compressive Strength Index of Chemical-
Grouted Soils
ASTM D6746-02 Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D6746-02a Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7005/D7005M-16 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D6746-08 Standard Test Method for Determination of Green Strength of Raw Rubber or Unvulcanized Compounds
ASTM D6746-15(2020) Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM D2290-19 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D2290-16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D5202-91(1997) Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM F2345-21 Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
ASTM D4475-02(2008) Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM C918-97e1 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C918/C918M-20 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM D5202-02 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D5202-08 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM C307-23 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM D3846-94 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D3846-02 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D5884-04a(2010) Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D6636-01(2018) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Intensive Test 47

GJB 3196.47A-2005 Test methods of cartridge.Part 47:Loss rate of velocity and energy measurement for bullet in simulated target

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Intensive Test 47

GB/T 12829-1991 Rubber vulcanized--Determination of tear strength of small test pieces (Delft test pieces)
GB/T 12829-2006 Rubber, vulcanized or thermoplastic. Determination of tear strength of small test pieces (Delft test pieces)
GB/T 19975-2005 Test method of tensile properties for high tenacity filament yarn
GB/T 15972.47-2008 Specifications for optical fibre test methods.Part 47:Measurement methods and test procedures for transmission and optical characteristics.Macrobending loss
GB/T 15615-1995 Test method for measuring flexture strength of silicon slices
GB/T 43091-2023 Powder compressive strength test method
GB/T 2376-2003 Sulphur dyes-Determination of dyeing shade and relative strength
GB/T 21878-2008 Water-soluble sulphur dyes-Determination of spectrostrength
GB/T 2376-2013 Sulphur dyes.Determination of dyeing shade and relative strength

PT-IPQ, Intensive Test 47

NP 2915-1988 Rubber, vulcanized Determination of tensile stress-strain properties
NP 105-1957
NP ENV 1170-8-2000 Test method for glass-fibre reinforced cement Part 8:Cyclic weathering type test
NP 4100-1991 Textiles Colour fastness. Fastness test to degumming

AT-ON, Intensive Test 47

ONORM EN 62-1979 Glass reinforced plastics. Standard atmospheres for conditioning and testing.
OENORM EN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
ONORM A 1103 Teil.2-1981 Testing of paper and board;determination of bursting strength after Immersionin water according to Mullen
ONORM A 5482 Teil.2-1981 Packaging testing; Performance fest schedules for transport packages; Intensities of test
ONORM EN 60-1978 Glass reinforced plastics. Determination of the loss on ignition.
ONORM A 1114-1984 Testing of paper and board;determination of tensile strength

Taiwan Provincial Standard of the People's Republic of China, Intensive Test 47

CNS 3188-1976 Method of Test for Transverse Strength of Chemical Stoneware
CNS 13559-1995 Method of Test for Apprent Interlaminar Shear Strength of Carbon Fiber Reinforced Plastics
CNS 3187-1976 Method of Test for Compressive Strength of Chemical Stoneware
CNS 3559-1985 Methods of Test for Tear Resistance of Vulcanized Rubber
CNS 12782-1990 Method of Test for Apparent Interlaminal Shear Strength of Glass Fiber Reinforced Plastics
CNS 13556-1995 Method of Test for Flexural Properties of Carbon Fiber Reinforced Plastics
CNS 13555-1995 Method of Test for Tensile Properties of Carbon Fiber Reinforced Plastics
CNS 13558-1995 Method of Test for Comppressive Properties of Carbon Fiber Reinforced Plastic
CNS 7636-1981 Method of Test for Saturation Magnetization on Saturation Induction of Nonmetallic Magnetic Materials

未注明发布机构, Intensive Test 47

BS 1881-5:1970(1999) Methods of Testing concrete — Part 5 : Methods of testing hardened concrete for other than strength
BS 4550-3-4:1978(1999) Methods of testing cement — Part 3 : Physical tests — Section 3.4 Strength tests

PL-PKN, Intensive Test 47

PN-EN IEC 61631-2021-02 E Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020)
PN H04321-1986 Metalls Testing of shear strength
PN C04254-1986 Rubber, vulcanized Determination of tear strenght
PN B04116-1991 Stone materials. Determination of the flexural strength
PN E04410-20-1986 Electroinsulating varnishes Test methods Testing of electric strength
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
PN E04160 ArkusZ20-1973 Elec?ric cables Me?hods ot ?es?ing Determination ot tear strenght

Standard Association of Australia （SAA）, Intensive Test 47

AS 1141.22:2019 Methods for sampling and testing aggregates, Method 22: Wet/dry strength variation
AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
AS 4133.4.2.1:2022 Methods of testing rocks for engineering purposes, Method 4.2.1: Rock strength tests — Determination of uniaxial compressive strength — Rock strength greater than 50 MPa
AS/NZS 2512.5.1:1998 Methods of testing protective helmets - Determination of strength of retention system - Static strength
AS/NZS 2512.5.2:1998 Methods of testing protective helmets - Determination of strength of retention system - Dynamic strength

International Organization for Standardization (ISO), Intensive Test 47

ISO 816:1976 Title missing - Legacy paper document
ISO 816:1983 Rubber, vulcanized; Determination of tear strength of small test pieces (Delft test pieces)
ISO 9026:2007 Raw rubber or unvulcanized compounds - Determination of green strength
ISO 34-2:2011 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 34-2:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 34:1979 Rubber, vulcanized; Determination of tear strength (trouser, angle and crescent test pieces)
ISO 34-2:1996 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 9026:2021 Raw rubber or unvulcanized compounds — Determination of green strength
ISO 9026:1991 Raw rubber of unvulcanized compounds; determination of green strength
ISO 4647:2010 Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test
ISO 4647:1982 Rubber, vulcanized; Determination of static adhesion to textile cord; H-pull test
ISO 4647:2021 Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test
ISO 679:2009 Cement - Test methods - Determination of strength
ISO/R 36:1969 Determination of the adhesion strength of vulcanized rubbers to textile fabrics

Professional Standard - Automobile, Intensive Test 47

QC/T 732-2005 Accelerated corrosion testing method for passenger car
QC/T 61-1993 Intensified test method for motorcycle engine

国家市场监督管理总局、中国国家标准化管理委员会, Intensive Test 47

GB/T 15972.47-2021 Specifications for optical fibre test method—Part 47：Measurement methods and test procedures for transmission characteristics—Macrobending loss
GB/T 9966.15-2021 Test methods for natural stone—Part 15: Determination of resistance ageing by salt mist
GB/T 9966.11-2021 Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock

TR-TSE, Intensive Test 47

TS 3151-1978 VULCUNIZED RUBBERS - DETERMINATION OF TEAR STRENGTH OF SMALL PIECES (DELFT TEST PIECES)
TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength

National Aeronautics and Space Administration (NASA), Intensive Test 47

NASA NACA-RB-L4D29-1944 Some strength tests of stiffened curved sheets loaded in shear

Indonesia Standards, Intensive Test 47

SNI 06-4997-1999 Determination of tear strength of vulcanized rubber (Delft test pieces)
SNI 08-4648-1998 Test method for seam strength of knitted fabrics by bursting strength tester (diaphragm method )
SNI 12-0565-1989 Bending strength test of shoes
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
SNI ISO 4044:2013 Leather-Chemical tests-Preparation of chemical test samples

YU-JUS, Intensive Test 47

JUS D.E8.201-1979 Fumiture. Determinationofchar strength change
JUS G.C1.065-1990 Rubber. Raw rubbers or unvulcanise? rubber corr.pounds. Determination of strength ("green strength")
JUS U.M1.070-1998 Concrete, hardened - Determination of pull-out strength
JUS U.M8.022-1984 Test method for compnssive strength of grout

Electronic Components, Assemblies and Materials Association, Intensive Test 47

ECA SP 5167-2007 Test Procedures for Electrical Connectors and Sockets Proposed Reaffirmation of ANSI/EIA-364-19, 47, 68, and 104

Underwriters Laboratories (UL), Intensive Test 47

UL 1206 CRD-2018 UL Standard for Safety Electric Commercial Clothes-Washing Equipment - Section / Paragraph Reference: 35 & 47 Subject: Direct Current (DC) Electric Strength Test Potentials (Edition 4: April 22@ 2003)

Professional Standard - Electron, Intensive Test 47

SJ 20551-1995 Test methods for high ferequency interference field tester
SJ 2355.5-1983 Method of measurement for luminous intensity and half-intensity angle of light-emitting devices

FI-SFS, Intensive Test 47

NZ-SNZ, Intensive Test 47

NZS 3112.3:1986 Methods of Test for Concrete Other Than Strength (Incorporating Amendment No. 1: May 1986)

GM Europe, Intensive Test 47

GME GMI L-1C-1-1997 Roof Crush Resistance Test (English/German)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Intensive Test 47

IPC TM-650 5.8.3-1973 Peel Strength Test Pattern

Professional Standard - Traffic, Intensive Test 47

JT/T 832-2012 LED luminous intensity tester

ACI - American Concrete Institute, Intensive Test 47

ACI 214.1R-1981 Use of Accelerated Strength Testing
ACI SP-155-1995 Testing of Fiber Reinforced Concrete

RO-ASRO, Intensive Test 47

STAS 194/8-1969
STAS 11337/1-1989 POLYESTER RESINS REINFORCED WITH GLASS FIBRES General specifications for strength determination at chemical agents action
STAS SR 13304-1996 Grinders Grinding wheei quards Strength tests
STAS 5540/4-1986 TESTS OF BUTT WELOED .IOINTS Notch impact test
SR EN 196-1-1995 Methods of testing cement - Part 1: Determination of strength
STAS SR ISO 3379:1996 Leather - Determination of distension and strength of grain - Ball burst test
STAS 1275-1988 Tests of concretes TESTS OF HARDENED CONCRETE Determination of mechanical strengthes

VE-FONDONORMA, Intensive Test 47

CL-INN, Intensive Test 47

Professional Standard - Aviation, Intensive Test 47

HB 5220.47-2008 Methods for chemical analysis of superalloys. Part 47: Determination of lead content by carrier precipitation-xylenol orange photometric method
HB 5250-1993 Test method for shear strength of room temperature vulcanizing sealants

GOSTR, Intensive Test 47

GOST R 58336-2018 Anchor angular emphasis. Test methods

Professional Standard - Pharmaceutical Packaging, Intensive Test 47

YBB 0010(03)-2003 Determination of Peel Strength (Trial)
YBB 0012(03)-2003 Heat Seal Strength Determination Method (Trial)

BE-NBN, Intensive Test 47

NBN T 31-007-1987 Vulcanized rubbers - Determination of tear strength-Trouser, angle, crescent and Delft test pieces

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Intensive Test 47

GB/T 34520.7-2017 Test methods for continuous silicon carbide fiber—Part 7 ：High temperature strength retention rate

Professional Standard - Agriculture, Intensive Test 47

GB/T 529-1991 Determination of tear strength of vulcanized rubber (pants, rectangular and crescent specimens)

VN-TCVN, Intensive Test 47

TCVN 3121-11-2003 Mortar for masonry.Test methods.Part 11: Determination of flexural and compressive strength of hardened mortars

Group Standards of the People's Republic of China, Intensive Test 47

T/CQCAA 0001-2020 The Reliability Enhancement Testing Method of Smart Meters
T/CIE 144-2022
T/CSAE 69-2018 Accelerate corrosion test acceptance criteria for passenger vehicle

Professional Standard - Speciality, Intensive Test 47

ZB T24012-1990 Enhanced braking test method for mini trucks

工业和信息化部, Intensive Test 47

HG/T 6012-2022 Test method for strength of chemical fiber materials for rubber shoe uppers

Canadian General Standards Board （CGSB), Intensive Test 47

CAN/CGSB-4.2 NO.11.2-M89-1989 Textile Test Methods Bursting Strength - Ball Burst Test
CAN/CGSB-4.2 NO.11.1-1994 Textile test methods Bursting strength - Diaphragm pressure test

Professional Standard - Forestry, Intensive Test 47

LY/T 1256-1999 Determination of strong acid digesting elements in forest soil

IN-BIS, Intensive Test 47

IS 9013-1978

(U.S.) Ford Automotive Standards, Intensive Test 47

FORD FLTM BV 012-1-2000 TEST FOR LOCKING STRENGTH OF SEALERS
FORD FLTM BN 117-1-2001 DETERMINATION OF THE EFFECT OF FADEOMETER AGING ON TENSILE STRENGTH OF SEWING THREADS
FORD FLTM EU BN 017-2-2001 DETERMINATION OF TENSILE STRENGTH OF TRIM MATERIALS AFTER AGEING
FORD FLTM EU BN 017-1-2001 DETERMINATION OF THE CHANGE IN TENSILE STRENGTH OF SEWING THREADS AND SEAT BELTS AFTER AGEING

GM Daewoo, Intensive Test 47

GMKOREA EDS-T-4529-2011 Test Procedure of Headrest Separation Strength

AASHTO - American Association of State Highway and Transportation Officials, Intensive Test 47

T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)

GB-REG, Intensive Test 47

REG 46 CFR PART 16-2011 Chemical Testing

American Society of Mechanical Engineers (ASME), Intensive Test 47

ASME B31J-ES (SPANISH)-2008 Método de prueba estándar para determinar factores de intensificación de esfuerzo (Factores i) para componentes de tuberías metálicas

ES-AENOR, Intensive Test 47

UNE 53-269-1990