ZH
RU
ES

Barium to titanium ratio test method

Barium to titanium ratio test method, Total:500 items.

In the international standard classification, Barium to titanium ratio test method involves: Non-ferrous metals, Ceramics, Metalliferous minerals, Paint ingredients, Analytical chemistry, Air quality, Inorganic chemicals, Ferrous metals, Earthworks. Excavations. Foundation construction. Underground works, Spices and condiments. Food additives, Nuclear energy engineering, Products of non-ferrous metals, Paper and board, Sensory analysis, Plastics, Cutting tools, Water quality, Petroleum products in general, Optics and optical measurements, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Construction materials, Environmental protection, Fuels, Refractories, Road vehicles in general, Road engineering, Soil quality. Pedology, Pesticides and other agrochemicals, Paints and varnishes, Power stations in general, Materials for aerospace construction, Radiation measurements, Waxes, bituminous materials and other petroleum products, Testing of metals, Products of the chemical industry, Integrated circuits. Microelectronics, Measurement of volume, mass, density, viscosity, Ferroalloys, Glass, Electronic tubes, Organic chemicals, Quality, Piezoelectric and dielectric devices, Electromechanical components for electronic and telecommunications equipment, Metrology and measurement in general, Sports equipment and facilities, Audio, video and audiovisual engineering, Thermodynamics and temperature measurements, Dentistry, Equipment for the chemical industry, Solar energy engineering, Particle size analysis. Sieving, Raw materials for rubber and plastics, Non-metalliferous minerals, Aerospace electric equipment and systems, Rubber and plastics products, Crude petroleum, Sugar. Sugar products. Starch, Powder metallurgy, Medical equipment, Optoelectronics. Laser equipment, Telecommunication systems, Footwear.

Korean Agency for Technology and Standards (KATS), Barium to titanium ratio test method

KS L 3417-2015(2020) Test method for determination of lead and cadmium content in barium titanate powders
KS D 0079-2010 Differential pressure testing method of titanium welded tubes
KS M 7080-2008 TESTING METHOD FOR TITANIUM PIGMENT IN PAPER
KS D 0079-2010(2020) Differential pressure testing method of titanium welded tubes
KS F 2320-2000 Testing method for the california bearing ratio of soils
KS L 6516-2003(2013)
KS F 2320-1995 Testing method for the California Bearing Ratio of soils
KS D ISO 6827-2001(2016) Aluminium and aluminium alloys－Determination of titanium content －Diantipyrylmethane photometric method
KS L 5110-2001(2016) Testing method for specific gravity of hydraulic cement
KS B 6509-1991(2011) Test Methods for Electro-hydraulic Proportional Metering Valves
KS M 3821-2008(2018) Testing methods for specific gravity of epoxide resins and hardeners
KS E ISO 7723-2011(2016) Manganese ores and concentrates－Determination of titanium content－4,4'-Diantipyrylmethane spectrometric method
KS L 3304-2012(2017) Testing method for specific gravity and true porosity of insulating fire bricks
KS M 1033-2017 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
KS L 3304-1964 Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-1987 Testing method for specific gravity and true porosity of insulating fire bricks
KS M 0104-1991
KS F 2320-2020 Standard test method for the California Bearing Ratio of soils
KS B 6510-1991(2016) Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS M ISO 900-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method
KS M 1915-2002(2007) Phthalic anhydride for industrial use－Methods of test－Determination of 1,4-naphthaquinone content－Colorimetric method
KS B 0533-2005 Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS F 2433-2018 Standard test method for bleeding and expansion ratios of grouting mortar
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS B 6511-1991(2011) Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
KS L 3114-1995 Testing method for apparent prosity,water absorption and specific gravity of fire beicks

YU-JUS, Barium to titanium ratio test method

JUS H.G8.086-1983 Reagents. Sodium chloride. Detormination ofbarium content. Turbidimetric method
JUS H.G8.108-1984 Reagents. Potassium chloride. Determination of barium content. Turbidimetric rnethod
JUS H.G8.263-1987 Reagents. Barium chloride dihydrate. Determination of iron content. Colorimetric method
JUS H.G8.261-1987 Reagents. Barium chloride dihydrate. Determination of total nitrogen content. Colorimetric method
JUS H.G8.388-1989 Reagents. Calciur. nitrate tetrahydrate. Deternination of bariun content. Turbidinetric nethod
JUS H.G8.262-1987 Reagents. Barium chlorlde dihydrate. Determination od heavy metals content (as Pb). Colorimetric method
JUS C.A1.275-1981 Method for chemical analysis of alummium and alummium alloys. Determination of titanium. Diantipyrilmethane photometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Barium to titanium ratio test method

GB/T 9506.2-1988 Test method for barium yield of barium flash getter
GB/T 4102.6-1983 Methods for chemical analysis of high-titanium slag and rutile--The barium sulfate gravimetric method for the determination of sulfur content
GB/T 9506.6-1988 Test method for barium film distribution of nitrogen-doped getter
GB/T 16026-1995 Workplace air--Determination of sulfuric acid and sulfur trioxide--Barium chloride turbidimetric method
GB/T 13025.12-2012 General test method in salt industry.Determination of barium
GB/T 9506.7-1988 Test method for gettering properties of barium flash getter
GB/T 13025.12-1994 General test method in salf industry-Determination of barium ion
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 4698.1-1996 Sponge titanium, titanium and titanium alloys--Determination of copper content--Diethyldithiocarbamate spectrophotometric method
GB/T 223.17-1989 Methods for chemical analysis of iron,steel and alloy--The diantipyrylmethane photometric method for the determination of titanium content
GB 223.17-1989 Methods for chemical analysis of iron, steel and alloys Diantipyrine methane spectrophotometric method for determination of titanium content
GB/T 613-2007 Chemical reagent.General method for the determination of specific optical rotatory power(specific optical rotation)
GB/T 3257.6-1999 Methods for chemical analysis of bauxite--Determination of titanium dioxide content--Diantipyrylmethane photometric method
GB/T 13747.19-1992 Zirconium and zirconium alloys--Determination of titanium content--Diantipyrylmethane spectrophotometric method
GB/T 613-1988 Chemical reagent--General method for the determination of specific optical rotation
GB/T 4324.19-2012 Methods for chemical analysis of tungsten.Part 19:Determination of titanium content.The diantipyrylmethane photometric spectrophtometry
GB/T 4698.7-1996 Sponge titanium, titanium and titanium alloys--Determination of nitrogen content--Distillation--Nessler reagent spectrophotometric method
GB/T 4701.3-1984 Methods for chemical analysis of ferrotitanium--The DDTC photometric method for the determination of copper content
GB/T 6901.7-1986 Silica refractories--Determination of titanium dioxide content--Diantipyryl methane photometric method
GB/T 13748.19-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of titanium content.Diantipyrylmethane spectrophotometric method
GB 7962.23-1987 Colourless optical glass test methods－Young's modulus, torsional rigidity modulus, Poisson's ratio
GB/T 7962.23-1987 Colourless optical glass test methods--Young's modulus torsional rigidity modulus Poisson's ratio
GB/T 11311-1989 Test methods for the properties of piezoelectric ceramics test for poisson's Ratio σ**E
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer
GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio
GB/T 6901.7-2004 Chemical analysis of silica refractories-Part 7:Determination of titanium dioxide-Diantipyrylmethane photometric method
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB/T 18932.11-2002 Method for the determination of potassium,phosphorus,iron,calcium,zinc,aluminium,sodium,magnesium,boron,manganese,copper,barium,titanium,vanadium,nickel,cobalt,chromium contents in honey--Inductively coupled plasma atomic emission spectrometric method
GB/T 5070.5-2002 Chemical analysis of magnesia chromite refractories--Part 5: Determination of titanium dioxide--Diantipylmethane photometric method
GB/T 16913.10-1997 Methods of dust character test--Part 10: Determination of electrical resistivity--Disk method
GB/T 5069.8-2001 Chemical analysis of magnesia and magnesia-alumina refractory materials--Diantipyrylmethane photometric method for determination of titanium dioxide content

British Standards Institution (BSI), Barium to titanium ratio test method

BS EN 725-2:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of impurities in barium titanate
BS EN ISO 3262-2:2023 Extenders. Specifications and methods of test. Baryte (natural barium sulfate)
BS EN ISO 5495:2005+A1:2016 Sensory analysis. Methodology. Paired comparison test
BS EN 2003-009:2007 Aerospace series - Test methods - Titanium and titanium alloys - Determination of surface contamination
BS EN 2003-010:2007 Aerospace series - Titanium and titanium alloys - Test methods - Sampling for determination of hydrogen content
BS 4140-6:1980 Methods of test for aluminium oxide - Determination of titanium content
BS EN ISO 18861:2021 Cosmetics. Sun protection test methods. Percentage of water resistance
BS EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
BS EN 3976:2006 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
BS 3483-C8:1980 Methods for testing pigments for paints - Comparison of heat stability
BS 3900-B8:1986 Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' barium content
BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS EN ISO 787-10:1995 General methods of test for pigments and extenders. Determination of density. Pyknometer method
BS EN ISO 148-1:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Test method
22/30454523 DC BS EN ISO 3262-2. Extenders. Specifications and methods of test. Part 2. Barytes (natural barium sulfate)
BS EN 3475-705:2005 Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
BS EN 3475-705:2006 Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
BS 2000-12:1993 Methods of test for petroleum and its products - Determination of specific energy
BS EN ISO 787-1:2017 General methods of test for pigments and extenders. Comparison of colour of pigments
BS 1881-130:2013 Testing concrete.Part 130:Method for temperature-matched curing of concrete specimens

Professional Standard - Non-ferrous Metal, Barium to titanium ratio test method

YS/T 514.6-2006 High titanium slag, rutile chemical analysis method barium sulfate gravimetric method for determination of sulfur content

American Society for Testing and Materials (ASTM), Barium to titanium ratio test method

ASTM D3926-05(2011) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM D3720-90(2005) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D3720-90(1999) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D3720-90(2011) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D3720-90(2019) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D715-86(1999) Standard Test Methods for Analysis of Barium Sulfate Pigment
ASTM D715-86(2020) Standard Test Methods for Analysis of Barium Sulfate Pigment
ASTM D153-84(2003) Standard Test Methods for Specific Gravity of Pigments
ASTM D3926-80(1999) Standard Test Method for Percent Solids in Titanium Dioxide Slurries
ASTM D3926-05 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM E1938-13 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
ASTM E1938-08 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry
ASTM D153-84(1996)e1 Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2008) Standard Test Methods for Specific Gravity of Pigments
ASTM D153-84(2020) Standard Test Methods for Specific Gravity of Pigments
ASTM E1938-97 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E1938-02 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM D4382-18 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
ASTM D156-02 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
ASTM E1066-95(2006) Standard Test Method for Ammonia Colorimetric Leak Testing
ASTM D1072-06 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM E120-00 Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
ASTM D3651-11 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D1072-23 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM E1945-98 Standard Test Method for Percent Dispersibility
ASTM E1673-96 Standard Test Method for Percent Suspensibility
ASTM E1673-96(2006) Standard Test Method for Percent Suspensibility
ASTM D5965-02 Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5965-96 Standard Test Methods for Specific Gravity of Coating Powders
ASTM E1673-96(2001) Standard Test Method for Percent Suspensibility
ASTM E1945-02(2008) Standard Test Method for Percent Dispersibility
ASTM E1945-02 Standard Test Method for Percent Dispersibility
ASTM E1673-96(2017) Standard Test Method for Percent Suspensibility
ASTM E1945-02(2016) Standard Test Method for Percent Dispersibility
ASTM D5965-02(2013) Standard Test Methods for Specific Gravity of Coating Powders
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM E393-19 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D1665-98 Standard Test Method for Engler Specific Viscosity of Tar Products
ASTM D1665-98(2003) Standard Test Method for Engler Specific Viscosity of Tar Products
ASTM E1447-09 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E878-01 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
ASTM E878-96 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
ASTM E878-01(2005) Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
ASTM E878-11 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
ASTM D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D1072-90(1999) Standard Test Method for Total Sulfur in Fuel Gases
ASTM D1072-06(2017) Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D854-00 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-00e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-02 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D4892-14 Standard Test Method for Density of Solid Pitch 40;Helium Pycnometer Method41;
ASTM D1394-76(1999) Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM D1394-76(2020) Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM E1447-05 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM D7126-15 Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D7126-10 Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D5355-95(2006) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95(2001) Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM D5355-95 Standard Test Method for Specific Gravity of Oils and Liquid Fats
ASTM C97-02 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM D6790/D6790M-16 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM C97/C97M-15 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM E1447-09(2016) Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D1072-06(2012) Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM E1447-04 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM E2371-04 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
ASTM D4319-93 Standard Test Method for Distribution Ratios by the Short-Term Batch Method
ASTM D5188-04 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-04a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D431-84 Standard test method for determination of distribution ratio by short-term batch method
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D5386-05 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM E1409-97 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E1409-13(2021) Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E140-12a Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM C729-75(1995)e1 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM C729-75(2000) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM F1570-94 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
ASTM D6790-02(2007) Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM F1570-01 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
ASTM D6790/D6790M-14 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM D1665-20 Standard Test Method for Engler Specific Viscosity of Tar Products
ASTM C729-11(2016) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D5386-93b(2000)e1 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D5386-16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D3348-98 Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)
ASTM D3348-98(2003)e1 Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)
ASTM E2466-06(2011) Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology
ASTM D5080-00 Standard Test Method for Rapid Determination of Percent Compaction
ASTM F1880-98(2004) Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM F1880-98 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM F1880-98e1 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM F1880-09 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM F1763-96 Standard Test Methods for Measuring Contrast of a Linear Polarizer
ASTM D7126-15(2023) Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D5080-08 Standard Test Method for Rapid Determination of Percent Compaction
ASTM E1409-05 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E1409-04 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E1409-08 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E1937-97 Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E393-96 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM E393-96(2002) Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM E393-08 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM D5188-99 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-09 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D4578-06(2012) Standard Test Methods for Rubber Chemicalsmdash;Determination of Percent Sulfur by Extraction
ASTM D4319-93(2001) Standard Test Method for Distribution Ratios by the Short-Term Batch Method (Withdrawn 2007)
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D3450-00(2010) Standard Test Method for Washability Properties of Interior Architectural Coatings
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM E1409-13 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM F1880-09(2013) Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM D2508-93 Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
ASTM F2004-05 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM F2004-03 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5188-13 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-10a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-10 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM E2371-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2371-21a Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM B923-10 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E526-97 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM E526-97(2002) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM E526-22 Standard Test Method for Measuring Fast-Neutron Reaction Rates By Radioactivation of Titanium
ASTM D3926-05(2019) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM E1937-04 Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique (Withdrawn 2005)
ASTM D4312-95a(2005) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
ASTM D5188-16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
ASTM D6790-02 Standard Test Method for Determining Poisson''s Ratio of Honeycomb Cores
ASTM D6935-11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
ASTM D6790/D6790M-22 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM F1833-97(2017) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM E393-13 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters

Indonesia Standards, Barium to titanium ratio test method

SNI 06-2563-1992 Technical grade barium chloride, Specification and test method
SNI 07-3118-1992 Test method for determination of titan content of steels by spectrophotometric methods
SNI 1964-2008 Testing method for specific grafity of soils
SNI 06-6446.1-2000 Test method for specific gravity of epoxide resins and hardeners
SNI 06-6856-2002 Test methods of nitrate content in water by using of colorimetry with Nessler reagent
SNI 06-6893-2002 Test methods of maximum specicific gravity of bituminous paving mixtures
SNI 6423-2008 Testing methods for choke potential of soil-geotextile system by gradient ratio
SNI 7619-2012 Metode uji penentuan persentase butir pecah pada agregat kasar
SNI 06-6854-2002 Test methods of iron (Fe) content in water by colorimetry with thiocyanate reagent
SNI 06-6855-2002 Test methods of manganese (Mn) content in water by colorimetry with persulphate reagent
SNI 07-6734-2002 Test methods for plastic straint, ratio r for sheet metals

European Committee for Standardization (CEN), Barium to titanium ratio test method

EN 725-2:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
DD ENV 725-2-1994 Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 2: Determination of Impurities in Barium Titanate
EN 3976:2006 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
EN 2003-009:2007 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination
EN ISO 3262-2:2023 Extenders - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:2023)
prEN ISO 18861:2021 Cosmetics - Sun protection test methods - Percentage of water resistance (ISO 18861:2020)
EN 2003-010:2007 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content
EN ISO 18861:2021 Cosmetics - Sun protection test methods - Percentage of water resistance (ISO 18861:2020)
prEN ISO 3262-2 Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO/DIS 3262-2:2022)
EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods

Association Francaise de Normalisation, Barium to titanium ratio test method

NF B42-001-2*NF EN 725-2:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2 : determination of impurities in barium titanate.
NF EN ISO 5495/A1:2016 Analyse sensorielle - Méthodologie - Essai de comparaison par paires
NF EN ISO 5495:2007 Analyse sensorielle - Méthodologie - Essai de comparaison par paires
NF EN ISO 18861:2021 Cosmétiques - Méthodes d'essai de protection solaire - Pourcentage de résistance à l'eau
NF EN ISO 3262-2:1998 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 2 : barytine (sulfate de baryum naturel).
NF EN 3976:2007 Série aérospatiale - Titane et alliages de titane - Méthode d'essai - Analyse chimique pour détermination de la teneur en hydrogène
NF L10-808*NF EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
NF EN 2003-009:2007 Série aérospatiale - Méthodes d'essais - Titane et alliages de titane - Partie 009 : détermination de la contamination de surface
NF EN 12130:2018 Plumes et duvets - Méthodes d'essais - Détermination du pouvoir gonflant (volume massique)
NF L10-802-009*NF EN 2003-009:2007 Aerospace series - Tests methods - Titanium and titanium alloys - Part 009 : determination of surface contamination
NF EN 2003-010:2007 Série aérospatiale - Méthodes d'essais - Titane et alliages de titane - Partie 010 : échantillonnage pour la détermination de la teneur en hydrogène
NF L10-802-010*NF EN 2003-010:2007 Aerospace series - Test methods - Titanium and titanium alloys - Part 010 : sampling for determination of hydrogen content.
NF EN ISO 591-1:2000 Pigments de dioxyde de titane pour peintures - Partie 1 : spécifications et méthodes d'essai

Danish Standards Foundation, Barium to titanium ratio test method

DS/ENV 725-2:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate
DS/EN 725-2:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
DS/ISO 18861:2021 Cosmetics – Sun protection test methods – Percentage of water resistance
DS/EN ISO 3262-2:1999 Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural Barium sulphate)
DS/CEN/CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete
DS/EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
DS/EN 2003-009:2007 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination
DS/EN 2003-010:2007 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content
DS/EN ISO 591-1:2001 Titanium dioxide pigments for paints - Part 1: Specifications and methods of test

Lithuanian Standards Office , Barium to titanium ratio test method

LST EN 725-2-2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
LST EN 3976-2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
LST EN 2003-009-2007 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination
LST EN 2003-010-2007 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content
LST EN ISO 3262-2:2002 Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998)

German Institute for Standardization, Barium to titanium ratio test method

DIN EN 725-2:2008 Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate; English version of DIN EN 725-2:2008-01
DIN 10954:1997 Sensory testing methods - Paired comparison test
DIN EN ISO 5495:2016-10 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 + Cor 1:2006 + Amd 1:2016); German version EN ISO 5495:2007 + A1:2016
DIN EN ISO 3262-2:2022-10 Extenders - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO/DIS 3262-2:2022); German and English version prEN ISO 3262-2:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-2 (1998-09).
DIN EN ISO 18861:2022-02 Cosmetics - Sun protection test methods - Percentage of water resistance (ISO 18861:2020); German version EN ISO 18861:2021
DIN EN ISO 3262-2:1998-09 Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 / Note: To be replaced by DIN EN ISO 3262-2 (2022-10).
DIN EN 3976:2007-04 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content; German and English version EN 3976:2006
DIN EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content; German and English version EN 3976:2006
DIN EN 2003-009:2007-07 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007
DIN EN 2003-009:2007 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007
DIN EN 2003-010:2007 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content; German and English version EN 2003-010:2007
DIN EN 2003-010:2007-07 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content; German and English version EN 2003-010:2007
DIN EN ISO 591-1:2001-08 Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO 591-1:2000); German version EN ISO 591-1:2000
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods

ES-AENOR, Barium to titanium ratio test method

UNE 80-228-1988

AT-ON, Barium to titanium ratio test method

ONORM ENV 725-2-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate
OENORM EN ISO 18861:2021 Cosmetics - Sun protection test methods - Percentage of water resistance (ISO 18861:2020)

Professional Standard - Aviation, Barium to titanium ratio test method

HB 7064.4-1994 Metal heat treatment salt bath chemical analysis method barium sulfate turbidimetric method for determination of sulfate radical content
HB 5218.8-1995 Aluminum Alloy Chemical Analysis Method Diantipyrine Methane Spectrophotometric Determination of Titanium Content
HB 5422.30-1989 Methods for chemical analysis of copper alloys - Determination of titanium content by diantipyrine methane absorptiometry
HB 5220.18-1995 Method for chemical analysis of superalloys Diantipyridine methane absorptiometry for determination of titanium content
HB/Z 5218.8-2004 Methods for chemical analysis of aluminium alloys-Part 8:Determination of titanium content by diantipyryl methane spectrophotometric method
HB 5220.18-2008 Methods for chemical analysis of superalloys. Part 18: Determination of titanium content by diantipyryl methane photometric method
HB 5297.11-2001 Titanium alloy chemical analysis method copper reagent spectrophotometric determination of copper content

Professional Standard - Nuclear Industry, Barium to titanium ratio test method

EJ/T 1231.3-2008 Test method for analysis of impurity in diuranate.Part3: Determination of sulphate by barium sulfate turbidimetry

IT-UNI, Barium to titanium ratio test method

UNI 3714-1956
UNI 2960-1949 Procedures for chemical analysis of metallic materials. Determination of titanium content of steels and cast irons. Photometric and colorimetric cupferron method (absence of tungsten, tantalum and niobium).
UNI 3658-1955 Procedures for chemical analysis of minerals. Determination of titanium in iron ore. Photometric and colorimetric methods for disaggregation with sodium peroxide.
UNI 3892-1957 Procedures for the chemical analysis of minerals. Determination of the titanium oxide content in titanium minerals. Cupferron gravimetric method.

SA-SASO, Barium to titanium ratio test method

SASO SSA 258-1981 METHODS OF TEST FOR GASOLINE-DETERMINATION OF VAPOUR-LIQUID RATIO

International Federation of Trucks and Engines, Barium to titanium ratio test method

NAVISTAR TMS 9530-2001 Brake Proportioning System, Test Method

Japanese Industrial Standards Committee (JISC), Barium to titanium ratio test method

JIS K 7123:1987 Testing methods for specific heat capacity of plastics
JIS H 0511:1990 Testing methods for brinell hardness of titanium sponge
JIS R 6125:1995 Testing method for specific gravity of artificial abrasives
JIS M 8219-2:2012 Iron ores -- Determination of titanium -- Part 2: Diantipyrylmethane spectrophotometric method
JIS K 7232:1986 Testing methods for specific gravity of epoxide resins and hardeners
JIS K 3834:1990 Testing methods for specific resistivity recovery characteristic of water filtered by membranes
JIS K 3822:1990 Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules

The American Road & Transportation Builders Association, Barium to titanium ratio test method

AASHTO T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 100-2014 Standard Method of Test for Specific Gravity of Soils
AASHTO T 100-2015 Standard Method of Test for Specific Gravity of Soils
AASHTO T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 193-2010 Standard Method of Test for The California Bearing Ratio
AASHTO T 193-2013 Standard Method of Test for The California Bearing Ratio
AASHTO T 193-2017 Standard Method of Test for The California Bearing Ratio
AASHTO T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 85-2008 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method

AASHTO - American Association of State Highway and Transportation Officials, Barium to titanium ratio test method

T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 100-2014 Standard Method of Test for Specific Gravity of Soils
T 100-2006 Standard Method of Test for Specific Gravity of Soils
T 295-1992 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (ASTM D3142-84 (R 1989))
T 295-1997 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (Nineteenth Edition; ASTM D3142-84(89); Revised Per Interim Specifications - Tests and Methods - 1999)
T100-1993 Standard Method of Test for Specific Gravity of Soils (ASTM D854-83)
T 193-2013 Standard Method of Test for The California Bearing Ratio
T 193-2010 Standard Method of Test for The California Bearing Ratio
T 84-2009 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2000 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2008 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
T 228-2006 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials
T 100-2003 Standard Method of Test for Specific Gravity of Soils (ASTM Designation: D 854-00)
T 295-2002 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method (HM-22; Part IIA; ASTM Designation D 3142-97)
T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 61-2002 Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate
T 335-2009 Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate
T 84-1994 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (ASTM C128-88)

TR-TSE, Barium to titanium ratio test method

TS 116-1964 STANDARD METHODS OF THE TEST FOR SPECIFIC GRAV1TY OF CREOSOTE
TS 3527-1980 TEST METHOD FOB DETERMINING THE PROPORTION OF FINE MATERIALS IN AGGREGATES FOR CONCRETE
TS 3526-1980 TEST METHOD FOR SPECIFIC GRAVITY AND WATER ABSORBSION OF AGGREGATES FOR CONCRETE

Military Standard of the People's Republic of China-General Armament Department, Barium to titanium ratio test method

GJB 772.106-1989 Explosives test method Poisson's ratio determination
GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
GJB 772.309-1993 Test Methods for Explosives Specific Heat Capacity Determination Microcaloric Calorimetry
GJB 6636-2008 Measurement method for underwater echo feature of naval vessel scale models
GJB 1715-1993 Test method for medium temperature specific heat capacity of fibrous and powdery materials
GJB 737.8-1993 Test methods for pyrotechnics. Determination of specific heat capacity. Microcalorimetric method.
GJB 8807-2015 Indoor field scaled target radar scattering cross section test method
GJB 5022-2001 Indoor field scaled target radar scattering cross section test method
GJB 2078-1994 2048kbit/s series bit rate digital interface parameter test method
GJB 330-1987 Test method for average specific heat capacity of solid materials from room temperature to 800°C
GJB 737.9-1993 Test method for pyrotechnics agent Gas specific volume determination Pressure sensor method
GJB 770.308-1990 Test methods for gunpowder analysis Determination of nitrogen content of nitrocellulose Ferrous iron-titanium chloride method
GJB 6637-2008 The quasi-dynamic measurements method for electromagnetic scattering of scale target in near field
GJB 4471-2002 VHF/UHF band transmitter intermodulation suppression ratio requirements and test methods
GJB 2502.2-2015 Test methods for spacecraft thermal control coatings Part 2: Solar absorption ratio test

工业和信息化部, Barium to titanium ratio test method

YS/T 1147-2016 Tensile testing method for superelastic nickel-titanium alloys
YS/T 1368-2020 Testing method for interface hardness of titanium-steel explosive composite plates
YS/T 1307.1-2019 Test methods for memory properties of nickel-titanium shape memory alloys Part 1: Tensile test methods
YS/T 1307.2-2019 Nickel titanium shape memory alloy memory performance test method Part 2: Bending test method
YS/T 1445.5-2021 Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 5: Determination of sulfate ion content Barium sulfate turbidimetric method
SJ/T 10805-2018 Semiconductor integrated circuit voltage comparator test method
JC/T 2513-2019 Test method for anti-grey stain performance of potassium titanyl phosphate single crystal components

International Organization for Standardization (ISO), Barium to titanium ratio test method

ISO 11433:2020 Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption method
ISO 3262-2:2023 Extenders — Specifications and methods of test — Part 2: Baryte (natural barium sulfate)
ISO 18861:2020 Cosmetics — Sun protection test methods — Percentage of water resistance

Professional Standard - Machinery, Barium to titanium ratio test method

JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory

PL-PKN, Barium to titanium ratio test method

PN BN 7469-03-1965 Printing inks Methods of testing Determination of specific density
PN C89085-03-1987 Epoxy resins Methods of testing Determination of density (specific gravity)
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method
PN C04404-11-1988 Pigments for paints General methods of test Determination of the specific surface area and texture
PN C89082-03-1986 Unsaturated polyester resins Methods of testing Determination of density (specific gravity)

Professional Standard - Aerospace, Barium to titanium ratio test method

QJ 2455-1993 PO7B/SS3501 frequency standard comparison system test method
QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
QJ/Z 32-1977 Testing methods for semi-conductor integrated comparison amplifiers
QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°

ES-UNE, Barium to titanium ratio test method

UNE-EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) (Endorsed by Asociación Española de Normalización in February of 2018.)
UNE-EN ISO 5495:2007/A1:2016 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016) (Endorsed by Asociación Española de Normalización in September of 2017.)
UNE-EN ISO 18861:2022 Cosmetics - Sun protection test methods - Percentage of water resistance (ISO 18861:2020)
UNE-EN 2003-009:2007 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination (Endorsed by AENOR in May of 2007.)
UNE-EN 3976:2006 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content (Endorsed by AENOR in March of 2007.)
UNE-EN 2003-010:2007 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content (Endorsed by AENOR in May of 2007.)

Professional Standard - Electricity, Barium to titanium ratio test method

DL/T 1287-2013 Determination of electrical resistivity of coal ash in laboratory

Professional Standard - Post and Telecommunication, Barium to titanium ratio test method

YD/T 1141-2001 Testing Specification for Giga Bit Ethernet LAN Switch
YD/T 1995-2009 Test method for access network equipment Gigabit-capable Passive Optical Network (GPON)

Professional Standard - Electron, Barium to titanium ratio test method

SJ 20842-2002 Test method for Ga/As ratio of surface of gallium arsenide
SJ 1714-1981 Measurement of intermodulation distortion ration of power klystrons
SJ 368-1973 Measurement of power ripple ratio of reflex klystrons
SJ 438-1973 Method of measurement for spurious oscillations signal-to-noise ratio of O-type backwave tubes
SJ 2215.10-1982 Method of measurement for direct current transfer ratio of semiconductor photocouplers
SJ/T 10938-1996 Methods of measurement for light transmissivity (τ546) for color picture tube glass panel

Professional Standard - Commodity Inspection, Barium to titanium ratio test method

SN/T 0253-1993 Method for determination of proportion ofcotton ramie interweave fabric for export

未注明发布机构, Barium to titanium ratio test method

BS EN ISO 5495:2007+A1:2016 Sensory analysis — Methodology — Paired comparison test
GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
BS EN ISO 3262-2:1998(1999) Extenders for paints Specifications and methods of test — Part 2 : Barytes (natural barium sulfate)

CZ-CSN, Barium to titanium ratio test method

CSN 72 5011-1979 Testing of ceramic electrotechnic materials. Methods of the deter- mination of the specific gravity

Professional Standard - Ferrous Metallurgy, Barium to titanium ratio test method

YB 4004-1991 High-quality magnesia chemical analysis method diantipyrine methane spectrophotometric determination of titanium dioxide content
YB/T 4004-1991 High-quality magnesia chemical analysis method diantipyrine methane spectrophotometric determination of titanium dioxide content
YB/T 145-1998 Steel tubes.Measurement method of standard artificial defect for flaw detection
YB/T 145-2013 Die casting and size measurement method of artificial defects on the reference sample pipes

VN-TCVN, Barium to titanium ratio test method

TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)

American National Standards Institute （ANSI), Barium to titanium ratio test method

ANSI/ASTM D369:1996 Test Method for Specific Gravity of Creosote Fractions and Residues
ANSI/ASTM D368:1996 Test Method for Specific Gravity of Creosote and Oil-Type Preservatives
ANSI/ASTM F1880:2009 Test Method for the Determination of Percent of Let-Off for Archery Bows
ANSI/ASTM D4669:1998 Polyurethane Raw Materials, Determination of Specific Gravity of Polyols, Method for Testing (08.03)
ANSI/ASTM D4659:1998 Polyurethane-Isocyanate Raw Materials, Determination of Specific Gravity, Method for Testing (11.01)

Society of Automotive Engineers (SAE), Barium to titanium ratio test method

SAE ARP1974-2007 Clamps, Support, Comparative Fatigue Strengths, Test Method
SAE AS1974-2013 Clamps, Support, Comparative Fatigue Strengths, Test Method

SAE - SAE International, Barium to titanium ratio test method

SAE AS1974-2003 Clamps@ Support@ Comparative Fatigue Strengths@ Test Method
SAE ARP1974A-2008 Clamps@ Support@ Comparative Fatigue Strengths@ Test Method

Standard Association of Australia （SAA）, Barium to titanium ratio test method

AS 1580.202.3:2005 Paints and related materials - Methods of test - Determination of specific gravity of liquids by hydrometer
AS/NZS 1301.452rp:2006 Methods of test for pulp and paper - Determination of weight factors by the comparison method
AS 1141.30.1:2022 Methods for sampling and testing aggregates, Method 30.1: Coarse aggregate quality by visual comparison
AS 1141.30.1:2009
AS 1141.14:1995 Methods for sampling and testing aggregates Method 14: Particle shape, by proportional calliper
AS/NZS 1301.426S:2015 Methods of test for pulp and paper, Method 426S: Paper and board — Determination of thickness, density and specific volume
AS 1141.30:1996 Methods for sampling and testing of aggregates - Coarse aggregate quality by visual comparison

Professional Standard - Agriculture, Barium to titanium ratio test method

GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents

CU-NC, Barium to titanium ratio test method

NC 20-06-23-1987 Medical Sciences. Determination of Blood Erythrocyte Sedimentation Ratio. Testinq Method

IN-BIS, Barium to titanium ratio test method

RU-GOST R, Barium to titanium ratio test method

GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R 50469-1993 Ethanol for industrial use. Methods of test. Determination of aldehydes content. Visual colorimetric method
GOST R 50279.5-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" barium content. Flame atomic emission spectrometric method
GOST R 57712-2017 Polymer composites. Test method for determination of specific heat
GOST 28794-1990 Reagents. Method for the determination of specific surface of chromatographic materials by thermal desorption

国家市场监督管理总局、中国国家标准化管理委员会, Barium to titanium ratio test method

GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 38980-2020 Test method for artificial defect sizes of zirconium tube flaw detection comparison samples

NZ-SNZ, Barium to titanium ratio test method

NZS 4402.3.3.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3.3: Soil Chemical Tests - Determination of the pH Value Test 3.3.2: Subsidiary Method (Colorimetric)
NZS 4407.3.15:1991 Methods of sampling and testing road aggregates Test 3.15 The California Bearing Ratio (CBR)
NZS 4402.2.8.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.4: Subsidiary Method for Fine Soils (Hydrometer Method)

Group Standards of the People's Republic of China, Barium to titanium ratio test method

T/CI 038-2021 The test method of mean specific heat capacity for lithium ion battery cell
T/CVIA 113-2023 Dynamic Test Method of Laser Display Speckle Contrast
T/ZHCA 017-2022 Method for assessment on the anagen/telogen ratio
T/CSBM 0015-2021 Method for Evaluating Shape Recoverability of Nickel-Titanium Shape Memory Alloy Bone Plates
T/CSTM 00822-2022 Shearing test method for titanium columbium solid rivets for civil aircraft

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Barium to titanium ratio test method

GB/T 33234-2016 Reflectance test method of reflective glass mirror for concentrated solar power system
GB/T 34500.4-2017 Chemical analysis methods for rare earth waste residue and waste water—Part 4: Determination of copper, zinc, lead, chromium, cadmium, barium, cobalt, manganese, nickel and titanium contents—Inductively coupled plasma emission spectrometry
GB/T 33849-2017 Test method for access network equipment—Gigabit-capable passive optical network(GPON)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Barium to titanium ratio test method

PREN 2003-9-1994 Aerospace Series Test Methods Titanium and Titanium Alloys Part 9 : Determination of Surface Contamination (Issue P1)
PREN 3976-1999 Aerospace Series Titanium and Titanium Alloys Test Method Chemical Analysis for the Determination of Hydrogen Content (Edition P 1)

Professional Standard - Military and Civilian Products, Barium to titanium ratio test method

WJ 2396-1997 Test method for maximum range extinction ratio of solid-state pulsed laser range finder

Malaysia Standards, Barium to titanium ratio test method

MS 133 Pt.B7-1999 Methods of test for paints and varnishes:part b7:determination of soluble barium content - flame atomic emission spectrometric method
MS 133 Pt.D10-1999 Methods of test for paints and varnishes:part d10:colorimetry - colour measurement

Canadian General Standards Board （CGSB), Barium to titanium ratio test method

CGSB 1.500-75 METH 3-CAN2-1973 Methodes D'Essai Des Elements Toxiques A L'Etat De Trace Dans Les Revetements Protecteurs Dosage Du Baryum Extractible (Ba) En Faible Concentration

Professional Standard - Geology, Barium to titanium ratio test method

DZ/T 0064.57-1993 Groundwater quality testing method Nessler's reagent colorimetric method for the determination of ammonium ions

Aerospace, Security and Defence Industries Association of Europe (ASD), Barium to titanium ratio test method

ASD-STAN PREN 3976-1999 Aerospace Series Titanium and Titanium Alloys Test Method Chemical Analysis for the Determination of Hydrogen Content (Edition P 1)

PH-BPS, Barium to titanium ratio test method

PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

European Association of Aerospace Industries, Barium to titanium ratio test method

AECMA PREN 2003-10-1997 Aerospace Series Titanium and Titanium Alloys Test Methods Part 10: Sampling for Determination of Hydrogen Content Edition P 1

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Barium to titanium ratio test method

GJB 2502.2-2006 Test method for thermal control coatings of spacecraft Part 2: Measurement of solar absorptance

AENOR, Barium to titanium ratio test method

UNE-EN ISO 3262-2:1999 EXTENDERS FOR PAINTS. SPECIFICATIONS AND METHODS OF TEST. PART 2: BARYTE (NATURAL BARIUM SULFATE). (ISO 3262-2:1998)