ZH
RU
ES

heating mantle heating mantle

heating mantle heating mantle, Total:500 items.

In the international standard classification, heating mantle heating mantle involves: Thermodynamics and temperature measurements, Domestic, commercial and industrial heating appliances, Burners. Boilers, Hand-held tools, Energy and heat transfer engineering in general, Industrial furnaces, Components and accessories for telecommunications equipment, Electrical wires and cables, Installations in buildings, Insulation, Insulating materials, Welding, brazing and soldering, Protective equipment, Road vehicle systems, Heat recovery. Thermal insulation, Wind turbine systems and other alternative sources of energy, Plastics, Standardization. General rules, Industrial automation systems, Equipment for the chemical industry, Fluid storage devices, Surface treatment and coating, Refrigerating technology, Construction materials, Rubber and plastics products, External water conveyance systems, Petroleum, petroleum products and natural gas handling equipment, Linear and angular measurements, Aerospace electric equipment and systems, Iron and steel products, Chipless working equipment, Manufacturing forming processes, Materials for aerospace construction, Components for aerospace construction, Products of the textile industry, Bearings, Fasteners, Fasteners for aerospace construction, Electrical accessories, Equipment for petroleum and natural gas industries, Protection against electric shock, Miscellaneous domestic and commercial equipment, Leather technology, Non-ferrous metals, Internal combustion engines for road vehicles, Heat pumps, Wastes, Vocabularies, Pipeline components and pipelines, Birth control. Mechanical contraceptives, Refractories, Telecommunication systems, Shipbuilding and marine structures in general, Sewing machines and other equipment for the clothing industry, Environmental protection.


American National Standards Institute （ANSI), heating mantle heating mantle

Underwriters Laboratories (UL), heating mantle heating mantle

  • UL 1030-2004 UL Standard for Safety Sheathed Heating Elements Seventh Edition; Reprint with revisions through and including April 7, 2008
  • UL 1030 BULLETIN-2004 UL Standard for Safety Sheathed Heating Elements
  • UL 1030 BULLETIN-2002 UL Standard for Safety Sheathed Heating Elements
  • UL 1030-2015 UL Standard for Safety Sheathed Heating Elements (Eighth Edition; Reprint with revisions through and including September 28@ 2017)
  • UL 1030 CRD-2017 UL Standard for Safety Sheathed Heating Elements - Section / Paragraph Reference: Multiple Subject: Medium Voltage Sheathed Heating Elements (Edition 8: March 31@ 2015)
  • UL 1030 BULLETINS-2001 UL Standard for Safety Sheathed Heating Elements (06/29/2001 (2p); 04/06/2001 (258p))
  • UL 1030 BULLETIN-2009 UL Standard for Safety Sheathed Heating Elements (COMMENTS DUE: December 28@ 2009)
  • UL 1030 BULLETIN-2008 UL Standard for Safety Sheathed Heating Elements (COMMENTS DUE: July 14@ 2008)
  • UL 1030 BULLETIN-2014 UL Standard for Safety Sheathed Heating Elements (COMMENTS DUE: March 17@ 2014)
  • UL 1030 BULLETIN-2015 UL Standard for Safety Sheathed Heating Elements (COMMENTS DUE: March 9@ 2015)
  • UL 1030 BULLETIN-2017 UL Standard for Safety Sheathed Heating Elements (COMMENTS DUE: JANUARY 29@ 2018)
  • UL 1996-2009 UL Standard for Safety Electric Duct Heaters (Fourth Edition; Reprint with Revisions Through and Including July 15@ 2016)
  • UL 574-2003 UL Standard for Safety Electric Oil Heaters Eighth Edition; Reprint with Revisions Through and Including 5/4/2006
  • UL 499-1987 Electric heating appliances
  • UL 499-1997 Electric heating appliances

US-FCR, heating mantle heating mantle

American Society for Testing and Materials (ASTM), heating mantle heating mantle

  • ASTM E839-11(2016) Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
  • ASTM E839-11(2016)e1 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
  • ASTM C921-02 Standard Specification for Jackets for Thermal Insulation
  • ASTM D2308-07(2020) Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • ASTM D2308-07(2020)e1 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • ASTM C921-03a Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
  • ASTM D120-02a(2006) Standard Specification for Rubber Insulating Gloves
  • ASTM D2308-97 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • ASTM D2308-02 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • ASTM E2181/E2181M-01 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
  • ASTM E2181/E2181M-19 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
  • ASTM D2308-07 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • ASTM D2633-20 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
  • ASTM D4363-98 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
  • ASTM D4363-17 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
  • ASTM D2308-07(2013) Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • ASTM F1603-17 Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
  • ASTM D4363-98(2003) Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
  • ASTM D4363-98(2010) Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
  • ASTM D4363-12 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
  • ASTM E608/E608M-13(2019) Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
  • ASTM C1423-14 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
  • ASTM C1423-15a Standard Guide for Selecting Jacketing Materials for Thermal Insulation
  • ASTM F1602-12(2023) Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated

German Institute for Standardization, heating mantle heating mantle

  • DIN 44875:1986 Electrical metal sheathed tubular heating elements; use
  • DIN 44876:1981 Hexagonal nipples for electrical tubular heating elements
  • DIN EN 61515:2017-03 Mineral insulated metal-sheathed thermocouple cables and thermocouples (IEC 61515:2016); German version EN 61515:2016 / Note: DIN EN 61515 (1996-09) remains valid alongside this standard until 2019-06-01.
  • DIN EN 61515 Berichtigung 2:2019-12 Mineral insulated metal-sheathed thermocouple cables and thermocouples (IEC 61515:2016); German version EN 61515:2016; Corrigendum 2
  • DIN 47634:1984-12 Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests
  • DIN EN 17237:2022 Thermal insulation products for buildings - External thermal insulation composite kits with a rendering system (ETICS kits) - Characteristics; German and English version prEN 17237:2022
  • DIN 47632-2:1978 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes
  • DIN EN 17237:2022-02 Thermal insulation products for buildings - External thermal insulation composite kits with a rendering system (ETICS kits) - Characteristics; German and English version prEN 17237:2022 / Note: Date of issue 2022-01-07
  • DIN 47634:1984 Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests
  • DIN EN 61515:2017 Mineral insulated metal-sheathed thermocouple cables and thermocouples (IEC 61515:2016); German version EN 61515:2016
  • DIN EN 143002:1997-02 Blank detail specification: Directly heated negative temperature coefficient thermistors (beads in envelopes); German version EN 143002:1991
  • DIN EN 60684-3-216:2006 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving (IEC 60684-3-216:2001 + Corrigendum 1:2003 + A1:2005); German version EN 60684-3-216:2005
  • DIN 33830-1:1988 Heat pumps; complet absorption pump units; concepts, requirements, testing, marking
  • DIN 47632-1:1978 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes
  • DIN 44871-1:1987 Electrical heating elements and heating inserts; definitions
  • DIN EN 407:2004 Protective gloves against thermal risks (heat and/or fire); German version EN 407:2004
  • DIN 1850-6:1998-07 Plain bearings - Part 6: Thermoplastic bushes
  • DIN 44576-3:1987 Electric room heating; thermal storage floor heating; characteristics of performance; requirements
  • DIN 44576-1:1987 Electric room heating; thermal storage floor heating; characteristics of performance; definitions
  • DIN 44576-2:1987 Electric room heating; thermal storage floor heating; characteristics of performance; tests
  • DIN 47628-1:1983 Thermoplastic-clamping sleeves for telecommunication cables; dimensions

Korean Agency for Technology and Standards (KATS), heating mantle heating mantle

  • KS C 1615-2017 Metal sheathed thermocouples
  • KS C IEC 60684-3-212-2017(2022) Flexible insulating sleeving－Part 3：Specification for individual types of sleeving－Sheet 212：Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2：1
  • KS C IEC 60684-3-281:2021 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
  • KS C IEC 60684-3-271-2017(2022) Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2：1
  • KS C 2612-1990 Heating Coil of Electric Heated Resin sheet
  • KS C IEC 60684-3-211-2008(2018) Flexible insulating sleeving－Part 3：Specifications for individual types of sleeving－Sheet 211：Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2：1
  • KS C IEC 60684-3-280:2020 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • KS C 2612-2013 Heating Coil of Electric Heated Resin sheet
  • KS C IEC 60684-3-213:2004 Flexible insulating sleeving-Part 3:Specification for individual types of sleeving-Sheet 213:Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1
  • KS C IEC 60684-3-213:2014 Flexible insulating sleeving－Part 3：Specification for individual types of sleeving－Sheet 213：Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2：1
  • KS C IEC 60684-3-213:2017 Flexible insulating sleeving－Part 3：Specification for individual types of sleeving－Sheet 213：Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2：1
  • KS C IEC 60684-3-284:2021 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 284: Heat-shrinkable sleeving, for oil barrier applications
  • KS M ISO 11645:2002 Leather－Heat stability of industrial－glove leather
  • KS M ISO 11645:2007 Leather－Heat stability of industrial－glove leather
  • KS C IEC 60684-3-216:2020 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
  • KS C IEC 60684-3-240-2014(2019) Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 240 to 243: Heat-shrinkable PTFE sleeving
  • KS C IEC 61520-2014(2019) Metal thermowells for thermometer sensors ― Functional dimensions
  • KS R ISO 6550-2-2002(2012) Road vehicles－Sheath-type glow -plugs with conicalseating and their cylinder head housing－Part 2：M12×1.25 glow-plugs
  • KS R ISO 6550-1-2002(2012) Road vehicles－Sheath -type glow-plugs with conicalseating and their cylinder head housing－Part 1：M14×1.25 glow-plug
  • KS C IEC 60684-3-282:2021 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 282: Heat-shrinkable, polyolefin sleeving — Stress control
  • KS B ISO 16287:2021 Plain bearings — Thermoplastic bushes —Dimensions and tolerances

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, heating mantle heating mantle

SAE - SAE International, heating mantle heating mantle

  • SAE AS85080-2004 Insulation Sleeving@ Electrical@ Shrinkable Without Heat@ General Specification For
  • SAE AS3618-2011 CABLE@ SAFETY@ FERRULE@ ELONGATED CORROSION AND HEAT RESISTANT STEEL@ UNS S32100
  • SAE AS3618A-2015 CABLE, SAFETY, FERRULE, ELONGATED CORROSION AND HEAT RESISTANT STEEL, UNS S32100
  • SAE AS85080/3-2004 INSULATION SLEEVING@ ELECTRICAL@ SHRINKABLE WITHOUT HEAT@ POLYURETHANE FLEXIBLE
  • SAE AS85080/5-2004 INSULATION SLEEVING@ ELECTRICAL@ SHRINKABLE WITHOUT HEAT@ POLYCHLOROPRENE
  • SAE AS85080/3A-2012 INSULATION SLEEVING@ ELECTRICAL@ SHRINKABLE WITHOUT HEAT@ POLYURETHANE FLEXIBLE
  • SAE AS85080/4-2004 INSULATION SLEEVING@ ELECTRICAL@ SHRINKABLE WITHOUT HEAT@ CHLOROSULFONATED POLYETHYLENE FLEXIBLE
  • SAE AS85049/141A-2011 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS@ HEAT-SHRINKABLE@ 90 DEGREE@ CATEGORY 7
  • SAE AS85049/141B-2012 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS@ HEAT-SHRINKABLE@ 90 DEGREE@ CATEGORY 7
  • SAE AMS-DTL-23053A-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ General Specification For
  • SAE AS85080/1-2004 INSULATION SLEEVING@ ELECTRICAL@ SHRINKABLE WITHOUT HEAT@ POLYVINYL CHLORIDE@ FLEXIBLE NON-CROSSLINKED
  • SAE AS85080/1A-2012 INSULATION SLEEVING@ ELECTRICAL@ SHRINKABLE WITHOUT HEAT@ POLYVINYL CHLORIDE@ FLEXIBLE NON-CROSSLINKED
  • SAE AS85049/141-2006 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS@ HEAT-SHRINKABLE@ 90°@ CATEGORY 9 (FSC 4090)
  • SAE J2302-2017 Thermal Effectiveness of Sleeve Insulation
  • SAE AS85049/142A-2011 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS AND SLEEVES@ TRANSITIONS@ HEAT-SHRINKABLE@ CATEGORY 7
  • SAE AS85049/142C-2012 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS AND SLEEVES@ TRANSITIONS@ HEAT-SHRINKABLE@ CATEGORY 7
  • SAE AS85049/142B-2012 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS AND SLEEVES@ TRANSITIONS@ HEAT-SHRINKABLE@ CATEGORY 7
  • SAE AS23053/10-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ SILICONE RUBBER@ FLEXIBLE
  • SAE AS23053/10A-2018 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ SILICONE RUBBER@ FLEXIBLE
  • SAE AMS-DTL-23053/10B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Silicone Rubber@ Flexible
  • SAE AMS-DTL-23053/13B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Fluoroelastomer@ Flexible
  • SAE AS85049/140-2006 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS@ HEAT-SHRINKABLE@ STRAIGHT@ CATEGORY 9 (FSC 4090)
  • SAE AS939-1970 SOLDER SLEEVES@ HEAT SHRINKABLE@ INSULATED
  • SAE AS1073A-1989 SLEEVE HOSE ASSEMBLY@ HEAT SHRINKABLE
  • SAE AS1073B-2019 SLEEVE HOSE ASSEMBLY@ HEAT SHRINKABLE
  • SAE AS85080/2-2004 INSULATION SLEEVING@ ELECTRICAL@ NONHEAT SHRINK@ SILICONE RUBBER@ FLEXIBLE
  • SAE AS23053/13-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ FLUOROELASTOMER@ FLEXIBLE
  • SAE AS85049/142-2006 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS AND SLEEVES@ TRANSITIONS@ HEAT-SHRINKABLE@ CATEGORY 9 (FSC 4030)
  • SAE AS23053/5-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ POLYOLEFIN@ FLEXIBLE@ CROSSLINKED
  • SAE AS85049/140A-2011 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS@ HEAT-SHRINKABLE@ STRAIGHT@ CATEGORY 7
  • SAE AS85049/140B-2012 CONNECTOR ACCESSORIES@ ELECTRICAL BOOTS@ HEAT-SHRINKABLE@ STRAIGHT@ CATEGORY 7
  • SAE AS23053/16-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ CROSSLINKED@ ELASTOMERIC POLYOLEFIN@ FLEXIBLE
  • SAE AS23053/11-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE@ NON-CROSSLINKED
  • SAE AS23053/6-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ POLYOLEFIN@ SEMI-RIGID@ CROSSLINKED
  • SAE AS23053/1-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ CROSSLINKED CHLORINATED POLYOLEFIN@ FLEXIBLE
  • SAE AS23053/1A-2018 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ CROSSLINKED CHLORINATED POLYOLEFIN@ FLEXIBLE
  • SAE AMS-DTL-23053/18B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Modified Fluoropolymer@ Crosslinked
  • SAE AMS-DTL-23053/1B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Crosslinked Chlorinated Polyolefin@ Flexible
  • SAE AMS-DTL-23053/11B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Fluorinated Ethylene Propylene@ Non-Crosslinked
  • SAE AMS-DTL-23053/4B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Polyolefin@ Dual-Wall@ Outer Wall Crosslinked
  • SAE AS85848-2002 Sleeving@ for Identification Marking@ Heat Shrinkable@ General Specification for
  • SAE AS85848A-2017 Sleeving@ for Identification Marking@ Heat Shrinkable@ General Specification for
  • SAE AS3510C-2016 CABLE@ SAFETY@ KIT@ CORROSION AND HEAT RESISTANT STEEL@ UNS S32100
  • SAE AS23053/8-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ POLYVINYLIDENE FLUORIDE@ SEMIRIGID@ CROSSLINKED
  • SAE AS23053/4-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ POLYOLEFIN 1/@ DUAL-WALL@ OUTER WALL CROSSLINKED
  • SAE AMS-DTL-23053/17A-2012 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Flame Retarded@ Modified Polyolefin@ Flexible@ Crosslinked
  • SAE AMS-DTL-23053/17B-2019 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Flame Retarded@ Modified Polyolefin@ Flexible@ Crosslinked
  • SAE AS23053/4A-2018 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ POLYOLEFIN 1/@ DUAL-WALL@ OUTER WALL CROSSLINKED

(U.S.) Ford Automotive Standards, heating mantle heating mantle

U.S. Military Regulations and Norms, heating mantle heating mantle

IN-BIS, heating mantle heating mantle

RU-GOST R, heating mantle heating mantle

  • GOST R 50014.2-1994 Safety in electroheat installations. Part 2. Particular requirements for resistance heating equipment
  • GOST R 50014.5-1992 Safety in electroheat equipment. Part 5. Particular requirements for plasma electroheat installations
  • GOST R 50014.3-1992 Safety in electroheat equipment. Part 3. Particular requirements for induction and conduction heating devices and induction furnaces
  • GOST 21297-1975 Guide bushes with screw hole for heated core boxes. Design and dimensions
  • GOST R IEC 60519-1-2005 Safety in electroheat equipment. Part 1. General requirements

Military Standard of the People's Republic of China-General Armament Department, heating mantle heating mantle

  • GJB 7271-2011 Specification for polyolefin heavy dual-wall heat-shrinkable electrical insulation sleeving
  • GJB 7270-2011 General specification for military heat-shrinkable electrical insulation sleevings
  • GJB 7274-2011 Specification for fluid-resistance elastomeric polyolefin heat-shrinkable electrical insulation sleeving
  • GJB 7272-2011 Specification for flexible silicone rubber heat-shrinkable electrical insulation sleeving
  • GJB 7273-2011 Specification for flexible fluoroelastomer heat-shrinkable electrical insulation sleeving
  • GJB 7275-2011 Specification for polytetrafluoroethylene heat-shrinkable electrical insulation sleeving
  • GJB 7279-2011 Specification for flexible polyolefin heat-shrinkable electrical insulation sleeving
  • GJB 7280-2011 Specification for semi-rigid polyolefin heat-shrinkable electrical insulation sleeving
  • GJB 7282-2011 Specification for chlorinated polyolefin heat-shrinkable electrical insulation sleeving
  • GJB 7283-2011 Specification for polyolefin dual-wall heat-shrinkable electrical insulation sleeving
  • GJB 7276-2011 Specification for fluorinated ethylene propylene heat-shrinkable electrical insulation sleeving
  • GJB 7284-2011 Specification for flexible fluoropolymer heat-shrinkable electrical insulation sleeving
  • GJB 7285-2011 Specification for semi-rigid polyvinylidene fluoide heat-shrinkable electrical insulation sleeving
  • GJB 7277-2011 Specification for polyolefin heat-shrinkable marker sleeving
  • GJB 7281-2011 Specification for low-smoking halogen-free flame-retarded polyolefin heat-shrinkable electrical insulation sleeving

Society of Automotive Engineers (SAE), heating mantle heating mantle

国家市场监督管理总局、中国国家标准化管理委员会, heating mantle heating mantle

Professional Standard - Post and Telecommunication, heating mantle heating mantle

  • YD/T 590.2-2005 Plastic jacket joint closure for telecommunication cable Part 2:Heat shrinkable joint closure
  • YD/T 590.2-1992 Splice sleeves for plastic sheaths of telecommunication cables - Part 2: Heat-shrinkable sleeves
  • YD/T 2490-2013 Flame retardant polyolefin heat shrinkable sleeve for communication

British Standards Institution (BSI), heating mantle heating mantle

  • BS 7351:1990 Specification for metal-sheathed heating elements for industrial use
  • BS EN 407:2004 Protective gloves against thermal risks (heat and/or fire)
  • BS EN 61515:2016 Tracked Changes. Mineral insulated metal-sheathed thermocouple cables and thermocouples
  • BS 6374-1:1985 Lining of equipment with polymeric materials for the process idustries - Specification for lining with sheet thermoplastics
  • BS 5615:1985 Specification for insulating jackets for domestic hot water storage cylinders
  • BS 879-2:1988 Water well casing - Specification for thermoplastics tubes for casing and slotted casing
  • BS EN IEC 60684-3-280:2019 Flexible insulating sleeving - Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • BS 6374-3:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins
  • BS ISO 11168:1995 Socket wrenches for spark and glow plugs
  • BS EN 60684-3-284:2014 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, sleevings, for oil barrier applications
  • BS ISO 23407:2021 Protective gloves against thermal risks (heat and/or fire)
  • BS 6374-2:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with non-sheet applied thermoplastics
  • BS EN 60684-3-211:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
  • BS PD ISO/PAS 12835:2013 Qualification of casing connections for thermal wells
  • BS EN 60684-3-280:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, anti-tracking
  • BS EN 60684-3-281:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, semiconductive
  • BS EN 60684-3-280:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, anti-tracking
  • BS EN 60684-3-281:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, semiconductive
  • BS EN 60684-3-282:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving. Stress control
  • BS EN 60684-3-282:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving. Stress control
  • 22/30432847 DC BS EN 17237. Thermal insulation products for buildings. External thermal insulation composite kits with a rendering system (ETIC kits). Characteristics
  • 20/30427405 DC BS ISO 23407. Protective gloves against thermal risks (heat and/or fire)
  • 17/30362443 DC BS EN 407. Protective gloves against thermal risks (heat and/or fire)
  • BS EN 60684-3-246:2007 Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded
  • BS EN 60684-3-283:2011+A1:2014 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, for bus-bar insulation
  • PD ISO/TS 12835:2022 Tracked Changes. Qualification of casing connections for thermal wells
  • BS G 198-5:1997 Sleeves and moulded components for aircraft electric cables and equipment wires. Specification for heat shrinkable moulded shapes
  • BS 6374-4:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins
  • BS EN 60684-3-246:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable polyolefin sleeving, dual-wall, not flame retarded - Heat-shrinkable sleeving,dual wall,not flame retarded,polyolefin
  • BS 4508-1:1986 Thermally insulated underground pipelines - Specification for steel cased systems with air gap
  • BS EN IEC 60684-3-216:2019 Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
  • BS EN 50363-8:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds
  • BS EN 60684-3-209:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable polyolefin sleeving, general purpose, flame retarded
  • BS EN 60684-3-209:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable polyolefin sleeving, general purpose, flame retarded
  • BS 3G 198-4:1996 Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation
  • BS EN 6059-504:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise within a loom due to self-heating when protected by a sleeve
  • BS EN 60684-3-209:2003 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1 - Part 3: Heat-shrinkable polyolefin sleeving, general pu
  • BS EN 60684-3-240 to 243:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable PTFE sleeving
  • BS EN 60684-3-271:2004 Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable elastomer sleeving, flame retarted, fluid resistant, shrink ratio 2:1
  • BS EN 60684-3-271:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
  • BS EN IEC 60684-3-283:2019 Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation

未注明发布机构, heating mantle heating mantle

Group Standards of the People's Republic of China, heating mantle heating mantle

International Electrotechnical Commission (IEC), heating mantle heating mantle

  • IEC 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples
  • IEC 60684-3-280:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • IEC 60684-3-282:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control
  • IEC 60684-3-280:2010+AMD1:2013 CSV Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • IEC 60684-3-280:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • IEC 60684-3-216:2001+AMD1:2005+AMD2:2013 CSV Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving
  • IEC 60684-3-216:2013 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
  • IEC 60684-3-283:2010+AMD1:2013 CSV Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
  • IEC 60684-3-216:2005 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
  • IEC 60684-3-240:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving
  • IEC 60684-3-280:2019 RLV Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • IEC 60684-3-281:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive

Association Francaise de Normalisation, heating mantle heating mantle

  • NF C42-325*NF EN 61515:2016 Mineral insulated metal sheathed thermocouple cables and thermocouples
  • NF C79-636*NF EN 60519-6:2011 Safety in electroheat installations - Part 6 : specifications for safety in industrial microwave heating equipment
  • NF C32-332:2002 Insulated cables and flexible cords for installations - Cables for supply leads with metallic covering for heating equipment by means of heating cables, with metallic covering, for embedding in walls of building.
  • NF EN 50363-8:2006 Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 8 : mélanges thermoplastiques sans halogène pour gaine
  • NF EN 50363-8/A1:2012 Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 8 : mélanges thermoplastiques sans halogène pour gaine
  • NF S75-503:1994 PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE). (EUROPEAN STANDARD EN 407).
  • NF C32-330:2002 Insulated cables and flexible cords for installations - Heating equipment by means of heating cables, with metallic covering for embedding into walls of buildings
  • NF EN 61515:2016 Câbles et couples thermoélectriques à isolation minérale dits "chemisés"
  • NF EN 50363-7:2006 Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 7 : mélanges thermoplastiques sans halogène pour enveloppe isolante
  • NF EN 50363-10-2:2006 Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 10-2 : mélanges divers pour gaine - Polyuréthane thermoplastique
  • NF EN IEC 60684-3-280:2019 Gaines isolantes souples - Partie 3 : spécifications pour types particuliers de gaines - Feuille 280 : gaines thermorétractables, en polyoléfine, anti-cheminement
  • NF C32-333:2002 Insulated cables and flexible cords for installations - Heating equipment by means of heating cables, with metallic covering for embedding into walls of buildings, with low electromagnetic radiation.
  • NF C79-620:1985 Chauffage électrique industriel - Unité de chauffage à éléments chauffants blindés
  • NF C93-643-216*NF EN 60684-3-216:2005 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 216 : heat-shrinkable, flame-retarded, limited-fire hazard sleeving
  • NF EN IEC 60335-2-81:2023 Appareils électrodomestiques et analogues - Sécurité - Partie 2-81 : exigences particulières pour les chancelières et les carpettes chauffantes électriques
  • NF EN IEC 60335-2-81/A2:2023 Appareils électrodomestiques et analogues - Sécurité - Partie 2-81 : exigences particulières pour les chancelières et les carpettes chauffantes électriques
  • NF C93-643-280*NF EN 60684-3-280:2010 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 280 : heat-shrinkable, polyolefin sleeving, anti-tracking
  • NF EN 6059-504:2014 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 504 : augmentation de température due à l'auto-échauffement d'un faisceau de câbles avec gaine de protection
  • NF C93-643-212*NF EN 60684-3-212:2006 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 212 : heat-shrinkable polyolefin sleevings
  • NF C73-223:1983 Heating Household Appliances Water heaters with a partial capacity electrically heated Performance Requirements
  • NF C93-643-211:1994 Specification for flexible insulating sleeving. Part 3 : specification requirements for indivudual types of sleeving. Sheet 211 : heat-shrinkable sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2:1.
  • NF S75-503:2004 Protective gloves against thermal risks (Heat and/or fire).
  • NF C32-334:2002 Insulated cables and flexible cords for installations - Cables for supply leads with low electromagnetic radiations for heating equipment by means of heating cables, with metallic covering, for embedding in walls of building.
  • NF C93-643-209*NF EN 60684-3-209:2010 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 209 : heat-shrinkable polyolefin sleeving, general purpose, flame retarded
  • NF C93-643-209:1993 Specification for flexible insulating sleeving. Part 3 : specification requirements for individual types of sleeving. Sheet 209 : heat shrinkable sleeving, general purpose, flame retarded polyolefin shrink ratio 2:1.
  • NF C93-643-282*NF EN 60684-3-282:2010 Flexible insulating sleeving - Part 3 : specification for individual types of sleeving - Sheet 282 : heat-shrinkable, polyolefin sleeving - Stress control
  • UTE C79-611U*UTE C79-611:1980 Industrial electrical heating. Practical guide of calculation of an industrial furnace electrically heated by resistances.
  • NF UTE C79-611:1980 Chauffage électrique industriel - Guide pratique de calcul d'un four industriel à chauffage électrique par résistances.

ES-UNE, heating mantle heating mantle

  • UNE-EN 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples (Endorsed by AENOR in October of 2016.)
  • UNE-EN 60684-3-281:2010 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive (Endorsed by AENOR in November of 2010.)
  • UNE-EN IEC 60684-3-280:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (Endorsed by Asociación Española de Normalización in November of 2019.)
  • UNE-EN 60684-3-212:2006 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 212: Heat-shrinkable polyolefin sleevings (Endorsed by AENOR in April of 2006.)
  • UNE-EN 6059-504:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve (Endorsed by AENOR in September of 2014.)
  • UNE-EN 60684-3-282:2010 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control (Endorsed by AENOR in November of 2010.)

RO-ASRO, heating mantle heating mantle

  • STAS 525-1987 Fittings for central heating instalations BUSHINGS, NIPPLES, PLUGS
  • STAS SR ISO 11645:1995 Leather — Heat stability of industrial-glove leather
  • STAS 5162/4-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEATH Methods of acceleiated aging

Taiwan Provincial Standard of the People's Republic of China, heating mantle heating mantle

  • CNS 8790-1988 Method of Test for Thermal Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8792-1988 Method of Test for Thermal Impact Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8781-1988 General Rules for Testing of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 9686-1982 Heat-Shrinkable Polyolefin Tubing for Electrical Insulation (Tubular Type)
  • CNS 8783-1988 Method of Test for Contraction Percentage of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8784-1988 Method of Test for Tensile of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8782-1988 Method for Determining Dimension of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 9685-1982 Heat-Shrinkable PVC Tubing for Electrical Insulation (Tubular Type)
  • CNS 8794-1988 1
  • CNS 8793-1988 Method of Test for Combustion Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8788-1988 Method of Test for Water Absorption of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 9687-1982 Heat-Shrinkable PTFE Tubing for Electrical Insulation (Tubular Type)
  • CNS 8795-1988 Method of Test for Copper Corrosion of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8789-1988 Method of Test for Solvent Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8791-1988 Method of Test for Low-Temperature Characteristics of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8785-1988 Method of Test for Electric Strength of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8786-1988 Method for Determining Resistivity of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 9689-1982 Heat-Shrinkable PVF}tq Tubing for Electrical Insulation (Tubular Type)
  • CNS 9690-1982 Heat-Shrinkable Chloroprene Tubing for Electrical Insulation (Tubular Type)

Professional Standard - Machinery, heating mantle heating mantle

Professional Standard - Aviation, heating mantle heating mantle

Danish Standards Foundation, heating mantle heating mantle

  • DS/EN 407:1994 Protective gloves against thermal risks (heat and/or fire)
  • DS/EN 407:2004 Protective gloves against thermal risks (heat and/or fire)
  • DS/EN 60684-3-280:2011 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • DS/EN 60684-3-212:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
  • DS/EN 60684-3-240 til 243:2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving
  • DS/EN 50363-8/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds
  • DS/EN 50363-8:2006 Insulating, sheathing and covering materials for low voltage energy cables – Part 8: Halogen-free, thermoplastic sheathing compounds
  • DS/EN 60684-3-281:2012 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive

AT-ON, heating mantle heating mantle

European Committee for Standardization (CEN), heating mantle heating mantle

  • prEN 407-1992 Protective gloves against thermal risks (heat and/or fire)
  • prEN 600-7-1991 Latex rubber condoms; part 7: oven treatment of condoms
  • EN 407:2004 Protective gloves against thermal risks (heat and/or fire)
  • EN 407:1994 Protective Gloves Against Thermal Risks (Heat and/ or Fire)
  • EN 407:2020 Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)

Professional Standard - Coal, heating mantle heating mantle

  • MT/T 848.2-2000 Vulcanizing repair tape for rubber sheathed mining cables.Part 2:Rubber sheath repair tape
  • MT/T 848.1-2000 Vulcanizing repair tape for rubber sheathed mining cables.Part 1:Rubber insulation repair tape

国家煤炭工业局, heating mantle heating mantle

  • MT 848.2-2000 Rubber sheathed vulcanized hot patching tape for coal mine use Part 2: Rubber sheathed vulcanized hot patching tape
  • MT 848.1-2000 Rubber sheathed cable vulcanized hot patch tape for coal mines Part 1: Rubber insulated vulcanized hot patch tape

American Society of Mechanical Engineers (ASME), heating mantle heating mantle

International Organization for Standardization (ISO), heating mantle heating mantle

Professional Standard - Automobile, heating mantle heating mantle

  • QC/T 1181-2023 Automotive air-conditioning sleeve type internal heat exchanger

工业和信息化部/国家能源局, heating mantle heating mantle

  • JB/T 12944-2016 Looper for hot dip galvanizing unit
  • JB/T 13040-2017 Heating and insulation riser sleeve for casting
  • JB/T 12514-2014 Electric heater for hot runner
  • JB/T 12489-2014 Technical conditions of complete set of equipment for waste heat recovery and utilization of ferrosilicon ore furnace
  • JB/T 12906-2016 Performance test method for complete set of equipment for waste heat recovery and utilization of ferrosilicon ore furnaces

ZA-SANS, heating mantle heating mantle

  • SANS 755:2006 Mineral-insulated metal-sheathed air-heating units for appliances

Lithuanian Standards Office , heating mantle heating mantle

  • LST EN 407-2004 Protective gloves against thermal risks (heat and/or fire)
  • LST EN 50363-8-2006/A1-2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 8: Halogen-free, thermoplastic sheathing compounds
  • LST EN 60684-3-280-2011 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2010)

AENOR, heating mantle heating mantle

  • UNE-EN 407:2005 Protective gloves against thermal risks (heat and/or fire)
  • UNE-EN 50363-8:2006/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 8: Halogen-free, thermoplastic sheathing compounds
  • UNE-EN 50363-8:2006 Insulating, sheathing and covering materials for low voltage energy cables -- Part 8: Halogen-free, thermoplastic sheathing compounds

CEN - European Committee for Standardization, heating mantle heating mantle

  • PREN 407-2017 Protective gloves against thermal risks (heat and/or fire)

Association of German Mechanical Engineers, heating mantle heating mantle

  • DVS 2206-5-2011 Non-destructive tests on piping made of thermoplastics - Angle measurement on welded joints executed by means of sleeve welding with an incorporated heating element (HM) and heated tool sleeve welding (HD)
  • DVS 2203-6 Beiblatt 1-2008 Testing of joints between polymeric materials - Torsion shear and radial peeling tests for joints executed by means of sleeve welding with an incorporated electric heating element and heated tool sleeve welding

工业和信息化部, heating mantle heating mantle

  • HG/T 5832-2021 Non-welded sleeve thermocouples for chemical equipment
  • HG/T 2376-2017 Glass lined sleeve heat exchanger
  • JB/T 14101-2020 Flue gas denitrification urea pyrolysis ammonia production complete equipment
  • JB/T 14091-2020 Technical Specifications for Acceptance of Complete Sets of Waste Heat Recovery and Utilization Devices of Ferrosilicon Ore Furnaces

Professional Standard - Petroleum, heating mantle heating mantle

  • SY/T 0419-1997 Specification for construction and acceptance of oil-field heater manufacture and installation
  • SY/T 6952.2-2013 Thermal casing string for strain-based design.Part 2: Casing
  • SY 6952.2-2013 Strain-Based Design of Thermal Well Casing Strings Part II: Casing
  • SY/T 4054-2003 Radiation crosslinked polyethylene heat shrinkable tape (sleeve)
  • SY/T 6952.4-2014 Thermal casing string for strain based design.Part 4: Casing connection
  • SY 6952.4-2014 Strain-Based Design of Casing Strings for Thermal Recovery Part 4: Casing Threaded Connections

Professional Standard - Chemical Industry, heating mantle heating mantle

Professional Standard - Military and Civilian Products, heating mantle heating mantle

  • WJ 2149-1993 General specification for barrel thermal jackets

United States Navy, heating mantle heating mantle

KR-KS, heating mantle heating mantle

  • KS C IEC 60684-3-281-2021 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
  • KS C IEC 60684-3-280-2020 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • KS C IEC 60684-3-201-2014 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 201: Heat-shrinkable sleeving, general, purpose, flexible, cross-linked PVC, shrink ratio 2：1
  • KS C IEC 60684-3-284-2021 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 284: Heat-shrinkable sleeving, for oil barrier applications
  • KS M ISO 11645-2002 Leather－Heat stability of industrial－glove leather
  • KS R ISO 6550-3-2013 Road vehicles－Sheath-type glow-plugs with conical seating and their cylinder head housing－Part 3：M10 glow-plugs
  • KS C IEC 60684-3-216-2020 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
  • KS C IEC 60684-3-282-2021 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 282: Heat-shrinkable, polyolefin sleeving — Stress control
  • KS R ISO 7578-2013 Road vehicles－Sheath-type glow-plugs－General requirements and test methods
  • KS B ISO 16287-2021 Plain bearings — Thermoplastic bushes —Dimensions and tolerances

IT-UNI, heating mantle heating mantle

  • UNI 7735-1978 Hot forged finished steel products. Seamles bushes. Tolerances and machining allowances.

CZ-CSN, heating mantle heating mantle

Professional Standard - Textile, heating mantle heating mantle

Defense Logistics Agency, heating mantle heating mantle

Henan Provincial Standard of the People's Republic of China, heating mantle heating mantle

CENELEC - European Committee for Electrotechnical Standardization, heating mantle heating mantle

  • EN 60684-3-212:1998 Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheet 212: Heat-Shrinking Polyolefin Sleeving@ Flame Retarded@ Shrink Ratio 2:1
  • EN 60684-3-246:2002 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 246: Heat-Shrinkable Polyolefin Sleeving@ Dual-Wall@ Not Flame-Retarded
  • EN 60684-3-246:1995 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving; Sheet 246: Heat-Shrinkable Sleeving@ Dual-Wall@ Not Flame-Retarded@ Polyolefin

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), heating mantle heating mantle

Professional Standard - Light Industry, heating mantle heating mantle

Professional Standard - Railway, heating mantle heating mantle

  • TB 1214-1980 Repair grade of return valve sleeve of hot water pump
  • TB/T 10301-1994 Technical specification for underground heat-shrinkable sleeve splicing of railway signal cables

European Committee for Electrotechnical Standardization（CENELEC）, heating mantle heating mantle

  • EN IEC 60684-3-280:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
  • EN 60684-3-280:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (Incorporates Amendment A1: 2014)
  • EN 60684-3-281:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
  • EN 60684-3-216:2005 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving (Incorporates Amendment A2: 2014)
  • EN 60684-3-246:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded
  • EN 60684-3-284:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications

PL-PKN, heating mantle heating mantle

NZ-SNZ, heating mantle heating mantle

  • AS/NZS 2161.4:1999 Occupational Protective Gloves Part 4: Protection Against Thermal Risks (Heat and Fire)
  • NZSS GP 43-1965 ELECTRICALLY-HEATED HOT FOOD SERVICE COUNTERS (BAIN MARIE TYPE) WITH CUPBOARDS
  • NZSS GP 40-1965 ELECTRICALLY HEATED HOT CUPBOARDS

Insulated Cable Engineers Association （ICEA), heating mantle heating mantle

  • ICEA S-100-685-2009 THERMOPLASTIC INSULATED AND JACKETED TELECOMMUNICATIONS STATION WIRE FOR INDOOR/OUTDOOR USE TECHNICAL REQUIREMENTS
  • ICEA S-100-685-2016 THERMOPLASTIC INSULATED AND JACKETED TELECOMMUNICATIONS STATION WIRE FOR INDOOR/OUTDOOR USE

BE-NBN, heating mantle heating mantle

SE-SIS, heating mantle heating mantle

  • SIS SS 484 01 23-1991 Industrial electroheating installations - Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipplesfor use in electric arcfumaces

IE-NSAI, heating mantle heating mantle

HU-MSZT, heating mantle heating mantle

US-CFR, heating mantle heating mantle

Building Officials and Code Administrators International(U.S.), heating mantle heating mantle

International Code Council, heating mantle heating mantle

Professional Standard - Aerospace, heating mantle heating mantle

  • QJ 2068-1991 Test methods for thermal stiffness and thermal strength of carbon-carbon heat shields for ballistic missile warheads

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., heating mantle heating mantle

  • ASHRAE 16-2016 Method of Testing for Rating Room Air Conditioners@ Packaged Terminal Air Conditioners@ and Packaged Terminal Heat Pumps for Cooling and Heating Capacity
  • ASHRAE 4169-1998 Thermoelectric Self-Powered Hydronic Heating Demonstration

国家能源局, heating mantle heating mantle

  • NB/T 10310-2019 Electric heating belt (wire) for compressor auxiliary heating

DE-DVS, heating mantle heating mantle

  • DVS 2203-1 Beiblatt 4-2008 Testing of welded joints between panels and pipes made of thermoplastics - Requirements on shear and peeling tests for sleeve welding with an incorporated electric heating element (HM) and heated tool sleeve welding (HD) on pipes and fittings

Japanese Industrial Standards Committee (JISC), heating mantle heating mantle

YU-JUS, heating mantle heating mantle

  • JUS N.C0.195-1979 Electric power and lighting. Thermoplastic and thermosetting insulations, sheaths and protective layers for insulated cords and cables
  • JUS N.R1.108-1977 Electronic tubes. Measurements of the electrical properties. Measurement of cathode heating time and heater warm-up time

Professional Standard - Ferrous Metallurgy, heating mantle heating mantle

  • YB/T 6113-2023 Silicon carbide thermal conductor for electric heating furnace

ICEA - Insulated Cable Engineers Association Inc., heating mantle heating mantle

  • S-100-685-2016-2016 THERMOPLASTIC INSULATED AND JACKETED TELECOMMUNICATIONS STATION WIRE FOR INDOOR/OUTDOOR USE

Professional Standard - Urban Construction, heating mantle heating mantle

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, heating mantle heating mantle

Professional Standard-Ships, heating mantle heating mantle

  • CB/T 4206-2013 Heat insulating cover of inorganic fabric for diesel engine exhaust system

Institute of Electrical and Electronics Engineers (IEEE), heating mantle heating mantle

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., heating mantle heating mantle

  Heating mantle, Electric heating mantle structure, Heating mantle temperature, Application of electric heating mantle, Heating Mantle Solid, Heating mantle instrument, Heating Mantle Equipment, Electric mantle heating, heating mantle, Electric heating sleeve, Electric heating mantle use, Heating Mantle 27, Electric heating mantle parameters, Heating mantle temperature, Thermocouple set, Aluminum Heating Mantle Electric Heating Mantle, Heating mantle not heating, heating mantle heating mantle, Electric heating mantle heating temperature, heating mantle.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved