ZH
RU
ES

Portable Temperature Measuring Instrument

Portable Temperature Measuring Instrument, Total:293 items.

In the international standard classification, Portable Temperature Measuring Instrument involves: Radiation measurements, Radiation protection, Water quality, Paints and varnishes, Footwear, Surface treatment and coating, Mechanical testing, Testing of metals, Aerospace electric equipment and systems, Thermodynamics and temperature measurements, Structures of buildings, Microprocessor systems, Road engineering, Optics and optical measurements, Fuels, Solar energy engineering, Air quality, Non-destructive testing, Electrical wires and cables, Measurement of volume, mass, density, viscosity, Petroleum products in general, Kitchen equipment, Non-ferrous metals, Vocabularies, Alarm and warning systems, Analytical chemistry, Installations in buildings, Protective equipment, Nuclear energy engineering, Protection against fire, Noise with respect to human beings, Agricultural machines, implements and equipment, Acoustics and acoustic measurements, Fluid storage devices, Electrical equipment for working in special conditions, Protection against dangerous goods, Commercial vehicles, Hand-held tools, Electromagnetic compatibility (EMC), Fibre optic communications, Road vehicle systems, Domestic, commercial and industrial heating appliances, Shipbuilding and marine structures in general, Vibration and shock with respect to human beings, Ventilators. Fans. Air-conditioners, Standardization. General rules, Environmental testing.

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Portable Temperature Measuring Instrument

IEEE N323A ERTA-2004 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instruments
IEEE N323AB-2013 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instruments
IEEE N323B-2003 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instrumentation for Near Background Operation
IEEE N42.33-2003 Portable Radiation Detection Instrumentation for Homeland Security
IEEE N13.4-1971 Standard for the Specification of Portable X- or Gamma-Radiation Survey Instruments
IEEE PN42.33D3-2018 DRAFT Standard for Portable Gamma and X Radiation Detection Instrumentation for Homeland Security

American National Standards Institute （ANSI), Portable Temperature Measuring Instrument

ANSI N323A-1997 Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments
ANSI N323A/B-2013 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323B-2003 Installed Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments for Near Background Operation
ANSI/NEMA ICEAT-27-581-2008 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/ASTM D3948:2013 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ANSI/ICEA T-26-465-2013 Guide For Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/NEMA WC 53-2016 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test (JOINT PUBLICATION - NEMA WC 53/ICEA T-27-581)
ANSI/EIA/TIA 5430000:1989 Generic Specification for Field Portable Electronic Instruments for Optical Fiber System Measurements / Note: reaffirmation and redesignation of ANSI/EIA 5430000-1989 * Approved 1998-03-03.

Institute of Electrical and Electronics Engineers (IEEE), Portable Temperature Measuring Instrument

IEEE N323A-1997 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE N323A/COR-2004 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N323A-1997 American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323AB-2013 (Revision and Redesignation of ANSI N323A-1997 and ANSI N323B-2002) American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE N42.17C-1989 Performance specifications for health physics instrumentation; portable instrumentation for use in extreme environmental conditions
IEEE/ANSI N323B-2003 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation
IEEE N42.33-2006 Portable Radiation Detection Instrumentation for Homeland Security
IEEE/ANSI N42.33-2006 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
IEEE/ANSI N42.33-2003 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
ANSI PN42.33/D3.4, May 2018 IEEE/ANSI Draft Standard for Portable Gamma and Radiation Detection Instrumentation for Homeland Security
ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE/ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE P1505.3/D10, February 2015 IEEE Draft Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Bench Top Test Requirements Utilizing IEEE 1505 Receiver Fixture Interface Standard
IEEE P1505.3/D8, November 2014 IEEE Draft Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Bench Top Test Requirements Utilizing IEEE 1505 Receiver Fixture Interface Standard
IEEE Std 1505.3-2015 IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
IEEE P1505.3/D11, May 2015 IEEE Approved Draft Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
P1505.3/D11, May 2015 IEEE Approved Draft Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard

Group Standards of the People's Republic of China, Portable Temperature Measuring Instrument

T/NAIA 102-2021 Determination of Water Quality and Temperature with Portable Sensor Method
T/CAB 0238-2023 Performance requirements and test methods under high temperature condition for notebooks

U.S. Air Force, Portable Temperature Measuring Instrument

AIR FORCE MIL-T-26561 C REINST NOTICE 2-2003 TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE
AIR FORCE MIL-T-26561 C-1984 TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE

SE-SIS, Portable Temperature Measuring Instrument

SIS SS IEC 460:1983 Nuclear instrumentation - Portable prospecting radiation meters with gamma-ray scintillation detectors (linear scale instruments)
SIS SS 428 91 05-1982 Portable single pole voltage testers for 3,6 - 420 kV h/g hes t system voltage - Design and testing
SIS SS 428 91 05-1985 Portable single po/e voltage testers for 3,6 - 420 kV highest system voltage - Design and testing
SIS SS IEC 395:1983 Nuclear instrumentation - Portable X or gamma radiation exposure r?te meters and monitors for use in radiological protection

American Society for Testing and Materials (ASTM), Portable Temperature Measuring Instrument

ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D4541-09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM F1702-10(2018) Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM C1371-04a(2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E2540-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM E1709-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM D7234-05 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E1709-09 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7127-17 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM C1549-02 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-04 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1371-04 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C1371-04a Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E110-82(1997)e2 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM D7261-12 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D7261-13 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM C1549-16(2022) Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-16 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-09(2014) Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM C1371-98 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C1371-15 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C1371-15(2022) Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM A1038-10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM D4541-17 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM A1038-13 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM F1702-96 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
ASTM F1702-96(2002)e1 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
ASTM E2540-16e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM E2540-16 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM D7234-21 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D3948-07 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM E1696-15(2022) Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
ASTM D3948-22 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D3948-11 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D3948-13 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D7777-12 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM D3948-08 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM E1709-16e2 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E1709-08 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E170-08 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-08b Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-08d Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-14 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-16a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E1709-16 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E1709-16e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E170-08c Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-09 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-09a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-08a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM D3284-99 Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM D3284-05 Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM D3284-05(2011) Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM D6756-09a Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM F1702-10 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM E1809-96 Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retrorelectometer
ASTM E180-85 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
ASTM E1809-01 Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer
ASTM E1710-97 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM D7261-14 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D7224-12 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7234-22 Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E2366-05 Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
ASTM E2367-05 Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
ASTM E2367-05(2019) Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
ASTM E1710-05 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E1710-11 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM D6522-20 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Proce
ASTM D7058-04 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D7058-04(2009) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM E2367-05(2014) Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
ASTM D8406-22 Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensor-based Instruments for Portable and Fixed-point Measurement
ASTM D3948-04 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D7224-05e1 Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7224-05 Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7224-08 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D3948-14 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D6522-00 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D6522-00(2005) Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D6522-11 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D7224-23 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM E1893-08 Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
ASTM E1893-97(2003) Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments in Support of Decommissioning
ASTM E1893-97 Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments in Support of Decommissioning
ASTM E1893-15(2021) Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
ASTM D7777-13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM D7777-13(2018)e1 Standard test method for measuring liquid petroleum density, relative density, or API fuel specific gravity using a portable density meter/hydrometer
ASTM E2302-03a(2022) Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
ASTM D8274-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D8274-19 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D8274-20a Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D6748-02a Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D6748-02 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D6756-02 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-10(2015) Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-09 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D7224-14(2018) Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7224-14 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7224-20 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7224-13 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7058-19 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D7058-04(2014) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

Association Francaise de Normalisation, Portable Temperature Measuring Instrument

NF EN 62534:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection neutronique de matières radioactives
NF EN 62533:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection photonique de matières radioactives
NF EN 62363:2011 Instrumentation pour la radioprotection - Appareils portables de mesure et de surveillance de la contamination par des photons
NF EN 61582:2006 Instrumentation pour la radioprotection - Systèmes de mesure in vivo - Classification, exigences générales et procédures d'essai pour les appareils portables, mobiles ou à poste fixe
NF EN ISO 22868:2021 Machines forestières et machines de jardin - Code d'essai acoustique pour machines portatives tenues à la main à moteur à combustion interne - Méthode d'expertise (classe de précision 2)
NF EN 60846-2:2018 Instrumentation pour la radioprotection - Instruments pour la mesure et/ou la surveillance de l'équivalent de dose (ou du débit d'équivalent de dose) ambiant et/ou directionnel pour les rayonnements bêta, X et gamma - Partie 2 : instruments porta...
NF EN IEC 62327:2019 Instrumentation pour la radioprotection - Instruments portables pour la détection et l'identification des radionucléides et pour l'estimation du débit d'équivalent de dose ambiant pour le rayonnement de photons
NF C23-595-2*NF EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2 : performance requirements for apparatus used in statutory inspections and assessment
NF U25-515*NF EN ISO 22867:2021 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
NF U25-514*NF EN ISO 22868:2021 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
NF C19-104*NF EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
NF EN ISO 11806-2:2022 Matériel agricole et forestier - Exigences de sécurité et essais pour débroussailleuses et coupe-herbe portatifs à moteur - Partie 2 : machines pour utilisation avec source motrice portée à dos
NF C23-595-1*NF EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1 : general requirements and test methods
NF E29-790*NF EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without valve, for use with portable appliances - Construction, inspection, testing and marking

NEMA - National Electrical Manufacturers Association, Portable Temperature Measuring Instrument

NEMA WC 53-1990 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test
NEMA WC 54-2008 GUIDE FOR FREQUENCY OF SAMPLING EXTRUDED DIELECTRIC POWER@ CONTROL@ INSTRUMENTATION@ AND PORTABLE CABLES FOR TEST
NEMA WC 54-1990 Guide for Frequency of Sampling Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test
NEMA WC 53-2000 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test (ICEA T-27-581)
NEMA WC 54-1983 GUIDE FOR FREQUENCY OF SAMPLING EXTRUDED DIELECTRIC POWER@ CONTROL@ INSTRUMENTATION@ AND PORTABLE CABLES FOR TEST (ICEA NO. T-26-465)
NEMA WC 53-2016 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test (JOINT PUBLICATION - NEMA WC 53/ICEA T-27-581)
NEMA WC 53-1983 STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER@ CONTROL@ INSTRUMENTATION AND PORTABLE CABLES (ICEA NO. T-27-581); REVISION 1 - JULY 1987

German Institute for Standardization, Portable Temperature Measuring Instrument

DIN 50158-1:2008-07 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
DIN 50158-2:2008-04 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices
DIN VDE 0493-100:2010 Radiation protection instrumentation - Part 100: Periodic testing of portable contamination monitoring assemblies
DIN 50158-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
DIN 50157-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1: Test method
DIN 50157-2:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN 50158-2:2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices
DIN 50157-1:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method
DIN EN ISO 22868:2021-05 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021); German version EN ISO 22868:2021
DIN 12786:1981 Laboratory glassware; enclosed scale thermometers for measurements in heatengine generating stations
DIN 50157-1:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method
DIN 50157-2:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN ISO 22867:2022-03 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021); German version EN ISO 22867:2021
DIN EN ISO 22868:2018 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO/DIS 22868:2018); German and English version prEN ISO 22868:2018
DIN 50157-2:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN 3372-1:2023-02 Gas-appliances - Radiant heaters with burners without fan: Stationary heaters for outdoor use and portable heaters for indoor and outdoor use - Part 1: Requirements and tests / Note: Date of issue 2023-01-20*Intended as replacement for DIN 3372-2 (1980...
DIN EN ISO 22867:2020 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO/DIS 22867:2020); German and English version prEN ISO 22867:2020

IN-BIS, Portable Temperature Measuring Instrument

Korean Agency for Technology and Standards (KATS), Portable Temperature Measuring Instrument

KS C IEC 61562-2005(2020) Radiation protection instrumentation－Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
KS C IEC 61562:2005 Radiation protection instrumentation－Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
KS B ISO 22868-2014(2019) Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method(Grade 2 accuracy)
KS C IEC 61582-2012(2017) Radiation protection instrumentation－In vivo counters－Classification, general requirements and test procedures for portable, transportable and installed equipment
KS C IEC 61582-2012(2022) Radiation protection instrumentation－In vivo counters－Classification, general requirements and test procedures for portable, transportable and installed equipment
KS C IEC 62397-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 60846-1-2014(2019) Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 1: Portable workplace and environmental meters and

Professional Standard - Ferrous Metallurgy, Portable Temperature Measuring Instrument

YB/T 4285-2012 Standard test method for indentation hardness of metallic materials by portable hardness testers

U.S. Military Regulations and Norms, Portable Temperature Measuring Instrument

ARMY MIL-D-10795 F NOTICE 1-1998 DRIVER TESTING AND TRAINING DEVICES, PORTABLE AND SIMULATOR
ARMY MIL-D-10795 F-1987 DRIVER TESTING AND TRAINING DEVICES, PORTABLE AND SIMULATOR

ICEA - Insulated Cable Engineers Association Inc., Portable Temperature Measuring Instrument

T-26-465-1990 Guide for Frequency of Sampling Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test
T-27-581-2000 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test (See WC 53@ which is based upon ICEA T-27-581)
T-27-581-1990 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test (See WC 53@ which is based upon ICEA T-27-581)
T-27-581-2016-2016 STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER@ CONTROL@ INSTRUMENTATION@ AND PORTABLE CABLES FOR TEST (JOINT PUBLICATION - NEMA WC 53/ICEA T-27-581)
T-26-465-2013-2012 GUIDE FOR FREQUENCY OF SAMPLING EXTRUDED DIELECTRIC POWER@ CONTROL@ INSTRUMENTATION@ AND PORTABLE CABLES FOR TEST (JOINT PUBLICATION - NEMA WC 54/ICEA T-26-465)

Standard Association of Australia （SAA）, Portable Temperature Measuring Instrument

AS 2365.2:1993(R2014)
AS 2365.2:1993 Methods for the sampling and analysis of indoor air - Determination of carbon monoxide - Direct-reading portable instrument method
AS/NZS 1850:1997/AMD 1:2001 Amendment No. 1 to AS/NZS 1850:1997 Portable fire extinguishers — Classification, rating and performance testing

RO-ASRO, Portable Temperature Measuring Instrument

STAS SR CEI 1018-1995 High range beta and photon dose and dose rate portable instruments for emerpency radiation protection purposes
STAS 11441-1980 PORTABLE X ORJGAMMA RADIATION EXPOSURE RATE METERS AND MONITORS FOR USE IN RADIOLOGICAL PROTECTION Prescriptions and test methods

未注明发布机构, Portable Temperature Measuring Instrument

BS 7515:1995(1999)*IEC 1263:1994 Radiation protection instrumentation — Portable potential alpha energy meter for rapid measurements in mines
DIN EN ISO 22868 Berichtigung 1:2007 Forestry machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2005)
DIN EN 3 Beiblatt 3:2005 Portable fire extinguishers – sample test report in conjunction with EN 3-7; German version CEN/TR 14922:2004
BS 7518:1995(1999)*IEC 1017-2:1994 Radiation protection instrumentation — Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring — Integrating assemblies

Professional Standard - Energy, Portable Temperature Measuring Instrument

NB/SH/T 0868-2013 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method

Professional Standard - Commodity Inspection, Portable Temperature Measuring Instrument

SN/T 3230-2012 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method

SG-SPRING SG, Portable Temperature Measuring Instrument

SS 232 Pt.5-1999 SPECIFICATION FOR Portable fire extinguishers Part 5: Specification and supplementary tests
SS 232 Pt.2-1999 SPECIFICATION FOR Portable fire extinguishers Part 2 : Tightness, dielectric test, tamping test, special provisions

National Electrical Manufacturers Association（NEMA), Portable Temperature Measuring Instrument

NEMA WC 54-2001 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
NEMA WC 54-2013 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Portable Temperature Measuring Instrument

GB/T 23104-2008 Household portable applicances for cooking,grilling and similar use.Methods for measuring performance

International Electrotechnical Commission (IEC), Portable Temperature Measuring Instrument

IEC 61562:2001 Radiation protection instrumentation - Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
IEC 61582:2004 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment

Lithuanian Standards Office , Portable Temperature Measuring Instrument

LST EN 61582-2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment (IEC 61582:2004, modified)
LST EN ISO 22868:2011 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)
LST EN ISO 22868:2021 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)
LST EN ISO 28927-9:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
LST EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
LST EN 50379-1-2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances -- Part 1: General requirements and test methods

ES-UNE, Portable Temperature Measuring Instrument

UNE-EN ISO 22868:2021 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)
UNE-EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment (IEC 61582:2004, modified) (Endorsed by AENOR in November of 2006.)
UNE-EN ISO 22867:2022 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)
UNE-EN ISO 11806-2:2022 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)

Underwriters Laboratories (UL), Portable Temperature Measuring Instrument

UL 711A BULLETIN-2005 OUTLINE OF INVESTIGATION FOR THE FIRE TEST METHOD FOR PORTABLE HAND-HELD EXTINGUISHERS INTENDED FOR USE ON RESIDENTIAL COOKING EQUIPMENT
UL SUBJECT 711A-2005 OUTLINE OF INVESTIGATION FOR THE FIRE TEST METHOD FOR PORTABLE HAND-HELD EXTINGUISHERS INTENDED FOR USE ON RESIDENTIAL COOKING EQUIPMENT (Issue 1)
UL SUBJECT 711A-2017 OUTLINE OF INVESTIGATION FOR THE FIRE TEST METHOD FOR PORTABLE HAND-HELD EXTINGUISHERS INTENDED FOR USE ON RESIDENTIAL COOKING EQUIPMENT (Issue 2)
UL SUBJECT 711A-2018 UL Outline of Investigation for the Fire Test Method for Portable Hand-Held Extinguishers Intended for Use On Residential Cooking Equipment (Issue 3)

British Standards Institution (BSI), Portable Temperature Measuring Instrument

BS EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
BS EN 50379-2:2004 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Performance requirements for apparatus used in statutory inspections and assessment
BS EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in statutory inspections and assessment
BS EN ISO 22867:2021 Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
18/30364152 DC BS EN ISO 22868. Forestry and gardening machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
BS EN ISO 22868:2021 Tracked Changes. Forestry and gardening machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
BS 7518:1995 Radiation protection instrumentation - Portable, transportable or installed equipment to measure x or gamma radiation for environmental monitoring - Integrating assemblies
20/30376305 DC BS EN ISO 22867. Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS IEC 60846-2:2015 Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation. High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
BS ISO 11452-9:2021 Tracked Changes. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Portable transmitters
BS EN ISO 22868:2011 Forestry and garden machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances
BS ISO 19891-1:2017 Tracked Changes. Ships and marine technology. Specifications for gas detectors intended for use on board ships. Portable gas detectors for atmosphere testing of enclosed spaces
BS EN ISO 11806-2:2022 Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Machines for use with backpack power unit
BS EN ISO 11806-1:2022 Tracked Changes. Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers. Machines fitted with an integral combustion engine
BS EN 3-8:2006(2007) Portable fire extinguishers - Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

Danish Standards Foundation, Portable Temperature Measuring Instrument

DS/EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
DS/SBC 246:2007 Specific conditions for certification of the conformity of pressure testing, inspection and recharging of portable fire extinguishers with DS 2320
DS/EN ISO 22868:2021 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2021)
DS/EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
DS/ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
DS/ISO 11452-9:2021 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 9: Portable transmitters
DS/EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
DS/EN ISO 11806-1:2012 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine

VN-TCVN, Portable Temperature Measuring Instrument

TCVN 7272-2010 Standard test method for determining water separation characteristics of aviation turbine fuels by portable separometer

Compressed Gas Association (U.S.), Portable Temperature Measuring Instrument

CGA C-21-2015 Standard for Design, qualification, and testing of pressure vessels for portable, reversible metal hydride systems

GOSTR, Portable Temperature Measuring Instrument

GOST IEC 62841-3-14-2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety and test methods. Part 3-14. Particular requirements for transportable drain cleaners

AT-ON, Portable Temperature Measuring Instrument

OENORM EN ISO 22868:2021 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)
ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity

AENOR, Portable Temperature Measuring Instrument

UNE-EN ISO 22868:2011 Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)
UNE-EN ISO 28927-9:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
UNE-EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
UNE-EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods

NL-NEN, Portable Temperature Measuring Instrument

NVN 5639-1992 Radioactivity measurements. Determination of the momentary exposure rate by portable radiation measurement instruments equipped with a gas ionization detector, in particular for nuclear accident control

ZA-SANS, Portable Temperature Measuring Instrument

SANS 1825:2005 Gas container test stations - General requirements for periodic inspection and testing of portable and transportable refillable gas containers
SANS 1515-1:2006 Gas measuring equipment primarily for use in mines Part 1: Battery-operated portable, flammable gas measuring instruments and warning devices
SANS 1518:2008 Transport of dangerous goods - Design, construction, testing, approval and maintenance of road vehicles and portable tanks

RU-GOST R, Portable Temperature Measuring Instrument

GOST R IEC 60335-2-45-1999 Safety of household and similar electrical appliances. Particular requirements for portable heating tools and similar appliances ang test methods
GOST R IEC 335-2-9-1996 Safety of household and similar electrical appliances. Particular requirements for grills, toasters and similar portable cooking appliances and test methods
GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature

Insulated Cable Engineers Association （ICEA), Portable Temperature Measuring Instrument

ICEA T-27-581-2000 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test [Use: NEMA WC 53, NEMA WC 53, NEMA WC 53, NEMA WC 53]
ICEA T-26-465-1990 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test [Use: NEMA WC 54, NEMA WC 54, NEMA WC 54, NEMA WC 54]

European Committee for Electrotechnical Standardization（CENELEC）, Portable Temperature Measuring Instrument

EN 61817:2001 Household portable appliances for cooking, grilling and similar use - Methods for measuring performance (Incorporates Amendment A1: 2004)

International Organization for Standardization (ISO), Portable Temperature Measuring Instrument

ISO 18326:2018/Amd 1:2021 Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct - Testing and rating for performance; Amendment 1

CENELEC - European Committee for Electrotechnical Standardization, Portable Temperature Measuring Instrument

EN 60846-2:2018 Radiation protection instrumentation – Ambient and/ or directional dose equivalent (rate) meters and/or monitors for beta@ X and gamma radiation – Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protectio

BELST, Portable Temperature Measuring Instrument

STB GOST R 50530-2002 Cartridges for portable fire-arms, firing devices of industrial and trade special purposes. Types and methods of control during safety certificating tests