ZH

RU

ES

increasing day by day

increasing day by day, Total:21 items.

In the international standard classification, increasing day by day involves: Installations in buildings.


ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., increasing day by day

ANSI - American National Standards Institute, increasing day by day

  • X9 TR-48-2018 Card-Not-Present (CNP) Fraud Mitigation in the United States: Strategies for Preventing@ Detecting@ and Responding to a Growing Threat (ASCX9)

US-CFR-file, increasing day by day

  • CFR 29-4022.24-2014 Labor. Part4022:Benefits payable in terminated single-employer plans. Section4022.24:Benefit increases.
  • CFR 17-1.23-2013 Commodity and Securities Exchanges. Part1:General regulations under the commodity exchange act. Section1.23:Interest of futures commission merchant in segregated futures customer funds; additions and withdrawals.

Underwriters Laboratories (UL), increasing day by day

  • UL 1453 BULLETIN-2008 UL Standard for Safety Electric Booster and Commercial Storage Tank Water Heaters COMMENTS DUE: MAY 1, 2008
  • UL 998 CRD-2014 UL Standard for Safety Humidifiers - Section / Paragraph Reference: New Supplement SA Subject: Smart Enabled Humidi?ers (Edition 5: April 25, 2011)
  • UL 1703 CRD-2018 UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - Subject: Add additional requirements for bifacial PV modules and panels (Edition 3: March 15@ 2002)
  • UL 588 CRD-2017 UL Standard for Safety Seasonal and Holiday Decorative Products - Section / Paragraph Reference: Supplement SD (new) Subject: Addition of String Lights for All-Year Use (Edition 19: October 26@ 2015)
  • UL 486C CRD-2014 UL Standard for Safety Splicing Wire Connectors - Section / Paragraph Reference: 1.1@ 2.1.3@ 2.1.4@ 2.1.5@ 2.1.6@ 6.3.10@ 7.15@ 8.15@ 9.15@ 10.25@ Table 8@ Annex F Subject: Addition of Plenum Requirements for Wire Connectors (Edition 6: January 11@ 2013)
  • UL 486C CRD-2016 UL Standard for Safety Splicing Wire Connectors - Section / Paragraph Reference: 1.5@ 10.4@ 10.5@ Table 2@ Table 22 Subject: Increase Voltage Ratings to 2000 Volts (Edition 6: January 11@ 2013)
  • UL 484 CRD-2017 UL Standard for Safety Room Air Conditioners - Section / Paragraph Reference: 23.2.2@ 23.4.1 Subject: Addition of reference to UL 61800-5-1 for motor protection (Edition 9: February 7@ 2014)
  • UL 514A CRD-2011 UL Standard for Safety Metallic Outlet Boxes - Section/Paragraph Reference: Subject: Addition of requirements for the evaluation of a through wall device or outlet box (Edition 10; February 16@ 2004)
  • UL 355 CRD-2017 UL Standard for Safety Cord Reels - Section / Paragraph Reference: 14.2 Subject: Addition of requirements for USB and other Supplementary Class 2 Circuits (Edition 10: June 25@ 2004)
  • UL 778 CRD-2018 UL Standard for Safety Motor-Operated Water Pumps - Section / Paragraph Reference: 41.1@ 41.2@ 55 Subject: Add DC Test Potential of Dielectric Voltage Withstand Test. (Edition 6: July 7@ 2016)
  • UL 1660 CRD-2018 UL Standard for Safety Liquid-Tight Flexible Nonmetallic Conduit - Section / Paragraph Reference: 5.10.1@ 5.10.4@ 6.1.3 and Table 9 Subject: Increase of the Wet Limitation for LFNC above 60C (Edition 5: July 2@ 2014)
  • UL 1557 CRD-2017 UL Standard for Safety Electrically Isolated Semiconductor Devices Section / Paragraph Reference: 14 Subject: Production Line Dielectric Voltage-Withstand Test –addition of dc test (Edition 5: December 29@ 2011)
  • UL 60079-7 (ND)-2008 National Differences For UL 60079-7 Explosive Atmospheres - Part 7: Equipment protection by increased safety ’e’ (Fourth Edition; Reprint with revisions through and including May 31, 2013)
  • UL 823 CRD-2018 UL Standard for Safety for Electric Heaters For Use in Hazardous (Classified) Locations - Section / Paragraph Reference: 21 Subject: Non-drying thickened mineral oil-based thread sealant (Edition 9: October 20@ 2006)
  • UL 758 CRD-2013 UL Standard for Safety Appliance Wiring Material - Section / Paragraph Reference: Revised Table 3.7@ new sections 43A and 43B Subject: Addition of optional IEC 60332 flame tests (Edition 2: April 24@ 2006)

IN-BIS, increasing day by day

German Institute for Standardization, increasing day by day

  • DIN EN IEC 61290-1-3:2023-10 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2021); German version EN IEC 61290-1-3:2021 / Note: DIN EN 61290-1-3 (2015-12) remains valid alongside this standard until 2024-04-05.




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved