ZH
RU
ES

Nominal diameter of thread

Nominal diameter of thread, Total:38 items.

In the international standard classification, Nominal diameter of thread involves: Fluid storage devices, Screw threads, Linear and angular measurements, Gears.

German Institute for Standardization, Nominal diameter of thread

• DIN 103-8:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
• DIN 103-7:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
• DIN 103-5:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
• DIN 103-6:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
• DIN 2280:2001 Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
• DIN 2281-1:2001 Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
• DIN 2281-2:2001 Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 2: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
• DIN 2281-3:2001 Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 3: "GO" workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision mechanics
• DIN 2283-3:2001 Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 3: "NOT GO" workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision mechanics
• DIN 2282-3:2001 Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 3: "GO" workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision engineering
• DIN 2283-2:2001 Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
• DIN 2284-3:2001 Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 3: "NOT GO" workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision mechanics
• DIN 2283-1:2001 Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
• DIN 2282-2:2001 Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 2: "GO" workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
• DIN 2284-2:2001 Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter

Association Francaise de Normalisation, Nominal diameter of thread

• NF E29-677:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter : 28,3 - Taper 3/25, 14 TPI SI. Gauge requirements.
• NF E29-684:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 26, taper 1/16 (3 degrees 34' ), 14 tpi npt.
• NF E29-678:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 16,4, taper 3/20, 14 TPI si.
• NF E29-682:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 34 - taper 8,732 % (5o) - Pitch 2 SI
• NF E29-682:1980 Gas cylinders. Taper screw thread for valve stem and culinder neck assembly. Nominal diameter 34 taper 8 732 per cent (5 degrees), pitch 2 si.
• NF E29-680:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 25,8, taper 3/26 (6o 38'), 14 Tpi SI
• NF E29-680:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8, taper 3/26 (6 degrees 38', 14 tpi si.
• NF E29-684:2012 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 26, Taper 1/16 (3 o 34'), 14 Tpi NPT.
• NF E29-684:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 26, Taper 1/16 (3o 34'), 14 Tpi NPT
• NF E29-679:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 16.4 - Taper 3/20, 14 TPI SI. Gauge requirements.
• NF E29-685:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 26 - Taper 1/16 (3 degrees 34'), 14 TPI NPT. Gauge requirements.
• NF E29-683:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 34 - Taper 8.736 per cent (5 degrees C), Pitch 2 SI. Gauge erquirements.
• NF E29-681:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8 - Taper 3/26 (6 degrees C 38'), 14 TPI SI. Gauge requirements.
• NF E29-676:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 28.3 mm, taper 3/25, 14 TPI, whitworth form.
• FD E29-685:2013 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly . Nominal diameter : 26 mm - Taper angle : 3o 34 min . Taper: 1/16 . Pitch (NPT): 1,814 mm - Verification requirements
• NF E29-678:2015 Gas cylinders - Thread cone for valve stem and cylinder neck assembly - Nominal diameter 16,4 - Taper 3/20 (8o 40') - Pitch 1,814 Sl
• NF E22-202:1992 Ball screws. Part 2 : nominal diameters and nominal leads. Metric series.

AIA/NAS - Aerospace Industries Association of America Inc., Nominal diameter of thread

• NASM122156-122195-1998 Insert@ Cres Helical Coil Coarse Thread@ 2 Dia Nominal Length
• NASM122076-122115-1999 Insert@ CRES Helical Coil Coarse Thread@ 1 Dia Nominal Length
• NASM122236-122275-1999 Insert@ Cres Helical Coil Coarse Thread@ 3 Dia Nominal Length
• NASM124651-124690-1998 Insert@ Cres Helical Coil Fine Thread@ 1 Dia Nominal Length

RO-ASRO, Nominal diameter of thread

• STAS 981-1974 ISO general purpose metric screw threads NOMINAL DIAMETERS AND PITCHES

SE-SIS, Nominal diameter of thread

• SIS SS 3141-1983 Blanks for screw ring gauges - Nominal diameter 1 to 100 mm

Others:   thread diameter, Nominal size Nominal diameter, Method for determining the nominal diameter of cigarettes and filters using a laser beam measuring instrument, Nominal diameter, Nominal diameter Nominal diameter, Nominal external thread diameter of the screw, Standard nominal diameter, Nominal diameter of thread, Pipe Nominal Diameter.