ZH
RU
ES

Determination of Cadmium Content in Solution by Fluorescence Method

Determination of Cadmium Content in Solution by Fluorescence Method, Total:499 items.

In the international standard classification, Determination of Cadmium Content in Solution by Fluorescence Method involves: Cereals, pulses and derived products, Powder metallurgy, Analytical chemistry, Natural gas, Fuels, Coals, Metalliferous minerals, Products of the chemical industry, Paint ingredients, Crude petroleum, Surface treatment and coating, Radiation protection, Paints and varnishes, Fertilizers, Inorganic chemicals, Organic chemicals, Paper products, General methods of tests and analysis for food products, Nuclear energy engineering, Physics. Chemistry, Leather technology, Non-metalliferous minerals, Soil quality. Pedology, Products of the textile industry, Rubber, Rubber and plastics products, Wastes, Petroleum products in general, Meat, meat products and other animal produce, Sugar. Sugar products. Starch, Water quality, Non-ferrous metals, Ceramics, Radiation measurements, Lubricants, industrial oils and related products, Farming and forestry, Pulps, Non-destructive testing, Laboratory medicine, Fruits. Vegetables, Electronic components in general, Vocabularies, Conducting materials, Beekeeping, Air quality, Testing of metals, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Insulating fluids, Pesticides and other agrochemicals, Semiconducting materials, Animal feeding stuffs, Food products in general, Environmental protection, Electrical engineering in general, Equipment for entertainment, Jewellery, Veterinary medicine, Ferrous metals, Road vehicle systems, Waxes, bituminous materials and other petroleum products, Materials and articles in contact with foodstuffs, Refractories, Biology. Botany. Zoology, Ferroalloys.


Professional Standard - Commodity Inspection, Determination of Cadmium Content in Solution by Fluorescence Method

  • SN/T 2680-2010 Determination of arsenic,mercury,cadmium,lead,bismuth in iron ores.Atomic fluorescence spectrometric method
  • SN/T 3370-2012 Determination of arsenic,mercury in tungsten ore.Atomic fluorescence spectrometric method
  • SN/T 3349-2012 Determination of mercury content in gold ores.Atomic fluorescence spectrometry
  • SN/T 2092-2008 Determination of selenium content in antimony ingot for import and export.Atomic fluorescence spectrometric method
  • SN/T 4364-2015 Determination of mercury in export-import copper concentrates.Atomic fluorescence spectrometry
  • SN/T 3520-2013 Determination of mercury in rubber and rubber products.Atomic fluorescence spectrometric method
  • SN/T 1910-2007 Determination of mercury content in paper used for cigarettes for import-export-Atomic fluorescence spectrometry
  • SN/T 3012-2011 Determination of tungsten trioxide in tungsten ores.X-ray fluorescence spectrometry
  • SN/T 3377-2012 Determination of lead in paints.Semiquantitative screening by energy dispersive X-ray fluorescence spectrometric method
  • SN/T 1841-2006 Determination of cadmium in toy materials. Flame atomic absorption spectrometry
  • SN/T 3534-2013 Determination of arsenic and antimony released from enamel and glass container.Atomic fluorescence spectrometry
  • SN/T 1325.2-2003 Determination of cadmium content of barites for import and export-Atomic absorption spectrometric method
  • SN/T 2267-2009 Determination of cadmium in rubber and rubber products.Atomic absorption spectrometry
  • SN/T 3604-2013 Determination of copper, silicon, manganese, zinc, aluminum and iron in zinc concentrate ore.X-ray fluorescence spectrometry
  • SN/T 2765.3-2013 Simultaneous determination of arsenic and mercury in iron ore by microwave digestion-atomic fluorescence spectrometry
  • SN/T 2679-2010 Determination of arsenic in wood and wood-based products.Hydride generation-atomic fluorescence spectrometry
  • SN/T 2003.3-2006 Determination of Lead, Mercury, Chromium, Cadmium and Bromine in electrical and electronic equipments - Part 3: Qualitative screening by X-ray fluorescence spectrometric method
  • SN/T 3346-2012 Determination of silicon,manganese,phosphorus,chromium,vanadium in chrome-vanadium steel.Wave dispersive X-ray fluorescence spectrometry
  • SN/T 3521-2013 Simultaneous determination of arsenic and mercury content in coal.Hydride generation-atomic fluorescence spectrometry
  • SN/T 2003.5-2006 Determination of lead,mercury,chromium,cadmium and bromine in electrical and electronic equipment-Part 5:Quantitative screening by energy dispersive X-ray fluorescence spectrometric method
  • SN/T 3347-2012 Determination of silicon,manganese,phosphorus,chromium and titanium in chrome-manganese-titanium steel.Wave dispersive X-ray fluorescence spectrometry
  • SN/T 3348-2012 Determination of silicon,manganese,phosphorus,chromium,nickel and tungsten in chrome-nickel-tungsten steel.Wave-length dispersive X-ray fluorescence spectrometry
  • SN/T 2950-2011 Determination of silicon, aluminum, calcium, iron, phosphorus, chromium, titanium content in export rare earth magnesium ferrosilicon X-ray fluorescence spectrometry
  • SN/T 2003.4-2006 Determination of lead, mercury, chromium, cadmium and bromine in electrical and electronic equipment. Part 4: Qualitative screening by energy dispersive X-ray fluorescence spectrometric method
  • SN/T 3941-2014 Food contact materials.Metal materials.Determination of lead, cadmium, arsenic and antimony migration.Hydride generation atomic fluorescence spectrometry method
  • SN/T 3916-2014 Determination of molybdenum, iron, lead, copper, silicon, calcium in molybdenum concentrates by X-ray fluorescence spectrometry
  • SN/T 2765.4-2014 Determination of arsenic content in iron ores for import and export.Part 4:Hydride generation atomic fluorescence spectrometric method
  • SN/T 3134-2012 Determination of thimerosal residues in foodstuffs of animal origin for export.Liquid chromatogram-atomic fluorescence spectrometry(LC-AFS)method
  • SN/T 1653-2005 Determination of lead、cadmium content in leather and leather products for import and export--Fire atomic absorption spectrometric method
  • SN/T 0561-2013 Determination of acid-soluble iron content in import & export natural scale graphite.Atomic absorption spectrometric method
  • SN/T 4365-2015 Determination of copper, lead, chromium, arsenic, silver, antimony, bismuth, nickel, iron, aluminum element content in copper concentrates Wavelength dispersive X-ray fluorescence spectrometry
  • SN/T 2056-2008 Determination of lead,arsenic,cadmium,copper,iron content in tea for import and export.Inductively coupled plasma atomic emission spectrometric method
  • SN/T 1504.5-2005 Plastics used for food container and package - Part 5: Determination of elemental content in polyolefins - X ray fluorescence spectrometry

German Institute for Standardization, Determination of Cadmium Content in Solution by Fluorescence Method

  • DIN 25703:1993 Determination of the uranium and plutonium content in nitric acid solutions by wavelength dispersive X-ray fluorescence analysis
  • DIN 25711:1996-06 Determination of the <(hoch)232>U isotopic content in uranium containing nuclear fuel solutions by <alpha> spectrometry
  • DIN EN 17178:2018 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy; German and English version prEN 17178:2018
  • DIN EN 17178:2019 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
  • DIN EN 17178:2019-12 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy; German version EN 17178:2019
  • DIN 25704:1993 Determination of the plutonium content in sulphuric and nitric acid solutions; potentiometric titration method with potassium dichromate
  • DIN ISO 4883:1991 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; solution method; identical with ISO 4883:1978
  • DIN EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel - Wavelength dispersive X-ray fluorescence spectrometric method
  • DIN EN 16997:2017-10 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel - Wavelength dispersive X-ray fluorescence spectrometric method; German version EN 16997:2017
  • DIN EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004); German version EN ISO 20847:2004
  • DIN EN 14981:2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC; English version of DIN EN 14981:2006-12
  • DIN EN ISO 20846:2019 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
  • DIN EN 13723:2002-10 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF); German version EN 13723:2002
  • DIN EN ISO 20884:2019 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019)
  • DIN 50451-1:2003 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 1: Silver (Ag), gold (Au), calcium (Ca), copper (Cu), iron (Fe), potassium (K) and sodium (Na) in nitric acid by AAS
  • DIN 10473:1997-12 Determination of acid soluble <beta>-lactoglobulin content of heat-treated milk - Reversed phase, high performance liquid chromatographic method
  • DIN EN 13723:2002 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF); German version EN 13723:2002
  • DIN 25490:1989 Determination of the uranium content in nuclear grade uranium hexafluoride, uranyl fluoride solutions, uranyl nitrate solutions, uranium oxide, uranium dioxide, powder and pellets; gravimetric method
  • DIN EN 14981:2006-12 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC; German version EN 14981:2006
  • DIN 51865-3:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 3: Absorption in solutions, atomic absorption spectrometry (AAS)
  • DIN ISO 8691:2010-09 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994)
  • DIN EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011); German version EN ISO 20884:2011
  • DIN ISO/TS 14256-1:2003 Soil quality - Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride solution - Part 1: Manual method (ISO/TS 14256-1:2003)

Professional Standard - Grain, Determination of Cadmium Content in Solution by Fluorescence Method

  • LS/T 6115-2016 Inspection of grain and oils.Rapid determination of cadmium in rice.X-ray fluorescence spectrometry

KR-KS, Determination of Cadmium Content in Solution by Fluorescence Method

  • KS D ISO 4883-2003(2023) Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method
  • KS M 1811-2008(2023) Test methods for determination of mercury in fluorescent lamps
  • KS M ISO 3856-4-2022 Paints and varnishes — Determination of “soluble” metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
  • KS M ISO 3856-6-2022 Paints and varnishes — Determination of “soluble” metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method
  • KS M ISO 3856-5-2017 Paints and varnishes－Determination of “soluble” metal content－Part 5：Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form－Diphenylcarbazi
  • KS M ISO 3856-7-2022 Paints and varnishes — Determination of “soluble” metal content — Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid of water-dilutable paints — Flameless a

Professional Standard - Aviation, Determination of Cadmium Content in Solution by Fluorescence Method

  • HB/Z 5085.1-1999 Analytical method of cadmium electroplating solution in cyanide electroplating EDTA volumetric method to determine the content of cadmium oxide
  • HB/Z 5085.7-1999 Analytical method of cadmium electroplating solution in cyanide electroplating Atomic absorption spectrometry Determination of iron content
  • HB/Z 5085.8-1999 Analytical method of cadmium electroplating solution in cyanide plating Determination of copper content by atomic absorption spectrometry
  • HB/Z 5086.9-2000 Analytical method of copper cyanide electroplating solution Determination of zinc and cadmium content by atomic absorption spectrometry
  • HB/Z 5109.5-2001 Analysis method for passivation solution Determination of nitric acid in zinc plating, cadmium plating triacid passivation solution through potentiometric titration
  • HB/Z 5109.8-2001 Analysis method for passivation solution Determination of nitric acid in zinc plating, cadmium plating nitric acid passivation solution through potentiometric titration
  • HB/Z 5109.7-2001 Analysis method for passivation solution Determination of sodium sulfate in zinc plating, cadmium plating nitric acid passivation solution
  • HB/Z 5109.1-2001 Analysis method for passivation solution Determination of sodium bichromate content in zinc plating, cadmium plating diacid passivation solution through potentiometric titration
  • HB/Z 5109.3-2001 Analysis method for passivation solution Determination of chromium trioxide in zinc plating, cadmium plating triacid passivation solution through potentiometric titration
  • HB/Z 5109.6-2001 Analysis method for passivation solution Determination of sodium bichromate content in zinc plating, cadmium plating nitric acid passivation solution through potentiometric titration
  • HB/Z 5099.8-2000 Analytical method of silver electroplating solution Determination of antimony content in hard silver plating solution by atomic absorption spectrometry
  • HB/Z 5085.5-1999 Analytical method for cyanide electroplating cadmium solution Determination of nickel sulfate content by EDTA volumetric method
  • HB/Z 5099.7-2000 Analysis method for silver plating solution Determination of iron, copper contents in silver plating solution through atomic absorption spectrometry
  • HB/Z 5085.4-1999 Analytical method of cadmium electroplating solution for cyanide electroplating Determination of sodium carbonate content by potentiometric titration
  • HB/Z 5085.6-1999 Analytical method for cadmium cyanide electroplating solution Determination of sodium sulfate content by precipitation titration
  • HB/Z 5085.2-1999 Analytical method of cadmium electroplating solution for cyanide electroplating Determination of sodium cyanide content by potentiometric titration
  • HB/Z 5085.3-1999 Analytical method of cyanide electroplating cadmium solution Potentiometric titration for determination of sodium hydroxide content
  • HB/Z 5099.1-2000 Analytical method of electroplating silver solution Potentiometric titration determination of silver content in electroplating silver solution
  • HB/Z 5099.4-2000 Analysis method for silver plating solution Determination of potassium carbonate content in hard silver solution through potentiometric titration
  • HB/Z 5099.2-2000 Analytical method of electroplating silver solution Potentiometric titration determination of potassium cyanide in electroplating silver solution
  • HB/Z 5099.3-2000 Analytical method of electroplating silver solution Potentiometric titration determination of potassium carbonate content in electroplating silver solution
  • HB/Z 5109.11-2001 Analysis method for passivation solution Determination of sodium chloride content in copper plating passivation solution through potentiometric titration
  • HB/Z 5109.16-2001 Analysis method for passivation solution Determination of potassium nitrate content in silver plating passivation solution through potentiometric titration
  • HB/Z 5099.5-2000 Analytical method of electroplating silver solution Potentiometric titration determination of potassium hydroxide content in hard silver plating solution
  • HB/Z 5109.14-2001 Analysis method for passivation solution Determination of sodium chloride content in brass plating passivation solution through potentiometric titration
  • HB/Z 5109.15-2001 Analysis method for passivation solution Determination of potassium bichromate content in silver plating passivation solution through potentiometric titration
  • HB/Z 5109.9-2001 Analysis method for passivation solution Determination of chromium trioxide content in copper plating passivation solution through potentiometric titration
  • HB/Z 5099.6-2000 Analytical method of electroplating silver solution Potentiometric titration determination of potassium sodium tartrate content in hard silver plating solution
  • HB/Z 5091.5-1999 Analysis method for chrome plating solution Determination of ferrous content through atomic absorption spectrometry
  • HB/Z 5091.6-1999 Analysis method for chrome plating solution Determination of copper content through atomic absorption spectrometry
  • HB/Z 5088.6-1999 Analytical method of electroplating nickel solution Determination of copper content by atomic absorption spectrometry
  • HB/Z 5088.5-1999 Analysis method for nickel plating solution Determination of ferrous content through atomic absorption spectrometry
  • HB/Z 5109.12-2001 Analysis method for passivation solution Determination of sodium bichromate content in brass plating passivation solution through potentiometric titration
  • HB/Z 5087.6-2004 Methods for analysis of acid plating copper solutions part 6:Determination of arsenic content by spectrophotometric method
  • HB/Z 5105.1-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
  • HB/Z 5105.3-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Sulfuric Acid and Phosphoric Acid
  • HB/Z 5086.7-2000 Analytical method of copper cyanide electroplating solution Determination of lead content by atomic absorption spectrometry
  • HB/Z 5086.8-2000 Analytical method of copper cyanide electroplating solution Determination of silver content by atomic absorption spectrometry
  • HB/Z 5093.6-2000 Analytical method of alkaline electroplating tin solution Determination of lead content by atomic absorption spectrometry
  • HB/Z 5093.7-2000 Analytical method of alkaline electroplating tin solution Determination of copper content by atomic absorption spectrometry
  • HB/Z 5084.5-2000 Analytical method of cyanide electroplating zinc solution - Determination of iron content by atomic absorption spectrometry
  • HB/Z 5084.6-2000 Analytical method of cyanide electroplating zinc solution - Determination of copper content by atomic absorption spectrometry
  • HB/Z 5105.2-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
  • HB/Z 5107.17-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 17:Determination of nitric acid content in nitric acid oxidation solution by potentiometric method
  • HB/Z 5107.1-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 1:Determination of sodium fluoride content in sodium fluoride oxidation solution by EDTA volumetric method
  • HB/Z 5107.2-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 2:Determination of sodium fluoride content in sodium fluoride oxidation solution by depositive titrimetric method
  • HB/Z 5107.7-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 7:Determination of glacial acetic acid content in glacial acetic acid oxidation solution by potentiometric method
  • HB/Z 5107.9-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 9:Determination of chlorine content in glacial acetic acid oxidation solution by potentiometric method
  • HB/Z 5107.16-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 16:Determination of potassium bichromate content in nitric acid oxidation solution by potentiometric method
  • HB/Z 5107.4-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 4:Determination of aluminum potassium sulfate content in aluminum potassium sulfate oxidation solution by EDTA volumetric method
  • HB/Z 5107.8-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 8:Determination of ammonia sulfate content in glacial acetic acid oxidation solution by barium sulfate gravimetric method
  • HB/Z 5107.5-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 5:Determination of glacial acetic acid content in aluminum potassium sulfate oxidation solution by potentiometric method
  • HB/Z 5107.6-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 6:Determination of potassium bichromate content in glacial acetic acid oxidation solution by potentiometric method
  • HB/Z 5087.4-2004 Methods for analysis of acid plating copper solutions part 4:Determination of iron content by atomic absorption spectrometric method
  • HB/Z 5094.3-2004 Methods for analysis of acid plating tin solutions-Part 3:Determination of lead content by atomic absorption spectrometric method
  • HB/Z 5094.4-2004 Methods for analysis of acid plating tin solutions-Part 4:Determination of copper content by atomic absorption spectrometric method
  • HB/Z 5087.7-2004 Methods for analysis of acid plating copper solutions part 7:Determination of antimony content by atomic absorption spectrmetric method
  • HB/Z 5107.3-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 3:Determination of potassium bichromate content in aluminum potassium sulfate oxidation solution by potentiometric method
  • HB/Z 5107.18-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 18:Determination of ammonium chloride (sodium chloride)content in nitric acid oxidation solution by potentiometric method
  • HB/Z 5087.5-2004 Methods for analysis of acid plating copper solutions part 5:Determination of nickel sulfate content by atomic absorption spectrometric method
  • HB/Z 5107.11-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 11:Determination of sodium bichromate content in sodium bichromate and magnesium sulfate oxidation solution by potentiometric method
  • HB/Z 5107.12-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 12:Determination of potassium bichromate content in potassium bichromate and magnesium sulfate oxidation solution by potentiometric method
  • HB/Z 5107.14-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 14:Determination of ammonia sulfate content in potassium bichromate and magnesium sulfate oxidation solution by potentiometric method
  • HB/Z 5107.10-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 10:Continual determination of manganese sulfate and magnesium sulfate content in sodium bichromate and magnesium sulfate oxidation solution by EDTA volumetric method
  • HB/Z 5107.15-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 15:Continual determination of manganese sulfate and magnesium sulfate content in potassium bichromate and magnesium sulfate oxidation solutin by EDTA volumetric method

Korean Agency for Technology and Standards (KATS), Determination of Cadmium Content in Solution by Fluorescence Method

  • KS D ISO 4883-2003(2018) Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method
  • KS D ISO 4883:2003 Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method
  • KS I ISO 11263:2008 Soil quality-Determination of phosphorus-Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
  • KS M ISO 20846:2012 Petroleum products－Determination of sulfur content of automotive fuels－Ultraviolet fluorescence method
  • KS M ISO 14597:2003 Petroleum products－Determination of vanadium and nickel content－Wavelength-dispersive X-ray fluorescence spectrometry
  • KS M ISO 3856-4:2007 Paints and varnishes－Determination of “soluble” metal content－Part 4：Determination of cadmium content－Flame atomic absorption spectrometric method and polarographic method
  • KS M ISO 3856-4-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 4：Determination of cadmium content－Flame atomic absorption spectrometric method and polarographic method
  • KS M ISO 3856-4:2022 Paints and varnishes — Determination of “soluble” metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
  • KS M ISO 3856-6:2007 Paints and varnishes－Determination of “soluble” metal content－Part 6：Determination of total chromium content of the liquid portion of the paint－Flame atomic absorption spectrometric method
  • KS E ISO 15249:2011 Zinc sulfide concentrates－Determination of gold content－Acid dissolution/solvent extraction/flame atomic absorption spectrometric method
  • KS M ISO 3856-5:2007 Paints and varnishes－Determination of “soluble” metal content－Part 5：Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form－Diphenylcarbazide spectrophotometric method
  • KS M ISO 3856-6:2022 Paints and varnishes — Determination of “soluble” metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method
  • KS M ISO 3856-6-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 6：Determination of total chromium content of the liquid portion of the paint－Flame atomic absorption spectrometric method
  • KS M ISO 3856-7-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 7：Determination of mercury content of the pigment portion of the paint and of the liquid of water-dilutable paints－Flameless atomic a
  • KS I ISO 9855-2005(2020) Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS L ISO 20565-1-2012(2017) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents, dissolution and determination of grav
  • KS L ISO 20565-1-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents, dissolution and determination of grav
  • KS M ISO 3856-7:2022 Paints and varnishes — Determination of “soluble” metal content — Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid of water-dilutable paints — Flameless a
  • KS I ISO 14256-1:2009 Soil quality-Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution-Part 1:Manual method

Yunnan Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB53/T 550-2014 Determination of lead, arsenic, cadmium, iron, manganese in calcium hydrogen phosphate energy dispersive X-ray fluorescence spectrometry
  • DB53/T 898-2018 Determination of Germanium Content in Coal by Atomic Fluorescence Spectrometry
  • DB53/T 549-2014 Determination of phosphorus and arsenic content in industrial yellow phosphorus Energy dispersive X-ray fluorescence spectrometry
  • DB53/T 918-2019 Determination of sulfuric acid content in ferric zinc sulfate solution by acid-base titration
  • DB53/T 375-2012 Determination of lead content in the leachate of rubber blood transfusion hose-Graphite furnace atomic absorption spectrometry
  • DB53/T 793-2016 Determination of arsenic, cadmium, cobalt, chromium, copper, mercury, manganese, nickel, lead, antimony and zinc in fertilizers by inductively coupled plasma optical emission spectrometry (ICP-OES)

Danish Standards Foundation, Determination of Cadmium Content in Solution by Fluorescence Method

  • DS/EN 24883:1994 Hardmetals - Determination of contents of metallic elements by x-ray fluorescence - Solution method
  • DS/ISO 4883:1994 Hardmetals - Determination of contents of metallic elements by x-ray fluorescence - Solution method
  • DS/EN 24883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
  • DS/EN ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
  • DS/ISO 3856/4:1982 Paints and varnishes. Determination of "soluble" metal content. Part 4: Determination of cadmium content. Flame atomic absorption spectroscopic method and polarographic method
  • DS/EN ISO 20847:2004 Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
  • DS/ISO 3856/6:1982 Paints and varnishes. Determination of "soluble" metal content. Part 6: Determination of the total chromium content of the liquid portion of the paint. Flame atomic absorption spectroscopic method
  • DS/EN 13723:2003 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray flourescence spectrometry (XRF)
  • DS/EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
  • DS/EN 14981:2007 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
  • DS/ISO 3856/5:1982 Paints and varnishes. Determination of "soluble" metal content. Part 5: Determination of hexavalent chromium content of the pigment and extender portion of the paint. Diphenylcarbazide spectrophotometric method
  • DS/EN 14078:2010 Liquid petroleum products - Determination of fatty methyl ester (FAME) content in middle distillates - Infrared spectrometry method
  • DS/EN ISO 20565-1:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica

Sichuan Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB51/T 1689-2013 Determination of total sulfur content in liquefied natural gas (LNG) by ultraviolet fluorescence method
  • DB51/T 1699-2013 Determination of total sulfur content in liquefied petroleum gas (LPG) by ultraviolet fluorescence method
  • DB51/T 2181-2016 Determination of Phosphorus in Gasoline by Wavelength Dispersive X-ray Fluorescence Spectrometry

International Organization for Standardization (ISO), Determination of Cadmium Content in Solution by Fluorescence Method

  • ISO 4883:1978 Hardmetals; Determination of contents of metallic elements by X-ray fluorescence; Solution method
  • ISO 9779:1993 Metallurgical-grade fluorspar; determination of lead content; solvent extraction atomic absorption spectrometric method
  • ISO 9504:1993 Metallurgical-grade fluorspar; determination of antimony content; solvent extraction atomic absorption spectrometric method
  • ISO 11263:1994 Soil quality - Determination of phosphorus - Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
  • ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
  • ISO 20846:2019 Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method
  • ISO 2226:1972 Formaldehyde solutions for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method
  • ISO 3856-4:1984 Paints and varnishes; Determination of "soluble" metal content; Part 4 : Determination of cadmium content; Flame atomic absorption spectrometric method and polarographic method
  • ISO 3856-4:1980 Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectroscopic method and polarographic method
  • ISO 8299:1993 Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method
  • ISO 3856-6:1984 Paints and varnishes; Determination of "soluble" metal content; Part 6 : Determination of total chromium content of the liquid portion of the paint; Flame atomic absorption spectrometric method
  • ISO 3856-5:1984 Paints and varnishes; Determination of "soluble" metal content; Part 5 : Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form; Diphenylcarbazide spectrophotometric method
  • ISO 3856-7:1984 Paints and varnishes; Determination of "soluble" metal content; Part 7 : Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints; Flameless atomic absorption spectrometric method
  • ISO 3856-6:1980 Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectroscopic method
  • ISO 6918:1984 Crude sodium borates for industrial use; Determination of total and alkali-soluble calcium and magnesium contents; Flame atomic absorption spectrometric method
  • ISO/TS 14256-1:2003 Soil quality - Determination of nitrate, nitrite and ammonium in field-moist-soils by extraction with potassium chloride solution - Part 1: Manual method

国家市场监督管理总局、中国国家标准化管理委员会, Determination of Cadmium Content in Solution by Fluorescence Method

  • GB/T 6730.79-2019 Iron ores—Determination of cadmium content—Hydride generation-atomic fluorescence spectrometric method
  • GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products—Energy dispersive X-ray fluorescence spectrometry
  • GB/T 40486-2021 Determination of melittin content in bee venom powder—High performance liquid chromatography
  • GB/T 37883-2019 Determination of chromium, cadmium, lead and arsenic in water treatment chemicals—Inductively coupled plasma atomic emission spectrometry
  • GB/T 6324.11-2021 Test method of organic chemical products—Part 11：Determination of trace arsenic in liquid products—Atomic fluorescence spectrometric method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination of Cadmium Content in Solution by Fluorescence Method

  • GB/T 33401-2016 Determination of the urea in liquid fluorescent whitening agent products
  • GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry
  • GB/T 35996-2018 Rapid determination of eight elements content for phosphate rock and concentrate—X-ray fluorescence spectrometry
  • GB/T 34100-2017 Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,diesel engine fuel, and engine oil—Ultraviolet fluorescence method
  • GB/T 35867-2018 Inspection of grain and oils—Determination of phospholipids content in lecithins—high performance liquid chromatography using a light-scattering detector

Professional Standard - Petroleum, Determination of Cadmium Content in Solution by Fluorescence Method

  • SY/T 0528-2008 Determination of arsenic in crude petroleum.Atomic fluorescence spectrometry

Professional Standard - Nuclear Industry, Determination of Cadmium Content in Solution by Fluorescence Method

  • EJ/T 296.2-2014 Determination of trace uranium in urine liquid fluorometry by ultraviolet
  • EJ/T 754-1993 Determination of Trace Selenium in Uranium-bearing Rocks by Atomic Fluorescence Spectrometry
  • EJ/T 1149-2001 Determination of trace Bismuth and Mercury in uranitte mineral by hydride and double channal atomic fluorescence instrument

Fujian Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB35/T 896-2009 Determination of Basic Rose T in Food by Liquid Chromatography-Fluorescence Detection
  • DB35/T 1351-2013 Determination of total sulfur content in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence method
  • DB35/T 75-1996 Determination of gold content in gold jewelry (X-fluorescence spectroscopy)

Lithuanian Standards Office , Determination of Cadmium Content in Solution by Fluorescence Method

  • LST EN 24883-2001 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978)
  • LST EN ISO 20846:2012 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
  • LST EN 13723-2002 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
  • LST EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
  • LST EN 14981-2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
  • LST EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)
  • LST EN 14078-2010 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method

Association Francaise de Normalisation, Determination of Cadmium Content in Solution by Fluorescence Method

  • NF T30-216:1981 Paints and varnishes. Determination of "soluble" metal content. Determination of soluble cadmium content. Flame atomic absorption spectroscopic and polarographic methods.
  • NF EN 17178:2019 Produits pétroliers liquides - Détermination de la teneur en soufre volatil dans les gaz de pétrole liquéfiés par spectroscopie de fluorescence ultra-violette
  • NF M41-027*NF EN 17178:2019 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
  • NF M60-406:2009 Nuclear energy - Nuclear fuel technology - Determination of plutonium in nitric acid solutions by spectrophotometry.
  • NF M60-406*NF EN ISO 9463:2021 Nuclear Energy - Nuclear Fuel Technology - Determination of plutonium in nitric acid solutions by spectrophotometry
  • NF M60-405:1998 Determination of plutonium in pure plutonium nitrate solutions. Gravimetric method.
  • NF X43-027:1993 Air quality. Ambient air. Determination of lead in aerosols X-ray fluorescence spectrometry.
  • NF M07-109*NF EN ISO 20846:2019 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
  • NF M60-405*NF ISO 8425:2014 Nuclear fuel technology - Determination of plutonium in pure plutonium nitrate solutions - Gravimetric method
  • NF M07-166*NF EN 16997:2017 Liquid petroleum product - Determination of the sulfur content in Ethanol (E85) automobile fuel - Wavelength dispersive X-ray fluorescence spectrometric method
  • NF EN 16997:2017 Produits pétroliers liquides - Détermination de la teneur en soufre dans carburant éthanol pour automobiles (E85) - Méthode spectrométrique par fluorescence de rayons X dispersive en longueur d'onde
  • NF G52-216:1976 Leathers and hides. Chemical testing of leather. Determination of chromium in soluble substances (spectrophotometric method).
  • NF M07-111*NF EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry.
  • NF M07-082*NF EN 13723:2003 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
  • NF M07-111*NF EN ISO 20884:2019 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
  • NF EN ISO 20884:2019 Produits pétroliers - Détermination de la teneur en soufre des carburants pour automobiles - Spectrométrie de fluorescence de rayons X dispersive en longueur d'onde
  • NF X43-019:1983 Atmospheric pollution. Determination of the sulphur dioxide content of the ambient air by means of ultraviolet fluorescence.
  • XP M07-113:2003 Produits pétroliers - Détermination de la teneur en traceur Solvent Yellow 124 dans les distillats moyens - Méthode par chromatographie liquide à haute performance avec détection par spectrophotométrie UV-Visible
  • NF M07-038:1968 Liquid fuels. Determination of the sodium content in petroleum products (flame photometry method).
  • XP M07-115:2003 Petroleum products - Determination of Solvent Yellow 124 content in middle distillates - Method by extraction with hydrochloric acid and determination by UV-Visible spectrophotometry
  • NF EN 13723:2003 Produits pétroliers - Détermination des faibles teneurs en plomb dans les essences pour moteurs - Spectrométrie de fluorescence de rayons X dispersive en longueur d'onde (FRX)
  • NF EN ISO 20565-1:2009 Analyse chimique des produits réfractaires contenant du chrome et des matières premières contenant du chrome (méthode alternative à la méthode par fluorescence de rayons X) - Partie 1 : appareillage, réactifs, mise en solution et détermination ...
  • NF V18-214:2007 Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion.
  • NF EN 14981:2007 Agents de surface - Détermination de la teneur en solvants à point d'ébullition élevé dans les détergents liquides par chromatographie en phase gazeuse
  • NF EN 14078:2015 Produits pétroliers liquides - Détermination de la teneur en esters méthyliques d'acides gras (EMAG) des distillats moyens - Méthode par spectrométrie infrarouge
  • NF V03-064*NF EN 15763:2010 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion.
  • NF M07-084:1995 Liquid fuels. Determinatio of colza methyl ester content in middle distillate. Method by infrared spectroscopy.
  • NF C05-100-3-1*NF EN 62321-3-1:2014 Determination of certain substances in electrotechnical products - Part 3-1 : screening - Lead, mercury, cadmium, total chromium and total bromine using X-ray Fluorescence Spectrometry
  • NF EN ISO 8299:2021 Technologie du combustible nucléaire - Détermination de la teneur isotopique et de la concentration d'uranium et du plutonium dans les matières nucléaires en solution d'acide nitrique par spectrométrie de masse à thermo-ionisation
  • NF EN ISO 10058-1:2009 Analyse chimique des produits de magnésie et de dolomie (méthode alternative à la méthode par fluorescense de rayons X) - Partie 1 : appareillage, réactifs, mise en solution et détermination de la teneur en silice par gravimétrie

European Committee for Standardization (CEN), Determination of Cadmium Content in Solution by Fluorescence Method

  • EN 24883:1993 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; solution method (ISO 4883:1978)
  • EN ISO 20846:2019 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
  • EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
  • EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
  • EN 14981:2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
  • EN ISO 20884:2019 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019)
  • EN ISO 20884:2019/A1:2021 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1 (ISO 20884:2019/Amd 1:2021)
  • EN 14332:2004 Foodstuffs - Determination of trace elements - Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion
  • EN ISO 20884:2004 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry ISO 20884:2004; [Use: IP 497/2009]
  • EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
  • EN ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica

NL-NEN, Determination of Cadmium Content in Solution by Fluorescence Method

  • NEN-ISO 4883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method (ISO 4883:1978)
  • NEN 2037-1982 Air quality — Reference method for the determination of ozone in air — Photometric determination after absorption in potassium iodide thiosulphate solution
  • NEN 6653-1992 Water - Photometric determination of the content of dissolved nitrite by continuous flow analysis
  • NEN 6652-1992 Water- Photometric determination of the sum of the contents of dissolved nitrate and nitrite by continuous flow analysis

Group Standards of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • T/SDAQI 059-2021 Determination of Selenium and Stibium in Fertilizer by Atomic Fluorescence Spectrometry
  • T/NAIA 0133-2022 Determination of Mercury in Industrial Sulfuric Acid - Atomic Fluorescence Spectrophotometry
  • T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
  • T/KJFX 002-2017 Rapid Determination of Cadmium in Rice and Its Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • T/CNFAGS 6-2023
  • T/QAS 017-2020 Determination of K, Na, Ca, Mg Content in Potassium Chloride X-ray Fluorescence Spectrometry
  • T/NAIA 0223-2023 Determination of mercury content in industrial sulfur by microwave digestion-atomic fluorescence photometry
  • T/GXAS 475-2023 Determination of soluble silica content in sugarcane juice—spectrophotometric method
  • T/SDAQI 064-2021 Determination of urea content in diesel engines NOx reduction agent - Aqueous urea solution by refractive index
  • T/CEC 423-2020 Determination of Sulfur, Phosphorus and Chlorine Content in Mineral Insulating Oils and Lubricating Oils Energy-dispersive X-ray Fluorescence Spectrometry
  • T/GXAS 126-2020 X-ray fluorescence spectrometry for the determination of iron, calcium, Silicon, titanium, magnesium, phosphorus, manganese and aluminum in red clay refined iron powder

PL-PKN, Determination of Cadmium Content in Solution by Fluorescence Method

  • PN H04239-1992 Chemical analysis of hardmetals. Determination of tantalum, niobium, cobalt, titanium and tungsten contents in solutions of samples by X-ray fluorescence spectrometry
  • PN-EN 17178-2020-01 P Liquid petroleum products--Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
  • PN A86786-1990 Raw materials and products of fish and aquatic invertebrates Determination of histamine content by fluorometric method
  • PN A86787-1991 Raw materials and products of fish and aquatic invertebrates.Determination of cadmium content flame atomic absorption spectrometric method
  • PN C04586-04-1990 Water and waste water Test for iron Determination of totaliron and total dissolved iron by spectrophotometric method with disodium bathophenantrolinedisulphonate or with 1,10 phenanthroline

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • GB/T 16781.2-1997 Natural gas--Determination of mercury--Cold atomic fluorescent spectrophotometry
  • GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
  • GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
  • GB/T 23215-2008 Determination of paralytic shellfish posion in shellfish.HPLC-fluorescence detection method
  • GB/T 18932.14-2003 Method for the determination of benzaldehyde residues in honey-HPLC-fluorescence detection method
  • GB/T 23841-2009 General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
  • GB/T 23841-2009"> General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
  • GB/T 23841-2009 General method for the determination of cadmium in inorganic chemical products by atomic absorption spectrophotometry
  • GB 9758.4-1988 Paints and varnishes - Determination of "soluble" metal content - Part 4: Determination of cadmium content by flame atomic absorption spectrometry and polarography
  • GB/T 9758.4-1988 Paints and varnishes--Determination of "soluble" metal content--Part 4:Determination of cadmium content--Flame atomic absorption spectrometric method and polarographic method
  • GB/T 18932.13-2003 Method for the determination of phenol residues in honey-HPLC-fluorescence detection method
  • GB/T 20745-2006 Method for the determination of decoquinate residues in livestork and poultry muscles LC-fluorescence detection method
  • GB 9758.6-1988 Paints and varnishes - Determination of "soluble" metal content - Part 6: Determination of total chromium content in the liquid part of paints by flame atomic absorption spectrometry
  • GB/T 9758.6-1988 Paints and varnishes--Determination of "soluble" metal content--Part 6:Determination of total chromium content of the liquid portion of the paint--Flame atomic absorption spectrometric method
  • GB/T 13551-1995 Phosphate rock and concentrate--Determination of cadmium oxide content--Flame atomic absorption sepctrometric method
  • GB/T 18932.12-2002 Method for the determination of potassium,sodium,calcium,magnesium,zinc,iron,copper,manganese,chromium,lead,cadmium contents in honey--Atomic absorption spectrometry
  • GB/T 25228-2010 Inspection of grain and oil.Determination of fumonisins in corn and its products by high liquid chromatography and fluorometer with immunoaffinity column cleanup
  • GB 9758.5-1988 Paints and varnishes - Determination of "soluble" metal content - Part 5: Determination of hexavalent chromium content in the pigment part of liquid paints or in powder paints by diphenylcarbazide spectrophotometric method
  • GB/T 9758.5-1988 Paints and varnishes--Determination of "soluble" metal content--Part 5:Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form--Diphenylcarbazide spectro
  • GB/T 20361-2006 Determination of malachite green and gentian violet residues in fishery products. High performance liquid chromatography with fluorescence detector
  • GB/T 32602-2016 Determination of migratable antimony, barium, cadmium, chromium and lead in toy materials.Graphite furnace atomic absorption spectrometry
  • GB/T 31926-2015 Zinc and aluminum based coatings on steel sheets and strips.Determination of lead,cadmium and chromium contens.Glow discharge atomic emission spectrometry method
  • GB/T 25963-2022 Determination of aromatic hydrocarbon types in middle distillates containing fatty acid methyl esters—High performance liquid chromatography method with refractive index detection
  • GB/T 25963-2010 Determination of aromatic hydrocarbon types in middle distillates containing fatty acid methyl esters.High performance liquid chromatography method with refractive index detection
  • GB/T 24916-2010 Surface treatment solution.Determination of metal element contents.Inductively coupled plasma atomic emission spectrometric method
  • GB/T 18932.22-2003 Method for the determination of fructose,glucose,sucrose,maltose contents in honey-Liquid chromatography refractive index detection method
  • GB/T 30986-2014 Method for the determination of glucose, sucrose,maltose contents in biochemical products.Liquid chromatography with refractiveindex detector
  • GB/T 16634-1996 Industrial circulating cooling water--Determination of zinc for phosphorus-zinc prefilming fluid--Atomic absorption spectrometric method
  • GB/T 16635-1996 Industrial circulating cooling water--Determination of calcium for phosphorus-zinc prefilming fluid--Atomic absorption spectrometric method

海关总署, Determination of Cadmium Content in Solution by Fluorescence Method

  • SN/T 4763.2-2021 Determination of mercury content in coal Oxygen bomb combustion-atomic fluorescence spectrometry
  • SN/T 5153-2019 Determination of fluorescent whitening agent content in household paper by UV spectroscopy
  • SN/T 5412-2022 Determination of cobalt, copper and manganese content in cobalt concentrates by wavelength dispersive X-ray fluorescence spectrometry
  • SN/T 5251-2020 Determination of sodium, aluminum, silicon, calcium, titanium, vanadium, manganese, iron, nickel and sulfur content in imported and exported petroleum coke by wavelength dispersive X-ray fluorescence spectrometry
  • SN/T 5266-2020 Determination of copper, iron, arsenic, zinc, cadmium, mercury and silver contents in mixed lead-zinc ores by inductively coupled plasma optical emission spectrometry
  • SN/T 1732.23-2019 Determination of lead, chromium, cadmium, mercury and arsenic in pyrotechnic agents for fireworks and firecrackers by inductively coupled plasma optical emission spectrometry

Professional Standard - Energy, Determination of Cadmium Content in Solution by Fluorescence Method

  • NB/T 11264-2023
  • NB/SH/T 0842-2017 Determination of Sulfur Content in Light Liquid Fuels by Single Wavelength Dispersive X-ray Fluorescence Spectrometry
  • NB/SH/T 6043-2021 Determination of Lead, Iron and Manganese in Gasoline Energy Dispersive X-ray Fluorescence Spectrometry
  • NB/T 11260-2023
  • NB/SH/T 6046-2021 Determination of boron content in brake fluid by inductively coupled plasma emission spectrometry
  • NB/SH/T 0880-2014 Standard test method for determination of calcium, chlorine, copper, magnesium ,phosphorus, sulfur, and zinc in unused lubricating oils and additives by wavelength dispersive X-ray fluorescence spectrometry (mathematical correction procedure)
  • NB/SH/T 0939-2016 Determination of Aromatics Content in Aviation Fuel and Petroleum Fractions by High Performance Liquid Chromatography with Differential Refractive Detection

国家能源局, Determination of Cadmium Content in Solution by Fluorescence Method

  • SH/T 0842-2017 Determination of sulfur content in light liquid fuels by single-wavelength dispersive X-ray fluorescence spectrometry
  • NB/SH/T 0977-2019 Determination of chlorine content in light oils by single-wavelength dispersive X-ray fluorescence spectrometry
  • NB/SH/T 0993-2019 Determination of silicon content in gasoline and related products by single-wavelength dispersive X-ray fluorescence spectrometry
  • SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts by X-ray fluorescence spectrometry
  • SH/T 0939-2016 Determination of Aromatic Hydrocarbons in Aviation Fuels and Petroleum Fractions by High Performance Liquid Chromatography with Differential Refractive Index Detector

Hebei Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB13/T 5028-2019 Determination of total sulfur content in alcohol-based fuels by ultraviolet fluorescence method

YU-JUS, Determination of Cadmium Content in Solution by Fluorescence Method

  • JUS ISO 4883:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. solution method
  • JUS H.B8.292-1983 Fertilizers. Determination of phosphorus content soluble in citric acid. Spectrophotometric method
  • JUS H.G8.134-1984 Reagents. Ammoniasolution. Determination ofsodium andpotassium contents. Flame emission spectro- hotometric method

CEN - European Committee for Standardization, Determination of Cadmium Content in Solution by Fluorescence Method

  • PREN 17178-2018 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

ES-UNE, Determination of Cadmium Content in Solution by Fluorescence Method

  • UNE-EN 17178:2020 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

British Standards Institution (BSI), Determination of Cadmium Content in Solution by Fluorescence Method

  • BS EN 17178:2019 Liquid petroleum products. Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
  • BS 7755-3.6:1995 Soil quality. Chemical methods. Determination of phosphorus. Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
  • BS EN 16997:2017 Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method
  • BS EN 14084:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
  • BS EN 14981:2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
  • BS EN 14083:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion
  • BS 3900-B9:1986 Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' cadmium content
  • BS EN 14078:2009 Liquid petroleum products - Determination of fatty methyl ester (FAME) content in middle distillates - Infrared spectrometry method
  • BS EN 14078:2014 Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method
  • BS EN 62321-3-1:2014 Determination of certain substances in electrotechnical products. Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
  • BS ISO 11495:2008 Jewellery - Determination of palladium in palladium jewellery alloys - Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element
  • BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
  • BS EN 14332:2004 Foodstuffs - Determination of trace elements - Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion
  • BS EN 13723:2002 Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
  • BS 3338-17:1965 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
  • BS EN 13723:2002*BS 2000-489:2002 Methods of test for petroleum and its products - Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
  • BS EN 15851:2010 Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection
  • BS EN ISO 20565-1:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and determination of gravimetric silica
  • BS EN ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method).Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica

Guangxi Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB45/T 1544-2017 Rapid determination of cadmium, lead, copper and arsenic in soil by anodic stripping voltammetry
  • DB45/T 1545-2017 Rapid determination of cadmium, lead, copper and arsenic in water quality by anodic stripping voltammetry
  • DB45/T 1546-2017 Rapid determination of cadmium, lead, copper and arsenic in grains by anodic stripping voltammetry

Guangdong Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB44/T 2039-2017 Determination of Mercury in Leather and Leather Products - Atomic Fluorescence Spectrometry
  • DB44/T 897-2011 Determination of Dissolution of Lead and Cadmium in Ceramics for Daily Use Graphite Furnace Atomic Absorption Spectrometry

Qinghai Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB63/T 1319-2014 Determination of K, Na, Ca, Mg Content in Potassium Chloride X-ray Fluorescence Spectrometry

Henan Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB41/T 1706-2018 Determination of Potassium Content in Compound Fertilizers by Energy Dispersive X-ray Fluorescence Spectrometry
  • DB41/T 1705-2018 Determination of Phosphorus Content in Compound Fertilizers Energy Dispersive X-ray Fluorescence Spectrometry

Professional Standard - Agriculture, Determination of Cadmium Content in Solution by Fluorescence Method

  • SN/T 5643.1-2023
  • SN/T 5053-2018 Determination of Arsenic, Mercury, Selenium, Tin and Bismuth in Antimony Concentrates by Hydride Atomic Fluorescence Spectrometry
  • NY/T 4313-2023 Determination of Arsenic, Cadmium, Lead, Chromium, Copper and Zinc in Biogas Slurry Microwave Digestion-Inductively Coupled Plasma Mass Spectrometry
  • SN/T 5054-2018 Determination of zinc, cadmium, lead, manganese, iron, magnesium, calcium and copper in antimony concentrates by inductively coupled plasma emission spectrometry

AENOR, Determination of Cadmium Content in Solution by Fluorescence Method

  • UNE 77324:2003 Soil quality -- Determination of phosphorus -- Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution.
  • UNE-EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
  • UNE-EN ISO 20846:2012 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
  • UNE-EN 13723:2003 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
  • UNE-EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
  • UNE-EN 14981:2007 Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
  • UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method

Professional Standard - Textile, Determination of Cadmium Content in Solution by Fluorescence Method

  • FZ/T 01163-2022 Determination of total lead and total cadmium content in textiles and their accessories X-ray fluorescence spectrometry (XRF) analysis method

Zhejiang Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB3301/T 117-2007 Determination of Organic Selenium and Inorganic Selenium in Rice by Atomic Fluorescence Spectrometry
  • DB33/T 691-2008 Determination of Oxytetracycline, Tetracycline, Chlortetracycline and Doxycycline Residues in Aquatic Products High Performance Liquid Chromatography Fluorescence Detection Method

CZ-CSN, Determination of Cadmium Content in Solution by Fluorescence Method

  • CSN ISO 3846-4:1994 Paints and vamishes. Determination of ?soluble" metal content Part 4: Determinalion of cadmium content. Flame atomic absorption spectrometric method and polarographic method
  • CSN ISO 3846-6:1994 Paints and varnishes. Determination of ?soluble" metal content Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method
  • CSN 68 4152-1987 Extra pure compounds etermination of a content of chemical lements admixture in liquid compounds y a method of atomic emission spectros- opy
  • CSN 46 7092-5-1998 Testing methods for feeding stuffs - Part 5: Determination of soluble nitrogen content after treatment with pepsin in hydrochloric acid solution

American Society for Testing and Materials (ASTM), Determination of Cadmium Content in Solution by Fluorescence Method

  • ASTM E1600-23 Standard Test Methods for Determination of Gold in Cyanide Solutions
  • ASTM C1343-96(2002) Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • ASTM C1343-96 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
  • ASTM D4764-01 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • ASTM D4764-88(1993)e1 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • ASTM D4764-01(2006) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • ASTM D4764-01(2012) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • ASTM C1343-16 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • ASTM D4764-01(2016) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM UOP825-20 Monoethanolamine Content In Solutions By Color Indicator Titration
  • ASTM UOP824-20 Diethanolamine Content in Solutions by Color Indicator Titration
  • ASTM D4764-01(2023) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • ASTM D7220-06 Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
  • ASTM D6334-12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D6376-10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D4294-02 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D4294-98 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D4294-90(1998)e1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D4294-08 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4294-08a Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4294-08ae1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM C1296-95 Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
  • ASTM C1296-95(2001) Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
  • ASTM D3335-85a(2014) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D6334-07 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
  • ASTM D2622-10 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM UOP987-15 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM D2622-05 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D2622-07 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM D6334-12(2017) Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
  • ASTM D4294-03 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • ASTM C1508-01(2006) Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM C1508-01 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM D2622-16 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7536-16 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM D4294-16 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4294-16e1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM C1855-18 Standard Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence
  • ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-01 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-90(1998) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM UOP987-11 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM D7620-10(2015) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM D7551-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM C1508-01(2011) Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6802-02 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM UOP989-14 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM D7757-17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D6802-02(2010) Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • ASTM D7212-06 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • ASTM UOP988-11 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection

GOSTR, Determination of Cadmium Content in Solution by Fluorescence Method

  • GOST ISO 20846-2016 Liquid petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method
  • GOST ISO 20884-2016 Liquid petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
  • GOST 34258-2017 Veterinary preparation, feed additive. Method for determination of water-soluble vitamins content by high performance liquid chromatography with spectrophotometric detection

BE-NBN, Determination of Cadmium Content in Solution by Fluorescence Method

  • NBN T 04-041-1983 Formaldehyde solutions for industrial use - Détermination of iron content - 2,2'-Bi-pyridyl photometric method
  • NBN T 04-054-1983 Acetaldehyde for indus trial use - Determination of iron comtent- 2,2' - Bipyridyl photometric method
  • NBN P 33-001-1985 Zinc ores - Determination of zinc content
  • NBN T 04-333-1988 Caprolactam for industrial use - Determination of colour of 5 0 %aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) - Spectrometric method

Jilin Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB22/T 2136-2014 Rapid Determination of Total Iron Content in Iron Ore Powder-X-ray Fluorescence Spectrometry
  • DB22/T 1691-2012 Rapid Determination of Phosphorus and Potassium in Compound Fertilizers by X-ray Fluorescence Spectrometry
  • DB22/T 1688-2012 Determination of Arsenic, Cadmium, Lead and Chromium in Fertilizers by Inductively Coupled Plasma Spectrometry
  • DB22/T 1694-2012 Determination of cobalt, copper, iron, lead, zinc, calcium, magnesium, manganese, cadmium, chromium, sodium in nickel chloride by inductively coupled plasma spectrometry
  • DB22/T 1693-2012 Determination of cobalt, copper, iron, lead, zinc, calcium, magnesium, manganese, cadmium, chromium, sodium in nickel sulfate by inductively coupled plasma spectrometry
  • DB22/T 265-2020 Determination of Silicon and Phosphorus in Ferrochrome - Acid-soluble and Alkali-fusion-Inductively Coupled Plasma Atomic Emission Spectrometry

Anhui Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB34/T 4207-2022 Determination of Ofloxacin in Chicken Excreta by High Performance Liquid Chromatography-Fluorescence Detection
  • DB34/T 2981-2017 Determination of content of lead and lead alloy tin, antimony, arsenic, bismuth, copper, cadmium, calcium and silver by wavelength dispersive X-ray fluorescence spectrometry
  • DB34/T 3082-2018 Determination of Calcium, Magnesium, Silicon, Iron, Aluminum, Manganese and Potassium in Calcite X-ray Fluorescence Spectrometry
  • DB34/T 3302-2018 Determination of five kinds of benzoxazole fluorescent whitening agents in cosmetics by high performance liquid chromatography tandem mass spectrometry

国家质量监督检验检疫总局, Determination of Cadmium Content in Solution by Fluorescence Method

  • SN/T 4658-2016 Simultaneous determination of arsenic and mercury contents in fluorite using microwave digestion-atomic fluorescence spectrometry
  • SN/T 4570-2016 Determination of chlorine and bromine content in petroleum and petroleum products by wavelength dispersive X-ray fluorescence spectrometry
  • SN/T 1504.5-2017 Plastic raw materials for food containers and packaging Part 5: Determination of impurity element content in polyolefins by X-ray fluorescence spectrometry

Professional Standard - Chemical Industry, Determination of Cadmium Content in Solution by Fluorescence Method

  • HG/T 4326-2012 Reclaimed water.Determination of nickel,copper,zinc,cadmium and lead.Atomic absorption spectromic method

Professional Standard - Petrochemical Industry, Determination of Cadmium Content in Solution by Fluorescence Method

  • NB/SH/T 0822-2010 Standard test method for determination of phosphorus,sulfur,calcium,and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy
  • NB/SH/T 0842-2010 Standard test method for sulfur in gasoline and diesel fuel by monochromatic wavelength dispersive X-ray fluorescence spectrometry
  • SH/T 1839-2023 Determination of bromine content of brominated isobutene-isoprene rubber(BIIR) —X fluorescence spectrometry
  • SH/T 0806-2008 Determination of aromatic hydrocarbon types in middle distillates.High performance liquid chromatography method with refractive index detection

RU-GOST R, Determination of Cadmium Content in Solution by Fluorescence Method

  • GOST 9597-1976 Cellulose. Method for determining of total mass of substances in sodium tydroxide solutions of 10 % and 18 %
  • GOST R EN ISO 20847-2010 Petroleum products. Determination of sulfur content in automotive fuels by energy-dispersive X-ray fluorescence spectrometry
  • GOST EN 14083-2013 Foodstuffs. Determination of trace elements. Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion
  • GOST R 50279.8-1992 Paints and varnishes. Test methods of metal content. Determination of total "soluble" chromium content of the liquid portion of paint. Flame atomic absorbtion spectrometric method
  • GOST R 50279.9-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" mercury content of the pigment portion of the paint and of the liquid portion of waterdelutable paints. Flameless atomic absorption spectrometric method
  • GOST R 50279.7-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" hexavalent chromium content of pigment portion of the liquid paint or the paint in powder form. Diphenilcarbazide spectrophotometric method
  • GOST 27785-1988 Biological dry compounds. Method of determination of oxygen content in bottles of compound
  • GOST R 55448-2013 Feedstuffs, compound feeds, feed raw materials. Determination of ochratoxin A content using high-performance liquid chromatography with fluorimetric detection

IN-BIS, Determination of Cadmium Content in Solution by Fluorescence Method

Standard Association of Australia （SAA）, Determination of Cadmium Content in Solution by Fluorescence Method

  • AS 4205.2:1994 Analysis of urine for trace elements - Determination of copper, cadmium and lead - Flame atomic absorption spectrometric method

Jiangxi Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB36/T 1243-2020 Determination of Organic Selenium and Inorganic Selenium in Rice by Hydride Atomic Fluorescence Spectrometry

Hunan Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB43/T 1657-2019 Determination of Insoluble Sugar Content in Di reed of Dongting Lake by Liquid Chromatography

Professional Standard - Ferrous Metallurgy, Determination of Cadmium Content in Solution by Fluorescence Method

  • YB/T 5158-1993 Spectroscopic Determination of Trace Boron in High Purity Graphite Products Solution Dry Residue Method
  • YB/T 5158-2007 Determination of trace boron in graphite products of High purty by spectroscopical method The solution ang dry residue method

Japanese Industrial Standards Committee (JISC), Determination of Cadmium Content in Solution by Fluorescence Method

  • JIS K 0470:2008 Determination of arsenic and lead in clay and sand using energy-dispersive X-ray fluorescence spectrometry

未注明发布机构, Determination of Cadmium Content in Solution by Fluorescence Method

  • DIN EN ISO 20884:2022 Mineral oil products – Determination of sulfur content in fuels – Wavelength dispersive X-ray fluorescence spectrometry
  • BS EN ISO 20565-1:2008(2010) Chemical analysis of chrome - bearing refractory products and chrome - bearing raw materials (alternative to the X - ray fluorescence method) Part 1 : Apparatus, reagents, dissolution and determination of gravimetric silica

Professional Standard - Electron, Determination of Cadmium Content in Solution by Fluorescence Method

  • SJ/T 10924-1996 Methods for determination of silica content in potassium silicate solution for use in electronic industry

工业和信息化部, Determination of Cadmium Content in Solution by Fluorescence Method

  • YS/T 1340-2019 Methods for chemical analysis of lead and lead alloys Determination of tin, antimony, arsenic, bismuth, copper, cadmium, calcium and silver contents Wavelength dispersive X-ray fluorescence spectrometry

Gansu Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB62/T 2762-2017 Determination of Multielement Content in Stainless Steel Slag and Chromium Slag Wavelength Dispersive X-ray Fluorescence Spectrometry
  • DB62/T 2764-2017 Determination of iron, potassium, lead, zinc, copper, arsenic and other multi-element content in iron ore Wavelength dispersive X-ray fluorescence spectrometry
  • DB62/T 2761-2017 Determination of multi-element content in stainless steel dust and chrome drainage sand by wavelength dispersive X-ray fluorescence spectrometry

VN-TCVN, Determination of Cadmium Content in Solution by Fluorescence Method

  • TCVN 6701-2011 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

Heilongjiang Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB23/T 1906-2017 Determination of content of magnesium, aluminum, silicon, potassium, calcium and iron in graphite raw ore and concentrate X-ray fluorescence spectrometry

Professional Standard - Building Materials, Determination of Cadmium Content in Solution by Fluorescence Method

  • JC/T 2133-2012 Determination of impurities in silica sol for polishing solution in semiconductor industry.Inductively coupled plasma atomic emission spectrometric method

ES-AENOR, Determination of Cadmium Content in Solution by Fluorescence Method

  • UNE 55-905-1991 Surface active agents. Soaps. Determination of low contents of free glycerol by milecular absorption spectrometry
  • UNE 81-591-1991 Biological control. Determination of lead in blood. Extraction method. Atomic absorption spectrometry

Malaysia Standards, Determination of Cadmium Content in Solution by Fluorescence Method

  • MS 133 Pt.B8-1999 Methods of test for paints and varnishes:part b8:determination of soluble cadmium content - flame atomic absorption spectrometric method and polarographic method

National Health Commission of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • GB 23200.105-2016 National food safety standards— Determination of carbaryl residue in meat and meat products HPLC-fluoresce detector with post column derivation

Universal Oil Products Company (UOP), Determination of Cadmium Content in Solution by Fluorescence Method

  • UOP 987-2015 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • UOP 989-2014 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • UOP 988-2011 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection

PT-IPQ, Determination of Cadmium Content in Solution by Fluorescence Method

中华全国供销合作总社, Determination of Cadmium Content in Solution by Fluorescence Method

  • GH/T 1260-2019 Near-infrared spectroscopic determination of moisture, tea polyphenols and caffeine content in solid instant tea

Professional Standard - Electricity, Determination of Cadmium Content in Solution by Fluorescence Method

  • DL/T 2280-2021 Determination of Sulfur Trioxide Content in Flue Gas from Coal-fired Power Plants Isopropanol Solution Absorption Ion Chromatography

International Electrotechnical Commission (IEC), Determination of Cadmium Content in Solution by Fluorescence Method

  • IEC 62321-3-1:2013 Determination of certain substances in electrotechnical products - Part 3-1: Screening test methods - Screening of electrotechnical products for lead, mercury, cadmium, total chromium and total bromine using X-ray fluorescence spectrometry

AT-ON, Determination of Cadmium Content in Solution by Fluorescence Method

  • OENORM EN ISO 20884/A1:2021 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019/DAM 1:2021) (Amendment)
  • ONORM ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 4: Determination of oxygen content in aluminium nitride by XRF analysis

Liaoning Provincial Standard of the People's Republic of China, Determination of Cadmium Content in Solution by Fluorescence Method

  • DB21/T 3059-2018 Determination of copper, zinc, iron, manganese, calcium, phosphorus, sodium, magnesium, lead, chromium, cadmium and arsenic in feed - Inductively coupled plasma emission spectrometry

  Determination of Cadmium Content in Solution by Fluorescence Method.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved