ZH
RU
ES

rough balance

rough balance, Total:209 items.

In the international standard classification, rough balance involves: Linear and angular measurements, Construction materials, Flexible drives and transmissions, Vocabularies, Iron and steel products, Semiconducting materials, Measurement of force, weight and pressure, Road engineering, Paper and board, Fasteners for aerospace construction, Aerospace fluid systems and components, Space systems and operations, Particle size analysis. Sieving, Measurement of volume, mass, density, viscosity, Fasteners, Materials for aerospace construction, Equipment for petroleum and natural gas industries, Valves, Insulating fluids, Coatings and related processes used in aerospace industry, Testing of metals, Meat, meat products and other animal produce, Mining and quarrying.

PL-PKN, rough balance

PN M82030-1959 Rough plain washers

CZ-CSN, rough balance

CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification
CSN 17 0159-1962 Agate parta of scales. Flat rest
CSN 17 0153-1962 Agate parts of scales. Flat bearings
CSN 17 7123-1961 Balances. Flat double knife edges with
CSN 17 7000-1966 Classification of lever balances and scales
CSN 17 0152-1962 Agate parts oí scales. Knife edge
CSN 13 1553-1965 Flat sealing rings for flanged connections of pipo linea with rough sealing strips -Np 6
CSN 13 1556-1965 Flat sealing rings for flanged connections of pipe lines with rough sealing strips-Np 25
CSN 13 1552-1965 Flat sealing rings for flanged connections of pipe lines with rough sealing strips Np 2,5
CSN 13 1554-1965 Flat sealing rings for flanged connections of pipe lines with rough sealing strips-Np 10
CSN 13 1551-1965 Flat sealing rings for flanged connections of pipe lines with rough front surfaces Np 0,4
CSN 13 1555-1965 Flat sealing rings for flanged connections of pipe lines with rough sealing strips-Np 16
CSN 13 1557-1965 FLat sealing rings for flanged connections of pipe lines with rough sealing strips -- Np 40
CSN 17 0154-1962 Agate parts of scales. Single bearing
CSN 17 0157-1962 Agate parts of scales. Cone rest
CSN 17 0158-1962 Agate paits of scales. Prismatic arest
CSN 17 0150-1962 Agate parts of scales. Knife edges, flat bearings, rest. Common regulations
CSN 17 0155-1962 Agate parts of scales. Cross bearing
CSN 17 0156-1962 Agate parts of scales.Cross bearing with cuts

TH-TISI, rough balance

TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method

International Organization for Standardization (ISO), rough balance

ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
ISO 8791-5:2020 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method
ISO 13704:2001 Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
ISO 8791-4:2007 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 8791-2:1990 Paper and board; determination of roughness/smoothness (air leak methods); part 2: Bendtsen method
ISO 8791-1:1986 Paper and board; Determination of roughness/smoothness (air leak methods); Part 1 : General method
ISO 8791-4:2021 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 8791-3:2017 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
ISO 8791-2:2013 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2: Bendtsen method
ISO 8791-3:2005 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 3: Sheffield method
ISO 8791-3:1990 Paper and board; determination of roughness/smoothness (air leak methods); part 3: Sheffield method
ISO 8791-4:1992 Paper and board; determination of roughness/smoothness (air leak methods); part 4: print-surf method

British Standards Institution (BSI), rough balance

BS EN 1467:2022 Natural stone. Rough blocks. Requirements
BS EN 10049:2005 Measurement of roughness average - Ra and peak count RPc on metallic flat products
21/30429713 DC BS EN 1467. Natural stone. Rough blocks. Requirements
BS EN 10049:2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products
BS ISO 8791-4:2008 Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS ISO 8791-3:2005 Paper and board - Determination of roughness/smoothness (air leak methods) - Sheffield method
BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods). Bendtsen method
BS ISO 8791-3:2017 Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method
BS EN 4073:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1100 MPa (at ambient temperature) / 235 °C
BS EN 4073:2010 Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification 1100 MPa (at ambient temperature) / 235°C
BS ISO 14952-4:2004 Space systems - Surface cleanliness of fluid systems - Rough-cleaning processes
BS EN 4178:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - 1100 MPa (at ambient temperature) / 315 °C
BS EN 4161:2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 4161:2009 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 4138:2009 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 4138:2010 Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235C
BS EN 4178:2017 Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature) / 315 C
BS EN 3630:2008 Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes
BS ISO 12584:2013 Aerospace. Hydraulic fluid components. Expression of particulate contamination levels

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, rough balance

GB/T 11357-1989 Quality,Surfaceroughness and balance of transmission pulleys
GB/T 11357-2008 Quality,roughness and balance of transmission pulleys
GB/T 29505-2013 Test method for measuring surface roughness on planar surfaces of silicon wafer
GB/T 32642-2016 Flat panel displays glass substrate surface roughness measurement method
GB/T 22881-2008 Paper and board.Determination of roughness/smoothness(air leak methods).General method
GB/T 5157-1985 Metallic powders--Determination of particle size distribution by method of sedimentation balance

IN-BIS, rough balance

国家市场监督管理总局、中国国家标准化管理委员会, rough balance

GB/T 11357-2020 Quality, roughness and balance of transmission pulleys

Association Francaise de Normalisation, rough balance

NF EN 10049:2014 Mesure de la rugosité moyenne Ra et du nombre de pics RPc sur les produits plats métalliques
NF A45-000:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products.
NF A45-000*NF EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products
NF L17-781:1992 Aerospace series. Rovings. Determination of the fuzz.
NF G35-002:1985 Revêtements de sol textiles - Moquettes unies en laine cardée ou en mélange de laine cardée 80% polyamide 20%.
NF L17-752:1992 Aerospace series. R-glass rovings. Product standard. Rovings on the basis of strands RC14 160 P109.
NF L24-174*NF EN 4073:2016 Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF ISO 8791-4:2021 Papier et carton - Détermination de la rugosité/du lissé (méthodes du débit d'air) - Partie 4 : méthode Print-surf
NF L24-169:2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 oC.
NF L24-173:2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC.
NF L24-173*NF EN 4138:2016 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF L24-174:2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC.
NF L24-151*NF EN 4074:2010 Aerospace series - Screws, pan head, six lobe recess coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification : 1100 MPa (at ambient temperature)/425oC
NF ISO 8791-2:2014 Papier et carton - Détermination de la rugosité/du lissé (méthodes du débit d'air) - Partie 2 : méthode Bendtsen
NF L17-750:1992 Aerospace series. Glass rovings with high mechanical properties. General technical specification.
NF Q03-079-2*NF ISO 8791-2:2014 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2 : Bendtsen method
NF L24-168:2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.
NF L24-168*NF EN 4178:2017 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC
NF L23-166*NF EN 2913:2000 Aerospace series - Washers, flat, large diameter, in steel, cadmiumplated
NF L43-230*NF EN 3630:2008 Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes
NF L22-011*NF EN 4847:2022 Aerospace series - Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
FD T66-080:2016 Bituminous emulsions - Determination of water content - Evaporation procedure using drying balance
NF L14-423*NF EN 2635:2006 Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D < or = to 200 mm with peripheral coarse grain control.
NF L14-211*NF EN 2632:2006 Aerospace series - Aluminium alloy AL-P7075- -T73511 - Extruded bar and sections - a or D < or = 150 mm with peripheral coarse grain control

ES-UNE, rough balance

UNE-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)

German Institute for Standardization, rough balance

DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
DIN 8119-4:2007 Platform scales - Part 4: Design loads for floor-mounted and dormant scales
DIN EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products; English version of DIN EN 10049:2006-02
DIN EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
DIN ISO 8791-4:2023-08 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2021)
DIN 65071-1:1992-12 Aerospace; fibre reinforced moulding materials; preparation of test panels of unidirectional wound yarns and rovings
DIN 65071-1:1992 Aerospace; fibre reinforced moulding materials; preparation of test panels of unidirectional wound yarns and rovings
DIN EN 4138:2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C; German and English version EN 4138:2009
DIN EN 2914:1996 Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated; German version EN 2914:1996
DIN 65158:1993 Aerospace; blind rivets of aluminium alloy with flat round head self-locking device
DIN EN 4178:2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4178:2009
DIN EN 4178:2017 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4178:2017

Danish Standards Foundation, rough balance

DS/EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
DS 1103.11:1982 Test methods for rigid flat sheets. Surface finish (roughness) and surface stability
DS/EN 2885:1996 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
DS/EN 4073:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1 100 MPa (at ambient temperature) / 235 °C
DS/EN 4074:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
DS/EN 4161/AC:2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 °C
DS/EN 4161:2009 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 °C
DS/EN 4138:2009 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature) / 235 °C

Lithuanian Standards Office , rough balance

LST EN 10049-2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
LST EN 2885-2001 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
LST EN 4074-2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
LST EN 4073-2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1 100 MPa (at ambient temperature) / 235 °C
LST EN 4161-2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 °C
LST EN 4138-2010 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature) / 235 °C

European Committee for Standardization (CEN), rough balance

EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
EN 4073:2016 Aerospace series - Screws@ pan head@ hexalobular recess@ coarse tolerance shank@ medium length thread@ in alloy steel@ cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 ��
EN 4138:2016 Aerospace series - Screws@ pan head@ offset cruciform recess@ coarse tolerance normal shank@ medium length thread@ in alloy steel@ cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 ��
EN 4178:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - 1 100 MPa (at ambient temperature) / 315 degree C
EN 4178:2017 Aerospace series - Screws@ pan head@ six lobe recess@ coarse tolerance normal shank@ medium length thread@ in titanium alloy@ anodized@ MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 ��
EN 4073:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1 100 MPa (at ambient temperature) / 235 degree C
EN 4138:2009 Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature) / 235 degree C
EN 1342:2012 Setts of natural stone for external paving - Requirements and test methods

CEN - European Committee for Standardization, rough balance

EN 10049:2005 Measurement of roughness average Ra and peak count RPc on metallic flat products

HU-MSZT, rough balance

MSZ MI 4724-1982

Korean Agency for Technology and Standards (KATS), rough balance

KS F 2575-2013(2018) Standard test method for flat or elongated particles in coarse aggregate
KS M ISO 8791-2:2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 2：Bendtsen method
KS M ISO 8791-2:2022 Paper and boar — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
KS M ISO 8791-1:2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
KS M ISO 8791-3:2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 3：Sheffield method
KS M ISO 8791-3:2022 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
KS M ISO 8791-2:2008 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 2:Bendtsen method
KS M ISO 8791-1:2008 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 1：General method
KS M ISO 8791-3:2006 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 3:Sheffield method
KS M ISO 8791-4:2008 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 4：Print-surf method
KS C 2002-1998(2018)
KS M ISO 8791-4:2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

KR-KS, rough balance

KS F 2575-2013(2023) Standard test method for flat or elongated particles in coarse aggregate
KS M ISO 8791-2-2022 Paper and boar — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
KS M ISO 8791-3-2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 3：Sheffield method
KS M ISO 8791-3-2022 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
KS M ISO 8791-1-2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
KS M ISO 8791-2-2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 2：Bendtsen method
KS M ISO 8791-4-2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

Indonesia Standards, rough balance

SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI ISO 8791-4:2010 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4:Print-surf method

ESDU - Engineering Sciences Data Unit, rough balance

ESDU 74027-1974 The effect of surface roughness on the fatigue limit of steels (at zero mean stress).
ESDU 86035 E-2011 Integral length scales of turbulence over flat terrain with roughness changes
ESDU 01008 A-2002 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes
ESDU 01008 B-2005 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes.
ESDU 01008-2001 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes
ESDU 01008 C-2010 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes
ESDU 73016-1973 The mean skin friction coefficient for a rough flat plate with a turbulent two-dimensional boundary layer in compressible adiabatic flow@ with application to wedges@ cylinders and cones.

IT-UNI, rough balance

UNI 7688-1977
UNI 5933-1977
UNI ISO 8791-4:2021 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
UNI 2733-1965 Hexagon cap nuts. Iso metric coarse and fine thread. Finish a.
UNI 6058-1967
UNI 6113-1967

AENOR, rough balance

UNE 57080-2:1988 PAPER AND BOARD. DETERMINATION OF ROUGHNESS/SMOOTHNESS. PART 2: BENDTSEN METHOD
UNE 57080-1:1988 PAPER AND BOARD. DETERMINATION OF ROUGHNESS/SMOTHNESS. PART 1: GENERAL METHOD
UNE 20583-3/1C:1979 DIMENSIONS OF FERROMAGNETIC OXIDES PARTS. AERIAL RODS AND SLABS
UNE 20583-3:1978 DIMENSIONS OF FERROMAGNETIC OXIDES PARTS. AERIAL RODS AND SLABS

American Society for Testing and Materials (ASTM), rough balance

ASTM E319-85(2003) Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM E1270-88(2003) Standard Test Method for Equal Arm Balances
ASTM D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-19(2023) Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM E1364-95(2000) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1364-95(2017) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E898-88(1993) Standard Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM E1270-88(1997) Standard Test Method for Equal Arm Balances
ASTM E1270-88(2008) Standard Test Method for Equal Arm Balances
ASTM E1270-88(2014) Standard Test Method for Equal Arm Balances
ASTM E319-85(2008) Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM E319-85(2014) Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM E898-88(2005) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM E491-73(2004) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
ASTM E491-73(1999) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
ASTM E491-73(2004)e1 Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
ASTM E491-73(2020) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft

US-AAMA, rough balance

AAMA 902-2014 Voluntary Specification for Sash Balances

RO-ASRO, rough balance

STAS 8497-1988 FLAT WIRES FOR RECEIVING AERIALS
STAS 11200/72-1979 Graphical symbols GRAPHICAL SYMBOL FOR BALANCE

SE-SIS, rough balance

SIS SMS 1980-1969 Hexagon socket grub screws with flat point Inch screw threads. Coarse pitch

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., rough balance

ASHRAE MN-00-7-3-2000 U-Factors of Flat and Domed Skylights

Natural Gas Processor's Association (NGPA), rough balance

GPA RR-40A-1982 Phase Equilibria of a High Nitrogen Content Synthetic Natural Gas
GPA TP-19-1988 Vapor-Solid Equilibrium Ratios for Structure I and II Natural Gas Hydrates

AASHTO - American Association of State Highway and Transportation Officials, rough balance

M231-1990 Standard Specification for Balances Used in the Testing of Materials

未注明发布机构, rough balance

DIN EN 4847:2022 Aerospace – Flat head spiral drive screw, coarse shank tolerance, medium thread length, alloy steel, cadmium plated – Class: 1 100 MPa (at room temperature)/235°C
BS 6F 55:1991(2008) Specification for 345 g / m2 and 415 g / m2 cotton canvas fabrics suitable for aerospace purposes

AT-ON, rough balance

ONORM B 2526-1998 Identification plates for gas pipelines - Design, application Plaques indicatrices pour canalisations de gaz - Conception, utilisation
ONORM EN 2630-1994 Aerospace series. Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D < or = 125 mm with peripheral coarse grain control
ONORM EN 2632-1994 Aerospace series. Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D < or = 100 mm with peripheral coarse grain control
ONORM EN 2636-1994 Aerospace series. Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D < or = 200 mm with peripheral coarse grain control
ONORM EN 2633-1994 Aerospace series. Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm < or = a or D < or = 150 mm with peripheral coarse grain control

European Association of Aerospace Industries, rough balance

AECMA PREN 4161-1993 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition 1
AECMA PREN 4161-1994 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Long Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1
AECMA PREN 4138-1993 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius Edition 1
AECMA PREN 4138-1994 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P1

Aerospace, Security and Defence Industries Association of Europe (ASD), rough balance

ASD-STAN PREN 4075-1994 Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Threaded to Head, in Corrosion Resisting Steel, Passivated Classification : 490 MPa (at Ambient Temperature)/425 Degrees C (Edition P1)

RU-GOST R, rough balance

GOST 29329-1992 Balance for static weighing. General technical requirements
GOST 32156-2013 Canned of the pacific Salmon fishes natural and natural with oil addition. Spacifications

(U.S.) Ford Automotive Standards, rough balance

FORD WSS-M1H854-A-2008 FABRIC, TVER CLASSIQUE PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***

GB-REG, rough balance

REG NASA-LLIS-1160--2001 Lessons Learned ?Space Shuttle Program/Planning Horizon/Safety

SAE - SAE International, rough balance

SAE AIR5601-2005 A Guideline for Application of RF Photonics to Aerospace Platforms
SAE AS5603A-2010 Digital Fiber Optic Link Loss Budget Methodology for Aerospace Platforms

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, rough balance

ITU-T K.122-2016 Exposure levels in close proximity of radiocommunication antennas (Study Group 5)

Professional Standard - Geology, rough balance

DZ/T 0184.21-1997 Determination of Oxygen Isotopes in Natural Water by Carbon Dioxide Water Balance Method

Society of Automotive Engineers (SAE), rough balance

SAE AS5603A-2018 Digital Fiber Optic Link Loss Budget Methodology for Aerospace Platforms