ZH
RU
ES

Composite material compression test method at room temperature

Composite material compression test method at room temperature, Total:191 items.

In the international standard classification, Composite material compression test method at room temperature involves: Ceramics, Testing of metals, Reinforced plastics, Materials for the reinforcement of composites, Fluid power systems, Textile fibres, Seals, glands, Mechanical testing, Rubber and plastics products, Refractories, Construction materials, Plastics, Road vehicles in general, Materials for aerospace construction, Test conditions and procedures in general, Road engineering, Products of the textile industry, Pipeline components and pipelines, Insulating materials, Electrical wires and cables, Adhesives, Acoustics and acoustic measurements.

RU-GOST R, Composite material compression test method at room temperature

GOST R 57606-2017 Ceramic composites. Compression test method at normal temperature
GOST R 57605-2017 Ceramic composites. Test method of compression at elevated temperature
GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
GOST 33495-2015 Polymer composites. Test method for compression after impact
GOST R 57706-2017 Ceramic composites. Method of tension tests at elevated temperature
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST R 57802-2017 Ceramic composites. Test method for determination of transthickness tensile strength at ambient temperature
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST R 57735-2017 Ceramic composites. Test method for open-hole tension testing of specimens at normal temperature
GOST R 56797-2015 Polymer composites. Axial compressive test method for mechanical characteristics of hoop wound polymer matrix composite cylindrical specimens
GOST 32657-2014 Polymer composites. Test methods. Determination of temperature of deflection under load
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST 33844-2016 Polymer composites. Test method for determination of compression-after-impact strength of carbon-fibre-reinforced laminates
GOST R 56466-2015 Space systems. Materials test methods. Method of determining the linear thermal expansion coefficient composites at high temperatures
GOST R 57744-2017 Ceramic composites. Determination of the interlaminar shear strength at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
GOST R 56788-2015 Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST R 57922-2017 Ceramic composites. Test method for determination of mechanical characteristics under monotonic uniaxial tension at normal temperature

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Composite material compression test method at room temperature

GB/T 7314-2017 Metallic materials—Compression test method at room temperature
GB/T 34559-2017 Test method for compressive property of C/C composites
GB/T 34108-2017 Metallic materials—High strain rate compression test method at ambient temperature
GB/T 34505-2017 Copper and copper alloy materials—Tensile testing at room temperature
GB/T 33614-2017 Test method for compression properties of 3D braided fabric and its polymer matrix composites
GB/T 34551-2017 Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composite material compression test method at room temperature

GB/T 7314-2005 Metallic materials-Compression testing at ambient temperature
GB/T 32498-2016 Metal matrix composites.Tensile testing.Method of test at ambient temperature
GB/T 42655-2023 Test method for high temperature compression performance of continuous fiber reinforced ceramic matrix composites
GB/T 30709-2014 Standard test method for compressibility and recovery of laminated composite gasket materials
GB/T 7314-2017(英文版) Metallic materials—Compression test method at room temperature
GB/T 41955-2022 Test method for compression of fiber reinforced polymer matrix composite multi-directional laminates without open-hole
GB/T 34108-2017(英文版) Metallic materials—High strain rate compression test method at ambient temperature
GB/T 42900-2023 High temperature compression test method for metallic materials with high strain rate
GB/T 30968.4-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates.Part 4:Test method of open-hole compressive strength
GB/T 30710-2014 Standard test method for creep relaxation of laminated composite gasket materials
GB/T 30968.2-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates.Part 2:Test method of filled-hole tension and compression
GB/T 41605-2022 Silicon nitride materials for rolling bearing balls—Test method for fracture resistance at room temperature—Indentation fracture (IF) method
GB/T 36264-2018 Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment
GB/T 38534-2020 Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature
GB/T 30968.1-2014 Test method for open-hole/loaded-hole of polymer matrix composite Iaminates.Part 1:Test method of bearing response
GB/T 29459.2-2012 Small punch test methods of metallic materials for in-service pressure equipments.Part 2:Method of test for tensile properties at room temperature
GB/T 38515-2020 The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials
GB/T 2951.6-1997 Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section one: Pressure test at high temperature--Test for resistance to cracking
GB/T 2951.31-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part31:Methods specific to PVC compounds.Pressure test at high temperature.Test for resistance to cracking
GB/T 13477.12-2002 Test method for building sealants Part 12: Determination of adhesion/cohesion properties at constant temperature

工业和信息化部, Composite material compression test method at room temperature

JC/T 2406-2017 Test method for compressive properties of continuous fiber reinforced ceramic matrix composites at room temperature
YS/T 1551-2022 Room temperature high strain rate compression test method for titanium alloys
JC/T 2404-2017 Test method for tensile properties of continuous fiber reinforced ceramic matrix composites at room temperature
JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

American Society for Testing and Materials (ASTM), Composite material compression test method at room temperature

ASTM E9-89(1995) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-09(2018) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-09 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-89a(1995) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-89a(2000) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM F806-99a(2003) Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM F806-99a(2017) Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D6641/D6641M-01e1 Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
ASTM F806-99a Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D6641/D6641M-09 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D5449/D5449M-93(2000) Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5449/D5449M-93 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5449/D5449M-93(2006) Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5449/D5449M-16 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM F36-99(2009) Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM F806-99a(2003)e1 Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM C165-07(2017) Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM F36-15 Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM D5467-97 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5449/D5449M-22 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5467/D5467M-97(2004) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97(2010) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D6641/D6641M-14 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D7137/D7137M-23 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D6641/D6641M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D3410/D3410M-03 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-95 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E2954-15(2022) Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM F1276-23 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
ASTM D6484/D6484M-23 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D5961/D5961M-23 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM E2954-15 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM D6364-06(2018) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D5467/D5467M-97e1 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97(2017) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D7361-07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D7361-07 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM E1922-97 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
ASTM D2344/D2344M-00e1 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D2344/D2344M-22 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D5766/D5766M-23 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D6244-98(2004) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D6244-98 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D6364-06(2011) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D6244-06(2018) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D5766/D5766M-95 Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D5766/D5766M-02a(2007) Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D5766/D5766M-07 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D5766/D5766M-11 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D5766/D5766M-11(2018) Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D2344/D2344M-16 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D6244-06(2011) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D6264/D6264M-07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D6264/D6264M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM E1922/E1922M-22 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D3518/D3518M-18 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D7028-07 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7028-07e1 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM E2191-02 Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
ASTM D5449/D5449M-11 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

Japanese Industrial Standards Committee (JISC), Composite material compression test method at room temperature

JIS R 1673:2007 Test method for compressive behavior of continuous fiber-reinforced ceramic matrix composites at room temperature
JIS R 1721:2015 Testing method for compressive behavior of continuous fiber-reinforced ceramic composites at elevated temperature
JIS R 1678:2007 Test method for open hole tension of continuous fiber-reinforced ceramic matrix composites at room temperature
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature
JIS R 1722:2015 Testing method for fatigue behavior of continuous fiber-reinforced ceramic composites at room temperature under constant amplitude
JIS C 3660-3-1:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 3: Methods specific to PVC compounds -- Section 1: Pressure test at high temperature -- Test for resistance to cracking
JIS R 1656:2003 Testing methods for tensile stress-strain behavior of continuous fiber reinforced ceramic matrix composites at room temperature
JIS R 1687:2009 Testing method for tensile behavior of continuous fiber reinforced ceramic matrix composites at elevated temperatures
JIS C 3660-3-1:2003 Common test methods for insulating and sheathing materials of electric and optical cables -- Part 3-1: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking
JIS R 1723:2015 Testing method for creep behavior of continuous fiber-reinforced ceramic composites under tensile loading at elevated temperature

Professional Standard - Aviation, Composite material compression test method at room temperature

HB 6741-1993 Method for compressive test of open hole on laminated sheet of carbon fiber composite materials
HB 6739-1993 Compression test method for carbon fiber composite laminates after impact
HB 7626-1998 Compression test method for carbon fiber composite laminates in hot and humid environment
HB 5485-1991 Test method for compressive properties of carbon fiber reinforced resin matrix composite sheet
HB 5439-1989 Tension-compression and compression-compression fatigue test methods for carbon fiber resin composites
HB 8621-2021 Test method for extrusion/bypass response of polymer matrix composite laminates for aerospace applications
HB 8620-2021 Concentrated quasi-static indentation force damage resistance test method for aerospace polymer matrix composite laminates

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Composite material compression test method at room temperature

GJB 6476-2008 Test method for compressive properties of continuous fiber-reinforced ceramic composites at ambient temperature
GJB 6475-2008 Test method for tensile properties of continuous fiber-reinforced ceramic composites at ambient temperature

Military Standard of the People's Republic of China-General Armament Department, Composite material compression test method at room temperature

GJB 8737-2015 Test method for normal temperature compression properties of continuous fiber reinforced ceramic matrix composites
GJB 8736-2015 Test method for tensile properties at room temperature of continuous fiber reinforced ceramic matrix composites
GJB 10311-2021 Test method for high temperature mechanical properties of continuous fiber reinforced ceramic matrix composites

Professional Standard - Aerospace, Composite material compression test method at room temperature

QJ 2755-1995 Test method for compressive properties of porous low-density composites

American National Standards Institute （ANSI), Composite material compression test method at room temperature

ANSI/ASTM E9:1989 Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

Professional Standard - Textile, Composite material compression test method at room temperature

FZ/T 60043-2014 3D braided polymer matrix composites.Test method for compression properties
FZ/T 60043-2013 Test method for compressive properties of resin-based three-dimensional braided composites

Group Standards of the People's Republic of China, Composite material compression test method at room temperature

T/CSRA 13-2021 Test method for compression properties of aramid fiber Ⅲ reinforced materials
T/CSTM 00189-2021 Refractory materials — Determination of poisson ratio at room temperature — Static compressive method
T/CSTM 00284-2020 Test method for open-hole compressive properties of fiber reinforced polymer matrix composite laminates
T/CSTM 00286-2020 Test method for compression after impact properties of fiber reinforced polymer matrix composite laminates
T/CSTM 00287-2020 Test method forparallel fiber direction compression properties ofunidirectional fiber reinforced polymer matrix composite laminates
T/CSTM 00653-2022 Test method for mechanical properties of fiber reinforced polymer matrix composites at ultra - low temperatures
T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
T/CSRA 15.1-2021 Test method for aging resistance of aramid fiber Ⅲ reinforced materials Part 1: high temperature resistance test method
T/CSRA 15.2-2021 Test method for aging resistance of aramid fiberⅢreinforced materials Part 2: temperature shock test method

GOSTR, Composite material compression test method at room temperature

GOST R 57756-2017 Polymer composites. Test method of lengthwise compression of vertical structural elements

European Committee for Standardization (CEN), Composite material compression test method at room temperature

EN ISO 20504:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO 20504:2022)
EN ISO 20504:2016 Fine ceramics (advanced ceramics@ advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature

Association Francaise de Normalisation, Composite material compression test method at room temperature

NF EN ISO 20504:2022 Céramiques techniques - Propriétés mécaniques des composites à matrice céramiques à température ambiante - Méthode de détermination des propriétés en compression
NF EN ISO 10722:2019 Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée - Endommagement causé par des matériaux granulaires (méthode d'essai en laboratoire)
NF G38-123*NF EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method)
NF B43-204*NF EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4 : determination of interlaminar shear strength by compression loading of notched test specimens.

British Standards Institution (BSI), Composite material compression test method at room temperature

BS EN ISO 20504:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature
BS ISO 14603:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature

International Organization for Standardization (ISO), Composite material compression test method at room temperature

ISO 20504:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature
ISO 10722:2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)
ISO 15733:2001 Fine ceramics (advanced ceramis, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre-reinforced composites at room temperature
ISO 14603:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature

GM Daewoo, Composite material compression test method at room temperature

GMKOREA EDS-T-7665-2011 Test Method for Determining Compressibility and Recovery of Gasket Materials

Korean Agency for Technology and Standards (KATS), Composite material compression test method at room temperature

KS L ISO 10059-2:2013 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
KS K ISO 10722:2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)

YU-JUS, Composite material compression test method at room temperature

JUS B.D8.318-1986 Refractories. Methods of phisical testing. Determination ofcreep constant compression atconstant temperature

国家市场监督管理总局、中国国家标准化管理委员会, Composite material compression test method at room temperature

GB/T 40396-2021 Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA）
GB/T 38989-2020 Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）
GB/T 13477.12-2018 Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature

German Institute for Standardization, Composite material compression test method at room temperature

DIN EN ISO 20504:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature (ISO 20504:2006); German version EN ISO 20504:2016
DIN EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN 658-4:2003
DIN SPEC 1017:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites; German version CEN/TS 15881:2009
DIN EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
DIN EN 658-4:2003-05 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN 658-4:2003
DIN EN 1007-6:2008-02 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature; German version EN 1007-6:2007
DIN EN ISO 10722:2020-03 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019); German version EN ISO 10722:2019

KR-KS, Composite material compression test method at room temperature

KS K ISO 10722-2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)

AT-ON, Composite material compression test method at room temperature

ONORM ENV 658-4-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of shear strength by compression loading of notched specimens

Danish Standards Foundation, Composite material compression test method at room temperature

DS/ENV 658-4:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 4: Determination of shear strength by compression loading of notched specimens
DS/EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens

Professional Standard - Machinery, Composite material compression test method at room temperature

JB/T 3730-2015 Test method for evaluating the thermal endurance properties of insulating combined flexible materials.Method of proof voltage test with wrapped tube
JB/T 3730-1999 Test methods for evaluating the thermal endurance properties of insulating combined flexible materials by mehtod of proof voltage test with wrapped tube

Lithuanian Standards Office , Composite material compression test method at room temperature

LST EN 658-4-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens

ES-UNE, Composite material compression test method at room temperature

UNE-EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens (Endorsed by AENOR in March of 2003.)
UNE-EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)

Standard Association of Australia （SAA）, Composite material compression test method at room temperature

AS 1774.26:1995 Refractories and refractory materials - Physical test methods Method 26: Creep in compression - Deformation under constant load and constant temperature

VN-TCVN, Composite material compression test method at room temperature

TCVN 6614-3-1-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 3-1: Methods specific to PVC compounds.Pressure test at high temperature.Tests for resistance to cracking