ZH
RU
ES

Principle of Automatic Viscosity Measurement

Principle of Automatic Viscosity Measurement, Total:491 items.

In the international standard classification, Principle of Automatic Viscosity Measurement involves: Glass, Crude petroleum, Petroleum products in general, Measurement of volume, mass, density, viscosity, Vocabularies, Thermodynamics and temperature measurements, Construction materials, Plastics, Lubricants, industrial oils and related products, Fluid power systems, Aerospace electric equipment and systems, Waxes, bituminous materials and other petroleum products, Cereals, pulses and derived products, Fuels, Raw materials for rubber and plastics, Equipment for petroleum and natural gas industries, Products of the chemical industry, Adhesives, Hydraulic fluids, Paint ingredients, Air quality, Insulating fluids, Inorganic chemicals, Materials for the reinforcement of composites, Explosion protection, Testing of metals, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements, Leather technology, Rubber and plastics products, Road engineering, Animal feeding stuffs, Protection against dangerous goods, Medical sciences and health care facilities in general, Laboratory medicine, Integrated circuits. Microelectronics, Beverages, Particle size analysis. Sieving, Paper and board, Tea. Coffee. Cocoa, Pulps, Analytical chemistry, Metrology and measurement in general, Energy and heat transfer engineering in general, Water quality, Transformers. Reactors, Quality, Reinforced plastics, Metalliferous minerals.

YU-JUS, Principle of Automatic Viscosity Measurement

JUS B.E8.300-1989 Glass. Viscosity and viscometric fixed points. Principies for detarmining viscosity and viscometric fixed points
JUS B.H8.022-1981 Testing of petroleum products — Determination ofkinematic viscosity of transparent and opaque liquids andcalculation ofdynamic viscosity
JUS B.B7.114-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of Bulk setting density

CZ-CSN, Principle of Automatic Viscosity Measurement

CSN ISO 7884-1:1992 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
CSN 65 6216-1981 Petroleum products. Determination of kinematic viscosity and calculation of dynamic viscosity
CSN 72 1087-1975 Determination of apparent dynamic viscosity of ceramic suspensions by rotary viscosimeter. Identification of reological character of ceramic suspen- sions

International Organization for Standardization (ISO), Principle of Automatic Viscosity Measurement

ISO 7884-1:1987 Glass; Viscosity and viscometric fixed points; Part 1 : Principles for determining viscosity and viscometric fixed points
ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
ISO/DIS 18335 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
ISO/CD TR 6037 Automated liquid handling systems – Uncertainty of the measurement procedures
ISO 14678:2005 Adhesives - Determination of resistance to flow (sagging)
ISO 3104:1976 Petroleum products; Transparent and opaque liquids; Determination of kinematic viscosity and calculation of dynamic viscosity
ISO/DIS 3104 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 3104:2020 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO/FDIS 3104:2023 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 3104:2023 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO/DIS 23581 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
ISO 23581:2020 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
ISO 3104:1994 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 1: General principles
ISO 4578:1979 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
ISO/CD 1628-1:2004 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
ISO 2123:1972 Sodium and potassium silicates for industrial use; Determination of dynamic viscosity
ISO 11500:2022 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations
ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
ISO 8003:1985 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity
ISO 6721-1:1994 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
IWA 15-2015 Specification and method for the determination of performance of automated liquid handling systems
ISO 11343:2003 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method
ISO 11343:1993 Adhesives; determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions; wedge impact method
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
ISO 7935:1992 Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods
ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
ISO 23783-2:2022 Automated liquid handling systems — Part 2: Measurement procedures for the determination of volumetric performance
ISO 17179:2016 Stationary source emissions - Determination of the mass concentration of ammonia in flue gas - Performance characteristics of automated measuring systems
ISO 11343:2019 Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions — Wedge impact method
ISO 12185:1996/cor 1:2001 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method; Technical Corrigendum 1

German Institute for Standardization, Principle of Automatic Viscosity Measurement

DIN ISO 7884-1:1998 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987)
DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
DIN 53019-1:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
DIN 53018-1:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles
DIN 54270-1:1976-09 Testing of textiles; determination of the limit-viscosity of celluloses, principles
DIN 52007-1:2013 Bitumen and bituminous binders - Determination of viscosity - Part 1: General principles and evaluation
DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
DIN 53014-1:1994 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions
DIN 52007-1:2006 Bitumen and bituminous binders - Determination of viscosity - Part 1: General principles and evaluation
DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
DIN EN 12595:2007 Bitumen and bituminous binders - Determination of kinematic viscosity English version of DIN EN 12595:2007-06
DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
DIN EN 12595:2022 Bitumen and bituminous binders - Determination of kinematic viscosity; German and English version prEN 12595:2021
DIN EN 12595:2015-01 Bitumen and bituminous binders - Determination of kinematic viscosity; German version EN 12595:2014 / Note: To be replaced by DIN EN 12595 (2022-01).
DIN EN 12595:2022-01 Bitumen and bituminous binders - Determination of kinematic viscosity; German and English version prEN 12595:2021 / Note: Date of issue 2021-11-26*Intended as replacement for DIN EN 12595 (2015-01).
DIN EN ISO 18335:2023-06 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023 ...
DIN EN ISO 3104:2021-01 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020); German version EN ISO 3104:2020 / Note: To be replaced by DIN EN ISO 3104 (2022-11).
DIN EN ISO 3104:2022-11 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2022); German and English version prEN ISO 3104:2022 / Note: Date of issue 2022-10-14*Intended as replacement ...
DIN 66137-1:2003 Determination of solid state density - Part 1: Principles
DIN 66137-1:2019-03 Determination of solid state density - Part 1: Principles
DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
DIN EN 16896:2017-02 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter; German version EN 16896:2016 / Note: To be replaced by DIN EN ISO 23581 (2019-03).
DIN 53018-2:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers
DIN EN ISO 3104:1999 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999
DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN EN ISO 1628-1:2021-06 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021); German version EN ISO 1628-1:2021
DIN EN 12595:2015 Bitumen and bituminous binders - Determination of kinematic viscosity; German version EN 12595:2014
DIN EN 12595:2023-09 Bitumen and bituminous binders - Determination of kinematic viscosity; German version EN 12595:2023
DIN EN 61868:1999 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures (IEC 61868:1998); German version EN 61868:1999
DIN 54270-1:1976 Testing of textiles; determination of the limit-viscosity of celluloses, principles
DIN EN 13702:2018-12 Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method; German version EN 13702:2018
DIN 51659-2:2017-02 Lubricants - Test methods - Part 2: Determination of the kinematic viscosity of used lubricating oils by Stabinger viscometer
DIN 51659-3:2017-02 Lubricants - Test methods - Part 3: Determination of the kinematic viscosity of used lubricating oils by Houillon viscometer
DIN EN 13302:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
DIN EN 13302:2018-08 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus; German version EN 13302:2018
DIN SPEC 52022:2014 Bitumen and bituminous binders - Determination of fixation strength of polymer modified binders for surface treatments
DIN V 52022:2005 Bitumen and bituminous binders - Determination of fixation strength of polymer modified binders for surface treatments
DIN CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version CEN/TS 15324:2008
DIN EN ISO 23581:2023-06 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO/DIS 23581:2023); German and English version prEN ISO 23581:2023 / Note: Date of issue 2023-04-28*Intended as replacement for DIN E...
DIN 51659-3:2017 Lubricants - Test methods - Part 3: Determination of the kinematic viscosity of used lubricating oils by Houillon viscometer
DIN EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020); German version EN ISO 3104:2020
DIN EN 62021-1:2004 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration (IEC 62021-1:2003); German version EN 62021-1:2003
DIN EN ISO 16911-2:2013-06 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems (ISO 16911-2:2013); German version EN ISO 16911-2:2013
DIN 51659-2:2017 Lubricants - Test methods - Part 2: Determination of the kinematic viscosity of used lubricating oils by Stabinger viscometer
DIN 51659-1:2017-02 Lubricants - Test methods - Part 1: Determination of the kinematic viscosity of used lubricating oils by glass capillary viscometer
DIN EN 14953:2006-01 Surfaces for sports areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas; German version EN 14953:2005
DIN EN 14278-2:2004-05 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004
DIN 51659-1:2017 Lubricants - Test methods - Part 1: Determination of the kinematic viscosity of used lubricating oils by glass capillary viscometer
DIN EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003); German version EN ISO 11343:2005
DIN 53829-1:2014-12 Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of the force and extension on the running yarn, principles
DIN EN ISO 11343:2019 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)
DIN EN 13702:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method; German version EN 13702:2018
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN ISO 3104:2017 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2017); German and English version prEN ISO 3104:2017
DIN EN 12846-2:2023 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
DIN EN ISO 11343:2019-10 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019); German version EN ISO 11343:2019
DIN EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German version EN 13284-2:2004
DIN ISO 5725-1:1997 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
DIN EN 14522:2005 Determination of the auto ignition temperature of gases and vapours; English version of DIN EN 14522:2005
DIN 66136-1:2017-02 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles / Note: To be replaced by DIN 66136-1 (2022-12).
DIN EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009); English version of DIN EN ISO 1628-1:2009-07
DIN EN ISO 23581:2023 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO/DIS 23581:2023); German and English version prEN ISO 23581:2023

Korean Agency for Technology and Standards (KATS), Principle of Automatic Viscosity Measurement

KS L ISO 7884-1-2003(2018) Glass－Viscosity and viscometric fixed points－Part 1：Principles for determining viscosity and viscometric fixed points
KS B ISO 11500:2007 Hydraulic fluid power-Determination of particulate contamination by automatic counting using the light extinction principle
KS B ISO 11500:2014 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
KS M ISO 1628-1:2012 Plastics－Determination of the viscosity of polymers in dilute solution using capillary viscometers－Part 1：General principles
KS M ISO 3104:2021 Petroleum products — Transparent and opaque liquids —Determination of kinematic viscosity and calculation of dynamic viscosity
KS M ISO 3104:2022 Petroleum products — Transparent and opaque liquids —Determination of kinematic viscosity and calculation of dynamic viscosity
KS M ISO 23581:2022 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
KS A ISO 10075-2007(2022) Egronomic principles related to mental work-load－General terms and definitions
KS M ISO 3104:2008 Petroleum products－Transparent and opaque liquids－Determination
KS L ISO 7884-1:2003 Glass－Viscosity and viscometric fixed points－Part 1：Principles for determining viscosity and viscometric fixed points
KS L ISO 7884-2:2003 Glass－Viscosity and viscometric fixed points－Part 2：Determination of viscosity by rotation viscometers
KS P 1801-2013 Requirements for maintenance of chemical analysis equipments
KS M ISO 5628:2012 Paper and board-Determination of bending stiffness-General principles for two-point, three-point and four-point methods
KS M ISO 8003:2003 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Measurement of dynamic viscosity
KS M ISO 8003:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
KS M ISO 8003-2003(2008) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
KS C IEC 62021-1-2014(2019) Insulating liquids-determination of acidity — Part 1: Automatic potentiometric titration
KS H ISO 8460-2007(2021) Instant coffee－Determination of free-flow and compacted bulk densities
KS H ISO 8460-2007(2012) Instant coffee－Determination of free-flow and compacted bulk densities
KS I ISO 10396:2009 Stationary source emissions-Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS M ISO 11343:2010 Adhesives－Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions－Wedge impact method
KS A ISO 5725-1-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 1：General principles and definitions
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS B ISO 10849:2009 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
KS B ISO 7935:2009 Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
KS I ISO 7935:2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
KS I ISO 10849-2008(2018) Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
KS B ISO 10849-2003(2008) Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
KS B ISO 7935-2003(2008) Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
KS I ISO 7935-2006(2016) Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
KS I ISO 11370:2021 Water quality — Determination of selected organic plant-treatment agents — Automated multiple development(AMD) technique
KS I ISO 11370-2007(2012) Water quality－Determination of selected organic plant-treatment agents－Automated multiple development(AMD) technique
KS I ISO 7935:2006 Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
KS I ISO 10849:2008 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M ISO 11343:2020 Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions —Wedge impact method
KS E ISO 15967:2012 Direct reduced iron－Determination of the tumble and abrasion indices of hot briquetted iron(HBI)

Japanese Industrial Standards Committee (JISC), Principle of Automatic Viscosity Measurement

JIS K 2283:1993 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
JIS K 2283:2000 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
JIS K 7367-1:2002 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
JIS B 9934:2000 Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle
JIS B 9934:2012 Hydraulic fluid power -- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
JIS K 6865:1999 Adhesives -- Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions -- Wedge impact method

Professional Standard - Commodity Inspection, Principle of Automatic Viscosity Measurement

SN/T 3369-2012 Determination of kinematic viscosity of transparent and opaque liquids.Automated viscometer
SN/T 3518-2013 Determination for kinematic viscosity of petroleum products.Stabinger viscometer
SN/T 3100.1-2012 Iron ores.Determination of total iron content.Automatic photometric titration method

American Society for Testing and Materials (ASTM), Principle of Automatic Viscosity Measurement

ASTM D7042-16 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7279-18e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-16 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-18 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-20 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-14a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D8210-19a Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-20 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-18 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19b Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-22 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D7042-10 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-16e2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7483-13 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7483-08 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7945-14 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7945-15 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7945-20a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7483-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7483-20a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7945-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7945-20 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7483-20 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7945-21a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7483-13a(2017) Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7945-16 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D7042-04 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-12a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-14 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer 40;and the Calculation of Kinematic Viscosity41;
ASTM D7042-12e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-16e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7483-13a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7279-06 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-08 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7042-12 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D8092-17 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
ASTM D8092-22 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
ASTM D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D2983-21 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D445-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids &40;and Calculation of Dynamic Viscosity&41;
ASTM D445-17 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D2983-19e1 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-17 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-19 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-16 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-20 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D4889-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
ASTM D2983-04a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2983-04 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D4878-98 Standard Test Methods for Polyurethane Raw Materials Determination of Viscosity of Polyols
ASTM D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM E1382-97(2023) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D4889-98 Standard Test Methods for Polyurethane Raw Materials Determination of Viscosity of Crude or Modified Isocyanates
ASTM D4889-21 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
ASTM E1382-97(2015) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D5835-95 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2001) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D7110-14 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D4889-04(2011) Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM D5835-95(2013) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Association of German Mechanical Engineers, Principle of Automatic Viscosity Measurement

VDI/VDE 3512 Blatt 1-2009 Temperature measurement for building automation - Basic principles
VDI/VDE 3512 Blatt 1-2017 Temperature measurement for building automation - Basic principles
VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals

RO-ASRO, Principle of Automatic Viscosity Measurement

STAS SR ISO 7884-1:1995 Glass - Viscozity and viscometric fixed points Part 1: Principles for determining viscosity and viscometric fixed
STAS SR ISO 3104:1996 Petroleum products - Transparent and opaque liquids -Determination of kinematic viscosity and calculation of dynamic viscosity

British Standards Institution (BSI), Principle of Automatic Viscosity Measurement

BS EN ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles
21/30440288 DC BS EN 12595. Bitumen and bituminous binders. Determination of kinematic viscosity
BS EN ISO 3104:2020 Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
BS EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
BS EN 12595:2023 Tracked Changes. Bitumen and bituminous binders. Determination of kinematic viscosity
BS EN 61868:1999 Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
22/30427649 DC BS EN ISO 3104. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
17/30366325 DC BS EN ISO 3104. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
23/30463813 DC BS EN ISO 18335. Petroleum products and related products. Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density. Method by constant pressure viscometer
BS EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
BS ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS EN 13702:2018*BS 2000-513:2018 Bitumen and bituminous binders. Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
BS EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Method using an automatic thermodetection plate device
BS DD CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
19/30385422 DC BS EN ISO 23581. Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
BS EN 13302:2018 Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
20/30406580 DC BS EN ISO 1628-1. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Part 1. General principles
BS EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 13302:2018*BS 2000-505:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 14278-3:2004 Textiles - Determination of cotton fibres stickiness - Method using an automatic thermodetection rotating drum device
BS EN 13702:2018 Tracked Changes. Bitumen and bituminous binders. Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
BS EN 62021-1:2003 Insulating liquids - Determination of acidity - Automatic potentiometric titration
BS EN ISO 3104:1996 Methods of test for petroleum and its products - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
BS ISO 23783-2:2022 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
BS EN ISO 23783-2:2023 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
22/30429423 DC BS ISO 11500. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS EN 14493:2002 Structural adhesives - Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions - Wedge impact method
DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS ISO 11500:2022 Tracked Changes. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS ISO 6721-10:2001 Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 17179:2016 Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems
BS EN ISO 11343:2019 Tracked Changes. Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions. Wedge impact method
BS ISO 23783-3:2022 Automated liquid handling systems - Determination, specification and reporting of volumetric performance
BS EN ISO 23783-3:2023 Automated liquid handling systems - Determination, specification and reporting of volumetric performance
BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
BS EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus

Association Francaise de Normalisation, Principle of Automatic Viscosity Measurement

NF T60-122:2019 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity by automated Houillon viscometer
NF V03-744:1993 Rice. Determination of viscoelastic properties at various stages of cooking. Method using a viscolelastograph.
NF M07-097:2000 Émulsions eau dans gazole - Détermination de la viscosité cinématique et calcul de la viscosité dynamique
NF T51-061-1*NF EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles
NF EN ISO 1628-1:2021 Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de viscosimètres à capillaires - Partie 1 : principes généraux
NF EN 12595:2014 Bitumes et liants bitumineux - Détermination de la viscosité cinématique
NF T45-012:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of density-viscosity.
NF EN 16896:2018 Produits pétroliers et produits connexes - Détermination de la viscosité cinématique - Méthode avec le viscosimètre Stabinger
NF E48-658:1990 Hydraulic fluid power. Fluids. Determination of particulate contamination by automatic counting using the light interruption principle.
NF EN 13302:2018 Bitumes et liants bitumineux - Détermination de la viscosité dynamique des liants bitumineux à l'aide d'un viscosimètre tournant
NF EN ISO 3104:2020 Produits pétroliers - Liquides opaques et transparents - Détermination de la viscosité cinématique et calcul de la viscosité dynamique
NF M07-163*NF EN 16896:2018 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
NF EN 61868:1999 Huiles minérales isolantes - Détermination de la viscosité cinématique à très basse température
NF T66-056:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus.
NF EN 14953:2005 Sols sportifs - Détermination de l'épaisseur des sols minéraux non liés pour les terrains de sport de plein air
NF T60-100*NF EN ISO 3104:1996 Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity.
NF EN 14884:2022 Emissions de sources fixes - Détermination de la concentration en mercure total - Systèmes de mesurage automatisés
NF S66-260:2005 Determination of the auto ignition temperature of gases and vapours.
NF EN 1464:2010 Adhésifs - Détermination de la résistance au pelage des assemblages - Méthode des galets mobiles
NF T66-058*NF EN 13702:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen ans bituminous binder by the cone and plate method
NF T66-056*NF EN 13302:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
NF EN 13702:2018 BItumes et liants bitumineux - Détermination de la viscosité dynamique des bitumes et liants bitumineux par la méthode du cône et plateau
NF EN 62021-1:2004 Liquides isolants - Détermination de l'acidité - Partie 1 : titrage potentiométrique automatique
NF T51-061-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles.
NF EN 14954:2005 Sols sportifs - Détermination de la dureté du gazon naturel et des sols minéraux non liés pour terrains de sport de plein air
NF ISO 8003:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination de la viscosité dynamique.
NF ISO 23181:2007 Transmissions hydrauliques - Éléments filtrants - Détermination de la résistance à la fatigue due au débit en utilisant un fluide à haute viscosité
NF EN ISO 2064:2000 Revêtements métalliques et autres revêtements inorganiques - Définitions et principes concernant le mesurage de l'épaisseur
NF C27-261*NF EN 62021-1:2004 Insulating liquids - Determination of acidity - Part 1 : automatic potentiometric titration
NF EN ISO 16911-2:2013 Émissions de sources fixes - Détermination manuelle et automatique de la vitesse et du débit-volume d'écoulement dans les conduits - Partie 2 : systèmes de mesure automatiques
NF G07-220-3*NF EN 14278-3:2004 Determination of the stickiness of cotton fibres - Part 3 : method using an automatic thermodetection rotating drum device
NF EN ISO 11343:2019 Adhésifs - Détermination de la résistance dynamique au clivage de joints collés à haute résistance soumis aux conditions d'impact - Méthode d'impact au coin
NF T76-150*NF EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
NF T51-117-1:1996 Plastics. Determination of dynamic mechanical properties. Part 1 : general principles.
NF EN 13286-4:2021 Mélanges traités et mélanges non traités aux liants hydrauliques - Méthode d'essai de détermination en laboratoire de la masse volumique de référence et de la teneur en eau - Partie 4 : marteau vibrant
NF EN 14278-3:2004 Textiles - Détermination du collage des fibres de coton - Partie 3 : méthode utilisant un dispositif automatique de thermodétection à tambour rotatif
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF ISO 10396:2007 Émissions de sources fixes - Échantillonnage pour la détermination automatisée des concentrations d'émission de gaz pour des systèmes fixes de surveillance
NF T76-159:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method.
NF T66-058:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method.
NF G07-220-2*NF EN 14278-2:2004 Textiles - Determination of cotton fibres stickiness - Part 2 : method using an automatic thermodetection plate device
NF EN 14278-2:2004 Textiles - Détermination du collage des fibres de coton - Partie 2 : méthode utilisant un dispositif automatique à plateau de thermodétection
NF X43-333-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : automated measuring systems.
NF X43-553*NF ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems.
NF T77-106:1987 Basic silicones for industrial use. Determination of extrudability (fluidity) and of viscosity "casson". Method using standard extrusion nozzle.

NL-NEN, Principle of Automatic Viscosity Measurement

NEN 3026-1981 Petroleum products - Determination of kinematic viscosity by means of viscosimeters

国家市场监督管理总局、中国国家标准化管理委员会, Principle of Automatic Viscosity Measurement

GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
GB/T 25104-2019 Automatic measurement of water content in crude oil—RF method
GB/T 37838-2019 Pulp—Determination of dynamic viscosity number in cupri-ethylenediamine(CED) solution
GB/T 39452-2020 Leather—Physical and mechanical tests—Tests for adhesion of finish

Professional Standard - Aviation, Principle of Automatic Viscosity Measurement

HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle

RU-GOST R, Principle of Automatic Viscosity Measurement

GOST 32060-2013 Bitumens. Determination of kinematic viscosity
GOST EN 13302-2013 Bitumens and bituminous binders. Determination of dynamic viscosity
GOST 1929-1987 Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter
GOST 33768-2015 Method determination of kinematic viscosity and calculation of dynamic viscosity of transparent and opaque liquids
GOST R 53708-2009 Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 28254-1989 Mixed feeds, raw material. Methods for determination of volume mass and natural slope angle
PNST 11-2012 Automobile roads of general use. Viscous petroleum road bitumens. Determination of kinematic viscosity
PNST 6-2012 Automobile roads of general use. Viscous petroleum road bitumens. Test method determination of dynamic viscosity by rotational viscometer
GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST R IEC 62021-1-2013 Insulating liquids. Determination of acidity. Part 1. Automatic potentiometric titration method
GOST ISO 8460-2015 IInstant coffee. Determination of free-flow and compacted bulk densities
GOST 12395-1976 Pulp for insulating paper and board. Method for the determination of dynamic viscosity of copperammonium solution
GOST 33-2016 Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity
GOST 33111-2014 Engine oils. Method for determination of apparent viscosity at temperatures between - 5 °C and - 35 °C using the cold-cranking simulator
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST R ISO 10396-2012 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
GOST 33155-2014 Engine oils. Method for determination of yield stress and apparent viscosity at low temperature
GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method

Danish Standards Foundation, Principle of Automatic Viscosity Measurement

DS/EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
DS/EN 12595:2007 Bitumen and bituminous binders - Determination of kinematic viscosity
DS/EN ISO 3104/AC:2000 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DS/EN ISO 3104:1997 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DS/EN 61868:1999 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
DS/EN 13702:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method
DS/EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
DS/EN ISO 1628-1/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1
DS/EN ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2021)
DS/EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method
DS/EN 62021-1:2004 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration
DS/EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems
DS/EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodection plate device
DS/EN 14278-3:2004 Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device
DS/ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
DS/ISO 7935:1996 Stationary source emissions - Determination of the mass concentration of sulfur dioxide - Performance characteristics of automated measuring methods
DS/EN 12846-2:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN ISO 9396:2000 Plastics - Phenolic resins - Determination af the gel time at a given temperature using automatic apparatus
DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems

IT-UNI, Principle of Automatic Viscosity Measurement

UNI EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
UNI EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity

Professional Standard - Petroleum, Principle of Automatic Viscosity Measurement

SY/T 7547-2014 Determination of crude oil yield value by rotational viscometer

Lithuanian Standards Office , Principle of Automatic Viscosity Measurement

LST EN 12595-2007 Bitumen and bituminous binders - Determination of kinematic viscosity
LST EN ISO 3104+AC:2000 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
LST EN ISO 3104:2020 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
LST EN 61868-2001 Mineral insulating oils. Determination of kinematic viscosity at very low temperatures (IEC 61868:1998)
LST EN 13702-2010 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method
LST EN 13302-2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
LST EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
LST EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
LST EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)
LST EN 14278-3-2004 Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device
LST EN 14278-2-2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device
LST EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd.1:2012)
LST ISO 7935:2001 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
LST ISO 10849:2001 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
LST EN 12846-2-2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
LST EN 62021-1-2004 Insulating liquids. Determination of acidity. Part 1: Automatic potentiometric titration (IEC 62021-1:2003)
LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems

European Committee for Standardization (CEN), Principle of Automatic Viscosity Measurement

EN 12595:2014 Bitumen and bituminous binders - Determination of kinematic viscosity
EN 12595:2023 Bitumen and bituminous binders - Determination of kinematic viscosity
EN 12024:1996 Self adhesive tapes - Measurement of resistance to elevated temperature and humidity
EN 16896:2016 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
EN ISO 1628-1:1998 Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles ISO 1628-1:1998
EN ISO 3104:2020 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
EN 12595:1999 Bitumen and Bituminous Binders - Determination of Kinematic Vicosity Ratified European Text
prEN ISO 3104 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2022)
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
EN 1464:1994 Adhesives - Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating Roller Method (ISO 4578:1990 Modified)
EN 13702:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method [Superseded: CEN EN 13702-1]
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device
prEN 12846-2-2021 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders

AENOR, Principle of Automatic Viscosity Measurement

UNE-EN 12595:2015 Bitumen and bituminous binders - Determination of kinematic viscosity
UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
UNE-EN 61868:1999 MINERAL INSULATING OILS. DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES.
UNE-EN ISO 3104:1996 PETROLEUM PRODUCTS. TRANSPARENT AND OPAQUE LIQUIDS. DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY. (ISO 3104:1994).
UNE 84043:2003 Cosmetic raw materials. Sodium carboxymethycellulose. Viscosity determination of aqueous solutions.
UNE-EN 13702:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method
UNE-EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
UNE-EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
UNE-EN 62021-1:2004 Insulating liquids - Determination of acidity -- Part 1: Automatic potentiometric titration
UNE-EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)
UNE-EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device
UNE-EN 14278-3:2004 Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device
UNE-EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
UNE 77222:1996 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF SULFUR DIOXIDE. PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING METHODS.
UNE 77224:2000 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems.
UNE-EN 12846-2:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
UNE-EN ISO 16911-2:2014 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems (ISO 16911-2:2013)
UNE-EN ISO 12185:1999 CRUDE PETROLEUM AND PETROLEUM PRODUCTS. DETERMINATION OF DENSITY. OSCILLATING U-TUBE METHOD (ISO 12185:1996)
UNE-ISO 10396:2009 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
UNE 56536:1977 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHTAGAINST DYNAMIC FLEXION.

International Telecommunication Union (ITU), Principle of Automatic Viscosity Measurement

ITU-T P.76-1988 DETERMINATION OF LOUDNESS RATINGS; FUNDAMENTAL PRINCIPLES
ITU-T P.76 FRENCH-1988 DETERMINATION OF LOUDNESS RATINGS; FUNDAMENTAL PRINCIPLES
ITU-T P.76 SPANISH-1988 DETERMINATION OF LOUDNESS RATINGS; FUNDAMENTAL PRINCIPLES
ITU-T P.78-1996 Subjective Testing Method for Determination of Loudness Ratings in Accordance with Recommendation P.76 - Telephone Transmission Quality Measurements Related to Speech Loudness Study Group 12; 21 pp

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of Automatic Viscosity Measurement

GB/T 5547-1985 Resin finishing agent--Determination of the viscosity
GB 5547-1985 Resin finishing agent－Determination of the viscosity
GB/T 25104-2010 Crude oil-automatic determination of water-RF method
GB/T 26930.11-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 11:Determination of dynamic viscosity
GB/T 1661-1982 Measuring method for kinematic viscosity of plasticizers(Engler method)
GB/T 1660-1982 Measuring method for kinematic viscosity of plasticizers(Pinkevitch method)
GB/T 5561-1994 Surface active agents--Determination of viscosity and flow properties using a rotational viscometer
GB/T 5561-2012 Surface active agents.Determination of viscosity and flow properties using a rotational viscometer
GB/T 23144-2008 Paper and board.Determination of bending stiffness by static methods.General principle
GB/T 15357-2014 Surface active agents and detergents.Determination of viscosity and flow properties of liquid products using a rotational viscometer

IN-BIS, Principle of Automatic Viscosity Measurement

IS 1448 Pt.25-1976
IS 1206 Pt.3-1978
IS 13858-1993 Instant tea - determination of free-flow and compacted bulk densities
IS 7016 Pt.5-1987

BELST, Principle of Automatic Viscosity Measurement

STB 2188-2011 Bitumen and bituminous binder. Method for determination of dynamic viscosity

American National Standards Institute （ANSI), Principle of Automatic Viscosity Measurement

ANSI/ASTM D4889:1998 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates (08.03)

TH-TISI, Principle of Automatic Viscosity Measurement

TIS 1801-1999 Petroleum products.transparent and opaque liquids determination of kinematic viscosity and calculation of dynamic viscosity

KR-KS, Principle of Automatic Viscosity Measurement

KS M ISO 3104-2022 Petroleum products — Transparent and opaque liquids —Determination of kinematic viscosity and calculation of dynamic viscosity
KS M ISO 3104-2021 Petroleum products — Transparent and opaque liquids —Determination of kinematic viscosity and calculation of dynamic viscosity
KS M ISO 23581-2022 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
KS I ISO 7935-2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
KS I ISO 11370-2021 Water quality — Determination of selected organic plant-treatment agents — Automated multiple development(AMD) technique
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M ISO 11343-2020 Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions —Wedge impact method

ES-UNE, Principle of Automatic Viscosity Measurement

UNE-EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
UNE-EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
UNE-EN 13702:2019 Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
UNE-EN 13302:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
UNE-EN ISO 11343:2020 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Principle of Automatic Viscosity Measurement

ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

VN-TCVN, Principle of Automatic Viscosity Measurement

TCVN 7502-2005 Bitumen.Test method for determination of kinematic viscosity
TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities
TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
TCVN 6501-1999 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Performance characteristics of automated measuring systems

BE-NBN, Principle of Automatic Viscosity Measurement

NBN T 03-239-1980 Sodium and potassium silicates for industrial use - Determination of dynamic viscosity
NBN S 21-107-1988 Components ol automatic fire detection Systems Part 7 : Point type smoke detectors - Detectors using scattered light, transmitted light or ionization
NBN T 03-485-1988 Carbonaceous materials used in the production of aluminium - Pitch for eletrodes- Measurement of dynamic viscosity

International Electrotechnical Commission (IEC), Principle of Automatic Viscosity Measurement

IEC 61868:1998 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
IEC 62021-1:2003 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration

海关总署, Principle of Automatic Viscosity Measurement

SN/T 5350.1-2021 Determination of sulfur acidity by automatic potentiometric titration

Standard Association of Australia （SAA）, Principle of Automatic Viscosity Measurement

AS/NZS 2341.4:2015
AS 2341.4:2023 Methods of testing bitumen and related roadmaking products, Method 4: Determination of dynamic viscosity by rotational viscometer
AS 1180.4B:1972 Methods of test for hose made from elastomeric materials - Ply adhesion - Autographic method
AS 2313.2.6:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining the thickness of release liner
AS 2341.4:1994 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by rotational viscometer
AS 2341.3:2020 Methods of testing bitumen and related roadmaking products, Method 3: Determination of kinematic viscosity by flow through a capillary tube

AT-ON, Principle of Automatic Viscosity Measurement

OENORM EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
OENORM EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)

CH-SNV, Principle of Automatic Viscosity Measurement

SN EN ISO 3104:2021 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
SN EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)

PL-PKN, Principle of Automatic Viscosity Measurement

PN-EN ISO 3104-2021-03 E Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
PN C04208-1990 Raw-rubber and rubber compounds Dctcrmination ol' viscosity and rat? ol curc by thc Mooney viscometer
PN C04150-1988 Petroleum products Determination of apparent viscosity of engine oils al Iow temperatur? using the Cold-Cranking-Sirnulator
PN D04201-1959 Physical and mechanical properties of wood-based materials -- Determination of shear strength of adhesive joint of coreboards

Hebei Provincial Standard of the People's Republic of China, Principle of Automatic Viscosity Measurement

DB13/T 5026.1-2019 Determination of physical properties of graphene conductive paste Part 1: Determination of paste viscosity rotational viscometer method

European Committee for Electrotechnical Standardization（CENELEC）, Principle of Automatic Viscosity Measurement

EN 61868:1999 Mineral insulating oils Determination of kinematic viscosity at very low temperatures
EN 62021-1:2003 Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration

Yunnan Provincial Standard of the People's Republic of China, Principle of Automatic Viscosity Measurement

DB53/T 748-2016 Determination of industrial silicon powder particle size by automatic vibrating sieve method

ES-AENOR, Principle of Automatic Viscosity Measurement

UNE 103-301-1994 Determination of a soil density. Method de balance witch water bath

CEN - European Committee for Standardization, Principle of Automatic Viscosity Measurement

PREN 13702-2016 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder by cone and plate method - Cone and plate method
EN ISO 11343:2019 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method

Military Standard of the People's Republic of China-General Armament Department, Principle of Automatic Viscosity Measurement

GJBz 20058.3-1991(XG1-2015) Method for determination of physical constants of poisons - Determination of viscosity (Pine's method) Modification sheet 1-2015
GJB 1264.4-1994 Test method for aviation turbine engine lubricating oil. Method for determination of viscosity and viscosity change after standing at low temperature.

Group Standards of the People's Republic of China, Principle of Automatic Viscosity Measurement

T/BHES 1-2022 Determination of total water hardness and calcium and magnesium automatic potentiometric titration
T/CHES 27-2019 Water Quality Determination of Ammonia Nitrogen Automatic Analysis Nessler's Reagent Spectrophotometry

Professional Standard - Chemical Industry, Principle of Automatic Viscosity Measurement

HG/T 2756-1996 Determination of Gel Time of Phenolic Resin at a Given Temperature Using an Automatic Measuring Apparatus

FI-SFS, Principle of Automatic Viscosity Measurement

SFS-ISO 1628/1 E:1986 Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution.part 1:General conditions

国家能源局, Principle of Automatic Viscosity Measurement

SH/T 0956-2017 Determination of kinematic viscosity of transparent and opaque liquids by folding tube automatic viscometer method

Professional Standard - Electron, Principle of Automatic Viscosity Measurement

SJ/T 10402-1993 General principles of measuring methods for automatic music selectors of semiconductor audio integrated circuits

NZ-SNZ, Principle of Automatic Viscosity Measurement

NZS 4402.6.3.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.2: Alternative Method Using Autographic Apparatus
AS/NZS 4475.6:1997 Restraint Systems for Motor Vehicles - Performance Tests Method 6: Determination of Free-End Device Strength

Professional Standard - Petrochemical Industry, Principle of Automatic Viscosity Measurement

SH/T 0618-1995 Dynamic Viscometry of Lubricating Oils under High Shear Conditions (Levan Felt Method)

HU-MSZT, Principle of Automatic Viscosity Measurement

MSZ KGST 1882-1979

Professional Standard - Energy, Principle of Automatic Viscosity Measurement

NB/SH/T 0868-2013 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method