ZH

RU

ES

Zinc Mass Atomic Mass

Zinc Mass Atomic Mass, Total:499 items.

In the international standard classification, Zinc Mass Atomic Mass involves: Non-ferrous metals, Soil quality. Pedology, Surface treatment and coating, Water quality, Nuclear energy engineering, Quantities and units, Metalliferous minerals, Farming and forestry, Astronomy. Geodesy. Geography, Applications of information technology, Textile fibres, Air quality, Analytical chemistry, Quality, Galvanic cells and batteries, Products of non-ferrous metals, Iron and steel products, Ferrous metals, Software development and system documentation, Electronic components in general, Non-metalliferous minerals, Jewellery, Crude petroleum, Pharmaceutics, Laboratory medicine, Powder metallurgy, Tobacco, tobacco products and related equipment, Radiation protection, Plastics, Testing of metals, Rubber, Mining and quarrying, Medical sciences and health care facilities in general, Medical equipment, Clothes, Fruits. Vegetables, Agricultural machines, implements and equipment, Animal feeding stuffs, Electricity. Magnetism. Electrical and magnetic measurements, Fertilizers, Wastes, Paper and board, Cereals, pulses and derived products, Terminology (principles and coordination), Power transmission and distribution networks, Electrical wires and cables, Biology. Botany. Zoology, Buildings, Petroleum products in general, Welding, brazing and soldering, Paints and varnishes, Information sciences. Publishing, Vocabularies.


IT-UNI, Zinc Mass Atomic Mass

Standard Association of Australia (SAA), Zinc Mass Atomic Mass

  • AS 4699:2000 Zinc and zinc alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method
  • AS/NZS ISO 19113:2004 Geographic information - Quality principles
  • AS 1881:1986 Zinc alloys - Casting ingots and castings - Quality requirements
  • AS 4595:1999 Copper, lead and zinc sulfide concentrates - Precision and bias of mass measurement techniques
  • AS ISO 12745:2016 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
  • AS 2292.2:1987 Methods for the analysis of solders - Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc - Flame atomic absorption spectrometric method
  • AS 1329.3:1994 Methods for the analysis of zinc and zinc alloys - Determination of aluminium content - Flame atomic absorption spectrometric method
  • AS 1329.7:1994 Methods for the analysis of zinc and zinc alloys - Determination of lead content - Flame atomic absorption spectrometric method
  • AS 1329.8:1994 Methods for the analysis of zinc and zinc alloys - Determination of cadmium content - Flame atomic absorption spectrometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Zinc Mass Atomic Mass

  • GB/T 17138-1997 Soil quality--Determination of copper, zinc--Flame atomic absorption spectrophotometry
  • GB/T 2973-2004 Zinc coated steel wire Test method for gravimetric determination of zinc coating
  • GB/T 5113-1985 Atomic mass unit and kilogram conversion tables
  • GB/T 21337-2008 Geographic information .Quality principles
  • GB/T 7475-1987 Water quality--Determination of copper, zinc, lead and cadmium--Atomic absorption spectrometry
  • GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
  • GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
  • GB/T 42511-2023 Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cemented carbide cobalt powder by flame atomic absorption spectrometry
  • GB/T 2131-1980 Determination of zinc content in cadmium--Atomic absorption spectrophotometric method
  • GB/T 4500-2003 Rubber--Determination of zinc content by atomic absorption spectrometry
  • GB/T 23739-2009 Soil quality.Analysis of available lead and cadmium contents in soils.Atomic absorption spectrometry
  • GB 7908-1999 Classification of forest tree seed quality
  • GB/T 20453-2006 Quality grades on products of persimmon
  • GB/T 20453-2022 Quality grades of products for persimmon
  • GB/T 26422-2010 Classification of Azadirachta indica seed quality
  • GB/T 24514-2009 Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • GB/T 6593-1996 Quality inspection provisions for electronic measuring instruments
  • GB/T 17139-1997 Soil quality--Determination of nickel--Flame atomic absorption spectrophotometry
  • GB/T 17136-1997 Soil quality--Determination of total mercury--Cold atomic absorption spectrophotometry
  • GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
  • GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
  • GB/T 12496.20-1999 Test methods of wooden activated carbon-Determination of zine content
  • GB 6141-2008 Quality grading of legume seeds
  • GB/T 26615-2011 Quality grading of the princes-feather(Amaranthus hypochondriacus L.) seeds
  • GB/T 26614-2011 Quality grading of the Chinese ephedra(Ephedra L.) seeds
  • GB/T 12689.8-1990 Zinc and zinc alloys--Determination of iron content--Flame atomic absorption spectrometric method
  • GB/T 12689.11-1990 Zinc and zinc alloys--Determination of antimony content--Flame atomic absorption spectrometric method
  • GB/T 12689.13-1990 Zinc and zinc alloys--Determination of aluminium content--Electrothermal atomic absorption spectrometric method
  • GB/T 12689.7-1990 Zinc and zinc alloys--Determination of magnesium content--Flame atomic absorption spectrometric method
  • GB/T 12689.9-1990 Zinc and zinc alloys--Determination of copper content--Flame atomic absorption spectrometric method
  • GB/T 12689.10-1990 Zinc and zinc alloys--Determination of lead content--Flame atomic absorption spectrometric method
  • GB/T 12689.12-1990 Zinc and zinc alloys--Determination of cadmium content--Flame atomic absorption spectrometric method
  • GB/T 6730.53-2004 Iron ores-Determination of zinc content-Flame atomic absorption spectrometric method
  • GB/T 17137-1997 Soil quality--Determination of total chromium--Flame atomic absorption spectrophotometry
  • GB/T 12689.7-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of magnesium content-The flame atomic absorption spectrometric method
  • GB/T 12689.3-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of cadmium content-The flame atomic absorption spectrometric method
  • GB 6142-2008 Quality grading of the grass seeds

VN-TCVN, Zinc Mass Atomic Mass

  • TCVN 6193-1996 Water quality.Determination of cobalt nickel, copper, zinc, cadmium, and lead.Flame atomic absorption spectrometric methods
  • TCVN 7724-2007 Water quality.Determination of merdury.Method using atomic fluorescence spectrometry

Professional Standard - Aviation, Zinc Mass Atomic Mass

  • HB 5035-1977 Zinc coating quality inspection
  • HB 5035-1992 Zinc coating quality inspection
  • HB 5066-1977 Quality inspection of spray galvanized layer (trial implementation)
  • HB 6731.3-1993 Determination of Zinc Content in Aluminum Alloys by Atomic Absorption Spectrometry

Association Francaise de Normalisation, Zinc Mass Atomic Mass

  • NF EN 1233:1996 Qualité de l'eau - Dosage du chrome - Méthodes par spectrométrie d'absorption atomique
  • NF EN ISO 17852:2008 Qualité de l'eau - Dosage du mercure - Méthode par spectrométrie de fluorescence atomique
  • NF EN ISO 12020:2000 Qualité de l'eau - Dosage de l'aluminium - Méthodes par spectrométrie d'absorption atomique
  • NF EN ISO 7980:2000 Qualité de l'eau - Dosage du calcium et du magnésium - Méthode par spectrométrie d'absorption atomique
  • NF X43-275:2002 Qualité de l'air - Air des lieux de travail - Dosage d'éléments présents dans l'air des lieux de travail par spectrométrie atomique
  • NF T90-113-1:2007 Water quality - Determination of mercury - Method using atomic absorption spectrometry.
  • NF Z52-018:2005 Geographic information - Quality principles.
  • NF EN ISO 15586:2004 Qualité de l'eau - Dosage des éléments traces par spectrométrie d'absorption atomique en four graphite
  • NF T90-139*NF EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
  • XP CEN/TS 17633:2022 Principes généraux et exigences concernant les essais relatifs à la qualité et aux teneurs en nicotine des liquides pour cigarettes électroniques
  • NF ISO 11813:2010 Lait et produits laitiers - Détermination de la teneur en zinc - Méthode par spectrométrie d'absorption atomique avec flamme
  • NF A08-825:1973 Analyse chimique des alliages de zinc - Dosage de l'aluminium - Méthode par absorption atomique.
  • NF EN ISO 12846:2012 Qualité de l'eau - Dosage de mercure - Méthode par spectrométrie d'absorption atomique (SAA) avec et sans enrichissement
  • NF EN 14084:2003 Produits alimentaires - Dosage des éléments traces - Détermination du plomb, du cadmium, du zinc, du cuivre et du fer par spectrométrie d'absorption atomique (AAS) après digestion par micro-ondes
  • NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.

RU-GOST R, Zinc Mass Atomic Mass

  • GOST 23957.2-2003 Zinc. Atomic-absorption method for determination of tin
  • GOST 23957.2-1980 Zinc. Atomic-absorbic method for the determination of tin
  • GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
  • GOST 27869-1988 High purity substances. Method for concentration of microimpurities by ion exchange
  • GOST R 51705.1-2001 Quality systems. HACCP principles for food products quality management. General requirements
  • GOST R 55753-2013 Complex quality control system. Electronic components. Requirements quality assurance and quality control
  • GOST 25363-1982 Zinc concentrates. Atomic-absorption methods for the determination of gold and silver contents
  • GOST 26100-1984 Copper concentrates. Determination of lead, zinc, cadmium. Flame atomic absorption method
  • GOST R 57532-2017 Dusts of non-ferrous metallurgy enterprises. Methods of zinc mass content measuring
  • GOST 10429-1963 Kenaf seed. Sowing characterictics
  • GOST 22617.6-1977 Seeds of sugar beet. Documentation for quality
  • GOST 34249-2017 Feed, feed raw materials. Detection of mass fraction of chromium by electrothermal atom absorbtion spectrometric method
  • GOST R ISO 17925-2012 Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
  • GOST R 56372-2015 Mixed feed, concentrates and premixes. Determination of mass fraction of iron, manganese, zinc, cobalt, copper, molybdenum and selenium by atomic absorption spectroscopy method
  • GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
  • GOST 4.200-1978 Quality index system. Building. General principles
  • GOST 14047.2-1978 Lead concentrates. Determination of copper and zinc by polarographic, complexometric and atomic absorption methods

BE-NBN, Zinc Mass Atomic Mass

  • NBN T 94-402-1977 Determination of the zinc mass in particles collected by air fil-tration - Atomic absorption spectrophotometry
  • NBN X 50-002-2-1989 Quality management and quality System elements - Guidelines
  • NBN P 32-012-1977 Zinc alloys - Determination of magnesium content -Atomic absorption method

Indonesia Standards, Zinc Mass Atomic Mass

  • SNI 06-1137-1989 Water, Test methods for zinc content
  • SNI ISO 19113:2011 Geographic information - Quality principles
  • SNI 19-7119.8-2005 Ambient atmospheres - Part 8: Test methods of oxidant content by neutral buffer potassium iodide using spectrophotometers
  • SNI 01-7138-2005 The quality of teakwood (Tectona grandis Linn f.) seeds
  • SNI 06-2513-1991 Water, Test methods for chromium content by carbon stove atomic absorption spectrophotometer apparatus
  • SNI 06-2515-1991 Water, Test method for copper content by atomic absorption spectrophotometer in an extraction manuver
  • SNI 06-2472-1991 Test methods for cobalt content in water by carbon stoves atomic absorption spectrophotometer apparatus
  • SNI 06-2516-1991 Water, Test method for copper content by carbon stove atomic absorption spectrophotometer apparatus

AENOR, Zinc Mass Atomic Mass

  • UNE 36371-4:1986 DETERMINATION OF THE TIN COATING MASS. ATOMIC ABSORPTION METHOD
  • UNE 38173:1996 MAGNESIUM ALLOYS. DETERMINATION OF ZINC CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

HU-MSZT, Zinc Mass Atomic Mass

Professional Standard - Nuclear Industry, Zinc Mass Atomic Mass

  • EJ/T 842-1994 Zinc Isotope Ratio and Zinc Content Measurement Double Dilution Mass Spectrometry

SE-SIS, Zinc Mass Atomic Mass

(U.S.) Ford Automotive Standards, Zinc Mass Atomic Mass

British Standards Institution (BSI), Zinc Mass Atomic Mass

  • BS EN ISO 12020:2000 Water quality - Determination of aluminium - Atomic absorption spectrometric methods
  • BS EN ISO 15586:2003 Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • BS ISO 6101-1:2019 Rubber. Determination of metal content by atomic absorption spectrometry - Determination of zinc content
  • BS EN 15267-1:2023 Air quality. Assessment of air quality monitoring equipment. General principles of certification
  • BS EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
  • PD ISO/TS 16727:2013 Soil quality. Determination of mercury. Cold vapour atomic fluorescence spectrometry (CVAFS)
  • BS ISO/IEC 25021:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
  • BS 443:1982 Specification for testing zinc coatings on steel wire and for quality requirements
  • 21/30412632 DC BS EN 17633. General principles and requirements for testing for quality and nicotine levels of e-liquids
  • BS ISO 13543:2016 Copper, lead, zinc and nickel sulfide concentrates. Determination of mass of contained metal in a lot
  • BS ISO 12745:2008 Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques
  • BS 7850-1:1992 Total quality management - Guide to management principles
  • BS ISO 13310:1997 Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method

European Committee for Standardization (CEN), Zinc Mass Atomic Mass

  • EN 1233:1996 Water Quality - Determination of Chromium - Atomic Absorption Spectrometric Methods
  • EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
  • EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)

Japanese Industrial Standards Committee (JISC), Zinc Mass Atomic Mass

  • JIS K 0400-55-20:1998 Water quality -- Determination of cadmium by atomic absorption spectrometry
  • JIS X 7113:2004 Geographic information -- Quality Principles
  • JIS K 0400-52-20:1998 Water quality -- Determination of cobalt, nickel, copper, zinc, cadmium and lead -- Flame atomic absorption spectrometric methods
  • JIS X 25021:2014 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Quality measure elements

German Institute for Standardization, Zinc Mass Atomic Mass

  • DIN EN ISO 12020:2000 Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000
  • DIN EN 1233:1996 Water quality - Determination of chromium - Atomic absorption spectrometric methods; German version EN 1233:1996
  • DIN EN 17633:2021 General principles and requirements for testing for quality and nicotine levels of e-liquids; German and English version prEN 17633:2021
  • DIN CEN/TS 17633:2022-12 General principles and requirements for testing of quality and nicotine levels of electronic cigarette liquids; German version CEN/TS 17633:2022
  • DIN EN ISO 15586:2004 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003); German version EN ISO 15586:2003
  • DIN 50990:1993 Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS
  • DIN VDE 0472-801:1986 Testing of cables, wires and flexible cords; quality of zinc coatings
  • DIN ISO 20279:2006 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005);English version of DIN ISO 20279:2006-01
  • DIN EN ISO 15586:2004-02 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003); German version EN ISO 15586:2003

CZ-CSN, Zinc Mass Atomic Mass

CU-NC, Zinc Mass Atomic Mass

RO-ASRO, Zinc Mass Atomic Mass

  • STAS 2430/1-1984 COPPER-ZINC ALLOY PLATES Technical requirements for quality
  • STAS 289/1-1988 COPPER-ZINC AI.LOY PLATES Quality technical requirements
  • STAS 390/1-1984 COPPER-ZINC ALLOYS WIRE Teehnical requirements for quality
  • STAS SR 13315-1996 Water quality - Iron determination - Spectrometric method of atomic absorption
  • STAS 11401-1980 COLD-FORMED ZINC COATED STEEL SECTIONS Technical requirements for quality
  • STAS 291/1-1984 COPPER-Z1NC ALLOYS ROl'ND BARS TcchnicaJ requireinents for quality
  • STAS 291/1-1989 COPPER ZINC ALI.OY ROUND BARS Quality tcchnical requirements
  • STAS 389/1-1984 RECTANGULAR COPPER-ZINC ALLOY BARS Tcclmical rcquiremenls for quality
  • STAS 521/1-1984 GOPPER-ZINC ALLOY DRAWN ROUND TUBES Quality technical requiremenls
  • STAS 6925/1-1986 ZINC ALLOYS FOR CASTING UNDER PRESSURE Grades and technical requircments for quality
  • STAS 808/1-1985 PRIMARY BATTER1ES General technical requirements for quality
  • STAS 292/1-1984 COPPER-ZINC ALLOY SQUARE DRAWN BARS Technical requirements for quality
  • STAS 293/1-1984 COPPER-ZINC ALLOY HEXAGO- NAL DRAWN BARS Technical requircments for quality
  • STAS 3439/1-1984 GOPPER-ZINC ALLOYS WITH NICKEL FOR SPR1NS Technical requirement for quality
  • STAS 1904/1-1989 Looms WOODEN SHUTTLES General technical requirements lor ?juality
  • STAS 7222-1974 Metallic coatings ELECTROPLATED COATINGS OF 7INC AND CADMIUM Techmical requirements for quality
  • STAS 7221-1990 Metallic coatings ZINC THERMAL COATINGS General technical requirements for quality
  • STAS SR 9042-1995 Mirrors. General technical requirements for qualite

Sichuan Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

  • DB51/T 769-2008 Quality management specification for seed quality inspection institutions
  • DB51/T 769-2012 Quality management specification for seed quality inspection institutions

CEN - European Committee for Standardization, Zinc Mass Atomic Mass

International Organization for Standardization (ISO), Zinc Mass Atomic Mass

  • ISO 19113:2002 Geographic information - Quality principles
  • ISO 3750:1976 Zinc alloys; Determination of magnesium content; Atomic absorption method
  • ISO/IEC TR 25021:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
  • ISO 4998:2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
  • ISO 4998:1977 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
  • ISO 4998:2023 Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality
  • ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
  • ISO 8288:1986 Water quality; Determination of cobalt, nickel, copper, zinc, cadmium and lead; Flame atomic absorption spectrometric methods
  • ISO 15586:2003 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • ISO 5961:1985 Water quality; Determination of cadmium; Flame atomic absorption spectrometric methods
  • ISO 13543:1996 Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot
  • ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
  • ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
  • ISO 15208:2022 Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
  • ISO 17925:2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • ISO 12745:2008 Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques
  • ISO 13543:2016 Copper, lead, zinc and nickel sulfide concentrates - Determination of mass of contained metal in a lot
  • ISO 3750:2006 Zinc alloys - Determination of magnesium content - Flame atomic absorption spectrometric method
  • ISO 4194:1981 Magnesium alloys; Determination of zinc content; Flame atomic absorption spectrometric method
  • ISO 13310:1997 Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method

ZA-SANS, Zinc Mass Atomic Mass

American National Standards Institute (ANSI), Zinc Mass Atomic Mass

Danish Standards Foundation, Zinc Mass Atomic Mass

  • DS/EN ISO 19113:2005 Geographic information - Quality principles
  • DS/EN ISO 15586:2004 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • DS/ISO/TS 16727:2013 Soil quality - Determination of mercury - Cold vapour atomic fluorescence spectrometry (CVAFS)

ANSI - American National Standards Institute, Zinc Mass Atomic Mass

Korean Agency for Technology and Standards (KATS), Zinc Mass Atomic Mass

  • KS X ISO 19113-2011(2016) Geographic information-Quality principles
  • KS D ISO 3750:2012 Zinc alloys-Determination of magnesium content-Flame atomic absorption spectrometric method
  • KS D ISO 17925-2006(2016) Zinc and/or aluminium based coatings on steel-Determination of coating mass per unit area and chemical composition-Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic
  • KS I ISO 15586-2010(2015) Water quality-Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • KS I ISO 11047:2019 Soil quality — Determination of cadmium, chromium, cobalt, copper,lead, manganese, nickel and zinc in aqua regia extracts of soil —Flame and electrothermal atomic absorption spectrometric methods
  • KS I ISO 8288:2007 Water quality-Determination of cobalt, nickel, copper, zinc, cadmium and lead-Flame atomic absorption spectrometric methods
  • KS I ISO 8288-2007(2012) Water quality-Determination of cobalt, nickel, copper, zinc, cadmium and lead-Flame atomic absorption spectrometric methods
  • KS I ISO 15586:2010 Water quality-Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • KS I ISO 15586:2022 Water quality ― Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • KS D ISO 7627-6-2012(2022) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 6:Determination of chromium in contents from 0.01 to 2 % (mass fraction)
  • KS D ISO 7627-6-2012(2017) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 6:Determination of chromium in contents from 0.01 to 2 % (mass fraction)
  • KS D ISO 17925:2006 Zinc and/or aluminium based coatings on steel-Determination of coating mass per unit area and chemical composition-Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • KS D ISO 17925:2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom
  • KS E ISO 13543:2003 Copper, lead and zinc sulfide concentrates-Determination of mass of contained metal in a lot
  • KS E ISO 13543:2020 Copper, lead, zinc and nickel sulfide concentrates —Determination of mass of contained metal in a lot
  • KS E ISO 13310-2003(2018) Iron ores-Determination of zinc content-Flame atomic absorption spectrometric method
  • KS I ISO 20279-2006(2011) Soil quality-Extraction of thallium and determination by electrothermal atomic absorption spectrometry
  • KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
  • KS D ISO 7627-4-2012(2017) Hardmetals-Chemical analysis by flame atomic absorption spectrometry-Part 4:Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
  • KS E ISO 12745:2018 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
  • KS I ISO 8288:2021 Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods

Inner Mongolia Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

未注明发布机构, Zinc Mass Atomic Mass

国家建筑材料工业局, Zinc Mass Atomic Mass

Liaoning Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Professional Standard - Agriculture, Zinc Mass Atomic Mass

Shandong Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

邢台市市场监督管理局, Zinc Mass Atomic Mass

Chongqing Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Anhui Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

中华人民共和国环境保护部, Zinc Mass Atomic Mass

  • GB 7475-1987 Water quality-Determination of copper,zinc,lead and cadmium-Atomlc absorption spectrometry

GOSTR, Zinc Mass Atomic Mass

  • GOST 27869-2019 High purity substances. Method for concentration of microimpurities by ion exchange
  • GOST R 8.984-2019 State system for ensuring the uniformity of measurements. Internal quality control of measurements in the field of the use of atomic energy

Professional Standard - Electron, Zinc Mass Atomic Mass

American Society for Testing and Materials (ASTM), Zinc Mass Atomic Mass

  • ASTM A526/A526M-85 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
  • ASTM A90/A90M-11 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A90/A90M-13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A385-00 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
  • ASTM A385-01 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
  • ASTM A385-08 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
  • ASTM A385/A385M-22 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
  • ASTM A90/A90M-95a(1999) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A90/A90M-13(2018) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A527/A527M-90 Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality
  • ASTM A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A90/A90M-09 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

IN-BIS, Zinc Mass Atomic Mass

Group Standards of the People's Republic of China, Zinc Mass Atomic Mass

TR-TSE, Zinc Mass Atomic Mass

  • TS 3177-1978 ZINC ALLOYS — DETERMINATION OF MAGNESIUM CONTENT — ATOMIC ABSORPTION METHOD
  • TS 3652-1981 METHODS FOR THE ANALYSIS OF WATER — DETERMINATION OF ZINC CONTENT — Zincon Spectrophotometry and Atomic Absorption Methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Zinc Mass Atomic Mass

  • GB/T 5195.7-2016 Fluorspar—Determination of zinc content—Flame atomic absorption spectrophotometric method
  • GB/T 35809-2018 Method for analysis of forestry biomass—Determination of protein content
  • GB/T 35408-2017 Quality management in E-commerce—Terminology

Yunnan Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

YU-JUS, Zinc Mass Atomic Mass

  • JUS C.A1.546-1990 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determi- natlon of chromium In ctmtents from 0,01 to 2 % (m/m)
  • JUS H.G8.022-1980 Reagents. Hydrochloric acid. Determination ofzinc content. Flame atomic absorption method
  • JUS H.G8.036-1981 Reagents. Sulphuric acid. Determination ofzinc content. Flame atomic absorption method
  • JUS C.A1.368-1991 Zinc and zine alloys. Determlnation of Indium and tballium content. Flame atomlc absorption spectrometrlc method
  • JUS H.G8.132-1984 Reagents. Ammonia solution. Determination of zine content. Flame atomic absorption method
  • JUS C.A1.363-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of cadmium by atomic absorpti-on spectrophotometry
  • JUS C.A1.362-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of lead by atomic absorption spec-trophotometry
  • JUS C.A1.364-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of copper by atomic absorption spec troph o tometry
  • JUS C.A1.359-1977 Methods for chemical analysis of zine and zine alloys. Determination of magnesium by atomic absorption spectrophotometry in zine alloys
  • JUS H.G8.340-1988 Reagents. Zine cblori?e. Determination of substances insoluble in bjdzochloric acid. Gravimetric method
  • JUS N.R1.135-1977 Electronic tubes. Testing of the glass quality

Professional Standard - Petroleum, Zinc Mass Atomic Mass

  • SY/T 7550-2000 Determination of wax,resins and asphaltenes contents in crude oil
  • SY/T 7550-2012 Determination of wax, resins and asphaltenes in crude oil
  • SY 7550-2012 Determination of Wax, Colloid and Asphaltene Content in Crude Oil
  • SY/T 7550-2004 Determination method of wax, colloid and asphaltenes in crude oil
  • SY/T 5132-2003 Quality requirements for original log information
  • SY/T 5132-1997 Quality requirements for original log information
  • SY/T 6242-1996 Gas Chromatography Analysis Method of Oleaginous Colloid Wax Content in Crude Oil
  • SY/T 7005-2014 Directives for data quality control and assessment
  • SY 7005-2014 Data Quality Control and Evaluation Principles
  • SY/T 5132-2012 Quality specifications for original petroleum logging information
  • SY 5132-2012 Quality specification for crude oil logging data

国家石油和化学工业局, Zinc Mass Atomic Mass

  • SY/T 7550-1999 Determination of wax, gum and asphaltene content in crude oil

国家药监局, Zinc Mass Atomic Mass

AT-ON, Zinc Mass Atomic Mass

  • OENORM EN 17633-2021 General principles and requirements for testing for quality and nicotine levels of e-liquids
  • ONORM ISO 8288:1988 Water quality; determination ofcobalt, nickel, copper, zinc, cadmium and lead; flame atomic absorption spectrometric methods
  • ONORM S 2080-1-1999 Quality requirements for secondary raw materials - Paper

ES-UNE, Zinc Mass Atomic Mass

  • UNE-CEN/TS 17633:2022 General principles and requirements for testing of quality and nicotine levels of electronic cigarette liquids (Endorsed by Asociación Española de Normalización in October of 2022.)

PL-PKN, Zinc Mass Atomic Mass

  • PN H04805-11-1991 Zinc powder Determination of acid insoluble matter content
  • PN C84081-48-1988 Salt (Sodium chloride) Determination of zinc Atomie absorption method
  • PN H04125-1992 Iron ores. Determination of lead and/or zinc content. Flame atomic absorption spectrometric method
  • PN P06729-1972 Hosiery from crimped yarns Grading of quality

TH-TISI, Zinc Mass Atomic Mass

  • TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles

Professional Standard - Commodity Inspection, Zinc Mass Atomic Mass

Guangxi Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Military Standard of the People's Republic of China-General Armament Department, Zinc Mass Atomic Mass

  • GJB 3984-2000 Quality supervision and quality control management of electronic countermeasures equipment

U.S. Military Regulations and Norms, Zinc Mass Atomic Mass

Tianjin Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Zhejiang Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Ningxia Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Qinghai Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Hunan Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

Shanxi Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

API - American Petroleum Institute, Zinc Mass Atomic Mass

Professional Standard - Geology, Zinc Mass Atomic Mass

  • DZ/T 0064.21-1993 Groundwater quality inspection methods- Electrothermal atomization atomic absorption spectrometry for the determination of copper, lead, zinc, cadmium, cobalt and chromium
  • DZ/T 0064.83-2021 Methods of analysis of groundwater quality - Part 83: Determination of copper, zinc, cadmium, nickel and cobalt by flame atomic absorption spectrophotometry

Professional Standard - Machinery, Zinc Mass Atomic Mass

  • JB/T 50047-1999 Measuring tools, measuring instruments, product quality grading, electronic plug gauges
  • JB/T 54283-1999 Measuring tools Measuring instruments Product quality grading Electronic digital calipers
  • JB/T 50139-1999 Quality classification of zinc-aluminum alloy bushings for construction machinery

KR-KS, Zinc Mass Atomic Mass

  • KS I ISO 11047-2019 Soil quality — Determination of cadmium, chromium, cobalt, copper,lead, manganese, nickel and zinc in aqua regia extracts of soil —Flame and electrothermal atomic absorption spectrometric methods
  • KS I ISO 15586-2022 Water quality ― Determination of trace elements using atomic absorption spectrometry with graphite furnace
  • KS D ISO 17925-2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom
  • KS E ISO 13543-2020 Copper, lead, zinc and nickel sulfide concentrates —Determination of mass of contained metal in a lot
  • KS E ISO 12745-2018(2023) Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
  • KS E ISO 12745-2018 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
  • KS I ISO 8288-2021 Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods

ES-AENOR, Zinc Mass Atomic Mass

Lithuanian Standards Office , Zinc Mass Atomic Mass

  • LST ISO 8288:1998 Water quality. Determination of cobalt, nickel, copper, zinc, cadmium and lead. Flame atomic absorption spectrometric methods
  • LST EN ISO 19113:2005 Geographic information - Quality principles (ISO 19113:2002)

Professional Standard - Petrochemical Industry, Zinc Mass Atomic Mass

  • SH/T 0242-1992 Determination of lead content in light petroleum products (atomic absorption spectrometry)
  • SH/T 0228-1992 Determination of barium, calcium and zinc content in lubricating oil (atomic absorption spectrometry)

The American Road & Transportation Builders Association, Zinc Mass Atomic Mass

  • AASHTO T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • AASHTO T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

AASHTO - American Association of State Highway and Transportation Officials, Zinc Mass Atomic Mass

  • T 65M/T 65-2006 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • T 65M/T 65-2011 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

Hebei Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

CN-STDBOOK, Zinc Mass Atomic Mass

  • 图书 A-4610 Quality inspection of textile raw materials and products

Professional Standard - Electricity, Zinc Mass Atomic Mass

  • DL/T 768.7-2002 Manufacture quality specification for electric power fittings hot dip galvanized coatings on fabricated iron and steel articles
  • DL/T 768.7-2012 Manufacture quality specification for electric power fittings hot dip galvanized coatings on fabricated iron and steel articles

Xinjiang Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

  • DB65/T 3010-2009 Quality grading of the princes.feather(Amaranthus hypochondriacus L.)seeds
  • DB65/T 3009-2009 Quality grading of the Chinese ephedra(EphedraL.)seeds

Gansu Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

工业和信息化部, Zinc Mass Atomic Mass

  • YS/T 1171.13-2021 Methods for chemical analysis of recycled zinc raw materials Part 13: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry

Professional Standard - Non-ferrous Metal, Zinc Mass Atomic Mass

  • YS/T 768-2011 Flame atomic absorption spectrometric analysis method of lithium in electrolyte cryolite

NL-NEN, Zinc Mass Atomic Mass

  • NEN-ISO 7627-6:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)

Guizhou Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

  • DB52/T 673-2010 Raw Tobacco Purification Processing Quality Control Regulations

Taiwan Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass

  • CNS 3382-1972 Method of Test for Existing Gum Content in Jet and Motor Fuels

PT-IPQ, Zinc Mass Atomic Mass

  • NP 525-1988 Zinc-coated products Determination of the mass per unit área and of the coating mean thickness

Professional Standard - Aerospace, Zinc Mass Atomic Mass

  • QJ 1970-1990 Quantitative rules for the quality certification of electronic products

Professional Standard - Press and Publication, Zinc Mass Atomic Mass

CL-INN, Zinc Mass Atomic Mass

Shaanxi Provincial Standard of the People's Republic of China, Zinc Mass Atomic Mass





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved