ZH
RU
ES

Tolerance class

Tolerance class, Total:86 items.

In the international standard classification, Tolerance class involves: Bearings, Elements of buildings, Linear and angular measurements, Horology, Screw threads, Materials for aerospace construction.


International Organization for Standardization (ISO), Tolerance class

  • ISO 2349:1973 Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class)
  • ISO 578:1973 Rolling bearings — Tapered roller bearings — Inch series — Tolerance classes 4 (normal tolerances), 3, 0 and 00
  • ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts

SE-SIS, Tolerance class

RO-ASRO, Tolerance class

  • STAS 8164-1984 ISO GENERAL PURPOSE METRIC SCREW THREADS Tolerances Classes 6H/6g
  • STAS 8100/3-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes for dimensions up to 3150 mm
  • STAS 8100/4-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes selection for dimensions up to 500 mm

Association Francaise de Normalisation, Tolerance class

  • NF P20-605*NF EN 1530:2000 Door leaves - General and local flatness - Tolerance classes.
  • NF EN 1529:2021 Vantaux de portes - Hauteur, largeur, épaisseur et équerrage - Classes de tolérances
  • NF P20-606:2000 Door leaves - Height, width, thickness and squareness - Tolerance classes.
  • NF P20-606*NF EN 1529:2021 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • NF EN 1530:2000 Vantaux de portes - Planéité générale et planéité locale - Classes de tolérances
  • NF L15-313*NF EN 2044:2002 Aerospace series - Round bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm inferior or equal to D inferior or equal to 63 mm - Dimensions
  • NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
  • NF L15-335*NF EN 2045:2002 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 6 mm inferior or equal to D inferior or equal to 50 mm - Dimensions

Danish Standards Foundation, Tolerance class

  • DS/EN 1530:2001 Door leaves - General and local flatness - Tolerance classes
  • DS/EN 1529:2001 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • DS/EN 20286-2:1993 ISO system of limits and fits. Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
  • DS/EN 2044:2002 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm < D < 63 mm - Dimensions
  • DS/EN 2045:2002 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions
  • DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
  • DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Lithuanian Standards Office , Tolerance class

  • LST EN 1530-2002 Door leaves - General and local flatness - Tolerance classes
  • LST EN 1529-2002 Doors leaves - Height, width, thickness and squareness - Tolerance classes
  • LST EN 2045-2002 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions
  • LST EN 2044-2002 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm < D < 63 mm - Dimensions

German Institute for Standardization, Tolerance class

  • DIN EN 1530:2000-06 Door leaves - General and local flatness - Tolerance classes; German version EN 1530:1999
  • DIN EN 1529:2022-02 Door leaves - Height, width, thickness and squareness - Tolerance classes; German version EN 1529:2021
  • DIN EN 1529:2020 Door leaves - Height, width, thickness and squareness - Tolerance classes; German and English version prEN 1529:2020
  • DIN EN 1529:2022 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • DIN 13-50:2017-05 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
  • DIN 13-50:2017 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
  • DIN 13-50:1999 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
  • DIN 13-25:2005-08 ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm
  • DIN 13-24:2005-08 ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm
  • DIN 13-23:2005-08 ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm
  • DIN 13-20:2000-08 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
  • DIN 13-26:2005-08 ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
  • DIN 13-22:2005-08 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
  • DIN 13-21:2005-08 ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
  • DIN EN 2045:2003 Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001
  • DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
  • DIN EN 2044:2003 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001

ES-UNE, Tolerance class

  • UNE-EN 1530:2001 ERRATUM DOOR LEAVES - GENERAL AND LOCAL FLATNESS - TOLERANCE CLASSES.
  • UNE-EN 1529:2022 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • UNE-EN 2045:2001 Aerospace series- Square bars, drawn in aluminium alloys- Tolerance class h 11- Thickness 6 mm<a<50 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
  • UNE-EN 2044:2001 Aerospace series- Round bars, drawn, in aluminium and aluminium alloys- Tolerance class h 11- Diameter 4 mm <D< 63 mm- Dimensions. (Endorsed by AENOR in February of 2002.)

AENOR, Tolerance class

  • UNE-EN 1530:2000 DOOR LEAVES - GENERAL AND LOCAL FLATNESS - TOLERANCE CLASSES
  • UNE-EN 1529:2000 DOOR LEAVES - HEIGHT, WIDTH, THICKNESS AND SQUARENESS - TOLERANCE CLASSES

British Standards Institution (BSI), Tolerance class

  • BS EN 1529:2000 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • 20/30426925 DC BS EN 1529. Door leaves. Height, width, thickness and squareness. Tolerance classes
  • BS EN 1529:2021 Tracked Changes. Door leaves. Height, width, thickness and squareness. Tolerance classes
  • BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
  • BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
  • BS EN 2046:2001 Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm a 50 mm - Dimensions
  • BS EN 2045:2001 Aerospace series - Square bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm a 50 mm - Dimensions
  • BS EN 2044:2001 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm D 63 mm - Dimensions

Society of Automotive Engineers (SAE), Tolerance class

  • SAE AS1338-2006 Aerospace Metric 60° Screw Thread Profile and Tolerance Classes

SAE - SAE International, Tolerance class

  • SAE AS1338A-2014 Aerospace Metric 60° Screw Thread Profile and Tolerance Classes

AT-ON, Tolerance class

  • OENORM EN 1529-2021 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • ONORM M 1310-1992 ISO-System of limits and fits - Selection of tolerance classes for dimensions up to 500 mm
  • ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
  • ONORM EN 20286-2-1993 ISO System of limits and fits - Part 2: Tables of Standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)

European Committee for Standardization (CEN), Tolerance class

  • prEN 1529-2020 Door leaves - Height, width, thickness and squareness - Tolerance classes
  • EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988

(U.S.) Ford Automotive Standards, Tolerance class

  • FORD W-GT2-1999 FLUSH PIN TYPE FOR MINIMUM THREAD DEPTH TOLERANCE CLASS 5H, 6H

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tolerance class

  • GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
  • GB/T 1800.2-2009 Geometrical Product Specifications (GPS) Limits and fits--Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts

Professional Standard - Light Industry, Tolerance class

  • QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes
  • QB/T 2267-2015 Limits and fits for timekeeping instruments.Standard tolerance value of inserted middle tolerance grade for nominal size up to 18 mm

American Welding Society (AWS), Tolerance class

  • AWS C4.6M-2006 Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances First Edition

Standard Association of Australia （SAA）, Tolerance class

  • AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

NL-NEN, Tolerance class

  • NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen

未注明发布机构, Tolerance class

  • BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts
  • BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

Korean Agency for Technology and Standards (KATS), Tolerance class

  • KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
  • KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
  • KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts

  Tolerance table, Forging tolerance, british tolerance, Forging Tolerance, Tolerance class, Forging Tolerance, Tolerance class, en tolerance, Drilling Tolerance, Annealing tolerance, Cyclic Tolerance, iso tolerance, Tolerance grade table, Industrial Tolerance, astm tolerance, balance tolerance, Die forging tolerance, Plastic Tolerance, class tolerance, Temperature Tolerance Class.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved