ZH
RU
ES

Energy Spectrometer for Scanning Electron Microscopy

Energy Spectrometer for Scanning Electron Microscopy, Total:157 items.

In the international standard classification, Energy Spectrometer for Scanning Electron Microscopy involves: Protection against crime, Optical equipment, Linear and angular measurements, Analytical chemistry, Air quality, Electronic display devices, Surface treatment and coating, Medical sciences and health care facilities in general, Construction materials, Optics and optical measurements, Paints and varnishes, Metrology and measurement in general, Physics. Chemistry, Iron and steel products, Ceramics, Semiconductor devices, Integrated circuits. Microelectronics, Paint ingredients, Textile fibres, Paper and board.

International Organization for Standardization (ISO), Energy Spectrometer for Scanning Electron Microscopy

ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
ISO 17751-2:2014 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 2: Scanning electron microscopy method
ISO 17751-2:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 2: Scanning electron microscopy method
ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning electron microscopy method
ISO 21915-1:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 1: Fibre identification using scanning electron microscopy and spectral analysis meth

Professional Standard - Judicatory, Energy Spectrometer for Scanning Electron Microscopy

SF/T 0139-2023

Korean Agency for Technology and Standards (KATS), Energy Spectrometer for Scanning Electron Microscopy

KS M 0044-1999
KS I 0051-1999(2019) General rules for scanning electron microscopy
KS D ISO 9220-2009(2022) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220-2009(2017) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS K ISO 17751-2:2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning electron microscopy method

American Society for Testing and Materials (ASTM), Energy Spectrometer for Scanning Electron Microscopy

ASTM E2382-04(2020) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E766-98(2003) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E766-98 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E986-97 Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E986-04(2017) Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E766-98(2008)e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-16 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
ASTM E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2090-00 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2142-08(2023) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E3284-23 Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E1588-16 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1588-16a Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM E1588-17 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM D605-82(1996)e1 Standard Specification for Magnesium Silicate Pigment (Talc)
ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E2090-06 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12(2020) Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy

British Standards Institution (BSI), Energy Spectrometer for Scanning Electron Microscopy

18/30319114 DC BS ISO 20171. Microbeam analysis. Scanning electron microscopy. Tagged image file format for Scanning electron microscopy(TIFF/SEM)
BS ISO 21466:2019 Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CDSEM
21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS ISO 16700:2016 Tracked Changes. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
18/30344520 DC BS ISO 21466. Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CD-SEM
BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
BS CECC 00013:1985 Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS EN ISO 17751-2:2023 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Scanning electron microscopy method
BS EN ISO 17751-2:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Scanning Electron Microscopy method
12/30228339 DC BS ISO 16000-27. Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)

Professional Standard - Public Safety Standards, Energy Spectrometer for Scanning Electron Microscopy

GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
GA/T 1937-2021 Forensic Science Rubber Inspection Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1939-2021 Forensic Science Current Spot Examination Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
GA/T 1521-2018 Forensic Science Plastics Elemental Composition Examination Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1519-2018 Forensic Science Toner Elemental Composition Inspection Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1520-2018 Forensic science black powder, pyrotechnic powder element composition inspection scanning electron microscope/X-ray energy spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Energy Spectrometer for Scanning Electron Microscopy

GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
GB/T 2679.11-2008 Paper and board.Qualitative analysis of mineral filler and mineral coating.SEM/EDAX Method
GB/T 2679.11-1993 Paper and board. Qualitative analysis of mineral filler and mineral coating. SEM/EDAX method

Japanese Industrial Standards Committee (JISC), Energy Spectrometer for Scanning Electron Microscopy

JIS K 3850-1:2006 Determination of airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS R 1633:1998 Sample preparation method of fine ceramics and fine ceramic powders for scanning electron microscope observation

Association Francaise de Normalisation, Energy Spectrometer for Scanning Electron Microscopy

XP X21-015*XP ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
XP ISO/TS 24597:2011 Analyse par microfaisceaux - Microscopie électronique à balayage - Méthodes d'évaluation de la netteté d'image
NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF ISO 16000-27:2014 Air intérieur - Partie 27 : détermination de la poussière fibreuse déposée sur les surfaces par MEB (microscopie électronique à balayage) (méthode directe)
NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
NF G07-142-2*NF EN ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other speciality animal fibres and their blends - Part 2 : scanning electron microscopy method

SE-SIS, Energy Spectrometer for Scanning Electron Microscopy

SIS SS CECC 00013-1985 Basic specification: Scanning electron microscope inspection of semiconductor dice

RU-GOST R, Energy Spectrometer for Scanning Electron Microscopy

GOST R 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes
GOST ISO 16000-27-2017 Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)

Danish Standards Foundation, Energy Spectrometer for Scanning Electron Microscopy

DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

German Institute for Standardization, Energy Spectrometer for Scanning Electron Microscopy

DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
DIN ISO 16000-27:2014-11 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)
DIN EN ISO 17751-2:2016-11 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016); German version EN ISO 17751-2:2016 / Note: To be replaced by DIN EN ISO 17751-2 (2022-09).
DIN EN ISO 17751-2:2022-09 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 2: Scanning electron microscopy method (ISO/DIS 17751-2:2022); German and English version prEN ISO 17751-2:2022 / Note: Date of issue 2022-08-19*I...
DIN ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)

ES-UNE, Energy Spectrometer for Scanning Electron Microscopy

UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
UNE-EN ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016)

AENOR, Energy Spectrometer for Scanning Electron Microscopy

UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).

Lithuanian Standards Office , Energy Spectrometer for Scanning Electron Microscopy

LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)

Guangdong Provincial Standard of the People's Republic of China, Energy Spectrometer for Scanning Electron Microscopy

DB44/T 1216-2013 Characterization of graphene using scanning electron microscopy and X-ray spectroscopy
DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy

GOSTR, Energy Spectrometer for Scanning Electron Microscopy

PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry

AT-ON, Energy Spectrometer for Scanning Electron Microscopy

OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

European Committee for Standardization (CEN), Energy Spectrometer for Scanning Electron Microscopy

prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

BE-NBN, Energy Spectrometer for Scanning Electron Microscopy

NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)

Association of German Mechanical Engineers, Energy Spectrometer for Scanning Electron Microscopy

VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method

国家市场监督管理总局、中国国家标准化管理委员会, Energy Spectrometer for Scanning Electron Microscopy

GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air

未注明发布机构, Energy Spectrometer for Scanning Electron Microscopy

BS CECC 13:1985(1999) Harmonized system of quality assessment for electronic components : Basic specification : Scanning electron microscope inspection of semiconductor dice

American National Standards Institute （ANSI), Energy Spectrometer for Scanning Electron Microscopy

ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

Professional Standard - Commodity Inspection, Energy Spectrometer for Scanning Electron Microscopy

SN/T 2649.1-2010 Determination of asbestos in cosmetics for import and export.Part 1:X-ray diffraction and scan electron microscopy method

BELST, Energy Spectrometer for Scanning Electron Microscopy

STB 2210-2011 Nano-sized carbon and non-carbon materials and composites based on them. Method for determining parameters using scan electron microscopy measurements
STB 2209-2011 Nano-sized carbon and non-carbon materials and composites based on them. The technique for determining elemental composition using scan electron microscopy measurements

KR-KS, Energy Spectrometer for Scanning Electron Microscopy

KS K ISO 17751-2-2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning electron microscopy method