ZH
RU
ES

Subsystem

Subsystem, Total:74 items.

In the international standard classification, Subsystem involves: Kitchen equipment, On-board equipment and instruments, Passenger and cabin equipment, Coals, Plastics, Open systems interconnection (OSI), IT terminal and other peripheral equipment, Water quality, Wastes, Protection against fire, Television and radio broadcasting, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Space systems and operations, Analytical chemistry, Fibre optic communications.

Standard Association of Australia （SAA）, Subsystem

AS 1408:1997 Sizing scheme for cooking utensils
AS 2096:1987 Classification and coding systems for Australian coals
AS 2096:1987(R2013)
MP 59-2000 Naming and addressing in the Australian OSI environment
AS/NZS 4414:1996 Ghost-cancelling reference signal for Australian and New Zealand PAL television broadcasting systems

Society of Automotive Engineers (SAE), Subsystem

SAE ARP85E-1991 Air Conditioning Systems For Subsonic Airplanes
SAE ARP85E-2007 Air Conditioning Systems For Subsonic Airplanes
SAE ARP85F-2018 Air Conditioning Systems for Subsonic Airplanes
SAE ARP85G-2019 Air Conditioning Systems for Subsonic Airplanes
SAE ARP85F-2012 Air Conditioning Systems for Subsonic Airplanes
SAE ARP921A-1996 Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft
SAE ARP921-2011 FLIGHT TEST PROCEDURES FOR STATIC PRESSURE SYSTEMS INSTALLED IN SUBSONIC TRANSPORT AIRCRAFT
SAE ARP921B-2020 Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft

ESDU - Engineering Sciences Data Unit, Subsystem

ESDU 89034 A-1993 The maximum lift coefficient of plain wings at subsonic speeds.
ESDU 88029 B-1992 Yawing moment coefficient for plain ailerons at subsonic speeds
ESDU 88029 C-2006 Yawing moment coefficient for plain ailerons at subsonic speeds.
ESDU 89009-1989 Hinge moment coefficient derivatives for trailing-edge controls on wings at subsonic speeds.
ESDU 88040 A-1999 PROGRAM FOR CALCULATION OF AILERON ROLLING MOMENT AND YAWING MOMENT COEFFICIENTS AT SUBSONIC SPEEDS
ESDU 93015 A-1994 Program for calculation of maximum lift coefficient of plain aerofoils and wings at subsonic speeds.
ESDU 93015 B-2009 Program for calculation of maximum lift coefficient of plain aerofoils and wings at subsonic speeds
ESDU 88040-1992 PROGRAM FOR CALCULATION OF AILERON ROLLING MOMENT AND YAWING MOMENT COEFFICIENTS AT SUBSONIC SPEEDS
ESDU 96027 A-1997 Estimation of the unsteady lift coefficient of subsonic propeller blades in non-axial inflow.
ESDU 96027 A-2012 Estimation of the unsteady lift coefficient of subsonic propeller blades in non-axial inflow
ESDU 96027 A-2011 Estimation of the unsteady lift coefficient of subsonic propeller blades in non-axial inflow
ESDU 88040 B-2006 Program for the calculation of aileron rolling moment and yawing moment coefficients at subsonic speeds.
ESDU 81034 B-1999 Linearised two-dimensional oscillatory airforce coefficients and load distributions on thin aerofoils in subsonic flow.
ESDU 81034 A-1982 LINEARISED TWO-DIMENSIONAL OSCILLATORY AIRFORCE COEFFICIENTS AND LOAD DISTRIBUTION ON THIN AEROFOILS IN SUBSONIC FLOW

US-FCR, Subsystem

FCR FED MCD-16-1975 LAND APPLICATION OF WASTEWATER IN AUSTRALIA THE WERRIBEE FARM SYSTEM, MELBOURNE, VICTORIA

American Society for Testing and Materials (ASTM), Subsystem

ASTM D5205-96 Standard Classification System for Polyetherimide (PEI) Materials
ASTM D5205-96(2003) Standard Classification System for Polyetherimide (PEI) Materials
ASTM D5205-10 Standard Classification System for Polyetherimide (PEI) Materials
ASTM D5205-16 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
ASTM D5204-06 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5204-03 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5204-99 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5204-01 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5921-96(2003)e1 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
ASTM D5204-19 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5204-13 Standard Classification System for Polyamide-Imide lpar;PAIrpar; Molding and Extrusion Materials
ASTM D5204-11 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5921-96(2010) Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
ASTM D1883-07 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D5204-17 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials

HU-MSZT, Subsystem

CU-NC, Subsystem

NC 38-01-01-1986 Food Sanitary Standards System Equipments and Utensils in Contact with Food. Sanitary General Requirements

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Subsystem

ASHRAE AT-96-7-4-1996 Proposed Combination Radiant/Convective System for an Arizona Residence
ASHRAE OR-16-C043-2016 Deep Boreholes for Ground Source Heat Pump Systems – Scandinavian Experience and Future Prospects

未注明发布机构, Subsystem

BS ISO 15555:1998(2000) Practice for use of a ceric - cerous sulfate dosimetry system

TZ-TBS, Subsystem

TZS 199-1984 Tanzania Standard Leather — Determination of pH value and difference figure of an agueous extract
TZS 65-1980 Tanzania Standard Paper — Untrimmed stock sizes for the A series — Primary range— Specifications

RO-ASRO, Subsystem

STAS SR 13392-1998 Information technology - Romanian keyboard layout for text and oftice systems

International Telecommunication Union (ITU), Subsystem

ITU-T D.500 R FRENCH-1998 Accounting Rates Applicable to Telephone Relations between Countries in Asia and Oceania
ITU-T D.501 R FRENCH-1993 Accounting Rates Applicable to Telex Relations between Countries in Asia and Oceania
ITU-T D.500 R-1998 Accounting Rates Applicable to Telephone Relations between Countries in Asia and Oceania - Series D: General Tariff Principles Recommendations for Regional Application - Recommendations Applicable in Asia and Oceania Study Group 3; 18 pp

American National Standards Institute （ANSI), Subsystem

ANSI/NFPA 82-2013 Standard on Incinerators and Waste and Linen Handling Systems and Equipment

GB-REG, Subsystem

REG NASA-CR-121016-1972 Propulsion system studies for an advanced high subsonic, long range jet commercial transport aircraft

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Subsystem

ASHRAE OR-10-042-2010 Feasibility Study of Hybrid Wheel Desiccant Dehumidification Cooling Systems in Malaysia

Professional Standard - Aerospace, Subsystem

QJ 913.3-1985 Composite solid propellant (polyether system) - Analysis method for copper chromite content

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Subsystem

ITU-T D.500R-1997 Accounting Rates Applicable to Telephone Relations between Countries in Asia and Oceania - Series D: General Tariff Principles Recommendations for Regional Application - Recommendations Applicable in Asia and Oceania (16 pp; Study Group 3)

National Aeronautics and Space Administration (NASA), Subsystem

NASA-TN-D-5805-1970 Buffet and static aerodynamic characteristics of a systematic series of wings determined from a subsonic wind-tunnel study

US-CFR-file, Subsystem

CFR 22-120.35-2013 Foreign Relations. Part120:Purpose and definitions. Section120.35:Australia Implementing Arrangement.

IT-UNI, Subsystem

Korean Agency for Technology and Standards (KATS), Subsystem

KS M ISO 4897-2002(2022) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M ISO 4897-2002(2017) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS C IEC 61280-2-5:2003 Fiber optic communication subsystem basic test procedures-Part 2-5:Test procedures for digital systems-Jitter transfer function measurement
KS C IEC 61280-2-5:2013 Fiber optic communication subsystem basic test procedures－Part 2－5：Test procedures for digital systems－Jitter transfer function measurement

International Organization for Standardization (ISO), Subsystem

ISO 23766:2022 Thermal insulating products for industrial installations — Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
ISO 23129:2021 Space systems - Thermal control coatings for spacecraft - Atomic oxygen protective coatings on polyimide film

British Standards Institution (BSI), Subsystem

BS ISO 23129:2021 Space systems. Thermal control coatings for spacecraft. Atomic oxygen protective coatings on polyimide film

Association Francaise de Normalisation, Subsystem

NF B35-512:1983 Laboratory glassware. Glass hydrometers. Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids).