ZH
RU
ES

The formula of cu

The formula of cu, Total:498 items.

In the international standard classification, The formula of cu involves: Electricity. Magnetism. Electrical and magnetic measurements, Testing of metals, Air quality, Conducting materials, Biology. Botany. Zoology, Fuels, Products of non-ferrous metals, Solar energy engineering, Fertilizers, General methods of tests and analysis for food products, Iron and steel products, Electrical wires and cables, Printed circuits and boards, Lamps and related equipment, Metrology and measurement in general, Linear and angular measurements, Measurement of fluid flow, Microprocessor systems, Thermodynamics and temperature measurements, Electronic tubes, Aerospace fluid systems and components, Industrial automation systems, Burners. Boilers, Tea. Coffee. Cocoa, SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT. ADMINISTRATION. TRANSPORT, Products of the textile industry, Clothes, Installations in buildings, Quality, Fibre optic communications, Radiation measurements, Electrical accessories, Measurement of volume, mass, density, viscosity, Kitchen equipment, Paper and board, Meat, meat products and other animal produce, Motor cycles and mopeds, Acoustics and acoustic measurements, Special purpose vehicles, Internal combustion engines, Rotary-reciprocating mechanisms and their parts, Vacuum technology, Vibrations, shock and vibration measurements, Aircraft and space vehicles in general, Medical equipment, Applications of information technology, Semiconducting materials, Petroleum, petroleum products and natural gas handling equipment, Audio, video and audiovisual engineering, Edible oils and fats. Oilseeds, Vocabularies, Integrated circuits. Microelectronics, Noise with respect to human beings, Hand-held tools, Shipbuilding and marine structures in general, Electrical and electronic testing, Earth-moving machinery, Continuous handling equipment, Pumps, Compressors and pneumatic machines, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Nuclear energy engineering, Data storage devices, Test conditions and procedures in general, Paints and varnishes, Construction of waterways and ports, Aerospace engines and propulsion systems, Civil engineering in general, Astronomy. Geodesy. Geography, Laundry appliances, Raw materials for rubber and plastics, Services, Rubber, FOOD TECHNOLOGY, Lifting equipment, Protection against fire, Equipment for petroleum and natural gas industries, Ergonomics, Gas and steam turbines. Steam engines, Domestic, commercial and industrial heating appliances, Education, Character sets and information coding, Soil quality. Pedology, Barrels. Drums. Canisters, Geology. Meteorology. Hydrology, Vibration and shock with respect to human beings.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The formula of cu

GB/T 21227-2007 AC loss measurements.Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
GB/T 1483.3-2002 Gauge for pin lampholders
GB/T 6997-2001 Gauges of pin lamp caps
GB/T 1483.2-2002 Gauges of edison screw lampholders
GB/T 1484-1979 Gauges for bayonet lamp caps
GB/T 1483-2001 Gauges of edison screw lamp caps
GB/T 6998-2002 Gauges of prefocus caps
GB/T 20727-2006 Measurement of fluid flow in closed conduits Thermal mass flowmeters
GB/T 21937-2008 Earth-moving machinery.Crawler and wheel tractor dozer blades.Volumetric ratings
GB/T 1483.5-2003 Gauges for lamp caps and holders Part 5: Gauges for bayonet caps
GB/T 1483.6-2003 Gauges for lamp caps and holders Part 6: Bayonet lampholders
GB/T 18273-2000 Petroleum and liquid petroleum products--Direct static measurements--Contents of vertical storage tanks--Mass measurement by hydrostatic tank gauging
GB/T 1483.1-2008 Gauges for lamp caps and holders.Part 1:Gauges for screw caps and holders
GB/T 1483.2-2008 Gauges for caps and lampholders.Part 2:Gauges for pin caps and lampholders
GB/T 1483.5-2008 Gauges for caps and lampholders.Part 5:Gauges for bayonet caps and lampholders
GB/T 1242-2000 Dimensions for panel mounted indicating and recording electrical measuring instruments

AENOR, The formula of cu

UNE-EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
UNE-EN 15411:2012 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
UNE-EN 61215-1-4:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
UNE 59511-1:2007 Footwear. Materials for uppers, lining and insocks. Determination of heavy metals content extractable by acid perspiration solution in textile materials for footwear. Part 1: Determination of Cd, Ni, Cr, Co, Pb, Sb and Cu.
UNE 58155:2002 Mobile cranes. Presentation of rated capacity charts.
UNE-EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error. (ISO 8655-6:2002)
UNE-ISO 15903:2009 Soil quality -- Format for recording soil and site information

European Committee for Standardization (CEN), The formula of cu

prEN 14385 rev Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, TI and V
EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
FprCEN/TS 17701-2-2021 Plant biostimulants - Determination of specific elements - Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn
EN 12506:2003 Characterization of waste Analysis of eluates Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr VI, Cu, Mo, Ni, No2 -, Pb, total S, So4 2-, V and Zn Supersedes ENV 12506:2000
EN 15925:2011 Fertilizers - Extraction of total sulfur present in various forms
EN 15181:2017 Measuring method of the energy consumption of gas fired ovens
EN ISO 10360-4:2000 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 4: CMMs Used in Scanning Measuring Mode ISO 10360-4:2000
EN ISO 659:2009 Oilseeds - Determination of oil content (Reference method) (ISO 659:2009)
EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
prEN 60456-1992 Methods of measuring the performance of horizontal drum type electric washing machines and spin extractors
CEN/TR 17993:2023 Calibration and accuracy of non-catching precipitation measurement instruments

Danish Standards Foundation, The formula of cu

DS/EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
DS/EN 15297:2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
DS/EN 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
DS/EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
DS/EN IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)₂ based photovoltaic (PV) modules
DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
DS/EN 62623:2013 Desktop and notebook computers - Measurement of energy consumption
DS/IEC 473:1981 Dimensions for panel-mounted indicating and recording electrical measuring instruments with Amendment No.1(1979)
DS/EN ISO 8655-6/AC:2009 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
DS/EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
DS/ISO 22955:2021 Acoustics – Acoustic quality of open office spaces
DS/IEC 414:1981 Safety requirements for indicating and recording electrical measuring instruments and their accessories
DS/ENV 50208-6:1998 Data Interchange format for Simulated and Measured Data (ISMD)
DS/ISO 24473:2008 Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
DS/EN 61176:1994 Hand-held electric mains voltage operated circular saws - Methods for measuring the performance
DS/ISO 15903:2002 Soil quality - Format for recording soil and site information

Lithuanian Standards Office , The formula of cu

LST EN 14385-2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
LST EN 15297-2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
LST EN 15411-2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
LST EN 61788-6-2011 Superconductivity -- Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2011)
LST EN 61788-13-2004 Superconductivity. Part 13: AC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites (IEC 61788-13:2003)
LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
LST EN IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules (IEC 61215-1-4:2021)
LST EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002)
LST EN 50193-2001 Closed electrical instantaneous water heaters. Methods for measuring performance

Korean Agency for Technology and Standards (KATS), The formula of cu

KS C IEC 61788-6:2002 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
KS C IEC 61788-6:2017 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
KS C IEC 61788-1:2009 Superconductivity－Part 1：Critical current measurement－DC critical current of Cu/Nb-Ti composite superconductors
KS C IEC 61788-6-2017(2022) Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
KS C IEC 61788-1-2009(2020) Superconductivity－Part 1：Critical current measurement－DC critical current of Cu/Nb-Ti composite superconductors
KS C IEC 61788-26:2022 Superconductivity — Part 26: Critical current measurement —DC critical current of RE-Ba-Cu-O composite superconductors
KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS B ISO 14511:2004 Measurement of fluid flow in closed conduits-Thermal mass flowmeters
KS B ISO 14511:2014 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
KS B 0435-2016(2021) Machining allowance for open die forgings
KS B 6204-2002(2022) Rated capacity of stationary water－tube boilers
KS B ISO 10360-4:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 4:CMMs used in scanning measuring mode
KS B ISO 10360-4:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode
KS M 9422-1998 AIR QUALITY - PRESENTATIOM OF AMBIENT AIR QUALITY DATA IN ALPHANUMERICAL FORM
KS I ISO 7216:2016 Agricultural and forestry wheeled tractors and self-propelled machines－Measurement of noise emitted when in motion
KS B ISO 8655-6:2006 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS B 6007-2014(2019) Temperature measurements of performance forreciprocating internal combustion engines
KS B ISO 1607-1-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
KS B ISO 2954:2014 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
KS C IEC 62053-31-2003(2018)
KS A 4041-1997 DIRECT READING PERSONAL DOSEMETERS FOR X AND GAMMA RADIATION
KS A 4041-1982 DIRECT READING PERSONAL DOSEMETERS FOR X AND GAMMA RADIATION
KS B ISO 8655-6-2017(2022) Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS X ISO/IEC 16969-2013(2019) Information technology－Data interchange on 120 mm optical disk cartridges using +RW format－Capacity：3.0 Gbytes and 6.0 Gbytes
KS B ISO 1607-2-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS B ISO 6485:2015 Earth-moving machinery — Tractor-scraper — Volumetric rating
KS B ISO 6485:2005 Earth-moving machinery-Tractor-scraper-Volumetric rating
KS X ISO/IEC 15485-2013(2019) Information technology－Data interchange on 120 mm optical disk cartridges using phase change PD format－Capacity：650 Mbytes per cartridge
KS I 25640-2012 Determination of emission of formaldehyde from wood product－Large chamber method
KS B ISO 8655-6:2017 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS M ISO 11223:2014 Petroleum and liquid petroleum products — Direct static measurements — Measurement of content of vertical storage tanks by hydrostatic tank gauging
KS X ISO/IEC 15485:2013 Information technology-Data interchange on 120 mm optical disk cartridges using phase change PD format-Capacity:650 Mbytes per cartridge
KS B 9703-2008 Measurement of turning dimensions of wheeled construction machinery
KS X ISO/IEC TR 13841:2001 Information technology-Guidance on measurement techniques for 90 mm optical disk cartidges
KS K 0940-2008 Test method for discharge capacity of plastic drain board
KS X ISO/IEC TR 13841-2001(2021) Information technology — Guidance on measurement techniques for 90 mm optical disk cartridges
KS I ISO 15903-2009(2019) Soil quality－Format for recording soil and site information

British Standards Institution (BSI), The formula of cu

BS EN 61788-6:2008 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 61788-6:2001 Superconductivity - Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN 14385:2004(2008) Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN 61788-6:2011 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN IEC 61788-26:2020 Superconductivity - Critical current measurement. DC critical current of RE-Ba-Cu-O composite superconductors
BS EN 61788-13:2003 Superconductivity - AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
DD CEN/TS 15411:2006 Solid recovered fuels — Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
BS EN IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
BS EN 15411:2011 Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
BS EN 61788-8:2003 Superconductivity - AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
18/30363361 DC BS EN 61788-26. Superconductivity. Part 26. Critical current measurement. DC critical current of RE-Ba-Cu-O composite superconductors
BS EN 61215-1-4:2017 Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
BS EN IEC 61215-1-4:2021+A1:2022 Terrestrial photovoltaic (PV) modules. Design qualification and type approval - Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
BS ISO 19272:2015 Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method)
BS 4584-5:1972 Specification for metal-clad base materials for printed circuits - Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality: PF-CP-Cu-5
BS 4584-6:1972 Specification for metal-clad base materials for printed circuits - Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality, flame retardant grade: PF-CP-Cu-6
18/30366483 DC BS EN 61215-1-4. Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Part 1-4. Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
BS ISO 14511:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
21/30436292 DC BS EN 61215-1-4 AMD1. Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Part 1-4. Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
BS 6986-3:1990+A1:2012 Instant tea in solid form. Determination of moisture content (loss in mass at 103°)
PD IEC TS 61941:2000 Optical fibres. Polarization mode dispersion measurement techniques for single-mode optical fibres
20/30354937 DC BS ISO 3455. Hydrometry. Calibration of current-meters in straight open tanks
BS EN 1060-3:1997 Non-invasive sphygmomanometers - Supplementary requirements for electro-mechanical blood pressure measuring systems
BS EN 1060-3:1997+A2:2009 Non-invasive sphygmomanometers - Supplementary requirements for electro-mechanical blood pressure measuring systems
DD ENV 50208-6-1998 Data interchange format for Simulated and Measured Data (ISMD)
BS ISO 22955:2021 Acoustics. Acoustic quality of open office spaces
BS EN ISO 8655-8:2022 Piston-operated volumetric apparatus - Photometric reference measurement procedure for the determination of volume
BS ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS ISO 1434:1995 Natural rubber in bales - Amount of bale coating - Determination
BS DD ENV 50208-6:1998 Data interchange format for simulated and measured data (ISMD)
BS ISO 1434:1996 Natural rubber in bales. Amount of bale coating. Determination
BS ISO 1434:2016 Natural rubber in bales. Amount of bale coating. Determination
BS EN 61121:2013+A11:2019 Tumble dryers for household use. Methods for measuring the performance
IEC/PAS 63124:2017 Tumble dryers for commercial use. Methods for measuring the performance
BS EN ISO 81060-1:2012 Non-invasive sphygmomanometers. Requirements and test methods for non-automated measurement type
BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
BS ISO 6798:1996 Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method
BS ISO 6798:1995 Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method
BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
BS ISO 8178-3:2019 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
PD IEC 61941:1999 Optical fibres. Polarization mode dispersion measurement techniques for single-mode optical fibres
BS CWA 15533:2006 A model for the classification of quality approaches in eLearning
BS EN ISO 14680-3:2006 Paints and varnishes. determination of pigment content. Filtration method
BS ISO 15903:2002 Soil quality - Format for recording soil and site information
BS 7843-3.2:2005 Guide to the acquisition and management of meteorological precipitation data - Specifcation for raingauges - Tipping bucket gauges

Association Francaise de Normalisation, The formula of cu

NF X43-307*NF EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
NF EN 14385:2004 Émissions de sources fixes - Détermination de l'émission totale de As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI et V
NF EN 61788-6:2012 Supraconductivité - Partie 6 : mesure des propriétés mécaniques - Essai de traction à température ambiante des supraconducteurs composites de Cu/Nb-Ti
NF EN IEC 61788-26:2020 Supraconductivité - Partie 26 : mesurage du courant critique - Courant critique continu des composites supraconducteurs de RE-Ba-Cu-O
XP U45-005-2*XP CEN/TS 17701-2:2022 Plant Biostimulants - Determination of specific elements - Part 2 : determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn
NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
NF C57-105-1-4*NF EN 61215-1-4:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4 : special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
NF C57-105-1-4*NF EN IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4 : special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
NF M08-012*NF ISO 4124:1997 Liquid hydrocarbons. Dynamic measurement. Statistical control of volumetric metering systems.
NF U42-172*NF EN 15925:2011 Fertilizers - Extraction of total sulfur present in various forms
NF S31-210*NF ISO 22955:2021 Acoustics - Acoustic quality of open office spaces
NF ISO 22955:2021 Acoustique - Qualité acoustique des espaces de bureaux ouverts
NF X15-113:1997 Mesure de l'humidité relative de l'air - Hygromètre à variation d'impédance (capacitif et résistif)
NF C73-175:2005 Tumble dryers for household use - Methods for measuring the performance.
NF EN IEC 63103:2020 Appareils d'éclairage - Mesure de puissance en mode non actif
NF B35-655-6*NF EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6 : gravimetric methods for the determination of measurement error
NF B35-655-7*NF EN ISO 8655-7:2006 Piston-operated volumetric apparatus - Part 7 : non-gravimetric methods for the assessment of equipment performance
NF L00-092:2006 Aerospace series - Quality systems - Model for quality assurance applicable to maintenance organizations.
NF EN ISO 8655-7:2022 Appareils volumétriques à piston - Partie 7 : Modes opératoires de mesure alternatifs pour la détermination de volumes
NF C73-221*NF EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purpose
NF ISO 13332:2001 Moteurs alternatifs à combustion interne - Code d'essai pour le mesurage du bruit solidien émis par les moteurs alternatifs à combustion interne à vitesse élevée et à vitesse moyenne, mesuré aux pieds du moteur

German Institute for Standardization, The formula of cu

DIN EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V; German version EN 14385:2004
DIN EN 61788-6:2012 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2011); German version EN 61788-6:2011
DIN EN 15411:2011-11 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn); German version EN 15411:2011
DIN EN 17701-2:2023 Plant biostimulants - Determination of specific elements - Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn; German and English version prEN 17701-2:2023
DIN EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn); German version EN 15411:2011
DIN EN 61788-6:2008 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2008); German version EN 61788-6:2008
DIN 32877:2000 Optoelectronic measurement of distance, profile and form
DIN 50933:2015 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN 21961:2000-06 Mine surveying - Slip-on pivots, slip-on caps for suspension theodolites - Connecting dimensions
DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
DIN 50451-3:2003 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Aluminium (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid by ICP-MS
DIN EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012); German version EN 61788-13:2012
DIN ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged-type electromagnetic flowmeters - Overall length (ISO 13359:1998)
DIN 50933:2015-08 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN 50451-1:2003-04 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 1: Silver (Ag), gold (Au), calcium (Ca), copper (Cu), iron (Fe), potassium (K) and sodium (Na) in nitric acid by AAS
DIN 50986:1979 Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings
DIN 6130:1980-12 Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume
DIN EN ISO 8655-7:2022-11 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022); German version EN ISO 8655-7:2022
DIN V 44570-60531:2008 Household electric thermal storage room heaters - Methods for measuring performance (IEC 59C/107/DC:2002)
DIN EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purposes (IEC 60379:1987, modified); German version EN 60379:2004
DIN ISO 15903:2003 Soil quality - Format for recording soil and site information (ISO 15903:2002)

Group Standards of the People's Republic of China, The formula of cu

T/GDLF 15-2023 Determination of chitosan content in health foods CTS-Cu(Ⅱ)-Zn(Ⅱ)-SDBS resonance Rayleigh scattering method
T/CSA 001-2009 Measurement Method for Integral LED Road Lights

KR-KS, The formula of cu

KS C IEC 61788-6-2017 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
KS C IEC 61788-26-2022 Superconductivity — Part 26: Critical current measurement —DC critical current of RE-Ba-Cu-O composite superconductors
KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS I ISO 7216-2016 Agricultural and forestry wheeled tractors and self-propelled machines－Measurement of noise emitted when in motion
KS B ISO TR 12764-2014 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
KS B ISO 11661-2018(2023) Mobile cranes — Presentation of rated capacity charts
KS B ISO 8655-6-2017 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error

ES-UNE, The formula of cu

UNE-EN 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (Endorsed by AENOR in November of 2011.)
UNE-EN IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-CEN/TS 17701-2:2022 Plant biostimulants - Determination of specific elements - Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
UNE-EN IEC 61215-1-4:2022/A1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
UNE-EN IEC 61215-1-4:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules

European Committee for Electrotechnical Standardization（CENELEC）, The formula of cu

EN 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
EN IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors
EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
EN IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
EN 61215-1-4:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
EN 62623:2013 Desktop and notebook computers - Measurement of energy consumption
HD 215-1974 Safety Requirements for Indicating and Recording Electrical Instruments and Their Accessories

CENELEC - European Committee for Electrotechnical Standardization, The formula of cu

EN 61788-6:2008 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
EN 61788-6:2001 Superconductivity Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
EN 61788-13:2003 Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
EN 61788-8:2003 Superconductivity Part 8: AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
DD ENV 50208-6-1997 Data Interchange Format for Simulated and Measured Data (ISMD)

Japanese Industrial Standards Committee (JISC), The formula of cu

JIS H 7303:2002 Superconductivity -- Part 6: Mechanical properties measurement -- Room temperature tensile test of Cu/Nb-Ti composite superconductors
JIS H 7303:2013 Superconductivity -- Part 6: Mechanical properties measurement -- Room temperature tensile test of Cu/Nb-Ti composite superconductors
JIS H 7310:2006 Superconductivity -- AC loss measurements -- Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
JIS H 7310:2013 Superconductivity -- AC loss measurements -- Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
JIS Z 8765:1980 Method of flow measurement by turbine meters
JIS B 0418:1999 Machining allowance for open die forgings
JIS K 0315:2022 Method for measuring reducing trace gases by semiconductor-type trace gas measuring equipment
JIS Z 9903:1998 Quality systems -- Model for quality assurance in final inspection and test
JIS Z 4333:2006 Portable photon ambient dose equivalent rate meters for use in radiation protection
JIS B 8006:1986 Pressure measurements of performance for reciprocating internal combustion engines
JIS B 8007:1987 Temperature measurements of performance for reciprocating internal combustion engines
JIS C 62623:2014 Desktop and notebook computers -- Measurement of energy consumption
JIS C 9812:1999 Tumble dryers for household use -- Methods for measuring the performance
JIS Z 4333 AMD 1:2001 Portable photon ambient dose equivalent ratemeters for radiation protection (Amendment 1)
JIS Z 9901:1998 Quality systems -- Model for quality assurance in design, development, production, installation and servicing
JIS Z 2280:1993 Test method for Young's modulus of metallic materials at elevated temperature
JIS B 7762-6:2006 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 6: Impact drills

International Electrotechnical Commission (IEC), The formula of cu

IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors
IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
IEC 61788-13:2003 Superconductivity - Part 13: AC loss measurements; Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
IEC 61215-1-4:2021/AMD1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
IEC 61215-1-4:2022 Amendment 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
IEC 61215-1-4:2021+AMD1:2022 CSV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
IEC 61215-1-4:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
IEC 61215-1-4:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
IEC 62623:2022 RLV Desktop and notebook computers - Measurement of energy consumption
IEC 62623:2022 Desktop and notebook computers - Measurement of energy consumption
IEC 60473:1974 Dimensions for panel-mounted indicating and recording electrical measuring instruments
IEC 60414:1973 Safety requirements for indicating and recording electrical measuring instruments and their accessories
IEC 61121:2002 Tumble dryers for household use - Methods for measuring the performance
IEC 61121:1991 Method for measuring the performance ot tumbler dryers for household use
IEC 60473/AMD1:1979 Dimensions for panel-mounted indicating and recording electrical measuring instruments
IEC 63047:2018 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement

CEN - European Committee for Standardization, The formula of cu

PD CEN/TS 15411:2006 Solid recovered fuels - Methods for the determination of the content of trace elements (As@ Ba@ Be@ Cd@ Co@ Cr@ Cu@ Hg@ Mo@ Mn@ Ni@ Pb@ Sb@ Se@ Tl@ V and Zn)
EN 15181:2008 Measuring method of the energy consumption of gas fired ovens

Indonesia Standards, The formula of cu

SNI 7854-2013 Metode pengujian kadar logam tembaga (Cu), seng (Zn), besi (Fe) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)
SNI 03-6455.5-2000 Methods measurement of discharge in open channels by rectangular weirs
SNI 03-6455.3-2000 Methods for measurement of discharge in open channels by quadrangular broad weir measuring structures
SNI 3410-2008
SNI 2821-2011 Tata cara perhitungan evapotranspirasi potensial dengan panci penguapan tipe“A”
SNI ISO 81060-1:2009 Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non automated measurement type

Association of German Mechanical Engineers, The formula of cu

VDI 2267 Blatt 12-2008 Determination of suspended matter in ambient air - Measurement of As, Ca, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb and Zn by energy dispersive X-ray fluorescense (ED XRF)
VDI 2267 Blatt 16-2007 Determination of suspended matter in ambient air - Measurement of the mass concentration of As, Cd, Co, Cr, Cu, Ni, Pb, Sb, V und Zn as part of dust precipitation by atomic absorption spectrometry (AAS)
VDI/VDE/DGQ/DKD 2622 Blatt 23.1-2017 Calibration of measuring equipment for electrical quantities - Clamp-on probes (DC and NF-AC)
VDI 2267 Blatt 15-2005 Determination of suspended matter in ambient air - Measurement of the mass concentration of Al, As, Ca, Cd, Co, Cr, Cu, K, Mn, Ni, Pb, Sb, V, Zn as part of dust precipitation by mass spectrometry (ICP-MS)
VDI 3839 Blatt 8-2004 Instructions on measuring and interpreting the vibrations of machines - Typical vibration patterns with reciprocating machines
VDI/VDE 2623-2012 Format for data exchange in management of measuring and test equipment - Definition of Calibration Data Exchange-Format (CDE-Format)
VDI 4443-2008 Contactless energy transfer for mobile systems of piece goods conveying
VDI/VDE/DGQ 2618 Blatt 13.2-2005 Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact

PL-PKN, The formula of cu

PN-EN IEC 61788-26-2021-03 E Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors (IEC 61788-26:2020)
PN M43110-1966 Displacement compressors iameters of cylinders
PN P50145-1969 Paper industry products Determination of taleable mas* in lot* o? pulp baled led in shee? form
PN S47406-1993 Road vehicles. Measurement of opacity of exhaust gas from compression-ignition (diesel) engines. Lug-down test

International Organization for Standardization (ISO), The formula of cu

ISO 19272:2015 Low alloyed steel - Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
ISO 14511:2001 Measurement of fluid flow in closed conduits - Thermal mass flowmeters
ISO 14511:2019 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
ISO/CD 3884:2023 Solid recovered fuels — Methods for the determination of the content of elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ti, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Sn, Tl, V, Zn)
ISO 4786:1977 Enclosed-scale adjustable-range thermometers
ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
ISO 11605:1995 Paper and board - Calibration of variable-area flowmeters
ISO 22955:2021 Acoustics - Acoustic quality of open office spaces
ISO 2954:1975 Mechanical vibration of rotating and reciprocating machinery; Requirements for instruments for measuring vibration severity
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
ISO 1607-2:1978 Positive displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure
ISO 12764:2017 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
ISO 6485:1980 Earth-moving machinery; Tractor-scraper volumetric rating
ISO 11661:2022 Mobile cranes — Presentation of rated capacity charts
ISO 8655-7:2005 Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance
ISO/IEC 15498:1997 Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 Mbytes per cartridge
ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
ISO/IEC 13841:1995 Information technology - Guidance on measurement techniques for 90 mm optical disk cartridges
ISO/IEC 23090-6:2021 Information technology -- Coded representation of immersive media-- Part 6:Immersive media metrics
ISO 8655-6:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error; Technical Corrigendum 1

AT-ON, The formula of cu

ONR CEN/TS 17701-2-2021 Plant biostimulants - Determination of specific elements - Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn (FprCEN/TS 17701-2:2021)
ONORM EN 29002-1990 Quality systems; model for quality assurance in production and istallation
ONORM EN 29003-1990 Quality Systems; modelfor quality assurance in final inspection and test
ONORM B 2402-1987 Measurement of liquid flow in open Channels; critical depthflumes
ONORM EN 29001-1990 Quality Systems; modelfor quality assurance in designldevelopment, production, Installation and servicing
ONORM ISO 6485:1983 Earth-moving machinery; Volumetrie rating of tractor-scrapers

Professional Standard - Light Industry, The formula of cu

QB/T 2220-1996 Gauge of cylindrical lamp caps
QB/T 3591-1999 Inspection gauge for screw lamp holders
QB 1550-1992 Gauge for pin-type lampholders
QB/T 3589-1999 Inspection gauge for bayonet lamp holders

Standard Association of Australia （SAA）, The formula of cu

AS 1098:1972 Roller-type screw calliper gauges
AS B129:1968 Designs for geometric limit gauges (plain and screwed in inch units)
AS 3778.6.1:1992 Measurement of water flow in open channels - Measuring devices, instruments and equipment - Rotating element current-meters
AS/NZS 61215.1.4:2023 Terrestrial photovoltaic (PV) modules — Design qualification and type approval, Part 1.4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules (IEC 61215-1-4:2021, (ED.2.1) MOD)
AS EN 1060.3:2004 Non-invasive sphygmomanometers - Supplementary requirements for electromechanical blood pressure measuring systems
AS 4637:2006 Measurement of pump displacement and free air delivery of a reciprocating air compressor package
AS 3778.6.3:1992 Measurement of water flow in open channels - Measuring devices, instruments and equipment - Calibration of rotating element current-meters in straight open tanks

(U.S.) Telecommunications Industries Association , The formula of cu

TIA-455-124-A-2004 FOTP124 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by Interferometry
TIA-455-191-B-2003 FOTP- 191 IEC-60793-1-45 Optical Fibres- Part 1-45: Measurement Methods and Test Procedures- Mode Field Diameter

AR-IRAM, The formula of cu

RU-GOST R, The formula of cu

GOST 5944-1991 Dimensions of panel mounted indicating and recording electrical measuring instruments
GOST 8.464-1982 State system for ensuring the uniformity of measurements. Gas mass flow rate. Calculated relations of indirect methods of measurements
GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators
GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
GOST 14241-1969 Middle flow diaphragm actuating device SSI. Types and basic parameters
GOST 30387-1995 Knitted fabrics and garments. Methods for determination of appearance and mass part of raw material
GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
GOST 1368-2003 Fish. Length and mass
GOST 1368-1991 Fish of all types of processing. Length and mass
GOST 21625-1976 Digital information-measuring mechanism with stream-jet-convertor for measuring linear sizes
GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
GOST R 8.786-2012 State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements
GOST 20281-1974 Micromodules of stacked and spaced construction. Measuring methods of electrical characteristics
GOST 16519-1978 Portable tools. Methods for measurement of parameters of vibration
GOST R 51959.3-2002 Non-invasive sphygmomanometers (measuring devices of arterial pressure). Part 3. Supplementary requirements for electro-mechanical blood pressure measuring systems
GOST 25634-1983 Catalogue of geodetic stations coordinates. Form and content
GOST R 50691-2013 Services to the public. Model of system of ensuring quality of services
GOST R 8.816-2013 State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter

IN-BIS, The formula of cu

IS 4309-1979
IS 6765-1972
IS 11745-1986
IS 6849 Pt.1-1993 Positive displacement vacuum pumps. Measurement of performance characteristics. Part 1: Measurement of volume rate of flow (Pumping speed) (First Revision)
IS 2166-1963

U.S. Air Force, The formula of cu

AIR FORCE MIL-C-83811 NOTICE 1-1996 CRANE, FLOOR, PORTABLE, TRESTLE TYPE 8,000 POUND CAPACITY
AIR FORCE MIL-C-83811-1990 CRANE, FLOOR, PORTABLE, TRESTLE TYPE 8,000 POUND CAPACITY
AIR FORCE MS27650 REV F-1973 METER, TIME TOTALIZING HERMETICALLY SEALED 26VDC 400HZ
AIR FORCE MIL-DTL-25666 F (1)-2000 CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAUGING, GENERAL SPECIFICATION FOR
AIR FORCE MIL-DTL-25666 F NOTICE 1-1996 CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAUGING, GENERAL SPECIFICATION FOR
AIR FORCE MIL-DTL-25666 F-1995 CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAUGING, GENERAL SPECIFICATION FOR
AIR FORCE QPL-25666-4-2004 CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAUGING, GENERAL SPECIFICATION

CZ-CSN, The formula of cu

CSN 25 7830-1964 Flow-meters with glass tube
CSN 25 0008-1977 Metrology errors of primary standards forms of expressing
CSN 27 0330-1966 Bracket cranes with crab of the lifting capacity 5 t
CSN 64 0924-1977 Break-through volume capaci- ty of strong acid cation ex- changere in the Na+ -form

YU-JUS, The formula of cu

JUS N.R6.038-1983 Simbols used in formulas for time dependent guantities
JUS A.K1.013-1987 Quality systems. Model for quality assurance inproduction and installation
JUS A.K1.014-1987 Quality systems. Model for quality assurance in final inspection and test

ISA - International Society of Automation, The formula of cu

ISA RP3.2-1978 FLANGE MOUNTED SHARP EDGED ORIFICE PLATES FOR FLOW MEASUREMENT
ISA 97.00.01-2014 Face-to-face Dimensions of Flanged Vortex Flowmeters

BELST, The formula of cu

STB 2299-2020 Measurement of liquid flow in closed conduits. Weighing method

American Society for Testing and Materials (ASTM), The formula of cu

ASTM E422-22 Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
ASTM E2684-09 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
ASTM E711-87(1996) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM E711-87(2004) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM F1172-88(2010) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM F1718-01(2013) Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

RO-ASRO, The formula of cu

STAS 10726-1976 1,4 CIS BUTADIENE RUBBER WITH HIGH CIS ISOMER CONTENT, POLYMERIZED IN SOLUTION General technical requirements for quality
STAS SR EN ISO 9002:1995 Quality systems - Model for quality assurance in production, installation and servicing
STAS SR ISO 7858-1:1996 Measurement of water flow in closed conduite Meters for cold potable water - Combination meters Part 1: Specifications
STAS 6024-1987 Corrugated board BOXES ROles and methods for quallty checking up
STAS 12879-1990 Piston compressors. Measuring method of noise levels
STAS 5518/2-1982 SPARK PLUGS FOR SPARK IGNITION ENGINES Thermal value
STAS 10059-1975 ELECTRONICMEASURING INSTRUMENTS Determination and mode of expression of errors
STAS 1314/9-1975 MANGANESE ORES AND CONCENTRATES Determination ot moisture content at delivery

CH-SNV, The formula of cu

SN 219 505.3-1978 Gewindeanschlu? W 21,8 x 1/14" linksFülldruck ≤ 200 bar
VSM 18731.1-1965

HU-MSZT, The formula of cu

Professional Standard - Aviation, The formula of cu

HB 6178-1988 Installation and Calibration of Capacitive Fuel Quantity Measuring System

CU-NC, The formula of cu

NC 63-22-1987 Automobile Industry. Lower Roller Reels for Crawler Equipment. General Quality Specifications

Underwriters Laboratories (UL), The formula of cu

UL 448C-2023 UL Standard for Safety Stationary, Rotary-Type, Positive-Displacement Pumps for Fire-Protection Service

FI-SFS, The formula of cu

International Federation of Trucks and Engines, The formula of cu

NAVISTAR MPAPS F-9546-2014 Quality Requirements For Two-Piece Wheel Nuts
NAVISTAR TMS 9546-2007 Quality Requirements for Two-Piece Wheel Nuts (Revision C)

American National Standards Institute （ANSI), The formula of cu

ANSI/ASHRAE 84 Addendum a-2013 Method of Testing Air-to-Air Heat/Energy Exchangers
ANSI/ASHRAE 84-2013 Method of Testing Air-to-Air Heat/Energy Exchangers
ANSI/EIA 520E000-A:2000 Sectional Specification for In-Line Switches of Certified Quality
ANSI/ASTM F1172:1988 Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ANSI/TIA/EIA 78A-1990 Spectral-Attenuation Cutback Measurement for Single-Mode Optical Fibers
ANSI S4.51-1991 Standard method for digital audio equipment - Measurement of digital audio equipment
ANSI/ASTM F1510:2007 Specification for Rotary Positive Displacement Pumps, Commercial Ships Use
ANSI/ASTM F1510:2021 Standard Specification for Rotary Positive Displacement Pumps, Ships Use

Military Standard of the People's Republic of China-General Armament Department, The formula of cu

GJB/Z 9003-1996 Quality System – Quality Assurance Model for Final Inspection and Testing
GJB/Z 9001-1996 Quality system - quality assurance model for design, development, production, installation and service

未注明发布机构, The formula of cu

GJB/Z 9002-1996 Quality System – Quality Assurance Model for Production, Installation and Service
BS 3221-6:1987(2011) Medicine measures — Part 6 : Specification for free - standing plastics medicine measuring spoons of 5 mL capacity
BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
BS EN ISO 8662-4:1995(1999) Hand - held portable power tools — Measurement of vibrations at the handle — Part 4 : Grinding machines
BS EN ISO 8662-7:1997(1999) Hand - held portable power tools — Measurement of vibrations at the handle — Part 7 : Wrenches, screwdrivers and nut runners with impact, impulse orratchet action
BS EN ISO 8662-6:1995(1999) Hand - held portable power tools — Measurement of vibrations at the handle — Part 6 : Impact drills
BS EN ISO 8662-9:1997 Hand - held portable power tools — Measurement of vibrations at the handle — Part 9 : Rammers
BS EN ISO 8662-14:1997(1999) Hand - held portable tools — Measurement of vibrations at the handle — Part 14 : Stone - working tools and needle scalers
BS EN ISO 8662-13:1997(1999) Hand - held portable power tools — Measurement of vibrations at the handle — Part 13 : Die grinders

United States Navy, The formula of cu

NAVY MS16959-1961 SHAFT TYPE FORK MOUNTING FOR TRUCKS OF 6000 POUNDS CAPACITY BASED ON 24" LOAD CENTER
NAVY MS16960-1961 SHAFT TYPE FORK MOUNTING FOR TRUCKS OF 10,000 POUNDS CAPACITY BASED ON 24" LOAD CENTER
NAVY AN5541 REV 2 VALID NOTICE 1-1960 THERMOCOUPLE- ENGINE CYLINDER BAYONET TYPE
NAVY AN5541 REV 2-1947 THERMOCOUPLE- ENGINE CYLINDER BAYONET TYPE
NAVY MS16958-1961 SHAFT TYPE FORK MOUNTING FOR TRUCKS OF 2000 AND 4000 POUND CAPACITY BASED ON 24" LOAD CENTER

IX-ECMA, The formula of cu

ECMA 239-1996 Data Interchange on 90 mm Optical Disk Cartridges - HS-1 Format - Capacity: 650 Megabytes Per Cartridge
ECMA 240-1996 Data Interchange on 120 mm Optical Disk Cartridges Using Phase Change PD Format - Capacity: 650 Mbytes per Cartridge
ECMA 183-1992 Data Interchange on 130 mm Optical Disk Cartridges Capacity: 1 Gigabyte per Cartridge
ECMA 184-1992 Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 1,3 Gigabytes per Cartridge
ECMA 223-1995 Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 385 Megabytes per Cartridge

AT-OVE/ON, The formula of cu

OVE EN IEC 61215-1-4/A1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules (IEC 82/1933/CDV) (Amendment) (english version)

Professional Standard - Agriculture, The formula of cu

GB/T 10300.3-1988 Quality Management and Quality Assurance Quality System Quality Assurance Models for Production and Installation
GB/T 10300.4-1988 Quality Management and Quality Assurance Quality System Final Inspection and Test Quality Assurance Model
GB/T 10300.2-1988 Quality management and quality assurance Quality system development design, production, installation and service quality assurance model

Society of Automotive Engineers (SAE), The formula of cu

SAE J1287-1980 Measurement of Exhaust Sound Levels of Stationary Motorcycles
SAE J2567-2004 Measurement of Exhaust Sound Levels of Stationary Snowmobiles
SAE J1287-1982 MEASUREMENT OF EXHAUST SOUND LEVELS OF STATIONARY MOTORCYCLES
SAE J1287-1993 MEASUREMENT OF EXHAUST SOUND LEVELS OF STATIONARY MOTORCYCLES
SAE J2567-2021 Measurement of Exhaust Sound Levels of Stationary Snowmobiles
SAE J2968/1-2022 Measurement of Material Properties for Wet Friction Materials
SAE J1792/1-2007 Self-Propelled Sweepers—Air Flow Performance—Part 1: Suction Air Volume Performance
SAE J1787-2005 Measurement of the Total Ash Content of Aviation Piston Engine Oils by a Calculation Method
SAE ARP1323-1978 TYPE MEASUREMENTS OF AIRCRAFT INTERIOR SOUND PRESSURE LEVELS IN CRUISE

ANS - American Nuclear Society, The formula of cu

15.2-1990 Quality Control for Plate-Type Uranium-Aluminum Fuel Elements
15.2-1999 Quality Control for Plate-Type Uranium-Aluminum Fuel Elements

SAE - SAE International, The formula of cu

SAE J2567-2015 Measurement of Exhaust Sound Levels of Stationary Snowmobiles

Military Standards (MIL-STD), The formula of cu

DOD MIL-STD-188-199 ADMIN NOTICE 2-2004 VECTOR QUANTIZATION DECOMPRESSION FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD
DOD MIL-STD-188-199 CHG NOTICE 1-1996 VECTOR QUANTIZATION DECOMPRESSION FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

International Telecommunication Union (ITU), The formula of cu

ITU-T SERIES P SUPP 3-1993 MODELS FOR PREDICTING TRANSMISSION QUALITY FROM OBJECTIVE MEASUREMENTS (Study Group XII)
ITU-T G.9905-2013 Centralized metric-based source routing (Study Group 15)

VN-TCVN, The formula of cu

TCVN 6816-2001 Measurement of fluid flow in closed conduits.Methods using transit-time ultrasonic flowmeters
TCVN 6372-1998 Mechamcal vibration of rotating and reciprocating machinery.Requirements for instruments for measuring vibration severity
TCVN 7657-2007 Acoustics.Agricultural and forestry wheeled tractors and self-propelled machines.Measurement of noise emitted when in motion
TCVN 4924-1989 Reciprocating internal combustion engines.Determination of lubricating oil consumption
TCVN 6787-2001 Road vehicles.Automobiles equipped with an internal combustion engine.Measurement of fuel consumption in type approval

American Society of Mechanical Engineers (ASME), The formula of cu

ASME B89.4.1a Addenda-1998 Methods for performance evaluation of coordinate measuring machines
ASME B133.9-1994 Measurement of exhaust emissions from stationary gas turbine engines

ES-AENOR, The formula of cu

Electronic Components, Assemblies and Materials Association, The formula of cu

ECA EIA-520E000-A-2000 Sectional Specification In-Line Switches of Certified Quality

BE-NBN, The formula of cu

NBN-ISO 7216:1992 Acoustics - Agricultural and forestry wheeled tractors and self-propelled machines - Measurement of noise emitted when in motion

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., The formula of cu

IEEE C12.15-1990 Electricity Metering Solid-State Demand Registers for Electromechanical Watthour Meters
IEEE 1159.3-2019 Recommended Practice for Power Quality Data Interchange Format (PQDIF)

ZA-SANS, The formula of cu

SANS 125:2006 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
SANS 1176:1994 Self-supporting plastics containers of nominal capacities 5 l to 220 l

Professional Standard - Energy, The formula of cu

NB/T 20215-2013 Type test of movable micro-fission chamber for pressurized water reactor nuclear power plants in-core neutron flux measurement

TR-TSE, The formula of cu

TS 2779-1977 Mechanical Vibration Of Eotafing ind Reciprocating Machinery Requirements For Instruments For Measuring Vibration Severity

ECIA - Electronic Components Industry Association, The formula of cu

520EAAC-1990 Detail Specification for Dual In-Line Switches of Certified Quality

Alliance of Telecommunications Industry Solutions （ATIS), The formula of cu

ATIS 0300107-2012 Processing Data in ANSI MH10.8.3 Formatted High Capacity AIDC Media

ATIS - Alliance for Telecommunications Industry Solutions, The formula of cu

0300107-2012 Processing Data in ANSI MH10.8.3 Formatted High Capacity AIDC Media

National Aeronautics and Space Administration (NASA), The formula of cu

NASA NACA-TM-910-1939 Measurements on a low-wing model in the rotating jet and comparison with flight measurements
NASA NACA-TN-1187-1947 Formulas for additional mass corrections to the moments of inertia of airplanes

(U.S.) Ford Automotive Standards, The formula of cu

FORD W-GP2-1999 COLLET STYLE PLUG GAUGE RANGE ABOVE 0.25-UP TO-25
FORD W-GS2-1999 RECESS ADJUSTABLE SNAP GAUGE FOR WORKPIECE TOLERANCE 0.5 AND ABOVE RANGE UP TO-286

IL-SII, The formula of cu

S.I.230-1969 SCREWED ELECTRIC FUSES WITH FUSE LINK : QUALITY REQUIREMENTS

国家市场监督管理总局、中国国家标准化管理委员会, The formula of cu

GB/T 37688-2019 Information technology—Measurement of re-flowable document interoperability

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The formula of cu

ASHRAE SA-96-12-3-1996 Effect of Variable Flow on Centrifugal Chiller Performance

Hebei Provincial Standard of the People's Republic of China, The formula of cu

DB13/T 5159-2019 Determination of trans-capsanthin content in capsanthin

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The formula of cu

ASHRAE 4841-2006 The Effect of Elbows on the Accuracy of Liquid Flow Measurement with an Insertion Flowmeter

Taiwan Provincial Standard of the People's Republic of China, The formula of cu

CNS 15041-3-2007 Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring system

Canadian Standards Association (CSA), The formula of cu

CSA CGA P.5-M97-1997 Testing Method for Measuring Per-Cycle Energy Consumption and Energy Factor of Domestic Gas Clothes Dryers Second Edition
CSA CGA P.6-1993-1993 Testing Method for Measuring Thermal and Operating Efficiencies of Gas-Fired Pool Heaters First Edition

Professional Standard - Electron, The formula of cu

SJ 20709-1998 Format and encoding of military vectorial map

API - American Petroleum Institute, The formula of cu

API STD 2551-1965 Standard Method for Measurement and Calibration of Horizontal Tanks (ASTM D1410)

IETF - Internet Engineering Task Force, The formula of cu

RFC 5840-2010 Wrapped Encapsulating Security Payload (ESP) for Traffic Visibility
RFC 8450-2018 RTP Payload Format for VC-2 High Quality (HQ) Profile
RFC 5618-2009 Mixed Security Mode for the Two-Way Active Measurement Protocol (TWAMP)

ECMA - European Association for Standardizing Information and Communication Systems, The formula of cu

ECMA 181-1992 Uncertainty of Measurement as Applied to Type Approval of Products

Institute of Electrical and Electronics Engineers (IEEE), The formula of cu

IEEE P1708/D04, June 2014 IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices