ZH
RU
ES
Evaluation and Expression of Measurement Uncertainty
Evaluation and Expression of Measurement Uncertainty, Total:116 items.
In the international standard classification, Evaluation and Expression of Measurement Uncertainty involves: Vocabularies, Quality, Metrology and measurement in general, Test conditions and procedures in general, Physics. Chemistry, Air quality, Testing of metals, Microbiology, Measurement of fluid flow, Protection of and in buildings, Radiation measurements, Protection against fire, Linear and angular measurements, Gas and steam turbines. Steam engines, Acoustics and acoustic measurements, Electrical engineering in general, Electrical and electronic testing, Vacuum technology, Heat pumps.
National Metrological Technical Specifications of the People's Republic of China, Evaluation and Expression of Measurement Uncertainty
- JJF 1059-1999 Evaluation and Expression of Uncertainty in Measurement
- JJF 1059.1-2012 Evaluation and Expression of Uncertainty in Measurement
- JJF 1059 COR-1999 Evaluation and Expression of Measurement Uncertainty
- JJF 1130-2005 Guide to the Estimation of Uncertainty in Calibration of Geometrical Measuring Equipment
Military Standard of the People's Republic of China-General Armament Department, Evaluation and Expression of Measurement Uncertainty
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Evaluation and Expression of Measurement Uncertainty
- GB/T 27418-2017 Guide to the evaluation and expression of uncertainty in measurement
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Evaluation and Expression of Measurement Uncertainty
- GB/T 27420-2018 Conformity assessment.Application guide for evaluation and expression of uncertainty in biological sample measurement
- GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory
- GB/T 27430-2022 Role of measurement uncertainty in conformity assessment
- GB/Z 22553-2010 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
Korean Agency for Technology and Standards (KATS), Evaluation and Expression of Measurement Uncertainty
International Organization for Standardization (ISO), Evaluation and Expression of Measurement Uncertainty
- ISO/IEC GUIDE 98-1:2009 Uncertainty of measurement —
Part 1:
Introduction to the expression of
uncertainty in measurement
- ISO/IEC Guide 98:1993 Guide to the expression of uncertainty in measurement (GUM)
- ISO/IEC CD Guide 98-1 Guide to the expression of uncertainty in measurement — Part 1: Introduction
- ISO/IEC DGuide 98-1 Guide to the expression of uncertainty in measurement — Part 1: Introduction
- ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- ISO/CD TR 15263 Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
- ISO 19036:2019 Microbiology of the food chain — Estimation of measurement uncertainty for quantitative determinations
- ISO/DTR 15263:2023 Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
- ISO 5168:2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties
- ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
- ISO/TS 19036:2006/Amd 1:2009 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations - Amendment 1: Measurement uncertainty for low counts
- ISO 27893:2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- ISO 12999-1:2020 Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
Danish Standards Foundation, Evaluation and Expression of Measurement Uncertainty
- DS/ENV 13005:2000 Guide to the expression of uncertainty in measurement
- DS/INF 94:1993 Guide to the expression of uncertainty in measurement
- DS/ISO/IEC Guide 98-4:2012 Uncertainty of measurement - Part 4: Role of measurement uncertainty in conformity assessment
- DS/ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- DS/ISO 12999-1:2020 Acoustics – Determination and application of measurement uncertainties in building acoustics – Part 1: Sound insulation
- DS/EN ISO 14956:2003 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- DS/ISO/TS 19036/Amd. 1:2011 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations
- DS/ISO/TS 19036:2006 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations
- DS/ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- DS/IEC Guide 115:2007 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
Lithuanian Standards Office , Evaluation and Expression of Measurement Uncertainty
- LST L ENV 13005-2001 Guide to the expression of uncertainty in measurement
- LST EN ISO 14956:2004 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002)
American National Standards Institute （ANSI), Evaluation and Expression of Measurement Uncertainty
PL-PKN, Evaluation and Expression of Measurement Uncertainty
AENOR, Evaluation and Expression of Measurement Uncertainty
- UNE-ISO/IEC GUIA 98-3:2012 IN Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
- UNE-EN ISO 14956:2003 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty. (ISO 14956:2002)
Standard Association of Australia （SAA）, Evaluation and Expression of Measurement Uncertainty
American Society for Testing and Materials (ASTM), Evaluation and Expression of Measurement Uncertainty
- ASTM D8293-19 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
- ASTM D8293-22 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
- ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
- ASTM E2536-21 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2536-14 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2536-15 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2536-15a Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
- ASTM E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
CN-STDBOOK, Evaluation and Expression of Measurement Uncertainty
- 图书 3-9720 Evaluation and Expression of Measurement Uncertainty Compilation of National Metrology Technical Specifications and Standards (Second Edition)
- 图书 A-4102 Evaluation of Measurement Error and Uncertainty (Second Edition)
RU-GOST R, Evaluation and Expression of Measurement Uncertainty
- GOST 34100.3-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
- GOST 34100.1-2017 Uncertainty of measurement. Part 1. Introduction to guides on the expression of uncertainty in measurement
- GOST R 57900-2017 Buildings and constructions. Determination and application of measurement uncertainties of sound insulation
- GOST 34100.3.2-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 2. Extension to any number of output quantities
- GOST 34100.3.1-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte Carlo method
- GOST R 54500.3.1-2011 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte Carlo method
- GOST R 54502-2011 Microbiology of food and animal feeding stuffs. Guidelines for the estimation of measurement uncertainty for quantitative determinations
Association Francaise de Normalisation, Evaluation and Expression of Measurement Uncertainty
- NF X07-040-3*NF ISO/IEC GUIDE 98-3:2014 Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995)
- NF ISO/IEC GUIDE 98-4:2013 Incertitude de mesure - Partie 4 : rôle de l'incertitude de mesure dans l'évaluation de la conformité
- NF X07-040-4*NF ISO/IEC GUIDE 98-4:2013 Uncertainty of measurement - Part 4: role of measurement uncertainty in conformity assessment
- XP ISO/TS 15530-4:2008 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : technique pour la détermination de l'incertitude de mesure - Partie 4 : évaluation de l'incertitude de mesure spécifique d'une tâche à l'aide de s...
- XP E11-158-4*XP ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- NF ISO 24185:2022 Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé
- CWA 15261-3:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 3 : the evaluation of uncertainties in creep testing
- CWA 15261-2:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 2 : the evaluation of uncertainties in tensile testing
- FD X15-120:2005 Mesure de l'humidité de l'air - Expression des incertitudes - Étude de cas concrets
- CWA 15261-1:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 1 : the evaluation of uncertainties in low-cycle fatigue testing
- NF X10-525*NF ISO 27893:2013 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
Japanese Industrial Standards Committee (JISC), Evaluation and Expression of Measurement Uncertainty
- JIS Z 8404-1:2006 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
- JIS Z 8404-1:2018 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
Professional Standard - Agriculture, Evaluation and Expression of Measurement Uncertainty
- 农业农村部公告第423号-10-2021 Uncertainty evaluation and representation of quantitative testing results for genetically modified plants and their products
British Standards Institution (BSI), Evaluation and Expression of Measurement Uncertainty
- ISO/IEC GUIDE 98-3:2008/Suppl.2:2011 Uncertainty of measurement - Guide to the expression of uncertainty in measurement (GUM:1995). Extension to any number of output quantities
- DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement - Evaluating task-specific measurement uncertainty using simulation
- BS ISO 5168:2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties
- BS ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
- BS DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Evaluating task-specific measurement uncertainty using simulation
- PD ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- BS PD IEC GUIDE 115:2021 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
- PD IEC GUIDE 115:2021 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
- 21/30397434 DC BS ISO 24185. Evaluation of the uncertainty of measurements from a stationary autocorrelated process
- PD IEC/TR 61000-1-6:2012 Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
- PD ISO/TS 22704:2022 Mechanical vibration. Uncertainty of the measurement and evaluation of human exposure to vibration
国家市场监督管理总局、中国国家标准化管理委员会, Evaluation and Expression of Measurement Uncertainty
- GB/T 27419-2018 Guide to the evaluation and expression of uncertainty in measurement—Supplement 1: Propagation of distributions using a Monte Carlo method
- GB/T 24635.4-2020 Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation
IEC - International Electrotechnical Commission, Evaluation and Expression of Measurement Uncertainty
- MISC UNCERT-1995 Guide to the Expression of Uncertainty in Measurement (Edition 1.0; Corrected and Reprinted 1995)
European Committee for Standardization (CEN), Evaluation and Expression of Measurement Uncertainty
- EN ISO 19036:2019 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019)
- EN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
Professional Standard - Aerospace, Evaluation and Expression of Measurement Uncertainty
- QJ 1275-1994 Evaluation of Measurement Uncertainty of Solid Rocket Motor
- QJ 1275-1987 Evaluation of Measurement Uncertainty of Solid Rocket Motor
German Institute for Standardization, Evaluation and Expression of Measurement Uncertainty
- DIN V 19218:2008 Measurement of fluid flow - Procedures for the evaluation of uncertainties (ISO 5168:2005, modified)
- DIN EN ISO 14956:2003 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002
- DIN EN ISO 14956:2003-01 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002
- DIN 1319-3:1996-05 Fundamentals of metrology - Part 3: Evaluation of measurements of a single measurand, measurement uncertainty
Professional Standard - Certification and Accreditation, Evaluation and Expression of Measurement Uncertainty
- RB/T 151-2016 Guidelines for the estimation of measurement uncertainty of food microbiological quantitative detection
KR-KS, Evaluation and Expression of Measurement Uncertainty
- KS Q ISO TR 13587-2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
American Society of Mechanical Engineers (ASME), Evaluation and Expression of Measurement Uncertainty
- ASME PTC 6R-1985 Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines
- ASME B89.7.3.3-2002 Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements
US-CLSI, Evaluation and Expression of Measurement Uncertainty
- CLSI C51-A-2012 Expression of Measurement Uncertainty in Laboratory Medicine; Approved Guideline
International Electrotechnical Commission (IEC), Evaluation and Expression of Measurement Uncertainty
IX-ISO/IEC, Evaluation and Expression of Measurement Uncertainty
- ISO/IEC GUIDE 98-3-SP2:2011 Supplement 2 - Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) - Extension to any number of output quantities
- ISO/IEC GUIDE 98-3-SP1:2008 Supplement 1 - Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) - Propagation of distributions using a Monte Carlo method