ZH
RU
ES

AC electric strength and DC breakdown voltage strength

AC electric strength and DC breakdown voltage strength, Total:40 items.

In the international standard classification, AC electric strength and DC breakdown voltage strength involves: Insulating materials, Electrical engineering in general, Insulation, Protection against electric shock, Insulating fluids, Components for electrical equipment, Electricity. Magnetism. Electrical and magnetic measurements.

RU-GOST R, AC electric strength and DC breakdown voltage strength

GOST 16745-1983 Capacity paper. Method for determining break-down voltage at alternating (frequency 50 Hz.) and direct voltage
GOST 6433.3-1971 Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage
GOST 26130-1984 Electrical insulating paper. Methods for determination of electrical strength at alternating (frequency of 50 Hz) and constant voltage
GOST 1516.1-1976 Electrical equipment for a.c. voltages from 3 to 500 kV. Requirements to electrical strength of insulation
GOST 12.1.038-1982 Occupational safety standards system. Electric safety. Maximum permissible levels of pick-up voltages and currents
GOST 1516.3-1996 Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
GOST R 55195-2012 Eltctrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation
GOST 1516.2-1987 Electrical equipment and installations for a. c. voltages 3 kV and higher. General methods of dielectric tests
GOST R 55192-2012 Electrical equipment and a. c. installations on up to 3 kV voltages and higher. Test methods of the electrical equipment insulation dielectric strength on the installation site

Professional Standard - Electron, AC electric strength and DC breakdown voltage strength

SJ/T 11034-1996 Test method for DC disruptive strength of electronic glass

American Society for Testing and Materials (ASTM), AC electric strength and DC breakdown voltage strength

ASTM D3755-97 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D3755-97(2004) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D3755-14 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D3755-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D2477-07 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07(2012) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02e1 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07 adjunct 2009 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02e2 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-96 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07(2020) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies

CZ-CSN, AC electric strength and DC breakdown voltage strength

CSN 35 1088-1984 Power transformers. Methods for insulation electrical strength tests under alternating voltage
CSN 34 8004-1987 Electrical alternating current appliances for voltage from 3 kV to 750 kV. Insulators. Requirements on electrical strength of the insulation and testing methods

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., AC electric strength and DC breakdown voltage strength

IEEE 339-1972 Requirements for Switching-Impulse Voltage Insulation Strength for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (362 kV and Above)

International Electrotechnical Commission (IEC), AC electric strength and DC breakdown voltage strength

IEC 112/88/DTS:2007 IEC/TS 61251, Ed. 2.0: Electrical insulating materials and systems - A.C. voltage endurance evaluation - Introduction
IEC 60243-2:2001 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

British Standards Institution (BSI), AC electric strength and DC breakdown voltage strength

BS EN 60243-2:2014 Electric strength of insulating materials. Test methods. Additional requirements for tests using direct voltage

American National Standards Institute （ANSI), AC electric strength and DC breakdown voltage strength

ANSI/ASTM D3426:1995 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02)

Institute of Electrical and Electronics Engineers (IEEE), AC electric strength and DC breakdown voltage strength

IEEE Std 339-1972*ANSI C37.074-1972 IEEE Standard Requirements for Switching-Impulse Voltage Insulation Strength for AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis (362 kB and Above)

Canadian Standards Association (CSA), AC electric strength and DC breakdown voltage strength

CSA C863-04-2004 Energy efficiency of high-intensity discharge (HID) and low-pressure sodium (LPS) lamp ballasts

Korean Agency for Technology and Standards (KATS), AC electric strength and DC breakdown voltage strength

KS C IEC 60243-2:2018 Electric strength of insulating materials — Test methods — Part 2: Additional requirements for tests using direct voltage

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, AC electric strength and DC breakdown voltage strength

GB/T 1408.2-2006 Electrical strength of insulating materials.Test methods.Part 2:Additional requirements for tests using direct voltage
GB/T 1408.2-2016 Insulating materials.Test methods for electric strength.Part 2:Additional requirements for tests using direct voltage

KR-KS, AC electric strength and DC breakdown voltage strength

KS C IEC 60243-2-2018 Electric strength of insulating materials — Test methods — Part 2: Additional requirements for tests using direct voltage

CENELEC - European Committee for Electrotechnical Standardization, AC electric strength and DC breakdown voltage strength

EN 60243-2:2001 Electric Strength of Insulating Materials - Test Methods Part 2: Additional Requirements for Tests Using Direct Voltage

European Committee for Electrotechnical Standardization（CENELEC）, AC electric strength and DC breakdown voltage strength

EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

Danish Standards Foundation, AC electric strength and DC breakdown voltage strength

DS/EN 60243-2:2001 Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

ES-UNE, AC electric strength and DC breakdown voltage strength

UNE-EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (Endorsed by AENOR in October of 2014.)

Lithuanian Standards Office , AC electric strength and DC breakdown voltage strength

LST EN 60243-2-2002 Electric strength of insulating materials. Test methods. Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001)