ZH
RU
ES

Leak detector pressure

Leak detector pressure, Total:499 items.

In the international standard classification, Leak detector pressure involves: Non-destructive testing, Fluid storage devices, Pipeline components and pipelines, Electrical equipment for working in special conditions, Nuclear energy engineering, Petroleum, petroleum products and natural gas handling equipment, Vacuum technology, Gas and steam turbines. Steam engines, Internal combustion engines for road vehicles, Coals, Pharmaceutics, MATERIALS HANDLING EQUIPMENT, Internal combustion engines, Fluid power systems, Chipless working equipment, Testing of metals, MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE, Quality, Continuous handling equipment, Iron and steel products, Industrial automation systems, Power stations in general, Extraction and processing of petroleum and natural gas, Fasteners, Measurement of volume, mass, density, viscosity, Mechanical testing, Road vehicle systems, Electrical accessories, Measurement of force, weight and pressure, Energy and heat transfer engineering in general, Transformers. Reactors, Diagnostic, maintenance and test equipment, Tyres, Machine tools, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Rubber and plastics products, Services, Standardization. General rules, Safety of machinery, Welding, brazing and soldering, Earth-moving machinery, Machine tool systems, Terminology (principles and coordination), Vocabularies, Ground service and maintenance equipment, Valves, Electrical wires and cables, Agricultural machines, implements and equipment, Air quality, Environmental protection, Packaging materials and accessories, Construction materials, On-board equipment and instruments, Equipment for the rubber and plastics industries, Paper and board, Plant and equipment for the food industry, Mining and quarrying, Shafts and couplings, Compressors and pneumatic machines, Electrical and electronic testing, Farming and forestry.

European Committee for Standardization (CEN), Leak detector pressure

EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
EN 13184:2003 Non-Destructive Testing - Leak Testing - Pressure Change Method (Incorporates Amendment A1: 2003)
EN 13160-2:2016 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
EN 12645:1998 Pressure Gauges - Apparatus for Inspection of Pressure and/or Inflation of Tyres for Motor Vehicles - Metrology, Requirements and Testing
EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
prEN 692-1992 Mechanical presses; safety
EN ISO 16092-2:2020 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
EN ISO 16092-4:2020 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)
EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
EN 692:1996 Mechanical Presses - Safety

Danish Standards Foundation, Leak detector pressure

DS/EN 13184/A1:2004 Non-destructive testing - Leak testing - Pressure change method
DS/EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
DS/EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
DS/EN 12645:1999 Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing
DS/EN 692+A1:2009 Machine tools - Mechanical presses - Safety
DS/EN 13736+A1:2009 Safety of machine tools - Pneumatic presses

Lithuanian Standards Office , Leak detector pressure

LST EN 13184-2002 Non-destructive testing - Leak testing - Pressure change method
LST EN 13184-2002/A1-2004 Non-destructive testing - Leak testing - Pressure change method
LST EN 13160-2-2004 Leak detection systems - Part 2: Pressure and vacuum systems
LST EN 12645-2001 Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing
LST EN 692-2005+A1-2009 Machine tools - Mechanical presses - Safety
LST EN 13736-2004+A1-2009 Safety of machine tools - Pneumatic presses
LST EN ISO 16092-2:2020 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
LST EN ISO 16092-4:2020 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

AENOR, Leak detector pressure

UNE-EN 13184/A1:2004 Non-destructive testing - Leak testing - Pressure change method
UNE-EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
UNE-EN 13184:2001 NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD.
UNE-EN 13160-2:2017 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
UNE 40479:1985 LAUNDRY MACHINERY. STEAM PRESSES (DRYING/IRONING MACHINES). DEFINITION AND CHECK OF THE CHARACTERISTICS OF A MACHINE
UNE 9104:1986 PRESSURE VESSELS. PERIODICAL INSPECTIONS.
UNE 15506:1997 OPEN FRONT MECHANICAL POWER PRESSES. VOCABULARY.
UNE-EN 692:2006+A1:2009 Machine tools - Mechanical presses - Safety
UNE-EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
UNE-EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing

Association Francaise de Normalisation, Leak detector pressure

NF EN 13184/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Méthode par variation de pression
NF EN 13184:2001 Essais non destructifs - Contrôle d'étanchéité - Méthode par variation de pression
NF A09-494/A1*NF EN 13184/A1:2004 Non-destructive testing - Leak testing - Pressure change method
NF A09-494*NF EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
NF E86-601-2:2003 Leak detection systems - Part 2 : pressure and vacuum systems.
NF EN 13160-5:2017 Systèmes de détection de fuites - Partie 5 : exigences et méthodes d'essai/d'évaluation des systèmes de détection de fuites en citernes et des systèmes de tuyauterie sous pression
NF A09-110:1980 Tightness checks. Recommanded pratices for investigating leaks using pressurized gas.
NF A09-106:1979 Testing for leak tightness by means of ammonia. Locating of leaks by overall pressurization.
NF E86-601-2*NF EN 13160-2:2017 Leak detection systems - Part 2 : requirements and test/assessment methods for pressure and vacuum systems
NF EN 13160-2:2017 Systèmes de détection de fuites - Partie 2 : exigences et méthodes d'essai/d'évaluation des systèmes sous pression et à dépression
NF E63-026-2*NF EN ISO 16092-2:2020 Machine tools safety - Presses - Part 2 : safety requirements for mechanical presses
NF EN ISO 16092-2:2020 Sécurité des machines-outils - Presses - Partie 2 : exigences de sécurité pour les presses mécaniques
NF E63-020:2006 Machine tools - Mechanical presses - Safety.
NF E63-003:1986 Material forming machines. Acceptance conditions of open front mechanical power presses. Accuracy testing.
NF E63-026-4*NF EN ISO 16092-4:2020 Machine tools safety - Presses - Part 4 : safety requirements for pneumatic presses
NF EN ISO 16092-4:2020 Sécurité des machines-outils - Presses - Partie 4 : exigences de sécurité pour les presses pneumatiques
NF E63-012:1980 Form for enquiry, quoting and ordering of drop forging plant. Crank, eccentric and toggle presses.
NF E63-020:2009 Machine tools - Mechanical presses - Safety.
NF E09-040:1997 Safety of machinery. Pressure sensitive protective devices. Part 1 : general principles for the design and testing of pressure sensitive mats and pressure sensitive floors.
NF R63-302*NF EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation/deflation of tyres for motor vehicles - Metrology, requirements and testing
NF E63-001*NF ISO 8540:1994 Open front mechanical power presses. Vocabulary.
NF ISO 2941:2009 Transmissions hydrauliques - Éléments filtrants - Vérification de la pression d'écrasement/éclatement
NF S74-512*NF EN 464:1994 Protective clothing. Protection against liquid and gaseous chemicals, including aerosols liquid and solid particles. Test method : determination of leak-tightness of gas-tight suits (internal pressure test).

British Standards Institution (BSI), Leak detector pressure

BS EN 13160-2:2003 Leak detection systems - Pressure and vacuum systems
BS EN 13184:2001(2007) Non-destructive testing - Leak testing - Pressure change method
BS EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
BS 7388:1991 Guide for prevention of leaks from hydraulic fluid power systems
BS EN 13160-2:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for pressure and vacuum systems
BS EN 13160-5:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
BS EN ISO 16092-2:2020 Machine tools safety. Presses - Safety requirement for mechanical presses
BS EN ISO 16092-4:2020 Machine tools safety. Presses - Safety requirements for pneumatic presses
BS EN 12645:1999 Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing
18/30347889 DC BS EN ISO 16092-2. Machine tools. Safety for presses. Part 2. Mechanical presses
BS EN ISO 16092-3:2018 Machine tools safety. Presses. Safety requirements for hydraulic presses
BS EN 13736:2003 Safety of machine tools - Pneumatic presses
BS EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
BS EN 692:2005 Machine tools - Mechanical presses - Safety
BS EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
BS EN ISO 19085-15:2021 Woodworking machines. Safety - Presses
BS 4184:1994 Glossary for power presses, open front mechanical type
BS 2C 11:1988 Specification for ground pressure test connections for aircraft pressure cabins
BS EN 10246-4:2000 Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
BS EN 13445-5:2009+A3:2011 Unfired pressure vessels. Inspection and testing
BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
BS 6912-9:1992 Safety of earth-moving machinery. Methods for the calculation and verification of the lift capacity of hydraulic excavators
18/30347892 DC BS EN ISO 16092-4. Machine tools. Safety for presses. Part 4. Pneumatic presses
PD IEC TS 62882:2020 Hydraulic machines. Francis turbine pressure fluctuation transposition

German Institute for Standardization, Leak detector pressure

DIN EN 13184:2001-07 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
DIN EN 13184:2001 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
DIN EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003
DIN 25436:1980 Integral leakage rate test of containment with the absolute pressure method
DIN 50104:1983 Testing of hollow bodies by internal pressure; leak detection up to a certain pressure value; general specifications
DIN EN 13160-2:2016-12 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems; German version EN 13160-2:2016
DIN EN 13160-5:2016-12 Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems; German version EN 13160-5:2016
DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
DIN 48083-1:1985 Dies for presses for pressure connections; mechanical presses with a nominal compressive force up to 15 and up to 60 kN connecting; dimensions
DIN 48083-1:1985-04 Dies for presses for pressure connections; mechanical presses with a nominal compressive force up to 15 and up to 60 kN connecting; dimensions
DIN 51351:2007-08 Testing of lubricants - Determination of floc point of refrigerator oils by pressure tube method
DIN EN 13160-2:2016 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems; German version EN 13160-2:2016
DIN 48083-3:1985 Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
DIN 48083-3:1985-04 Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
DIN EN ISO 16092-4:2020-12 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019); German and English version EN ISO 16092-4:2020
DIN EN ISO 16092-2:2021-04 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019); German version EN ISO 16092-2:2020
DIN 52272-1:1982 Testing of mineral fibrous insulating materials; pressure test; evaluation of compressive stress and resistance to compression
DIN 50106:1978 Testing of Metallic Materials; Compression Test
DIN ISO 11:1997 Aircraft - Ground pressure testing connections for pressure cabins (ISO 11:1987)
DIN 8651:1990-05 Machine tools; straight sided power presses; acceptance conditions
DIN 8650:1985-03 Machine tools; open front mechanical power presses; acceptance conditions
DIN 48083-4:1985-04 Dies for presses for pressure connections; dimensions of the hexagon compression type

未注明发布机构, Leak detector pressure

DIN EN 13184 Berichtigung:2004 Non-destructive testing – leak testing – pressure change method; German version EN 13184:2001
BS 470:1984(1999) Specification for Inspection, access and entry openings for pressure vessels

Japanese Industrial Standards Committee (JISC), Leak detector pressure

JIS Z 2332:1993 Test method for leaks using the pressure change measurement
JIS Z 2332:2012 Leak testing method using pressure change
JIS B 8283:1993 Pressure and leak tests for pressure vessels
JIS B 6402:1997 Mechanical power presses -- Testing of the accuracy
JIS B 6406:1991 Mechanical presses -- Methods of measurement of A-weighted sound pressure level

ISA - International Society of Automation, Leak detector pressure

ISA 67.03-1982 Light Water Reactor Coolant Pressure Boundary Leak Detection

Korean Agency for Technology and Standards (KATS), Leak detector pressure

KS B 6730-1995 Pressure and leak tests for pressure vessels
KS B 5648-2002 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS B 6730-1995(2010) Pressure and leak tests for pressure vessels
KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS B ISO 6899:2007 Acceptance conditions of open front mechanical power presses-Testing of the accuracy
KS B ISO 6899:2014 Acceptance conditions of open front mechanical power presses－Testing of the accuracy
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS D ISO 10332:2002 Seamless and welded(except submerged arc-welded) steel tubes for pressure purposes－Ultrasonic testing for verification of hydraulic leak-tightness
KS D ISO 9598:2002 Seamless steel tubes for pressure purposes－Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
KS D ISO 10332-2002(2018)
KS B 6755-2018 Pressure vessel－In-service inspection
KS D ISO 9402:2002 Seamless and welded(except submerged arc-welded) steel tubes for pressure purposes-Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
KS B 4059-2021 Mechanical power presses — Testing of the accuracy
KS B 4059-2001(2021) Mechanical power presses－Testing of the accuracy
KS B 5533-1993 Compression testing machines
KS B ISO 16092-2:2020 Machine tools safety — Presses — Part 2: Safety requirement for mechanical presses
KS B 6755-2005 Pressure vessel－In-service inspection
KS B ISO 8540:2012 Open front mechanical power presses－Vocabulary
KS B ISO 8540:2020 Open front mechanical power presses — Vocabulary
KS B 4232-2007 Safety of machine tools-Mechanical presses
KS B 4232-2014 Safety of machine tools－Mechanical presses
KS B 4232-2019 Safety of machine tools — Mechanical presses
KS B ISO 16092-4:2020 Machine tools safety — Presses —Part 4: Safety requirements for pneumatic presses
KS D ISO 12095:2002 Seamless and welded steel tubes for pressure purposes－Liquid penetrant testing
KS W 3114-1993 Aircraft-Ground Pressure testing connections for pressure cabins
KS W 3114-2013 AIRCRAFT-GROUND PRESSURE TESTING CONNECTIONS FOR PRESSURE CABINS
KS W 3114-2003(2008) AIRCRAFT-GROUND PRESSURE TESTING CONNECTIONS FOR PRESSURE CABINS
KS D ISO 9598-2002(2017) Seamless steel tubes for pressure purposes－Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
KS R 5024-2008(2018) Oil pressure gauges for automobiles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Leak detector pressure

GB/T 25752-2010 Differential pressure air leak tester
GB/T 30040.2-2013 Leak detection systems.Part 2:Pressure and vacuum systems
GB/T 11813-1996 Helium leak testing of nuclear fuel rod for PWR
GB/T 11813-2008 Helium leak testing of nuclear fuel rod for PWR
GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Inspection of static uniaxial testing machines - Part 1: Inspection and calibration of force measuring systems of tensile and/or compressive testing machines
GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels leakage measurement
GB/T 41822-2022 Hot helium leak test methods for high temperature pressure-bearing components in nuclear fusion reactors
GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system
GB/T 3722-1992 Hydraulic compression testing machines
GB/T 16825.2-2005 Verification of static uniaxial testing machines.Part 2:Tension creep testing machines.Verification of the applied force
GB/T 16825.2-2018 Verification of static uniaxial testing machines.Part 2:Tension creep testing machines.Verification of the applied force
GB 26483-2011 Noise limits of mechanical presses
GB/T 25151.5-2010 Fabrication and inspection method for high pressure urea equipment.Part 5:Ammonia leakage test method for urea high pressure equipment
GB/T 25151.6-2014 Fabrication and inspection method for high pressure urea equipment.Part 6:Helium leakage test method for urea high pressure equipment
GB/T 23280-2009 Open front mechanical power presses.Testing of the accuracy
GB/T 23482-2009 Open front mechanical powder presses.Vocabulary
GB/T 9165-1988 Open front mechanical power presses--Testing of the accuracy

Professional Standard - Electricity, Leak detector pressure

DL/T 607-1996 Test on water leakage or hydrogen leakage of Steam-turbine Generator
DL/T 607-2017 Inspection of Water Leakage and Hydrogen Leakage of Turbine Generator
DL/T 2611-2023
DL/T 573-1995 Guiding principle for examining and repairing power transformers
DL/T 573-2010 Maintenance Guide for Power Transformers

Society of Automotive Engineers (SAE), Leak detector pressure

SAE J2797-2014 Power Cylinder Blow-By: Blow-By Mechanisms
SAE J1235-1986 Measuring and Reporting the Internal Leakage of a Hydraulic fluid power Valve
SAE J1235-2023 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve
SAE AS408B-1991 PRESSURE INSTRUMENTS - FUEL, OIL and HYDRAULIC (RECIPROCATING ENGINE POWERED AIRCRAFT)
SAE ARP6175A-2022 Definition, Recognition, Troubleshooting, and Repair of Aircraft Hydraulic System External Leakage

SAE - SAE International, Leak detector pressure

SAE J2797-2007 Power Cylinder Blow-By: Blow-By Mechanisms
SAE J2797-2022 Power Cylinder Blow-By: Blow-By Mechanisms
SAE J1235-2015 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve
SAE J1235-1978 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve@ Recommended Practice
SAE ARP6175-2019 Recommended Practice Regarding Commercial Aircraft Hydraulic System External Leakage

Professional Standard - Aerospace, Leak detector pressure

QJ 3089-1999 Helium Mass Spectrometry Positive Pressure Leak Detection Method
QJ 2862-1996 Test method for leak detection of pressure vessel weld seam helium mass spectrometry sniffing gun cover box
QJ 3212-2005 Test methods for leaks using the helium mass spectrometer leak detector in the inside-out testing mode
QJ 1540-1988 One-step rapid leak detection and screening method with pressurized nitrogen filling
QJ 3182-2003 General Leak Detection Method for Liquid Rocket Engine

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Leak detector pressure

GJB/J 5461-2005 Verification regulation for leak tester of digital difference pressure

Military Standard of the People's Republic of China-General Armament Department, Leak detector pressure

GJB 8686-2015 Calibration procedures for digital differential pressure leak detectors
GJB 5009-2001 Leak inspection method for steam generator of submarine nuclear power plant

工业和信息化部/国家能源局, Leak detector pressure

JB/T 20170-2016 Injection electronic leak detector
JB/T 13188-2017 Positive pressure pneumatic conveyor
JB/T 6490-2015 Plastic pressure forming machine
JB/T 12821-2016 Powerful belt press
JB/T 13284-2017 Precision forging press
JB/T 12900-2016 Earthmoving machinery pressure gauge
JB/T 12510-2014 Medium thick steel plate pressure leveling hydraulic press

U.S. Air Force, Leak detector pressure

AIR FORCE MIL-PRF-32051 (1)-2001 TESTER, PRESSURIZED CABIN LEAKAGE, LARGE AIRCRAFT, TRAILER MOUNTED
AIR FORCE MIL-PRF-32051-1999 TESTER, PRESSURIZED CABIN LEAKAGE, LARGE AIRCRAFT, TRAILER MOUNTED
AIR FORCE MIL-PRF-26139 C (1)-1999 TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1)
AIR FORCE MIL-PRF-26139 C-1997 TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1)
AIR FORCE QPL-5498-24-1991 ACCUMULATORS, AIRCRAFT HYDROPNEUMATIC PRESSURE

Group Standards of the People's Republic of China, Leak detector pressure

T/CAMS /CICEIA24-2019 Reciprocating internal combustion engine-Turbocharger- Method for leakage-measurement
T/CNEA 103.8-2021 PWR pressure boundary components—Non-destructive testing— Part8:Leak testing
T/CSEE 0293-2022 Leak detection guidelines for turbine generator vacuum systems
T/CEC 279-2019 Technical specification for detection of hydrogen leakage in generator stator cooling water
T/SMA 0041-2023 Operation specification for the internal inspection robots used in large power transformers
T/CMES 16003-2021 Hydrogen pressure cycle test and leak/penetration test method of high-pressure hydrogen storage system for vehicles
T/SMA 0005-2019 On-site test specification for power transformer sudden-change pressure relay
T/NTAS 019-2023
T/GZSEIA 0009-2023 Pressure vessel annual inspection specification
T/ACEF 003-2020 Guidelines for the audit and evaluation of volatile organic compounds Leak Detection and Repair projects
T/ZZB 0167-2017 High strength and precision open front mechanical power presses
T/QGCML 848-2023 Constant pressure valve and its detection device

Taiwan Provincial Standard of the People's Republic of China, Leak detector pressure

CNS 9801-2001 Pressure and leak for pressure vessels
CNS 3421-1987 Safety Code for Power Rolling Machines (Inspection)
CNS 9467-1982 Method Test for Test Device for Cylinder Pressure of Gasoline Engine
CNS 10215-2001 Sight glasses for pressure vessels
CNS 3419-1987 Safety Code for Power Press ( Power Press Auxiliary Equipment )
CNS 3739-1985 Method of Test for High Voltage Power Capacitors
CNS 4728-1986 Method of Test for Power Rice Transplanters
CNS 5679-1980 Method of Test for Power Thrasher
CNS 3255-1981 Power Sprayers (High Pressure)
CNS 5708-1980 Method of Test Pressure Compensating Type Flow Control Valves for Hydraulic Use
CNS 9212-1982 Method of Test for Compression Testing Machines
CNS 10539-1994 Test Code for Performance of Hot Presses
CNS 10219-1994 Test Code for Accuracy of Hot Presses
CNS 5031-1984 Method of Test for Projection Welding Machine
CNS 10214-1983 Method of Test for Air Vessel for Filling Use (Total Pressure Ratio Below 30) and for Small Size Displacement Compressor (Shaft Horsepower Below 5.5 KW)
CNS 3417-1987 Safety Code for Power Press ( Construction and Installation of Press )

International Organization for Standardization (ISO), Leak detector pressure

ISO/CD 6366:2023 Non-destructive testing — Leak testing — Radioactive tracer methods for pressured vessels and underground pipelines
ISO 6899:1984 Acceptance conditions of open front mechanical power presses; Testing of the accuracy
ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO 10332:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness
ISO 16092-2:2019 Machine tools safety — Presses — Part 2: Safety requirement for mechanical presses
ISO 16092-4:2019 Machine tools safety — Presses — Part 4: Safety requirements for pneumatic presses
ISO/FDIS 24367:2023 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
ISO 24367:2023 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment

Professional Standard - Energy, Leak detector pressure

NB/T 25025-2014 Guideline on water leakage or hydrogen leakage of generator of nuclear power plants
NB/T 47013.12-2015 Nondestructive testing of pressure equipment.Part 1 2: Magnetic flux leakage testing
NB/T 47013.8-2012 Nondestructive testing of pressure equipments.Part 8:Leak Testing
NB/T 47013.12-2015 Nondestructive Testing of Pressure Equipment Part 12: Magnetic Flux Leakage Testing
NB/T 20003.8-2010 Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 8: Leak testing
NB/T 20003.8-2021 Non-destructive testing of nuclear island machinery and equipment in nuclear power plants Part 8: Leakage testing

National Metrological Technical Specifications of the People's Republic of China, Leak detector pressure

JJF 1986-2022 Calibration specification for differential pressure airtight leak detector
JJF(航空) 006-1983 Calibration method of mercury-free pressure gauge
JJF(航空) 005-1983 Pressure sensor (static) verification method

Professional Standard - Commodity Inspection, Leak detector pressure

SN/T 0813-1999 Metal forming machinery for export.Rules for the inspection of bench press machine
SN/T 0507-1995 Rules for the inspection of open front mechanical power presses for export
SN/T 1179-2003 Inspection regulations for export power transformers

Professional Standard - Machinery, Leak detector pressure

JB/T 10765-2007 Non-destructive testing-Magnetic flux leakage testing of atmospheric pressure metal storage tanks
JB/T 10765-2023 Non-destructive testing—Magnetic flux leakage testing of atmospheric pressure metal storage tanks
JB/T 10936-2010 Belt conveyor.Detector of funnel plug
JB 4730-1994 Nondestructive testing of pressure vessels
JB/T 11811-2014 Manual press
JB/T 8469-1996 Fully hydraulic static pile drivers
JB/T 5110.7-1992 Screw press die Clamping rings
JB/T 12524-2015 Hot die forging presses
JB/T 6059.1-1992 Forging die for mechanical press machines Guide pillar
JB/T 6962.1-1993 Forging die for mechanical press machines Die holders
JB/T 6962.2-1993 Forging die for mechanical press machines Backing plates
JB/T 6962.3-1993 Forging die for mechanical press machines Die block
JB/T 11437-2013 Pressure control for air compressor
JB/T 5523-1991 Hydraulic spring pressure testing machine
JB/T 12291-2015 Straight-side press.Terminology
JB/T 5198-2015 Forging screw presses.Testing of the accuracy
JB/T 6490-1992 Pressurized pressure forming machine
JB/T 6580-1993 Open press Precision
JB/T 5247.3-1999 Table press Precision
JB/T 12097-2014 Pneumatic bench press
JB/T 6499.1-1992 Trimming die of mechanical press. Guide pillar
JB/T 6499.2-1992 Trimming die of mechanical press. Guide bushing
JB/T 6059.8-1992 Forging die for mechanical press machines Guide pins
JB/T 6059.9-1992 Forging die for mechanical press machines Locator key
JB/T 12510-2015 Pressure leveling hydraulic press for medium and heavy steel plate
JB/T 2474-1999 Hydraulic screw press Basic parameters

GM North America, Leak detector pressure

GM 9985522-1989 Dye, Fluorescent, Engine Oil Leak Detection
GM 9985541-1989 Additive, Fluorescent Engine Oil Leak Detection
GM 9985522-2009 Dye, Fluorescent, Engine Oil Leak Detection Revision C
GM 9985522-2014 Dye, Fluorescent, Engine Oil Leak Detection (Issue 9)

American Society for Testing and Materials (ASTM), Leak detector pressure

ASTM E570-97(2004)e1 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM E570-97 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM F2164-18 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
ASTM E2930-13(2021) Standard Practice for Pressure Decay Leak Test Method
ASTM F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM F2786-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
ASTM F2786-16 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM F3535-21 Standard Practice for Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM E570-15 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM E570-15e1 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM E570-09 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
ASTM F2164-02 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ASTM F2164-02(2007) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ASTM F2164-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure

Shandong Provincial Standard of the People's Republic of China, Leak detector pressure

DB37/T 1879-2011 Acoustic emission detection code for leaks in pressurized systems
DB37/T 3067-2017 Pressure Vessel Hardness Testing

National Metrological Verification Regulations of the People's Republic of China, Leak detector pressure

JJG 139-2014 Tension, Compression and Universal Testing Machines
JJG 139-1999 Verification Regulation of Universal Tension and Compression Testing Machine
JJG(石油) 07-1999 Verification Regulation of Mechanical Pressure Gauge
JJG 730-1991 Verification Regulation of the Diesel Engine Peak Pressure Indicator
JJG(铁道) 189-2004 Verification Regulations for Diesel Engine Peak Pressure Gauge
JJG(铁道) 193-2007 Bourdon Pressure Gauge for Railway Locomotives and Vehicles
JJG(铁道) 183-2004 Verification Regulations for Locomotive Electrical Measurement and Remote Transmission Pressure Gauge
JJG 157-2008 Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic
JJG 157-1995 Verification Regulation of Tension Compression and Universal Testing Machina for Non-metallic
JJG 432-1986 Verification Regulation for Pressure Measuring Device Electrically Indicated on Diesel Locomotives
JJG(铁道) 189-2010 Verification rules for measuring device for maximum combustion pressure of diesel engine
JJG 927-1997 Verification Regulation of Tyre Pressure Gauge
JJG 544-1997 Verification Regulation of Pressure Contuoller
JJG 946-1999 Verification Regulation of Pressure Tide Gauge
JJG(石油) 23-1992 Verification regulation of pressure transmitter
JJG 882-1994 Verification Regulation of Pressure Transmitters
JJG 927-2013 Verification Regulation of Tyre Pressure Gauges
JJG 544-2011 Verification Regulation of Pressure Controllers
JJG 882-2019 Verification Regulation of Pressure Transmitters
JJG(化工) 16-1989 Pressure Transmitter Verification Regulations
JJG(化工) 29-1989 Pressure Transmitter Verification Regulations
JJG 926-2015 Verification Regulation of Record Pressure Gauges, Pressure Vacuum Gauges and Vacuum Gauges
JJG 926-1997 Verification Regulation of the Record Pressure Gauge、Pressure Vacuum Gauge and Vacuum Gauge
JJG 942-1998 Verification Regulation of Ball Pneumatic Dead Weight Tester
JJG 2023-1989 Verification Scheme of Measuring Instruments for Manometers
JJG 59-2007 Piston Gauge
JJG 942-2010 Verification Regulation of Ball Pneumatic Dead Weight Testers
JJG(地质) 1023-1994 Verification Regulations for Unlimited Pressure Apparatus
JJG(机械) 108-1992 Verification Regulations for Electric Contact Pressure Gauge
JJG 310-2002 Verification Regulations for Pressure Thermometers
JJG(机械) 112-1992 Regulations for Verification of Anti-shock Pressure Gauge
JJG 734-2001 Verification Regulation of Force Standard Machines
JJG 860-2015 Verification Regulation of Pressure Transducer (Static)
JJG 860-1994 Verification Regulation of the Pressure Transducer(Static)
JJG 457-1986 Verification Regulation of Single Tube Mercury Manometer
JJG 274-1981 Verification Regulation of Double Tube Mercury Barometer
JJG 274-2007 Double Tube Mercury Barometer
JJG(航天) 1-1981 0.16 grade precision pressure gauge verification regulations
JJG(机械) 107-1992 Calibration rules for circular chart pressure recorder
JJG 1117-2015 Hydraulic-amplification Force Standard Machines
JJG 52-1999 Verification Regulation of Bourdon Tube Pressure Gauge、Pressure Vacuum Gauge and Vacuum Gauge for General Use

NZ-SNZ, Leak detector pressure

SAA/SNZ MP76-1997 Pressure Equipment - Inspection Bodies and Personnel
AS/NZS 4481:1997 Pressure Equipment - Competencies of Inspectors
AS/NZS 3788:2006 Pressure Equipment - In-Service Inspection

Standard Association of Australia （SAA）, Leak detector pressure

MP 76-1997 Pressure equipment - Inspection bodies and personnel
AS/NZS 1268:1996 Equipment for checking pressure and inflation of tyres
AS/NZS 3788:2001 Pressure equipment - In-service inspection
AS 4024.3002:2021 Safety of machinery, Part 3002: Machine tools safety — Presses — Safety requirement for mechanical presses
AS 4024.3004:2021 Safety of machinery, Part 3004: Machine tools safety — Presses — Safety requirements for pneumatic presses
AS 4024.3001:2009

RO-ASRO, Leak detector pressure

STAS 6679/17-1985 Metal cutting machine-tools FRONT RUN-OUT CHECKING METHODS
STAS 11744-1980 Mecanical presses HIGH SPEED PRESSE Main parameters
STAS SR ISO 3458:1995 Assembled jpints between fittings polyethylene (PE) pressure pipes -Test of leakproofness under internal pressure
STAS 10179-1980 Mechanical presses OPEN BED ECCENTRIC PRESSES Main parameters
STAS 12599-1987 POWER PRESSES Classification and terminology
STAS 11734-1980 DRAWING HYDRAULIC PRESSE Main parameters

API - American Petroleum Institute, Leak detector pressure

API PUBL 4716-2002 Buried Pressurized Piping Systems Leak Detection Guide
API RP 572-1992 Inspection of Pressure Vessels
API TR 1149-2015 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (SECOND EDITION)
API PUBL 1149-1993 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (First Edition)
API RP 572-2009 Inspection Practices for Pressure Vessels (Third Edition)
API RP 572 CHINESE-2009 Inspection Practices for Pressure Vessels (Third Edition)

Professional Standard - Petroleum, Leak detector pressure

SY/T 5430-1992 Determination of Formation Fracture Pressure Casing Shoe Leak Test Method

能源部, Leak detector pressure

SY 5430-1992 Casing shoe leak test method for determination of formation rupture pressure

Jilin Provincial Standard of the People's Republic of China, Leak detector pressure

DB22/T 3032-2019 Spinning pressure testing rules for horizontal CNC spinning machine tools

国家能源局, Leak detector pressure

NB/T 20528-2018 Acoustic emission monitoring of leakage before pressure pipe break in pressurized water reactor nuclear power plant

RU-GOST R, Leak detector pressure

GOST 34068-2017 Gas supply system. Natural gas production. Field pipelines. Mechanical safety. Pressure and leak tests
GOST 26689-1985 Injection moulding machines. Methods of technological parameters control
GOST 8.136-1974 State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means
GOST EN 692-2014 Safety of machine tools. Mechanical presses
GOST 8.053-1973 State system for ensuring the uniformity of measurements. Pressure, combined pressure-vacuum, vacuum, gauges and draught gauges with pneumatic output signals. Methods of verification
GOST R ISO 10332-1999 Seamless and welded ( except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the verification of hydraulic leak-tightness

United States Navy, Leak detector pressure

NAVY MS33565 REV C NOTICE 2-1996 CONNECTIONS, GROUND LEAKAGE TEST, PRESSURIZED CABIN AIRCRAFT
NAVY MS33565 REV C VALID NOTICE 1-1992 CONNECTIONS, GROUND LEAKAGE TEST, PRESSURIZED CABIN AIRCRAFT
NAVY MS33565 REV C-1977 CONNECTIONS, GROUND LEAKAGE TEST, PRESSURIZED CABIN AIRCRAFT
NAVY MIL-V-6129 A-1964 VALVE, CHECK; VACUUM AND PRESSURE SYSTEM
NAVY MIL-I-38133 A NOTICE 1-1996 INDICATOR, PRESSURE, OIL
NAVY MIL-I-38133 A-1967 INDICATOR, PRESSURE, OIL

Association of German Mechanical Engineers, Leak detector pressure

VDI 3145 Blatt 2-1985 Presses for cold forging; multi-stage presses

Professional Standard - Agriculture, Leak detector pressure

CNAS-CI01-A001-2021 Instructions for the application of the Ability Accreditation Criteria for Inspection Institutions in the field of inspection of boilers, pressure vessels (including gas cylinders), and pressure piping

YU-JUS, Leak detector pressure

JUS G.S3.509-1991 Fitting for unplasticized polyvinyl chloride (PVC) with elastic sealing ring type joints.Pressure test for leakproofness
JUS G.S3.510-1991 Fitting for unplasticized polyvinyl chloride (PVC) with elastic sealing ring type joints. Pressure test for leakproofness under conditions of external hydraulic pressure

Indonesia Standards, Leak detector pressure

SNI 13-3498-1994 Pressure vessels inspection

HU-MSZT, Leak detector pressure

FI-SFS, Leak detector pressure

SFS 3270 E-1975
SFS 3270-1975 PAINEASTIAN TARKASTUS. RAKENNETARKASTUS
SFS 3334-1977
SFS 3280 E-1984 In case of interpretation disputes the Finnish version applies. Date of translation 1986-05-15

American National Standards Institute （ANSI), Leak detector pressure

ANSI/ASTM F2786:2010 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
ANSI/AWS D14.5/D14.5M:2009 Specification for Welding of Presses and Press Components
ANSI/ASTM F2164:2013 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems using Hydrostatic Pressure
ANSI B11.1-2009(R2020) Safety Requirements for Mechanical Power Presses
ANSI/ASME B5.52-2003 Power Presses - General Purpose Single Gap Type
ANSI/ASME PCC-2-2011 Repair of Pressure Equipment and Piping
ANSI B11.2-2013(R2020) Safety Requirements for Hydraulic and Pneumatic Presses

SE-SIS, Leak detector pressure

SIS SMS 845-1948

Professional Standard - Electron, Leak detector pressure

SJ/T 31030-1994 Requirements of readiness and methods of inspection and assessment for open front presses
SJ/T 31031-1994 Requirements of readiness and methods of inspection and assessment for closed front presses

DE-GPVA, Leak detector pressure

AD 2000-Merkblatt HP801 No.10-2002 Manufacture and testing of pressure vessels.Special pressure vessels.Spray pressure vessels
AD 2000-Merkblatt HP30-2016 Manufacture and testing of pressure vessels. Performance of pressure tests
AD 2000-Merkblatt B 5-2016 eng Manufacture and testing of pressure vessels. Performance of pressure tests
AD 2000-Merkblatt HP4-2014 Manufacture and testing of pressure vessels.Test supervisors and testers in non-destructive testing
AD 2000-Merkblatt HP801 No.19-2002 Manufacture and testing of pressure vessels.Special pressure vessels.Pressure vessels with lining or masonry lining
AD 2000-Merkblatt HP801 No.25-2004 Manufacture and testing of pressure vessels.Special pressure vessels.Liquefied gas storage vessel installation

ZA-SANS, Leak detector pressure

SANS 10227:2007 Criteria for the operation of inspection authorities performing inspection in terms of the Pressure Equipment Regulations

AWS - American Welding Society, Leak detector pressure

D14.5-1997 Specification for Welding of Presses and Press Components
D14.5-1980 Specification for Welding of Presses and Press Components
D14.5/D14.5M-2009 Specification for Welding of Presses and Press Components (3rd Edition)
PRGVT-1999 The Practical Reference Guide for Welding Inspection Management - Visual Inspection of Pressure Vessels and Pressure Piping

Professional Standard - Nuclear Industry, Leak detector pressure

EJ/T 20150.12-2018 Post-irradiation inspection of PWR rod-bundle fuel assemblies-Part 12: Fuel rod leak detection end compression method
EJ/T 668-1992 Design criteria for reactor coolant pressure boundary leak detection system for pressurized water reactor nuclear power plants
EJ/T 20150.10-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 10: Bubble method for fuel rod leak detection
EJ/T 20150.11-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 11: Helium Mass Spectrometry for Fuel Rod Leakage Detection
EJ/T 388-1989 Technical Specifications for Helium Leakage Detection of Steam Generators in 300 MW PWR Nuclear Power Plants

NL-NEN, Leak detector pressure

NEN 927-1963 Pressure gauges. Testing and gauging
NEN-EN 437-1994 Test gases.Test pressures.Appliance categories
NEN-ISO 2874:1993 Packaging. Complete, filled transport packages. Stacking test using compression tester (ISO 2874:1985)
NEN 5453-1-1968
NEN 5453-4-1966
NEN 5453-5-1963
NEN 5453-8-1965
NEN 5453-9-1965
NEN 5453-3-1965
NEN 5453-6/7-1963

CN-STDBOOK, Leak detector pressure

图书 A-4545 Pressure gauge verification and calibration

KR-KS, Leak detector pressure

KS B 6755-2018(2023) Pressure vessel－In-service inspection
KS B ISO 16092-2-2020 Machine tools safety — Presses — Part 2: Safety requirement for mechanical presses
KS B ISO 8540-2020 Open front mechanical power presses — Vocabulary
KS B ISO 16092-4-2020 Machine tools safety — Presses —Part 4: Safety requirements for pneumatic presses
KS B 4059-2022 Mechanical power presses — Testing of the accuracy
KS D ISO 10332-2002(2023)

PL-PKN, Leak detector pressure

PN M68005-1974 Hydraulic presses Capaci?y of ?he press
PN-EN ISO 16092-2-2021-02 E Machine tools safety -- Presses -- Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
PN M48025 ArkusZ1-1973 Statical road rollers lassification
PN-EN ISO 16092-4-2021-02 E Machine tools safety -- Presses -- Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

IN-BIS, Leak detector pressure

Professional Standard - Chemical Industry, Leak detector pressure

HG/T 3176-2002 Fabrication and inspection method for High pressure urea equipment ammonia leakage test the method for high pressure urea equipment

国家市场监督管理总局、中国国家标准化管理委员会, Leak detector pressure

GB/T 23711.7-2019 Test method for pressure vessels lined with plastics—Part 7:Leakage testing
GB/T 37902-2019 NC high speed press

Jiangsu Provincial Standard of the People's Republic of China, Leak detector pressure

DB32/T 4486-2023 Gasket coefficient (m) and specific pressure (y) test method based on leakage rate

American Society of Mechanical Engineers (ASME), Leak detector pressure

ASME B5.49M-1984 Glossary of mechanical press terms
ASME B5.49-1998 Glossary Of Power Press Terms
ASME B5.61-2003 Power Presses: General Purpose, Single-Action, Straight Side Type
ASME B5.52-2003 Power Presses: General Purpose, Single-Point Gap Type
ASME B5.52M-1980 Mechanical power presses - General purpose single point, GAP Type (Metric)

American Welding Society (AWS), Leak detector pressure

AWS D14.5-1997 Specification for Welding of Presses and Press Components

North Atlantic Treaty Organization Standards Agency, Leak detector pressure

STANAG 4113-1993 PRESSURE MEASUREMENT BY CRUSHER GAUGES

Defense Logistics Agency, Leak detector pressure

DLA A-A-59568 A-2013 GAGES, MECHANICAL, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE
DLA MIL-P-45051 D NOTICE 1-1999 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
DLA MIL-P-45051 D (1)-1986 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
DLA MIL-P-45051 D-1985 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
DLA AN6015 REV 6 NOTICE 2-1999 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
DLA AN6015 REV 6 NOTICE 1-1999 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B
DLA AN6015 REV 6-1972 VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE B

CZ-CSN, Leak detector pressure

CSN 47 6826-1953
CSN 13 2000-1976 Cast iron pressure pipes and pipe fittings-Survcy
CSN ON 10 5105-1965 Scrow compressors. Nooiinal outputs of compressors and ítheir pressuires.
CSN 09 0127-1966 Internal oombustion engines. Correction of power and fuel consumption of compression-ignition (Diesel) engines pressure - charged by turbo-blower

ES-UNE, Leak detector pressure

UNE-EN ISO 16092-2:2021 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
UNE-EN ISO 16092-4:2021 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

GB-REG, Leak detector pressure

REG NASA-LLIS-0420-1996 Lessons Learned ?VO'75 Pressure Regulator Leakage and Work-Around Procedures (~1976)

BE-NBN, Leak detector pressure

NBN-EN 10002-2-1992 Metallic materials - Tensile testing - Part 2 : Verification of the force measuring system of the tensile testing machines
NBN-ISO 5941:1989 Compressors, pneumatic tools and machines - Preferred pressures

Professional Standard - Military and Civilian Products, Leak detector pressure

WJ 2434-1997 Static verification regulations for high-pressure sensors

机械工业部, Leak detector pressure

JB/T 6060.15-1992 Screw press forging die ring
JB/T 6060.11-1992 Mechanical press forging die guide column
JB/T 6060.12-1992 Mechanical press forging die guide bushing
JB/T 6060.13-1992 Mechanical press forging die positioning pin
JB/T 6060.14-1992 Mechanical press forging die positioning key

AT-ON, Leak detector pressure

ONORM L 1067-1988 Physical investigations ofsoil; determination ofpressure Potential by tensiometer
OENORM EN ISO 16092-2:2021 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
OENORM EN ISO 16092-4:2021 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Leak detector pressure

GB/T 34383-2017 Semi-straight side press
GB/T 26483-2011 Noise limits of mechanical presses
GB/T 35974.4-2018 Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels

Professional Standard - Special Equipment Specification, Leak detector pressure

TSG R7001-2013 Pressure Vessel Periodical Inspection Regulation
TSG R7004-2013 Regulation on Supervision Inspection for Pressure Vessel
TSG D7006-2020 Pressure pipeline supervision and inspection rules
TSG R7001-2004 Rules for Periodic Inspection of Pressure Vessels

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Leak detector pressure

ASHRAE OR-05-13-1-2005 Detecting Critical Supply Duct Pressure

Professional Standard - Environmental Protection, Leak detector pressure

HJ 1230-2021 Technical Guidelines for Detection and Repair of Volatile Organic Compound Leakage in Industrial Enterprises
HJ 733-2014 Guideline for the determination of volatile organic compound leaks and uncovered liquid surface emissions

Henan Provincial Standard of the People's Republic of China, Leak detector pressure

DB41/T 2364-2022 Technical specifications for detection and repair of volatile organic compounds in industrial enterprises

Professional Standard - Light Industry, Leak detector pressure

QB/T 1755-1993 Paper Machinery Pressure Washer
QB/T 1164-2000 Pressure spray dryer

中国国家认证认可监督管理委员会, Leak detector pressure

RB/T 218-2017 Inspection and testing agency qualification accreditation capability evaluation requirements for motor vehicle inspection agencies

BR-ABNT, Leak detector pressure

ABNT MB-12-1940

American Petroleum Institute (API), Leak detector pressure

API RP 572-2016 Inspection Practices for Pressure Vessels

Professional Standard - Certification and Accreditation, Leak detector pressure

RB/T 214-2017 Competence assessment for inspection body and laboratory mandatory approval.Genaral requirements for inspection body and laboratory

工业和信息化部, Leak detector pressure

JB/T 2474-2018 Basic parameters of hydraulic screw press

Aerospace Industries Association/ANSI Aerospace Standards, Leak detector pressure

AIA/NAS NAS939-2012 PRESS - HYDRAULIC, TYPE I SINGLE ACTION RAM WITH DIE CUSHION Rev 1

Hunan Provincial Standard of the People's Republic of China, Leak detector pressure

DB43/T 2208-2021 General requirements for the capabilities of grain inspection and testing institutions