ZH
RU
ES

spectral photons

spectral photons, Total:154 items.

In the international standard classification, spectral photons involves: Vocabularies, Analytical chemistry, Optical equipment, Particle size analysis. Sieving, Optics and optical measurements, Non-destructive testing, Fuels, Air quality, Non-ferrous metals, Animal feeding stuffs, Products of the chemical industry, Soil quality. Pedology, Testing of metals, Metrology and measurement in general, Wastes, Electronic components in general, Environmental protection, Electrical engineering in general, Water quality, Inorganic chemicals, CHEMICAL TECHNOLOGY, Road vehicle systems, Metalliferous minerals, Rubber and plastics products, Electricity. Magnetism. Electrical and magnetic measurements.

Association Francaise de Normalisation, spectral photons

NF X43-275:2002 Qualité de l'air - Air des lieux de travail - Dosage d'éléments présents dans l'air des lieux de travail par spectrométrie atomique
NF S11-700*NF ISO 20473:2007 Optics and photonics - Spectral bands.
NF ISO 20473:2007 Optique et photonique - Bandes spectrales
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF X11-672:1996 Particle size analysis. Photon correlation spectroscopy.
NF X43-205*NF ISO 17733:2016 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
NF ISO 17733:2016 Air des lieux de travail - Détermination du mercure et des composés inorganiques de mercure - Méthode par spectrométrie d'absorption atomique ou spectrométrie de fluorescence atomique de la vapeur froide
NF X31-432*NF ISO 16772:2004 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
NF B30-111*NF ISO 1776:1986 Glass. Resistance to attack by hydrochloric acid at 100 degrees Celsius. Flame emission or flame atomic absorption spectrometric method.
NF A08-651:1993 Chemical analysis of titanium and aluminium alloys. Determination of elements contents in low content in the TA6V alloy. Method by flame atomic absorption spectrometry or by plasma emission spectrometry.
NF ISO 16772:2004 Qualité du sol - Dosage du mercure dans les extraits de sol à l'eau régale par spectrométrie d'absorption atomique de vapeur froide ou par spectrométrie de fluorescence atomique de vapeur froide
NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

German Institute for Standardization, spectral photons

DIN 51401:2016 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary
DIN 51401:2016-11 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary
DIN 51401 Beiblatt 1:2017-07 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary; Supplement 1: Explanations
DIN ISO 13321:2004 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
DIN 51401 Bb.1:2017 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary; Supplement 1: Explanations
DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
DIN ISO 16772:2005 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry (ISO 16772:2004)
DIN ISO 16772:2005-06 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry (ISO 16772:2004)
DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
DIN ISO 16129:2020 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
DIN CEN/TS 16731:2015-01*DIN SPEC 10520:2015-01 Foodstuffs - Determination of hydride-reactive arsenic compounds in rice by atomic absorption spectrometry (Hydride-AAS) following acid extraction; German version CEN/TS 16731:2014

International Organization for Standardization (ISO), spectral photons

ISO 20473:2007 Optics and photonics - Spectral bands
ISO 13321:1996 Particle size analysis - Photon correlation spectroscopy
ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 16772:2004 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
ISO/TR 18392:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds
ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS

British Standards Institution (BSI), spectral photons

BS ISO 20473:2007 Optics and photonics. Spectral bands
BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS ISO 16129:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS ISO 16772:2004 Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
BS 7709-5:1993 Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
BS ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 17733:2015 Tracked Changes. Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
BS ISO 17733:2004 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry

American Society for Testing and Materials (ASTM), spectral photons

ASTM E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E1613-04 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E996-10(2018) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E996-19 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM D3084-20 Standard Practice for Alpha-Particle Spectrometry of Water
ASTM D5184-00 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM E995-11 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
ASTM E902-05 Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
ASTM E2735-14 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy 40;XPS41; Experiments
ASTM E2735-13 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E131-02 Standard Terminology Relating to Molecular Spectroscopy
ASTM E131-00a Standard Terminology Relating to Molecular Spectroscopy
ASTM D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM E720-11 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM E131-05 Standard Terminology Relating to Molecular Spectroscopy
ASTM E131-10 Standard Terminology Relating to Molecular Spectroscopy
ASTM E131-10(2023) Standard Terminology Relating to Molecular Spectroscopy

国家市场监督管理总局、中国国家标准化管理委员会, spectral photons

GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy

Standard Association of Australia （SAA）, spectral photons

AS 4549.1:1999 Particle size analysis - Photon correlation spectroscopy
AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
AS ISO 19319:2006 Surface chemical analysis - Augur electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area and sample area viewed by the analyser
AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, spectral photons

GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
GB/T 21191-2007 Atomic fluorescence spectrometer
GB/T 28632-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution
GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 4324.8-2008 Methods for chemical analysis of tungsten.Determination of nickel content.The inductively coupled plasma atomic emission spectrometry、flame atomic absorption spectrometry and dimethylglyoxime gravimetry
GB/T 42027-2022 Gas-phase molecular absorption spectrometer
GB/T 8322-2008 Molecular absorption spectrometry.Terminology
GB/T 8322-1987 Molecular absorption spectrometry--Terminology
GB/T 31470-2015 Standard practice for determination of the specimen area contributing to the detected signal in Auger electron spectrometers and some X-ray photoelectron spectrometers

Professional Standard - Petrochemical Industry, spectral photons

SH/T 0706-2001 Petroleum products-Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods

Japanese Industrial Standards Committee (JISC), spectral photons

JIS B 7079:2015 Optics and photonics -- Spectral bands
JIS K 1201-5:2000 Sodium carbonate for industrial use -- Part 5: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Atomic absorption spectrometry, and inductively coupled plasma atomic emission spectrometry
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
JIS K 1310-3:2000 Hydrochloric acid for industrial use -- Part 3: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Electrothermal type atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry

Korean Agency for Technology and Standards (KATS), spectral photons

KS I ISO 17733-2005(2016) Workplace air－Determination of mercury and inorganic mercury compounds－Method by cold－vapour atomic absorption spectrometry or atomic fluorescence spectrometry
KS I ISO 17733:2021 Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS I ISO 16772:2005 Soil quality-Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
KS I ISO 16772-2005(2015) Soil quality－Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
KS I ISO 16772:2021 Soil quality — Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
KS I ISO 20552:2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS I ISO 20552:2010 Workplace air－Determination of mercury vapour－Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS I ISO 20552-2010(2016) Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS I 20552-2010 Workplace air-Determination of mercury vapour-Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS M 1082-2008(2018) Determination of mercury in leather－Atomic spectrometry
KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
KS M 0016-2010 General rules for atomic absorption spectrochemical analysis

Danish Standards Foundation, spectral photons

DS/ISO 17733:2007 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry

Jilin Provincial Standard of the People's Republic of China, spectral photons

DB22/T 1985-2013 Determination of Inorganic Arsenic in Feed by Liquid Chromatography-Atomic Fluorescence Spectrometry

KR-KS, spectral photons

KS I ISO 17733-2021 Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
KS I ISO 16772-2021 Soil quality — Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
KS I ISO 20552-2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS M 1082-2008(2023) Determination of mercury in leather－Atomic spectrometry

Shandong Provincial Standard of the People's Republic of China, spectral photons

DB37/T 4090-2020 Determination of Inorganic Arsenic in Cosmetics by Liquid Chromatography-Atomic Fluorescence Spectrometry
DB37/T 4089-2020 Determination of thimerosal and phenylmercury in cosmetics by liquid chromatography-atomic fluorescence spectrometry

National Metrological Verification Regulations of the People's Republic of China, spectral photons

JJG 1151-2018 Liquid Chromatograph-Atomic Fluorescence Spectrometers

Professional Standard - Non-ferrous Metal, spectral photons

YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry

Group Standards of the People's Republic of China, spectral photons

T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer

Professional Standard - Agriculture, spectral photons

774兽药典二部-2015 Appendix Contents 0400 Spectroscopy 0403 Atomic Absorption Spectrophotometry
778兽药典一部-2015 Appendix Contents 0400 Spectroscopy 0406 Atomic Absorption Spectrophotometry

工业和信息化部, spectral photons

YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
YS/T 445.11-2019 Methods for chemical analysis of silver concentrates Part 11: Determination of bismuth content Hydride generation-atomic fluorescence spectrometry, flame atomic absorption spectrometry and Na2EDTA titration

Taiwan Provincial Standard of the People's Republic of China, spectral photons

CNS 13875-1997 Method of test for aluminum and silicon in fuel oils by ashing,fusion,inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry
CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 12416-2006 General rules for atomic emission spectrometry
CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis

RU-GOST R, spectral photons

GOST R ISO 20552-2011 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
GOST 27981.1-1988 Copper of high purity. Methods of atomic-spectral analysis
GOST 27981.1-2015 High purity copper. Method of atomic-spectral analysis

Xinjiang Provincial Standard of the People's Republic of China, spectral photons

DB65/T 4367-2021 Water Quality Determination of Methylmercury and Ethylmercury by Liquid Chromatography-Atomic Fluorescence Spectrometry

农业农村部, spectral photons

NY/T 3870-2021 Determination of selenoamino acids in selenoproteins by liquid chromatography-atomic fluorescence spectrometry

Military Standard of the People's Republic of China-General Armament Department, spectral photons

GJB/Z 40.6-1993 Military vacuum electronic devices series spectrum vacuum optoelectronic devices

VN-TCVN, spectral photons

TCVN 1048-2007 Glass.Resistance to attack by hydrochloric acid at 100 degrees C.Flame emission or flame atomic absorption spectrometry method

Professional Standard - Electron, spectral photons

SJ/T 10458-1993 Standard guide for specimen handling in auger electron spectroscopy and X-ray photoelectron spectroscopy

未注明发布机构, spectral photons

BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution

Professional Standard - Environmental Protection, spectral photons

HJ 977-2018 Water quality-Determination of alkylmercury-Purge and Trap/gas chromatography cold vapor atomic fluorescence spectrometry

Lithuanian Standards Office , spectral photons

LST EN 62321-5-2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013)

European Committee for Standardization (CEN), spectral photons

CEN/TS 16731:2014 Foodstuffs - Determination of hydride-reactive arsenic compounds in rice by atomic absorption spectrometry (Hydride-AAS) following acid extraction

RO-ASRO, spectral photons

SR ISO 315:1995 Manganese ores and concentrates. Determination of nickel content-Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method

Professional Standard - Commodity Inspection, spectral photons

SN/T 3134-2012 Determination of thimerosal residues in foodstuffs of animal origin for export.Liquid chromatogram-atomic fluorescence spectrometry(LC-AFS)method

卫生健康委员会, spectral photons

WS/T 635-2018 Determination of Arsenic Speciation in Urinary Liquid Chromatography-Atomic Fluorescence Method