ZH
RU
ES

Pretreatment of heavy metals

Pretreatment of heavy metals, Total:498 items.

In the international standard classification, Pretreatment of heavy metals involves: Water quality, Soil quality. Pedology, Adhesives, Surface treatment and coating, Wastes, Metalliferous minerals, Environmental protection, Lifting equipment, Products of the chemical industry, Test conditions and procedures in general, Testing of metals, Heat treatment, Materials for aerospace construction, Coatings and related processes used in aerospace industry, Mining and quarrying, Vocabularies, Paints and varnishes, Iron and steel products, Corrosion of metals, Analytical chemistry, Protection against fire, Storing. Warehousing, Mining equipment, Farming and forestry, Geology. Meteorology. Hydrology, Jewellery, Occupational safety. Industrial hygiene, Screw threads, Medical sciences and health care facilities in general, Non-ferrous metals, Production of metals, Ferrous metals, Construction materials, Paint coating processes, HEALTH CARE TECHNOLOGY, Paint ingredients, Industrial furnaces, Ergonomics, Aircraft and space vehicles in general, Electronic components in general, Production in the chemical industry, Road engineering, Integrated circuits. Microelectronics, Products of non-ferrous metals, Energy and heat transfer engineering in general, GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION, Nuclear energy engineering, Wood-based panels.

ZA-SANS, Pretreatment of heavy metals

SANS 6168:2004 Water - Pretreatment for metal analysis
SANS 6168:2010 Water - Pretreatment for metal analysis

Standard Association of Australia （SAA）, Pretreatment of heavy metals

AS 4479.1:1997 Analysis of soils - Pretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis
AS 1627.7:1988 Metal finishing—Preparation and pretreatment of surfaces Part 7: Hand tool cleaning of metal surfaces
AS 1627.0:1997 Metal finishing - Preparation and pretreatment of surfaces - Method selection guide
AS 1627.4:2005 Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning of steel
AS 1627.9:2002 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces
AS 1580.105.2:2002(R2013)
AS 1580.105.2:2002 Paints and related materials - Methods of test - Pretreatment of metal test panels - Sanding
AS 1580.105.1:2002(R2013)
AS 1580.105.1:2002 Paints and related materials - Methods of test - Pretreatment of metal test panels - Solvent cleaning
AS 1627.1:2003 Metal finishing - Preparation and pretreatment of surfaces - Removal of oil, grease and related contaimination
AS 4108:2005 Metal finishing - Glossary of terms in electroplating and related processes
AS/NZS 1580.107.2:1995 Paints and related materials - Methods of test - Determination of wet film thickness from wet film mass
AS 1580.107.1:2004 Paints and related materials - Methods of test - Determination of wet film thickness from dry film mass

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Pretreatment of heavy metals

IPC TM-650 2.3.16.2-1994 Treated Weight of Prepreg
IPC TM-650 2.3.16.1-1994 Resin Content of Prepreg, by Treated Weight; Revision C - December 1994

International Organization for Standardization (ISO), Pretreatment of heavy metals

ISO 4588:1995 Adhesives - Guidelines for the surface preparation of metals
ISO 9587:1999 Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 9587:2007 Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary
ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary
ISO 2080:2022 Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
ISO 2080:2008 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
ISO 11127-1:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag
ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness
ISO 11126-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag
ISO 11125-3:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness
ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag
ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag
ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag
ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand
ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot
ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags
ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
ISO 11126-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine
ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag
ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture
ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture
ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne
ISO 11126-10:2017 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet
ISO 11127-5:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture
ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter
ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density
ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
ISO 11126-7:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
ISO 11125-4:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density
ISO 11125-6:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter
ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density
ISO 11127-3:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification
ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit
ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification
ISO 11126-1:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11124-1:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11124-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit
ISO 3134-5:1981 Light metals and their alloys; Terms and definitions; Part 5 : Methods of processing and treatment
ISO 17212:2012 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
ISO 17212:2004 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
ISO 11846:1995 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

Professional Standard - Recommended Standards for Engineering Construction, Pretreatment of heavy metals

CECS 92-2016 Design standard for treatment of wastewater containing heavy metals
CECS 92-1997 Design code for treatment of wastewater containing heavy metals with chemical method

United States Navy, Pretreatment of heavy metals

NAVY MIL-C-8514 C (1)-1999 COATING COMPOUND, METAL PRETREATMENT, RESIN-ACID
NAVY MIL-C-8514 C-1967 COATING COMPOUND, METAL PRETREATMENT, RESIN-ACID
NAVY MIL-C-8507 D NOTICE 1-1997 COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE)
NAVY MIL-C-8507 D-1963 COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pretreatment of heavy metals

GB/T 11373-1989 The general principle of surface preparation of metallic substrate for thermal spraying
GB/T 7232-2023 Metal Heat Treatment Terminology
GB/T 7232-1999 Terminology of metal heat treatment
GB/T 7232-2012 Terminology of metal heat treatment
GB/T 19349-2003 Metallic and other inorganic coatings-Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
GB/T 19349-2012 Metallic and other inorganic coatings.Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
GB/T 26078-2010(英文版) Metallic materials—Welding residual stresses—Method with explosion treatment
GB/T 12603-1990 Classification and designation on metal heat treatment
GB/T 12603-2005 Classifications and designations for metal heat treatment
GB/T 32965-2016 Technical specifications on metal recovery of steel slag
GB/T 13911-1992 Expression methods for metallic coating and chemical treatment
GB 11515-1989 Diagnostic criteria and principles of management of metal fumr fever
GB/T 13911-2008 Designation for metallic coating and chemical treatment
GB 15735-1995 Requirements for the safety and health in production process of metal heat treatment
GB 15735-2004 Requirements for the safety and health in production process of metal heat treatment
GB 15735-2012 Requirements for the safety and health in production process of metal heat treatment
GB/T 26078-2010 Metallic materials.Welding residual stresses.Method with explosion treatment
GB/T 3138-1995 Terminology for metallic coating, chemical treatment and related process
GB/T 3138-2015 Metallic and other inorganic coatings.Surface treatment, metallic and other inorganic coatings.Vocabulary
GB/T 21526-2008 Structural adhesives.Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
GB/T 36174-2018 Corrosion of metals and alloys.Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
GB/T 41824-2022 Quality management specification of metallic materials for items important to safety in nuclear power plants

Group Standards of the People's Republic of China, Pretreatment of heavy metals

T/LZZLXH 037-2020 Specification for treatment of heavy metal wastewater in laboratory
T/CNIA 0007-2019 Rules for Arbitration Handling of Heavy Metal Concentrate Trade
T/SWSTA 0001-2019 Jinze Reservoir Raw Water Pretreatment Technical Guidelines
T/GDNB 124-2022 Guidelines for indirect agricultural use of sewage sludge and recovery of heavy metal residue
T/NDAS 65-2022 Electroplating and nonferrous metal surface treatment industrial wastewater discharge treatment technology
T/CNIA 0010-2019 Rules for Arbitration Handling of Trade in Precious Metal Concentrates
T/GXAS 280-2022 Technical code of practice for production of wood fiber-based heavy metal adsorbent
T/GXAS 281-2022 Technical code of practice for treatment of heavy metal wastewater by modified wood fiber-based adsorbent
T/ACEF 076-2023 Technical guidelines for pollution control of municipal solid waste incineration power plants — heavy metal
T/CSCP 0042-2019 Cathode plasma electrolytic surface preparation— Technical specification for metal surface cleaning
T/GXAS 282-2022 Technical code of practice for treatment of heavy metal contaminated soil by wood fiber-based material

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pretreatment of heavy metals

GB/T 11373-2017 Thermal spraying—Pre-treatment of surfaces of metallic parts and components
GB/T 33163-2016 Metallic materials—Residual stress—With ultrasonic impact treatment

Taiwan Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

CNS 6227-1980 Pretreatment for Metals of Group I and Group II in Polluted Water and Waste Water

Shandong Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB37/T 4617-2023 Technical Guidelines for Ex-situ Treatment and Disposal of Heavy Metal Contaminated Sediment

HU-MSZT, Pretreatment of heavy metals

MSZ 19738-1968

ES-UNE, Pretreatment of heavy metals

UNE-EN 13507:2019 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
UNE-EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018)
UNE-EN ISO 2080:2022 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2022)
UNE-EN 4268:2012 Aerospace series - Metallic materials - Heat treatment facilities - General requirements (Endorsed by AENOR in November of 2012.)
UNE-CLC/TS 50625-5:2017 Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock (Endorsed by AENOR in November of 2007.)
UNE-EN 4383:2006 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock (Endorsed by AENOR in April of 2007.)

German Institute for Standardization, Pretreatment of heavy metals

DIN EN 13507:2018-10 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2018
DIN 17023:2000 Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order
DIN 17023:2000-03 Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order
DIN EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
DIN EN ISO 4885:2018-07 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018); German version EN ISO 4885:2018
DIN EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2010
DIN EN 13507:2018 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2018
DIN 17022-3:1989-04 Heat treatment of ferrous materials; heat treatment methods; case hardening
DIN EN ISO 11125-3:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997
DIN 17014-3:1976-05 Heat treatment of ferrous materials; notation to indicate heat treatment processes
DIN EN ISO 11126-8:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997
DIN EN ISO 11126-6:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997
DIN EN ISO 11125-2:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
DIN EN ISO 11127-5:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2011); German version EN ISO 11127-5:2011
DIN EN ISO 11127-2:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011); German version EN ISO 11127-2:2011
DIN EN ISO 11125-6:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997
DIN EN ISO 11127-3:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011); German version EN ISO 11127-3:2011
DIN 17022-5:2000-03 Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening
DIN 17022-2:1986-06 Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools
DIN EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
DIN EN ISO 2080:2022-06 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2022); German and English version EN ISO 2080:2022
DIN EN ISO 11127-7:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:2011); German version EN ISO 11127-7:2011
DIN EN ISO 11126-10:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004
DIN EN ISO 11127-4:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011); German version EN ISO 11127-4:2011
DIN 17022-4:1998-01 Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing
DIN EN ISO 11126-7:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999
DIN EN ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2011); German version EN ISO 11127-1:2011
DIN EN ISO 11125-5:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN IS
DIN EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011); German version
DIN EN ISO 11846:2008-08 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995); German version EN ISO 11846:2008
DIN EN ISO 2080:2020 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO/DIS 2080:2020); German and English version prEN ISO 2080:2020
DIN EN ISO 11125-7:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997
DIN EN 4268:2012-12 Aerospace series - Metallic materials - Heat treatment facilities - General requirements; German and English version EN 4268:2012
DIN EN 13887:2003-11 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding; German version prEN 13887:2003
DIN EN 4384:2007-10 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock; German and English version EN 4384:2007
DIN EN 4383:2007-04 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock; German and English version EN 4383:2006
DIN EN ISO 11125-4:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997
DIN EN 4318:2008 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section D<(Index)e> 100 mm, R<(Index)m> 960 MPa; German and English version EN 4318:2007

SAE - SAE International, Pretreatment of heavy metals

SAE AMS2821-2017 Salts@ Heat-Treating (For Metals)
SAE AMS3848/2A-1993 CLOTH@ NYLON@ METALLIZED Water Repellent Treated
SAE AMS-S-13165A-2007 Shot Peening of Metal Parts
SAE AMS3848/2B-1995 CLOTH@ NYLON@ METALLIZED WATER REPELLENT TREATED
SAE AMS3848/1B-1995 CLOTH@ NYLON@ METALLIZED UNTREATED

General Motors Corporation (GM), Pretreatment of heavy metals

GM 9984001-1993 Metal Surface Preparation Revision A
GM 9984263-2004 Metalized Finish for Lighting Applications Revision D

U.S. Military Regulations and Norms, Pretreatment of heavy metals

ARMY DOD-P-15328 D VALID NOTICE 1-1992 PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC)
ARMY DOD-P-15328 D (1)-1983 PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC)
ARMY DOD-P-15328 D-1978 PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC)
ARMY QPL-TT-C-490 NOTICE 1-2013 CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS)
ARMY TT-C-490 F (1)-2013 CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS)
ARMY MIL-F-47076 A-1990 FILM, POLYETHYLENE TEREPHTHALATE, METALLIZED
ARMY MIL-F-47299 A VALID NOTICE 1-1986 FAIRING, FRANGIBLE, AIRBORNE ROCKET LAUNCHER FOR 2.75 INCH ROCKET SYSTEM

Association Francaise de Normalisation, Pretreatment of heavy metals

NF A91-224:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying.
NF A91-224*NF EN 13507:2018 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
NF A91-410:1966 Surface treatment of metals. Anodizing (anodic oxydizing) of aluminium and its alloys. Continuity check.
NF A91-010:1984 Revêtements métalliques et traitements de surface des métaux - Terminologie - Classification - Symbolisation
NF A02-010*NF EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary
NF A91-404:1966 Surface treatment of metals. Anodizing (anodic oxydizing) of aluminium and its alloys. Measurement of thickness.
NF A91-411:1966 Surface treatment of metals. Anodisation (anodic oxidation) of aluminium and its alloys. Check of corrosion resistance.
NF EN 12487:2007 Protection contre la corrosion des métaux - Couches de conversion au chromate rincées et non rincées sur l'aluminium et les alliages d'aluminium
NF A91-401:1966 Surface treatment of metals. Anodisation (anodic oxidation) of aluminium and its alloys. Nomenclature of test methods.
NF A03-405:1991 Metal products - Fatigue testing - Data statistical processing
NF T35-508-9*NF EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9 : staurolite
NF EN ISO 2702:2022 Fixations - Vis à tôle traitées thermiquement - Caractéristiques mécaniques et physiques
NF A91-013*NF EN ISO 2080:2022 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
NF EN ISO 2080:2022 Revêtements métalliques et autres revêtements inorganiques - Traitement de surface, revêtements métalliques et autres revêtements inorganiques - Vocabulaire
NF T35-508-10:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10 : almandite garnet.
NF A91-402:1981 Surface treatments of metals. Anodic oxidation of aluminium and its alloys. Thickness measurements.
NF T35-509-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling.
NF A91-013:2009 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary.
NF A87-013-1*NF EN ISO 9692-1:2013 Welding and allied processes - Types of joint preparation - Part 1 : manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
NF P21-386*NF EN 15736:2009 Timber structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses
NF T35-508-6:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 6 : iron furnace slag.
NF T35-508-8:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 8 : olivine sand.
CLC/TS 50625-5:2017 Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals
NF T35-509-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Part 1 : sampling.
NF L10-038*NF EN 4268:2013 Aerospace series - Metallic materials - Heat treatment facilities - General requirements
NF EN 4268:2013 Série aérospatiale - Matériaux métalliques - Installations de traitement thermique - Exigences générales
NF T37-001-29:2010 Coil coated metals - Test methods - Part 29 : resistance to environmental soiling (dirt-pick-up and striping).

European Committee for Standardization (CEN), Pretreatment of heavy metals

EN 13507:2001 Thermal Spraying - Pre-Treatment of Surfaces of Metallic Parts and Components for Thermal Spraying
EN 13507:2018 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary
EN ISO 11125-3:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 3: Determination of Hardness
EN ISO 11127-5:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2020)
EN ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture
EN ISO 11127-2:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2020)
EN ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011)
EN ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary
EN 10052:1993 Vocabulary of Heat Treatment Terms for Ferrous Products
prEN 10052-1991 Vocabulary of heat treatment terms for ferrous products
EN ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2020)
EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011)
EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
EN ISO 2080:2022 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2022)
EN ISO 11127-7:2022 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2022)
EN ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides
EN 12508:2000 Corrosion Protection of Metals and Alloys - Surface Treatment, Metallic and Other Inorganic Coatings - Vocabulary
EN ISO 11125-1:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling
EN ISO 11127-4:2020 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)
EN ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test
EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2020)
EN ISO 11126-9:2004 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2011)
FprEN ISO 2080:2021 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO/FDIS 2080:2021)
EN ISO 2080:2009 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008)
EN 13523-29:2017 Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
EN ISO 11125-5:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 5: Determination of Percentage Defective Particles and of Microstucture ISO 11125-5: 1993

Danish Standards Foundation, Pretreatment of heavy metals

DS/EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
DS/EN 10052:1996 Vocabulary of heat treatment terms for ferrous products
DS 10601:1955 Heat treatment of metallic materials in solid state. Terminology and definitions
DS/EN ISO 2080:2009 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
DS/ISO 2079:1982 Surfacetreatment and metallic coatings. General classification of terms
DS/EN 4383:2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
DS/EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
DS/EN 4268:2012 Aerospace series - Metallic materials - Heat treatment facilities - General requirements
DS/EN ISO 11846:2008 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

Lithuanian Standards Office , Pretreatment of heavy metals

LST EN 13507-2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
LST EN 10052-2007 Vocabulary of heat treatment terms for ferrous products
LST EN ISO 2080:2009 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008)
LST EN 4384-2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
LST EN 4383-2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
LST EN 4268-2013 Aerospace series - Metallic materials - Heat treatment facilities - General requirements

AENOR, Pretreatment of heavy metals

UNE-EN 13507:2011 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
UNE-EN ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017)
UNE-EN ISO 2080:2010 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008)

Henan Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB41/T 1895-2019 Technical requirements for crane steel pretreatment
DB41/T 1698-2018 Guidelines for the implementation of safety standardization of dual prevention mechanisms for metal and nonmetal mines
DB41/T 869-2013 Specifications for management system specification for safety production risk pre-control of metal and non-metallic underground mining enterprises

工业和信息化部, Pretreatment of heavy metals

HG/T 5169-2017 Technical specifications for treating heavy metal wastewater using ion exchange technology
YB/T 4789-2019 Technical Specifications for the Treatment of Heavy Metal Wastewater from Iron Mine Mining and Processing Enterprises
YS/T 1189-2017 Chromium-free chemical pretreatment membrane for aluminum and aluminum alloys
YB/T 6000-2022 Technical specifications for wastewater treatment in electrolytic manganese metal enterprises

British Standards Institution (BSI), Pretreatment of heavy metals

BS EN 13507:2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 13507:2018 Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS ISO 9587:2007 Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
BS EN ISO 4885:2017 Ferrous materials. Heat treatments. Vocabulary
BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
BS EN ISO 11124-4:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
BS EN ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Staurolite
BS EN 10052:1994(1999) Vocabulary of heat treatment terms for ferrous products
BS EN ISO 11126-8:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Olivine sand
BS EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast cleaning abrasives. Sampling
BS EN ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine
BS EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
BS EN ISO 11125-7:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
BS EN ISO 11125-3:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
BS EN ISO 11126-6:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Iron furnace slag
BS EN ISO 11126-4:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Coal furnace slag
BS EN ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Almandite garnet
BS EN 12508:2000 Corrosion Protection of Metals and Alloys - Surface Treatment, Metallic and Other Inorganic Coatings - Vocabulary
BS EN ISO 11126-1:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
BS EN ISO 11126-3:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Copper refinery slag
BS EN ISO 11126-10:2004(2005)*BS 7079-F10:2004 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
BS EN ISO 2080:2008 Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
BS ISO 2080:2008 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
BS EN ISO 2080:2009 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
BS EN ISO 11125-6:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
BS EN ISO 11125-2:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
BS EN ISO 11126-5:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Nickel refinery slag
BS EN ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
BS EN ISO 11125-1:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
BS EN ISO 11124-3:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit
BS EN ISO 11125-4:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
BS EN ISO 11127-5:1994 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of moisture
BS EN ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture
BS EN ISO 11125-4:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
BS EN ISO 11127-5:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture
BS EN 2829:1995 Adhesion test for metallic coatings by shot peening
BS EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
BS EN ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
BS EN ISO 11846:1996 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys
20/30379100 DC BS EN ISO 2080. Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
BS EN ISO 2080:2022 Tracked Changes. Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
BS EN ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
BS ISO 11125-9:2021 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Wear testing and performance
BS EN ISO 11127-2:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
BS EN ISO 11127-7:1994 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble chlorides
BS EN ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble chlorides
BS EN 12373-7:2002 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
BS EN ISO 2082:2009 Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
BS EN ISO 2082:2008 Metallic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel
BS EN 4268:2012 Aerospace series. Metallic materials. Heat treatment facilities. General requirements
BS EN ISO 11846:2008 Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys

IN-BIS, Pretreatment of heavy metals

Indonesia Standards, Pretreatment of heavy metals

SNI 07-1340-1989 Glossary of terms for heat treatment process of metals
SNI 07-3626-1994 Terms of definition related to heat treatment of metals
SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers

IPC - Association Connecting Electronics Industries, Pretreatment of heavy metals

IPC TM-650 2.4.15A-1976 Surface Finish@ Metal Foil

Hunan Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB43/T 970-2014 Engineering technical specification for electrochemical advanced treatment of heavy metal wastewater
DB43/T 2191-2021 Heavy metal pollution in agricultural land soils Technical specifications for evaluation of remediation and treatment effects of heavy metal pollution in agricultural land soils Technical specifications for evaluation of remediation and treatment effects

Society of Automotive Engineers (SAE), Pretreatment of heavy metals

SAE AMS-M-3171-1998 Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on
SAE AMS2821-2021 Salts, Heat-Treating (For Metals)
SAE AMS3848/1B-1986 Cloth, Nylon, Metallized, Untreated
SAE AMS-M-3171-2018 Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on
SAE AMS-M-3171A-2022 Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on
SAE AMS3848/2-1995 CLOTH, NYLON, METALLIZED Water Repellent Treated
SAE AMS3848/2B-1986 Cloth, Nylon, Metallized, Water Repellent Treated
SAE AMS3848/1-1995 CLOTH, NYLON, METALLIZED Untreated
SAE AMS4281F-2006 Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated
SAE AMS4281G-2014 Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated

YU-JUS, Pretreatment of heavy metals

JUS C.A2.055-1995 Heat treatment of ferrous metals - Forms which use as order for heat-treatment
JUS C.A0.010-1982 Heat treatment of metal. Type of heat treatment Terms and definitions

Professional Standard - Aviation, Pretreatment of heavy metals

HB 5118-1978 Terminology for Heat Treatment of Metals and Alloys
HB/Z 262-1994 Specification for sampling of specimens for chemical analysis in salt baths for metal heat treatment

PT-IPQ, Pretreatment of heavy metals

NP 1697-1980

Japanese Industrial Standards Committee (JISC), Pretreatment of heavy metals

JIS Z 0311:1996 Metallic blast-cleaning abrasives
JIS Z 0312:1996 Non-metallic blast-cleaning abrasives
JIS B 6905:1995 Heat treatment for metal products -- Vocabulary
JIS Z 0304:1974 Outdoor exposure test for protected metals
JIS K 6848-2:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 2: Guidelines for the surface preparation of metals
JIS W 1112:1984 Shot peening of metal parts for aircraft
JIS B 6901:1998 Heat treatment furnaces of metals -- Test methods of effective working zone and effective treating zone

Korean Agency for Technology and Standards (KATS), Pretreatment of heavy metals

KS D ISO 9587-2012(2022) Metallic and other inorganic coatings－Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
KS D ISO 9587-2012(2017) Metallic and other inorganic coatings－Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
KS B 0552-1996 Heat treatment for metal products-Vocabulary
KS B 0552-1996(2016) Heat treatment for metal products-Vocabulary
KS B 0552-1996(2021) Heat treatment for metal products-Vocabulary
KS D ISO 9587:2012 Metallic and other inorganic coatings－Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
KS W 2025-2003(2008) DEFINITIONS AND OPERATIONS OF DISSIMILAR METALS IN AIRCRAFT
KS W 2025-1979 DEFINITIONS AND OPERATIONS OF DISSIMILAR METALS IN AIRCRAFT
KS W 2017-2008 Surface treatments and inorganic coatings for metal surfaces of aircrafts systems
KS W 2017-1983 Surface treatments and inorganic coatings for metal surfaces of aircrafts systems
KS D ISO 2079:2004 Surface treatment and metallic coatings-General classification of terms
KS D ISO 2079-2015(2020) Surface treatment and metallic coatings－General classification of terms
KS D ISO 3134-5:2002 Light metals and their alloys-Terms and definitions-Part 5 : Methods of processing and treatment
KS D ISO 3134-5-2002(2012) Light metals and their alloys－Terms and definitions－Part 5 : Methods of processing and treatment
KS D ISO 3134-5:2013 Light metals and their alloys－Terms and definitions－Part 5 : Methods of processing and treatment
KS M ISO 17212:2010 Structural adhesives-Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
KS M ISO 17212:2013 Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
KS D ISO 11846:2021 Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
KS D ISO 11846:2017 Corrosion of metals and alloys－Determination of resistance to intergranular corrosion of solution heat－treatable aluminium alloys

The Society for Protective Coatings (SSPC), Pretreatment of heavy metals

SSPC SP 12-2002 Surface Preparation and Cleaning of Cleaning of Metals by Waterjetting Prior to Recoating NACE NO. 5: 2002

IT-UNI, Pretreatment of heavy metals

UNI 7359-1974
UNI 4528-1960
UNI 4179-1959
UNI 7358-1974
UNI 4719-1961
UNI 4718-1961
UNI 4238-1959
UNI 6923-1971
UNI 4195-1959
UNI 4241-1959
UNI 4524-1960
UNI 6926-1971 Aircraft metallic materials. Hardening and tempering alloyed steel (C 0,40%, Ni 1,80%, Cr 0,80% and Mo 0,25%).
UNI 6930-1971
UNI 6924-1971
UNI 6925-1971 Aircraft metallic materials. Hardening and tempering alloyed steel (C 0,35%, Ni 3,75%, Cr 1,75% and Mo 0,35%).

GM Global, Pretreatment of heavy metals

GMW 16546-2011 Effect of Metal Lubricants on Paint Pretreatment Issue 1; English

CZ-CSN, Pretreatment of heavy metals

CSN ON 73 6719-1964 WASTES treatment of metal finishing
CSN 83 0809-1976 Waste-water treatment of metal finishing
CSN 83 0771-1964 Quality of industrial water for surfaee treatment of metals
CSN 01 4061-1990 Metal finishing of threads by electrodeposited coatings
CSN 42 0056-1993 Heat treatment of nonferrous metals. Classification, terminology and definitions
CSN 01 4060-1990 Metal finishing of threads by protective coatings. General requirements
CSN 06 3006-1992 Classification of the fuel industrial furnaces for heating and heat treatment of metals
CSN ISO 2079:1994 Surface treatment and metallic coatings. General classification of terms
CSN 06 3010-1995 Thermal balances of fuel industrial furnaces for heating and heat treatment of metals

TR-TSE, Pretreatment of heavy metals

TS 1112-1973 CLOSSARY OF TERMS FOR THE HEAT TREATMENT OF METALLIC MATERIALS

Anhui Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB34/T 1239-2010 Phosphating agent for metal surface treatment

国家市场监督管理总局、中国国家标准化管理委员会, Pretreatment of heavy metals

GB/T 38224.2-2019 Evaluation on heavy metal wastewater treatment and reuse technology—Part 2: Indicator system
GB/T 38224.1-2019 Evaluation on heavy metal wastewater treatment and reuse technology—Part 1: Procedure and approach
GB/T 39247-2020 Additive manufacturing—Specification for heat treatment process of metal parts
GB/T 41058-2021 Methods for detecting heavy metals in sludge and contaminated soil for cement kiln coprocessing

American Society for Testing and Materials (ASTM), Pretreatment of heavy metals

ASTM D5723-95 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D5723-95(2010) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D5723-95(2002) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D5723-95(2019) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM E44-84e1 Definitions of Terms Relating to Heat Treatment of Metals
ASTM D6906-03 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D6906-03(2010)e1 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D6906-11 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D5723-95(2015) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM E1266-88(2005) Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM E1266-88(1999) Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM D1732-03 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
ASTM D1732-03(2008) Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
ASTM D1732-03(2013) Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
ASTM A919-84(1993)e1 Terminology Relating to Heat Treatment of Metals (Withdrawn 1999)
ASTM D763-01 Standard Specification for Raw and Burnt Umber Pigments
ASTM D763-81(1995) Standard Specification for Raw and Burnt Umber Pigments
ASTM D7639-10 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D7639-22 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D1730-03 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D1730-09(2014) Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D6906-11a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12a(2016) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D7639-10(2014) Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D7639-10(2018) Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D6906-12a(2021) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D1730-09 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D2651-01(2008) Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM B874-96(2013) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
ASTM E1266-12 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM E1307-00 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
ASTM E1307-18 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

RU-GOST R, Pretreatment of heavy metals

GOST 2999-1975 Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 12.3.004-1975 Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 33439-2015 Metal products, ferrous metals and alloys on iron-nickel and nickel-based. Heat treatment terms and definitions
GOST R 57410-2017 Corrosion protection of metal wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements to flow process

Heilongjiang Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB23/T 3625.1-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 1: General Principles
DB23/T 3625.6-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 6: Ore Concentration Plant
DB23/T 3625.4-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 4: Tailings Pond
DB23/T 3625.2-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 2: Underground Mines
DB23/T 3625.3-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 3: Open-pit Mines
DB23/T 1450-2011 Specifications for the construction of major hazard monitoring and early warning systems for metal and nonmetal underground mines and tailings ponds
DB23/T 3625.7-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 7: Extraction and Construction Units
DB23/T 3625.8-2023 Assessment Guidelines for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 8: Geological Exploration Units
DB23/T 3625.5-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 5: Small Open-pit Quarry

VN-TCVN, Pretreatment of heavy metals

TCVN 2294-1978 Heat treatment of metals.General safety requirements

AR-IRAM, Pretreatment of heavy metals

IRAM 540-1953

SSPC - The Society for Protective Coatings, Pretreatment of heavy metals

SP 12-2002 Surface Preparation and Cleaning of Cleaning of Metals by Waterjetting Prior to Recoating (NACE NO. 5: 2002)
SP 10-1999 Joint Surface Preparation Standard Near-White Metal Blast Cleaning (NACE No. 2: 1999)
SP 5-1999 Joint Surface Preparation Standard White Metal Blast Cleaning (NACE No. 1: 1999)
SP 5-1994 Joint Surface Preparation Standard White Metal Blast Cleaning (NACE No. 1: 1994)

CEN - European Committee for Standardization, Pretreatment of heavy metals

EN ISO 11125-3:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness
EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
EN ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products - Specifications for nonmetallic blast-cleaning abrasives - Part 5: Nickel slag
EN ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products - Specifications for nonmetallic blast-cleaning abrasives - Part 6: Iron and steel slags
EN ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine
EN ISO 11125-5:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure
EN 4268:2012 Aerospace series - Metallic materials - Heat treatment facilities - General requirements

American National Standards Institute （ANSI), Pretreatment of heavy metals

ANSI/NFPA 122-2010 Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
ANSI/ASSE Z590.3-2011 Prevention through Design: Guidelines for Addressing Occupational Risks in Design and Redesign Processes

Professional Standard - Ocean, Pretreatment of heavy metals

HY/T 132-2010 Pretreatment guideline of heavy metals analysis in the marine sediments and organisms-Microwave assisted acid digestion

Professional Standard - Light Industry, Pretreatment of heavy metals

QB/T 5234-2018 Precious metal adornment.Recycling and treatment technical specifications

GM North America, Pretreatment of heavy metals

GM GMN3936-2000 Paint Shop Sheet Metal Handling Glove
GM GM6255M-1989 Protective Finish for Metal Drain Hole Plug Assemblies

International Federation of Trucks and Engines, Pretreatment of heavy metals

NAVISTAR CEMS A-39-2001 Shot Peening of Metal Parts (Includes Appendix)

Institute of Electrical and Electronics Engineers (IEEE), Pretreatment of heavy metals

NFPA (Fire) 485 Storage, Handling, Processing, and Use of Lithium Metal

Professional Standard - Agriculture, Pretreatment of heavy metals

GB/T 1238-1976 Metal coating and chemical treatment representation method

Shanghai Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB31/T 707-2013 Test method of heavy metals and brominated flame retardants in wastewater from recycling, recovery and treatment industry of waste electrical and electronic equipment
DB31/ 642-2012 Energy Consumption Quota for Metal Heat Treatment Processes
DB31/ 928-2015 Norm of energy consumption per unit product of vacuum heat treated metals
DB31/T 1213-2020 Energy consumption limit per unit product in metal heat treatment and tempering process
DB31/ 642-2020 Energy consumption quota per unit product for metal heat treatment process

RO-ASRO, Pretreatment of heavy metals

STAS SR EN 10052-1996 Vocabulary of heat treatment terms for ferrous products

Professional Standard - Electron, Pretreatment of heavy metals

SJ 20818-2002 Metal plating and chemical treatment for electronic equipment
SJ 1283-1977 Test methods for corrosion of metallic coatings and chemically treated layers
SJ 1281-1977 Test methods for thickness of metallic coatings and chemically treated layers
SJ 1278-1977 Inspection methods appearance of metallic coatings and chemically treated layers
SJ 1276-1977 Techical requirements for quality inspection of metallic coatings and chemically treated layers
SJ 1277-1977 Quality inspection rules for the acceptance of metallic coatings and chemically treated layers

BE-NBN, Pretreatment of heavy metals

NBN-EN 10052-1994 vocabulary of heat treatment terms for ferrous procucts

Canadian General Standards Board （CGSB), Pretreatment of heavy metals

CGSB 31-GP-107MA-1990 Non-Inhibited Phosphoric Acid Base Metal Conditioner and Rust Remover

PL-PKN, Pretreatment of heavy metals

PN-EN ISO 4885-2018-05 P Ferrous materials -- Heat treatments -- Vocabulary (ISO 4885:2018)

Professional Standard - Machinery, Pretreatment of heavy metals

JB/T 5190.1-1991 Surface treatment metal coating and chemical treatment representation method of photomechanical parts
JB/T 6141.1-1992 Heavy-duty gears Metallographic examination of carburized layer after spheroidizing treatment
JB/T 10863-2018 Solid waste treatment equipment Non-ferrous metal eddy current separator

GM Holden Ltd, Pretreatment of heavy metals

HOLDEN HN 1668-1996 Powder Coat Finish for Exterior Body Hardware Parts

SE-SIS, Pretreatment of heavy metals

SIS SS-ISO 2079:1984 Surface treatment and meta I lic coat- ings - General classification of terms

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Pretreatment of heavy metals

GJB/Z 18A-2005 Data reduction and presentation of mechanical property for metallic materials

ES-AENOR, Pretreatment of heavy metals

UNE 112-023-1994 Surface treatment and metallic coatings. General classification of terms

工业和信息化部/国家能源局, Pretreatment of heavy metals

JB/T 12854-2016 Technical conditions for zirconium oxide conversion treatment on metal surfaces

Military Standard of the People's Republic of China-General Armament Department, Pretreatment of heavy metals

GJB/Z 18A-2020 Data processing and expression of mechanical properties of metal materials

未注明发布机构, Pretreatment of heavy metals

DIN EN 12329:2000 Corrosion protection of metals – Galvanic zinc coatings on ferrous materials with additional treatment

National Association of Corrosion Engineers (NACE), Pretreatment of heavy metals

NACE NO.1-1994 Joint Surface Preparation Standard White Metal Blast Cleaning (Item No. 21065)
NACE NO. 1-2004 Joint Surface Preparation Standard White Metal Blast Cleaning Item No. 21065
NACE NO.2-1994 Joint Surface Preparation Standard Near-White Metal Blast Cleaning (Item No. 21066; SSPC-SP 10)

CH-SNV, Pretreatment of heavy metals

SN 058 202-1978

Sichuan Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB51/T 1910-2014 Sample pretreatment specification for determination of trace heavy metals in forest food and its environment by atomic absorption method

Guangdong Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB44/T 2271-2021 Technical Guidelines for Passivation and Conditioning of Heavy Metal Pollution in Cultivated Land Soil

Association of German Mechanical Engineers, Pretreatment of heavy metals

VDI/VDE 2420 Blatt 6-1981 Metal surface treatment in precision engineering; non-metallic coatings I; chemical and electrochemical procedures

(U.S.) Ford Automotive Standards, Pretreatment of heavy metals

FORD WA976-2002 Dimensional, Material and Physical Properties of All Metal Prevailing Torque Bolts

IX-UIC, Pretreatment of heavy metals

UIC 842-3-1979 Technical conditions for surface treatment of metallic and non-metallic materials used in rolling stock and container manufacturing

KR-KS, Pretreatment of heavy metals

KS D ISO 11846-2017 Corrosion of metals and alloys－Determination of resistance to intergranular corrosion of solution heat－treatable aluminium alloys
KS D ISO 11846-2021 Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

Inner Mongolia Provincial Standard of the People's Republic of China, Pretreatment of heavy metals

DB15/T 2428-2021 Technical Guidelines for Dust Control and Heavy Metal Ion Disposal of Steel Slag Aggregates for Highway

Defense Logistics Agency, Pretreatment of heavy metals

DLA SMD-5962-87735 REV B-1998 MICROCIRCUIT,CMOS, MICROPROCESSOR OPTIMIZED FOR DIGITAL SIGNAL PROCESSING, MONOLITHIC SILICON
DLA SMD-5962-90727 REV A-1993 MICROCIRCUIT, DIGITAL CMOS GRAPHIC SYSTEM PROCESSOR, MONOLITHIC SILICON

European Association of Aerospace Industries, Pretreatment of heavy metals

AECMA PREN 4383-1997 Aerospace Series Heat Resisting Alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) Non Heat Treated Remelting Stock Edition P 1
AECMA PREN 4384-1997 Aerospace Series Heat Resisting Alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Non Heat Treated Remelting Stock Edition P 1