ZH
RU
ES
anisotropy
anisotropy, Total:93 items.
In the international standard classification, anisotropy involves: Products of non-ferrous metals, Electronic component assemblies, Iron and steel products, Bridge construction, Inorganic chemicals, Reinforced plastics, Plastics, Geology. Meteorology. Hydrology, Medical equipment, Water quality, Mining equipment.
IX-SA, anisotropy
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, anisotropy
- GB/T 41967-2022 Anisotropic neodymium iron boron permanent magnetic powder
- GB/T 1040.4-2006 Plastics. Determination of tensile properties. Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
PL-PKN, anisotropy
AASHTO - American Association of State Highway and Transportation Officials, anisotropy
Institute of Interconnecting and Packaging Electronic Circuits (IPC), anisotropy
- IPC 3408-1996 General Requirements for Anisotropically Conductive Adhesive Films
IPC - Association Connecting Electronics Industries, anisotropy
- IPC 3408 CD-1996 General Requirements for Anisotropically Conductive Adhesive Films
RU-GOST R, anisotropy
ESDU - Engineering Sciences Data Unit, anisotropy
- ESDU 80023 A-1995 Buckling of rectangular specially orthotropic plates.
- ESDU 94005-1994 Buckling of flat rectangular orthotropic plates.
- ESDU 83036 B-1992 Natural frequencies of rectangular@ specially orthotropic laminated plates.
- ESDU 83036 B-2012 Natural frequencies of rectangular@ specially orthotropic laminated plates
- ESDU 83036 B-2011 Natural frequencies of rectangular@ specially orthotropic laminated plates
- ESDU 81047 C-1994 Buckling of flat rectangular plates (isotropic@ orthotropic and laminated composite plates and sandwich panels).
- ESDU 90016 B-2011 Natural frequencies of isotropic and orthotropic rectangular plates under static in-plane loading (including shear loading)
- ESDU 88032 A-1991 Wrinkling of sandwich panel face plates (isotropic face plates on orthotropic cores@ in-plane loading or bending).
- ESDU 02009-2011 Sound radiation from orthotropic rectangular plates Part I: Estimation by asymptotic method
- ESDU 90016 B-1993 Natural frequencies of isotropic and orthotropic rectangular plates under static in-plane loading (including shear loading).
- ESDU 02009-2002 Sound radiation from orthotropic rectangular plates. Part I: estimation by asymptotic method.
- TM 71-1990 A Rayleigh-Ritz method of analysis for vibration of orthotropic plates under static in-plane loading (including shear)
- ESDU 93011-1994 Flat rectangular orthotropic plates under uniformly distributed normal pressure. Elastic stresses and deflections for various forms of edge restraint.
- ESDU 67024 C-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges simply-supported.)
- ESDU 68030 B-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges clamped.)
- ESDU 73007 A-1983 Stiffness of loaded flat strips under sinusoidally distributed bending couples at their edges (for use in local buckling calculations). (Uniaxial or biaxial loading. Isotropic or orthotropic materials.)
- ESDU 02010-2002 Sound radiation from orthotropic rectangular plates. Part II: validation by comparison with numerical and experimental results.
- ESDU 85001 D-1995 Elastic stress and strain distributions around circular holes in infinite plates of orthotropic material (applicable to fibre reinforced composites).
- ESDU 67025 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges simply-supported.)
Group Standards of the People's Republic of China, anisotropy
- T/SBX 040-2020 Determination of Optical Anisotropy of Nematic Thermotropic Liquid Crystals
- T/CHTS 20016-2021 Anisotropic Friction Pendulum Seismic Isolation Bearing for Highway Bridges
CZ-CSN, anisotropy
- CSN 42 0409-1970 Testing of anizotropy of aluminium and aluminium alloy sheets (cup method)
- CSN 42 6314-1988 Cold rolled anisotropic steel sheat and strip for electrical engineering. Dimensions
- CSN 42 6341-1988 Cold rolled anisotropic steel sheat and strip for electrical engineering. Dimensions
- CSN 42 0231-1988 Cold rolled anisotropic steel sheet and strip for electrical engineering. Technical delivery requirements
German Institute for Standardization, anisotropy
- DIN 51937:1994 Testing of carbon materials; determination of anisotropy degree; solid materials
- DIN 51937:1994-07 Testing of carbon materials; determination of anisotropy degree; solid materials
- DIN EN ISO 527-4:2023-07 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023); German version EN ISO 527-4:2023
- DIN EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021)
- DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
- DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
- DIN EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
ES-AENOR, anisotropy
Professional Standard - Energy, anisotropy
- NB/T 10842-2021 Measuring method of shale stress direction Viscous remanence-wave velocity anisotropy
Danish Standards Foundation, anisotropy
- DS/EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- DS/EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
Association Francaise de Normalisation, anisotropy
- NF T51-034-4*NF EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- NF EN ISO 527-4:2023 Plastiques - Détermination des propriétés en traction - Partie 4 : conditions d'essai pour les composites plastiques renforcés de fibres isotropes et orthotropes
- NF T51-034-4:1997 Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.
- NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
- NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
- NF T51-294-5*NF EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5 : preparation of standard specimens for investigating anisotropy
- NF EN 13421:2006 Plastiques - Compositions de moulage thermodurs - Composites et fibres de renfort - Préparation des éprouvettes pour déterminer l'anisotropie des propriétés des composites de moulage par compression
Standard Association of Australia （SAA）, anisotropy
- AS 1145.4:2001 Determination of tensile properties of plastics materials - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
WRC - Welding Research Council, anisotropy
- BULLETIN 40-1958 DESIGN OF A THIN-WALLED CYLINDRICAL PRESSURE VESSEL BASED UPON THE PLASTIC RANGE AND CONSIDERING ANISOTROPHY
American Welding Society (AWS), anisotropy
- WRC 040:1958 Design of a Thin-Walled Cylindrical Pressure Vessel Based Upon The Plastic Range and Considering Anisotropy
British Standards Institution (BSI), anisotropy
- BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
- BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
- BS EN ISO 527-4:2023 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- 20/30409900 DC BS EN ISO 527-4. Plastics. Determination of tensile properties. Part 4. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- BS PD ISO/TR 16379:2014 Tissue-engineered medical products. Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
- PD ISO/TR 16379:2014 Tissue-engineered medical products. Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
- BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
VN-TCVN, anisotropy
- TCVN 4501-4-2009 Plastics.Determination of tensile properties.Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
IX-UIC, anisotropy
- UIC R 778-1-2011 Recommendations for the consideration of fatigue in the design of steel railway bridges, especially with orthotropic decks
AENOR, anisotropy
- UNE-EN ISO 527-4:1997 PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES (ISO 527-4:1997).
- UNE-EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)
- UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
American Society for Testing and Materials (ASTM), anisotropy
- ASTM D5920-96 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
- ASTM D5920-96(2005) Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
- ASTM D5920/D5920M-20 Standard Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method
- ASTM D5850-20 Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
- ASTM D5850-18 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
- ASTM D5850-95(2000) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
- ASTM D5850-95(2006) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
- ASTM D5850-95(2012) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ES-UNE, anisotropy
- UNE-EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02)
- UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
European Committee for Standardization (CEN), anisotropy
- EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
- FprCEN/TS 1993-1-901 CEN/TS 1993-1-901 Eurocode 3 — Design of steel structures — Part 1-901: Fatigue design of orthotropic bridge decks with the hot spot stress method
International Organization for Standardization (ISO), anisotropy
- ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- ISO/TR 16379:2014 Tissue-engineered medical products - Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
- ISO 294-5:2001/Cor 1:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Technical Corrigendum 1
- ISO 294-5:2001/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Amendment 1
The American Road & Transportation Builders Association, anisotropy
- AASHTO DIVISION I 10.41 Orthotropic-Deck Superstructures Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)
国家市场监督管理总局、中国国家标准化管理委员会, anisotropy
- GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
未注明发布机构, anisotropy
- BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
Lithuanian Standards Office , anisotropy
- LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites