ZH
RU
ES
When the gas phase is at constant temperature
When the gas phase is at constant temperature, Total:134 items.
In the international standard classification, When the gas phase is at constant temperature involves: Air quality, Domestic, commercial and industrial heating appliances, Burners. Boilers, Thermodynamics and temperature measurements, Petroleum, petroleum products and natural gas handling equipment, Automatic controls for household use, TESTING, General methods of tests and analysis for food products, Analytical chemistry, Refractories, Heat pumps, Aerospace electric equipment and systems, Test conditions and procedures in general, Electrical engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Medical equipment, Fluid storage devices, Geology. Meteorology. Hydrology, Natural gas, Materials for aerospace construction, Motor cycles and mopeds, Protection against electric shock, Fuels, Miscellaneous domestic and commercial equipment, Environmental protection, Installations in buildings, Equipment for entertainment, Construction materials, Petroleum products in general, Fasteners for aerospace construction, Ceramics, Protection of and in buildings, Refrigerating technology.
Group Standards of the People's Republic of China, When the gas phase is at constant temperature
- T/QGCML 1739-2023 Constant temperature and humidity air treatment equipment
- T/CAIA SH009-2017 Real-Time Simultaneous Amplification and Testing (SAT) method for detecting Salmonella spp in foods
- T/CAIA SH007-2017 Real-time fluorescent nucleic acid constant temperature amplification of food Vibrio parahaemolyticus
- T/CAIA SH008-2017 Real-Time Simultaneous Amplification and Testing (SAT) method for detecting S.aureus in foods?
- T/GDC 203-2022 Specification for installation of household air source swimming pool constant temperature heat pump
- T/SCDA 126-2023 Application technical standard of HF fumed silica thermal insulation material for external wall and internal thermal insulation system
American National Standards Institute （ANSI), When the gas phase is at constant temperature
Standard Association of Australia （SAA）, When the gas phase is at constant temperature
- AS 4619:2004 Gas appliance thermostats
- AS 1774.12:2001 Refractories and refractory materials - Physical test methods - Refractoriness under load - Temperatures of deformation at constant load with rising temperature
Canadian Standards Association (CSA), When the gas phase is at constant temperature
Association Francaise de Normalisation, When the gas phase is at constant temperature
- NF EN 257:2022 Thermostats mécaniques pour appareils à gaz
- NF D36-500*NF EN 257:2011 Mechanical thermostats for gas-burning appliances
- NF D36-500:1992 Mechanical thermostats for gas-burning appliances.
- NF C47-121:1987 Automatic electrical controls for household use - Chrono proportional thermostats - All or nothing thermostats to be incorporated in fixed room heaters - Performance specifications
- FD X15-140:2013 Mesure de l'humidité de l'air - Enceintes climatiques et thermostatiques - Caractérisation et vérification
- NF X15-140:2002 Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification
- NF M41-002:2008 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method.
- NF M41-002*NF EN 15470:2017 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
- NF EN 15470:2017 Gaz de pétrole liquéfié - Détermination des résidus dissous - Méthode par chromatographie en phase gazeuse, à haute température
- NF X30-369*NF ISO 14080:2018 Greenhouse gas management and related activities - Framework and principles for methodologies on climate actions
- NF B43-356:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude.
- NF E86-505-1:1998 Cryogenic vessels. Gas/material compatibility. Part 1 : oxygen compatibility.
CZ-CSN, When the gas phase is at constant temperature
- CSN 36 1972-1961 Electric dilatation instantaneous thermostats for electric baking ovens
- CSN EN 257-1994 Mechanical thermostats for gas-burning appliances
- CSN 36 1971-1961 Electric dilatation instantaneous thermostats for electric storage water heaters
BE-NBN, When the gas phase is at constant temperature
European Committee for Standardization (CEN), When the gas phase is at constant temperature
- EN 257:2010 Mechanical thermostats for gas-burning appliances
- EN 257:2022 Mechanical thermostats for gas-burning appliances
- EN 257:1992 Mechanical Thermostats for Gas-Burning Appliances Includes Amendment A1 : 1996
- EN ISO 6974-5:2014 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen@ carbon dioxide@ C1 to C5 hydrocarbons and C6+ hydrocarbons
- EN 15470:2007 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
- EN 15470:2017 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
- EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
Danish Standards Foundation, When the gas phase is at constant temperature
- DS/EN 257:1993 Mechanical thermostats for gas-burning appliances
- DS/EN 257:2010 Mechanical thermostats for gas-burning appliances
- DS/EN 15470:2008 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
British Standards Institution (BSI), When the gas phase is at constant temperature
- BS EN 257:1992 Mechanical thermostats for gas-burning appliances
- BS EN 257:2010 Mechanical thermostats for gas-burning appliances
- 20/30401719 DC BS EN 257. Mechanical thermostats for gas-burning appliances
- BS EN 257:2022 Tracked Changes. Mechanical thermostats for gas-burning appliances
- BS ISO 3384-1:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature
- BS ISO 23551-9:2015 Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Mechanical gas thermostats
- BS ISO 23551-9:2022 Tracked Changes. Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Part 9: Mechanical gas thermostats
- BS EN 15470:2007 Liquefied petroleum gases - Determination of dissolved residues - High temperature gas chromatographic method
- 20/30401694 DC BS ISO 23551-9. Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Part 9. Mechanical gas thermostats
- 21/30436333 DC BS ISO 23551-9. Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Part 9. Mechanical gas thermostats
- BS 7909:2008 Code of practice for
temporary electrical
systems for entertainment
and related purposes
- BS 7909:2011 Code of practice for temporary electrical systems for entertainment and related purposes
- BS EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- 22/30440324 DC BS 7909. Temporary electrical systems for entertainment and related purposes. Code of practice
- 23/30414224 DC BS ISO 14068. Greenhouse gas management and climate change management and related activities — Carbon neutrality
- BS EN 15470:2017 Tracked Changes. Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method
AT-ON, When the gas phase is at constant temperature
NL-NEN, When the gas phase is at constant temperature
Lithuanian Standards Office , When the gas phase is at constant temperature
- LST EN 257-2010 Mechanical thermostats for gas-burning appliances
- LST EN 15470-2008 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
AENOR, When the gas phase is at constant temperature
- UNE-EN 257:2010 Mechanical thermostats for gas-burning appliances
- UNE-EN 1797:2002 Cryogenic vessels- Gas/material compatibility.
- UNE-EN 15470:2017 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
German Institute for Standardization, When the gas phase is at constant temperature
- DIN EN 257:2020 Mechanical thermostats for gas-burning appliances; German and English version prEN 257:2020
- DIN EN 257:2010-11 Mechanical thermostats for gas-burning appliances; German version EN 257:2010 / Note: To be replaced by DIN EN 257 (2020-06).
- DIN EN 257:2020-06 Mechanical thermostats for gas-burning appliances; German and English version prEN 257:2020 / Note: Date of issue 2020-05-08*Intended as replacement for DIN EN 257 (2010-11).
- DIN 12880:2007 Electrical laboratory devices - Heating ovens and incubators
- DIN EN 15470:2017-09 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method; German version EN 15470:2017
- DIN EN 15470:2008 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method; English version of DIN EN 15470:2008-02
- DIN EN ISO 6974-5:2014-10 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C<(Index)1> to C<(Index)5> hydrocarbons and C<(Index)6+> hydrocarbons (ISO 6974-5:20...
Professional Standard - Environmental Protection, When the gas phase is at constant temperature
- HJ/T 376-2007 Technical requirement and test procedures for 24 hour thermostatic automatic continuous ambient air sampler
NEMA - National Electrical Manufacturers Association, When the gas phase is at constant temperature
- NEMA DC 3-2008 Residential Controls–Electrical Wall-Mounted Room Thermostats
- NEMA DC 3-1989 Residential Controls - Electrical Wall- Mounted Room Thermostats
National Electrical Manufacturers Association（NEMA), When the gas phase is at constant temperature
- NEMA DC 3-2013 Residential Controls-Electrical Wall-Mounted Room Thermostats
- NEMA DC 3-2003 Residential Controls朎lectrical Wall-Mounted Room Thermostats
Defense Logistics Agency, When the gas phase is at constant temperature
- DLA MIL-DTL-28827/1 C-2011 SWITCH, THERMOSTATIC (VOLATILE LIQUID), HERMETIC SEALED, SINGLE POLE DOUBLE THROW (SPDT), MEDIUM RESPONSE TIME
- DLA QPL-28827-8 NOTICE 1-2008 Switches, Thermostatic (Volatile Liquid), Hermetically Sealed, General Specification for
- DLA QPL-28827-QPD-2010 Switches, Thermostatic, (Volatile Liquid), Hermetically Sealed, General Specification for
- DLA QPL-28827-2011 Switches, Thermostatic, (Volatile Liquid), Hermetically Sealed, General Specification for
Society of Automotive Engineers (SAE), When the gas phase is at constant temperature
- SAE AS4851A-2005 Relative Thermal Life and Temperature Index for Insulated Electric Wire
- SAE AMS5337D-2007 Steel, Maraging, Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated UNS J93150
RU-GOST R, When the gas phase is at constant temperature
- GOST R EN 257-2004 Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods
- GOST 8.188-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to
- GOST R 50267.20-1997 Medical electrical equipment. Part 2. Particular requirements for safety of transport incubators
- GOST R 50267.19-1996 Medical electrical equipment. Part 2. Particular requirements for safety of baby incubators
- GOST R ISO 14080-2021 Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions
- GOST R 53994.2.7-2010 Automatic electrical controls for household and similar use. Part 2.7. Particular requirements for timers and time switchers
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, When the gas phase is at constant temperature
- JEDEC JESD202-2006 Method for Characterizing the Electromigration Failure Time Distribution of Interconnects Under Constant-Current and Temperature Stress
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., When the gas phase is at constant temperature
- ASHRAE DA-07-068-2007 The effects of thermostat Setback and Setup on Seasonal Energy Consumption@ Surface Temperatures@ and Recovery Times at the CCHT Twin House Research Facility
Korean Agency for Technology and Standards (KATS), When the gas phase is at constant temperature
- KS C IEC 60512:2009 Identification by hour numbers of the phase conductors of 3-phase electric systems
- KS B ISO 21010:2006 Cryogenic vessels－Gas/materials compatibility
- KS B ISO 21010:2018 Cryogenic vessels－Gas/materials compatibility
- KS B ISO 21010-2023 Cryogenic Vessel Gas/Material Compatibility
- KS B ISO 23551-9:2019 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 9: Mechanical gas thermostats
- KS C IEC 60601-2-20:2011 Medical electrical equipment－Part 2－20：Particular requirements for the basic safety and essential performance of infant transport incubators
- KS C IEC 60601-2-20:2017 Medical electrical equipment－Part 2－20：Particular requirements for the basic safety and essential performance of infant transport incubators
- KS I ISO 14080:2019 Greenhouse gas management and related activities — Framework and principles for methodologies on climate actions
- KS C IEC 60601-2-19:2011 Medical electrical equipment－Part 2-19：Particular requirements for the basic safety and essential performance of infant incubators
- KS C IEC 60601-2-19:2017 Medical electrical equipment－Part 2-19：Particular requirements for the basic safety and essential performance of infant incubators
KR-KS, When the gas phase is at constant temperature
- KS C IEC 60512-2009 Identification by hour numbers of the phase conductors of 3-phase electric systems
- KS B ISO 21010-2018 Cryogenic vessels－Gas/materials compatibility
- KS B ISO 23551-9-2019 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 9: Mechanical gas thermostats
- KS C IEC 60601-2-19-2017 Medical electrical equipment－Part 2-19：Particular requirements for the basic safety and essential performance of infant incubators
- KS I ISO 14080-2019 Greenhouse gas management and related activities — Framework and principles for methodologies on climate actions
CEN - European Committee for Standardization, When the gas phase is at constant temperature
- EN 1797-1:1998 Cryogenic Vessels - Gas/Material Compatibility - Part 1: Oxygen Compatibility
International Organization for Standardization (ISO), When the gas phase is at constant temperature
- ISO 21010:2004 Cryogenic vessels - Gas/materials compatibility
- ISO 21010:2017 Cryogenic vessels - Gas/material compatibility
- ISO 21010:2014 Cryogenic vessels - Gas/materials compatibility
- ISO 23551-9:2015 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 9: Mechanical gas thermostats
- ISO 23551-9:2022 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 9: Mechanical gas thermostats
- ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
- ISO/DIS 14068 Greenhouse gas management and climate change management and related activities — Carbon neutrality
- ISO/FDIS 14068:2011 Greenhouse gas management and climate change management and related activities — Carbon neutrality
- ISO 15927-2:2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load
- ISO 14080:2018 Greenhouse gas management and related activities - Framework and principles for methodologies on climate actions
Professional Standard - Meteorology, When the gas phase is at constant temperature
- QX/T 91-2008 Observation methods of indoor microclimate.air temperature,relative humidity and indoor-outdoor-air temperature difference
VN-TCVN, When the gas phase is at constant temperature
- TCVN 7303-2-20-2007 Medical electrical equipment.Part 2-20: Particular requirements for the safety of transport incubators
SAE - SAE International, When the gas phase is at constant temperature
- SAE AMS5337B-1995 Steel, Maraging, Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated UNS J93150
- SAE AMS5337E-2017 Steel@ Maraging@ Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized@ Overaged@ and Solution Heat Treated (UNS J93150)
CL-INN, When the gas phase is at constant temperature
ESDU - Engineering Sciences Data Unit, When the gas phase is at constant temperature
- AERO 00.03.26 A-1973 Wall and average gas temperatures for subsonic turbulent flow with heat transfer in ducts of constant circular cross section.
中国气象局, When the gas phase is at constant temperature
- QX/T 626-2021 Digitized records of air pressure, temperature, and relative humidity on self-recording paper
Professional Standard - Petroleum, When the gas phase is at constant temperature
- SY/T 7502-1999 Chromatographic composition analysis of oil-field gas by cryogenic condensation sampling
American Society for Testing and Materials (ASTM), When the gas phase is at constant temperature
- ASTM F1506-10 Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
IN-BIS, When the gas phase is at constant temperature
Underwriters Laboratories (UL), When the gas phase is at constant temperature
- UL 1563-1992 Electric spas, equipment assemblies, and associated equipment
- UL 1563-1996 Electric spas, equipment assemblies, and associated equipment
Professional Standard - Commodity Inspection, When the gas phase is at constant temperature
- SN/T 2754.10-2011 Loop-mediated isothermal amplification detection method for pathogens in export food.Part 10:Clostridium perfringens
Professional Standard - Machinery, When the gas phase is at constant temperature
- JB/T 14414-2023 Internal combustion engines — Isothermal quenched bainite cylinder liners — Metallographic inspection
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, When the gas phase is at constant temperature
- GB/T 30518-2014 Determination of dissolved residues of liquefied petroleum gases.High temperature gas chromatographic method
国家质量监督检验检疫总局, When the gas phase is at constant temperature
- SN/T 4439-2016 Determination method of boiling point distribution of crude oil - high temperature gas chromatography
ES-UNE, When the gas phase is at constant temperature
- UNE-ISO 14080:2019 Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions
Electronic Components, Assemblies and Materials Association, When the gas phase is at constant temperature
- ECA SP 5156-2007 Temperature Life With or Without Electrical Load Test Procedure for Electrical Connectors and Sockets To be published as ANSI/EIA/ECA-364-17C
International Electrotechnical Commission (IEC), When the gas phase is at constant temperature
- IEC 60601-2-19:2009 Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., When the gas phase is at constant temperature
- IEEE P370/D5-2019 Electrical Characterization of Printed Circuit Board and Related Interconnects at Frequencies up to 50 GHz